The building products industry...
Transcript of The building products industry...
Laurent ORTAS AIMCC
The building products industry approach
Proposal and commitments for a common methodology
to describe building products & systems
AIMCC for BuildingSmart International Tokyo, October 15-18, 2012
Vincent Garreau Laurent Ortas
Copyright Vincent Garreau for AIMCC; all rights reserved
2
Building Information Modeling
=> Besides great achievements, a lot remains to be done Copyright Vincent Garreau for AIMCC; all rights reserved
3
It was a great start, fueled by a vision, a desire to move forward, a will to share
Many champions have overcome many hurdles, and results are showing in several parts of the world
But the landscape and the rules of the game must now have all onboard and similar definitions everywhere to ensure worldwide success & exchanges
bredde
breite
largeur
Copyright Vincent Garreau for AIMCC; all rights reserved
4
It is true for other worldwide played sports
SOME BALL SPORTS
Copyright Vincent Garreau for AIMCC; all rights reserved
5
50 M
40 M
30 M
20 M
10 M
It is true for every worldwide-used network
=> and many value-bringing businesses can flourish around Years 1 2 3 4 5 6
Google+ MySpace Twitter Facebook LinkedIn
Key Success Factors -Open -Free -Single set of acceptable working rules applying to all
Copyright Vincent Garreau for AIMCC; all rights reserved
6
It can be true for the building industry too
Key Success Factors -Open -Free -Single set of acceptable working rules applying to all
Copyright Vincent Garreau for AIMCC; all rights reserved
7
Designers Engineers
Builders
Autho rities
Devel opers
Editors
Without a common method to describe properties of building products, compatible with industry needs, BIM is likely to remain
for a long time a series of country or project specific design tools, not a working standard for the building industry
UK Dictionary
Norway Dictionary
Japan Dictionary
US Dictionary
bSDD Procurers
Distri buters
Manu facturers
IFC
Copyright Vincent Garreau for AIMCC; all rights reserved
8 Locally Internationally
Common Method
to define properties
UK Dictionary
Norway Dictionary
Japan Dictionary
US Dictionary
Procurers
Designers Engineers
Distri buters
Autho rities
Devel opers
Editors
Manu facturers
Builders
A common method to describe properties of building products requires inputs from manufacturers, trade, maintenance, based on
actual experience and real products, even for virtual buildings
Copyright Vincent Garreau for AIMCC; all rights reserved
9
Common Method
to define properties
UK Dictionary
Procurers
Designers Engineers
Norway Dictionary
Japan Dictionary
US Dictionary
Builders
Distri buters
Autho rities
Devel opers
Locally Internationally
Editors
Manu facturers
It can benefit from previous work, on-going initiatives and be federated by relevant organizations already in place
Copyright Vincent Garreau for AIMCC; all rights reserved
10
New Non-Residential large projects in specific countries
New non-Residential medium size projects in more countries New Multi-family large residential projects in specific countries
New Medium size projects both residential and non, more areas Maintenance and Renovation of non-residential
New single family dwellings homes Most Non-Residential both new and renovation
Most new construction and renovation work worldwide
To ensure BIM role in eventually driving the sector
Copyright Vincent Garreau for AIMCC; all rights reserved
11
Today: multiple dictionaries, well conceived from a specific purpose, difficult to exchange due to different definitions & interests
Laurent ORTAS AIMCC
standard-GS1 Trade
ISO-IFD Product/System
Design
ISO-IFC Building Design
ISO-Ecl@ss Maintenance
Other uses … Classification
with properties, mainly
Electromechanical
BsDD Glossary
of properties, mainly design-driven,
with add-on of properties
ad-hoc
No dictionary or glossary
Glossary of properties,
mainly commercial & logistics
Dictionaries of
Properties
Copyright Vincent Garreau for AIMCC; all rights reserved
12
Tomorrow: the landscape and the rules of the game to bring all onboard, thanks to common definitions everywhere
Laurent ORTAS AIMCC
Compatible International
Reference Glossary
of properties
standard-GS1 Trade
ISO-IFD Product/System
Design
ISO-IFC Building Design
ISO-Eclass Maintenance
Other uses, …
ISO Common methodology
to define building products and systems
Copyright Vincent Garreau for AIMCC; all rights reserved
13
Industry
Trade
Ecosystem for exchange
Sync. data
Industrials need a single format of product descriptions suitable for all stakeholders’ operating purposes
Orders, Delivery notes,
Invoices EDI
Order EDI
Synchronised negociated prices
Sync. data
Ease & Efficiency of exchanges on the value chain for all stakeholders
EDI: Electronic Data Interchange
Design Architects Engineers
Economists…
General Contractors
Building Developers
Copyright Vincent Garreau for AIMCC; all rights reserved
14
Proposing an AIMCC-Mediaconstruct project to AFNOR for a methodology to describe properties of products/ systems
Laurent ORTAS AIMCC
Compatible Glossary
of properties (In France: DTH)
standard-GS1 Trade
ISO-IFD Product/System
Design
ISO-IFC Building Design
ISO-Ecl@ss Maintenance
Other uses, …
ISO-based AFNOR Common methodology
to define building products and systems
=> We are determined to give our vision a shot, starting in France with an International ISO/CEN mindset
Copyright Vincent Garreau for AIMCC; all rights reserved
15
Méthodologie de définition et gestion des caractéristiques descriptives des produits de
construction pour les applications numériques BIM et autres
Presentation to AFNOR & French Building value chain partners Paris, October 5, 2012
Commission normalisation AFNOR/PPBIM « catégorisation et gestion des propriétés des produits de construction »
Instruction I 2012/66, CoS Construction & Urbanisme
=> A joint initiative of AIMCC and Mediaconstruct, the French BSI Chapter Copyright Vincent Garreau for AIMCC; all rights reserved
16
Design Architects Engineers
Economists…
Industry
Trade Standard: e-cl@ss) (building maintenance)
Standard: ? (product description via properties)
Standard: GDS (commercial exchanges)
Standard: IFC (ISO)
(building design)
Ecosystem for exchange
General Contractors
Building Developers
There is no unique format to describe products for a shared usage and benefit among all stakeholders
Copyright Vincent Garreau for AIMCC; all rights reserved
17
? What does AIMCC offer?
