Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 1 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

SUMMARY OF TEST RESULTS

TEST REQUESTED CONCLUSION REMARKEuropean Council Directive 2011/65/EU on the Restriction ofthe Use of Certain Hazardous Substances in Electrical andElectronic Equipment (RoHS)

PASS -

Phthalates Content – European Council Directive 2011/65/EUon the Restriction of the Use of Certain Hazardous Substancesin Electrical and Electronic Equipment (RoHS) with itsAmendments up to EU No. 2015/ 863 Annex II

PASS -

GUANGDONG ESTTECHNOLOGY CO., LTD.

Spark ZhangManager, Chemical Department

RT/ZHREMARKIf there are questions or concerns on this report, please contact the following persons:Report Enquiry: (86) 83081888 Ext. 618 E-mail: gdest@gdest.cn

Business Contact: (86) 83081888

APPLICANT : KONKA GROUP CO., LTD.15-24F, Konka R&D Building, No.28 Keji South 12th Road,Science and Techmology Park, Yuehai Subdistrict, NanshanDistrict, Shenzhen, Guangdong, China

DATE OF SUBMISSION : 11 Apr 2019

TEST PERIOD : 11 Apr 2019 to 7 May 2019

SAMPLE DESCRIPTION : LED TV

Model No. : UDL49MK662ANTS, HY-TVS49UH-002,LED A49UHD0819BS

Buyer: /

Trade name : KONKA, HYUNDAI, Aya

Manufacturer : /

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 2 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

1. Material List

TestItem(s) Sample Photo Item / Component

Description(s) Location(s) Style(s)

001 Black plastic Cover, LED TV -

002 White printed black plastic button label, LED TV -

003 White printed black plastic Label, LED TV -

004 Coppery metal Nut, cover, LED TV -

005 Black plastic Frame, LED TV -

006 Gray soft plastic withadhesive

Adhesive tape, frame, LEDTV -

007 Black plastic Screen frame, LED TV -

008 Black soft plastic withadhesive

Adhesive tape, screenframe, LED TV -

009 Gray soft plastic Adhesive tape, screenframe , LED TV -

010 Black plastic Holder, PCB, LED TV -

011 Gray metal Holder, LED TV -

012 Silvery metal Holder, LED TV -

013 Black plastic Holder, LED TV -

014 Black plastic Foot, LED TV -

015 Black soft plastic Pads, foot, LED TV -

016 Black coated silvery metal Screw, LED TV -

017 Silvery metal Screw, LED TV -

018 Black coated silvery metal Back, LED TV -

019 Black plastic Insulation board -

020 Gray plastic Fixed, back, LED TV -

021 Beige plastic Fixed, back, LED TV -

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 3 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

TestItem(s) Sample Photo Item / Component

Description(s) Location(s) Style(s)

022 Gray soft plastic withadhesive Patch, back, LED TV -

023 Bright black plastic withadhesive Adhesive tape -

024 Transparent plastic Fixed, back, LED TV -

025 Transparent plastic Screen protection board -

026 Camouflage plastic Screen protection board -

027 Translucent plastic Screen protection board -

028 Translucent plastic Screen protection board -

029 White plastic Screen protection board -

030 Yellow/white plastic Lamp bead, LED, back,LED TV -

031 White printed silvery metal PCB, back, LED TV -

032 Transparent plastic LED, back, LED TV -

033 Black soft plastic Pad, back, LED TV -

034 White plastic Connector, back, LED TV -

035 Rice white plastic Connector, back, LED TV -

036 Beige plastic Connector, LED wire, LEDTV -

037 Red plastic Wire jacket -

038 White plastic Wire jacket -

039 Transparent gray body Screen board -

040 Green/coppery plastic Connector, screen, board,LED TV -

041 Black plastic Patch, connector, screenboard -

042 Beige plastic Connector, PCB -

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 4 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

TestItem(s) Sample Photo Item / Component

Description(s) Location(s) Style(s)

043 Black plastic Holder, connector, PCB -

044 Silvery metal Horn, connector, PCB -

045 Blue printed white plastic Information belt -

046 Black plastic with adhesive Adhesive tape -

047 Black body SMD IC -

048 Brown body SMD capacitor -

049 Gray body SMD inductance -

050 White printed green plastic PCB -

051 Black plastic Box, speaker, LED TV -

052 Black soft plastic Ring, box, speaker, LEDTV -

053 Black plastic with adhesive Adhesive tape, box,speaker, LED TV -

054 Black plastic Ring, speaker, LED TV -

055 Black paper Paper plate -

056 Black paper Dust cap -

057 White paper card Speaker -

058 Coppery metal Wire -

059 Silvery solder Solder on paper card -

060 Silvery metal Contact plate -

061 Black metal Magnet -

062 Silvery metal Core of speaker -

063 Black glue Glue -

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 5 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

TestItem(s) Sample Photo Item / Component

Description(s) Location(s) Style(s)

