Test Results Summary for Catalyst 9800 Series Wireless … · CONTENTS CHAPTER 1 Overview 1...
Transcript of Test Results Summary for Catalyst 9800 Series Wireless … · CONTENTS CHAPTER 1 Overview 1...
Test Results Summary for Catalyst 9800 Series Wireless Controller andEWC 17.1 for Japan (Release Version 17.1.20200103 )First Published: 2020-01-23
Last Modified: 2020-03-11
Americas HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706USAhttp://www.cisco.comTel: 408 526-4000
800 553-NETS (6387)Fax: 408 527-0883
© Cisco Systems, Inc. All rights reserved.
C O N T E N T S
Overview 1C H A P T E R 1
Catalyst 9800 and EWC test 1
Test Topology and Environment Matrix 7C H A P T E R 2
Test Topology 7
Component Matrix 8
What's New ? 10
Open Caveats 11
Resolved Caveats 12
New Features 13C H A P T E R 3
EWC HA 13
iPSK Peer-2-Peer Blocking 15
EoGRE Support for ME 31
BSS Coloring on AX APs 32
Scheduled Config Download 34
Cisco Catalyst 9800 Series Wireless Controller WebUI enhancements - Phase 2 38
DNAC Support for EWC 42
CMX Parity for Cisco Catalyst 9800 Series Wireless Controller ME 44
Browser rendering 46
EWC Crashes(DHCP/Troubleshootings) 53
EWC Day0 Elimination 55
ISSU 56
DNA Assurance 57
Catalyst 9800 Crashes(DHCP/Troubleshootings) 62
mDNS Support for Wired Guest Ac 64
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )iii
NAT Support for Mobility Tunnel 65
Open DNS 65
RSSI and SNR in ASSOC request 67
WGB 69
Intelligent Capture 72
DNAc support for Cisco Catalyst 9800 Series Wireless Controller 74
Support of Trap notification via SNMP3 76
mDNS AP support 78
Psk Multi Auth Support 80
Inter Release Controller Mobility 83
Mesh and Flex+Bridge Support on all Indoor Wave 2 AP's 88
Regression Features - Test Summary 93C H A P T E R 4
TACACS 94
Hotspot 2.0 96
Mac filtering (for L2 security) 99
Syslogs 102
NAT 105
Rogue AP 106
Internal DHCP Server 107
Open DNS 108
Maximum number of clients per WLAN/radio 110
SNMP trap receivers 113
CWA (Central Web Authentication) 115
AAA Override of VLAN Name-id template 119
802.1x support with EAP-TLS and EAP-PEAP 124
Software update using SFTP 126
Capwap Image Conversion 127
ME AP convert to CAPWAP via DHCP Option 129
CMX Support 130
Aging Test Cases 134
SFTP Domain Name support 137
MC2UC (Videostreaming) 138
mDNS Support 142
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )iv
Contents
Schedule WLAN Support (Calendar Profile on CLI) 144
Optimized Roaming 146
Authentication Survivability Support 149
Master AP Failover Issues 154
Intelligent Capture-eWC 155
Captive Portal with Internal, External 157
Lobby Ambassador 158
AP 4800 Support 159
WPA3 Support 165
OWE Support 167
Best Practices WebUI 169
Image Predownload 170
Image Download Method : HTTP Upload 172
Config Wireless 175
SR Cases 175
Related Documentation 187C H A P T E R 5
Related Documentation 187
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )v
Contents
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )vi
Contents
C H A P T E R 1Overview
• Catalyst 9800 and EWC test , on page 1
Catalyst 9800 and EWC testCisco Catalyst 9800 and EWC test , an integral part of the enterprise wireless solution, is a program thatvalidates various CiscoWireless Products and Features. This is achieved by testing the latest versions of Ciscowireless products
Cisco Catalyst 9800 and EWC for Japan , in turn is an add-on testing at the solution level, where therequirements gathered are specific to Japanese usage and market. The requirements are derived based on thefollowing:
• New features in Catalyst 9800 and EWC 17.1
• High priority scenarios and basic regression features
• Inputs from Cisco SEs/ TAC
The test execution is carried out on selected CiscoWireless LAN products, which affect the Japanese segmentthat are prioritized by Cisco Japan team.
The following products are covered in the test execution:
• Cisco Catalyst 9800 Series Wireless Controller
• Cisco Virtual Elastic Wireless LAN Controller 9800
• Cisco Catalyst 9800-CL
• Cisco Embedded Wireless Controller on Catalyst Access Points
• Cisco Wireless LAN Controller 8540
• Cisco Wireless LAN Controller 5520
• Cisco Wireless LAN Controller 3504
• Cisco Mobility Express 1850
• Cisco Mobility Express 1830
• Cisco Mobility Express 1815I
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )1
• Cisco Mobility Express 2800
• Cisco Mobility Express 3800
• Cisco Mobility Express 4800
• Cisco Mobility Express 1562
• APIC-EM Controller appliance
• Connected Mobile Experiences (CMX)
• Cisco Prime Infrastructure (Physical-UCS,VM)
• ISE(VM)
• 9800 Controller
• Cisco ISR 1100
• Cisco AP c9115
• Cisco AP c9120
• Cisco AP c9130
• Autonomous AP
• Access Point 4800
• Access Point 3800
• Access Point 2800
• Access Point 3700
• Access Point 2700
• Access Point 1700
• Access Point 1570
• Access Point 1542
• Access Point 1530
• Access Point 702I
• Access Point 1850
• Access Point 1830
• Access Point 1815I
• Access Point 1815W
• Access Point 1810
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )2
OverviewCatalyst 9800 and EWC test
Acronyms
DescriptionAcronym
Authentication Authorization and AccountingAAA
Access Control ListACL
Access Control ServerACS
Authentication Key ManagementAKM
Access PointAP
Application Programming InterfaceAPI
Application Policy Infrastructure Controller - Enterprise ModuleAPIC-EM
Air-Time FairnessATF
Application Visibility and Control.AVC
Bridge Group NetworkBGN
Bluetooth Low EnergyBLE
Bring Your Own DeviceBYOD
Central AuthenticationCA
Call Admissions ControlCAC
Control and Provisioning of Wireless Access PointCAPWAP
Cisco Centralized Key ManagementCCKM
Channel Change NotificationCCN
Cisco Compatible ExtensionsCCX
Cisco Discovery ProtocolCDP
Cisco Key Integrity ProtocolCKIP
Connected Mobile ExperienceCMX
Cisco Vector Beam FormingCVBF
Central Web AuthenticationCWA
Dynamic Channel AssignmentDCA
Demilitarized ZoneDMZ
Domain Name SystemDNS
Digital Network Architecture CenterDNA-C
Delivery Traffic Indication MapDTIM
Differentiated Services Code PointDSCP
Datagram Transport Layer SecurityDTLS
Extensible Authentication ProtocolEAP
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )3
OverviewCatalyst 9800 and EWC test
DescriptionAcronym
End User Licence AgreementEULA
Embedded Wireless ControllerEWC
Flex Local AuthenticationFLA
Flex Local SwitchingFLS
Fast TransitionFT
File Transfer ProtocolFTP
Firm WareFW
High AvailabilityHA
Hybrid Remote Edge Access PointH-REAP
Internetwork Operating SystemIOS
Identity Service EngineISE
Integrated Services RouterISR
Link AggregationLAG
Lightweight Extensible Authentication ProtocolLEAP
Location Specific ServicesLSS
Lightweight Access Point ProtocolLWAPP
Mesh Access PointMAP
Modulation Coding SchemeMCS
Management Frame ProtectionMFP
multicast Domain Name SystemmDNS
Message Integrity CheckMIC
Mobility Service EngineMSE
Maximum Transmission UnitMTU
Network Admission ControlNAC
Network Address TranslationNAT
Network Based Application RecognitionNBAR
Network Control SystemNCS
Next Generation Wiring closetNGWC
Network Mobility Services ProtocolNMSP
Office Extended Access PointOEAP
Protected Extensible Authentication ProtocolPEAP
Policy Enforcement ModulePEM
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )4
OverviewCatalyst 9800 and EWC test
DescriptionAcronym
Prime InfrastructurePI
Protected Management FramePMF
Point of InterestPOI
Point-to-Point Protocol over EthernetPPPoE
Pre-shared KeyPSK
Quality of serviceQOS
Remote Authentication Dial-In User ServiceRADIUS
Root Access PointRAP
Redundancy PortRP
Radio Resource ManagementRRM
Software Defined NetworkingSDN
Simple Object Access ProtocolSOAP
Secure File Transfer ProtocolSFTP
Simple Network Management ProtocolSNMP
Spatial StreamSS
Service Set IdentifierSSID
Single Sign OnSSO
Stateful Switch OverSSO
Software Image ManagementSWIM
Terminal Access Controller Access Control SystemTACACS
Transmission Control ProtocolTCP
Trivial File Transfer ProtocolTFTP
Transport Layer SecurityTLS
User Datagram ProtocolUDP
Virtual Wireless LAN ControllervWLC
Virtual port channelVPC
Virtual Private NetworkVPN
Wired Equivalent PrivacyWEP
Workgroup BridgeWGB
Wireless Intrusion Prevention SystemwIPS
Wireless LANWLAN
Wireless LAN ControllerWLC
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )5
OverviewCatalyst 9800 and EWC test
DescriptionAcronym
Wi-Fi Protected AccessWPA
Wireless Security ModuleWSM
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )6
OverviewCatalyst 9800 and EWC test
C H A P T E R 2Test Topology and Environment Matrix
• Test Topology, on page 7• Component Matrix, on page 8• What's New ?, on page 10• Open Caveats, on page 11• Resolved Caveats, on page 12
Test Topology
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )7
Component MatrixVersionComponentCategory
17.1Cisco Catalyst 9800 SeriesWireless Controller
Controller
17.1Cisco Catalyst 9800-CL
17.1Cisco Catalyst 9800-L WirelessController
17.1Cisco Embedded WirelessController on Catalyst AccessPoints
8.10.105.0Wireless LAN Controller 8540
8.10.105.0Wireless LAN controller 5520
8.10.105.0Wireless LAN controller 3504
8.10.105.0Virtual Controller
8.10.105.0CME 1562/1850/1830
8.10.105.0CME 4800/3800/2800
3.8.0.0.284Prime Infrastructure (VirtualAppliance, UCS based)
Applications
2.7ISE(VM)
10.6CMX(Physical (3375), VM)
1.3.1DNAC
8.0.150.0MSE(Physical (3365), VM)
1.6APIC-EM Controller appliance
12.6.0Cisco Jabber for Windows,iPhone
1.4Cisco Air Provisioning App
1.0.228Cisco Wireless App
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )8
Test Topology and Environment MatrixComponent Matrix
VersionComponentCategory
17.1Cisco AP 9115Access Point
17.1Cisco AP 9120
17.1Cisco AP 9130
17.1Cisco 1100 ISR
15.3Cisco AP 4800
15.3Cisco AP 3800
15.3Cisco AP 2800
15.3Cisco AP 3700
15.3Cisco AP 2700
15.3Cisco AP 1700
15.3Cisco AP 1850
15.3Cisco AP 1830
15.3Cisco AP 1815
15.3Cisco AP 1810
15.3Cisco AP 1570
15.3Cisco AP 1562
15.3Cisco AP 1542
15.3Cisco AP 1532
15.3Cisco AP 702I
17.1Cisco Cat 9300Switch
17.1Cisco Cat 9200L
17.1Cisco Cat 9800
15.0(2)SE2Cisco 3750V2 switch
15.1(1)SY1Cisco Cat 6509-E
15.40.41.50585300, 6300 AGNChipset
20.120.07265 AC
7.7.9Airport Extreme
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )9
Test Topology and Environment MatrixComponent Matrix
VersionComponentCategory
Windows 8 & 8.1 EnterpriseOperating System(JOS)Client
Windows XP Professional
Windows 10
Mac OS 10.15AppleMac Book Pro, AppleMacBook Air (JP Locale)
iOS 13.3.1iPad Pro
iOS 13.3.1iPhone 6, 6S ,7 & 11 (JP Locale)
Android 10.0Samsung Galaxy S7,S10, Nexus6P, Sony Xperia XZ
11.0.4-14Wireless IP Phone 8821
Windows 7 EnterpriseEnd points
Apple Mac 10.15
Windows 8 & 8.1
iPhone 6,6S ,7 & 11
Windows 10
Samsung Galaxy S4, S7,S10, Nexus6P, Sony Xperia
4.8.175Cisco AnyConnect VPN Client
NAHyper location ModuleModule
Windows 2008R2 EnterpriseADActive Directory
12.5.0.99832-3/12.5.0.99832-3-1(JP)Cisco Unified CommunicationsManager
Call Control
11.0.11IEBrowsers
72Mozilla Firefox
13Safari
79Chrome
What's New ?EWC
• EWC HA• PSK + Multi-auth Support• EoGRE Support for ME• iPSK Peer-2-Peer Blocking• BSS Coloring on AX APs
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )10
Test Topology and Environment MatrixWhat's New ?
• Scheduled Config Download• Cisco Catalyst 9800 Series Wireless Controller WebUI enhancements - Phase 2• DNAC Support for EWC• CMX Parity for Cisco Catalyst 9800 Series Wireless Controller ME• Browser Rendering Coverage• EWC Crashes(DHCP/Troubleshootings)• EWC Day0 Elimination
Cisco Catalyst 9800 Series Wireless Controller
• ISSU• DNA Assurance• Cisco Catalyst 9800 Series Wireless Controller Crashes(DHCP/Troubleshootings)• PSK + Multi-auth Support• mDNS Support for Wired Guest Ac• NAT Support for Mobility Tunnel• iPSK P2P blocking• Open DNS• RSSI and SNR in ASSOC request• WGB• Intelligent Capture• DNAc support for Cisco Catalyst 9800 Series Wireless Controller• Support of Trap notification via SNMP3• mDNS AP support• Mesh and Flex+Bridge Support on all Indoor Wave 2 AP's• Inter Release Controller Mobility• Browser Rendering Coverage
Open CaveatsTittleDefect ID
Configuration backup & restore is not working via SFTP GUI Transfermode
CSCvs41888
Observed memory leakage in C9800-L-C-K9CSCvs43516
mDNS service policy not able to configure inLocalPolicy->ServiceTemplate in Cisco Catalyst 9800 Series WirelessController
CSCvs50296
Client TDL auth_key_mgmt unmarshal fails causing not loading foropen security client
CSCvs53410
Not able to configure MFP configuration through helping guidenavigation in Cisco Catalyst 9800 Series Wireless Controller UI
CSCvs23453
NMSP_SSL_ERROR_DISCONNECT message is flooded in CiscoCatalyst 9800 Series Wireless Controller
CSCvs78121
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )11
Test Topology and Environment MatrixOpen Caveats
Required Password encryption for config files in Cisco Catalyst 9800Series Wireless Controller
CSCvs61119
Observed 9115 Ap crashCSCvs43415
Resolved CaveatsTittleDefect ID
AP 1810 Crash due to OOM, apsw_watchdog: apsw_watchdog about to rebootwith reason: oom
CSCvs21281
Samsung s10 client not able to connect to the WPA2+WPA3-SAE+PSK+FTPSK+PSK-SHA2 Mixed mode.
CSCvr33062
File Manager Options Not Working in Japanese UI.CSCvs53376
Update & Apply to device button is not working after configure Ft-PSK withWPA2+WPA3 in GUI.
CSCvs21105
Observed error like "Error in Configuring WLAN" while modifying WLANConfiguration
CSCvs29345
User can able to create a WLAN with WPA3-PSK security without WPA2.CSCvs32392
Pre-shared key option is not showing in GUI for PSK-SHA256.CSCvs59816
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )12
Test Topology and Environment MatrixResolved Caveats
C H A P T E R 3New Features
• EWC HA , on page 13• iPSK Peer-2-Peer Blocking, on page 15• EoGRE Support for ME, on page 31• BSS Coloring on AX APs, on page 32• Scheduled Config Download , on page 34• Cisco Catalyst 9800 Series Wireless Controller WebUI enhancements - Phase 2, on page 38• DNAC Support for EWC, on page 42• CMX Parity for Cisco Catalyst 9800 Series Wireless Controller ME, on page 44• Browser rendering, on page 46• EWC Crashes(DHCP/Troubleshootings), on page 53• EWC Day0 Elimination, on page 55• ISSU, on page 56• DNA Assurance, on page 57• Catalyst 9800 Crashes(DHCP/Troubleshootings), on page 62• mDNS Support for Wired Guest Ac, on page 64• NAT Support for Mobility Tunnel, on page 65• Open DNS, on page 65• RSSI and SNR in ASSOC request, on page 67• WGB, on page 69• Intelligent Capture, on page 72• DNAc support for Cisco Catalyst 9800 Series Wireless Controller , on page 74• Support of Trap notification via SNMP3, on page 76• mDNS AP support, on page 78• Psk Multi Auth Support, on page 80• Inter Release Controller Mobility, on page 83• Mesh and Flex+Bridge Support on all Indoor Wave 2 AP's, on page 88
EWC HADefect IDStatusDescriptionTitleLogical ID
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )13
PassedTo Convert theCatalyst AP as EWCand check if the APcomes Up asPrimary EWCor not
Converting CatalystAP as EWC
EWCJ171S_HA_1
PassedTo configuringEWCHA(Primary/Standby)Setup with twoCatalyst Aps andcheck if the primaryand standby are insync
Configuring EWCHA(Primary/Standby)Setup with twoCatalyst APs
EWCJ171S_HA_2
PassedTo check if theauto-config forselection of standbyEWC happens andverifying if thestandby shown in UIor not
Check Auto configof standby happensand verifying samein UI
EWCJ171S_HA_3
PassedTo check if thestandbyEWCcomesas primary EWCafter the Primaryfailover .
Verifying primaryEWC failover tocheck behaviour ofstandby EWC
EWCJ171S_HA_4
PassedTo make thepreferred master asprimary after dualfailover of primaryand standbycontroller
After Dual failoverof primary andstandby makingpreferred master asPrimary EWC
EWCJ171S_HA_5
CSCvs48833FailedTo check the chassisnumber during HAsetup and afterPrimary failover
Check the chassisnumber during andafter failover
EWCJ171S_HA_6
PassedTo check the statusof the EWC primaryand standby in CiscoDNAC
Check the status ofthe EWC primaryand standby in CiscoDNAC
EWCJ171S_HA_7
PassedTo upgrade theimage of the EWCafter the primaryfailover and check ifthe upgrade of EWCis successful or not
Upgrading theimage of the EWCafter the primaryswitchover
EWCJ171S_HA_8
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )14
New FeaturesEWC HA
PassedTo upgrading theimage when theEWC is kept in HAsetup and checkimage versions onboth primary andstandby
Upgrading theimage when theEWC is kept in HAsetup and checkimage versions onboth primary andstandby
EWCJ171S_HA_9
PassedTo makeconfigurationbackup when theEWC is in HA setup
Configurationbackup and restorewhen the EWC is inHA setup
EWCJ171S_HA_10
PassedTo makeconfigurationbackup after primaryfailover withstandby EWC
Configurationbackup and restoreafter primaryfailover withstandby EWC
EWCJ171S_HA_11
PassedTo connect a clientto EWC when theEWC is in HA setupwith primary andstandby
Connecting a clientto EWC when theEWC is in HA setupwith primary andstandby
EWCJ171S_HA_12
PassedTo connect a clientto EWC andmakingPrimary failover andcheck if there istraffic loss duringfailover
Connecting a clientto EWC andmakingPrimary failover andcheck if there istraffic loss duringfailover
EWCJ171S_HA_13
PassedTo connect a clientto EWC when theEWC is in HA setupwith primary andstandby
Connecting a clientto EWC when theEWC is in HA setupwith primary andstandby
EWCJ171S_HA_14
iPSK Peer-2-Peer BlockingDefect IDStatusDescriptionTitleLogical ID
PassedTo verify whetheriPSK tag generatedor not WhenWindow JOSconnected to iPSKenabled WLANProfile
Verifying the iPSKtag generation forthe ConnectedWindow JOSClient in EWCUI/CLI
EWCJ171S_EWC_iPSKP2P blocking_1
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )15
New FeaturesiPSK Peer-2-Peer Blocking
PassedTo verify whetheriPSK tag generatedor not When MACOS connected toiPSK enabledWLAN Profile
Verifying the iPSKtag generation forthe ConnectedMAC OS Client inEWC UI/CLI
EWCJ171S_EWC_iPSKP2P blocking_2
PassedTo verify whetheriPSK tag generatedor not When iOSconnected to iPSKenabled WLANProfile
Verifying the iPSKtag generation forthe Connected iOSClient in EWCUI/CLI
EWCJ171S_EWC_iPSKP2P blocking_3
PassedTo verify whetheriPSK tag generatedor not WhenAndroid connectedto iPSK enabledWLAN Profile
Verifying the iPSKtag generation forthe ConnectedAndroid Client inEWC UI/CLI
EWCJ171S_EWC_iPSKP2P blocking_4
PassedTo verify whetherwindows JOSclients are able toping each other ornot when theyshare the sameiPSK tag
Verifying peer topeercommunication ofWindows JOSclients whilesharing same iPSKtag
EWCJ171S_EWC_iPSKP2P blocking_5
PassedTo verify whetherMAC OS clientsare able to pingeach other or notwhen they sharethe same iPSK tag
Verifying peer topeercommunication ofMAC clients whilesharing same iPSKtag
EWCJ171S_EWC_iPSKP2P blocking_6
PassedTo verify whetheriOS clients are ableto ping each otheror not when theyshare the sameiPSK tag
Verifying peer topeercommunication ofiOS clients whilesharing same iPSKtag
EWCJ171S_EWC_iPSKP2P blocking_7
PassedTo verify whetherwindows AndroidOS clients are ableto ping each otheror not when theyshare the sameiPSK tag
Verifying peer topeercommunication ofAndroid clientswhile sharing sameiPSK tag
EWCJ171S_EWC_iPSKP2P blocking_8
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )16
New FeaturesiPSK Peer-2-Peer Blocking
PassedTo verify whetherwindows JOSclients are able toping each other ornot when theyshare the differentiPSK tag
Verifying peer topeercommunication ofWindows JOSclients whilesharing differentiPSK tag
EWCJ171S_EWC_iPSKP2P blocking_9
PassedTo verify whetherMAC OS clientsare able to pingeach other or notwhen they sharethe different iPSKtag
Verifying peer topeercommunication ofMAC clients whilesharing differentiPSK tag
EWCJ171S_EWC_iPSKP2P blocking_10
PassedTo verify whetheriOS clients are ableto ping each otheror not when theyshare the differentiPSK tag
Verifying peer topeercommunication ofiOS clients whilesharing differentiPSK tag
EWCJ171S_EWC_iPSKP2P blocking_11
PassedTo verify whetherwindows AndroidOS clients are ableto ping each otheror not when theyshare the differentiPSK tag
Verifying peer topeercommunication ofAndroid clientswhile sharingdifferent iPSK tag
EWCJ171S_EWC_iPSKP2P blocking_12
PassedTo verify whetherthe differentplatformOS clientscan ping each otheror not when theyshare the sameiPSK tag
Verifying peer topeercommunication ofdifferent OS clientswhen clients sharesame iPSK Tag
EWCJ171S_EWC_iPSKP2P blocking_13
PassedTo verify whetherthe differentplatformOS clientscan ping each otheror not when theyshare the sameiPSK tag
Verifying peer topeercommunication ofdifferent OS clientswhen clients sharedifferent iPSK Tag
EWCJ171S_EWC_iPSKP2P blocking_14
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )17
New FeaturesiPSK Peer-2-Peer Blocking
PassedTo verify whetherthe differentplatformOS clientscan ping each otheror not when theyshare the sameiPSK tag withcentral Switching
Verifying peer topeer action ofconnected clientswith same iPSK tagin case of centralswitching mode
EWCJ171S_EWC_iPSKP2P blocking_15
PassedTo verify whetherthe differentplatformOS clientscan ping each otheror not when theyshare the sameiPSK tag with localswitching
Verifying peer topeer action ofconnected clientswith same iPSK tagin case of localswitching
EWCJ171S_EWC_iPSKP2P blocking_16
PassedTo verify whetherthe differentplatformOS clientscan ping each otheror not when theyshare the differentiPSK tag withcentral Switching
Verifying peer topeer action ofconnected clientswith different iPSKtag in case ofcentral switchingmode
EWCJ171S_EWC_iPSKP2P blocking_17
PassedTo verify whetherthe differentplatformOS clientscan ping each otheror not when theyshare the differentiPSK tag with localswitching
Verifying peer topeer action ofconnected clientswith different iPSKtag in case of localswitching
EWCJ171S_EWC_iPSKP2P blocking_18
PassedTo verify whetherall the clientssharing iPSK tagare shown or not inEWC CLI
Verifyingconnected clientswith the particulariPSK tag in CLI
EWCJ171S_EWC_iPSKP2P blocking_19
CSCvs77751FailedTo verify whetherwlan profile can becreated or not withthe iPSKconfigurationthrough the EWCWeb
Verifying the wlanconfiguration withiPSK tagConfigurationthrough EWCWeb
EWCJ171S_EWC_iPSKP2P blocking_20
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )18
New FeaturesiPSK Peer-2-Peer Blocking
PassedTo verify whetherwlan profile can becreated or not withthe iPSKconfigurationthrough the EWCCLI
Verifying the wlangeneration withiPSK tagConfigurationthrough EWC CLI
EWCJ171S_EWC_iPSKP2P blocking_21
PassedTo verify whetheriPSK tag isgenerated or not forthe connectedclients
Verifying iPSK tagfor the for differentOS clients withFlex+BridgeMode
EWCJ171S_EWC_iPSKP2P blocking_22
PassedTo verify whetherclients iPSK isbeing generatedfrom secondaryAAA server or not
Verifying clientsconnectivity withiPSK tag whileradius fall-back isenabled
EWCJ171S_EWC_iPSKP2P blocking_23
PassedTo verify whetheriPSK generated ornot whenWLAN isenabled withFT-PSK
Verifyinggeneration of iPSKtag with FT-PSKfor different OSclients
EWCJ171S_EWC_iPSKP2P blocking_24
PassedTo verify whetherthe differentplatformOS clientscan ping each otheror not based on theiPSK tag
Verifyingconnectivity amongthe clients whenclients areconnected todifferent WLAN
EWCJ171S_EWC_iPSKP2P blocking_25
PassedTo verify whetherthe wlanconfigurationretains same or notafter exporting thesame configurationfile
Verifying iPSKWLANconfiguration afterimporting andexporting the sameconfiguration file
EWCJ171S_EWC_iPSKP2P blocking_26
PassedTo verify whetherthe same platformOS clients can pingeach other or notwhen they sharethe same iPSK tagwith centralSwitching
Verifying peer topeer action ofconnected clientswith same iPSK tagin case of centralswitching mode
EWCJ171S_EWC_iPSKP2P blocking_27
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )19
New FeaturesiPSK Peer-2-Peer Blocking
PassedTo verify whetherthe same platformOS clients can pingeach other or notwhen they sharethe same iPSK tagwith localswitching
Verifying peer topeer action ofconnected clientswith same iPSK tagin case of localswitching
EWCJ171S_EWC_iPSKP2P blocking_28
PassedTo verify whetherthe same platformOS clients can pingeach other or notwhen they sharethe different iPSKtag with centralSwitching
Verifying peer topeer action ofconnected clientswith different iPSKtag in case ofcentral switchingmode
EWCJ171S_EWC_iPSKP2P blocking_29
PassedTo verify whetherthe same platformOS clients can pingeach other or notwhen they sharethe different iPSKtag with localswitching
Verifying peer topeer action ofconnected clientswith different iPSKtag in case of localswitching
EWCJ171S_EWC_iPSKP2P blocking_30
PassedTo verify whetheriPSK tag isgenerated or not forthe connectedclients
Verifying iPSK tagfor the for SameOS clients withFlex+BridgeMode
EWCJ171S_EWC_iPSKP2P blocking_31
PassedTo verify whetheriPSK generated ornot whenWLAN isenabled withFT-PSK for sameOS Clients.
Verifyinggeneration of iPSKtag with FT-PSKfor same OSclients.
EWCJ171S_EWC_iPSKP2P blocking_32
PassedTo verify whetherthe same platformOS clients can pingeach other or notwhen they sharethe different iPSKtag in case of localswitching withFT-PSK.
Verifying peer topeer action of sameOS clients withdifferent iPSK tagin case of localswitching withFT-PSK.
EWCJ171S_EWC_iPSKP2P blocking_33
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )20
New FeaturesiPSK Peer-2-Peer Blocking
PassedTo verify whetherthe differentplatformOS clientscan ping each otheror not when theyshare the differentiPSK tag in case oflocal switchingwith FT-PSK forthe
Verifying peer topeer action ofdifferent OS clientswith different iPSKtag in case of localswitching withFT-PSK
EWCJ171S_EWC_iPSKP2P blocking_34
PassedTo verify whetheriPSK tag generatedor not WhenAnyconnect clientconnected to iPSKenabled WLANProfile
Verifying the iPSKtag generation forthe Connectedanyconnect Clientin EWC UI/CLI
EWCJ171S_EWC_iPSKP2P blocking_35
PassedTo verify whetheriPSK tag generatedor not for the samepassword withdifferent groups
Verifying the iPSKtag generation forthe same passwordwith differentgroups.
EWCJ171S_EWC_iPSKP2P blocking_36
PassedTo verify whetheriPSK generated ornot whenWLAN isenabled withWPA-TkIP-PSK
Verifying thegeneration of ipsktag withWPA-TKIP-PSkfor same/differentos clients.
EWCJ171S_EWC_iPSKP2P blocking_37
PassedTo Verify the peerto peercommunication ofdifferent clientsconnected todifferent SSIDs insame networkgroup in case ofcentral switching.
Verifying the peerto peercommunication ofdifferent clientsconnected todifferent SSIDs insame networkgroup in case ofCentral Switching.
EWCJ171S_EWC_iPSKP2P blocking_38
PassedTo Verify the peerto peercommunication ofdifferent clientsconnected todifferent SSIDs indifferent networkgroup in case ofcentral switching.
Verifying the peerto peercommunication ofdifferent clientsconnected todifferent SSIDs inDifferent networkgroups in case ofcentral switching.
EWCJ171S_EWC_iPSKP2P blocking_39
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )21
New FeaturesiPSK Peer-2-Peer Blocking
PassedTo Verify the peerto peercommunication ofdifferent clientsconnected todifferent SSIDs insame networkgroup in case oflocal switching.
