Testing Capability & Price List - Standard Group · Regular Service : 4 Working Days - Regular...
Transcript of Testing Capability & Price List - Standard Group · Regular Service : 4 Working Days - Regular...
Testing Capability & Price List
IMPORTANT INFORMATION FOR CUSTOMER
1.
Testing Services Available (Time excluding sample s pickup and report hard copy delivery):
Regular Service : 4 Working Days - Regular Price Express Service : 3 Working Day - 30% Surcharge Emergency Service : 2 Working Day - 60% Surcharge Shuttle Service : 1 Working Day - 100% Surcharge
Express, Emergency & Shuttle Service depend s on the capability and limited for some selected test properties. Please contact laboratory before submission.
2. A working day normally commences at 9 a. m. Test requisitions received after 2 p.m. will be entertained as submission s of the following day.
Laboratory is open 7 days a week except Public Holidays.
3. Where the lab test request covering several tests requiring different speeds of service, the final test report will not be issued until all tests are comple ted. However, verbal test result for the completed test can be given upon request.
4. Standards, requirements and regulations of the destined countries will be the basis for our testing and analysis.
5. There is a minimum charge of US$10 per report issued.
6. Tested samples will be retained for a working period of 6 months only.
7. Quantity discount is available on contract basis, subject to agreed minimum volume.
8. To ‘Stop’ or ‘Hold’ any request, applicant need to inform laboratory by written communication within 1 st working day.
9. In case of Subcontracted test properties (LabTEX services need to send some other laboratory), service turn around ti me will be 7-10 days.
10. All prices mentioned in this book exclusive of VAT
11. Payment for the requested test items should be cleared before delivery of the report.
12. Report courier inside Bangladesh is free of cost.
13. labTEX services preserves the righ t to change the conditions and testing fees without prior notice.
14. General Sample Requirement: Fabric : 2 Square yards / Sample and Garments : 2 garments / Sample
PLEASE CONTACT WITH US FOR YOUR INQUIRY
Name Designation Mobile Number E-mail
Mr. Mir Tofazzal Hossain Manager – Laboratory +88-0171-2186844 [email protected]
Mr. Shuvasish Barua Asst. Manager – Laboratory +88-0183-0062764 [email protected]
Page 1 of 7 Update: 09-03-2010
Corporate member MemberOrganizational Member Corporate member
labTEX Services, CET, Industrial Plot # 1, Block-E, Avenue-1 (Kalshi), Mirpur-11, Dhaka-1216, Phone: 880-2-8010120, 8057052, Ext.: 5198, 5199, Dir: 805 1271 Fax: +880-2-9000244, E-mail: [email protected], web: www.labtex.com.bd
ISO 17025 Certified by NABL
+88-0192-2785614 [email protected] Syed Bulbul Ahmed BD Officer
Testing Capability & Price List
A. DIMENSIONAL STABILITY (SHRINKAGE) & RELATED TEST Srl.#
Test Properties Test Method US/Canada
Test Method EU/Others
Price (US$)
1. gnihsaW ot ytilibatS lanoisnemiD a. Fabric Shrinkage (i) 1 Wash AATCC 135 BS EN 25077
BS EN ISO 6330 ISO5077
15 82 “ sehsaW 3 )ii( 04 “ sehsaW 5 )iii(
b. Garment Shrinkage (i) 1 Wash AATCC 150 BSEN 25077