064 Red plastic Wire jacket -

065 Red printed black plastic Wire jacket -

066 Black plastic Line converter -

067 White plastic Wire jacket -

068 White printed black plastic Wire jacket -

069 Blue plastic Wire jacket -

070 Blue printed black plastic Wire jacket -

071 Silvery metal Wire -

072 White plastic Connector -

073 Silvery metal Horn ,connector, speaker -

074 Black plastic Holder, AC adapter -

075 Black plastic Case, AC adapter -

076 Silvery metal AC plug -

077 Silvery metal Contact plate -

078 Transparent plastic Wire sleeve -

079 Red plastic Wire jacket -

080 Black plastic Wire jacket -

081 Silvery metal Wire -

082 White plastic Connector -

083 Silvery metal Horn, connector -

084 Black plastic Wire sleeve -

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 6 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

TestItem(s) Sample Photo Item / Component

Description(s) Location(s) Style(s)

085 Transparent plastic LED cover -

086 White plastic Connector -

087 Beige plastic Connector -

088 Silvery metal Horn, connector -

089 Gray plastic Wire jacket -

090 Pink plastic Wire jacket -

091 Silvery metal Wire -

092 Black plastic LED -

093 Transparent plastic LED -

094 Silvery metal Horn, LED, PCB, LED TV -

095 White printed green plastic PCB -

096 Black plastic Button frame, PCB, LEDTV -

097 Black plastic Button, PCB, LED TV -

098 Black plastic Holder, button, PCB, LEDTV -

099 Gray plastic Holder, button, PCB, LEDTV -

100 Silvery metal Horn, button, PCB, LEDTV -

101 Silvery metal Case, button, PCB, LEDTV -

102 Dark red plastic Wire jacket -

103 Dark gray plastic Wire jacket -

104 Silvery metal Wire -

105 White printed green plastic PCB -

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 7 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

TestItem(s) Sample Photo Item / Component

Description(s) Location(s) Style(s)

106 Silvery metal Contact plate -

107 Beige plastic Connector -

108 Silvery metal Cover, PCB -

109 Gray soft plastic Cable jacket -

110 Black plastic Wire jacket -

111 Yellow plastic Wire jacket -

112 White plastic Wire jacket -

113 Green plastic Wire jacket -

114 Red plastic Wire jacket -

115 Black plastic Wire sleeve(small) -

116 Black plastic Wire sleeve(big) -

117 Silvery metal Wire -

118 White printed green plastic PCB -

119 White plastic Connector -

120 Silvery metal Horn, connector -

121 Blue plastic Wire jacket -

122 Black plastic Wire jacket -

123 Silvery metal Wire -

124 Silvery metal Case, USB, PCB -

125 Black plastic Holder, USB, PCB -

126 Silvery metal Horn, USB, PCB -

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 8 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

TestItem(s) Sample Photo Item / Component

Description(s) Location(s) Style(s)

127 Silvery metal Case, soundtrack, PCB -

128 White plastic Ring, soundtrack, PCB -

129 Red plastic Ring, soundtrack, PCB -

130 Blue plastic Ring, soundtrack, PCB -

131 Green plastic Ring, soundtrack, PCB -

132 Black plastic Holder, soundtrack, PCB -

133 Black plastic Case, XSU06, PCB -

134 Silvery metal Horn, XSU06, PCB -

135 Black plastic Case, headset, PCB -

136 Silvery metal Contact plate -

137 Silvery metal Box, XS102, PCB -

138 Silvery metal Head, XS102, PCB -

139 Black plastic Holder, XS102, PCB -

140 Silvery metal Horn, XS102, PCB -

141 Silvery metal Case, XS103, PCB -

142 Black plastic Holder, XS103, PCB -

143 Silvery metal Horn, XS103, PCB -

144 Silvery metal Case, VGA, PCB -

145 Silvery metal Screw, VGA, PCB -

146 Silvery metal Case, HDMI, PCB -

147 Black plastic Holder, HDMI, PCB -

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 9 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

TestItem(s) Sample Photo Item / Component

Description(s) Location(s) Style(s)

148 Silvery metal Horn, HDMI, PCB -

149 Silvery metal Case, XS610, PCB -

150 Black plastic Holder, XS610, PCB -

151 Coppery metal Horn, XS610, PCB -

152 Black plastic Box, XS620, PCB -

153 Silvery metal Case, XS620, PCB -

154 Black plastic PPT sleeve, PCB -

155 Beige plastic Connector, PCB -

156 Ricer white plastic Connector, PCB -

157 White printed black plastic Electrolytic capacitorsleeve -

158 Silvery metal Electrolytic capacitor shell -

159 Black soft plastic Rubber seal -

160 Grey metal Aluminum foil -

161 Silvery metal Aluminum foil -

162 Brown paper Electrolytic paper -

163 Silvery metal Pin of electrolytic capacitor -

164 black plastic Connector, PCB -

165 Silvery metal Horn, connector, PCB -

166 Silvery metal Crystal -

167 White plastic Fixed, PCB -

168 Black body SMD IC -

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 10 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

TestItem(s) Sample Photo Item / Component

Description(s) Location(s) Style(s)

169 Black body SMD resistor -

170 Gray body Inductance -

171 Black body SMD diode -

172 Brown body SMD capacitor -

173 Silvery solder Solder, PCB -

174 White printed green plastic PCB, LED TV -

175 White printed black plastic Electrolytic capacitorsleeve -

176 Silvery metal Electrolytic capacitor shell -

177 Black soft plastic Rubber seal -

178 Grey metal Aluminum foil -

179 Silvery metal Aluminum foil -

180 Brown paper Electrolytic paper -

181 Silvery metal Pin of electrolytic capacitor -

182 Black printed yellow plastic Electrolytic capacitorsleeve -

183 Beige plastic Connector -

184 Yellow plastic withadhesive

Adhesive tape oftransformer -

185 Black plastic Frame of transformer -

186 Transparent plastic Wire jacket -

187 Coppery metal Wire -

188 Black metal Magnet -

189 Coppery metal Coil of transformer -

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 11 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

