THE 1˜TO˜3 POWER SOURCE™ WITH VELVET START™€¦ · SINGLE-PHASE MOTORS LARGE HORSEPOWER LOW...
Transcript of THE 1˜TO˜3 POWER SOURCE™ WITH VELVET START™€¦ · SINGLE-PHASE MOTORS LARGE HORSEPOWER LOW...
THE WORLDS ONLY SINGLE-PHASELARGE-HORSEPOWER MOTORS
• Single-Phase Input• True Balanced Three-Phase Output• Total Electrical Isolation• Eliminates Flicker and Line Sags• High E�ciency• Rugged Reliability• Unity PF Motor Input• Low Harmonic Motor Input• Synchronous @ 1800 rpm• Capable of supporting multiple 3-phase drives• Three-Phase Motor Starting Isolated from Line• Runs Three-Phase Loads up to Total kW Rating• Cost E�ective System Design
CHARACTERISTICS
Demand for three-phase power is growing much faster than the availability of three-phase service. Many agricultural, telecommunications, industrial and municipal applications are best powered by three-phase equipment. However, in most rural and remote areas, only single-phase service is available. The 1-to-3™ Power Source solves this problem. Using the revolutionary BELLE Single-Phase Motor™ with Written-Pole® technology, the 1-to-3™ avoids high fuel and maintenance costs, and pollution of fossil-fuel-powered engines. It delivers superior power quality to that of conventional phase converters and is far more cost e�ective than extension of three-phase service for both utilities and their customers, providing bene�ts across a broad spectrum of applications.
COST EFFECTIVEThe 1-to-3™ avoids the need for extending three-phase distribution. Where single-phase service already exists, upgrading the lines to three-phase typically costs $50K - $100K per mile. By using the 1-to-3™ to provide power for three-phase applications from existing single-phase service, utilities and their customers can save signi�cant costs for investment in �xed assets.
THE 1-TO-3 POWER SOURCE™ WITH VELVET START™Three-Phase Micro-Grid Utilizing Single-Phase Utility Without VFD - 50 / 65 / 90 kVA Models
SAVINGSThe Written-Pole® motor driving the 1-to- 3™ is highly e�cient, resulting in full load system e�ciency exceeding 88%. This alone can reduce energy costs by thousands of dollars, year after year. And since the 1-to-3™ input runs at unity power factor, there is no power factor penalty charge. In some areas, this translates into signi�cant additional savings.
LOW MAINTENANCEThe 1-to-3™ can be used e�ectively in place of the diesel or gas engines that are often used as the prime movers for pumps or generator sets. The Written-Pole® motor requires very little maintenance compared to engines. Air and noise pollution are also reduced. Most importantly, reliability is greatly improved.
POWER QUALITY IMPROVEMENTSThe 1-to-3™ allows weak single-phase lines to deliver strong three-phase power with excellent voltage regulation and precise 60 Hz frequency. The generator output voltage provides well-balanced three-phase power capable of starting and running large three-phase motors or power quality-sensitive electronic controls. This equipment isolates the application (and the utility) from harmonics that are harmful to sensitive loads.
CALL US 877-430-5634sales@sppowersolutions.comwww.sppowersolutions.comProudly Made in the U.S.A.©2017 Single-Phase Power Solutions. All rights reserved.
SINGLE-PHASE MOTORSLARGE HORSEPOWER
LOW STARTING CURRENT AND HIGH EFFICIENCYWritten-Pole® motors start using less than 2x their rated running current. This eliminates excess voltage sag or “�icker” that can cause problems on distribution lines. The e�ciency rating of the motor is 95.5% and the generator e�ciency is 93.5%, resulting in an overall e�ciency of 89%, with 100% electrical isolation. With the 1-to- 3™ Power Source, customers served by single-phase lines can get high-quality power for three-phase applications. Unlike conventional phase converters, the 1-to-3™ provides true, balanced three-phase power, eliminates disruptive harmonic feedback, is a unity power factor load to the utility and, with an added �ywheel, can ride through momentary power interruptions with ease.
PERFORMANCEBELLE Written-Pole® Motor (Input) Driving a Rugged Three-Phase Generator (Output)
• Written-Pole motors are well suited for conversion of single-phase to three-phase power. A Written-Pole single-phase motor can drive a three-phase conventional generator to produce clean, balanced voltage.
• The 1-to-3 (phase converter) can start multiple smaller three-phase motors. The 1-to-3 can start a single motor up to about 65% of its rating and other smaller motors up to its output rating.
• Because of the high load synchronizing capability of the Written-Pole drive motor, a large �ywheel can be added to greatly improve the motor starting capability of the three-phase generator.
Output Power
Output: 3Ф, 60 Hz
208 V:
240 V:
480 V:
Input Current
Starting Current
Ambient Starting
Temp. Range
Weight (Total)
50 kVA (drives 50 HP)
139/111 A
120/96 A
60/48 A
103 A @ 460 V, 1Ф
205 A @ 460 V, 1Ф
4°C to 40°C
3500 lbs.
65 kVA (drives 65 HP)
180/144 A
156/125 A
78/63 A
128 A @ 460 V, 1Ф
255 A @ 460 V, 1Ф
4°C to 40°C
3700 lbs.
90 kVA (drives 90 HP)
250/200 A
217/173 A
108/87 A
170 A @ 460 V, 1Ф
340 A @ 460 V, 1Ф
4°C to 40°C
4200 lbs.
50 kVA/40 kW* 65 kVA/52 kW* 90 kVA/72 kW*
*Optional Ride-Through Flywheel available.