The brand that delivers - The Automotive Technician · the solder-free LOKRING tube connection...
Transcript of The brand that delivers - The Automotive Technician · the solder-free LOKRING tube connection...
One of the biggest challenges in a vehicle a/c workshop is the safe and
accurate tracing and repairing of refrigerant leaks.While many methods for detecting leaks have been available, most have some disadvantages. Small leaks are difficult to locate and leak detection can only be carried out with the a/c systems filled. Sometimes conventional leak detection systems react to other external gases which results in wrong information and that makes the job difficult.The LOKTRACE leak detection system which has been in use for many years combines all of the advantages of existing leak detection methods, and none of the disadvantages of most conventional methods.With LOKTRACE, the a/c system is filled with a special gas known as LOKTRACE gas, a mix of 95 per cent nitrogen and 5 per cent hydrogen. It’s non-toxic, not harmful to the environment and non-flammable.The hydrogen is used as the tracer gas. A vehicle’s a/c system is filled to a pressure of between 5 and 7 bar. Leaks can be localised with the aid of the LOKTRACER TLD.500 or TLD.1000 hydrogen leak detectors. The LOKTRACER reacts exclusively to hydrogen, which means that there are no cross-sensitivities.
This makes leak detection extremely reliable. Hydrogen molecules are
the smallest naturally occurring particles and escape from the tiniest of leaks. Consequently, the LOKTRACER can detect very small leaks. Since
hydrogen is lighter than air, the hydrogen molecules rise
and the tubes can easily be checked from above.
Once a leak is detected, the solder-free LOKRING tube
connection system comes into play. Conventional methods such as soldering, welding or thread cutting are time consuming, cause damaging soiling and can lead to weak spots in the refrigerant circuit. A combination of the LOKRING and LOKCLIP makes it possible to connect a range of different materials to one another – without diminishing the quality of the connection.
The patented LOKRING system makes repairs to refrigerant lines both straightforward and inexpensive. Car manufacturers
have relied on this clean connection for many years, which explains why many vehicle a/c systems are equipped with LOKRING connections from the outset.
A long, hot summer is forecast for Australia, so now would seem to be the appropriate time to gear up for a busy a/c repair workload with the correct tools, knowledge and experience.
The Automotive Technician 30
Brought to you by Essential Service Programs
ESSENTIAL SERVICE PROGRAMS
The Euro Roller MF-100 exhaust fi lter is tested and certifi ed in the European Union. Fitted directly to the exhaust tailpipe, it controls toxic exhaust gases instantly. Replaceable fi lter cartridges provide approximately 280 uses for petrol vehicles and 120 for diesels.
Make sure your employees are working in an exhaust free environment.
wwww.esppro.comm.au | 02 99911 40040
Every leak leaves a trace
but not all detection systems can tracethem
www.ozwiderentals.com.aucheck out our online catalogue
THE NEW GENERATION in RATCHETING WRENCHESTHE NEW GENERATION in RATCHETING WRENCHES Deeper Gear Teeth enables stronger torque
72 teeth fine tooth ratchet mechanism for a 5º swing arc
Small head profile & manufactured from Chrome Vanadium steel
Part Number and Size stamped into the body for quick identification
Drives on the flats not the corners for better fastener engagement
COMBINATIONCOMBINATION
Available in metric sizes 6mm - 34mm and AF 1/4 - 1-1/8”
REVERSIBLE REVERSIBLE
Available in metric sizes 6mm - 24mm and AF 1/4 - 1inch
FLEXFLEX--HEADHEAD
Available in metric sizes 8mm - 25mm and AF 1/4 - 1inch
STUBBYSTUBBY
Available in metric sizes 6mm - 19mm and AF 3/8 - 3/4”
SCREWDRIVERSCREWDRIVER
3 position Ratcheting ScrewDriver Handle that can be altered to pistol grip. Supplied with an assortment of Slotted & Phillips® bits
Manufactured in Taiwan
Unique Patented ratcheting mechanism
Can be opened to slip over the brake line & closed to fit around the brake pipe completely
Unique geometry that allows to work on rounded & worn nuts, and even a tighter grip on rusted nuts
Available in metric and AF sets
LINE WRENCH Ratcheting Flare Nut Wrench
PRECISION SPECIALTY TOOLING PTY LTD visit www.pretooling.com.au for more detailed information
Phone 03 9416 7077 Fax 03 9416 7096 email [email protected]
The World leader in Specialty Tools - Inspection Mirrors, Magnetic Pick Up Tools, Hook & Picks, LED Lighted tools & Rotating Work Lights
Ullman telescopic tools have a longer & stronger lightweight stainless steel shaft
Rotating Magnetic Worklight available in 24 or 48 LEDs
Thanks to our sponsors
The full range for the local marketFrom Mini to Mack Shock Absorbers by SACHS
SACHS Shock Absorbers are trusted by lea-
ding vehicle manufacturers in both pas-
senger and commercial vehicles.With
the full aftermarket range for cars, utes,
buses and trucks, SACHS has the application for
your vehicle.
www.zf.com/au
tat 12.indd 1 27/03/2012 11:40:41 AM
SPX Service Solutions Head Office
Customer [email protected]
03 9544 6222
Mark WhiteSales Executive
VIC/TAS/[email protected]
0400 506 233
Rod GraingerSales ExecutiveNSW/WA/ACT
[email protected] 006 725
Kevin DoveSales Executive
0400 947 116
• The most advanced A/C machine on the market• Service Conventional-Hybrid-Electric Vehicles• Fully automatic - SAE-J2788 compliant• Flush the vehicles A/C system (34988i)• Extreme charge accuracy +/-14 grams
The 34788i & 34988i has a patented recovery system that after normal recovery is reached at 0-psi then the vacuum pump and compressor work in tandem to create a “deep recovery” capturing over 95% of the R134a, most non SAE J2788 machines recover 60-75% with R134a vapour being vented to the atmosphere.