TestItem(s) Sample Photo Item / Component

Description(s) Location(s) Style(s)

190 Black plastic Holder, inductance -

191 Green core Core of inductance -

192 Black core Core of inductance -

193 Coppery metal Coil of inductance -

194 Yellow plastic Capacitor sleeve -

195 Silvery/black plastic Filler, capacitor -

196 Gray plastic Capacitor sleeve -

197 Beige plastic Housing, PCB -

198 Green body Resistor -

199 Pink body Resistor -

200 Blue body Capacitor -

201 Transparent body Glass diode -

202 Dark red body VDF902 -

203 Silvery/black body Diode -

204 Red plastic Fuse sleeve -

205 Black plastic Holder, fuse, PCB -

206 Silvery metal Horn, fuse, PCB -

207 White glue Glue -

208 Black body SMD IC -

209 Black body SMD resistor -

210 Black body SMD diode -

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 12 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

TestItem(s) Sample Photo Item / Component

Description(s) Location(s) Style(s)

211 Brown body SMD capacitor -

212 White body Cement resistance -

213 Black coated silvery metal Heat sink -

214 Silvery metal Jump wire -

215 Silvery solder Solder, PCB -

216 Yellow printed greenplastic PCB, LED TV -

217 Black plastic Case, AC plug -

218 Black plastic Holder, AC plug -

219 Silvery metal AC plug -

220 Black soft plastic Cable jacket -

221 Blue plastic Wire jacket -

222 Brown plastic Wire jacket -

223 Coppery metal Wire -

224 Black plastic Case, AC out plug -

225 Black plastic Holder, AC out plug -

226 Coppery metal Contact plate -

227 White printed black plastic Cover, remote control -

228 Black plastic Base, remote control -

229 Silvery metal Spring -

230 White printed gray softplastic Remote control button -

231 Red soft plastic Remote control button -

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 13 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

TestItem(s) Sample Photo Item / Component

Description(s) Location(s) Style(s)

232 Green soft plastic Remote control button -

233 Yellow soft plastic Remote control button -

234 Blue soft plastic Remote control button -

235 White/red soft plastic Remote control button -

236 Black plastic Battery cover -

237 Transparent plastic LED, PCB -

238 Silvery metal Horn, LED, PCB -

239 White printed black plastic Electrolytic capacitorsleeve -

240 Silvery metal Electrolytic capacitor shell -

241 Black soft plastic Rubber seal -

242 Grey metal Aluminum foil -

243 Silvery metal Aluminum foil -

244 Brown paper Electrolytic paper -

245 Silvery metal Pin of electrolytic capacitor -

246 Transparent plastic withadhesive Adhesive tape -

247 Silvery metal Button patch -

248 Black body SMD IC -

249 Silvery solder Solder, PCB, LED TV -

250 Brown/green plastic PCB, LED TV -

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 14 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

2. Test Result2.1: XRF Screening test resultsTest Method: Cadmium, Lead, Mercury, Chromium, Bromine

-With reference to IEC 62321-3-1: 2013 -XRF Screening ProcedureInstrument: Energy dispersive X-ray fluorescence spectrometer

Material No.

ppm[mg/kg]Pb Cd Hg Cr Br

Limit (mg/kg)

1000 100 1000 CrⅥ:1000 PBB: 1000PBDE: 1000

001 ND ND ND ND D(*1)002 ND ND ND ND ND003 ND ND ND ND ND004 D(*2) ND ND ND NA005 ND ND ND ND ND006 ND ND ND ND ND007 ND ND ND ND D(*1)008 ND ND ND ND ND009 ND ND ND ND ND010 ND ND ND ND D(*1)011 ND ND ND D(*3) NA012 ND ND ND D(*3) NA013 ND ND ND ND ND014 ND ND ND ND D(*1)015 ND ND ND ND ND016 ND ND ND D(*3) NA017 ND ND ND D(*3) NA018 ND ND ND ND NA019 ND ND ND ND D(*1)020 ND ND ND ND ND021 ND ND ND ND ND022 ND ND ND ND ND023 ND ND ND ND ND024 ND ND ND ND ND025 ND ND ND ND ND026 ND ND ND ND ND027 ND ND ND ND ND028 ND ND ND ND ND029 ND ND ND ND ND030 ND ND ND ND ND031 ND ND ND ND NA032 ND ND ND ND ND033 ND ND ND ND ND034 ND ND ND ND ND

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 15 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