Verifying the peerto peercommunication ofdifferent clientsconnected todifferent SSIDs insame networkgroup in case ofLocal Switching.
EWCJ171S_EWC_iPSKP2P blocking_40
PassedTo Verify the peerto peercommunication ofdifferent clientsconnected todifferent SSIDs indifferent networkgroup in case oflocal switching.
Verifying the peerto peercommunication ofdifferent clientsconnected todifferent SSIDs inDifferent networkgroup in case oflocal switching.
EWCJ171S_EWC_iPSKP2P blocking_41
PassedTo verify whetheriPSK tag and peerto peercommunication forSame OS clientswith Flex+BridgeMode in case oflocal switchingwith same group
Verifying iPSK tagand peer to peercommunication forthe for Same OSclients withFlex+BridgeModein case of localswitching withsame group
EWCJ171S_EWC_iPSKP2P blocking_42
PassedTo verify whetheriPSK tag and peerto peercommunication fordifferent OS clientswith Flex+BridgeMode in case oflocal switchingwith same group
Verifying iPSK tagand peer to peercommunication forthe for different OSclients withFlex+BridgeModein case of localswitching withsame group
EWCJ171S_EWC_iPSKP2P blocking_43
PassedTo verify whetheriPSK tag and peerto peercommunication forSame OS clientswith Flex+BridgeMode in case oflocal switchingwith differentgroup
Verifying iPSK tagand peer to peercommunication forthe for Same OSclients withFlex+BridgeModein case of localswitching withdifferent group
EWCJ171S_EWC_iPSKP2P blocking_44
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )22
New FeaturesiPSK Peer-2-Peer Blocking
PassedTo verify whetheriPSK tag and peerto peercommunication fordifferent OS clientswith Flex+BridgeMode in case oflocal switchingwith differentgroup
Verifying iPSK tagand peer to peercommunication forthe for different OSclients withFlex+BridgeModein case of localswitching withdifferent group
EWCJ171S_EWC_iPSKP2P blocking_45
PassedTo verify whetherthe client isroaming from oneAp to another Ap.
Verifying clientsroaming with sameiPSK tag
EWCJ171S_EWC_iPSKP2P blocking_46
PassedTo verify whetherthe client isroaming from oneAp to another Ap.
Verifying clientsroaming withdifferent iPSK tag
EWCJ171S_EWC_iPSKP2P blocking_47
PassedTo verify whetheriPSK tag generatedor not WhenWindow JOSconnected to iPSKenabled WLANProfile
Verifying the iPSKtag generation forthe ConnectedWindow JOSClient in CiscoCatalyst 9800Series WirelessController UI/CLI
EWLCJ171S_iPSK_P2P_01
PassedTo verify whetheriPSK tag generatedor not When MACOS connected toiPSK enabledWLAN Profile
Verifying the iPSKtag generation forthe ConnectedMAC OS Client inCisco Catalyst9800 SeriesWireless ControllerUI/CLI
EWLCJ171S_iPSK_P2P_02
PassedTo verify whetheriPSK tag generatedor not When iOSconnected to iPSKenabled WLANProfile
Verifying the iPSKtag generation forthe Connected iOSClient in CiscoCatalyst 9800Series WirelessController UI/CLI
EWLCJ171S_iPSK_P2P_03
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )23
New FeaturesiPSK Peer-2-Peer Blocking
PassedTo verify whetheriPSK tag generatedor not WhenAndroid connectedto iPSK enabledWLAN Profile
Verifying the iPSKtag generation forthe ConnectedAndroid Client inCisco Catalyst9800 SeriesWireless ControllerUI/CLI
EWLCJ171S_iPSK_P2P_04
PassedTo verify whetherwindows JOSclients are able toping each other ornot when theyshare the sameiPSK tag
Verifying peer topeercommunication ofWindows JOSclients whilesharing same iPSKtag
EWLCJ171S_iPSK_P2P_05
PassedTo verify whetherMAC OS clientsare able to pingeach other or notwhen they sharethe same iPSK tag
Verifying peer topeercommunication ofMAC clients whilesharing same iPSKtag
EWLCJ171S_iPSK_P2P_06
PassedTo verify whetheriOS clients are ableto ping each otheror not when theyshare the sameiPSK tag
Verifying peer topeercommunication ofiOS clients whilesharing same iPSKtag
EWLCJ171S_iPSK_P2P_07
PassedTo verify whetherwindows AndroidOS clients are ableto ping each otheror not when theyshare the sameiPSK tag
Verifying peer topeercommunication ofAndroid clientswhile sharing sameiPSK tag
EWLCJ171S_iPSK_P2P_08
PassedTo verify whetherwindows JOSclients are able toping each other ornot when theyshare the differentiPSK tag
Verifying peer topeercommunication ofWindows JOSclients whilesharing differentiPSK tag
EWLCJ171S_iPSK_P2P_09
PassedTo verify whetherMAC OS clientsare able to pingeach other or notwhen they sharethe different iPSKtag
Verifying peer topeercommunication ofMAC clients whilesharing differentiPSK tag
EWLCJ171S_iPSK_P2P_10
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )24
New FeaturesiPSK Peer-2-Peer Blocking
PassedTo verify whetheriOS clients are ableto ping each otheror not when theyshare the differentiPSK tag
Verifying peer topeercommunication ofiOS clients whilesharing differentiPSK tag
EWLCJ171S_iPSK_P2P_11
PassedTo verify whetherwindows AndroidOS clients are ableto ping each otheror not when theyshare the differentiPSK tag
Verifying peer topeercommunication ofAndroid clientswhile sharingdifferent iPSK tag
EWLCJ171S_iPSK_P2P_12
PassedTo verify whetherthe differentplatformOS clientscan ping each otheror not when theyshare the sameiPSK tag
Verifying peer topeercommunication ofdifferent OS clientswhen clients sharesame iPSK Tag
EWLCJ171S_iPSK_P2P_13
PassedTo verify whetherthe differentplatformOS clientscan ping each otheror not when theyshare the sameiPSK tag
Verifying peer topeercommunication ofdifferent OS clientswhen clients sharedifferent iPSK Tag
EWLCJ171S_iPSK_P2P_14
PassedTo verify whetherthe differentplatformOS clientscan ping each otheror not when theyshare the sameiPSK tag withcentral Switching
Verifying peer topeer action ofconnected clientswith same iPSK tagin case of centralswitching mode
EWLCJ171S_iPSK_P2P_15
PassedTo verify whetherthe differentplatformOS clientscan ping each otheror not when theyshare the sameiPSK tag with localswitching
Verifying peer topeer action ofconnected clientswith same iPSK tagin case of localswitching
EWLCJ171S_iPSK_P2P_16
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )25
New FeaturesiPSK Peer-2-Peer Blocking
PassedTo verify whetherthe differentplatformOS clientscan ping each otheror not when theyshare the differentiPSK tag withcentral Switching
Verifying peer topeer action ofconnected clientswith different iPSKtag in case ofcentral switchingmode
EWLCJ171S_iPSK_P2P_17
PassedTo verify whetherthe differentplatformOS clientscan ping each otheror not when theyshare the differentiPSK tag with localswitching
Verifying peer topeer action ofconnected clientswith different iPSKtag in case of localswitching
EWLCJ171S_iPSK_P2P_18
PassedTo verify whetherall the clientssharing iPSK tagare shown or not inCisco Catalyst9800 SeriesWireless ControllerCLI
Verifyingconnected clientswith the particulariPSK tag in CLI
EWLCJ171S_iPSK_P2P_19
PassedTo verify whetherwlan profile can becreated or not withthe iPSKconfigurationthrough the CiscoCatalyst 9800Series WirelessController Web
Verifying the wlanconfiguration withiPSK tagConfigurationthrough CiscoCatalyst 9800Series WirelessController Web
EWLCJ171S_iPSK_P2P_20
PassedTo verify whetherwlan profile can becreated or not withthe iPSKconfigurationthrough the CiscoCatalyst 9800Series WirelessController CLI
Verifying the wlangeneration withiPSK tagConfigurationthrough CiscoCatalyst 9800Series WirelessController CLI
EWLCJ171S_iPSK_P2P_21
PassedTo verify whetheriPSK tag isgenerated or not forthe connectedclients
Verifying iPSK tagfor the for differentOS clients withFlex+BridgeMode
EWLCJ171S_iPSK_P2P_22
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )26
New FeaturesiPSK Peer-2-Peer Blocking
PassedTo verify whetherclients iPSK isbeing generatedfrom secondaryAAA server or not
Verifying clientsconnectivity withiPSK tag whileradius fall back isenabled
EWLCJ171S_iPSK_P2P_23
PassedTo verify whetheriPSK generated ornot whenWLAN isenabled withFT-PSK
Verifyinggeneration of iPSKtag with FT-PSKfor different OSclients
EWLCJ171S_iPSK_P2P_24
PassedTo verify whetherthe differentplatformOS clientscan ping each otheror not based on theiPSK tag
Verifyingconnectivity amongthe clients whenclients areconnected todifferent WLAN
EWLCJ171S_iPSK_P2P_25
PassedTo verify whetherthe wlanconfigurationretains same or notafter exporting thesame configurationfile
Verifying iPSKWLANconfiguration afterimporting andexporting the sameconfiguration file
EWLCJ171S_iPSK_P2P_26
PassedTo verify whetherthe same platformOS clients can pingeach other or notwhen they sharethe same iPSK tagwith centralSwitching
Verifying peer topeer action ofconnected clientswith same iPSK tagin case of centralswitching mode
EWLCJ171S_iPSK_P2P_27
PassedTo verify whetherthe same platformOS clients can pingeach other or notwhen they sharethe same iPSK tagwith localswitching
Verifying peer topeer action ofconnected clientswith same iPSK tagin case of localswitching
EWLCJ171S_iPSK_P2P_28
PassedTo verify whetherthe same platformOS clients can pingeach other or notwhen they sharethe different iPSKtag with centralSwitching
Verifying peer topeer action ofconnected clientswith different iPSKtag in case ofcentral switchingmode
EWLCJ171S_iPSK_P2P_29
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )27
New FeaturesiPSK Peer-2-Peer Blocking
PassedTo verify whetherthe same platformOS clients can pingeach other or notwhen they sharethe different iPSKtag with localswitching
Verifying peer topeer action ofconnected clientswith different iPSKtag in case of localswitching
EWLCJ171S_iPSK_P2P_30
PassedTo verify whetheriPSK tag isgenerated or not forthe connectedclients
Verifying iPSK tagfor the for SameOS clients withFlex+BridgeMode
EWLCJ171S_iPSK_P2P_31
PassedTo verify whetheriPSK generated ornot whenWLAN isenabled withFT-PSK for sameOS Clients.
Verifyinggeneration of iPSKtag with FT-PSKfor same OSclients.
EWLCJ171S_iPSK_P2P_32
PassedTo verify whetherthe same platformOS clients can pingeach other or notwhen they sharethe different iPSKtag in case of localswitching withFT-PSK.
Verifying peer topeer action of sameOS clients withdifferent iPSK tagin case of localswitching withFT-PSK.
EWLCJ171S_iPSK_P2P_33
PassedTo verify whetherthe differentplatformOS clientscan ping each otheror not when theyshare the differentiPSK tag in case oflocal switchingwith FT-PSK forthe
Verifying peer topeer action ofdifferent OS clientswith different iPSKtag in case of localswitching withFT-PSK
EWLCJ171S_iPSK_P2P_34
PassedTo verify whetheriPSK tag generatedor not WhenAnyconnect clientconnected to iPSKenabled WLANProfile
Verifying the iPSKtag generation forthe Connectedanyconnect Clientin Cisco Catalyst9800 SeriesWireless ControllerUI/CLI
EWLCJ171S_iPSK_P2P_35
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )28
New FeaturesiPSK Peer-2-Peer Blocking
PassedTo verify whetheriPSK tag generatedor not for the samepassword withdifferent groups
Verifying the iPSKtag generation forthe same passwordwith differentgroups.
EWLCJ171S_iPSK_P2P_36
PassedTo verify whetheriPSK generated ornot whenWLAN isenabled withWPA-TkIP-PSK
Verifying thegeneration of ipsktag withWPA-TKIP-PSkfor same/differentos clients.
EWLCJ171S_iPSK_P2P_37
PassedTo Verify the peerto peercommunication ofdifferent clientsconnected todifferent SSIDs insame networkgroup in case ofcentral switching.
Verifying the peerto peercommunication ofdifferent clientsconnected todifferent SSIDs insame networkgroup in case ofCentral Switching.
EWLCJ171S_iPSK_P2P_38
PassedTo Verify the peerto peercommunication ofdifferent clientsconnected todifferent SSIDs indifferent networkgroup in case ofcentral switching.
Verifying the peerto peercommunication ofdifferent clientsconnected todifferent SSIDs inDifferent networkgroups in case ofcentral switching.
EWLCJ171S_iPSK_P2P_39
PassedTo Verify the peerto peercommunication ofdifferent clientsconnected todifferent SSIDs insame networkgroup in case oflocal switching.
Verifying the peerto peercommunication ofdifferent clientsconnected todifferent SSIDs insame networkgroup in case ofLocal Switching.
EWLCJ171S_iPSK_P2P_40
PassedTo Verify the peerto peercommunication ofdifferent clientsconnected todifferent SSIDs indifferent networkgroup in case oflocal switching.
Verifying the peerto peercommunication ofdifferent clientsconnected todifferent SSIDs inDifferent networkgroup in case oflocal switching.
EWLCJ171S_iPSK_P2P_41
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )29
New FeaturesiPSK Peer-2-Peer Blocking
PassedTo verify whetheriPSK tag and peerto peercommunication forSame OS clientswith Flex+BridgeMode in case oflocal switchingwith same group
Verifying iPSK tagand peer to peercommunication forthe for Same OSclients withFlex+BridgeModein case of localswitching withsame group
EWLCJ171S_iPSK_P2P_42
PassedTo verify whetheriPSK tag and peerto peercommunication fordifferent OS clientswith Flex+BridgeMode in case oflocal switchingwith same group
Verifying iPSK tagand peer to peercommunication forthe for different OSclients withFlex+BridgeModein case of localswitching withsame group
EWLCJ171S_iPSK_P2P_43
PassedTo verify whetheriPSK tag and peerto peercommunication forSame OS clientswith Flex+BridgeMode in case oflocal switchingwith differentgroup
Verifying iPSK tagand peer to peercommunication forthe for Same OSclients withFlex+BridgeModein case of localswitching withdifferent group
EWLCJ171S_iPSK_P2P_44
PassedTo verify whetheriPSK tag and peerto peercommunication fordifferent OS clientswith Flex+BridgeMode in case oflocal switchingwith differentgroup
Verifying iPSK tagand peer to peercommunication forthe for different OSclients withFlex+BridgeModein case of localswitching withdifferent group
EWLCJ171S_iPSK_P2P_45
PassedTo verify whetherthe client isroaming from oneAp to another Ap.
Verifying clientsroaming with sameiPSK tag
EWLCJ171S_iPSK_P2P_46
PassedTo verify whetherthe client isroaming from oneAp to another Ap.
Verifying clientsroaming withdifferent iPSK tag
EWLCJ171S_iPSK_P2P_47
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )30
New FeaturesiPSK Peer-2-Peer Blocking
EoGRE Support for MEDefect IDStatusDescriptionTitleLogical ID
PassedTo check whetherthe tunnel gatewayis created or not.
Creating EoGRETunnel Gateway.
EWCJ171S_EWC_EoGRE_1
PassedTo check whetherthe tunnel Domainis created or not.
Creating EoGRETunnel Domain
EWCJ171S_EWC_EoGRE_2
PassedTo check whetherthe globalparameters areconfigured or not.
Configuring theGlobal Parameterfor the EoGRE.
EWCJ171S_EWC_EoGRE_3
PassedTo check whetherthe tunnel profileis created or not.
Configuring thetunnel Profile.
EWCJ171S_EWC_EoGRE_4
PassedTo check whetherthe wlan isassociated with thepolicy profile.
Associate theWLAN to theWireless policyprofile.
EWCJ171S_EWC_EoGRE_5
PassedTo check whetherthe policy and sitetag is added to anAP.
Adding a policytag and site tag toAP
EWCJ171S_EWC_EoGRE_6
PassedTo check whetherthe client isconnected or not
Checking the clientconnectivity.
EWCJ171S_EWC_EoGRE_7
PassedTo check whetherthe tunnel isexported from PIor not
Getting theEoGRE tunnelfrom PI
EWCJ171S_EWC_EoGRE_8
PassedTo check whetherthe iOS clients getconnectedsuccessfully.
Connect the iOSclients and checkthe connectivity.
EWCJ171S_EWC_EoGRE_9
PassedTo check whetherthe mac os clientsget connectedsuccessfully.
Connect the macos clients andcheck theconnectivity.
EWCJ171S_EWC_EoGRE_10
PassedTo check whetherthe traffic in thetunnel is managedor not.
Checking thetraffic in thetunnel.
EWCJ171S_EWC_EoGRE_11
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )31
New FeaturesEoGRE Support for ME
BSS Coloring on AX APsDefect IDStatusDescriptionTitleLogical ID
PassedTo Check whetherautomatic BSScolouring is appliedor not in 2.4 ghzAp radio
ConfiguringAutomatic BSScolouring for 2.4ghz AP radios
EWCJ171S_EWC_BSS_01
PassedTo Check whetherautomatic BSScolouring is appliedor not in 5 ghz Apradio
Configuringautomatic BSScolour for 5ghzradio
EWCJ171S_EWC_BSS_02
CSCvs62656FailedTo verify whetherdifferent BSScolouring is occurwhile Changing theAP radios 2.4 to 5viseversa
Configuring autoBSS colourappearing 2.4 to 5Ghz radio or viceversa
EWCJ171S_EWC_BSS_03
PassedTo Check whetherManual BSScolouring is appliedor not in 2.4 ghzAp radio
ConfiguringManual BSS colourconfiguration for2.4/5 ghz radio
EWCJ171S_EWC_BSS_04
PassedTo Check whetherStatic BSScolouring is appliedor not in 5 ghz Apradio
Verifying the staticBSS colourassignment for the5 ghz radio inFlex-connect mode
EWCJ171S_EWC_BSS_05
CSCvs64155FailedTo verify whetherdifferent BSScolouring is occurwhile Changing theAP radios
Checking themanual BSScolouring whilechanging the APradio from 2.4 ghzto 5 ghz
EWCJ171S_EWC_BSS_06
PassedTo Check whetherthe BSS colourretained after AP&Controller reload
Checking the BSScolour details areretained after APand Controllerreload
EWCJ171S_EWC_BSS_07
PassedTo verify whetherBSS colouringwithclient roamingbetween AP's ornot
Verifying BSScolouring withIntra client roamingby using 9115AP
EWCJ171S_EWC_BSS_08
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )32
New FeaturesBSS Coloring on AX APs
PassedTo check whetherBSS colouring isappearing or not ,when differentradio clients areroaming betweencontrollers
Verifying BSScolouringwith interroaming clientusing differentradio
EWCJ171S_EWC_BSS_09
PassedTo check whetherBSS colouring isappearing or not ,when same radioclients are roamingbetween controllers
Verifying BSScolouringwith interroaming clientusing same radio
EWCJ171S_EWC_BSS_10
PassedTo check thewindow clientconnectivity &BSS colouringusing Wireshark
Capturing theWindows clientconnectivity &BSS colouringusing Wireshark
EWCJ171S_EWC_BSS_11
PassedTo check theAndroid clientconnectivity &BSS colouringusing Wireshark
Capturing theAndroid clientconnectivity &BSS colouringusing Wireshark
EWCJ171S_EWC_BSS_12
PassedTo check the MacOS clientconnectivity &BSS colouringusing Wireshark
Capturing the MacOS clientconnectivity &BSS colouringusing Wireshark
EWCJ171S_EWC_BSS_13
PassedTo change themode of AP fromlocal mode toFlexconnect modeand check the BSScolouringconfiguration in9115 Ap
Changing 9115 APmode from local toFlex connect &check the BSScolouringConfiguration
EWCJ171S_EWC_BSS_14
PassedTo change themode of AP fromflex mode to localmode and check theBSS colouringconfiguration in9115 Ap
Changing 9115 APmode from flex tolocal & check theBSS colouringConfiguration
EWCJ171S_EWC_BSS_15
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )33
New FeaturesBSS Coloring on AX APs
Scheduled Config DownloadDefect IDStatusDescriptionTitleLogical ID
PassedTo verify NewConfig should beapplied whenchanges in oldconfig throughschedule downloadconfiguration usingFTP server
New Configshould be appliedwhen changes inold config throughschedule downloadconfiguration usingFTP server
EWCJ171S_EWC_Scheduleddownload_1
PassedTo verify NewConfig should beapplied whenchanges in oldconfig throughschedule downloadconfiguration usingSFTP server
New Configshould be appliedwhen changes inold config throughschedule downloadconfiguration usingSFTP server
EWCJ171S_EWC_Scheduleddownload_2
PassedTo verify NewConfig should notapplied when oldconfig having nochanges throughschedule downloadconfiguration usingFTP server
New Configshould not appliedwhen old confighaving no changesthrough scheduledownloadconfiguration usingFTP server
EWCJ171S_EWC_Scheduleddownload_3
PassedTo verify NewConfig should notapplied when oldconfig having nochanges throughschedule downloadconfiguration usingSFTP server
New Configshould not appliedwhen old confighaving no changesthrough scheduledownloadconfiguration usingSFTP server
EWCJ171S_EWC_Scheduleddownload_4
PassedTo verify the newconfig should notapply to the Deviceusing FTP transfermodewhen havingbad config inserver
New config shouldnot apply to theDevice using FTPtransfer modewhen having badconfig in server
EWCJ171S_EWC_Scheduleddownload_5
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )34
New FeaturesScheduled Config Download
PassedTo verify the newconfig should notapply to the Deviceusing SFTPtransfer modewhen having badconfig in server
New config shouldnot apply to theDevice using SFTPtransfer modewhen having badconfig in server
EWCJ171S_EWC_Scheduleddownload_6
PassedTo verify Gettingerror messagewhen passingwrong CLIcommands (Wrongformat of server IPaddress) inschedule downloadconfiguration usingFTP/SFTP server
Getting errormessage whenpassing wrong CLIcommands (Wrongformat of server IPaddress) inschedule downloadconfiguration usingFTP/SFTP server
EWCJ171S_EWC_Scheduleddownload_7
PassedTo verify Gettingerror messagewhen passingwrong CLIcommands (Wrongfile path/file name)in scheduledownloadconfiguration usingFTP/SFTP server
Getting errormessage whenpassing wrong CLIcommands (Wrongfile path/ filename) in scheduledownloadconfiguration usingFTP/SFTP server
EWCJ171S_EWC_Scheduleddownload_8
PassedTo verify NewConfig should beapplied whenchanges in oldconfig throughschedule downloadconfiguration usingFTP/SFTP serverwhen passingdomain nameinstead of serveraddress in CLIcommand
New Configshould be appliedwhen changes inold config throughschedule downloadconfiguration usingFTP/SFTP serverwhen passingdomain nameinstead of serveraddress in CLIcommand
EWCJ171S_EWC_Scheduleddownload_9
PassedTo verify NewConfig should notapply whenpreferred MasterAP is up afterdownloadingconfig
New Configshould not applywhen preferredMaster AP is upafter downloadingconfig
EWCJ171S_EWC_Scheduleddownload_10
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )35
New FeaturesScheduled Config Download
PassedTo verify Newconfig should notapply whenpassing file namewhich is notavailable in theserver
New config shouldnot apply whenpassing file namewhich is notavailable in theserver
EWCJ171S_EWC_Scheduleddownload_11
PassedTo verify serverreachable errormessage whenFTP/SFTP sever isdown
verify serverreachable errormessage whenFTP/SFTP sever isdown
EWCJ171S_EWC_Scheduleddownload_12
PassedTo Verify thebehaviour ofschedule configdownload whensystem time ischanged aftersetting hourlyschedule download
Verify thebehaviour ofschedule configdownload whensystem time ischanged aftersetting hourlyschedule download
EWCJ171S_EWC_Scheduleddownload_13
PassedTo Verify EWCshould be come up(after reset) afterdownloading newconfig
Verify EWCshould be come up(after reset) afterdownloading newconfig
EWCJ171S_EWC_Scheduleddownload_14
PassedTo verify Ap joinand clientconnectivity afternew configdownloaded
Verify Ap join andclient connectivityafter new configdownloaded
EWCJ171S_EWC_Scheduleddownload_15
PassedTo verify applynew config whenPrimary controllergoes down andsecondarycontroller is active(when both EWCon same model)after downloadingconfig
Verify apply newconfig whenPrimary controllergoes down andsecondarycontroller is active(when both EWCon same model)after downloadingconfig
EWCJ171S_EWC_Scheduleddownload_16
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )36
New FeaturesScheduled Config Download
PassedTo verify not applynew config whenPrimary controllergoes down andsecondarycontroller is active(when both EWCon different model)after downloadingconfig
Verify not applynew config whenPrimary controllergoes down andsecondarycontroller is active(when both EWCon different model)after downloadingconfig
EWCJ171S_EWC_Scheduleddownload_17
PassedTo check whetherWLAN isbroadcasting or noton configuredStart/End time
Configure theCalendar Profile inopen securityWLAN withStart/End time.
EWLCJ171S_Reg_88
PassedTo check whetherWLAN isbroadcasting or noton configuredStart/End time
Configure theCalendar Profile inWPA2 securityWLAN withStart/End time.
EWLCJ171S_Reg_89
PassedTo check whetherWLAN isbroadcasting or noton configuredStart/End time
Configure theCalendar Profile inWPA3 securityWLAN withStart/End time.
EWLCJ171S_Reg_90
PassedTo check whetherWLAN isbroadcasting or noton configuredStart/End time
Configure theCalendar Profile inStatic WEPsecurity WLANwith Start/Endtime.
EWLCJ171S_Reg_91
PassedTo check whetherWLAN isbroadcasting or noton configuredStart/End time
Configure theCalendar Profile inStatic WEPsecurity WLANwith Start/Endtime withMonthly/Weekly/Dailyoption.
EWLCJ171S_Reg_92
PassedTo check whetherWLAN isbroadcasting or noton configuredStart/End time
Configure theCalendar Profile inStatic WEPsecurity WLANwith L3Security,MACFiltering and withStart/End time .
EWLCJ171S_Reg_93
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )37
New FeaturesScheduled Config Download
PassedTo check whetherclient isdisassociating afterend time.
