tf_85_series
-
Upload
lakshmi-nair -
Category
Documents
-
view
222 -
download
0
Transcript of tf_85_series
-
8/2/2019 tf_85_series
1/3
Moser Baer a-Si Thin Film Solar PV Modules
Product Datasheet For MBTF 85 Series
Moser Baer Thin Film Solar Modules are manufactured in a state of the art, fully automated line. The frameless
Glass-PVB-Glass modules are available in 1300x1100 mm2 configuration offering a range of power outputs
available for customer applications. These modules are ideal for large grid-connected photovoltaic and roof top
systems and provide excellent performance.
Technology
Single junction Amorphous Silicon (a-Si)Technology based modules
Monolithic cell to cell serial connection enabledvia laser technology
Manufactured using Applied Materials SunfabProduction Line
Product Features
The MTBF 85 series modules are available fromstabilized power of 76W to >88W in various 2 W
incremental bin sizes.
Frameless Glass-PVB-Glass modules with highlytranslucent soda lime glass
Modules available with the option of bondedback rails
Made from non-toxic materials and are easilyrecyclable
Performance
Moser Baer Thin Film Modules
Deliver stabilized power enabled by a highefficiency CVD process
Offer robust performance under a diverse set ofclimatic conditions
o Better performance under diffuse (low)light and indirect sunlight conditions
relative to C-Si modules.
o Generation of higher power relative toC-Si modules at higher temperatures
Dimensions of 1300 x 1100 mm2
size Module
-
8/2/2019 tf_85_series
2/3
Cross Section of a-Si Thin Film Module (thickness
not to scale)
Quality
High quality, reliable modules 100% inspection for mechanical and visual
defects with continued monitoring of electrical
performance
Six Sigma practices used in manufacturing line Certified for IEC 61646, IEC 61730. UL 1703 certification underway ISO 9001 certification underway
Warranty
Defect free material and workmanship with 5year limited warranty.
Performance guaranteeo 10 years at 90% of minimum stabilized
rated output power
o 25 years at 80% of minimum stabilizedrated output power
Typical Initial IV Characteristics (before and after
degradation) of a Quarter size module measured at AM
1.5 and 25C Cell Temp
Mechanical Data Units Column1
Dimension (L x W) mm 1300 x 1100
Surface Area m2
1.43
Thickness* mm 7.5
Weight ** kg 25 (55 lb)* Without Junction Box
** Without rails
Temperature Coefficient Units A
Maximum power % / C -0.2
Open Circuit Voltage % / C -0.33
Short Circuit Current % / C 0.09
Maximum Power Voltage % / C -0.32
Maximum Power Current % / C 0.14
Operating temperature range: -40C to +85
C
-
8/2/2019 tf_85_series
3/3
Units Bin > 88W Bin 86 W Bin 84 W Bin 82 W Bin 80 W Bin
Maximum Power ( Initial / Stablized** )
W >(106/88) (103/86)+2 (101/84)+2 (98/82)+2 (96/80)+2 (94
Power Output Tolerance % +/- 5 % +/- 5 % +/- 5 % +/- 5 % +/- 5 % +/-
Open Circuit Voltage, Voc V 95.7/93.8 95.2/93.3 94.4/92.5 93.5/91.7 92.7/90.9 91
Short Circuit Current, Isc A 1.6/1.5 1.56/1.43 1.52/1.4 1.48/1.36 1.5/1.37 1.4
Maximum Power Voltage, Vmp V 77.07/74.1 75.19/72.3 77.77/74.8 77.433/74.5 74.9/72.01 72
Maximum Power Current, Imp A 1.38/1.11 1.40/1.13 1.31/1.05 1.28/1.03 1.28/1.03 1.3
Maximum System Voltage V 1000 1000 1000 1000 1000 10
* At Standard Test Conditions ( STC ) 25 degree C , A.M 1.5 & Irradiance 1000 W / m2
** Stabilized power is 16.5 % lower than initial