035 ND ND ND ND ND036 ND ND ND ND ND037 ND ND ND ND ND038 ND ND ND ND ND039 ND ND ND ND ND040 ND ND ND ND ND041 ND ND ND ND ND042 ND ND ND ND ND043 ND ND ND ND ND044 ND ND ND ND NA045 ND ND ND ND D(*1)046 ND ND ND ND ND047 ND ND ND ND ND048 ND ND ND ND ND049 ND ND ND ND ND050 ND ND ND ND ND051 ND ND ND ND D(*1)052 ND ND ND ND ND053 ND ND ND ND ND054 ND ND ND ND ND055 ND ND ND ND ND056 ND ND ND ND ND057 ND ND ND ND ND058 ND ND ND ND NA059 ND ND ND ND ND060 ND ND ND ND NA061 ND ND ND ND NA062 ND ND ND ND NA063 ND ND ND ND ND064 ND ND ND ND ND065 ND ND ND ND ND066 ND ND ND ND ND067 ND ND ND ND ND068 ND ND ND ND ND069 ND ND ND ND ND070 ND ND ND ND ND071 ND ND ND ND NA072 ND ND ND ND ND073 ND ND ND ND NA074 ND ND ND ND ND075 ND ND ND ND ND076 ND ND ND ND NA077 ND ND ND ND NA078 ND ND ND ND ND079 ND ND ND ND ND080 ND ND ND ND ND

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 16 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

081 ND ND ND ND ND082 ND ND ND ND ND083 ND ND ND ND NA084 ND ND ND ND ND085 ND ND ND ND ND086 ND ND ND ND ND087 ND ND ND ND ND088 ND ND ND ND NA089 ND ND ND ND ND090 ND ND ND ND ND091 ND ND ND ND NA092 ND ND ND ND ND093 ND ND ND ND ND094 ND ND ND ND NA095 ND ND ND ND D(*1)096 ND ND ND ND ND097 ND ND ND ND ND098 ND ND ND ND ND099 ND ND ND ND ND100 ND ND ND D(*3) NA101 ND ND ND ND NA102 ND ND ND ND ND103 ND ND ND ND ND104 ND ND ND ND NA105 ND ND ND ND D(*1)106 ND ND ND ND NA107 ND ND ND ND D(*1)108 ND ND ND ND NA109 ND ND ND ND ND110 ND ND ND ND ND111 ND ND ND ND ND112 ND ND ND ND ND113 ND ND ND ND ND114 ND ND ND ND ND115 ND ND ND ND ND116 ND ND ND ND ND117 ND ND ND ND NA118 ND ND ND ND D(*1)119 ND ND ND ND ND120 ND ND ND ND NA121 ND ND ND ND ND122 ND ND ND ND ND123 ND ND ND ND NA124 ND ND ND D(*3) NA125 ND ND ND ND D(*1)126 ND ND ND ND NA

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 17 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

127 ND ND ND ND NA128 ND ND ND ND D(*1)129 ND ND ND ND D(*1)130 ND ND ND ND D(*1)131 ND ND ND ND D(*1)132 ND ND ND ND D(*1)133 ND ND ND ND D(*1)134 ND ND ND ND NA135 ND ND ND ND D(*1)136 ND ND ND ND NA137 ND ND ND ND NA138 ND ND ND D(*3) NA139 ND ND ND ND ND140 ND ND ND ND NA141 ND ND ND D(*3) NA142 ND ND ND ND ND143 ND ND ND ND NA144 ND ND ND ND NA145 ND ND ND ND NA146 ND ND ND ND NA147 ND ND ND ND ND148 ND ND ND ND NA149 ND ND ND ND NA150 ND ND ND ND ND151 ND ND ND ND NA152 ND ND ND ND D(*1)153 ND ND ND ND NA154 ND ND ND ND ND155 ND ND ND ND D(*1)156 ND ND ND ND ND157 ND ND ND ND ND158 ND ND ND ND NA159 ND ND ND ND ND160 ND ND ND ND NA161 ND ND ND ND NA162 ND ND ND ND ND163 ND ND ND ND NA164 ND ND ND ND D(*1)165 ND ND ND ND NA166 ND ND ND ND NA167 ND ND ND ND ND168 ND ND ND ND ND169 ND ND ND ND ND170 ND ND ND ND ND171 ND ND ND ND ND172 ND ND ND ND ND

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 18 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

173 ND ND ND ND NA174 ND ND ND ND D(*1)175 ND ND ND ND ND176 ND ND ND ND NA177 ND ND ND ND ND178 ND ND ND ND NA179 ND ND ND ND NA180 ND ND ND ND ND181 ND ND ND ND NA182 ND ND ND ND ND183 ND ND ND ND D(*1)184 ND ND ND ND ND185 ND ND ND ND ND186 ND ND ND ND ND187 ND ND ND ND NA188 ND ND ND ND NA189 ND ND ND ND NA190 ND ND ND ND ND191 ND ND ND ND ND192 ND ND ND ND ND193 ND ND ND ND NA194 ND ND ND ND D(*1)195 ND ND ND ND ND196 ND ND ND ND D(*1)197 ND ND ND ND D(*1)198 ND ND ND ND ND199 ND ND ND ND ND200 ND ND ND ND ND201 ND ND ND ND ND202 ND ND ND ND ND203 ND ND ND ND ND204 ND ND ND ND ND205 ND ND ND ND ND206 ND ND ND ND NA207 ND ND ND ND ND208 ND ND ND ND ND209 ND ND ND ND ND210 ND ND ND ND ND211 ND ND ND ND ND212 ND ND ND ND ND213 ND ND ND ND NA214 ND ND ND ND NA215 ND ND ND ND NA216 ND ND ND ND D(*1)217 ND ND ND ND ND218 ND ND ND ND D(*1)

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 19 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