That BuildingSmart, eCl@ss and GS1 put their knowledge in common to elaborate a reference glossary
to describe products & sytems
1 – sharing a methodlogy = project with
2 – sharing & harmonization of properties used so far by everyone according to the methodology
3 – mutualized use of this work
Copyright Vincent Garreau for AIMCC; all rights reserved
18
IFC
Glossary of useful properties or characterisitics
to describe products for smooth exchanges
among building sector stakeholders
General framework of rules to integrate properties
An open approach proposed by AIMCC
Ma
Co
No
A
B
C
D
E
F
G
H
…
GS1
eCl@ss
BuildingSmart & GS1 & eCl@ss + standardized process & contributors General framework of rules
to define and manage properties
General framework
of rules to define and manage properties
Manufacturers’ associations + professionals + exchange standards’ maintenance groups
Local – Regional (Europe) - World
Uses
A C B D
Copyright Vincent Garreau for AIMCC; all rights reserved
19
=> A product property or characteristic cannot include any risk of misinterpretation
Differences between dimensions of manufactured and installed product
Differences between dimensions of packaged and installed product
Standardized definition of properties
Copyright Vincent Garreau for AIMCC; all rights reserved
20
Ma
Co
No
A
B
C
D
E
F
G
H
…
Professional representatives
Glossary of properties
Identity properties of the ^product Relevant Technical properties
An open approach proposed by AIMCC
BuildingSmart & GS1 & eCl@ss + standardized process & contributors
Comparing requirements with product values
Manufacturers Catalogues = attribute values to properties
Integration process of properties in IFC model
via IFD rules ?
Requirements of project → product identification search process = IFD
M2
C2 15
N2
20
62
Ma
Co
No
15
20
62
General framework of rules to
integrate properties
BuildingSmart = BIM developments Professionnals = BIM uses
Ma M1
Co C1
No N1
A 1
C 21
F 6
J
L
…
Ma M1
Co C1
No N1
A 15
C 20
F 62
J
L
…
Ma M1
Co C1
No N1
A 2
C 11
F 11
J
L
…
Identity properties of the ^product
Technical properties
General framework
of rules to define and manage properties
A D C B
Copyright Vincent Garreau for AIMCC; all rights reserved
21
(0) accord de collaboration IFC/Médiaconstruct, GS1/GS1France, eclass/AFIM, AIMCC (1) Thermique, acoustique, marques qualité. (2) + feu euroclasse, environnement EN 15 804. (3) test dédoublonnage. (4) Option 1 norme NF la France fait puis porte le projet vers d'autres pays. Option 2 norme CE, d'autres pays participent au projet (5) protos = paramétrage d'un progiciel de Product Information Management. Licence gratuite pour exploitation dictionnaire avec présence de la marque de l'éditeur. Ce proto ne comporte aucun engagement, il y aura par la suite un appel d'offre
Calendar10 11 12 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4
AFNOR Monthly Meetings 5 13 13 TBC TBC TBC TBC TBC TBCAFNOR : Joint-proposql for collaboration in France (0)AFNOR : Property definition optimization (0)AFNOR : Property management system developmt (0)Prototype tool for tests AIMCCPresentation of prototype at (5) 23AFNOR Methodology for tests + public poll (0) + testersAFNOR validation of norm standardization + publicationCreation of Maintenance agency for FranceField Pilot for Daily handlingTool validation Data compilation F (1) AIMCC + Product room France AIMCC + Product room FData compilation CE (2) AIMCC + Product room France AIMCC + Product room FData compilation GS1 AIMCC + GS1Data compilation ecl@ss (3) AIMCC + AFIMInfo + Transfer to other country/ies (4) Option 1 InfoInteraction with other country/ies (4) Option 2 Info
Promotion plan (TBD)Training schedule AIMCCCertification of BIM software and e-catalogues Médiaconstruct
2012 2013 2014
Tentative Calendar
Copyright Vincent Garreau for AIMCC; all rights reserved
22
Co-presidence: AIMCC-Médiaconstruct Goals A – AFNOR methodology (1) B– Testing AFNOR method (1) B' – CC tool selection for glossary/dictionary C – Compile properties as per AFNOR method Phase 1 : thermal, acoustics, environment, fire, CE, quality labels, etc Phase 2 : GS1 Phase 3 : eCl@ss Phase 4 : transfer to other countries D – Maintenance of data:properties for France (1) E – Process to integrate properties in IFC model E' - Process to integrate properties in GS1, eClass models (outside product room) F – Certification of software and e-catalogues : tests of exchanges G – E-catalogues : self-appropriation by industrials, training & support (AIMCC, Edibatec, Pluristop, Atita...) (outside product room) (1) With help from GS1 & eCl@ss)
Creation Product Room France (mirror to International Product Rooom)
Copyright Vincent Garreau for AIMCC; all rights reserved