Observe the ClientDisassociation onCalendar Profileafter end time
EWLCJ171S_Reg_94
Cisco Catalyst 9800 Series Wireless Controller WebUIenhancements - Phase 2
Defect IDStatusDescriptionTitleLogical ID
PassedTo checkwhether theprofile can beadded by enablethe aWIPS inApJoin or not ineWC withJapanese UI
Add the ApProfile byEnabling theaWIPS in UI
EWCJ171S_EWC_UI_Enhancement_1
PassedEdit the DefaultProfile andcheck weatherwe can able toenable theaWIPS or not inCisco Catalyst9800 SeriesWirelessControllerJapanese UI
Edit theDefault Profileand checkweather we canable to enablethe aWIPS
EWCJ171S_EWC_UI_Enhancement_2
PassedTo checkweather anyaWIPS alarmsare displaying ornot undermonitoring->aWIPS pagein Cisco Catalyst9800 SeriesWirelessControllerJapanese UI
To checkweather theaWIPS alarmsare displayinginMonitoring->Security->aWIPSUI page
EWCJ171S_EWC_UI_Enhancement_3
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )38
New FeaturesCisco Catalyst 9800 Series Wireless Controller WebUI enhancements - Phase 2
PassedTo checkweather theGuest LANprofile can becreated or not inCisco Catalyst9800 SeriesWirelessControllerJapanese UI
Create GuestLAN profileCisco Catalyst9800 SeriesWirelessController UI
EWCJ171S_EWC_UI_Enhancement_4
PassedTo CheckweatherRedundancy tabconfigurationcan be appliedby enabling thestatus in CiscoCatalyst 9800Series WirelessControllerJapanese UI
Enableredundancyconfigurationto device
EWCJ171S_EWC_UI_Enhancement_5
PassedTo CheckweatherRedundancyconfigurationcan be Disabledby disabling thestatus in CiscoCatalyst 9800Series WirelessControllerJapanese UI
DisableRedundancyTabconfigurationto device
EWCJ171S_EWC_UI_Enhancement_6
PassedConfigureenhanced URLfilters fromexisting URLfilters page inCisco Catalyst9800 SeriesWirelessControllerJapanese UI
ConfigureEnhancedURLfilters to fromexisting URLfilter page
EWCJ171S_EWC_UI_Enhancement_7
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )39
New FeaturesCisco Catalyst 9800 Series Wireless Controller WebUI enhancements - Phase 2
PassedTo checkweather EoGREdomains andtunnels can beconfiguredthrough CiscoCatalyst 9800Series WirelessController inJapanese UI
EoGREsupport fromUI
EWCJ171S_EWC_UI_Enhancement_8
PassedTo checkweather WLANDashlets tableview changesare working ornot in CiscoCatalyst 9800Series WirelessControllerJapanese UI
WLANDashlets InTable view inUI
EWCJ171S_EWC_UI_Enhancement_9
PassedTo checkweather theWLANDashletsGraphical viewchanges areworking or notin Cisco Catalyst9800 SeriesWirelessControllerJapanese UI
WLANDashletsGraphicalViewin UI
EWCJ171S_EWC_UI_Enhancement_10
PassedTo checkweather the APDashlets Tableview changesare working ornot in CiscoCatalyst 9800Series WirelessControllerJapanese UI
AP Dashlets inTable view inUI
EWCJ171S_EWC_UI_Enhancement_11
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )40
New FeaturesCisco Catalyst 9800 Series Wireless Controller WebUI enhancements - Phase 2
PassedTo checkweather the APDashlets chartview changesare working ornot in CiscoCatalyst 9800Series WirelessControllerJapaneseUI
AP Dashlets inChart view inUI
EWCJ171S_EWC_UI_Enhancement_12
PassedTo checkweather mDNScan be configurein Servicetemplate page inCisco Catalyst9800 SeriesWirelessController inJapanese UI
mDNS supportin Servicetemplate pagein UI
EWCJ171S_EWC_UI_Enhancement_13
PassedTo checkweather mDNScan be configurein Guest Lanpage in CiscoCatalyst 9800Series WirelessController inJapanese UI
mDNS supportin Guest LANpage
EWCJ171S_EWC_UI_Enhancement_14
PassedTo checkweather mDNScan be configurein RLAN pagein Cisco Catalyst9800 SeriesWirelessController inJapanese UI
mDNS supportin RLAN page
EWCJ171S_EWC_UI_Enhancement_15
CSCvs50296FailedTo checkweather mDNScan be configurein VLAN pagein Cisco Catalyst9800 SeriesWirelessController inJapanese UI
mDNS ServicePolicyConfigurationon VLANinterface
EWCJ171S_EWC_UI_Enhancement_16
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )41
New FeaturesCisco Catalyst 9800 Series Wireless Controller WebUI enhancements - Phase 2
PassedTo checkweather mDNScan be configurein AP page inCisco Catalyst9800 SeriesWirelessController inJapanese UI
mDNSConfigurationin AP page
EWCJ171S_EWC_UI_Enhancement_17
PassedTo checkweather LANPort Setting aredisplaying or notin AP Interfacetab in CiscoCatalyst 9800Series WirelessControllerJapanese UI
Duplo APSupport
EWCJ171S_EWC_UI_Enhancement_18
PassedTo checkweatherUmbrellaintegrationsupport isapplying indevice or not inin Cisco Catalyst9800 SeriesWirelessControllerJapanese UI
Cisco Catalyst9800 SeriesWirelessController Flex& ME shouldnativelysupportUmbrellaintegration
EWCJ171S_EWC_UI_Enhancement_19
PassedTo checkweather iPSKPeer-2-PeerBlockingconfiguration isapplied inprofile policy inCisco Catalyst9800 SeriesWirelessController inJapanese UI
iPSKPeer-2-PeerBlocking
EWCJ171S_EWC_UI_Enhancement_20
DNAC Support for EWCDefect IDStatusDescriptionTitleLogical ID
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )42
New FeaturesDNAC Support for EWC
PassedTo verify whetherthe device detailsare showing ininventory afteradded in ciscoDNA
Verifying devicedetails in inventoryafteradded/discovered incisco DNA
EWCJ171S_EWC_DNAcsupport_1
PassedVerifying whetheradded devicesproperly assured ormonitoring in ciscoDNA
Monitoring thedevices after addingin cisco DNA andverifying same ineWC
EWCJ171S_EWC_DNAcsupport_2
PassedChecking whethercount of wirelessdevices are addedin Cisco DNA andthey are monitoredproperly or not
Discoveringmultiple devices incisco DNA andcheck for the samecount in monitoreddevices
EWCJ171S_EWC_DNAcsupport_3
PassedTo verify whetherall AP's detailsshowing ininventory afterdevice discovered
Checking APdevices ininventory afterWireless controllerdiscovered in ciscoDNA
EWCJ171S_EWC_DNAcsupport_4
PassedTo verify AP'scount in Assurancedashboard afteradded in inventory
Checking the AP'scount in networkhealth aftersuccessfully addedin inventory
EWCJ171S_EWC_DNAcsupport_5
PassedTo verify newlyaddedAP's count incisco DNA afterresync
Resync the ciscoDNA and checkingfor the newly addedAP's count indevice
EWCJ171S_EWC_DNAcsupport_6
PassedTo verify whetheruser able to exportthe deviceinventory details ornot
Exporting theinventory detailsfrom cisco DNA
EWCJ171S_EWC_DNAcsupport_7
PassedTo verify whetheruser able to importthe deviceinventory details ornot
Importing theinventory details todevice fromcomputer in ciscoDNA
EWCJ171S_EWC_DNAcsupport_8
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )43
New FeaturesDNAC Support for EWC
PassedTo check the outputfor devicecommands after runin command runnerin cisco DNA
Running thecommands in ciscoDNA usingcommand runner
EWCJ171S_EWC_DNAcsupport_9
PassedTo check whetheruser able to deletethe device frominventory or not
Deleting the devicefrom inventory incisco DNA
EWCJ171S_EWC_DNAcsupport_10
PassedTo check whetherreachability statuschange to"unreachable" ornot when device isdown
Checking thedevice reachabilitystatus in inventoryafter make thedevice down
EWCJ171S_EWC_DNAcsupport_11
PassedTo check whetheruser able to createsite and provisiondevice
Adding site andprovisioning device
EWCJ171S_EWC_DNAcsupport_12
PassedTo check AP'spositioning afterpositioned withdifferent radios
Positioning AP's onsite with differentradios
EWCJ171S_EWC_DNAcsupport_13
PassedTo verify whetherME WC deviceshowing as AP ornot in inventory
Checking forinternal AP detailsafter device addeddiscover
EWCJ171S_EWC_DNAcsupport_14
PassedTo verify the clientdetails in clientHealth afterconnected to AP
Connecting theclients to AP's andchecking the clientcount in Dashboard
EWCJ171S_EWC_DNAcsupport_15
PassedVerify that user isable to ProvisionedtheMEWC in day0via PnP profile ornot
Provisioning theME _WC in day0via PnP profile andbring device day1
EWCJ171S_EWC_DNAcsupport_16
CMX Parity for Cisco Catalyst 9800 Series Wireless ControllerME
Defect IDStatusDescriptionTitleLogical ID
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )44
New FeaturesCMX Parity for Cisco Catalyst 9800 Series Wireless Controller ME
PassedTo Check Whetherthe Cisco Catalyst9800 SeriesWireless Controller-ME gets added toCMX & CMXadded to DNACsuccessfully or not
Adding eWC-MEtoCMX&CMX toDNAC
EWCJ171S_EWC_CMX_01
PassedTo connect a IOSClient to the accesspoint on the floorand check if thedetails of the IOSClients are showncorrectly or not.
Connecting theIOS Client to theaccess point on thefloor and check thedetails of theClient.
EWCJ171S_EWC_CMX_02
PassedTo connect aMacOS Client tothe access point onthe floor and checkif the details of theMacOS Clients areshown correctly ornot.
Connecting theMacOS Client tothe access point onthe floor and checkthe details of theClient.
EWCJ171S_EWC_CMX_03
PassedTo connect aAndroid Client tothe access point onthe floor and checkif the details of theIOS Clients areshown correctly ornot.
Connecting theAndroid Client tothe access point onthe floor and checkthe details of theClient.
EWCJ171S_EWC_CMX_04
PassedTo connect manyClient fromdifferent place tothe access pointsand check if thelocation of theClient are shown inCMX
Connecting manyClients fromdifferent place andcheck the locationof the Clients
EWCJ171S_EWC_CMX_05
PassedTo connect a 2.4ghz Client to theaccess point on thefloor and check ifthe details of theClients are showncorrectly or not.
Connecting a 2.4ghz Client to theaccess point whichis placed in floorand checking theclient details
EWCJ171S_EWC_CMX_06
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )45
New FeaturesCMX Parity for Cisco Catalyst 9800 Series Wireless Controller ME
PassedTo connect a 5 ghzClient to the accesspoint on the floorand check if thedetails of theClients are showncorrectly or not.
Connecting a 5 ghzClient to the accesspoint which isplaced in floor andchecking the clientdetails
EWCJ171S_EWC_CMX_07
PassedTo connect a Dualband Client to theaccess point on thefloor and check ifthe details of theClients are showncorrectly or not.
Connecting a Dualband Client to theaccess point whichis placed in floorand checking theclient details
EWCJ171S_EWC_CMX_08
PassedTo check whetherthe client isdisconnected or notin CMX
Verify theDisconnectedclient details inCMX
EWCJ171S_EWC_CMX_09
PassedTo verify whetherthe client isroaming betweenAP's or not
Verifying the Intraclient roaming inCMX
EWCJ171S_EWC_CMX_10
PassedTo verify whetherthe clients areroaming betweencontrollers
Verifying the Interclient roaming inCMX
EWCJ171S_EWC_CMX_11
PassedTo Check whetherthe Wired clientdetails are showingor not in CMX
Verifying theWired client detailsin CMX
EWCJ171S_EWC_CMX_12
PassedTo Check whetherthe Guest LANclient details areshowing or not inCMX
Verifying the guestLAN client detailsin CMX
EWCJ171S_EWC_CMX_13
PassedTo check Whetherall the clientsgetting same BW& data rate or not
Verifying MIMOclient details usingWireshark
EWCJ171S_EWC_CMX_14
Browser renderingDefect IDStatusDescriptionTitleLogical ID
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )46
New FeaturesBrowser rendering
PassedTo Capture thewarning andsevere consolelogs in DashboardPage
Capture theConsole logsDashboardPage
EWCJ171S_EWC_Browser_rendering_1
PassedTo Capture thewarning andsevere consolelogs inMonitoring Page
Capture theConsole logsonMonitoringPage
EWCJ171S_EWC_Browser_rendering_2
PassedTo Capture thewarning andsevere consolelogs inConfigurationPage
Capture theConsole logsConfigurationPage
EWCJ171S_EWC_Browser_rendering_3
PassedTo check weatherany JS failures orerrors are their intheAdministrationpage in CiscoCatalyst 9800Series WirelessControllerJapanese UI
Capture theConsole logsAdministrationPage
EWCJ171S_EWC_Browser_rendering_4
PassedTo check weatherany JS failures orerrors are their intheTroubleshootingpage in CiscoCatalyst 9800Series WirelessControllerJapanese UI
Capture theConsole logsonTroubleshootingPage
EWCJ171S_EWC_Browser_rendering_5
PassedTo Capture thewarning andsevere consolelogs in DashboardPage
Capture theConsole logsDashboardPage
EWLCJ171S_ChromeRendring_01
PassedTo Capture thewarning andsevere consolelogs in DashboardAps link
Capture theConsole logsDashboardAP link
EWLCJ171S_ChromeRendring_02
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )47
New FeaturesBrowser rendering
PassedTo Capture thewarning andsevere consolelogs in DashboardWLAN link
Capture theConsole logsDashboardWLAN link
EWLCJ171S_ChromeRendring_03
PassedTo Capture thewarning andsevere consolelogs in DashboardClients link
Capture theConsole logsDashboardClients link
EWLCJ171S_ChromeRendring_04
PassedTo Capture thewarning andsevere consolelogs inMonitoring Page
Capture theConsole logsonMonitoringPage
EWLCJ171S_ChromeRendring_05
PassedTo Capture thewarning andsevere consolelogs inMonitoring ->General Page
Capture theConsole logsonMonitoring ->General Subpages Page
EWLCJ171S_ChromeRendring_06
PassedTo Capture thewarning andsevere consolelogs inMonitoring ->Security subPages
Capture theConsole logsonMonitoring ->Security Subpages Page
EWLCJ171S_ChromeRendring_07
PassedTo Capture thewarning andsevere consolelogs inMonitoring ->Services subPages
Capture theConsole logsonMonitoring ->Services Subpages Page
EWLCJ171S_ChromeRendring_08
PassedTo Capture thewarning andsevere consolelogs inMonitoring ->Wireless subPages
Capture theConsole logsonMonitoring ->Wireless Subpages
EWLCJ171S_ChromeRendring_09
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )48
New FeaturesBrowser rendering
PassedTo Capture thewarning andsevere consolelogs inConfigurationPage
Capture theConsole logsConfigurationPage
EWLCJ171S_ChromeRendring_10
PassedTo Capture thewarning andsevere consolelogs inConfiguration ->Interface subPages
Capture theConsole logsConfiguration- >Interfacesub Pages
EWLCJ171S_ChromeRendring_11
PassedTo Capture thewarning andsevere consolelogs inConfiguration->Layer 2 Page
Capture theConsole logsConfiguration- >Layer2 subPages
EWLCJ171S_ChromeRendring_12
PassedTo Capture thewarning andsevere consolelogs inConfigurationPage
Capture theConsole logsConfiguration- >Interfacesub Pages
EWLCJ171S_ChromeRendring_13
PassedTo Capture thewarning andsevere consolelogs inConfiguration->RadioConfigurationsPage
Capture theConsole logsConfiguration- >RadioConfigurationssub Pages
EWLCJ171S_ChromeRendring_14
PassedTo Capture thewarning andsevere consolelogs inConfiguration ->Routing protocolsPage
Capture theConsole logsConfiguration- >Routingprotocols subPages
EWLCJ171S_ChromeRendring_15
PassedTo Capture thewarning andsevere consolelogs inConfiguration->SecurityPage
Capture theConsole logsConfiguration- >Securitysub Pages
EWLCJ171S_ChromeRendring_16
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )49
New FeaturesBrowser rendering
PassedTo Capture thewarning andsevere consolelogs inConfiguration->Services Page
Capture theConsole logsConfiguration- >Servicessub Pages
EWLCJ171S_ChromeRendring_17
PassedTo Capture thewarning andsevere consolelogs inConfiguration ->Tags & ProfilesPage
Capture theConsole logsConfiguration- > Tags &Profiles subPages
EWLCJ171S_ChromeRendring_18
PassedTo Capture thewarning andsevere consolelogs inConfiguration ->Wireless Page
Capture theConsole logsConfiguration- > Wirelesssub Pages
EWLCJ171S_ChromeRendring_19
PassedTo Capture thewarning andsevere consolelogs inConfiguration ->Wireless Page
Capture theConsole logsConfiguration- > WirelessSetup subPages
EWLCJ171S_ChromeRendring_20
PassedTo Capture thewarning andsevere consolelogs inAdministrationPage
Capture theConsole logsAdministrationPage
EWLCJ171S_ChromeRendring_21
PassedTo Capture thewarning andsevere consolelogs inAdministration ->Best PracticesPage
Capture theConsole logsAdministration-> BestPracticesPage
EWLCJ171S_ChromeRendring_22
PassedTo Capture thewarning andsevere consolelogs inAdministration ->Command lineinterface Page
Capture theConsole logsAdministration-> Commandline interfacePage
EWLCJ171S_ChromeRendring_23
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )50
New FeaturesBrowser rendering
PassedTo Capture thewarning andsevere consolelogs inAdministration->Device Page
Capture theConsole logsAdministration-> DevicePage
EWLCJ171S_ChromeRendring_24
PassedTo Capture thewarning andsevere consolelogs inAdministration ->DHCPPools Page
Capture theConsole logsAdministration-> DHCPPools Page
EWLCJ171S_ChromeRendring_25
PassedTo Capture thewarning andsevere consolelogs inAdministration ->DNS Page
Capture theConsole logsAdministration-> DNS Page
EWLCJ171S_ChromeRendring_26
PassedTo Capture thewarning andsevere consolelogs inAdministration ->Licensing Page
Capture theConsole logsAdministration-> LicensingPage
EWLCJ171S_ChromeRendring_27
PassedTo Capture thewarning andsevere consolelogs inAdministration ->Management Page
Capture theConsole logsAdministration->ManagementPage
EWLCJ171S_ChromeRendring_28
PassedTo Capture thewarning andsevere consolelogs inAdministration ->Reload Page
Capture theConsole logsAdministration-> ReloadPage
EWLCJ171S_ChromeRendring_29
PassedTo Capture thewarning andsevere consolelogs inAdministration->Smart callHome Page
Capture theConsole logsAdministration-> Smart callHome Page
EWLCJ171S_ChromeRendring_30
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )51
New FeaturesBrowser rendering
PassedTo Capture thewarning andsevere consolelogs inAdministration ->Softwaremanagement Page
Capture theConsole logsAdministration-> SoftwareManagementPage
EWLCJ171S_ChromeRendring_31
PassedTo Capture thewarning andsevere consolelogs inAdministration ->Time Page
Capture theConsole logsAdministration-> Time Page
EWLCJ171S_ChromeRendring_32
PassedTo Capture thewarning andsevere consolelogs inAdministration->UserAdministrationPage
Capture theConsole logsAdministration->UserAdministrationPage
EWLCJ171S_ChromeRendring_33
PassedTo Capture thewarning andsevere consolelogs inTroubleshootingPage
Capture theConsole logsonTroubleshootingPage
EWLCJ171S_ChromeRendring_34
PassedTo Capture thewarning andsevere consolelogs inTroubleshooting->Logs Page
Capture theConsole logsonTroubleshooting-> Logs Page
EWLCJ171S_ChromeRendring_35
PassedTo Capture thewarning andsevere consolelogs inTroubleshooting->Core dump andSystem reportPage
Capture theConsole logsonTroubleshooting-> CoreDump andSystem reportPage
EWLCJ171S_ChromeRendring_36
PassedTo Capture thewarning andsevere consolelogs inTroubleshooting-> Debug bundlePage
Capture theConsole logsonTroubleshooting->Debugbundle Page
EWLCJ171S_ChromeRendring_37
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )52
New FeaturesBrowser rendering
PassedTo Capture thewarning andsevere consolelogs inTroubleshooting->packetcapture Page
Capture theConsole logsonTroubleshooting-> Packetcapture Page
EWLCJ171S_ChromeRendring_38
PassedTo Capture thewarning andsevere consolelogs inTroubleshooting-> Ping and traceroute Page
Capture theConsole logsonTroubleshooting-> Ping andtrace routePage
EWLCJ171S_ChromeRendring_39
PassedTo Capture thewarning andsevere consolelogs inTroubleshooting->Ap packetcapture Page
Capture theConsole logsonTroubleshooting->Ap Packetcapture Page
EWLCJ171S_ChromeRendring_40
PassedTo Capture thewarning andsevere consolelogs inTroubleshooting->radio activetrace packetcapture Page
Capture theConsole logsonTroubleshooting->Ap Radioactive tracePage
EWLCJ171S_ChromeRendring_41
EWC Crashes(DHCP/Troubleshootings)Defect IDStatusDescriptionTitleLogical ID
PassedTo verify whetherinvalid IPaccepting inDHCPpool or not andeWC not crashing
Creating theDHCPscope form CLIwith invalid IPaddress andobserve crashwhile configuring
EWCJ171S_EWC_Crash_1
PassedTo verify whetherDHCP poolmapped tointerface or not andeWC not crashing
Mapping theDHCP pool tointerface andobserve crashwhile configuring
EWCJ171S_EWC_Crash_2
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )53
New FeaturesEWC Crashes(DHCP/Troubleshootings)
PassedTo verify whethereWC going toCrash or not afterchanging the RRMdetails
Changing theRRMdetails after clientconnected toWLAN
EWCJ171S_EWC_Crash_3
PassedTo verify whethermore than 10DHCP pools arecreated and eWCnot crashing
Creatingmore than10 DHCP pool ineWCwith JapaneseUI
EWCJ171S_EWC_Crash_4
PassedTo verify whetherControllerConfigurations areclearing or not
Clearing the eWCConfigurations
EWCJ171S_EWC_Crash_5
PassedTo verify whetherControllerConfigurations areBackup & Restoreor not and eWCnotcrashing
Backup & Restorethe eWCConfigurations
EWCJ171S_EWC_Crash_6
CSCvs43415FailedTo verify whetherAP can beconverted to neweWC or notwithout crash
Convert theCAPWAP to eWC
EWCJ171S_EWC_Crash_7
PassedTo verify whetherDNS IP addressfield accepting theInvalid IP addressor not and eWCnotcrashing
Invalid DNS serverIP addressconfiguration
EWCJ171S_EWC_Crash_8
PassedTo verify whetherping response isgetting withoutpacket drop andeWC not crashing
Checking the pingresponse
EWCJ171S_EWC_Crash_9
PassedTo verify whethertraceroute responseis getting withactual hop countand eWC notcrashing
Checking thetraceroute response
EWCJ171S_EWC_Crash_10
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )54
New FeaturesEWC Crashes(DHCP/Troubleshootings)
EWC Day0 EliminationDefect IDStatusDescriptionTitleLogical ID
PassedVerify that user isable to Provisionedthe Cisco Catalyst9800 SeriesWirelessController_ME inday0 via PnPprofile or not
Provisioning theCisco Catalyst9800 SeriesWirelessController_ME inday0 via PnPprofile
EWCJ171S_EWC_Day0_01
PassedVerify that user isable to Provisionedthe Cisco Catalyst9800 SeriesWirelessController_ME inday0 after addingPnp Detailsmanually
Manually addingsingle device Pnpdetails andProvisioning the9115AX CiscoCatalyst 9800Series WirelessController_ME inday0
EWCJ171S_EWC_Day0_02
PassedVerify that user isable to Provisionedthe 1815CiscoCatalyst 9800Series WirelessController_ME inday0 after addingPnp Details withimporting .csv file
Adding the devicedetails in PnP withimporting the .csvfile in Bulk devicesoption
EWCJ171S_EWC_Day0_03
PassedVerifying theimage version afterProvisioning CiscoCatalyst 9800Series WirelessController_MEwith PnP
Checking theimage version afterProvisioning CiscoCatalyst 9800Series WirelessController_MEwith PnP
EWCJ171S_EWC_Day0_04
PassedVerifying the APdetails afterProvisioningCiscoCatalyst 9800Series WirelessController_MEwith PnP
Checking the APdetails afterProvisioning CiscoCatalyst 9800Series WirelessController_MEwith PnP
EWCJ171S_EWC_Day0_05
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )55
New FeaturesEWC Day0 Elimination
PassedTo verify whetherWLANs arebroadcasting or notafter provisioning
Checking WLANsbroadcasting or notafter provisioning
EWCJ171S_EWC_Day0_06
PassedVerifying the clientdetails afterconnectingWLAN
Connecting clientto created WLANand checking theclient details
EWCJ171S_EWC_Day0_07
PassedTo verify whetheruser is able toProvisionedtheCisco Catalyst9800 SeriesWirelessController_MEwith providingwrongDNAC IP inSwitch
Configuring wrongDNAC IP addressin switch andtrying for theprovisioning
EWCJ171S_EWC_Day0_08
PassedTo verify whetheruser is able toProvisioned theCisco Catalyst9800 SeriesWirelessController_MEwith providingwrong PnPconfiguration inDNAC
Configuring wrongdetails for PnPwhile claiming thedevice
EWCJ171S_EWC_Day0_09
PassedVerifying whetheruser able to bringdevice to day0 ornot with saveconfig as yes
Checking the CiscoCatalyst 9800Series WirelessController_MEafter configuringfactory reset withsave config
EWCJ171S_EWC_Day0_10
ISSUDefect IDStatusDescriptionTitleLogical ID
PassedTo check whetherthe upgradation isperformed or not viaftp
PerformingUpgradation usingISSU
EWLCJ171S_ISSU_01
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )56
New FeaturesISSU
PassedTo check whetherthe rollbackhappening forController image ornot.
PerformingRollback forcontroller usingISSU.
EWLCJ171S_ISSU_02
PassedTo check that therollback doesn'thappen forController image ornot.
Disabling theRollback timerduring upgradingcontroller usingISSU.
EWLCJ171S_ISSU_03
PassedTo check whetherthe upgradation forController image isaborted or not.
Aborting theupgradation ofController usingISSU.
EWLCJ171S_ISSU_04
PassedTo check whetherthe ControllerUpgradation via tftpis happening or not.
PerformingUpgradation forcontroller usingISSU via tftp server.
EWLCJ171S_ISSU_05
PassedTo check whetherthe ControllerUpgradation via sftpis happening or not.
PerformingUpgradation forController usingISSU via sftpserver.
EWLCJ171S_ISSU_06
PassedTo check whetherthe ControllerUpgradation via httpis happening or not.
PerformingUpgradation forcontroller usingISSU via httpserver.
EWLCJ171S_ISSU_07
PassedTo check whetherthe clientcontinuouslyconnecting duringthe upgrade of AP
Checking the clientconnectivity
EWLCJ171S_ISSU_08
DNA AssuranceDefect IDStatusDescriptionTitleLogical ID
PassedTo verify whetherthe device detailsare showing ininventory afteradded in ciscoDNA
Verifying devicedetails in inventoryafteradded/discovered incisco DNA
EWLCJ171S_DNA_A_01
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )57
New FeaturesDNA Assurance
PassedVerifying whetherthe Performance ofAPs are monitoredcorrectly as per inthe controller or notin Cisco DNA
Checking thePerformance ofAPs in Cisco DNA
EWLCJ171S_DNA_A_02
PassedChecking whethercount of wirelessdevices are addedin Cisco DNA andthey are monitoredproperly or not
Verifying numberof wireless devicesare added in CiscoDNA
EWLCJ171S_DNA_A_03
PassedVerifying whetherall the clients aremonitored or notaccording to theirhigh interface alongwith the APs
Monitoring towhich AP clientsare connected andtheir signal strength
EWLCJ171S_DNA_A_04
PassedVerifying whetherthe Client status aremonitored correctlyas per in thecontroller or not inCisco DNA
Checking the Clientconnectivity statusin Cisco DNA
EWLCJ171S_DNA_A_05
PassedVerifying whetherthe Client Onboarding Times aremonitored correctlyas per in thecontroller or not inCisco DNA
Checking the ClientOn boarding Timesin Cisco DNA
EWLCJ171S_DNA_A_06
PassedVerifying whetherthe Client Countper SSID aremonitored correctlyas per in thecontroller or not inCisco DNA
Checking the ClientCount per SSID inCisco DNA
EWLCJ171S_DNA_A_07
PassedVerifying whetherthe Client Countper Band aremonitored correctlyas per in thecontroller or not inCisco DNA
Checking the ClientCount per Band inCisco DNA
EWLCJ171S_DNA_A_08
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )58
New FeaturesDNA Assurance
PassedVerifying whetherthe RSSI & SNRare monitoredcorrectly as per inthe controller or notin Cisco DNA
Checking the ClientRSSI & SNRvalues in CiscoDNA
EWLCJ171S_DNA_A_09
PassedVerifying the IPAddressing, DNS,Host Reachability& RADIUS Testsin Sensor - DrivenTest
PerformingNetwork Test inSensor - DrivenTest
EWLCJ171S_DNA_A_10
PassedMonitoring the IPAddressing, DNS,Host Reachability& RADIUS Testsin Wireless SensorDashboard
Capturing theNetwork Test fromWireless SensorDashboard
EWLCJ171S_DNA_A_11
PassedVerifying the SpeedTest & ISPLA Testin Sensor - DrivenTest
PerformingPerformance Testin Sensor - DrivenTest
EWLCJ171S_DNA_A_12
PassedMonitoring theSpeed Test &ISPLA Test inWireless SensorDashboard
Capturing thePerformance Testfrom WirelessSensor Dashboard
EWLCJ171S_DNA_A_13
PassedVerifying the EmailTest, Web Test &File Transfer Testin Sensor - DrivenTest
PerformingApplication Test inSensor - DrivenTest
EWLCJ171S_DNA_A_14
PassedMonitoring theEmail Test, WebTest & FileTransfer Test inWireless SensorDashboard
Capturing theApplication Testfrom WirelessSensor Dashboard
EWLCJ171S_DNA_A_15
PassedChecking whetherthe Scheduling Onboarding Packetcapture is done asper the schedule ornot
PerformingScheduling Onboarding PacketCapture Test
EWLCJ171S_DNA_A_16
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )59
New FeaturesDNA Assurance
PassedTesting whether theuser able to captureor not theConfigured APsusingAuto-CaptureSettings
CapturingConfigured APsusingAuto-CaptureSettings
EWLCJ171S_DNA_A_17
PassedTo capture thePacket of the clientwhen the client isconnected to APwith radio as 2.4GHz
Packet capture ofclient when theclient is connectedto APwith 2.4 GHz
EWLCJ171S_DNA_A_18
PassedTo capture thePacket of the clientwhen the client isconnected to APwith radio as 5 GHz
Packet capture ofclient when theclient is connectedto AP with 5 GHz
EWLCJ171S_DNA_A_19
PassedTo capture packetwhen the client isconnected to theAP with security asWPA 2 PSK
Capturing of Packetof the client whenthe client isconnected withWPA 2 PSKsecurity
EWLCJ171S_DNA_A_20
PassedTo capture packetwhen the client isconnected to theAP with security asWPA 2 802.1x
Capturing of Packetof the client whenthe client isconnected withWPA 2 802.1xsecurity
EWLCJ171S_DNA_A_21
PassedTo verify if thepacket capturehappens when theAP is inFlexconnect Localswitching modewith a clientconnected to it
Verifying thepacket capturewhen the AP is inFlexconnect Localswitching
EWLCJ171S_DNA_A_22
PassedTo verify if thepacket capturehappens when theAP is inFlexconnect Localswitchingmode andlocal authenticationwith a clientconnected to it
Verifying thepacket capturewhen the AP is inFlexconnect Localswitching withlocal authentication
EWLCJ171S_DNA_A_23
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )60
New FeaturesDNA Assurance
PassedTo check whetherintra controllerroaming of clientsworks properly ornot and check ifpacket captureworks properly ornot
Performing Intracontroller roamingof client andcapturing of packetusing Intelligentcapture
EWLCJ171S_DNA_A_24
PassedTo check whetherinter controllerroaming ofAndroidclients worksproperly or not
Performing Intercontroller roamingof client andcapturing thepacket
EWLCJ171S_DNA_A_25
PassedTo capture Packetfor the WGB basedclient and check ifpacket capture forWGB based clientis shown
Packet capture forthe WGB basedclient usingIntelligent Capture
EWLCJ171S_DNA_A_26
PassedTo verify thepacket capture forAnyconnect clientusing Intelligentcapture in AP page
Packet capture forAnyconnect clientusing IntelligentCapture option inAP page
EWLCJ171S_DNA_A_27
PassedTo verify thepacket capture forWindows JOSclient usingIntelligent capturein AP page
Packet capture forWindows JOSclient usingIntelligent Captureoption in AP page
EWLCJ171S_DNA_A_28
PassedTo verify thepacket capture forAndroid clientusing Intelligentcapture in AP page
Packet capture forAndroid clientusing IntelligentCapture option inAP page
EWLCJ171S_DNA_A_29
PassedTo verify thepacket capture foriOS client usingIntelligent capturein AP page
Packet capture foriOS client usingIntelligent Captureoption in AP page
EWLCJ171S_DNA_A_30
PassedTo verify thepacket capture forMacOS client usingIntelligent capturein AP page
Packet capture forMacOS client usingIntelligent Captureoption in AP page
EWLCJ171S_DNA_A_31
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )61
New FeaturesDNA Assurance
PassedTo capture packetwhen the client isconnected to theAP with security asOPEN
Capturing of Packetof the client whenthe client isconnected withopen security
EWLCJ171S_DNA_A_32
Catalyst 9800 Crashes(DHCP/Troubleshootings)Defect IDStatusDescriptionTitleLogical ID
PassedTo verify whetherinvalid IPaccepting inDHCP pool or notand Cisco Catalyst9800 SeriesWirelessController notcrashing
Creating theDHCP scope formCLI with invalidIP address andobserve crashwhile configuring
EWLCJ171S_EWLC_Crash_01
CSCvs78121FailedTo verify whetherDHCP poolmapped tointerface or notand Cisco Catalyst9800 SeriesWirelessController notcrashing
Mapping theDHCP pool tointerface andobserve crashwhile configuring
EWLCJ171S_EWLC_Crash_02
PassedTo verify whetherCisco Catalyst9800 SeriesWirelessController going toCrash or not afterchanging the RRMdetails
Changing theRRM details afterclient connected toWLAN
EWLCJ171S_EWLC_Crash_03
PassedTo verify whethermore than 10DHCP pools arecreated and CiscoCatalyst 9800Series WirelessController notcrashing
Creatingmore than10 DHCP poolinCisco Catalyst9800 SeriesWirelessController withJapanese UI
EWLCJ171S_EWLC_Crash_04
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )62
New FeaturesCatalyst 9800 Crashes(DHCP/Troubleshootings)
PassedTo verify whetherControllerConfigurations areclearing or not
Clearing the CiscoCatalyst 9800Series WirelessControllerConfigurations
EWLCJ171S_EWLC_Crash_05
PassedTo verify whetherControllerConfigurations areBackup & Restoreor not and CiscoCatalyst 9800Series WirelessController notcrashing
Backup & Restorethe Cisco Catalyst9800 SeriesWirelessControllerConfigurations
EWLCJ171S_EWLC_Crash_06
PassedTo verify whetherAP can beconverted to newCisco Catalyst9800 SeriesWirelessController or notwithout crash
Convert theCAPWAP toCiscoCatalyst 9800Series WirelessController
EWLCJ171S_EWLC_Crash_07
PassedTo verify whetherDNS IP addressfield accepting theInvalid IP addressor not and CiscoCatalyst 9800Series WirelessController notcrashing
Invalid DNSserver IP addressconfiguration
EWLCJ171S_EWLC_Crash_08
PassedTo verify whetherping response isgetting withoutpacket drop andCisco Catalyst9800 SeriesWirelessController notcrashing
Checking the pingresponse
EWLCJ171S_EWLC_Crash_09
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )63
New FeaturesCatalyst 9800 Crashes(DHCP/Troubleshootings)
PassedTo verify whethertracerouteresponse is gettingwith actual hopcount and CiscoCatalyst 9800Series WirelessController notcrashing
Checking thetracerouteresponse
EWLCJ171S_EWLC_Crash_10
mDNS Support for Wired Guest AcDefect IDStatusDescriptionTitleLogical ID
PassedVerify able tocreate the GuestLan with mDNSMode Bridgingwith Apple TV
Create the GuestLan with mDNSMode BridgingGateway andVerify with AppleTV
EWLCJ171S_mDNS_WGA_01
PassedVerify able tocreate the GuestLan with mDNSMode Bridging.