219 D(*2) ND ND ND NA220 ND ND ND ND ND221 ND ND ND ND ND222 ND ND ND ND ND223 ND ND ND ND NA224 ND ND ND ND ND225 ND ND ND ND D(*1)226 ND ND ND ND NA227 ND ND ND ND ND228 ND ND ND ND D(*1)229 ND ND ND ND NA230 ND ND ND ND ND231 ND ND ND ND ND232 ND ND ND ND ND233 ND ND ND ND ND234 ND ND ND ND ND235 ND ND ND ND ND236 ND ND ND ND D(*1)237 ND ND ND ND D(*1)238 ND ND ND ND NA239 ND ND ND ND ND240 ND ND ND ND NA241 ND ND ND ND ND242 ND ND ND ND NA243 ND ND ND ND NA244 ND ND ND ND ND245 ND ND ND ND NA246 ND ND ND ND ND247 ND ND ND D(*3) NA248 ND ND ND ND ND249 ND ND ND ND NA250 ND ND ND ND ND

Remark:-mg/kg is equal to ppm (parts per million)(*1) The screening result was found in the inconclusive region, thus the further wet chemistry tests aresuggested.(*2) The screening result was found above the limit, thus the further wet chemistry tests are suggested.(*3) The chromium screening result was found in the inconclusive region, thus the further wet chemistrytests are suggested.

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 20 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

Guidelines: XRF Screening limits for different matrices

MaterialsConcentration (ppm)

Cd Cr Pb Hg Br

Metallic BL≤70＜X≤130＜OL BL≤700＜OL BL≤700＜

X≤1300＜OLBL≤700＜

X≤1300＜OL NA

Polymeric BL≤70＜X≤130＜OL BL≤700＜OL BL≤700＜

X≤1300＜OLBL≤700＜

X≤1300＜OL BL≤200＜X

ElectronicCompone

ntsDL＜X≤150＜OL BL≤500＜OL BL≤700＜

X≤1300＜OLBL≤500＜

X≤1500＜OL BL≤200＜X

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 21 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

2.2: Confirmation Test ResultsTest Methods: for total Lead, Cadmium, Mercury

-Ref. to IEC 62321-4: 2013 & IEC 62321-5: 2013, analysis was performed by ICP-AES or AAS.For Hexavalent Chromium

-Ref. to IEC 62321-7-1: 2015, nalysis was performed by Spot-test and water-boiling procedure.(Metal)-Ref. to IEC 62321-7-2: 2017, analysis was performed by UV/VIS(Polymeric and electronics).-Ref. to International Standard ISO 17075: 2007(Leather and other materials).

For PBBs, PBDEs-Ref. to IEC 62321-6: 2015, analysis was performed by GC-MS.

Pb Cd Hg Cr(Ⅵ) PBBs PBDEs

Limitppm(mg/kg)

1000 100 1000 1000 1000 1000

MaterialNo.

ppm(mg/kg)Pb Cd Hg Cr(Ⅵ) PBBs PBDEs

001 - - - - ND ND004 37000(*1) - - - - -007 - - - - ND ND010 - - - - ND ND011 - - - Negative - -012 - - - Negative - -014 - - - - ND ND016 - - - Negative - -017 - - - Negative - -019 - - - - ND ND045 - - - - ND ND051 - - - - ND ND095 - - - - ND ND100 - - - Negative - -105 - - - - ND ND107 - - - - ND ND118 - - - - ND ND124 - - - Negative - -125 - - - - ND ND128 - - - - ND ND129 - - - - ND ND130 - - - - ND ND131 - - - - ND ND132 - - - - ND ND133 - - - - ND ND135 - - - - ND ND138 - - - Negative - -141 - - - Negative - -

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 22 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

152 - - - - ND ND155 - - - - ND ND164 - - - - ND ND174 - - - - ND ND183 - - - - ND ND194 - - - - ND ND196 - - - - ND ND197 - - - - ND ND216 - - - - ND ND218 - - - - ND ND219 12000(*1) - - - - -225 - - - - ND ND228 - - - - ND ND236 - - - - ND ND237 - - - - ND ND247 - - - Negative - -

Remark:(*1) According to Annex of 2011/65/EU, Lead as an alloying element in copper alloy containing up to 4 %lead by weight should be exempted.

Note / Key:ND = Not Detected “D” = detected “BL” = below Limit“X” = Inconclusive Range “DL” = Detection Limit “OL” = over LimitNA = Not Applicable 10000 mg/kg = 1 %mg/kg = milligram(s) per kilogram = ppm = part(s) per millionDetection Limit : See Appendix.