“The new machines (SAE J2788) recover an average of 120 grams more HFC-134a refrigerant.Over its lifetime, each machine will recover an average of 200kg additional HFC-134A refrigerant...”
MACS Worldwide Vol.3 May 23, 2007
Hybrid and Conventional A/C Service RRR Machines
The Complete Diagnostic Hub
• Australian, Asian, European, American and Chinese vehicle coverage
• Wireless automatic updates (through shop internet connection)
• Large touch screen, fold-down screen, semi-ruggedised• System Search where supported by the vehicle• Easy to use software• Read and erase DTC’s• Graph and record multiple lines of live data• Actuation tests & adaption component installation• Idle relearns, diesel injector coding, diesel pump
initialisation, DPF regeneration function, Steering angle sensor calibration
• Manufacturer specific functions• Optional: High Speed 2 Channel Scope, 4/5 Gas analyser,
495/01 Diesel Smokemeter, USB Bore Scope
Call to arrange a demo
34988-iFully AutomaticIncludes 34411-AUS vehicle database normally $250For a limited time
34788-iAutomatic
It pays for itself!
PC-VCi
SPX Service Solutions Head Office
Customer [email protected]
03 9544 6222
Mark WhiteSales Executive
VIC/TAS/[email protected]
0400 506 233
Rod GraingerSales ExecutiveNSW/WA/ACT
[email protected] 006 725
Kevin DoveSales Executive
0400 947 116
• The most advanced A/C machine on the market• Service Conventional-Hybrid-Electric Vehicles• Fully automatic - SAE-J2788 compliant• Flush the vehicles A/C system (34988i)• Extreme charge accuracy +/-14 grams
The 34788i & 34988i has a patented recovery system that after normal recovery is reached at 0-psi then the vacuum pump and compressor work in tandem to create a “deep recovery” capturing over 95% of the R134a, most non SAE J2788 machines recover 60-75% with R134a vapour being vented to the atmosphere.
“The new machines (SAE J2788) recover an average of 120 grams more HFC-134a refrigerant.Over its lifetime, each machine will recover an average of 200kg additional HFC-134A refrigerant...”
MACS Worldwide Vol.3 May 23, 2007
Hybrid and Conventional A/C Service RRR Machines
The Complete Diagnostic Hub
• Australian, Asian, European, American and Chinese vehicle coverage
• Wireless automatic updates (through shop internet connection)
• Large touch screen, fold-down screen, semi-ruggedised• System Search where supported by the vehicle• Easy to use software• Read and erase DTC’s• Graph and record multiple lines of live data• Actuation tests & adaption component installation• Idle relearns, diesel injector coding, diesel pump
initialisation, DPF regeneration function, Steering angle sensor calibration
• Manufacturer specific functions• Optional: High Speed 2 Channel Scope, 4/5 Gas analyser,
495/01 Diesel Smokemeter, USB Bore Scope
Call to arrange a demo
34988-iFully AutomaticIncludes 34411-AUS vehicle database normally $250For a limited time
34788-iAutomatic
It pays for itself!
PC-VCi
Expanded tuning capability at a fraction of the cost
The all new Dynotech 4WD19 INDUSTRY COURT, LILYDALE VIC, 3140, AUSTRALIA TEL: + 61 3 9735 8900 FAX: + 61 3 9739 5833 EMAIL: [email protected]
W W W . D Y N O . C O M . A U
The standard in auto parts
Range
Quality
Technology
Innovation
The brand that delivers
Steering & Suspension
Radiators, Condensers
Water Pumps, Coolant
Power Steering
Hydraulics
Disc Pads & Shoes
Disc Rotors & Drums
Clutch Components
Driveline
www.atap.com.auReseller Enquiries 03 8369 1300ATAP - Australia’s leading stockist of quality components
Delivering profitability to resellers
New Protex Ad 2012 TAT.indd 1 25/09/2012 11:52:53 AM
VULKAN Industries Far East Pte Ltd | 12 Wollong St, PO Box 790 | Gosford NSW 2250 | AustraliaPhone + 61 2 43 22 85 33 | Mail [email protected] | www.vulkan.com
FIND THE LEAK - REPAIR THE LEAKWITH LOKTRACE, LOKRING AND LOKCLIP
Anzeige_Australien.indd 2 21.09.12 13:11
Protect engines, transmissions and power steering against heat stroke!
For more information call 1800 463 646 (free call) or visit www.drivetech.com.au
Drivetech oil coolers are available for engine, transmission & power steering. The range contains cores, universal fitment kits & model specific kits. Also available is a range of accessories to fit coolers to most vehicles.
Low pressure drop
Aluminium alloy for maximum corrosion resistance
Durable brazed aluminium construction
Benefits:
Extends system life
Prevents overheating of engine, transmission or steering system
Reduces heatstroke of transmission during towing
Improves fuel economy