Create the GuestLan with mDNSMode Bridging.
EWLCJ171S_mDNS_WGA_02
PassedVerify able to editthe Guest LanwithmDNS ModeBridging.
Edit the Guest Lanwith mDNS ModeBridging.
EWLCJ171S_mDNS_WGA_03
PassedVerify able toDelete the GuestLan with mDNSMode Bridging.
Delete the GuestLan with mDNSMode Bridging.
EWLCJ171S_mDNS_WGA_04
PassedVerify able tocreate with theGuest Lan withmDNS ModeBridging.
Create the GuestLan with mDNSMode Bridgingwith Guest LANMapConfiguration.
EWLCJ171S_mDNS_WGA_05
PassedVerify able toDelete with theGuest Lan withmDNS ModeBridging.
Delete the GuestLan with mDNSMode Bridgingwith Guest LANMapConfiguration.
EWLCJ171S_mDNS_WGA_06
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )64
New FeaturesmDNS Support for Wired Guest Ac
PassedVerify able toCreate the GuestLan with mDNSMode BridgingGateway: .
Create the GuestLan with mDNSMode Gateway: .
EWLCJ171S_mDNS_WGA_07
Passedverify able toCreate the GuestLan with mDNSMode Drop.
Create the GuestLan with mDNSMode BridgingDrop.
EWLCJ171S_mDNS_WGA_08
NAT Support for Mobility TunnelDefect IDStatusDescriptionTitleLogical ID
PassedTo Verify theroaming scenarioand NAT withWindows client.
Perform theroaming scenarioand NAT withWindows client.
EWLCJ171S_NAT_MT_01
PassedTo Verify theroaming scenarioand NAT withMAC client.
Perform theroaming scenarioand NAT withMAC client.
EWLCJ171S_NAT_MT_02
PassedTo Verify theroaming scenarioand NAT withAndroid client.
Perform theroaming scenarioand NAT withAndroid client.
EWLCJ171S_NAT_MT_03
PassedTo Verify theroaming scenarioand NAT withApple client.
Perform theroaming scenarioand NAT withApple client.
EWLCJ171S_NAT_MT_04
Open DNSDefect IDStatusDescriptionTitleLogical ID
PassedTo Verify whetherthe Cisco Catalyst9800 SeriesWireless Controllerregistered in openDNS and CiscoCatalyst 9800Series WirelessController got thedevice ID or not
Verifying CiscoCatalyst 9800Series WirelessControllerregistered withopen DNS server
EWLCJ171S_OpenDNS_01
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )65
New FeaturesNAT Support for Mobility Tunnel
PassedTo Verify whetherthe profile mappedwith Cisco Catalyst9800 SeriesWireless Controllerand reflected inCisco Catalyst9800 SeriesWireless ControllerGUI & CLI or not
Verifying thecreated profilemappedwith CiscoCatalyst 9800Series WirelessController GUI andCLI
EWLCJ171S_OpenDNS_02
PassedTo verify whetherthe WLAN createdwith open DNSconfiguration ornot
Verifying theWLAN createdwith open DNSconfiguration
EWLCJ171S_OpenDNS_03
PassedTo Verify whetherthe open DNSconfigured or notwhen WindowsJOS connected toUmbrella enabledWLAN Profile
Verifying the openDNS configurationfor the connectedWindows Client inCisco Catalyst9800 SeriesWireless ControllerUI/CLI
EWLCJ171S_OpenDNS_04
PassedTo Verify whetherthe open DNSconfigured or notwhen MAC OSconnected toUmbrella enabledWLAN Profile
Verifying the openDNS configurationfor the connectedMAC OS Client inCisco Catalyst9800 SeriesWireless ControllerUI/CLI
EWLCJ171S_OpenDNS_05
PassedTo Verify whetherthe open DNSconfigured or notwhen iOS clientconnected toUmbrella enabledWLAN Profile
Verifying the openDNS configurationfor the connectediOS Client in CiscoCatalyst 9800Series WirelessController UI/CLI
EWLCJ171S_OpenDNS_06
PassedTo Verify whetherthe open DNSconfigured or notwhen Androidclient connected toUmbrella enabledWLAN Profile
Verifying the openDNS configurationfor the connectedAndroid Client inCisco Catalyst9800 SeriesWireless ControllerUI/CLI
EWLCJ171S_OpenDNS_07
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )66
New FeaturesOpen DNS
PassedTo verify whetherthe data plate statsis cleared or not
clear the data planestats in open DNSconfiguration
EWLCJ171S_OpenDNS_08
PassedTo verify the openDNs configurationafter client roamingbetween 9115 &9120 Aps
Perform theroaming between9115 & 9120 Aps
EWLCJ171S_OpenDNS_09
PassedTo verify the opendns after Interroaming
Perform theroaming betweentwo Cisco Catalyst9800 SeriesWireless Controller
EWLCJ171S_OpenDNS_10
RSSI and SNR in ASSOC requestDefect IDStatusDescriptionTitleLogical ID
PassedTo verify SNR andRSS values inDNA centre afterconnecting client
Adding CiscoCatalyst 9800Series WirelessController toDNAC andconnecting clients
EWLCJ171S_RSSI_SNR_01
PassedTo verify SNR andRSS connectivityin DNAcentre withAP modeflexconnect andauthentication asopen
Connecting clientto AP flex connectmode,authentication asopen and verifyingSNR and RSSdetails
EWLCJ171S_RSSI_SNR_02
PassedTo verify SNR andRSS connectivityin DNAcentre withAP modeflexconnect andauthentication asPSK
Connecting clientto AP flex connectmode,authentication asPSK and verifyingSNR and RSSdetails
EWLCJ171S_RSSI_SNR_03
PassedTo verify SNR andRSS connectivityin DNAcentre withAP modeflexconnect andauthentication asdot11
Connecting clientto AP flex connectmode,authentication asdot11 andverifying SNR andRSS details
EWLCJ171S_RSSI_SNR_04
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )67
New FeaturesRSSI and SNR in ASSOC request
PassedTo verify SNR andRSS connectivityin DNAcentre withAP as Flexstandalone andauthentication asopen
verifying SNR andRSS details afterconnecting clientto AP flex mode asstandalone,authentication asopen
EWLCJ171S_RSSI_SNR_05
PassedTo verify SNR andRSS connectivityin DNAcentre withAP as Flexstandalone andauthentication asPSK
verifying SNR andRSS details afterconnecting clientto AP flex mode asstandalone,authentication asPSK
EWLCJ171S_RSSI_SNR_06
PassedTo verify SNR andRSS connectivityin DNAcentre withAP as Flexstandalone andauthentication asdot11
verifying SNR andRSS details afterconnecting clientto AP flex mode asstandalone,authentication asdot11
EWLCJ171S_RSSI_SNR_07
PassedTo verify SNR andRSS connectivityin DNAcentre withAP mode as localand authenticationas dot11
Connecting clientto AP local,authentication asdot11 andverifying SNR andRSS details
EWLCJ171S_RSSI_SNR_08
PassedTo verify SNR andRSS connectivityin DNAcentre withAP mode as local
Connecting clientto AP mode aslocal verifyingSNR and RSSdetails
EWLCJ171S_RSSI_SNR_09
PassedTo verify SNR andRSS connectivityin DNAcentre withAP mode as bridge
Connecting clientto AP mode asbridge,authentication asdot11 andverifying SNR andRSS details
EWLCJ171S_RSSI_SNR_10
PassedTo verify SNR andRSS connectivityin DNAcentre afterdoing intraroaming in WLC
Checking the SNRand RSS valuesafter performingintra roaming inCisco Catalyst9800 SeriesWireless Controller
EWLCJ171S_RSSI_SNR_11
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )68
New FeaturesRSSI and SNR in ASSOC request
PassedTo Check the SNRand RSS valueswhen client roambetween 3800 &1815 Aps
Roaming clientfrom 9115 & 9120Aps and checkingthe SNR and RSSvalues
EWLCJ171S_RSSI_SNR_12
PassedTo verify SNR andRSS connectivityin DNAcentre afterdoing interroaming in CiscoCatalyst 9800Series WirelessController
Checking the SNRand RSS valuesafter performinginter roaming inCisco Catalyst9800 SeriesWireless Controller
EWLCJ171S_RSSI_SNR_13
PassedTo verify SNR andRSS connectivityin DNAcentre afterdoing FT roamingin Cisco Catalyst9800 SeriesWireless Controller
Checking the SNRand RSS valuesafter performingFT roamingroaming in CiscoCatalyst 9800Series WirelessController
EWLCJ171S_RSSI_SNR_14
PassedTo check whetherclient getting AIDvalue or not
Verifying the AIDvalues in clientafter connectingclient
EWLCJ171S_RSSI_SNR_15
WGBDefect IDStatusDescriptionTitleLogical ID
PassedTo change theCapwap Ap toautonomous Ap andcheck if the AP isconverted
Configuring theCapwap Ap toautonomous AP
EWLCJ171S_WGB_01
PassedTo configure theautonomous AP asWGB and check ifthe AP changes asWGB.
Configuring theAutonomous AP asthe WGB
EWLCJ171S_WGB_02
PassedTo verify WGBconfiguration issuccessful or not inCisco Catalyst 9800Series WirelessController
Configuring WGBin Cisco Catalyst9800 SeriesWireless Controller
EWLCJ171S_WGB_03
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )69
New FeaturesWGB
PassedTo associate theWGB on openauthentication andcheck if the WGBassociates with theopenWLAN or not.
Associating theWGB on openauthentication with9115 AP
EWLCJ171S_WGB_04
PassedTo associate theWGB on WPA 2PSK security with9115 bridge AP andcheck if the WGBassociates with theWLAN or not.
Associating theWGB on WPA 2with PSKwith 9115bridge AP
EWLCJ171S_WGB_05
PassedTo associate theWGB on WPA 2802.1x securitywhen AP in localmode and check iftheWGB associateswith the WLAN ornot.
Associating theWGB on WPA 2with 802.1x with9115 AP
EWLCJ171S_WGB_06
PassedTo associate theWGB on openauthentication with9115 APflex+bridge AP andcheck if the WGBassociates with theopenWLAN or not.
Associating theWGB on openauthentication withflex+bridge
EWLCJ171S_WGB_07
PassedTo associate theWGB on WPA 2PSK security with9115 APflex+bridge AP andcheck if the WGBassociates with theWLAN or not.
Associating theWGB on WPA 2with PSK withflex+bridge AP
EWLCJ171S_WGB_08
PassedTo associate theWGB on WPA 2802.1x security with9115 flex+bridgeAP and check if theWGB associateswith the WLAN ornot.
Associating theWGB on WPA 2with 802.1x withflex+bridge AP
EWLCJ171S_WGB_09
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )70
New FeaturesWGB
PassedTo check theroaming of WGBfrom one AP toanother AP whenthe AP is in bridgemode .
Checking of WGBroaming from oneAP to another AP inbridge mode
EWLCJ171S_WGB_10
PassedTo check theroaming of WGBfrom one AP toanother AP whenAps are inflex+bridge mode
Checking of WGBroaming from oneAP to another AP inflex+bridge mode
EWLCJ171S_WGB_11
PassedTo check intercontroller roamingfor WGB clientswith OPEN securityin AP flex+bridgemode
Performing Intercontroller roamingfor WGB clientswith OPEN securityin AP flex+bridgemode
EWLCJ171S_WGB_12
PassedTo check intercontroller roamingfor WGB clientswith WPA2 PSKsecurity in APflex+bridge mode
Performing Intercontroller roamingfor WGB clientswith WPA2 PSKsecurity in APflex+bridge mode
EWLCJ171S_WGB_13
PassedTo check intercontroller roamingfor WGB clientswith WPA2 Dot1xsecurity in APflex+bridge mode
Performing Intercontroller roamingfor WGB clientswith WPA2 Dot1xsecurity in APflex+bridge mode
EWLCJ171S_WGB_14
PassedTo check intercontroller roamingfor WGB clientswith OPEN securityin AP bridge mode
Performing Intercontroller roamingfor WGB clientswith OPEN securityin AP bridge mode
EWLCJ171S_WGB_15
PassedTo check intercontroller roamingfor WGB clientswith WPA2 PSKsecurity in APbridge mode
Performing Intercontroller roamingfor WGB clientswith WPA2 PSKsecurity in APbridge mode
EWLCJ171S_WGB_16
PassedTo check intercontroller roamingfor WGB clientswith WPA2 Dot1xsecurity in APbridge mode
Performing Intercontroller roamingfor WGB clientswith WPA2 Dot1xsecurity in APbridge mode
EWLCJ171S_WGB_17
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )71
New FeaturesWGB
PassedTo check WGBclient associationwith OPEN securityand localauthentication
Associating theWGB on opensecurity with localauthentication
EWLCJ171S_WGB_18
PassedTo verifyreassociation forWGB clients aftersession timeout
CheckingReassociationhappens for WGBclients after sessiontimeout
EWLCJ171S_WGB_19
PassedTo verify localswitching traffic forclient with 9115 AP
Performing localswitching for WGBclients with 9115AP
EWLCJ171S_WGB_20
Intelligent CaptureDefect IDStatusDescriptionTitleLogical ID
PassedTo configureIntelligent captureparameters in9115/9120 Aps
ConfiguringIntelligent Captureparameter details on9115/9120 AP
EWLCJ171S_ic_01
PassedTo ConfigureIntelligent captureparameters indifferent Aps9115/9120 andcheck if theconfigurationremains same afterthe AP reboot.
CheckConfigurationafter the AP reboot
EWLCJ171S_ic_02
PassedTo capture thePacket of the clientwhen the client isconnected to APwith radio as2.4GHz
Packet capture ofclient when theclient is connectedto 9115/9120 APwith 2.4 GHz
EWLCJ171S_ic_03
PassedTo capture thePacket of the clientwhen the client isconnected to APwith radio as 5 GHz
Packet capture ofclient when theclient is connectedto 9115/9120 APwith 5 GHz
EWLCJ171S_ic_04
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )72
New FeaturesIntelligent Capture
PassedTo capture packetwhen the client isconnected to the9115/9120 AP withsecurity as OPEN
Capturing of Packetof the client whenthe client isconnectedwith opensecurity.
EWLCJ171S_ic_05
PassedTo capture packetwhen the client isconnected to the9115/9120 AP withsecurity as WPA 2PSK
Capturing of Packetof the client whenthe client isconnected withWPA 2 PSKsecurity.
EWLCJ171S_ic_06
PassedTo capture packetwhen the client isconnected to the9115/9120 AP withsecurity as WPA 2802.1x
Capturing of Packetof the client whenthe client isconnected withWPA 2 802.1xsecurity.
EWLCJ171S_ic_07
PassedTo capture packetwhen the client isconnected to the9115/9120 AP withsecurity as StaticWEP
Capturing of Packetof the client whenthe client isconnected withStaticWEP security.
EWLCJ171S_ic_08
PassedTo verify if thepacket capturehappens when theAP is configuredwith differentchannel width andpacket captureshows correctinformation.
Verifying if thepacket capturehappens when theAP configured withdifferent channel.
EWLCJ171S_ic_09
PassedTo verify if thepacket capturehappens when theAP is in Flexconnect Localswitchingmodewitha client connected toit
Verify the packetcapture when theAPis in Flex connectLocal switching .
EWLCJ171S_ic_10
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )73
New FeaturesIntelligent Capture
PassedTo verify if thepacket capturehappens when theAP is in Flexconnect Localswitching mode andlocal authenticationwith a clientconnected to it
Verify the packetcapture when theAPis in Flex connectLocal switchingwith localauthentication .
EWLCJ171S_ic_11
PassedTo check whetherintra controllerroaming of clientsworks properly ornot and check ifpacket captureworks properly ornot.
Performing Intracontroller roamingof client andcapturing of packetusing Intelligentcapture
EWLCJ171S_ic_12
PassedTo check whetherinter controllerroaming of Androidclients worksproperly or not
Performing Intercontroller roamingof client andcapturing the packet.
EWLCJ171S_ic_13
PassedTo capture packetwhen the Windowclient is connectedto the 9115/9120 AP
Capturing Packet ofWindows clientwhen the clientconnected to9115/9120 AP
EWLCJ171S_ic_14
PassedTo capture packetwhen the Androidclient is connectedto the 9115/9120 AP
Capturing Packet ofAndroid client whenthe client connectedto 9115/9120 AP
EWLCJ171S_ic_15
PassedTo capture packetwhen the Mac OSclient is connectedto the 9115/9120 AP
Capturing Packet ofMac OS client whenthe client connectedto 9115/9120 AP
EWLCJ171S_ic_16
PassedTo capture packetwhen the IOS clientis connected to the9115/9120 AP
Capturing Packet ofIOS client when theclient connected to9115/9120 AP
EWLCJ171S_ic_17
DNAcsupport forCiscoCatalyst9800SeriesWirelessControllerDefect IDStatusDescriptionTitleLogical ID
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )74
New FeaturesDNAc support for Cisco Catalyst 9800 Series Wireless Controller
PassedTo verify whetherthe device detailsare showing ininventory afteradded in ciscoDNA
Verifying devicedetails in inventoryafteradded/discoveredin cisco DNA
EWLCJ171S_DNACSuppo_01
PassedVerifying whetheradded devicesproperly assured ormonitoring incisco DNA
Monitoring thedevices afteradding in ciscoDNA andverifying same inCisco Catalyst9800 SeriesWirelessController
EWLCJ171S_DNACSuppo_02
PassedChecking whethercount of wirelessdevices are addedin Cisco DNA andthey are monitoredproperly or not
Discoveringmultiple devices incisco DNA andcheck for the samecount in monitoreddevices
EWLCJ171S_DNACSuppo_03
PassedTo verify whetherall AP's detailsshowing ininventory afterdevice discovered
Checking APdevices ininventory afterWireless controllerdiscovered in ciscoDNA
EWLCJ171S_DNACSuppo_04
PassedTo verify AP'scount in Assurancedashboard afteradded in inventory
Checking the AP'scount in networkhealth aftersuccessfully addedin inventory
EWLCJ171S_DNACSuppo_05
PassedTo verify newlyadded AP's countin cisco DNA afterresync
Resync the ciscoDNAand checkingfor the newlyadded AP's countin device
EWLCJ171S_DNACSuppo_06
PassedTo verify whetheruser able to exportthe deviceinventory detailsor not
Exporting theinventory detailsfrom cisco DNA
EWLCJ171S_DNACSuppo_07
PassedTo verify whetheruser able to importthe deviceinventory detailsor not
Importing theinventory details todevice fromcomputer in ciscoDNA
EWLCJ171S_DNACSuppo_08
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )75
New FeaturesDNAc support for Cisco Catalyst 9800 Series Wireless Controller
PassedTo check theoutput for devicecommands afterrun in commandrunner in ciscoDNA
Running thecommands in ciscoDNA usingcommand runner
EWLCJ171S_DNACSuppo_09
PassedTo check whetheruser able to deletethe device frominventory or not
Deleting thedevice frominventory in ciscoDNA
EWLCJ171S_DNACSuppo_10
PassedTo check whetherreachability statuschange to"unreachable" ornot when device isdown
Checking thedevice reachabilitystatus in inventoryafter make thedevice down
EWLCJ171S_DNACSuppo_11
PassedTo check whetheruser able to createsite and provisiondevice
Adding site andprovisioningdevice in ciscoDNA
EWLCJ171S_DNACSuppo_12
PassedTo check AP'spositioning afterpositioned withdifferent radios
Positioning AP'son site withdifferent radios incisco DNA
EWLCJ171S_DNACSuppo_13
PassedTo verify thewireless clientdetails in clientHealth afterconnected to AP
Connecting thewireless clients toAP's and checkingthe client count inDashboard
EWLCJ171S_DNACSuppo_14
PassedTo verify the wiredclients details inclient Health afterconnected to AP
Connecting thewired clients toAP's and checkingthe client count inDashboard
EWLCJ171S_DNACSuppo_15
PassedTo check whetherthe user able todownload theupgrade read linesreport frominventory devicesor not
Downloading theupgrade read linesreport frominventory devicesin cisco DNA
EWLCJ171S_DNACSuppo_16
Support of Trap notification via SNMP3Defect IDStatusDescriptionTitleLogical ID
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )76
New FeaturesSupport of Trap notification via SNMP3
PassedTo verify trapswith v3 user groupsecurity level as"Auth" and v3 userwith "AuthNoPriv"
Creating V3 usergroup with securitylevel "Auth" andmapping to v3 user
EWLCJ171S_Trap_ntfcn_01
PassedTo verify trapswith v3 user groupsecurity level as "No Auth" and v3user with"NoAuthNoPriv"
Creating V3 usergroup with securitylevel "No Auth"and mapping to v3user
EWLCJ171S_Trap_ntfcn_02
PassedTo verify trapswith v3 user groupsecurity level as"Priv" and v3 userwith "AuthPriv"
Creating V3 usergroup with securitylevel "Priv" andmapping to v3 user
EWLCJ171S_Trap_ntfcn_03
PassedTo check whetherable to delete trapreceiver withmapped SNMP v3user
Removing the v3user group aftermapped withSNMP v3 user
EWLCJ171S_Trap_ntfcn_04
PassedTo verify whetheruser able to createSNMPV3 user andget the traps in traphost
Checking the trapsin trap host afterconfiguring theSNMPv3 user withdifferentauthentication andprivacy protocol
EWLCJ171S_Trap_ntfcn_05
PassedTo verify whetheruser able to createSNMPV3 user andget the traps in traphost
Configuring themultiple SNMPtrap hosts andverifying the traps
EWLCJ171S_Trap_ntfcn_06
PassedTo verify traps inhost after changethe Ap modes indevices
Verifying traps intrap host afterenabling wirelessparameter
EWLCJ171S_Trap_ntfcn_07
PassedTo Check whethertraps generating inhost after reloadthe device
Verifying traps intrap host afterreloading device
EWLCJ171S_Trap_ntfcn_08
PassedTo check traps inhost afterperformingswitchover indevice
Observing the trapmessages whenperformedswitchover indevice
EWLCJ171S_Trap_ntfcn_09
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )77
New FeaturesSupport of Trap notification via SNMP3
PassedTo verify traps inhost aftercreate/delete radiusservers in device
Verifying traps intrap host afterenablingaaa_serverparameter
EWLCJ171S_Trap_ntfcn_10
PassedTo verify traps notshowing whensnmpv3 notmapped with traphost
Disabling/notconfiguring thesnmpv3 andchecking for trapsin trap host
EWLCJ171S_Trap_ntfcn_11
mDNS AP supportDefect IDStatusDescriptionTitleLogical Id
PassedTo check whether themdns servicesApplying to Mac OSand Apple Tv clientsor not after enablingthe mDNS-Ap to9115Ap.
Checking mDNSservices are Applyingto Mac OS and AppleTv clients afterenabling the mdns Apto 9115Ap
EWLCJ171S_mDNSAp_01
PassedTo check whether themdns servicesApplying to Mac OSand Apple Tv clientsafter enabling themDNS-Ap to 9120Ap
Checking mDNSservices are Applyingto Mac OS and AppleTv clients afterenabling the mdns Apto 9120Ap
EWLCJ171S_mDNSAp_02
PassedTo check whether themdns servicesApplying to Mac OSand Apple Tv clientsor not after enablingthe mDNS-Ap to4800Ap.
Checking mDNSservices are Applyingto Mac OS and AppleTv clients afterenabling the mdns Apto 4800Ap
EWLCJ171S_mDNSAp_03
PassedTo check whether themdns servicesApplying to Mac OSand Apple Tv clientsor not after enablingthe mDNS-Ap to3700Ap
Checking mDNSservices are Applyingto Mac OS and AppleTv clients afterenabling the mdns Apto 3700Ap
EWLCJ171S_mDNSAp_04
PassedTo check whethermDNS Services andmDNS Ap supportconfigurations able toconfigure or not.
Checking the mDNSServices and mDNSAp configuration.
EWLCJ171S_mDNSAp_05
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )78
New FeaturesmDNS AP support
PassedTo check whethermDNS Services andmDNS Ap supportconfigurations afterchanging the Ap modetoMonitor fromLocal.
Verifying the mDNSservices and mDNSAp supportconfigurations afterchanging the ApmodetoMonitor fromLocal
EWLCJ171S_mDNSAp_06
PassedTo check whether themdns servicesApplying to AppleiPad and IPhone,Apple Tv clients or notafter enabling themDNS-Ap to 9115Ap.
Checking mDNSservices are Applyingto Apple iPad andIPhone and Apple Tvclients after enablingthe mdns Ap to9115Ap
EWLCJ171S_mDNSAp_07
PassedTo check whether themdns servicesApplying to AppleiPad and IPhone,Apple Tv clients or notafter enabling themDNS-Ap to 4800Ap.
Checking mDNSservices are Applyingto Apple iPad andIPhone and Apple Tvclients after enablingthe mdns Ap to4800Ap
EWLCJ171S_mDNSAp_08
PassedTo check whether themdns servicesApplying to AppleiPad and IPhone,Apple Tv clients or notafter enabling themDNS-Ap to 9120Ap.
Checking mDNSservices are Applyingto Apple iPad andIPhone and Apple Tvclients after enablingthe mdns Ap to9120Ap
EWLCJ171S_mDNSAp_09
PassedTo check whether themdns servicesApplying to AppleiPad and IPhone,Apple Tv clients or notafter enabling themDNS-Ap to 3700Ap.
Checking mDNSservices are Applyingto Apple iPad andIPhone and Apple Tvclients after enablingthe mdns Ap to3700Ap
EWLCJ171S_mDNSAp_10
PassedTo check the mDNSServices and mDNSAp supportconfigurations afterexport and importingthe Configuration file.
Checking the mDNSServices and mDNSAp configuration afterexport and importingthe Configuration file.
EWLCJ171S_mDNSAp_11
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )79
New FeaturesmDNS AP support
PassedTo check whether themdns servicesApplying to AppleiPad and Mac os andApple chromecastclients withWPA2-PSK securityor not after enablingthe mDNS-Ap to9115/4800/9120/3700Ap.
Checking mDNSservices are Applyingto Apple iPad andMacos and Applechromecast clientswith WPA2-PSKsecurity after enablingthe mdns Ap to9115/4800/9120/3700Ap
EWLCJ171S_mDNSAp_12
PassedTo check whether themdns servicesApplying to AppleiPad and Mac os andApple chromecastclients withWPA2-SAE securityor not after enablingthe mDNS-Ap to9115/4800/9120/3700Ap's.
Checking mDNSservices are Applyingto Apple iPad andMacos and Applechromecast clientswith WPA3-SAEsecurity after enablingthe mdns Ap to9115/4800/9120/3700Ap's
EWLCJ171S_mDNSAp_13
PassedTo check whether themdns servicesApplying to AppleiPad and Mac os andApple chromecastclients with StaticWEP security or notafter enabling themDNS-Apto9115/4800/9120/3700Ap's.