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 23 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

2.3: Detection Limit

List of Analytes Detection Limit and Maximum Allowable Limit [ Compliance Test for European Council Directive2011/65/EU ] :

No. Name of Analytes

Detection Limit (mg/kg)

MaximumAllowable Limit

(mg/kg)

X-ray fluorescence (XRF)[a]

WetChemistryPlastic

Metallic /glass /ceramic

Others

1 Lead (Pb) 100 200 200 10 10002 Cadmium (Cd) 50 50 50 10 1003 Mercury (Hg) 100 200 200 10 10004 Chromium (Cr) 100 200 200 NA NA5 Chromium VI (Cr VI) NA NA NA 10 /See [a, b] 1000 / Negative[b]

6 Bromine (Br) 200 NA 200 NA NA

7

Polybromobiphenyls (PBBs)- Bromobiphenyl (MonoBB)- Dibromobiphenyl (DiBB)- Tribromobiphenyl (TriBB)- Tetrabromobiphenyl (TetraBB)- Pentabromobiphenyl (PentaBB)- Hexabromobiphenyl (HexaBB)- Heptabromobiphenyl (HeptaBB)- Octabromobiphenyl (OctaBB)- Nonabromobiphenyl (NonaBB)- Decabromobiphenyl (DecaBB)

NA NA NA Each 50 Sum 1000

8

Polybromodiphenyl ethers (PBDEs)- Bromodiphenyl ether (MonoBDE)- Dibromodiphenyl ether (DiBDE)- Tribromodiphenyl ether (TriBDE)- Tetrabromodiphenyl ether (TetraBDE)- Pentabromodiphenyl ether (PentaBDE)- Hexabromodiphenyl ether (HexaBDE)- Heptabromodiphenyl ether (HeptaBDE)- Octabromodiphenyl ether (OctaBDE)- Nonabromodiphenyl ether (NonaBDE)- Decabromodiphenyl ether (DecaBDE)

NA NA NA Each 50 Sum 1000

[a]The principle of this method was evaluated and supported by two studies organized by IEC TC 111 WG3. These studieswere focused on detecting the presence of Cr VI in the corrosion protection coatings on metallic samples.

[b]

Result(s) of Cr VI for metallic material(s) was (were) expressed in term of positive and negative. Negative means theabsence of Cr VI on the tested areas and the result(s) was (were) regarded as in compliance with European Parliament andCouncil Directive 2011/65/EU, Article 4(1). While, positive means the presence of Cr VI on tested areas and the result(s)was (were) regarded as in conflict with European Parliament and Council Directive 2011/65/EU, Article 4(1).

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 24 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

BBP/DBP/DEHP/DIBP Content – European Council Directive 2011/65/EU on the Restriction of theUse of Certain Hazardous Substances in Electrical and Electronic Equipment (RoHS) with itsAmendments up to EU No. 2015/ 863 Annex II

Test Methods:With reference to International Standard IEC 62321-8, Sample was extracted with organic solvent and thenanalyzed by Gas Chromatograph Mass Spectrometer.

Test Item(s) Item / Component Description(s) Location(s) Style(s)

001 Black plastic Cover, LED TV -

002 White printed black plastic button label, LED TV -

003 White printed black plastic Label, LED TV -

005 Black plastic Frame, LED TV -

006 Gray soft plastic with adhesive Adhesive tape, frame, LEDTV -

007 Black plastic Screen frame, LED TV -

008 Black soft plastic with adhesive Adhesive tape, screenframe, LED TV -

009 Gray soft plastic Adhesive tape, screenframe , LED TV -

010 Black plastic Holder, PCB, LED TV -

013 Black plastic Holder, LED TV -

014 Black plastic Foot, LED TV -

015 Black soft plastic Pads, foot, LED TV -

019 Black plastic Insulation board -

020 Gray plastic Fixed, back, LED TV -

021 Beige plastic Fixed, back, LED TV -

022 Gray soft plastic with adhesive Patch, back, LED TV -

023 Bright black plastic with adhesive Adhesive tape -

024 Transparent plastic Fixed, back, LED TV -

025 Transparent plastic Screen protection board -

026 Camouflage plastic Screen protection board -

027 Translucent plastic Screen protection board

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 25 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

028 Translucent plastic Screen protection board

029 White plastic Screen protection board

030 Yellow/white plastic Lamp bead, LED, back,LED TV

032 Transparent plastic LED, back, LED TV

033 Black soft plastic Pad, back, LED TV

034 White plastic Connector, back, LED TV

035 Rice white plastic Connector, back, LED TV

036 Beige plastic Connector, LED wire, LEDTV

037 Red plastic Wire jacket

038 White plastic Wire jacket

040 Green/coppery plastic Connector, screen, board,LED TV

041 Black plastic Patch, connector, screenboard

042 Beige plastic Connector, PCB

043 Black plastic Holder, connector, PCB

045 Blue printed white plastic Information belt

046 Black plastic with adhesive Adhesive tape

050 White printed green plastic PCB

051 Black plastic Box, speaker, LED TV

052 Black soft plastic Ring, box, speaker, LEDTV

053 Black plastic with adhesive Adhesive tape, box,speaker, LED TV

054 Black plastic Ring, speaker, LED TV

063 Black glue Glue

064 Red plastic Wire jacket

065 Red printed black plastic Wire jacket

066 Black plastic Line converter

067 White plastic Wire jacket

068 White printed black plastic Wire jacket

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 26 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

069 Blue plastic Wire jacket

070 Blue printed black plastic Wire jacket

072 White plastic Connector

074 Black plastic Holder, AC adapter

075 Black plastic Case, AC adapter

078 Transparent plastic Wire sleeve

079 Red plastic Wire jacket

080 Black plastic Wire jacket

082 White plastic Connector

084 Black plastic Wire sleeve

085 Transparent plastic LED cover

086 White plastic Connector

087 Beige plastic Connector

089 Gray plastic Wire jacket

090 Pink plastic Wire jacket

092 Black plastic LED

093 Transparent plastic LED

095 White printed green plastic PCB

096 Black plastic Button frame, PCB, LEDTV

097 Black plastic Button, PCB, LED TV

098 Black plastic Holder, button, PCB, LEDTV

099 Gray plastic Holder, button, PCB, LEDTV

102 Dark red plastic Wire jacket

103 Dark gray plastic Wire jacket

105 White printed green plastic PCB

107 Beige plastic Connector

109 Gray soft plastic Cable jacket

110 Black plastic Wire jacket

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 27 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

