Panels with battens

TEXTURED FINISH

| U.S. VERSION

General SpecificationsSUBSTRATE

• LP SmartSide®

MANUFACTURING

• Treated engineered lap siding strand substrate;

• Available in a textured finish.

PACKAGING

• Panels: 8’ or 10’ lenghts• Battens: 16’ lenghts

AVAILABLE COLORS

• Maibec solid stain color chart• Maibec ResistechTM Natural tones• Elite Extra solid paint. Unlimited choice of

solid colors, with our TrueMatch® system

FACTORY-STAINING

• Lap siding is factory-coated in a controlled environment for maximum paint absorption and retention. This also provides increased protection from the damaging effects of the sun and the elements.

INSTALLATION

• Battens can be installed over the not-grooved panels.

• You can use a 1" x 2" or a 1" x 3" batten.• A 1" x 3" batten is recommended for a 16"

OC spacing.

For installation requirements, see installation guide at maibec.com.

* Substrate thickness may vary +/- 1/16".

NOMINAL DIMENSION

GROOVES SUBSTRATE FINISHACTUAL DIMENSIONS

ACTUAL THICKNESS*

CONVERSION FACTOR FT2 TO PIECES

INSTALLATION

8‘ Not grooved Strand Textured 48,56" (123,4 cm) 7/16" 32 Vertically

10‘ Not grooved Strand Textured 48,56" (123,4 cm) 7/16" 40 Vertically

Batten 1" x 2" N/A Strand Textured 1,5" 5/8" N/A Vertically

Batten 1" x 3" N/A Strand Textured 2,5" 5/8" N/A Vertically

47,88"

48,56"

0,230" 0,375"

NOT GROOVED WITH BATTENS

5/8"

1 1/2"

† SEE THE CALCULATION METHOD UNDER THE SUPPORT TAB MAIBEC.COM

* SOME RESTRICTIONS APPLY. SEE DETAILED WARRANTIES.

LP® SMARTSIDE® ARE REGISTERED TRADEMARKS OF LOUISIANA-PACIFIC CORPORATION. ©2017-18 LOUISIANA-PACIFIC CORPORATION. ALL RIGHTS RESERVED. ® REGISTERED TRADEMARK PROPERTY OF MAIBEC INC. © COPYRIGHT - MAIBEC INC. JUNE 2020 A1818474A.1-US

WARRANTY* –SUBSTRATE

2020 YEARS ON

LABOR

MAIBEC RESISTECHTM

Some restrictions apply.*

3030 YEARS ON

PAINT

TRANSFERABLE WARRANTIESELITE EXTRA SOLID & NATURAL TONES PAINTS

WARRANTY*