BS EN ISO 6330 ISO5077
17 13 “ sehsaW 3 )ii( 44 “ sehsaW 5 )iii(
2. hsaw dnaH lautcA ot ytilibatS lanoisnemiD
51 hsaw 1 )i( cirbaF .a 82 hsaw 3 )ii( 71 hsaw 1 )i( tnemraG .b 13 hsaw 3 )ii( 6 elcyC hsaW lanoitiddA hcaE
3. Dimensional Stability to Commercial Dry-cleaning i) Fabric Commercial Process 22 ii) Garment Commercial Process 24
51 elcyC gninaelc yrD lanoitiddA hcaE
4. Dimensional Stability to Steam (Wira) – Fabric BS4323: 1979 ISO 3005 : 1978
15 - Garment 17
5. Dimensional Stability to Steam Ironing By Domestic Iron/Industrial Steam Iron 13
6. Appearance After Laundering Fabric - 1 Wash 20 With CF to Actual Laundering - 3 Wash 33
Garment- 1 Wash 22 63 hsaW 3 -
7. Appearance After Hand wash Fabric - 1 Hand washing 20
- 3 Hand washing 33 Garment - 1 Hand washing 22
63 gnihsaw dnaH 3 -
8. Appearance After 1 Commercial Dry cleaning - (i) Fabric 27 (ii) Garment 29
9. Dimensional Stability to Washing + Appearance- Fabric -1 Wash AATCC 135 BS EN 25077
BS EN 26330 ISO 5077 ISO 6330
20 33 “ hsaW 3 22 051 CCTAA hsaW 1-tnemraG - 63 “ hsaW 3-
10. Appearance after crease resistance Fabric - 1 Wash AATCC 88C ISO 7769 : 2006 20
- 3 Wash “ - 33 22 6002 : 9677 OSI 341 CCTAA hsaW 1 -stnemraG 63 - “ hsaW 3 -
Page 2 of 7 Update: 09-03-2010
Corporate member MemberOrganizational Member Corporate member
labTEX Services, CET, Industrial Plot # 1, Block-E, Avenue-1 (Kalshi), Mirpur-11, Dhaka-1216, Phone: 880-2-8010120, 8057052, Ext.: 5198, 5199, Dir: 805 1271 Fax: +880-2-9000244, E-mail: [email protected], web: www.labtex.com.bd
ISO 17025 Certified by NABL
Testing Capability & Price List
Srl.#
Test Properties Test Method US/Canada
Test Method EU/Others
Price (US$)
11. 7 gninorI tnemraG hcaE
12. Appearance after Steam Pressing Iron By Domestic Iron/Industrial Steam Iron 13
13. Dimensional Stability to Steam Press (Commercial Process) (i) Fabric 15
(ii) Garment 17
14. Spirality (Distortion) - Degree & % Method a. After 1 Wash AATCC 179 Related Measuring Scale
20 23 hsaW 3 retfA .b
15. Smoothness of Fabric / Seams AATCC 124, 88B 25
Page 3 of 7 Update: 09-03-2010
Corporate member MemberOrganizational Member Corporate member
labTEX Services, CET, Industrial Plot # 1, Block-E, Avenue-1 (Kalshi), Mirpur-11, Dhaka-1216, Phone: 880-2-8010120, 8057052, Ext.: 5198, 5199, Dir: 805 1271 Fax: +880-2-9000244, E-mail: [email protected], web: www.labtex.com.bd
ISO 17025 Certified by NABL
Testing Capability & Price List
B. COLOURFASTNESS TEST Srl.#
Test Properties Test Method US/Canada
Test Method EU/Others
Price (US$)
16. Washing - a) Washing Temperature: 30°C/85°F - 60°C/ 140°F
AATCC 61 No. 1A, 2A
ISO 105-C10 : 2006 ISO 105 C06 : 1994 Test A-C/ISO 105 C05/BS 1006 C01-
C03, CAN/CGSB-4.2 No. 19.1
10 21 F°041 / C°06 revO :erutarepmeT gnihsaW )b
17. 21 01C-501 OSI adoS dna paoS ro paoS htiw gnihsaW
18. Rubbing / Crocking - (i) Original
AATCC 8/116 BS EN ISO
105 X12 :2002 , CAN/CGSB-4.2
No. 22
9 61 hsaW 1 dna lanigirO )ii(
19. 51 CCTAA noitaripsreP ISO 105 E04/BS
1006 E04/DIN 54020
15
20. 51 06135 NID avilaS
21. Saliva and Perspiration 35 LMBG & 8210.1 25
22. Water (Static Wetting)
- With Self-staining AATCC 107 ISO 105 E01