Checking mDNSservices are Applyingto Apple iPad andMacos and Applechromecast clientswith Static WEPsecurity after enablingthe mdns Apto9115/4800/9120/3700Ap's
EWLCJ171S_mDNSAp_14
Psk Multi Auth SupportDefect IDStatusDescriptionTitleLogical ID
PassedVerify WlanCreating withWPA2 Securitywith MPSK
Creating Wlanwith WPA2Security withMPSK
EWCJ171S_EWC_MPSK_1
PassedVerify Wlan Editwith WPA2Security withMPSK
Edit WPA2Security PSKKeyson MPSK
EWCJ171S_EWC_MPSK_2
PassedVerify WlanDelete withWPA2Security withMPSK
Delete WPA2Security PSKKeyson MPSK
EWCJ171S_EWC_MPSK_3
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )80
New FeaturesPsk Multi Auth Support
CSCvs61119FailedVerify CreatingWlan with WPA2Security withMPSK - Formatwith Hexa:
Creating Wlanwith WPA2Security withMPSK - Formatwith Hexa:
EWCJ171S_EWC_MPSK_4
PassedVerify the SecurityType withAdvance Security
Creating Wlanwith WPA2Security withMPSK - PasswordType : AES :
EWCJ171S_EWC_MPSK_5
PassedVerify WPA2Security withMPSK Applied inWlan's withWindow's Clientswith all the 5 KeyCombinations
Verify WPA2Security withMPSK Applied inWlan's withWindow's Clientswith all the 5 KeyCombinations
EWCJ171S_EWC_MPSK_6
PassedVerify Connect theMAC Clients withall the 5 KeyCombinations
Connect the MACClients
EWCJ171S_EWC_MPSK_7
PassedVerify Connect theAndroid Clientswith all the 5 KeyCombinations:
Connect theAndroid Clients
EWCJ171S_EWC_MPSK_8
PassedVerify Connect theApple Clients withall the 5 KeyCombinations:
Connect the AppleMobile Clientswith all the 5 KeyCombinations:
EWCJ171S_EWC_MPSK_9
PassedVerify Connect theWindows Clientswith all the 5 KeyCombinations:
Connect theWindows Clientswith all the 5 KeyCombinations:
EWCJ171S_EWC_MPSK_10
PassedVerify theConfigurationswith Ap DifferentAp Model 9115
MPSK with ApModel 9115
EWCJ171S_EWC_MPSK_11
PassedVerify theConfigurationswith Ap DifferentAp Model 9120:
Connect ApModel9120
EWCJ171S_EWC_MPSK_12
PassedVerify theConfigurationswith Ap DifferentAp Model 4800:
Connect ApModel4800
EWCJ171S_EWC_MPSK_13
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )81
New FeaturesPsk Multi Auth Support
PassedVerify theConfigurationswith Ap DifferentAp Model 3800
Connect ApModel3800
EWCJ171S_EWC_MPSK_14
PassedVerify theConfigurationswith Ap DifferentAp Model 3700
Connect ApModel3700
EWCJ171S_EWC_MPSK_15
PassedVerify theConfigurationswith Ap DifferentAp Model 1532:
Connect ApModel1532
EWCJ171S_EWC_MPSK_16
PassedVerify WlanCreating withWPA2 Securitywith MPSK
Creating Wlanwith WPA2Security withMPSK
EWLCJ171S_PSK_M_01
PassedVerify Wlan Editwith WPA2Security withMPSK
Edit WPA2Security PSKKeyson MPSK
EWLCJ171S_PSK_M_02
PassedVerify WlanDelete withWPA2Security withMPSK
Delete WPA2Security PSKKeyson MPSK
EWLCJ171S_PSK_M_03
PassedVerify CreatingWlan with WPA2Security withMPSK - Formatwith Hexa:
Creating Wlanwith WPA2Security withMPSK - Formatwith Hexa:
EWLCJ171S_PSK_M_04
PassedVerify the SecurityType withAdvance Security
Creating Wlanwith WPA2Security withMPSK - PasswordType : AES :
EWLCJ171S_PSK_M_05
PassedVerify WPA2Security withMPSK Applied inWlan's withWindow's Clientswith all the 5 KeyCombinations
Verify WPA2Security withMPSK Applied inWlan's withWindow's Clientswith all the 5 KeyCombinations
EWLCJ171S_PSK_M_06
PassedVerify Connect theMAC Clients withall the 5 KeyCombinations
Connect the MACClients
EWLCJ171S_PSK_M_07
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )82
New FeaturesPsk Multi Auth Support
PassedVerify Connect theAndroid Clientswith all the 5 KeyCombinations:
Connect theAndroid Clients
EWLCJ171S_PSK_M_08
PassedVerify Connect theApple Clients withall the 5 KeyCombinations:
Connect the AppleMobile Clientswith all the 5 KeyCombinations:
EWLCJ171S_PSK_M_09
PassedVerify Connect theWindows Clientswith all the 5 KeyCombinations:
Connect theWindows Clientswith all the 5 KeyCombinations:
EWLCJ171S_PSK_M_10
PassedVerify theConfigurationswith Ap DifferentAp Model 9115
MPSK with ApModel 9115
EWLCJ171S_PSK_M_11
PassedVerify theConfigurationswith Ap DifferentAp Model 9120:
Connect ApModel9120
EWLCJ171S_PSK_M_12
PassedVerify theConfigurationswith Ap DifferentAp Model 4800:
Connect ApModel4800
EWLCJ171S_PSK_M_13
PassedVerify theConfigurationswith Ap DifferentAp Model 3800
Connect ApModel3800
EWLCJ171S_PSK_M_14
PassedVerify theConfigurationswith Ap DifferentAp Model 3700
Connect ApModel3700
EWLCJ171S_PSK_M_15
PassedVerify theConfigurationswith Ap DifferentAp Model 1532:
Connect ApModel1532
EWLCJ171S_PSK_M_16
Inter Release Controller MobilityDefect IDStatusDescriptionTitleLogical Id
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )83
New FeaturesInter Release Controller Mobility
PassedTo check whetherboth Control&Datapath gets UP or notbetween 9800Controller & 5520Controller
Setting UP thesecure mobilitytunnel between9800 Controller &5520 WLC
EWLCJ171S_iRCM_01
PassedTo check whethermobility groupsconfigurations getsretained or not afterupload/downloadthe config file viaTFTP in 5520WLC
Checking themobility groupsconfiguration afterupload/downloadthe config file in5520 WLC viaTFTP
EWLCJ171S_iRCM_02
PassedTo check whethermobility groupsconfigurations getsretained or not afterbackup/restore theconfig file via TFTPin Cat 9800Controller
Checking themobility groupsconfiguration afterbackup/restore theconfig file in 9800Controller via TFTP
EWLCJ171S_iRCM_03
PassedTo check whetherAnchor option canbe configured or notin a WLAN forWLC's
Configuring theAnchor controlleroption in a WLANin 5520 WLC UI
EWLCJ171S_iRCM_04
PassedTo check whetherAnchor option canbe configured or notin a 9800Controller.
Configuring theAnchor controlleroption in 9800WLC UI
EWLCJ171S_iRCM_05
PassedTo check whetherInter Controllerroaming worksproperly or not forWindows clientsbetween 5520WLCand 9800 Controllerwith securemobilitytunnel config
Performing InterController roamingof Windows clientbetween 9800Controller and 5520WLC
EWLCJ171S_iRCM_06
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )84
New FeaturesInter Release Controller Mobility
PassedTo check whetherInter Controllerroaming worksproperly or not forAndroid clientsbetween 5520WLCand 9800 Controllerwith securemobilitytunnel config
Performing InterController roamingof Android clientbetween 9800Controller and 5520WLC
EWLCJ171S_iRCM_07
PassedTo check whetherInter Controllerroaming worksproperly or not forMac os clientsbetween 5520WLCand 9800 Controllerwith securemobilitytunnel config
Checking InterController roamingof Mac Os clientbetween 9800Controller and 5520WLC
EWLCJ171S_iRCM_08
PassedTo check whetherInter Controllerroaming worksproperly or not forclients between5520 WLC and9800 Controllerwith security typeWPA2+dot1x(PEAP)
Verifying InterController roamingof different OSclients between9800 Controller and5520 WLC withWPA2+dot1x(PEAP)
EWLCJ171S_iRCM_09
PassedTo check whetherAnchor controllerfunctionality worksproperly or not inCat 9800 Controllerduring the roamingof Windows Client
Checking theAnchor controllerfunctionality duringthe roaming ofWindows Clientwith L2security-WEP
EWLCJ171S_iRCM_10
PassedTo check whetherAnchor controllerfunctionality worksproperly or not inCat 9800 Controllerduring the roamingof Android Client
Checking theAnchor controllerfunctionality duringthe roaming ofAndroid Client withL2 security-WEP
EWLCJ171S_iRCM_11
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )85
New FeaturesInter Release Controller Mobility
PassedTo check whetherAnchor controllerfunctionality worksproperly or not inCat 9800 Controllerduring the roamingof IOS Client
Checking theAnchor controllerfunctionality duringthe roaming of IOSClient with L2security-WEP
EWLCJ171S_iRCM_12
PassedTo check whethermobility groupconfigurations getssynced or not inStandby WLCduring HA
Checking theMobility groupsconfiguration inActive/Standby HAWLC
EWLCJ171S_iRCM_13
PassedTo check whethermobility groupconfigurations getssynced or not inStandby WLCduring HA
Checking theMobility groupsconfiguration inActive/Standby HAWLC
EWLCJ171S_iRCM_14
PassedTo check whetherAnchor controllerfunctionality worksproperly or not inCat 9800 Controllerduring the roamingof Windows Clientwith WPA3-SAEsecurity
Checking theAnchor controllerfunctionality duringthe roaming ofWindows Clientwith L2security-WPA3-SAE
EWLCJ171S_iRCM_15
PassedTo check whetherAnchor controllerfunctionality worksproperly or not inCat 9800 Controllerduring the roamingof Android Clientwith WPA3-SAEsecurity
Checking theAnchor controllerfunctionality duringthe roaming ofAndroid Client withL2security-WPA3-SAE
EWLCJ171S_iRCM_16
PassedTo check whetherAnchor controllerfunctionality worksproperly or not inCat 9800 Controllerduring the roamingof IOS Client withWPA3-SAEsecurity
Checking theAnchor controllerfunctionality duringthe roaming of IOSClient with L2security-WPA3-SAE
EWLCJ171S_iRCM_17
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )86
New FeaturesInter Release Controller Mobility
PassedTo check whetherAnchor controllerfunctionality worksproperly or not inCat 9800 Controllerduring the roamingof Windows Clientwith WPA3-SAEsecurity
Checking InterController roamingof Windows clientbetween 9800Controller and 3504WLC
EWLCJ171S_iRCM_18
PassedTo check whetherAnchor controllerfunctionality worksproperly or not inCat 9800 Controllerduring the roamingof Android Clientwith WPA3-SAEsecurity
Checking InterController roamingof Android clientbetween 9800Controller and 3504WLC
EWLCJ171S_iRCM_19
PassedTo check whetherAnchor controllerfunctionality worksproperly or not inCat 9800 Controllerduring the roamingof IOS Client withWPA3-SAEsecurity
Checking InterController roamingof IOS clientbetween 9800Controller and 3504WLC
EWLCJ171S_iRCM_20
PassedTo check whetherAnchor controllerfunctionality worksproperly or not inCat 9800 Controllerduring the roamingof Windows Clientwith WPA3-SAEsecurity
Checking InterController roamingof Windows clientbetween 9800Controller and 8540WLC
EWLCJ171S_iRCM_21
PassedTo check whetherAnchor controllerfunctionality worksproperly or not inCat 9800 Controllerduring the roamingof Android Clientwith WPA3-SAEsecurity
Checking InterController roamingof Android clientbetween 9800Controller and 8540WLC
EWLCJ171S_iRCM_22
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )87
New FeaturesInter Release Controller Mobility
PassedTo check whetherAnchor controllerfunctionality worksproperly or not inCat 9800 Controllerduring the roamingof IOS Client withWPA3-SAEsecurity
Checking InterController roamingof IOS clientbetween 9800Controller and 8540WLC
EWLCJ171S_iRCM_23
Mesh and Flex+Bridge Support on all Indoor Wave 2 AP'sDefect IDStatusDescriptionTitleLogical Id
PassedTo check whetherthe Meshconfigurations areconfiguring corrector not.
Verifying the Meshconfiguration.
EWLCJ171S_Mesh_01
PassedTo check theMesh/Bridgesupport of 3800 Apafter joining in toCisco Catalyst 9800Series WirelessController
Check the Joining of3800Ap in to CiscoCatalyst 9800 SeriesWireless Controllerwith Mesh /BridgeMode
EWLCJ171S_Mesh_02
PassedTo check theFlex+Bridge Modesupport of 3800 Apin to Cisco Catalyst9800 SeriesWireless Controller
Check the Joining of3800Ap in to CiscoCatalyst 9800 SeriesWireless Controllerwith Flex+BridgeMode
EWLCJ171S_Mesh_03
PassedTo check theMesh/Bridgesupport of 4800 Apafter joining in toCisco Catalyst 9800Series WirelessController
Check the Joining of4800Ap in to CiscoCatalyst 9800 SeriesWireless Controllerwith Mesh/BridgeMode
EWLCJ171S_Mesh_04
PassedTo check theFlex+Bridge Modesupport of 4800 Apin to Cisco Catalyst9800 SeriesWireless Controller
Check the Joining of4800Ap in to CiscoCatalyst 9800 SeriesWireless Controllerwith Flex+BridgeMode
EWLCJ171S_Mesh_05
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )88
New FeaturesMesh and Flex+Bridge Support on all Indoor Wave 2 AP's
PassedTo check whetherthe windows clientis connected or notto bridge mode Ap's
Verify theWindowsclients connectionfor bridge modeAp's with WEPsecurity
EWLCJ171S_Mesh_06
PassedTo check whetherthe Android client isconnected or not tobridge mode Ap's
Verify the Androidclients connectionfor bridge modeAp's with WEPsecurity
EWLCJ171S_Mesh_07
PassedTo check whetherthe IOS client isconnected or not tobridge mode Ap's
Verify the IOSclients connectionfor bridge modeAp's with WEPsecurity
EWLCJ171S_Mesh_08
PassedTo check whetherthe windows clientis connected or notto Flex+bridgemode Ap's
Verify theWindowsclients connectionfor Flex+bridgemode Ap's withWEP security
EWLCJ171S_Mesh_09
PassedTo check whetherthe Android client isconnected or not toFlex+bridge modeAp's
Verify the Androidclients connectionfor Flex+bridgemode Ap's withWEP security
EWLCJ171S_Mesh_10
PassedTo check whetherthe IOS client isconnected or not toFlex+bridge modeAp's
Verify the IOSclients connectionfor Flex+bridgemode Ap's withWEP security
EWLCJ171S_Mesh_11
PassedTo check whetherthe windows clientis connected or notto bridge mode Ap'swith WPA2-PSKsecurity
Verify theWindowsclients connectionfor bridge modeAp's withWPA2-PSk security
EWLCJ171S_Mesh_12
PassedTo check whetherthe Android client isconnected or not tobridge mode Ap'swith WPA2-PSKsecurity
Verify the Androidclients connectionfor bridge modeAp's withWPA2-PSK security
EWLCJ171S_Mesh_13
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )89
New FeaturesMesh and Flex+Bridge Support on all Indoor Wave 2 AP's
PassedTo check whetherthe IOS client isconnected or not tobridge mode Ap'swith WPA2-PSKsecurity
Verify the IOSclients connectionfor bridge modeAp's withWPA2-PSK security
EWLCJ171S_Mesh_14
PassedTo check whetherthe windows clientis connected or notto Flex+bridgemode Ap's withWPA2-PSK security
Verify theWindowsclients connectionfor Flex+bridgemode Ap's withWPA2-PSK security
EWLCJ171S_Mesh_15
PassedTo check whetherthe Android client isconnected or not toFlex+bridge modeAp's withWPA2-PSK security
Verify the Androidclients connectionfor Flex+bridgemode Ap's withWPA2-PSK security
EWLCJ171S_Mesh_16
PassedTo check whetherthe IOS client isconnected or not toFlex+bridge modeAp's withWPA2-PSK security
Verify the IOSclients connectionfor Flex+bridgemode Ap's withWPA2-PSK security
EWLCJ171S_Mesh_17
PassedTo check whetherthe windows clientis connected or notto bridge mode Ap'swith WPA3-SAEsecurity
Verify theWindowsclients connectionfor bridge modeAp's withWPA3-SAEsecurity
EWLCJ171S_Mesh_18
PassedTo check whetherthe Android client isconnected or not tobridge mode Ap'swith WPA3-SAEsecurity
Verify the Androidclients connectionfor bridge modeAp's withWPA3-SAEsecurity
EWLCJ171S_Mesh_19
PassedTo check whetherthe IOS client isconnected or not tobridge mode Ap'swith WPA3-SAEsecurity
Verify the IOSclients connectionfor bridge modeAp's withWPA3-SAEsecurity
EWLCJ171S_Mesh_20
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )90
New FeaturesMesh and Flex+Bridge Support on all Indoor Wave 2 AP's
PassedTo check whetherthe windows clientis connected or notto Flex+bridgemode Ap's withWPA3-SAEsecurity
Verify theWindowsclients connectionfor Flex+bridgemode Ap's withWPA3-SAEsecurity
EWLCJ171S_Mesh_21
PassedTo check whetherthe Android client isconnected or not toFlex+bridge modeAp's withWPA3-SAEsecurity
Verify the Androidclients connectionfor Flex+bridgemode Ap's withWPA3-SAEsecurity
EWLCJ171S_Mesh_22
PassedTo check whetherthe IOS client isconnected or not toFlex+bridge modeAp's withWPA3-SAEsecurity
Verify the IOSclients connectionfor Flex+bridgemode Ap's withWPA3-SAEsecurity
EWLCJ171S_Mesh_23
PassedTo check whetherAp mode changingor not from bridgeto local
Check and verifythe Ap modechanges bychanging Frombridgemode to local
EWLCJ171S_Mesh_24
PassedTo check whetherAp mode changingor not fromFlex+bridge toFlexconnect.
Check and verifythe Ap modechanges bychanging FromFlex+bridge modeto Flexconnect.
EWLCJ171S_Mesh_25
PassedTo check whetherintra roaminghAppening or notwith bridge modeAp's
Check and verifythe intra roamingwith bridge modeAp
EWLCJ171S_Mesh_26
PassedTo check whetherintra roaminghAppening or notwith Flex+bridgemode Ap's
Check and verifythe intra roamingwith Flex+bridgemode Ap
EWLCJ171S_Mesh_27
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )91
New FeaturesMesh and Flex+Bridge Support on all Indoor Wave 2 AP's
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )92
New FeaturesMesh and Flex+Bridge Support on all Indoor Wave 2 AP's
C H A P T E R 4Regression Features - Test Summary
• TACACS, on page 94• Hotspot 2.0, on page 96• Mac filtering (for L2 security), on page 99• Syslogs, on page 102• NAT, on page 105• Rogue AP, on page 106• Internal DHCP Server, on page 107• Open DNS, on page 108• Maximum number of clients per WLAN/radio, on page 110• SNMP trap receivers, on page 113• CWA (Central Web Authentication), on page 115• AAA Override of VLAN Name-id template, on page 119• 802.1x support with EAP-TLS and EAP-PEAP, on page 124• Software update using SFTP, on page 126• Capwap Image Conversion, on page 127• ME AP convert to CAPWAP via DHCP Option, on page 129• CMX Support, on page 130• Aging Test Cases, on page 134• SFTP Domain Name support, on page 137• MC2UC (Videostreaming), on page 138• mDNS Support, on page 142• Schedule WLAN Support (Calendar Profile on CLI), on page 144• Optimized Roaming, on page 146• Authentication Survivability Support, on page 149• Master AP Failover Issues, on page 154• Intelligent Capture-eWC, on page 155• Captive Portal with Internal, External, on page 157• Lobby Ambassador , on page 158• AP 4800 Support, on page 159• WPA3 Support, on page 165• OWE Support , on page 167• Best Practices WebUI, on page 169• Image Predownload , on page 170
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )93
• Image Download Method : HTTP Upload, on page 172• Config Wireless, on page 175• SR Cases, on page 175
TACACSDefectID
StatusDescriptionTitleLogical ID
PassedTo check whether user can ableto read-write access the completeME Cisco Catalyst 9800 SeriesWireless Controller network ornot via TACACS
Allowing the user forcomplete access to MECisco Catalyst 9800Series WirelessController network viaTACACS
EWCJ171S__Reg_01
PassedTo check whether user can ableto have lobby admin access or nottoMECisco Catalyst 9800 SeriesWireless Controller via TACACS
Providing the user forlobby admin access to theME Cisco Catalyst 9800Series WirelessController via TACACS
EWCJ171S__Reg_02
PassedTo check whether user can ableto havemonitoring access (whichis read-only) or not to ME CiscoCatalyst 9800 Series WirelessController via TACACS
Providing the user formonitoring access to theME Cisco Catalyst 9800Series WirelessController via TACACS
EWCJ171S__Reg_03
PassedTo check whether user can ableto login or not in ME CiscoCatalyst 9800 Series WirelessController via TACACS withinvalid credentials
Trying to loginMECiscoCatalyst 9800 SeriesWireless Controller viaTACACS with invalidcredentials
EWCJ171S__Reg_04
PassedTo check whether user can ableto have access with the selectedcheckbox's like "WLAN" and"Controller" checkboxes.
Providing the user forselected access to theMECisco Catalyst 9800Series WirelessController via TACACS
EWCJ171S__Reg_05
PassedTo check whether user can ableto have access with the selectedcheckbox's like "Wireless" and"Security" checkboxes.
Providing the user forselected access to theMECisco Catalyst 9800Series WirelessController via TACACS
EWCJ171S__Reg_06
PassedTo check whether user can ableto have access with the selectedcheckbox's like "Command" and"Management" checkboxes.
Providing the user forselected access to theMECisco Catalyst 9800Series WirelessController via TACACS
EWCJ171S__Reg_07
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )94
Regression Features - Test SummaryTACACS
PassedTo check whether user can ableto have access with the selectedcheckbox'slike"WLAN,Controller,Wireless,Security,CommandsLine Interfaces and"Management" checkboxes.
Providing the user forselected access to theMECisco Catalyst 9800Series WirelessController via TACACS
EWCJ171S__Reg_08
PassedTo verify whether user can ableto login or not in ME CiscoCatalyst 9800 Series WirelessController via TACACS withinvalid credentials
Trying to loginMECiscoCatalyst 9800 SeriesWireless Controllernetwork via TACACSwith Invalid credentials.
EWCJ171S__Reg_09
PassedTo check whether user can ableto read-write access the completeME Cisco Catalyst 9800 SeriesWireless Controller network ornot via TACACS
Allowing the user forcomplete access to MECisco Catalyst 9800Series WirelessController network viaTACACS
EWLCJ171S_Reg_99
PassedTo check whether user can ableto have lobby admin access or nottoMECisco Catalyst 9800 SeriesWireless Controller via TACACS
Providing the user forlobby admin access to theME Cisco Catalyst 9800Series WirelessController via TACACS
EWLCJ171S_Reg_100
PassedTo check whether user can ableto havemonitoring access (whichis read-only) or not to ME CiscoCatalyst 9800 Series WirelessController via TACACS
Providing the user formonitoring access to theME Cisco Catalyst 9800Series WirelessController via TACACS
EWLCJ171S_Reg_101
PassedTo check whether user can ableto login or not in ME CiscoCatalyst 9800 Series WirelessController via TACACS withinvalid credentials
Trying to loginMECiscoCatalyst 9800 SeriesWireless Controller viaTACACS with invalidcredentials
EWLCJ171S_Reg_102
PassedTo check whether user can ableto have access with the selectedcheckbox's like "WLAN" and"Controller" checkboxes.
Providing the user forselected access to theMECisco Catalyst 9800Series WirelessController via TACACS
EWLCJ171S_Reg_103
PassedTo check whether user can ableto have access with the selectedcheckbox's like "Wireless" and"Security" checkboxes.
Providing the user forselected access to theMECisco Catalyst 9800Series WirelessController via TACACS
EWLCJ171S_Reg_104
PassedTo check whether user can ableto have access with the selectedcheckbox's like "Command" and"Management" checkboxes.
Providing the user forselected access to theMECisco Catalyst 9800Series WirelessController via TACACS
EWLCJ171S_Reg_105
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )95
Regression Features - Test SummaryTACACS
PassedTo check whether user can ableto have access with the selectedcheckbox'slike"WLAN,Controller,Wirelessand "Management" checkboxes.
Providing the user forselected access to theMECisco Catalyst 9800Series WirelessController via TACACS
EWLCJ171S_Reg_106
PassedTo verify whether user can ableto login or not in ME CiscoCatalyst 9800 Series WirelessController via TACACS withinvalid credentials
Trying to loginMECiscoCatalyst 9800 SeriesWireless Controllernetwork via TACACSwith Invalid credentials.
EWLCJ171S_Reg_107
Hotspot 2.0Defect IDStatusDescriptionTitleLogical ID
PassedTo verify whetherInternet Accessmode is enabled ornot
Enabling theInternet AccessWLAN andconnecting a client
EWCJ171S__Reg_55
PassedTo verify whetherclient connecting ornot with networktype changes fromone to other
Configuring theNetwork type fromone to another
EWCJ171S__Reg_56
PassedTo verify whetherClient is connectingafter NetworkAuthentication ornot
Configuring theNetworkAuthentication
EWCJ171S__Reg_57
PassedTo verify whetherClient connecting ornot after IPv4 typechanges from one toanother
Checking with IPv4type details
EWCJ171S__Reg_58
PassedTo verify whetherOUI is creating withduplicate name ornot
Creating OUI withDuplicate name
EWCJ171S__Reg_59
PassedTo verify whetherclient will connectwith NAI-relamcredentials or not
Configuring theNAI-relam andEap-methods.
EWCJ171S__Reg_60
PassedTo verify whetherCellular networkinformation addedsuccessfully
Adding cellularnetwork informationwith duplicate name
EWCJ171S__Reg_61
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )96
Regression Features - Test SummaryHotspot 2.0
PassedTo verify whetherOSUSSID applyingor not
Configuring theOSU SSID
EWCJ171S__Reg_62
PassedTo verify whetherOSU Providerinformationapplying or not
Configuring theOSU Providerinformation
EWCJ171S__Reg_63
PassedTo verify whetherWAN status isvarying or not
Configure the WANmetrics.
EWCJ171S__Reg_64
PassedTo verify whetherPort configurationscan vary after clientconnect
Varying Portconfigurations
EWCJ171S__Reg_65
PassedTo verify whetherClient connected ornot after downgradewith Hotspot
Downgrading theAP after Hotspotconfigurations
EWCJ171S__Reg_66
PassedTo verify whetherall hotspot detailsare showingproperly or not
Upgrading the APafter Hotspotconfigurations
EWCJ171S__Reg_67
PassedTo verify whetherclient will connector not after modeschanges in AP
Changing the APmodes after Clientconnect to Hotspot
EWCJ171S__Reg_68
PassedTo verify whethervenue name or Urlapplying or not.
Configure the Venuename and URL.
EWCJ171S__Reg_69
PassedTo verify whetherDomain nameapplying or not.
Configure theDomain name.
EWCJ171S__Reg_70
PassedTo verify whetherclient will roambetween hotspots ornot
Checking theRoaming afterroaming-oiconfigurations
EWCJ171S__Reg_71
PassedTo verify whetheroperating classconfigured or not.
Configure theOperating class
EWCJ171S__Reg_72
PassedTo verify whetherIcon configuredsuccessfully or not.
Configure the Iconfor the Hotspot
EWCJ171S__Reg_73
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )97
Regression Features - Test SummaryHotspot 2.0
PassedTo verify that Meshsetup configured andclient connecting ornot with networktype changes fromone to other
Configure Meshsetup and theNetwork type fromone to another
EWLCJ171S_Reg_07
PassedTo verify whetherInternet Accessmode is enabled ornot
Enabling theInternet AccessWLAN andconnecting client
EWLCJ171S_Reg_08
PassedTo verify whetherclient connecting ornot with networktype changes fromone to other
Configuring theNetwork type fromone to another
EWLCJ171S_Reg_09
PassedTo verify whetherClient is connectingafter NetworkAuthentication ornot
Configuring theNetworkAuthentication
EWLCJ171S_Reg_10
PassedTo verify whetherClient connecting ornot after IPv4 typechanges from one toanother
Checking with IPv4type details
EWLCJ171S_Reg_11
PassedTo verify whetherOUI is creating withduplicate name ornot
Creating OUI withDuplicate name
EWLCJ171S_Reg_12
PassedTo verify whetherclient will connectwith NAI-relamcredentials or not
Configuring theNAI-relam andEap-methods.
EWLCJ171S_Reg_13
PassedTo verify whetherCellular networkinformation addedsuccessfully
Adding cellularnetwork informationwith duplicate name
EWLCJ171S_Reg_14
PassedTo verify whetherOSUSSID applyingor not
Configuring theOSU SSID
EWLCJ171S_Reg_15
PassedTo verify whetherOSU Providerinformationapplying or not
Configuring theOSU Providerinformation
EWLCJ171S_Reg_16
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )98
Regression Features - Test SummaryHotspot 2.0
PassedTo verify whetherWAN status isvarying or not
Configure the WANmetrics.
EWLCJ171S_Reg_17
PassedTo verify whetherPort configurationscan vary after clientconnect
Varying Portconfigurations
EWLCJ171S_Reg_18
PassedTo verify whetherClient connected ornot after downgradewith Hotspot
Downgrading theAP after Hotspotconfigurations
EWLCJ171S_Reg_19
PassedTo verify whetherall hotspot detailsare showingproperly or not
Upgrading the APafter Hotspotconfigurations
EWLCJ171S_Reg_20
PassedTo verify whetherclient will connector not after modeschanges in AP
Changing the APmodes after Clientconnect to Hotspot
EWLCJ171S_Reg_21
PassedTo verify whethervenue name or Urlapplying or not.
Configure the Venuename and URL.
EWLCJ171S_Reg_22
PassedTo verify whetherDomain nameapplying or not.
Configure theDomain name.
EWLCJ171S_Reg_23
PassedTo verify whetherclient will roambetween hotspots ornot
Checking theRoaming afterroaming-oiconfigurations
EWLCJ171S_Reg_24
PassedTo verify whetheroperating classconfigured or not.