111 Yellow plastic Wire jacket

112 White plastic Wire jacket

113 Green plastic Wire jacket

114 Red plastic Wire jacket

115 Black plastic Wire sleeve(small)

116 Black plastic Wire sleeve(big)

118 White printed green plastic PCB

119 White plastic Connector

121 Blue plastic Wire jacket

122 Black plastic Wire jacket

125 Black plastic Holder, USB, PCB

128 White plastic Ring, soundtrack, PCB

129 Red plastic Ring, soundtrack, PCB

130 Blue plastic Ring, soundtrack, PCB

131 Green plastic Ring, soundtrack, PCB

132 Black plastic Holder, soundtrack, PCB

133 Black plastic Case, XSU06, PCB

135 Black plastic Case, headset, PCB

139 Black plastic Holder, XS102, PCB

142 Black plastic Holder, XS103, PCB

147 Black plastic Holder, HDMI, PCB

150 Black plastic Holder, XS610, PCB

152 Black plastic Box, XS620, PCB

154 Black plastic PPT sleeve, PCB

155 Beige plastic Connector, PCB

156 Ricer white plastic Connector, PCB

157 White printed black plastic Electrolytic capacitor sleeve

159 Black soft plastic Rubber seal

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 28 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

164 black plastic Connector, PCB

167 White plastic Fixed, PCB

174 White printed green plastic PCB, LED TV

175 White printed black plastic Electrolytic capacitor sleeve

177 Black soft plastic Rubber seal

182 Black printed yellow plastic Electrolytic capacitor sleeve

183 Beige plastic Connector

184 Yellow plastic with adhesive Adhesive tape oftransformer

185 Black plastic Frame of transformer

186 Transparent plastic Wire jacket

190 Black plastic Holder, inductance

194 Yellow plastic Capacitor sleeve

195 Silvery/black plastic Filler, capacitor

196 Gray plastic Capacitor sleeve

197 Beige plastic Housing, PCB

204 Red plastic Fuse sleeve

205 Black plastic Holder, fuse, PCB

207 White glue Glue

216 Yellow printed green plastic PCB, LED TV

217 Black plastic Case, AC plug

218 Black plastic Holder, AC plug

220 Black soft plastic Cable jacket

221 Blue plastic Wire jacket

222 Brown plastic Wire jacket

224 Black plastic Case, AC out plug

225 Black plastic Holder, AC out plug

227 White printed black plastic Cover, remote control

228 Black plastic Base, remote control

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 29 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

230 White printed gray soft plastic Remote control button

231 Red soft plastic Remote control button

232 Green soft plastic Remote control button

233 Yellow soft plastic Remote control button

234 Blue soft plastic Remote control button

235 White/red soft plastic Remote control button

236 Black plastic Battery cover

237 Transparent plastic LED, PCB

239 White printed black plastic Electrolytic capacitor sleeve

241 Black soft plastic Rubber seal

246 Transparent plastic with adhesive Adhesive tape

250 Brown/green plastic PCB, LED TV

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 30 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

Test Parameter: BBP DBP DEHP DiBP -

Limit (%): 0.1 0.1 0.1 0.1 -

Test Item(s) Result (%) Conclusion

001 ND ND ND ND PASS

002 ND ND ND ND PASS

003 ND ND ND ND PASS

005 ND ND ND ND PASS

006 ND ND ND ND PASS

007 ND ND ND ND PASS

008 ND ND ND ND PASS

009 ND ND ND ND PASS

010 ND ND ND ND PASS

013 ND ND ND ND PASS

014 ND ND ND ND PASS

015 ND ND ND ND PASS

019 ND ND ND ND PASS

020 ND ND ND ND PASS

021 ND ND ND ND PASS

022 ND ND ND ND PASS

023 ND ND ND ND PASS

024 ND ND ND ND PASS

025 ND ND ND ND PASS

026 ND ND ND ND PASS

027 ND ND ND ND PASS

028 ND ND ND ND PASS

029 ND ND ND ND PASS

030 ND ND ND ND PASS

032 ND ND ND ND PASS

033 ND ND ND ND PASS

034 ND ND ND ND PASS

035 ND ND ND ND PASS

036 ND ND ND ND PASS

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 31 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

Test Parameter: BBP DBP DEHP DiBP -

Limit (%): 0.1 0.1 0.1 0.1 -

Test Item(s) Result (%) Conclusion

037 ND ND ND ND PASS

038 ND ND ND ND PASS

040 ND ND ND ND PASS

041 ND ND ND ND PASS

042 ND ND ND ND PASS

043 ND ND ND ND PASS

045 ND ND ND ND PASS

046 ND ND ND ND PASS

050 ND ND ND ND PASS

051 ND ND ND ND PASS

052 ND ND ND ND PASS

053 ND ND ND ND PASS

054 ND ND ND ND PASS

063 ND ND ND ND PASS

064 ND ND ND ND PASS

065 ND ND ND ND PASS

066 ND ND ND ND PASS

067 ND ND ND ND PASS

068 ND ND ND ND PASS

069 ND ND ND ND PASS

070 ND ND ND ND PASS

072 ND ND ND ND PASS

074 ND ND ND ND PASS

075 ND ND ND ND PASS

078 ND ND ND ND PASS

079 ND ND ND ND PASS

080 ND ND ND ND PASS

082 ND ND ND ND PASS

084 ND ND ND ND PASS

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 32 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