BS 1006 E01 10
23. -501 OSI NE SB 261 CCTAA retaW )looP( detanirolhC
E03 : 1997 15
24. / 20E 501 OSI 601 CCTAA retaW aeS
BS 1006 E02 10
25. 7OE 501 OSI 401 CCTAA gnittopS retaW
BS 1606 E07 8
26. dohteM esuoH-nI hcaelB enirolhC 10
27. dohteM esuoH-nI hcaelB enirolhC noN 10
28. Dry cleaning (with assessment on staining of solution) AATCC 132 ISO 105 D01: 1993 BS EN ISO 105-D01
13
29. 7 gninorI dnaH
30. esuoH-nI gniwolleY cilonehP
Method ISO 105 –X18 22
31. 71 dohteM esuoH-nI ytilibaruD tnirP
32. 51 )srh 84( 361 CCTAA refsnarT eyD 33. Ozone 1st Cycle
AATCC 109 ISO 105G03, BSEN ISO105G03
25 2nd 51 elcyC
Page 4 of 7 Update: 09-03-2010
Corporate member MemberOrganizational Member Corporate member
labTEX Services, CET, Industrial Plot # 1, Block-E, Avenue-1 (Kalshi), Mirpur-11, Dhaka-1216, Phone: 880-2-8010120, 8057052, Ext.: 5198, 5199, Dir: 805 1271 Fax: +880-2-9000244, E-mail: [email protected], web: www.labtex.com.bd
ISO 17025 Certified by NABL
Testing Capability & Price List
C. FABRIC/GARMENT PERFORMANCE TESTSrl.#
Test Properties Test Method US/Canada
Test Method EU/Others
Price (US$)
34. Tensile Strength (i) Grab Method ASTM D5034 BS EN ISO 13934-2 15 (ii) Strip Method ASTM D5035 BS EN ISO 13934-1 15
35. Tear Strength a. Elmendorf Method ASTM D1424 EN ISO 13937-1 15
1622D MTSA dohteM eugnoT .b BS EN ISO 13937-2 BS EN ISO 13937-4 BS EN ISO 13937-3
15
36. 3861D MTSA )maeS reP( htgnertS maeS BS EN ISO 13936-1
/ISO 13935-2 12
37. Peel Bond Strength/ Bonding Strength of Laminated
Fabrics ASTM D 2724 AATCC 136
BS EN ISO 11339:2005/BS
5350 Part C12/JIS L 1089
12
38. 3861D MTSA )maeS reP( ytilibahctertS maeS
(Mod) BS 3320 (Mod) 12
39. Garment Seam Strength (per garment)- Upto 3 to 6 Seam 18
73 revO & maeS 9 otpU -
40. 434D MTSA egappilS maeS BS EN ISO 13936-1 , 2 & 3 : 2004
15
41. 51 5991 : 2602 OSI 6522D MTSA htgnertS daerhT elgniS
42. 51 9891:2-2391 sB 6522D MTSA htgnertS pooL
43. Abrasion Resistance (Martindale) - First 10000 rubs ASTM D 4966 ISO 12947-1,2,3 15
5 sbur 00001 fo trap ro rehto yrevE
44. 2-54921 OSI 0794D MTSA )eladnitraM( ecnatsiseR gnilliP SN 198525
17
45. ,1185SB sruoH 5 otpU – )ICI( ecnatsiseR gnilliP BSEN ISO 12945-1
17 52 srh 01 tneuqesbuS -
46. Water Repellency - (Spray Test) a. As Received AATCC 22 ISO 4920 15
33 gnihsaW 3 retfA & erofeB .b 13 gninaelC yrD 1 retfA & erofeB .c
47. 18 CCTAA detcartxE retaW fo Hp ISO 3071/
EN 1413 (With KCL)18
48. 51 62 CCTAA tseT gniegA
49. Stretch & Recovery / Stretch Properties ASTM D2594 (Knit)
ASTM D3107(Woven)BS EN 14704-1 20
Page 5 of 7 Update: 09-03-2010
Corporate member MemberOrganizational Member Corporate member
labTEX Services, CET, Industrial Plot # 1, Block-E, Avenue-1 (Kalshi), Mirpur-11, Dhaka-1216, Phone: 880-2-8010120, 8057052, Ext.: 5198, 5199, Dir: 805 1271 Fax: +880-2-9000244, E-mail: [email protected], web: www.labtex.com.bd
ISO 17025 Certified by NABL
Testing Capability & Price List
D. FABRIC CONSTRUCTION ANALYSIS Srl.#
Test Properties Test Method US/Canada
Test Method EU/Others
Price (US$)
50. Woven Fabric count (Threads per Unit Length) ASTM D3775 ISO 7211/2 BS EN 1049-2:1994
12
51. 51 8891:1445 SB 7883D MTSA )ytisneD hctitS( tnuoc cirbaF tinK