Configure theOperating class
EWLCJ171S_Reg_25
Mac filtering (for L2 security)Defect IDStatusDescriptionTitleLogical ID
PassedTo add the windowsClient mac addressin mac filtering ineWC and checkingwhether Clients getsassociated or notsuccessfully in
Adding Windows10 Client macaddress in eWC andchecking theconnection ofClients
EWCJ171S__Reg_101
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )99
Regression Features - Test SummaryMac filtering (for L2 security)
PassedTo check whetheran blank CSV filecould be uploadedin eWC UI
Uploading theempty CSV file ineWC UI
EWCJ171S__Reg_102
PassedTo check whether.CSV file getsimported or not afterimporting theupdated file withsome changes in it
Importing the .CSVfile withmodifications ineWC
EWCJ171S__Reg_103
PassedTo Connect theClient with wlansecurity macfiltering + WPApersonal
Connecting theClient with wlansecurity macfiltering + WPApersonal
EWCJ171S__Reg_104
PassedTo Connect theClient with wlansecurity macfiltering + WPAenterprise
Connecting theClient with wlansecurity macfiltering + WPAenterprise
EWCJ171S__Reg_105
PassedTo Connect theClient with MACFiltering usingWPA Enterprise assecurity typechoosingAuthenticationServer as ExternalRadius andRADIUSCompatibility asother
Connecting theClient with WlanSecurity Type asWPA Enterpriseenabling MACFiltering optionChoosingAuthenticationServer as ExternalRadius andRADIUSCompatibility asother
EWCJ171S__Reg_106
PassedTo Connect theClient after clientidentity accountexpired in ISE
Connecting theclient after clientidentity accountexpired in ISE
EWCJ171S__Reg_107
CSCvs43441FailedTo Connect theclient and thenblocking it using theMAC address
Connecting theClient and thenmoving it to blockusing MAC address
EWCJ171S__Reg_108
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )100
Regression Features - Test SummaryMac filtering (for L2 security)
PassedTo add the windowsClient mac addressin mac filtering inCisco Catalyst 9800Series WirelessController UI andchecking whetherClients getsassociated or notsuccessfully
Adding Windows10 Client macaddress in CiscoCatalyst 9800 SeriesWirelessController-ME andchecking theconnection ofClients in 1800Series ME
EWLCJ171S_Reg_138
PassedTo check whetheran blank CSV filecould be uploadedin Cisco Catalyst9800 SeriesWireless ControllerUI
Uploading theempty CSV file inCisco Catalyst 9800Series WirelessController UI
EWLCJ171S_Reg_139
PassedTo check whether.CSV file getsimported or not afterimporting theupdated file withsome changes in it
Importing the .CSVfile withmodifications inCisco Catalyst 9800Series WirelessController UI
EWLCJ171S_Reg_140
PassedTo Connect theClient with wlansecurity macfiltering + WPApersonal
Connecting theClient with wlansecurity macfiltering + WPApersonal
EWLCJ171S_Reg_141
PassedTo Connect theClient with wlansecurity macfiltering + WPAenterprise
Connecting theClient with wlansecurity macfiltering + WPAenterprise
EWLCJ171S_Reg_142
PassedTo Connect theClient with MACFiltering usingWPA Enterprise assecurity typechoosingAuthenticationServer as AP
Connecting theClient with WLANas MACFiltering+WPAEnterprise ChoosingAuthenticationServer as AP
EWLCJ171S_Reg_143
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )101
Regression Features - Test SummaryMac filtering (for L2 security)
PassedTo Connect theClient with MACFiltering usingWPA Enterprise assecurity typechoosingAuthenticationServer as ExternalRadius andRADIUSCompatibility asother
Connecting theClient with WlanSecurity Type asWPA Enterpriseenabling MACFiltering optionChoosingAuthenticationServer as ExternalRadius andRADIUSCompatibility asother
EWLCJ171S_Reg_144
PassedTo Connect theClient after clientidentity accountexpired in ISE
Connecting theclient after clientidentity accountexpired in ISE
EWLCJ171S_Reg_145
PassedTo Connect theclient and thenblocking it using theMAC address
Connecting theClient and thenmoving it to blockusing MAC address
EWLCJ171S_Reg_146
SyslogsDefect IDStatusDescriptionTitleLogical ID
PassedTo check whetherlog can be generatedor not for ErrorMessage in CiscoCatalyst 9800 SeriesWirelessController-ME GUI
Enabling loggingfor Errors in CiscoCatalyst 9800 SeriesWirelessController-ME
EWCJ171S__Reg_185
PassedTo check whetherlogging for Errorsdisabled or not inCisco Catalyst 9800Series WirelessController-ME
Disabling loggingfor Errors in CiscoCatalyst 9800 SeriesWirelessController-ME
EWCJ171S__Reg_186
PassedTo check whetherlog can be generatedor not for DebugMessage in CiscoCatalyst 9800 SeriesWirelessController-ME GUI
Enabling loggingfor Debugging inCisco Catalyst 9800Series WirelessController-ME
EWCJ171S__Reg_187
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )102
Regression Features - Test SummarySyslogs
PassedTo check whetherlog can be generatedor not forEmergencies inCisco Catalyst 9800Series WirelessController-ME GUI
Enabling loggingserver forEmergencies
EWCJ171S__Reg_188
PassedTo check whetherlog can be generatedor not for alerts inCisco Catalyst 9800Series WirelessController-ME GUI
Enabling loggingfor Alerts
EWCJ171S__Reg_189
PassedTo check whetherlog can be generatedor not for warningin Cisco Catalyst9800 SeriesWirelessController-ME GUI
Enabling loggingfor Warning
EWCJ171S__Reg_190
PassedTo check whetherlog can be generatedor not for criticalevents in CiscoCatalyst 9800 SeriesWirelessController-ME GUI
Enabling loggingfor Critical
EWCJ171S__Reg_191
PassedTo check whetherlog can be generatedor not fornotification in CiscoCatalyst 9800 SeriesWirelessController-ME GUI
Enabling loggingfor Notification
EWCJ171S__Reg_192
PassedTo check whetherlog can be generatedor not forInformationalmessage in CiscoCatalyst 9800 SeriesWirelessController-ME GUI
Enabling loggingfor Informationmessage
EWCJ171S__Reg_193
PassedTo check whetherthe syslog errors aredisplayed in PI
Checking thevalidation of syslogerrors in PI
EWCJ171S__Reg_194
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )103
Regression Features - Test SummarySyslogs
PassedTo check whetherthe sysloginformation aredisplayed in PI
Checking thevalidation of sysloginformation in PI
EWCJ171S__Reg_195
PassedTo check whetherthe historicinformation aboutsyslog in PI
Checking thehistoric informationabout syslog in PI
EWCJ171S__Reg_196
PassedTo check whetherthe syslog warningmessage in PI
Validating thesyslog warningmessage in PI
EWCJ171S__Reg_197
PassedTo check whethersyslog notificationin PI
Validating thesyslog notificationin PI
EWCJ171S__Reg_198
PassedTo verify theseverity filtering forsyslog in PI
Verifying theseverity filtering forsyslog in PI
EWCJ171S__Reg_199
PassedTo verify the DeviceIP address filteringfor syslog in PI
Verifying theDevice IP addressfiltering for syslogin PI
EWCJ171S__Reg_200
PassedTo check whethersyslog's aregenerating in syslogserver after addingin Cisco Catalyst9800 SeriesWireless Controller
Adding syslogserver in CiscoCatalyst 9800 SeriesWireless Controllerand checking thesyslog messages insyslog server
EWLCJ171S_Reg_281
PassedTo verify whethersyslog's aregenerating in syslogserver after addingmultiple servers inCisco Catalyst 9800Series WirelessController
Configuringmultiple syslogservers in CiscoCatalyst 9800 SeriesWireless Controllerand checking thesyslog messages insyslog server
EWLCJ171S_Reg_282
PassedTo check whetherable to downloadthe syslog's fromCisco Catalyst 9800Series WirelessController
Downloading thesyslog's aftergenerated in CiscoCatalyst 9800 SeriesWireless Controller
EWLCJ171S_Reg_283
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )104
Regression Features - Test SummarySyslogs
PassedTo verify whetheruser able to clear theall generated logs inCisco Catalyst 9800Series WirelessController
Clearing the logs incontroller aftergeneratedsuccessfully
EWLCJ171S_Reg_284
PassedTo check the alertsyslog's in syslogserver afterconfigured severitylevel as alert
Checking the alertmessages afterconfigured syslogserver level as"alert"
EWLCJ171S_Reg_285
PassedTo verify the criticallogs in syslog serverafter configurationin device
Configuring syslogservers in CiscoCatalyst 9800 SeriesWireless Controllerwith log levelsetting as critical
EWLCJ171S_Reg_286
PassedTo check theinformation syslog'sin syslog serverafter configuredseverity level asinformation
Checking theinformationmessages afterconfigured syslogserver level as"information"
EWLCJ171S_Reg_287
PassedTo check thedebugging syslog'sin syslog serverafter configuredseverity level asdebugging
Checking thedebuggingmessagesafter configuredsyslog server levelas "debugging"
EWLCJ171S_Reg_288
NATDefect IDStatusDescriptionTitleLogical ID
PassedTo verify whetherDHCP Scope isassociate theInterface or not
Associating theDHCP Interface
EWCJ171S__Reg_212
PassedTo verify whetherPeer-to-peerblocking appliedsuccessfully or not
Peer-to-peerblocking theconfiguration onDHCP through CLI
EWCJ171S__Reg_213
PassedTo verify whetherNATing working ornot in 2.4 GHZradio band
Configuring theNAT functionalityin radio 2.4GHZband for AP
EWCJ171S__Reg_214
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )105
Regression Features - Test SummaryNAT
PassedTo verify whetherNATing working ornot in 5 GHZ radioband
Configuring theNAT functionalityin radio 5GHZ bandAP
EWCJ171S__Reg_215
PassedTo verify whetherClient performanceis showing or not inmonitoring page
Cheking Clientperformance inMonitoring pageafter client connect
EWCJ171S__Reg_216
PassedTo verify whetherConnection showingproperly or not
Checking theConnection andevent log after clientconnect
EWCJ171S__Reg_217
Rogue APDefect IDStatusDescriptionTitleLogical ID
PassedTo verify that useris able to configurethe rogue AP rule ineWC via CLI or not
Configuring therogue AP rule ineWC via CLI
EWCJ171S__Reg_280
PassedTo verify that useris able toenable/disable roguedetection on eWCornot
Enabling/disablingrogue detection oneWC CLI
EWCJ171S__Reg_281
PassedTo verify that useris able to classifyrogue Client oneWC or not
Classifying therogue Client oneWC after Clientconnect
EWCJ171S__Reg_282
PassedTo verify that useris able to classifyrogue AP on thebasis of rogue ruleor not
Verifying that onthe basis of rogueAP rule
EWCJ171S__Reg_283
PassedTo verifying thatspecial characternames rogue devicesare Appearing underrogue AP or not
Verifying thespecial characternames rogue devices
EWCJ171S__Reg_284
PassedTo verifying thatuser is able toupdate the rogueAP's class or not
After Appearing therogue AP in eWC,Updating the theirclass
EWCJ171S__Reg_285
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )106
Regression Features - Test SummaryRogue AP
PassedVerify that user isable to manuallymitigate the rogueAP or not
Manual mitigationof rogue device
EWCJ171S__Reg_286
PassedVerify that user isable to auto mitigatethe rogue AP or not
Auto mitigation ofrogue device
EWCJ171S__Reg_287
PassedVerify that user isable to classifyrogue Adhoc oneWC or not
Classifying therogue Adhoc oneWC
EWCJ171S__Reg_288
PassedVerify that user isable to delete therogue specific rogueAP or all rogue APfrom eWC or not
Deleting the specificrogue AP or allrogue from eWC
EWCJ171S__Reg_289
Internal DHCP ServerDefect IDStatusDescriptionTitleLogical ID
PassedTo verify whether awindow client get Ipaddress and vlan idfrom a specifiedDHCP pool or not
Mapping a InternalDHCP pool toWLAN andverifying WindowsClient IP Addressand vlan id
EWCJ171S__Reg_133
PassedTo verify whether aAndroid client getIp address and vlanid from a specifiedDHCP pool or not
Mapping a InternalDHCP pool toWLAN andverifying AndroidClient IP Addressand vlan id
EWCJ171S__Reg_134
PassedTo verify whether aMAC Os client getIp address and vlanid from a specifiedDHCP pool or not
Mapping a InternalDHCP pool toWLAN andverifying MACClient IP Addressand vlan id
EWCJ171S__Reg_135
PassedTo verify whether aiOS client get Ipaddress and vlan idfrom a specifiedDHCP pool or not
Mapping a InternalDHCP pool toWLAN andverifying iOS ClientIP Address and vlanid
EWCJ171S__Reg_136
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )107
Regression Features - Test SummaryInternal DHCP Server
PassedTo verify whetherDHCP release aparticular IP addressor not after a certainlease period forclient
Checking leaseperiod for connectedClient through aDHCP pool
EWCJ171S__Reg_137
PassedTo verify whether awindow client get Ipaddress and vlan idfrom a specifiedDHCP pool or not
Mapping a InternalDHCP pool toWLAN andverifying WindowsClient IP Addressand vlan id
EWLCJ171S_Reg_211
PassedTo verify whether aAndroid client getIp address and vlanid from a specifiedDHCP pool or not
Mapping a InternalDHCP pool toWLAN andverifying AndroidClient IP Addressand vlan id
EWLCJ171S_Reg_212
PassedTo verify whether aMAC Os client getIp address and vlanid from a specifiedDHCP pool or not
Mapping a InternalDHCP pool toWLAN andverifying MACClient IP Addressand vlan id
EWLCJ171S_Reg_213
PassedTo verify whether aiOS client get Ipaddress and vlan idfrom a specifiedDHCP pool or not
Mapping a InternalDHCP pool toWLAN andverifying iOS ClientIP Address and vlanid
EWLCJ171S_Reg_214
PassedTo verify whetherDHCP release aparticular IP addressor not after a certainlease period forclient
Checking leaseperiod for connectedClient through aDHCP pool
EWLCJ171S_Reg_215
Open DNSDefect IDStatusDescriptionTitleLogical ID
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )108
Regression Features - Test SummaryOpen DNS
PassedTo Verify whetherthe Cisco Catalyst9800 SeriesWireless Controllerregistered in openDNS and CiscoCatalyst 9800Series WirelessController got thedevice ID or not
Verifying CiscoCatalyst 9800Series WirelessControllerregistered withopen DNS server
EWLCJ171S_OpenDNS_01
PassedTo Verify whetherthe profile mappedwith Cisco Catalyst9800 SeriesWireless Controllerand reflected inCisco Catalyst9800 SeriesWireless ControllerGUI & CLI or not
Verifying thecreated profilemappedwith CiscoCatalyst 9800Series WirelessController GUI andCLI
EWLCJ171S_OpenDNS_02
PassedTo verify whetherthe WLAN createdwith open DNSconfiguration ornot
Verifying theWLAN createdwith open DNSconfiguration
EWLCJ171S_OpenDNS_03
PassedTo Verify whetherthe open DNSconfigured or notwhen WindowsJOS connected toUmbrella enabledWLAN Profile
Verifying the openDNS configurationfor the connectedWindows Client inCisco Catalyst9800 SeriesWireless ControllerUI/CLI
EWLCJ171S_OpenDNS_04
PassedTo Verify whetherthe open DNSconfigured or notwhen MAC OSconnected toUmbrella enabledWLAN Profile
Verifying the openDNS configurationfor the connectedMAC OS Client inCisco Catalyst9800 SeriesWireless ControllerUI/CLI
EWLCJ171S_OpenDNS_05
PassedTo Verify whetherthe open DNSconfigured or notwhen iOS clientconnected toUmbrella enabledWLAN Profile
Verifying the openDNS configurationfor the connectediOS Client in CiscoCatalyst 9800Series WirelessController UI/CLI
EWLCJ171S_OpenDNS_06
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )109
Regression Features - Test SummaryOpen DNS
PassedTo Verify whetherthe open DNSconfigured or notwhen Androidclient connected toUmbrella enabledWLAN Profile
Verifying the openDNS configurationfor the connectedAndroid Client inCisco Catalyst9800 SeriesWireless ControllerUI/CLI
EWLCJ171S_OpenDNS_07
PassedTo verify whetherthe data plate statsis cleared or not
clear the data planestats in open DNSconfiguration
EWLCJ171S_OpenDNS_08
PassedTo verify the openDNs configurationafter client roamingbetween 9115 &9120 Aps
Perform theroaming between9115 & 9120 Aps
EWLCJ171S_OpenDNS_09
PassedTo verify the opendns after Interroaming
Perform theroaming betweentwo Cisco Catalyst9800 SeriesWireless Controller
EWLCJ171S_OpenDNS_10
Maximum number of clients per WLAN/radioDefect IDStatusDescriptionTitleLogical ID
PassedTo configuremaximum allowedclient Per AP radioas 4 and connecting5 different clientwith radio policy asALL and check ifthe number of clientthat is configuredalone gets connectedto the WLAN
Configuringmaximum AllowedClients Per APRadio as 4 andconnecting clientwith WPA 2Personal security.
EWCJ171S__Reg_274
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )110
Regression Features - Test SummaryMaximum number of clients per WLAN/radio
PassedTo configuremaximum allowedclient Per AP radioas 3 and connecting4 different clientwith radio policy asALL and now after3 client disconnectone client and checkif other client getauthenticated to theWLAN
Configuringmaximum AllowedClients Per APRadio as 3 andconnecting clientwith WPA 2Enterprise security .
EWCJ171S__Reg_275
PassedTo configuremaximum allowedclient Per AP radioin RF profile andalso setting the sameinWLANand checkwhich of theconfigured numberof clients getsconnected .
Configuringmaximum AllowedClients Per APRadio in RF profileas 4 and in WLANas 3 and connectingthe client
EWCJ171S__Reg_276
PassedTo configuremaximum allowedclient per AP radiosetting the WLANsecurity with WPA2 Personal and radiopolicy as 5 GHz andcheck if only thedefined number ofclient alone connectto the WLAN.
Creating WPA 2Personal securityWLAN with radiopolicy as 5 GHz andconfiguringMaximum AllowedClients Per APRadio
EWCJ171S__Reg_277
PassedTo configuremaximum allowedclient per AP radiosetting the WLANsecurity with WPA2 Enterprise andradio policy as 5GHz and check ifonly the definednumber of clientalone connect to theWLAN.
Creating WPA 2Enterprise securityWLAN with radiopolicy as 5 GHz andconfiguringMaximum AllowedClients Per APRadio
EWCJ171S__Reg_278
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )111
Regression Features - Test SummaryMaximum number of clients per WLAN/radio
PassedTo create WPA 2Personal securityWLAN configuringMaximum allowedclient per AP radiowith radio policy as2.4 GHz and checkif only the definednumber of clientalone connect to theWLAN.
Creating WPA 2Personal securityWLAN with radiopolicy as 2.4 GHzand configuringMaximum AllowedClients Per APRadio
EWCJ171S__Reg_279
PassedTo configuremaximum allowedclient Per AP radioas 4 and connecting5 different clientwith radio policy asALL and check ifthe number of clientthat is configuredalone gets connectedto the WLAN
Configuringmaximum AllowedClients Per APRadio as 4 andconnecting clientwith WPA 2Personal security.
EWLCJ171S_Reg_250
PassedTo configuremaximum allowedclient Per AP radioas 3 and connecting4 different clientwith radio policy asALL and now after3 client disconnectone client and checkif other client getauthenticated to theWLAN
Configuringmaximum AllowedClients Per APRadio as 3 andconnecting clientwith WPA 2Enterprise security .
EWLCJ171S_Reg_251
PassedTo configuremaximum allowedclient Per AP radioin RF profile andalso setting the sameinWLANand checkwhich of theconfigured numberof clients getsconnected .
Configuringmaximum AllowedClients Per APRadio in RF profileas 4 and in WLANas 3 and connectingthe client
EWLCJ171S_Reg_252
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )112
Regression Features - Test SummaryMaximum number of clients per WLAN/radio
PassedTo configuremaximum allowedclient per AP radiosetting the WLANsecurity with WPA2 Personal and radiopolicy as 5 GHz andcheck if only thedefined number ofclient alone connectto the WLAN.
Creating WPA 2Personal securityWLAN with radiopolicy as 5 GHz andconfiguringMaximum AllowedClients Per APRadio
EWLCJ171S_Reg_253
PassedTo configuremaximum allowedclient per AP radiosetting the WLANsecurity with WPA2 Enterprise andradio policy as 5GHz and check ifonly the definednumber of clientalone connect to theWLAN.
Creating WPA 2Enterprise securityWLAN with radiopolicy as 5 GHz andconfiguringMaximum AllowedClients Per APRadio
EWLCJ171S_Reg_254
PassedTo create WPA 2Personal securityWLAN configuringMaximum allowedclient per AP radiowith radio policy as2.4 GHz and checkif only the definednumber of clientalone connect to theWLAN.
Creating WPA 2Personal securityWLAN with radiopolicy as 2.4 GHzand configuringMaximum AllowedClients Per APRadio
EWLCJ171S_Reg_255
SNMP trap receiversDefect IDStatusDescriptionTitleLogical ID
PassedTo check whetherthe SNMP trapreceiver is createdwith invalid IPaddress or not inCME GUI
Create the SNMPtrap receiver namewith invalid IPaddress.
EWCJ171S__Reg_179
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )113
Regression Features - Test SummarySNMP trap receivers
PassedTo check whetherthe SNMP trapreceiver is createdwith more than 31characters or not inCME GUI
Create the SNMPtrap receiver nameis the more than 31characters in CMEui.
EWCJ171S__Reg_180
PassedTo check whetherthe SNMP trapreceiver is receivedthe information ornot.
Checking thevalidation of SNMPtrap receiverinformation.
EWCJ171S__Reg_181
PassedTo verify theseverity filtering forSNMP trap receiverinformation.
Verifying theseverity filtering forSNMP trap receiverinformation.
EWCJ171S__Reg_182
PassedTo verify the DeviceIP address filteringfor SNMP trapreceiver in PI
Verifying theDevice IP addressfiltering for SNMPtrap receiver in PI
EWCJ171S__Reg_183
PassedTo check whetherthe SNMP trapreceiver is createdor not in CME CLI
Create the SNMPtrap receiver byusing the invalid IPaddress in CMECLI.
EWCJ171S__Reg_184
PassedTo check whetherthe SNMP trapreceiver is createdwith invalid IPaddress or not inCME GUI
Create the SNMPtrap receiver namewith invalid IPaddress.
EWLCJ171S_Reg_205
PassedTo check whetherthe SNMP trapreceiver is createdwith more than 31characters or not inCME GUI
Create the SNMPtrap receiver nameis the more than 31characters in CMEui.
EWLCJ171S_Reg_206
PassedTo check whetherthe SNMP trapreceiver is receivedthe information ornot.
Checking thevalidation of SNMPtrap receiverinformation.
EWLCJ171S_Reg_207
PassedTo verify theseverity filtering forSNMP trap receiverinformation.
Verifying theseverity filtering forSNMP trap receiverinformation.
EWLCJ171S_Reg_208
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )114
Regression Features - Test SummarySNMP trap receivers
PassedTo verify the DeviceIP address filteringfor SNMP trapreceiver in PI
Verifying theDevice IP addressfiltering for SNMPtrap receiver in PI
EWLCJ171S_Reg_209
PassedTo check whetherthe SNMP trapreceiver is createdor not in CME CLI
Create the SNMPtrap receiver byusing the invalid IPaddress in CMECLI.
EWLCJ171S_Reg_210
CWA (Central Web Authentication)Defect IDStatusDescriptionTitleLogical ID
PassedTo check WhetherCWA along withACL Configurationin eWC UI createdor not
Creating a CWAalong with ACLConfiguration ineWC UI
EWCJ171S__Reg_224
PassedTo verify whetherJapanese WindowsClient which ismapped to ISE isredirectedsuccessfully or not
Associating aJapanese WindowsClient to a SSIDwhich is mappedwith ISE
EWCJ171S__Reg_225
PassedTo verify whetheriOS Client which ismapped to ISE isredirectedsuccessfully or not
Associating a iOSClient to a SSIDwhich is mappedwith ISE
EWCJ171S__Reg_226
PassedTo verify whetherAndroid Clientwhich is mapped toISE is redirectedsuccessfully or not
Associating aAndroid Client to aSSID which ismapped with ISE
EWCJ171S__Reg_227
PassedTo verify whetherMAC Client whichis mapped to ISE isredirectedsuccessfully or not
Associating a MACOS Client to a SSIDwhich is mappedwith ISE
EWCJ171S__Reg_228
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )115
Regression Features - Test SummaryCWA (Central Web Authentication)
PassedTo verify whetherclient connected tossid redirecting toGuest portal pagewith invalidcredentials
Associating adifferent Clients toSSID which ismapped with ISEand redirecting toGuest portal pagewith invalidcredentials
EWCJ171S__Reg_229
PassedTo verify whetherdifferent Clients isredirectedsuccessfully andchecking thatparticularapplication isdropped or not
Associating adifferent Clients toa SSID which ismappedwith ISE bycreating AVCprofile
EWCJ171S__Reg_230
PassedTo verify whetherClients gets deniedwhen it is connectedto SSID which ismapped with ISE
Associating adifferent Clients toa SSID which ismappedwith ISE bydenying the actionin ACL
EWCJ171S__Reg_231
PassedTo verify whetherClients getsconnected to SSIDwhich is mappedwith ISE bypermitting the actionin ACL using TCPprotocol
Associating adifferent Clients toa SSID which ismappedwith ISE bypermitting the actionin ACL using TCPprotocol
EWCJ171S__Reg_232
PassedTo verify whetherClients getsconnected to SSIDwhich is mappedwith ISE bypermitting the actionin ACL using UDPprotocol
Associating adifferent Clients toa SSID which ismappedwith ISE bypermitting the actionin ACL using UDPprotocol
EWCJ171S__Reg_233
PassedTo verify whetherClients getsconnected to SSIDwhich is mappedwith ISE bypermitting the actionin ACL using ICMPprotocol
Associating adifferent Clients toa SSID which ismappedwith ISE bypermitting the actionin ACL using ICMPprotocol
EWCJ171S__Reg_234
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )116
Regression Features - Test SummaryCWA (Central Web Authentication)
PassedTo verify whetherthe expired Guestuser gets properError messageswhen he logging in
Checking theexpired RadiusGuest User forproper errormessage
EWCJ171S__Reg_235
PassedTo verify whetherAAA authenticationis occurring whenone radius servergoes down
Validate whethereWC is switchbetween configuredRadius servers
EWCJ171S__Reg_236
PassedTo verify whetherConfigurations areshowing same ordifferent aftercontroller reboot
Reboot theController afterCWA enabling
EWCJ171S__Reg_237
PassedTo verify whetherACL rule is createdor not through CLI
Creating a CWAalong with ACLConfigurationthrough CLI
EWCJ171S__Reg_238
PassedTo verify whetherconfigurationdisplay errormessage or notwhen the user is inRead-only
Checking theconfiguration ofCWA when the useris in Read-only
EWCJ171S__Reg_239
PassedTo verify whetherexport and import isdone successfully
Exporting/Importingconfiguration ofCWA
EWCJ171S__Reg_240
PassedTo check WhetherCWA along withACL Configurationin Cisco Catalyst9800 SeriesWireless ControllerUI created or not
Creating a CWAalong with ACLConfiguration inCisco Catalyst 9800Series WirelessController UI
EWLCJ171S_Reg_216
PassedTo verify whetherJapanese WindowsClient which ismapped to ISE isredirectedsuccessfully or not
Associating aJapanese WindowsClient to a SSIDwhich is mappedwith ISE
EWLCJ171S_Reg_217
PassedTo verify whetheriOS Client which ismapped to ISE isredirectedsuccessfully or not
Associating a iOSClient to a SSIDwhich is mappedwith ISE
EWLCJ171S_Reg_218
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )117
Regression Features - Test SummaryCWA (Central Web Authentication)
PassedTo verify whetherAndroid Clientwhich is mapped toISE is redirectedsuccessfully or not
Associating aAndroid Client to aSSID which ismapped with ISE
EWLCJ171S_Reg_219
PassedTo verify whetherMAC Client whichis mapped to ISE isredirectedsuccessfully or not
Associating a MACOS Client to a SSIDwhich is mappedwith ISE
EWLCJ171S_Reg_220
PassedTo verify whetherclient connected tossid redirecting toGuest portal pagewith invalidcredentials
Associating adifferent Clients toSSID which ismapped with ISEand redirecting toGuest portal pagewith invalidcredentials
EWLCJ171S_Reg_221
PassedTo verify whetherdifferent Clients isredirectedsuccessfully andchecking thatparticularapplication isdropped or not
Associating adifferent Clients toa SSID which ismappedwith ISE bycreating AVCprofile
EWLCJ171S_Reg_222
PassedTo verify whetherClients gets deniedwhen it is connectedto SSID which ismapped with ISE
Associating adifferent Clients toa SSID which ismappedwith ISE bydenying the actionin ACL
EWLCJ171S_Reg_223
PassedTo verify whetherClients getsconnected to SSIDwhich is mappedwith ISE bypermitting the actionin ACL using TCPprotocol
Associating adifferent Clients toa SSID which ismappedwith ISE bypermitting the actionin ACL using TCPprotocol
EWLCJ171S_Reg_224
PassedTo verify whetherClients getsconnected to SSIDwhich is mappedwith ISE bypermitting the actionin ACL using UDPprotocol
Associating adifferent Clients toa SSID which ismappedwith ISE bypermitting the actionin ACL using UDPprotocol
EWLCJ171S_Reg_225
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )118
Regression Features - Test SummaryCWA (Central Web Authentication)
PassedTo verify whetherClients getsconnected to SSIDwhich is mappedwith ISE bypermitting the actionin ACL using ICMPprotocol
Associating adifferent Clients toa SSID which ismappedwith ISE bypermitting the actionin ACL using ICMPprotocol
EWLCJ171S_Reg_226
PassedTo verify whetherthe expired Guestuser gets properError messageswhen he logging in
Checking theexpired RadiusGuest User forproper errormessage
EWLCJ171S_Reg_227
PassedTo verify whetherAAA authenticationis occurring whenone radius servergoes down
Validate whetherCisco Catalyst 9800Series WirelessController is switchbetween configuredRadius servers
EWLCJ171S_Reg_228
PassedTo verify whetherConfigurations areshowing same ordifferent aftercontroller reboot
Reboot theController afterCWA enabling
EWLCJ171S_Reg_229
PassedTo verify whetherACL rule is createdor not through CLI
Creating a CWAalong with ACLConfigurationthrough CLI
EWLCJ171S_Reg_230
PassedTo verify whetherconfigurationdisplay errormessage or notwhen the user is inRead-only
Checking theconfiguration ofCWA when the useris in Read-only
EWLCJ171S_Reg_231
PassedTo verify whetherexport and import isdone successfully
Exporting/Importingconfiguration ofCWA
EWLCJ171S_Reg_232
AAA Override of VLAN Name-id templateDefect IDStatusDescriptionTitleLogical ID
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )119
Regression Features - Test SummaryAAA Override of VLAN Name-id template
PassedTo enable AAAoverride andconnecting a JOSwindow 7 client tothe AAA overrideenabled with WPA2 Personal securityWLAN and check ifthe VLAN fromAAA server isoverridden to theclient
Enable AAAoverride andconnecting a JOSwindow 7 client tothe AAA overrideenabled WLANwith WPA 2Personal security .
