www.AIMmachines.comFORMING OUR FUTURE WITH YOURS

THE BEST PERFORMANCE IN WIRE AUTOMATIONTHE BEST PERFORMANCE IN WIRE AUTOMATION

cold header

AUTOMATION IN COLD HEADINGServo Cold Header Units, ready to Integrate with your AIM 3D Machines.

AFSCH-12AFSCH-45AFSCH-70

SERVO COLD HEADER SOLUTIONS

Model AFSCH-12 AFSCH-45 AFSCH-70

Wire Diameter Range (mm) 6 10 14

Wire Diameter Range (inches) .25 .4 .56

Force

Maximum Heading Force (US ton) 12 45 70

Maximum Heading Force (Metric ton) 11 40 64

Maximum Clamping Force (US ton) 36 135 210

Maximum Clamping Force (Metric ton) 33 123 191

Set-Up time (Minutes)

Typical Cold Heading Cycle Time (Seconds) 6 6 6

Power

Number of servo axes 4 4 4

Average Power Consumption (kWh) 1.7 2.6 3.2

Electrical requirement 50/60 Hz 400V or 460V, 3 phase - all models***

Total Installed Power (kVA) 25 36 45

Dimensions & Weight

Width, Depth & Height (meters) 1.02 x 2.44 x 1.65 1.02 x 2.44 x 1.87 1.02 x 2.44 x 1.87

Width, Depth & Height (inches) 40 x 96 x 63.8 40 x 96 x 73.6 40 x 96 x 73.6

Gross weight (Kg)

Gross weight (Lbs.) 5,000 6,200 7,500

AIM, Inc.14103 McCormick Drive,Tampa, FL 33626U.S.A.Tel: +1 813.818.8222sales@aimmachines.comSkype id: aimincusa

AIM Europe S.A.Kapetan Korela 16Nea Kiffisia, Attiki 14564GREECEPhone: +30.21300.58004sales@aimeuropesa.comSkype id: aimeuropesa

www.AimMachines.com

Automated Industrial Machinery

AccuForm Servo Cold HeaderAFSCH-12AFSCH-45AFSCH-70

Automated Industrial Machinery, Inc. ©2020The Manufacturer Reserves the right to alterany data and/or photos provided in thisbrochure without notice.

For online videos visit:www.youtube.com/wirebenders

*** Typical current consumption while running parts on benders is ~10 to 25% of the full load rating

The cold header can handle heavy materials, such as stainless steel, while creating high quality end forms.Three Models are offered: AFSCH-12, AFSCH-45 and AFSCH-70

The Servo Cold Header Module is positioned in-line with the bending arm, in front of a CNC Bender. Mounted on precision rails and driven by a servo motor with an absolute encoder, the unit can be positioned in pre-determined locations or pulled away from the bender when not in use, minimizing the setup time required.Tube users: AIM developed a new Tube Cutter option for fast and clean tube cuts which mount directly on the solid wire cutter location.

FeaturesControlled by AIM Inc.’s SmartEditor® softwareFour Servo Axis, all digital.End of stroke/return stroke sensorsQuick change toolingAutomatic lubrication systemProgrammable position also allowing for large part clearanceTooling designed to part specificationsBoth Tube and Solid materialEnd forming and Collar forming

BenefitsCold forming of single and double upset profilesReduce production costs by eliminating additional parts handlingIntegrated cold header wire form operation

AIM, Inc.502 S. Vista AvenueAddison, IL 60101-4423U.S.A.Tel: +1 630.458.0008sales@aimmachines.comSkype id: aimincusa

2,270 2,810 3,400