52. Yarn Size / Yarn Count - Woven or Knit (per yarn) ASTM D1059,
D1907 ISO 7211/5 BS 2865
12
53. Fabric Type / Type of Weave a. Simple Structure 10
54. 4773D MTSA htdiW cirbaF
ASTM D3887 Sec 10
ISO 3932 7
55. 6773D MTSA aera tinu reP - thgieW cirbaF BS 2471, ISO 3801 12
56. Skew or Bow a. After 1 Wash ASTM D3882 20
b. After 3 Wash 32 E. GARMENT ACCESSORIES TEST Srl.#
Test Properties Test Method US/Canada
Test Method EU/Others
Price (US$)
57. 01 6002 : 4803 SB 1602D MTSA )noitces rep( htgnertS reppiZ Zipper Strength (Full package excluding reciprocating test) ASTM D2061 50
58. Strength of Velcro Tape Sheer & Peeling 12
59. Impact Resistance of Buttons (for 10 pieces) i) For 10 Pieces ASTM D5171 BS 4162 : 1983 15 Each additional 10 Pieces 10
60. Button Strength Per max. 5 sets of same type In-House Method 12
5 htgnertS panS 5 lanoitidda hcaE
61. Button Tension Test Per max. 5 sets of same type 16 CFR Part 1500 51-53 Part F 12 Each additional 5 Snap Strength 5
62. Snap Tension Test Per max. 5 sets of same type 16 CFR Part 1500 51-53 12
Each additional 5 Snap Strength 5
63. Snap Torque Test Per max. 5 sets of same type 16 CFR Part 1500 51-53 12 Each additional 5 Snap Strength 5
64. Snap Attachment Strength Per max. 5 sets of same type ASTM 4846 /
SAFQ 12
Each additional 5 Snap Strength 5
65. Snap/Unsnapping Force - per max. 5 sets of same type ASTM 4846 / SAFQ
12 Each Additional 5 Snap Strength 5
Page 6 of 7 Update: 09-03-2010
Corporate member MemberOrganizational Member Corporate member
labTEX Services, CET, Industrial Plot # 1, Block-E, Avenue-1 (Kalshi), Mirpur-11, Dhaka-1216, Phone: 880-2-8010120, 8057052, Ext.: 5198, 5199, Dir: 805 1271 Fax: +880-2-9000244, E-mail: [email protected], web: www.labtex.com.bd
ISO 17025 Certified by NABL
Testing Capability & Price List
F. COMPOSITION TEST Srl.#
Test Properties Test Method US/Canada
Test Method EU/Others
Price (US$)
66. Qualitative Analysis ( Microscopic Method ) AATCC 20 ISO 1833, BS4407 15
67. Quantitative Analysis a. Mechanical Method/Chemical Method (upto 2 Common Fiber)
AATCC 20A ASTM D629
BS 4407 ISO 1833 ISO 5088
15 7 rebiF lanoitidda hcaE
b. By Microscopic Method (i) Natural Cellulosic Fiber (Cotton, Linen)
15
2 Cellulosic Fiber Blend (Cotton & Viscose, Linen & Viscose) 100 05 looW )ii(
G. TEXTILE ANALYTICAL TEST Srl.#
Test Properties Test Method US/Canada
Test Method EU/Others
Price (US$)
68. 81 dohtem tset esuoh-nI kcehC topS – edyhedlamroF 211 CCTAA tseT esaeleR – edyhedlamroF ISO 14184-1/ISO
14184-2/EN ISO 14184-1/EN ISO 14184-2/JIS L
1041
50
69. 81 dohtem tset esuoh-nI tseT topS lekciN
H. OTHER TEST Srl.#
Test Properties Test Method US/Canada
Test Method EU/Others
Price (US$)
70. Farnsworth-Munsell 100 Hue Test & Ishihari Colour Vision Test
90 for 3Person Group
71. Metal Detection Test (For each 1000 Pcs Garments) 100
Page 7 of 7 Update: 09-03-2010
Corporate member MemberOrganizational Member Corporate member
labTEX Services, CET, Industrial Plot # 1, Block-E, Avenue-1 (Kalshi), Mirpur-11, Dhaka-1216, Phone: 880-2-8010120, 8057052, Ext.: 5198, 5199, Dir: 805 1271 Fax: +880-2-9000244, E-mail: [email protected], web: www.labtex.com.bd
ISO 17025 Certified by NABL