EWCJ171S__Reg_109
PassedTo enable AAAoverride andconnecting aAndroid client to theAAA overrideenabled with WPA2 Personal securityWLAN and check ifthe VLAN fromAAA server isoverridden to theclient
Enable AAAoverride andconnecting aAndroid client to theAAA overrideenabled WLANwith WPA 2Personal security .
EWCJ171S__Reg_110
PassedTo enable AAAoverride andconnecting a IOSclient to the AAAoverride enabledwith WPA 2Personal securityWLAN and check ifthe VLAN fromAAA server isoverridden to theclient
Enable AAAoverride andconnecting a IOSclient to the AAAoverride enabledWLAN with WPA2 Personal security.
EWCJ171S__Reg_111
PassedTo enable AAAoverride andconnecting a MacOS client to theAAA overrideenabled with WPA2 Personal securityWLAN and check ifthe VLAN fromAAA server isoverridden to theclient
Enable AAAoverride andconnecting a MacOS client to theAAA overrideenabled WLANwith WPA 2Personal security .
EWCJ171S__Reg_112
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )120
Regression Features - Test SummaryAAA Override of VLAN Name-id template
PassedTo connect a JOSWindow 7 client toAAA overrideenabled WLANwith WPA 2Enterprise securityand check if theNative VLAN isoverridden or not.
Connecting a JOSwindow 7 client tothe AAA overrideenabled WLANwith WPA 2Enterprise securityenabled with AAAoverride .
EWCJ171S__Reg_113
PassedTo connect aAndroid client toAAA overrideenabled WLANwith WPA 2Enterprise securityand check if theNative VLAN isoverridden or not.
Connecting aAndroid client to theAAA overrideenabled WLANwith WPA 2Enterprise securityenabled with AAAoverride .
EWCJ171S__Reg_114
PassedTo connect a IOSclient to AAAoverride enabledWLAN with WPA2Enterprise securityand check if theNative VLAN isoverridden or not.
Connecting a IOSclient to the AAAoverride enabledWLAN with WPA2Enterprise securityenabled with AAAoverride .
EWCJ171S__Reg_115
PassedTo connect a MacOS client to AAAoverride enabledWLAN with WPA2Enterprise securityand check if theNative VLAN isoverridden or not.
Connecting aMacOS client to theAAA overrideenabled WLANwith WPA 2Enterprise securityenabled with AAAoverride .
EWCJ171S__Reg_116
PassedTo enable AAAoverride andconnecting a JOSwindow 10 client tothe AAA overrideenabled with WPA2 Personal securityWLAN and check ifthe VLAN fromAAA server isoverridden to theclient
Enable AAAoverride andconnecting a JOSwindow 10 client tothe AAA overrideenabled WLANwith WPA 2Personal security .
EWLCJ171S_Reg_289
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )121
Regression Features - Test SummaryAAA Override of VLAN Name-id template
PassedTo enable AAAoverride andconnecting aAndroid client to theAAA overrideenabled with WPA2 Personal securityWLAN and check ifthe VLAN fromAAA server isoverridden to theclient
Enable AAAoverride andconnecting aAndroid client to theAAA overrideenabled WLANwith WPA 2Personal security .
EWLCJ171S_Reg_290
PassedTo enable AAAoverride andconnecting a IOSclient to the AAAoverride enabledwith WPA 2Personal securityWLAN and check ifthe VLAN fromAAA server isoverridden to theclient
Enable AAAoverride andconnecting a IOSclient to the AAAoverride enabledWLAN with WPA2 Personal security.
EWLCJ171S_Reg_291
PassedTo enable AAAoverride andconnecting a MacOS client to theAAA overrideenabled with WPA2 Personal securityWLAN and check ifthe VLAN fromAAA server isoverridden to theclient
Enable AAAoverride andconnecting a MacOS client to theAAA overrideenabled WLANwith WPA 2Personal security .
EWLCJ171S_Reg_292
PassedTo connect a JOSWindow 10 client toAAA overrideenabled WLANwith WPA 2Enterprise securityand check if theNative VLAN isoverridden or not.
Connecting awindow 10 client tothe AAA overrideenabled WLANwith WPA 2Enterprise securityenabled with AAAoverride .
EWLCJ171S_Reg_293
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )122
Regression Features - Test SummaryAAA Override of VLAN Name-id template
PassedTo connect a moreno of JOS Window10 client to AAAoverride enabledWLAN with WPA2Enterprise securityand check if theNative VLAN isoverridden or not.
Connecting a morethan one window 10client to the AAAoverride enabledWLAN with WPA2 security enabledwith AAA override.
EWLCJ171S_Reg_294
PassedTo connect aAndroid client toAAA overrideenabled WLANwith WPA 2Enterprise securityand check if theNative VLAN isoverridden or not.
Connecting aAndroid client to theAAA overrideenabled WLANwith WPA 2Enterprise securityenabled with AAAoverride .
EWLCJ171S_Reg_295
PassedTo connect a IOSclient to AAAoverride enabledWLAN with WPA2Enterprise securityand check if theNative VLAN isoverridden or not.
Connecting a IOSclient to the AAAoverride enabledWLAN with WPA2Enterprise securityenabled with AAAoverride .
EWLCJ171S_Reg_296
PassedTo connect a MacOS client to AAAoverride enabledWLAN with WPA2Enterprise securityand check if theNative VLAN isoverridden or not.
Connecting aMacOS client to theAAA overrideenabled WLANwith WPA 2Enterprise securityenabled with AAAoverride .
EWLCJ171S_Reg_297
PassedTo connect a MacOS client to AAAoverride enabledWLAN with WPA2Enterprise securityand check if theNative VLAN isoverridden or not.
Connecting a 2 or 3MacOS client to theAAA overrideenabled WLANwith WPA 2Enterprise securityenabled with AAAoverride .
EWLCJ171S_Reg_298
PassedTo connect a clientto the AAA overrideenabled with themacfiltering.
Connecting a clientto the AAA overrideenabled with themacfiltering.
EWLCJ171S_Reg_299
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )123
Regression Features - Test SummaryAAA Override of VLAN Name-id template
PassedTo connectcombination ofdifferent client toAAA overrideenabled WLANwith WPA 2Enterprise securityand check if theNative VLAN isoverridden or not.
ConnectingCombination ofdifferent client tothe AAA overrideenabled WLANwith WPA 2Enterprise securityenabled with AAAoverride .
EWLCJ171S_Reg_300
PassedTo connect morenumber of client toAAA overrideenabled WLANwith WPA 2Enterprise securityand check if theNative VLAN isoverridden or not.
Connecting a 2 or 3IOS client to theAAA overrideenabled WLANwith WPA 2Enterprise securityenabled with AAAoverride .
EWLCJ171S_Reg_301
802.1x support with EAP-TLS and EAP-PEAPDefect IDStatusDescriptionTitleLogical ID
PassedTo check whetherAP joins WLC ornot after dot1xauthentication fromSwitch/ISE
Enabling dot1x authfor AP and joiningAP to WLC
EWCJ171S__Reg_251
PassedTo check whetherWindows clientsassociatedsuccessfully or notonce AP joined viadot1x authenticationfrom Switch/ISE
AssociatingWindows clients toAP joined via Dot1xauthentication
EWCJ171S__Reg_252
PassedTo check whetherCOSAP joinsWLCor not after dot1xauthentication fromSwitch/ISE via EAPmethod PEAP
Joining COS AP toWLC throughDot1x+PEAPauthentication
EWCJ171S__Reg_253
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )124
Regression Features - Test Summary802.1x support with EAP-TLS and EAP-PEAP
PassedTo check whetheriOS AP joins WLCor not after dot1xauthentication fromSwitch/ISE via EAPmethod TLS
Joining iOS AP toWLC throughDot1x+EAP TLSauthentication
EWCJ171S__Reg_254
PassedTo check whetherAP's joins WLC ornot through LSCprovisioning &dot1x authentication
Trying to join AP'sthrough Dot1xauthentication withLSC provisioning
EWCJ171S__Reg_255
PassedTo check whetherAP throws errormessage or notwhen invalidcredentials providedduring dot1xauthentication
Providing invalidcredentials for APauthentication andchecking the statusof AP in console
EWCJ171S__Reg_256
PassedTo check whetherAP joins WLC ornot even dot1x isdisabled in switch
Disabling dot1xsupport in Switchand trying toassociate AP viaDot1xauthentication toWLC
EWCJ171S__Reg_257
PassedConfiguring the3850 Switch forDot1xauthentication bymapping the identityprofiles to a port.
Enabling dot1x authfor AP in 3850Switch
EWCJ171S__Reg_258
PassedTo check whether802.1x authparameters restoresor not afterexport/import theconfig file in WLCUI via TFTP
Checking theconfiguration of802.1xauthenticationparameters afterexport/import theconfig file
EWCJ171S__Reg_259
PassedTo check whetherMac OS clientsassociatedsuccessfully or notonce AP joined viadot1x authenticationfrom Switch/ISE
AssociatingMacOSclients to AP joinedvia Dot1xauthentication
EWCJ171S__Reg_260
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )125
Regression Features - Test Summary802.1x support with EAP-TLS and EAP-PEAP
PassedTo check whetherAndroid clientsassociatedsuccessfully or notonce AP joined viadot1x authenticationfrom Switch/ISE
AssociatingAndroidclients to AP joinedvia Dot1xauthentication
EWCJ171S__Reg_261
PassedTo check whetheriOS clientsassociatedsuccessfully or notonce AP joined viadot1x authenticationfrom Switch/ISE
Associating iOSclients to AP joinedvia Dot1xauthentication
EWCJ171S__Reg_262
PassedTo check whetherRead only user canbe able to configureor not the 802.1xauth parameters inWLC UI
Trying to configureof 802.1xauthenticationparameters viaRead-only User
EWCJ171S__Reg_263
Software update using SFTPDefect IDStatusDescriptionTitleLogical ID
PassedVerifying eWCsoftware updating ornot via SFTP server
eWC Softwareupdating via SFTPserver
EWCJ171S__Reg_117
PassedVerifying eWCsoftware updating ornot via SFTP server
Invalid eWCSoftware updatingvia SFTP server
EWCJ171S__Reg_118
PassedChecking the eWC.bin softwareupdating or not viaSFTP server
eWC .bin Softwareupdating via SFTPserver
EWCJ171S__Reg_119
PassedChecking the eWC.bin softwareupdating or not viaSFTP server
eWC .SSHSoftwareupdating via SFTPserver
EWCJ171S__Reg_120
PassedTo check whethersoftware isupgrading or notthrough InvalidSFTP IP
eWC Softwareupdating throughInvalid SFTP IP
EWCJ171S__Reg_121
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )126
Regression Features - Test SummarySoftware update using SFTP
PassedVerifying eWCsoftware isupgrading or notthrough InvalidSFTP username/password
eWC Softwareupdating throughInvalid SFTP username/password
EWCJ171S__Reg_122
PassedVerifying CiscoCatalyst 9800 SeriesWireless Controllersoftware updating ornot via SFTP server
Cisco Catalyst 9800Series WirelessControllerSoftwareupdating via SFTPserver
EWLCJ171S_Reg_01
PassedVerifyingCiscoCatalyst 9800 SeriesWireless Controllersoftware updating ornot via SFTP server
Invalid CiscoCatalyst 9800 SeriesWireless ControllerSoftware updatingvia SFTP server
EWLCJ171S_Reg_02
PassedChecking the CiscoCatalyst 9800 SeriesWirelessController.binsoftware updating ornot via SFTP server
Cisco Catalyst 9800Series WirelessController .binSoftware updatingvia SFTP server
EWLCJ171S_Reg_03
PassedChecking the CiscoCatalyst 9800 SeriesWireless Controller.bin softwareupdating or not viaSFTP server
Cisco Catalyst 9800Series WirelessController .SSHSoftware updatingvia SFTP server
EWLCJ171S_Reg_04
PassedTo check whethersoftware isupgrading or notthrough InvalidSFTP IP
Cisco Catalyst 9800Series WirelessController Softwareupdating throughInvalid SFTP IP
EWLCJ171S_Reg_05
PassedVerifying CiscoCatalyst 9800 SeriesWireless Controllersoftware isupgrading or notthrough InvalidSFTP username/password
Cisco Catalyst 9800Series WirelessController Softwareupdating throughInvalid SFTP username/password
EWLCJ171S_Reg_06
Capwap Image ConversionDefect IDStatusDescriptionTitleLogical ID
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )127
Regression Features - Test SummaryCapwap Image Conversion
PassedTo verify whetherAP join to the CiscoCatalyst 9800 SeriesWireless ControllereWC anddownloading theimage or not
Joining the APimage with less thanother than eWC andchecking the details
EWCJ171S__Reg_158
PassedTo verify whetherAP is joining &downloading imagefrom eWC or notafter efficient joinenable state
Joining the AP afterEfficient joinenable/Disable state
EWCJ171S__Reg_159
PassedTo verify whetherCOS AP is joiningto the eWC witheWC capable or not
CAPWAP imagejoins to eWC
EWCJ171S__Reg_160
PassedTo verify whetherIOS AP is joining tothe eWCwith AP &eWC differentversion and notdownloading theimage
CAPWAP imagejoins to eWC
EWCJ171S__Reg_161
PassedTo verify whetherAps converting theeWC capable or notafter upgrade theeWC image
Upgrading the eWCimage and makingthe capwap Aps toeWC capable
EWCJ171S__Reg_162
PassedTo verify whetherAps converting theeWC capable or notafter downgrade theeWC image
Downgrading theeWC image andmaking the capwapAps to eWC capable
EWCJ171S__Reg_163
PassedTo verify whether itis possible toremove the MasterAP at the time ofAP downloading theimage
Removing theMaster AP at thetime of APdownloading theimage
EWCJ171S__Reg_164
PassedTo verify whetherAP joining to theeWCor not with APand eWC times aredifferent
Changing the eWCtime and trying tojoin the AP
EWCJ171S__Reg_165
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )128
Regression Features - Test SummaryCapwap Image Conversion
PassedTo verify whetherafter Master Apfailover, Ap is againdownloading theimages or not
Performing theMaster AP failover
EWCJ171S__Reg_166
PassedTo verify whetherafter imageinterchange eWCcoming as changedversion or not
Interchanging theeWC image
EWCJ171S__Reg_167
PassedTo verify whetherafter APinterchange, AP iscoming as changedimage with eWCcapable controller ornot
Interchanging theAP image andmaking as eWCController
EWCJ171S__Reg_168
ME AP convert to CAPWAP via DHCP OptionDefect IDStatusDescriptionTitleLogical ID
PassedTo change the APtype to capwapusing DHCP 43
Change the 1852ME AP type tocapwap usingDHCP 43
EWCJ171S__Reg_201
PassedTo change the APtype to capwapusing DHCP 43
Change the 2800ME AP type tocapwap usingDHCP 43
EWCJ171S__Reg_202
PassedTo change the APtype to capwapusing DHCP 43
Change the 1542ME AP type tocapwap usingDHCP 43
EWCJ171S__Reg_203
PassedTo change the APtype to capwapusing DHCP 43
Change the 1815iME AP type tocapwap usingDHCP 43
EWCJ171S__Reg_204
PassedTo change the APmode afterconverting in toCAPWAP
Change the APmode afterconverting in tocapwap
EWCJ171S__Reg_205
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )129
Regression Features - Test SummaryME AP convert to CAPWAP via DHCP Option
PassedTo connect the iOSclient to capwapconverted AP fromME withWPA2-PSK security
Connect iOS clientto Capwapconverted AP fromME withWPA2-PSK security
EWCJ171S__Reg_206
PassedTo connect theAndroid client tocapwap convertedAP from ME withWPA2-PSK security
Connect Androidclient to Capwapconverted AP fromME withWPA2-PSK security
EWCJ171S__Reg_207
PassedTo verify that MEchanged to capwapand send joinrequest to controllerthat configuredusing DHCP option43
Config primary,secondary controllerin AP and reloadME controller
EWCJ171S__Reg_208
PassedTo verify that APjoined to secondcontroller if first ipis wrong in dhcp
Config twocontroller ip in dhcpoption 43 and firstshould be wrong ip
EWCJ171S__Reg_209
PassedTo change the APtype to capwapusing DHCP 43andjoin in to vWLC
Change the 1815iME AP type tocapwap usingDHCP 43 and joinin to vWLC
EWCJ171S__Reg_210
PassedTo verify that MEController changedto capwap aftermake Preferredmaster as anotherME capable AP
Make the PreferredMaster one MEcapable AP andreload MEController
EWCJ171S__Reg_211
CMX SupportDefect IDStatusDescriptionTitleLogical ID
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )130
Regression Features - Test SummaryCMX Support
PassedTo add a CiscoCisco Catalyst 9800Series WirelessController_ME toCMX and check ifthe Cisco Catalyst9800 SeriesWirelessController_ME getsadded to the CMXwith the CiscoCatalyst 9800 SeriesWirelessController_MEstatus showing
Adding Cisco CiscoCatalyst 9800 SeriesWirelessController_ME toCMX
EWCJ171S__Reg_169
PassedTo import mapsfrom primeinfrastructure andcheck if the mapsgets imported to thecmx .
Importing mapsfrom primeinfrastructure
EWCJ171S__Reg_170
PassedTo import the mapsfrom prime infra toCMX with Accesspoints and check ifthe access pointdetails are showncorrectly includingClients connected .
Importing the mapswith Access pointsfrom PI to CMX
EWCJ171S__Reg_171
PassedTo connect a Clientto the access pointon the floor andcheck if the detailsof the Clients areshown correctly ornot.
Connecting theClient to the accesspoint on the floorand check if thedetails of the Client.
EWCJ171S__Reg_172
PassedTo connect manyClient from differentplace to the accesspoints and check ifthe location of theClient are shown inCMX
Connecting manyClients fromdifferent place andcheck the locationof the Clients
EWCJ171S__Reg_173
PassedTo check whetherClient device can besearched byspecifying its MACaddress or not
UsingMAC addressthe Client devicesare searched
EWCJ171S__Reg_174
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )131
Regression Features - Test SummaryCMX Support
PassedTo check whetherClient device can besearched byspecifying its IPaddress or not
Using IP address theClient devices aresearched
EWCJ171S__Reg_175
PassedTo verify whetherClient device can besearched byspecifying the SSIDor not
Using SSID theClient devices aresearched
EWCJ171S__Reg_176
PassedVerifying thenumber of Clientsvisiting the buildingor floor on hourlyand daily basis
Number of Clientsvisiting the buildingand floor in hourlyand daily basis
EWCJ171S__Reg_177
PassedTo check thenumber of newClients and repeatedClients to thebuilding or floor .
Number of Clientvisits to the buildingand the floor
EWCJ171S__Reg_178
PassedTo add a CiscoCisco Catalyst 9800Series WirelessController_ME toCMX and check ifthe Cisco Catalyst9800 SeriesWirelessController_ME getsadded to the CMXwith the CiscoCatalyst 9800 SeriesWirelessController_MEstatus showing
Adding Cisco CiscoCatalyst 9800 SeriesWirelessController_ME toCMX
EWLCJ171S_Reg_118
PassedTo import mapsfrom primeinfrastructure andcheck if the mapsgets imported to thecmx .
Importing mapsfrom primeinfrastructure
EWLCJ171S_Reg_119
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )132
Regression Features - Test SummaryCMX Support
PassedTo import the mapsfrom prime infra toCMX with Accesspoints and check ifthe access pointdetails are showncorrectly includingClients connected .
Importing the mapswith Access pointsfrom PI to CMX
EWLCJ171S_Reg_120
PassedTo connect a Clientto the access pointon the floor andcheck if the detailsof the Clients areshown correctly ornot.
Connecting theClient to the accesspoint on the floorand check if thedetails of the Client.
EWLCJ171S_Reg_121
PassedTo connect manyClient from differentplace to the accesspoints and check ifthe location of theClient are shown inCMX
Connecting manyClients fromdifferent place andcheck the locationof the Clients
EWLCJ171S_Reg_122
PassedTo check whetherClient device can besearched byspecifying its MACaddress or not
UsingMAC addressthe Client devicesare searched
EWLCJ171S_Reg_123
PassedTo check whetherClient device can besearched byspecifying its IPaddress or not
Using IP address theClient devices aresearched
EWLCJ171S_Reg_124
PassedTo verify whetherClient device can besearched byspecifying the SSIDor not
Using SSID theClient devices aresearched
EWLCJ171S_Reg_125
PassedVerifying thenumber of Clientsvisiting the buildingor floor on hourlyand daily basis
Number of Clientsvisiting the buildingand floor in hourlyand daily basis
EWLCJ171S_Reg_126
PassedTo check thenumber of newClients and repeatedClients to thebuilding or floor .
Number of Clientvisits to the buildingand the floor
EWLCJ171S_Reg_127
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )133
Regression Features - Test SummaryCMX Support
Aging Test CasesDefect IDStatusDescriptionTitleLogical ID
PassedTo connect JOSclient to 1815I andcheck the debug logfor the client andcheck the RSSIvalue for 2 to 3hours.
Connecting a JOSclient to a 1815I APand enable debuglog and check RSSIvalue for the clientfor 2 to 3 hours.
EWCJ171S__Reg_123
PassedTo connectWindowclient to 1815I andcheck the debug logfor the client andcheck the RSSIvalue for 2 to 3hours.
Connecting aWindow client to a1815I AP andenable debug logand check RSSIvalue for the clientfor 2 to 3 hours.
EWCJ171S__Reg_124
PassedTo connect Androidclient to 1815I andcheck the debug logfor the client andcheck the RSSIvalue for 2 to 3hours.
Connecting aAndroid client to a1815I AP andenable debug logand check RSSIvalue for the clientfor 2 to 3 hours.
EWCJ171S__Reg_125
PassedTo connect IOSclient to 1815I andcheck the debug logfor the client andcheck the RSSIvalue for 2 to 3hours.
Connecting a IOSclient to a 1815I APand enable debuglog and check RSSIvalue for the clientfor 2 to 3 hours.
EWCJ171S__Reg_126
PassedTo connect MACOS client to 1815Iand check the debuglog for the client andcheck the RSSIvalue for 2 to 3hours.
Connecting a MACOS client to a 1815IAP and enabledebug log and checkRSSI value for theclient for 2 to 3hours.
EWCJ171S__Reg_127
PassedTo check the JOSClient details whenthe client isconnected to2802/3802 AP andcheck the Averagerate for the client formore than 2 hours
Checking the JOSClient details whenthe client isconnected to2802/3802 AP andcheck the Averagerate for the client formore than 2 hours
EWCJ171S__Reg_128
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )134
Regression Features - Test SummaryAging Test Cases
PassedTo check theAndroid Clientdetails when theclient is connectedto 2802/3802 APand check theAverage rate for theclient for more than2 hours
Checking theAndroid Clientdetails when theclient is connectedto 2802/3802 APand check theAverage rate for theclient for more than2 hours
EWCJ171S__Reg_129
PassedTo check theWindow Clientdetails when theclient is connectedto 2802/3802 APand check theAverage rate for theclient for more than2 hours
Checking theWindow Clientdetails when theclient is connectedto 2802/3802 APand check theAverage rate for theclient for more than2 hours
EWCJ171S__Reg_130
PassedTo check the IOSClient details whenthe client isconnected to2802/3802 AP andcheck the Averagerate for the client formore than 2 hours
Checking the IOSClient details whenthe client isconnected to2802/3802 AP andcheck the Averagerate for the client formore than 2 hours
EWCJ171S__Reg_131
PassedTo check the Airquality data fordifferent AP withJOS client andcheck the health ofthe particular AP ina regular interval
Checking the AirQuality data fordifferent AP withJOS client andcheck the health ofthe AP in a regularinterval.
EWCJ171S__Reg_132
PassedTo connect JOSclient to 1815I andcheck the debug logfor the client andcheck the RSSIvalue for 2 to 3hours.
Connecting a JOSclient to a 1815I APand enable debuglog and check RSSIvalue for the clientfor 2 to 3 hours.
EWLCJ171S_Reg_128
PassedTo connectWindowclient to 1815I andcheck the debug logfor the client andcheck the RSSIvalue for 2 to 3hours.
Connecting aWindow client to a1815I AP andenable debug logand check RSSIvalue for the clientfor 2 to 3 hours.
EWLCJ171S_Reg_129
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )135
Regression Features - Test SummaryAging Test Cases
PassedTo connect Androidclient to 1815I andcheck the debug logfor the client andcheck the RSSIvalue for 2 to 3hours.
Connecting aAndroid client to a1815I AP andenable debug logand check RSSIvalue for the clientfor 2 to 3 hours.
EWLCJ171S_Reg_130
PassedTo connect IOSclient to 1815I andcheck the debug logfor the client andcheck the RSSIvalue for 2 to 3hours.
Connecting a IOSclient to a 1815I APand enable debuglog and check RSSIvalue for the clientfor 2 to 3 hours.
EWLCJ171S_Reg_131
PassedTo connect MACOS client to 1815Iand check the debuglog for the client andcheck the RSSIvalue for 2 to 3hours.
Connecting a MACOS client to a 1815IAP and enabledebug log and checkRSSI value for theclient for 2 to 3hours.
EWLCJ171S_Reg_132
PassedTo check the JOSClient details whenthe client isconnected to2802/3802 AP andcheck the Averagerate for the client formore than 2 hours
Checking the JOSClient details whenthe client isconnected to2802/3802 AP andcheck the Averagerate for the client formore than 2 hours
EWLCJ171S_Reg_133
PassedTo check theAndroid Clientdetails when theclient is connectedto 2802/3802 APand check theAverage rate for theclient for more than2 hours
Checking theAndroid Clientdetails when theclient is connectedto 2802/3802 APand check theAverage rate for theclient for more than2 hours
EWLCJ171S_Reg_134
PassedTo check theWindow Clientdetails when theclient is connectedto 2802/3802 APand check theAverage rate for theclient for more than2 hours
Checking theWindow Clientdetails when theclient is connectedto 2802/3802 APand check theAverage rate for theclient for more than2 hours
EWLCJ171S_Reg_135
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )136
Regression Features - Test SummaryAging Test Cases
PassedTo check the IOSClient details whenthe client isconnected to2802/3802 AP andcheck the Averagerate for the client formore than 2 hours
Checking the IOSClient details whenthe client isconnected to2802/3802 AP andcheck the Averagerate for the client formore than 2 hours
EWLCJ171S_Reg_136
PassedTo check the Airquality data fordifferent AP withJOS client andcheck the health ofthe particular AP ina regular interval
Checking the AirQuality data fordifferent AP withJOS client andcheck the health ofthe AP in a regularinterval.
EWLCJ171S_Reg_137
SFTP Domain Name supportDefect IDStatusDescriptionTitleLogical ID
PassedVerifying eWCsoftware updating ornot via SFTP server
eWC Softwareupdating via SFTPserver
EWCJ171S__Reg_152
PassedVerifying eWCsoftware updating ornot via SFTP server
Invalid eWCSoftware updatingvia SFTP server
EWCJ171S__Reg_153
PassedChecking the eWC.bin softwareupdating or not viaSFTP server
eWC .bin Softwareupdating via SFTPserver
EWCJ171S__Reg_154
PassedChecking the eWC.bin softwareupdating or not viaSFTP server
eWC .SSHSoftwareupdating via SFTPserver
EWCJ171S__Reg_155
PassedTo check whethersoftware isupgrading or notthrough InvalidSFTP IP
eWC Softwareupdating throughInvalid SFTP IP
EWCJ171S__Reg_156
PassedVerifying eWCsoftware isupgrading or notthrough InvalidSFTP username/password
eWC Softwareupdating throughInvalid SFTP username/password
EWCJ171S__Reg_157
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )137
Regression Features - Test SummarySFTP Domain Name support
PassedVerifying CiscoCatalyst 9800 SeriesWireless Controllersoftware updating ornot via SFTP server
Cisco Catalyst 9800Series WirelessController Softwareupdating via SFTPserver
EWLCJ171S_Reg_199
CSCvs41888FailedVerifying CiscoCatalyst 9800 SeriesWireless Controllersoftware updating ornot via SFTP server
Invalid CiscoCatalyst 9800 SeriesWireless ControllerSoftware updatingvia SFTP server
EWLCJ171S_Reg_200
PassedChecking the CiscoCatalyst 9800 SeriesWireless Controller.bin softwareupdating or not viaSFTP server
Cisco Catalyst 9800Series WirelessController.binSoftware updatingvia SFTP server
EWLCJ171S_Reg_201
PassedChecking the CiscoCatalyst 9800 SeriesWireless Controller.bin softwareupdating or not viaSFTP server
Cisco Catalyst 9800Series WirelessController .SSHSoftware updatingvia SFTP server
EWLCJ171S_Reg_202
PassedTo check whethersoftware isupgrading or notthrough InvalidSFTP IP
Cisco Catalyst 9800Series WirelessController Softwareupdating throughInvalid SFTP IP
EWLCJ171S_Reg_203
PassedVerifying CiscoCatalyst 9800 SeriesWireless Controllersoftware isupgrading or notthrough InvalidSFTP username/password
Cisco Catalyst 9800Series WirelessController Softwareupdating throughInvalid SFTP username/password
EWLCJ171S_Reg_204
MC2UC (Videostreaming)Defect IDStatusDescriptionTitleLogical ID
PassedTo verify that thelocal-switchingclient subscribed tovideo streamingreceives MC2UCtraffic
MC2UC traffic tolocal-switchingclient
EWCJ171S__Reg_90
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )138
Regression Features - Test SummaryMC2UC (Videostreaming)
PassedTo verify the localswitching clientreceivingMC trafficwhen MC2UC isdisabled at theWLAN
MC2UC traffic tolocal-switchingclientwhenMC2UCis disabled
EWCJ171S__Reg_91
PassedTo verify the localswitching clientreceivingMC trafficwhenMedia Streamis disabled at AP
MC2UC traffic tolocal-switchingclient when Mediastream is removedat AP
EWCJ171S__Reg_92
PassedTo verify whetherthe multiplelocal-switchingclients receivesMC2UC trafficwhen subscribed tovideo stream
Multiple LS clientsin same vlan, samewlan, receivingMC2UC traffic
EWCJ171S__Reg_93
PassedTo verify whetherAP stops sendingtraffic when clientdisassociates
Client disassociateswhen receivingMC2UC traffic
EWCJ171S__Reg_94
PassedTo verify thelocal-switchingclient receivingMC2UC trafficroaming betweenradios of the AP
LS client receivingMC2UC trafficroambetween radiosat the AP
EWCJ171S__Reg_95
PassedTo verify whetherthe LS clientreceives continuousMC2UC trafficwhen AP movesfrom connected >SA > connectedwith same config
Flex LS clientreceiving MC2UCtraffic when APmove fromconnected > SA >connected withsame config
EWCJ171S__Reg_96
PassedTo verify whetherthe LS clientreceives continuousMC2UC trafficwhen AP movesfrom connected >SA > connectedwith different config
Flex LS clientreceiving MC2UCtraffic when APmove fromconnected > SA >connected withdifferent config
EWCJ171S__Reg_97
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )139
Regression Features - Test SummaryMC2UC (Videostreaming)
PassedTo verify whetherclient reassociatesand receivesMC2UC trafficwhen flex AP isrebooted inconnected mode.