Test Parameter: BBP DBP DEHP DiBP -

Limit (%): 0.1 0.1 0.1 0.1 -

Test Item(s) Result (%) Conclusion

085 ND ND ND ND PASS

086 ND ND ND ND PASS

087 ND ND ND ND PASS

089 ND ND ND ND PASS

090 ND ND ND ND PASS

092 ND ND ND ND PASS

093 ND ND ND ND PASS

095 ND ND ND ND PASS

096 ND ND ND ND PASS

097 ND ND ND ND PASS

098 ND ND ND ND PASS

099 ND ND ND ND PASS

102 ND ND ND ND PASS

103 ND ND ND ND PASS

105 ND ND ND ND PASS

107 ND ND ND ND PASS

109 ND ND ND ND PASS

110 ND ND ND ND PASS

111 ND ND ND ND PASS

112 ND ND ND ND PASS

113 ND ND ND ND PASS

114 ND ND ND ND PASS

115 ND ND ND ND PASS

116 ND ND ND ND PASS

118 ND ND ND ND PASS

119 ND ND ND ND PASS

121 ND ND ND ND PASS

122 ND ND ND ND PASS

125 ND ND ND ND PASS

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 33 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

Test Parameter: BBP DBP DEHP DiBP -

Limit (%): 0.1 0.1 0.1 0.1 -

Test Item(s) Result (%) Conclusion

128 ND ND ND ND PASS

129 ND ND ND ND PASS

130 ND ND ND ND PASS

131 ND ND ND ND PASS

132 ND ND ND ND PASS

133 ND ND ND ND PASS

135 ND ND ND ND PASS

139 ND ND ND ND PASS

142 ND ND ND ND PASS

147 ND ND ND ND PASS

150 ND ND ND ND PASS

152 ND ND ND ND PASS

154 ND ND ND ND PASS

155 ND ND ND ND PASS

156 ND ND ND ND PASS

157 ND ND ND ND PASS

159 ND ND ND ND PASS

164 ND ND ND ND PASS

167 ND ND ND ND PASS

174 ND ND ND ND PASS

175 ND ND ND ND PASS

177 ND ND ND ND PASS

182 ND ND ND ND PASS

183 ND ND ND ND PASS

184 ND ND ND ND PASS

185 ND ND ND ND PASS

186 ND ND ND ND PASS

190 ND ND ND ND PASS

194 ND ND ND ND PASS

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 34 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

Test Parameter: BBP DBP DEHP DiBP -

Limit (%): 0.1 0.1 0.1 0.1 -

Test Item(s) Result (%) Conclusion

195 ND ND ND ND PASS

196 ND ND ND ND PASS

197 ND ND ND ND PASS

204 ND ND ND ND PASS

205 ND ND ND ND PASS

207 ND ND ND ND PASS

216 ND ND ND ND PASS

217 ND ND ND ND PASS

218 ND ND ND ND PASS

220 ND ND ND ND PASS

221 ND ND ND ND PASS

222 ND ND ND ND PASS

224 ND ND ND ND PASS

225 ND ND ND ND PASS

227 ND ND ND ND PASS

228 ND ND ND ND PASS

230 ND ND ND ND PASS

231 ND ND ND ND PASS

232 ND ND ND ND PASS

233 ND ND ND ND PASS

234 ND ND ND ND PASS

235 ND ND ND ND PASS

236 ND ND ND ND PASS

237 ND ND ND ND PASS

239 ND ND ND ND PASS

241 ND ND ND ND PASS

246 ND ND ND ND PASS

250 ND ND ND ND PASS

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 35 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

Note / key:

BBP = Butyl benzyl phthalate (CAS No: 85-68-7) DBP = Dibutyl phthalate (CAS No: 84-74-2)

DEHP = Di(2-ethylhexyl) phthalate (CAS No:117-81-7)

DiBP = Diisobutyl phthalate (CAS No:84-69-5)

ND = Not detected % = percent 10000 mg/kg = 1 %mg/kg = milligram(s) per kilogramDetection Limit (%) : Each 0.005

Remark:- The amendment will be effective on 22 July 2019. For medical devices and control

instruments, effective date will be 22 July 2021.

Test Report

This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf or available on request and accessible at www.gdest.cn. Attention is drawn to the limitations of liability, indemnification andjurisdictional issues defined therein. Unless otherwise stated the results shown in the test report refer only to the sample(s) tested. This test report cannot be reproduced, except in full, without prior written permission of the Company. Anyunauthorized alteration, forery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law.

Report No. ESTC-190411009Date: 7 May 2019Page 36 of 36

EST Technology Co., Ltd.Santun, Houjie, Dongguan, Guangdong, China

2. Photo of the Submitted Sample

EST Technology authenticate the photo on original report only*** End of Report ***