Thank You For The Opportunity To Introduce ACMT Inc. Specializes In The Following Products And...

Thank You For The Opportunity To Introduce

ACMT Inc. Specializes In The Following Products And Processes

AdChem Manufacturing Technologies, Inc.

Distribution and Repackaging of Specially Formulated Materials

Specialty formulating and packaging ranging from 10cc syringes to 5 gallon containers of the following

– Silicones & silicone fluids, epoxies, polyurethane's

– Sealants– Resins– Thread locking– Specialty and reagent

grade chemicals


Bonding

Rubber to metal bonding Rubber to composite

bonding– Insulating coatings– Vibration dampening– Wear resistance

Epoxy bonding Composite component

assembly and repair Rubber molding Plastic injection molded

assemblies


Component Fabrication

Component manufacturing and fabrication

In house tool design and fabrication 3 axis CNC machining

– Hot & cold metal forming– Surface coating & paint– Titanium Hot Forming– Acid Clean line– CNC press break forming– Titanium and Nickel welding

both resistance and fusion.


Molding

Silicones, urethanes & epoxies

Compression and transfer molding

On staff design and tool fabrication team to satisfy your molding needs

Plastic injection mold assemblies


Overhaul and Repair

Fully equipped overhaul & repair shop

– Rubber replacement– Tear down & reassembly– Welding– Machining– Blend & de-burr

FAA repair # H03R013Y


Welding

Seam Welding, Spot Welding, Titanium Welding, Full resistance

welding capabilities

NADCAP 124956


OMAX Water Jet Two-axis high-pressure

abrasive water jet cutting system Certified Process

– can work with a wide variety of materials, ranging from metals to ceramics, composites, glass—even marble and granite.

Mazak X48 Laser

2D Flat Pattern Cutting

MAZAK Super TURBO X-48, 4' x 8' Sheet Capacity, 1500 Watt,

Certified Process

MAZAK L-32 CNC


Quality Assurance

State of the art scanning CMM inspection

Airfoil Inspection/correlation ISO9001:2000 registered AS9100:2004 registered FAA Repair Station H03R013Y Pratt & Whitney engineering

source approved (ESA) NADCAP Accredited State of the art clean rooms for

both Silicones and Non-silicones


Complete Laboratory Capabilities

In-house full service laboratory for metal and non-metal with destructive and non-destructive testing capabilities.


Material Testing

Full in-house material testing Pratt & Whitney laboratory

controlled source (LCS) Testing urethanes, silicones,

epoxies, primers and adhesives

Tests performed to ASTM standards by experienced and knowledgeable lab technicians


Process Control

Complete process control through:

– Detailed photographic work instructions

– Extensive operator training

– Thermocouple and chart monitored cure cycles

– Periodic audits– In process inspections


Technical Assistance

Full engineering staff Complete design capabilities

using SOLIDWORKS, CADKEY, Unigraphics

– PWA airfoil capable Tool design and making

capabilities Fully accessible via the

internet at– www.acmtCt.com/


Contact Us

Phone – 800 729-3803

860 645-0592 Fax

– 860 533-3299 Email President/Sales [email protected]

Address: 369 progress drive, Manchester, CT. 06042


We Will Assist in the Design and Fabrication of any Metal or

Non-metallic Component Manufacturing and Assembly

Necessary to Fulfill Your Requirements.


Thank You For The Opportunity To Introduce ACMT Inc. Specializes In The Following Products And...

Documents

Transcript of Thank You For The Opportunity To Introduce ACMT Inc. Specializes In The Following Products And...