Flex AP reboot inconnected modewhen Flex LS clientreceiving MC2UCtraffic
EWCJ171S__Reg_98
PassedTo verify whetherthe video streamingconfig for LSWLAN has beensynced between theActive and Standbyin HA setup
Video stream configsync for LS WLANin HA setup
EWCJ171S__Reg_99
PassedTo verify whetherLS client withMC2UC enabledreceives unicasttraffic afterswitchover
LS client withMC2UC enabledreceiving trafficafter switchover inHA pair
EWCJ171S__Reg_100
PassedTo verify that thelocal-switchingclient subscribed tovideo streamingreceives MC2UCtraffic
MC2UC traffic tolocal-switchingclient
EWLCJ171S_Reg_34
PassedTo verify the localswitching clientreceivingMC trafficwhen MC2UC isdisabled at theWLAN
MC2UC traffic tolocal-switchingclientwhenMC2UCis disabled
EWLCJ171S_Reg_35
PassedTo verify the localswitching clientreceivingMC trafficwhenMedia Streamis disabled at AP
MC2UC traffic tolocal-switchingclient when Mediastream is removedat AP
EWLCJ171S_Reg_36
PassedTo verify whetherthe multiplelocal-switchingclients receivesMC2UC trafficwhen subscribed tovideo stream
Multiple LS clientsin same vlan, samewlan, receivingMC2UC traffic
EWLCJ171S_Reg_37
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )140
Regression Features - Test SummaryMC2UC (Videostreaming)
PassedTo verify whetherAP stops sendingtraffic when clientdisassociates
Client disassociateswhen receivingMC2UC traffic
EWLCJ171S_Reg_38
PassedTo verify thelocal-switchingclient receivingMC2UC trafficroaming betweenradios of the AP
LS client receivingMC2UC trafficroambetween radiosat the AP
EWLCJ171S_Reg_39
PassedTo verify whetherthe LS clientreceives continuousMC2UC trafficwhen AP movesfrom connected >SA > connectedwith same config
Flex LS clientreceiving MC2UCtraffic when APmove fromconnected > SA >connected withsame config
EWLCJ171S_Reg_40
PassedTo verify whetherthe LS clientreceives continuousMC2UC trafficwhen AP movesfrom connected >SA > connectedwith different config
Flex LS clientreceiving MC2UCtraffic when APmove fromconnected > SA >connected withdifferent config
EWLCJ171S_Reg_41
PassedTo verify whetherclient reassociatesand receivesMC2UC trafficwhen flex AP isrebooted inconnected mode.
Flex AP reboot inconnected modewhen Flex LS clientreceiving MC2UCtraffic
EWLCJ171S_Reg_42
PassedTo verify whetherthe video streamingconfig for LSWLAN has beensynced between theActive and Standbyin HA setup
Video stream configsync for LS WLANin HA setup
EWLCJ171S_Reg_43
PassedTo verify whetherLS client withMC2UC enabledreceives unicasttraffic afterswitchover
LS client withMC2UC enabledreceiving trafficafter switchover inHA pair
EWLCJ171S_Reg_44
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )141
Regression Features - Test SummaryMC2UC (Videostreaming)
mDNS SupportDefect IDStatusDescriptionTitleLogical ID
PassedVerifying mDNSservices are appliedto Mac OS withopen ssid
Checking mDNSservices are appliedto MAC OS withwlan open security
EWCJ171S__Reg_264
PassedVerifying mDNSservices are appliedto MacOS and IOSwith WPA2personal security
Checking mDNSservices are appliedto MacOS and IOSwith wlan WPA2personal security
EWCJ171S__Reg_265
PassedVerifying mDNSservices are appliedto AppleTV andIOS with WPA2Enterprise securityand radius asauthenticationserver
Checking mDNSservices are appliedto Apple TV andIOS with wlanWPA2 Enterprisesecurity andauthenticationserver as radius
EWCJ171S__Reg_266
PassedVerifying mDNSservices are appliedto MacOS and IOSwith WPA3-SAEsecurity
Checking mDNSservices are appliedto MacOS and IOSwith wlanWPA3-SAEsecurity
EWCJ171S__Reg_267
PassedVerifying mDNSservices are appliedto Apple Deviceswith fast transitionenabled
Checking mDNSservices are appliedto Apple Deviceswith Fast transitionenabled
EWCJ171S__Reg_268
PassedChecking clientcommunicationbetween two clientsconnected todifferent vlan
Performing clientcommunicationbetween two clientsconnected twodifferent vlan
EWCJ171S__Reg_269
PassedChecking roamingwhen mDNS isapplied
Performing roamingoperation whenmDNS is applied
EWCJ171S__Reg_270
PassedChecking mDNSconfig afterexporting config file
Exporting configfile after upgradingeWC
EWCJ171S__Reg_271
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )142
Regression Features - Test SummarymDNS Support
PassedVerifying mDNSprofile is creatingwith requiredservices
Creating mDNSprofile by addingrequired services
EWCJ171S__Reg_272
PassedVerifying mDNSservices are appliedto IOS with StaticWEP ssid
Checking mDNSservices are appliedto IOS with wlanStaticWEP security
EWCJ171S__Reg_273
PassedVerifying mDNSservices are appliedto Mac OS withopen ssid
Checking mDNSservices are appliedto MAC OS withwlan open security
EWLCJ171S_Reg_271
PassedVerifying mDNSservices are appliedto MacOS and IOSwith WPA2personal security
Checking mDNSservices are appliedto MacOS and IOSwith wlan WPA2personal security
EWLCJ171S_Reg_272
PassedVerifying mDNSservices are appliedto AppleTV andIOS with WPA2Enterprise securityand radius asauthenticationserver
Checking mDNSservices are appliedto Apple TV andIOS with wlanWPA2 Enterprisesecurity andauthenticationserver as radius
EWLCJ171S_Reg_273
PassedVerifying mDNSservices are appliedto MacOS and IOSwith WPA3-SAEsecurity
Checking mDNSservices are appliedto MacOS and IOSwith wlanWPA3-SAEsecurity
EWLCJ171S_Reg_274
PassedVerifying mDNSservices are appliedto Apple Deviceswith fast transitionenabled
Checking mDNSservices are appliedto Apple Deviceswith Fast transitionenabled
EWLCJ171S_Reg_275
PassedChecking clientcommunicationbetween two clientsconnected todifferent vlan
Performing clientcommunicationbetween two clientsconnected twodifferent vlan
EWLCJ171S_Reg_276
PassedChecking roamingwhen mDNS isapplied
Performing roamingoperation whenmDNS is applied
EWLCJ171S_Reg_277
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )143
Regression Features - Test SummarymDNS Support
PassedChecking mDNSconfig afterexporting config file
Exporting configfile after upgradingCisco Catalyst 9800Series WirelessController
EWLCJ171S_Reg_278
PassedVerifying mDNSprofile is creatingwith requiredservices
Creating mDNSprofile by addingrequired services
EWLCJ171S_Reg_279
PassedVerifying mDNSservices are appliedto IOS with StaticWEP ssid
Checking mDNSservices are appliedto IOS with wlanStaticWEP security
EWLCJ171S_Reg_280
Schedule WLAN Support (Calendar Profile on CLI)Defect IDStatusDescriptionTitleLogical ID
PassedTo check whetherWLAN isbroadcasting or noton configuredStart/End time
Configure theCalendar Profile inopen securityWLAN withStart/End time.
EWCJ171S__Reg_10
PassedTo check whetherWLAN isbroadcasting or noton configuredStart/End time
Configure theCalendar Profile inWPA2 securityWLAN withStart/End time.
EWCJ171S__Reg_11
PassedTo check whetherWLAN isbroadcasting or noton configuredStart/End time
Configure theCalendar Profile inWPA3 securityWLAN withStart/End time.
EWCJ171S__Reg_12
PassedTo check whetherWLAN isbroadcasting or noton configuredStart/End time
Configure theCalendar Profile inStatic WEP securityWLAN withStart/End time.
EWCJ171S__Reg_13
PassedTo check whetherWLAN isbroadcasting or noton configuredStart/End time
Configure theCalendar Profile inStatic WEP securityWLAN withStart/End time withMonthly/Weekly/Dailyoption.
EWCJ171S__Reg_14
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )144
Regression Features - Test SummarySchedule WLAN Support (Calendar Profile on CLI)
PassedTo check whetherWLAN isbroadcasting or noton configuredStart/End time
Configure theCalendar Profile inStatic WEP securityWLAN with L3Security,MACFiltering and withStart/End time .
EWCJ171S__Reg_15
PassedTo check whetherclient isdisassociating afterend time.
Observe the ClientDisassociation onCalendar Profileafter end time
EWCJ171S__Reg_16
CSCvs53410FailedTo check whetherWLAN isbroadcasting or noton configuredStart/End time
Configure theCalendar Profile inopen securityWLAN withStart/End time.
EWLCJ171S_Reg_88
PassedTo check whetherWLAN isbroadcasting or noton configuredStart/End time
Configure theCalendar Profile inWPA2 securityWLAN withStart/End time.
EWLCJ171S_Reg_89
PassedTo check whetherWLAN isbroadcasting or noton configuredStart/End time
Configure theCalendar Profile inWPA3 securityWLAN withStart/End time.
EWLCJ171S_Reg_90
PassedTo check whetherWLAN isbroadcasting or noton configuredStart/End time
Configure theCalendar Profile inStatic WEP securityWLAN withStart/End time.
EWLCJ171S_Reg_91
PassedTo check whetherWLAN isbroadcasting or noton configuredStart/End time
Configure theCalendar Profile inStatic WEP securityWLAN withStart/End time withMonthly/Weekly/Dailyoption.
EWLCJ171S_Reg_92
PassedTo check whetherWLAN isbroadcasting or noton configuredStart/End time
Configure theCalendar Profile inStatic WEP securityWLAN with L3Security,MACFiltering and withStart/End time .
EWLCJ171S_Reg_93
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )145
Regression Features - Test SummarySchedule WLAN Support (Calendar Profile on CLI)
PassedTo check whetherclient isdisassociating afterend time.
Observe the ClientDisassociation onCalendar Profileafter end time
EWLCJ171S_Reg_94
Optimized RoamingDefect IDStatusDescriptionTitleLogical ID
PassedTo verify thatoptimized roamingwith 2.4 GHz bandgets configured ornot and checkassociation ofAndroid client
Configuringoptimized roamingwith 2.4 GHz bandand roam Androidclient
EWCJ171S__Reg_138
PassedTo verify thatoptimized roamingwith 2.4 GHzband,1 MBPSThresholds getsconfigured or notand checkassociation ofAndroid client
Configuringoptimized roamingwith 2.4 GHz band,1 MBPSThresholds androamAndroid client
EWCJ171S__Reg_139
PassedTo verify thatoptimized roamingwith 5 GHz bandand checkassociation ofAndroid client
Configuringoptimized roamingwith 5 GHz bandand roam Androidclient
EWCJ171S__Reg_140
PassedTo verify thatoptimized roamingwith 5 GHz band , 6MBPS Thresholdconfigured andcheck association ofAndroid client
Configuringoptimized roamingwith 5 GHz band , 6MBPS Thresholdand roam Androidclient
EWCJ171S__Reg_141
PassedTo verify thatoptimized roamingwith 2.4 GHz band,5.5 MBPSThresholdconfiguredsuccessfully andcheck association ofiOS client
Configuringoptimized roamingwith 2.4 GHz band,5.5 MBPSThreshold and roamiOS client
EWCJ171S__Reg_142
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )146
Regression Features - Test SummaryOptimized Roaming
PassedTo verify thatoptimized roamingwith 2.4 GHz band,9 MBPS Thresholdconfigured andcheck association ofiOS client
Configuringoptimized roamingwith 2.4 GHz band,9 MBPS Thresholdand roam iOS client
EWCJ171S__Reg_143
PassedTo verify thatoptimized roamingwith 5 GHz band&customizedinterval(40 Sec)configuredsuccessfully andcheck association ofiOS client
Configuringoptimized roamingwith 5 GHz bandand roam iOS client
EWCJ171S__Reg_144
PassedTo verify thatoptimized roamingwith 5 GHz band ,12MBPSThresholdconfiguredsuccessfully andcheck association ofiOS client
Configuringoptimized roamingwith 5 GHz band ,12MBPSThresholdand roam iOS client
EWCJ171S__Reg_145
PassedTo verify that clientgot disassociatedwhen signal is poorwhile moving fromAP
Moving theAndroidclient from AP afterenable optimizedroaming
EWCJ171S__Reg_146
PassedTo verify that clientwouldn'tdisassociated whensignal is poor whilemoving from AP
Moving the iOSclient from AP afterdisabling theoptimized roaming
EWCJ171S__Reg_147
PassedTo verify that clientgot disassociatedwhen signal is poorwhile moving from2700 AP withinterferenceavailability
Moving theAndroidclient from AP afterenable optimizedroaming inMEwithinterferenceavailability
EWCJ171S__Reg_148
PassedTo verify that iOSclient connecting ornot from whereSSID signal is week
Connect iOS clientfrom where SSIDsignal is week
EWCJ171S__Reg_149
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )147
Regression Features - Test SummaryOptimized Roaming
PassedTo verify thatoptimizationroamingconfigurationremain same afterreboot
Restarting the MEeWC afteroptimized roamingconfiguration
EWCJ171S__Reg_150
PassedTo verify thatoptimizationroamingconfigurationremain same afterimport and exportconfiguration file
Importing/exportingconfiguration fileafter optimizedroaming configuring
EWCJ171S__Reg_151
PassedTo verify thatoptimized roamingwith 2.4 GHz bandgets configured ornot and checkassociation ofAndroid client
Configuringoptimized roamingwith 2.4 GHz bandand roam Androidclient
EWLCJ171S_Reg_147
PassedTo verify thatoptimized roamingwith 5 GHz bandand checkassociation ofAndroid client
Configuringoptimized roamingwith 5 GHz bandand roam Androidclient
EWLCJ171S_Reg_148
PassedTo verify thatoptimized roamingwith 5 GHz band , 6MBPS Thresholdconfigured andcheck association ofAndroid client
Configuringoptimized roamingwith 5 GHz band , 6MBPS Thresholdand roam Androidclient
EWLCJ171S_Reg_149
PassedTo verify thatoptimized roamingwith 2.4 GHz band,9 MBPS Thresholdconfigured andcheck association ofiOS client
Configuringoptimized roamingwith 2.4 GHz band,9 MBPS Thresholdand roam iOS client
EWLCJ171S_Reg_150
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )148
Regression Features - Test SummaryOptimized Roaming
PassedTo verify thatoptimized roamingwith 5 GHz band&customizedinterval(40 Sec)configuredsuccessfully andcheck association ofiOS client
Configuringoptimized roamingwith 5 GHz bandand roam iOS client
EWLCJ171S_Reg_151
PassedTo verify that clientgot disassociatedwhen signal is poorwhile moving fromAP
Moving theAndroidclient from AP afterenable optimizedroaming
EWLCJ171S_Reg_152
PassedTo verify that clientwouldn'tdisassociated whensignal is poor whilemoving from AP
Moving the iOSclient from AP afterdisabling theoptimized roaming
EWLCJ171S_Reg_153
PassedTo verify that clientgot disassociatedwhen signal is poorwhile moving fromAPwith interferenceavailability
Moving theAndroidclient from AP afterenable optimizedroaming withinterferenceavailability
EWLCJ171S_Reg_154
PassedTo verify that iOSclient connecting ornot from whereSSID signal is week
Connect iOS clientfrom where SSIDsignal is week
EWLCJ171S_Reg_155
PassedTo verify thatoptimizationroamingconfigurationremain same afterreboot
Restarting the CiscoCatalyst 9800 SeriesWireless Controllerafter optimizedroamingconfiguration
EWLCJ171S_Reg_156
PassedTo verify thatoptimizationroamingconfigurationremain same afterimport and exportconfiguration file
Importing/exportingconfiguration fileafter optimizedroaming configuring
EWLCJ171S_Reg_157
Authentication Survivability SupportDefect IDStatusDescriptionTitleLogical ID
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )149
Regression Features - Test SummaryAuthentication Survivability Support
PassedTo verify whetherClient is connectingto WLAN withRadius server or not
Creating WLANwith Radius serverand connectingclient
EWCJ171S__Reg_17
PassedTo verify whetherClient able to connectGuest WLAN withRadius survivabilityo not
Guest WLAN withRadius survivability
EWCJ171S__Reg_18
PassedTo verify whetherClient able to connectcaptive networkenabled WLAN withRadius survivabilityor not
Captive networkenabled WLANwith Radiussurvivability
EWCJ171S__Reg_19
PassedTo verify whetherClient able to connectMAC filter enabledWLAN with Radiussurvivability or not
MAC filter enabledWLANwith Radiussurvivability
EWCJ171S__Reg_20
PassedTo verify whetherClient able to connectGuest+MACenabledWLAN with Radiussurvivability or not
WPA+WPA2enabled WLANwith Radiussurvivability
EWCJ171S__Reg_21
PassedTo verify whetherClient able to connectGuest+Capative+MACenabled WLAN withRadius survivabilityor not
WPA2+WPA3enabled WLANwith Radiussurvivability
EWCJ171S__Reg_22
PassedTo verify whetherClient able to connectGuest+Capative+MACenabled WLAN withRadius survivabilityor not
Static web enabledWLANwith Radiussurvivability
EWCJ171S__Reg_23
PassedTo verify whetherAVC rules areapplying to WLANwith Radiussurvivability or not
AVC configuredWLANwith Radiussurvivability
EWCJ171S__Reg_24
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )150
Regression Features - Test SummaryAuthentication Survivability Support
PassedTo verify whetherClient is getting theIP address fromDHCP pool or notwith Radiussurvivability
Assigning DHCPRadius survivabilityenabled WLAN
EWCJ171S__Reg_25
PassedTo verify whetherClient is connectingto Hotspot enabledWLAN with Radiussurvivability or not
Enabling FastTransition onWLANwith Radiussurvivability
EWCJ171S__Reg_26
PassedTo verify whetherClient details areshowing proper inISE or not
CheckAuthorizationdetails in ISE
EWCJ171S__Reg_27
PassedTo verify whetherClient are usingcache details or notwhen ISEwent down
Making ISE downand check client isusing cache detailsor not
EWCJ171S__Reg_28
PassedTo verify whetherRadius survivabilitydetails showing ornot after imagedowngrade
Upgrading CiscoCatalyst 9800 SeriesWirelessController-ME andchecking Radiussurvivability details
EWCJ171S__Reg_29
PassedTo verify whetherRadius survivabilitydetails showing ornot after imageDowngrade
Downgrading CiscoCatalyst 9800 SeriesWirelessController-ME andchecking Radiussurvivability details
EWCJ171S__Reg_30
PassedTo verify whetherRadius survivabilitydetails are showingproper or not afterME came UP
Validating Radiussurvivability detailsafter ME down andUP
EWCJ171S__Reg_31
PassedTo verify whetherSecurity details arepossible to change ornot when clientconnected withRadius survivability
Changing Securitydetails after clientconnected to Radiussurvivability
EWCJ171S__Reg_32
PassedTo verify whetherClient is able toconnect with Invalidradius server detailsor not
Configuring InvalidRadius server detailsand trying toconnect clients
EWCJ171S__Reg_33
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )151
Regression Features - Test SummaryAuthentication Survivability Support
PassedTo verify whetherClient is connectingto WLAN withRadius server or not
Creating WLANwith Radius serverand connectingclient
EWLCJ171S_Reg_233
PassedTo verify whetherClient able to connectGuest WLAN withRadius survivabilityo not
Guest WLAN withRadius survivability
EWLCJ171S_Reg_234
PassedTo verify whetherClient able to connectcaptive networkenabled WLAN withRadius survivabilityor not
Captive networkenabled WLANwith Radiussurvivability
EWLCJ171S_Reg_235
PassedTo verify whetherClient able to connectMAC filter enabledWLAN with Radiussurvivability or not
MAC filter enabledWLANwith Radiussurvivability
EWLCJ171S_Reg_236
PassedTo verify whetherClient able to connectGuest+MACenabledWLAN with Radiussurvivability or not
WPA+WPA2enabled WLANwith Radiussurvivability
EWLCJ171S_Reg_237
PassedTo verify whetherClient able to connectGuest+Capative+MACenabled WLAN withRadius survivabilityor not
WPA2+WPA3enabled WLANwith Radiussurvivability
EWLCJ171S_Reg_238
PassedTo verify whetherClient able to connectGuest+Capative+MACenabled WLAN withRadius survivabilityor not
Static web enabledWLANwith Radiussurvivability
EWLCJ171S_Reg_239
PassedTo verify whetherAVC rules areapplying to WLANwith Radiussurvivability or not
AVC configuredWLANwith Radiussurvivability
EWLCJ171S_Reg_240
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )152
Regression Features - Test SummaryAuthentication Survivability Support
PassedTo verify whetherClient is getting theIP address fromDHCP pool or notwith Radiussurvivability
Assigning DHCPRadius survivabilityenabled WLAN
EWLCJ171S_Reg_241
PassedTo verify whetherClient is connectingto Hotspot enabledWLAN with Radiussurvivability or not
Enabling FastTransition onWLANwith Radiussurvivability
EWLCJ171S_Reg_242
PassedTo verify whetherClient details areshowing proper inISE or not
CheckAuthorizationdetails in ISE
EWLCJ171S_Reg_243
PassedTo verify whetherClient are usingcache details or notwhen ISEwent down
Making ISE downand check client isusing cache detailsor not
EWLCJ171S_Reg_244
PassedTo verify whetherRadius survivabilitydetails showing ornot after imagedowngrade
Upgrading CiscoCatalyst 9800 SeriesWireless Controllerand checkingRadiussurvivability details
EWLCJ171S_Reg_245
PassedTo verify whetherRadius survivabilitydetails showing ornot after imageDowngrade
Downgrading CiscoCatalyst 9800 SeriesWireless Controllerand checkingRadiussurvivability details
EWLCJ171S_Reg_246
PassedTo verify whetherRadius survivabilitydetails are showingproper or not afterME came UP
Validating Radiussurvivability detailsafter ME down andUP
EWLCJ171S_Reg_247
PassedTo verify whetherSecurity details arepossible to change ornot when clientconnected withRadius survivability
Changing Securitydetails after clientconnected to Radiussurvivability
EWLCJ171S_Reg_248
PassedTo verify whetherClient is able toconnect with Invalidradius server detailsor not
Configuring InvalidRadius server detailsand trying toconnect clients
EWLCJ171S_Reg_249
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )153
Regression Features - Test SummaryAuthentication Survivability Support
Master AP Failover IssuesDefect IDStatusDescriptionTitleLogical ID
PassedTo verify whetherNext preferredMaster AP canchanging the CiscoCatalyst 9800 SeriesWireless ControllerME or not by usingthe UI
Changing the nextpreferred CiscoCatalyst 9800 SeriesWireless ControllerME capable AP toController from UI
EWCJ171S__Reg_218
PassedTo verify whetherNext preferredMaster AP canchanging the CiscoCatalyst 9800 SeriesWireless ControllerME or not by usingthe CLI
Changing the nextpreferred CiscoCatalyst 9800 SeriesWireless ControllerME capable AP toController fromCLI
EWCJ171S__Reg_219
PassedTo verify whethermore than 5 Aps arechanging the state toCisco Catalyst 9800Series WirelessController MEcapable or not
Making the Morethan 5 Aps to CiscoCatalyst 9800 SeriesWireless ControllerME capable
EWCJ171S__Reg_220
PassedTo verify whetherMaster preferredAPis deleting fromCLIor not
Deleting the MasterPrepared AP fromCLI
EWCJ171S__Reg_221
PassedTo verify whetherDHCP server IPaddress is assign tothe Controller andcome up with sameIP address or not
Configuring theController IPaddress with DHCPserver
EWCJ171S__Reg_222
PassedTo verify whetherGlobal APConfigurationsauthenticate to theAP or not
Assigning theGlobal APConfigurations
EWCJ171S__Reg_223
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )154
Regression Features - Test SummaryMaster AP Failover Issues
Intelligent Capture-eWCDefect IDStatusDescriptionTitleLogical ID
PassedTo verify the packetcapture for Androidclient usingIntelligent capture inCampgroup
Packet capture forAndroid client usingIntelligent Captureoption inCampgroup
EWCJ171S__Reg_74
PassedTo verify the packetcapture forWindows clientusing Intelligentcapture inCampgroup
Packet capture forWindows JOS clientusing IntelligentCapture option inCampgroup
EWCJ171S__Reg_75
PassedTo verify the packetcapture for IOSclient usingIntelligent capture inCampgroup
Packet capture forIOS client usingIntelligent Captureoption inCampgroup
EWCJ171S__Reg_76
PassedTo verify the packetcapture forMACOSclient usingIntelligent capture inCampgroup
Packet capture forMac OS client usingIntelligent Captureoption inCampgroup
EWCJ171S__Reg_77
PassedTo capture thePacket of the clientwhen the client isconnected to APwith radio as 2.4GHz in CiscoCatalyst 9800 SeriesWireless ControllerME
Packet capture ofclient when theclient is connectedto AP with 2.4 GHz
EWCJ171S__Reg_78
PassedTo capture thePacket of the clientwhen the client isconnected to APwith radio as 5 GHzinCisco Catalyst9800 SeriesWireless ControllerME
Packet capture ofclient when theclient is connectedto AP with 5 GHz
EWCJ171S__Reg_79
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )155
Regression Features - Test SummaryIntelligent Capture-eWC
PassedTo capture packetwhen the client isconnected to the iOSAP with security asOPEN in CiscoCatalyst 9800 SeriesWireless ControllerME
Capturing of Packetof the client whenthe client isconnectedwith opensecurity
EWCJ171S__Reg_80
PassedTo capture packetwhen the client isconnected to the iOSAP with security asWPA 2 PSK inCisco Catalyst 9800Series WirelessController ME
Capturing of Packetof the client whenthe client isconnected withWPA 2 PSKsecurity
EWCJ171S__Reg_81
PassedTo capture packetwhen the client isconnected to the iOSAP with security asWPA 2 Enterprise inCisco Catalyst 9800Series WirelessController ME
Capturing of Packetof the client whenthe client isconnected withWPA 2 Enterprisesecurity
EWCJ171S__Reg_82
PassedTo capture packetwhen the client isconnected to the APwith security asCaptive portal-webconsent
Capturing of Packetof the client whenthe client isconnected withcaptive portal-webconsent
EWCJ171S__Reg_83
PassedTo verify the packetcapture forAnyconnect clientusing Intelligentcapture inCampgroup page
Packet capture forAnyconnect clientusing IntelligentCapture option inCampgroup page
EWCJ171S__Reg_84
PassedTo verify the packetcapture forWindows JOS clientusing Intelligentcapture in AP page
Packet capture forWindows JOS clientusing IntelligentCapture option inAP page
EWCJ171S__Reg_85
PassedTo verify the packetcapture for Androidclient usingIntelligent capture inAP page
Packet capture forAndroid client usingIntelligent Captureoption in AP page
EWCJ171S__Reg_86
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )156
Regression Features - Test SummaryIntelligent Capture-eWC
PassedTo verify the packetcapture for iOSclient usingIntelligent capture inAP page
Packet capture foriOS client usingIntelligent Captureoption in AP page
EWCJ171S__Reg_87
PassedTo verify the packetcapture for MacOSclient usingIntelligent capture inAP page
Packet capture forMacOS client usingIntelligent Captureoption in AP page
EWCJ171S__Reg_88
PassedTo verify the packetcapture forAnyconnect clientusing Intelligentcapture in AP page
Packet capture forAnyconnect clientusing IntelligentCapture option inAP page
EWCJ171S__Reg_89
Captive Portal with Internal, ExternalDefect IDStatusDescriptionTitleLogical ID
PassedTo check whetherJOS client getsassociatedsuccessfully or notto a WLAN inwhich captive portalenabled as Internalsplash page withmapping usernameas Email address
Configuring theEmail address inInternal /Externalsplash page andassociating differenttypes clients to aWLAN
EWLCJ171S_Reg_95
PassedTo check whetherJOS client getsassociatedsuccessfully or notto a WLAN inwhich captive portalenabled as Internalsplash page withmapping access typeas Web consent
Configuring theWeb Consent inInternal/Externalsplash page andassociating JOSclients to a WLAN
EWLCJ171S_Reg_96
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )157
Regression Features - Test SummaryCaptive Portal with Internal, External
PassedTo check whetherMacOS clients getassociatedsuccessfully or notto a WLAN inwhich captive portalmapped toInternal/externalsplash page withaccess type Emailaddress
Associating MacOSclients to a WLANwith captive portaland mac filteringenabled
EWLCJ171S_Reg_97
PassedTo check whetherMacOS clients getassociatedsuccessfully or notto a WLAN byproviding invalidemail address asusername duringcaptive portalmapped tointernal/externalsplash page
Associating MacOSclients to a WLANcreated with UTF-8Char with providinginvalid emailaddress as username
EWLCJ171S_Reg_98
Lobby AmbassadorDefect IDStatusDescriptionTitleLogical ID
PassedTo verify the userable to login GUIwith the lobby usercredentials.
Create and verifyLobby user accountand try to login GUIwith lobbycredentials.
EWLCJ171S_Reg_26
PassedTo verify the userable to login GUIwith the all 3 lobbyuser credentials withdifferent browsers.
Create 3 lobby usersand try to login GUIwith all 3 lobbyusers with differentbrowsers.
EWLCJ171S_Reg_27
PassedTo verify the userable to login GUIwith the deletedlobby usercredentials .
Delete the Createdlobby users and tryto login GUI withlobby usercredentials.
EWLCJ171S_Reg_28
PassedTo verify the userable to login CLIwith the lobbycredentials.
Create the Lobbyuser and try to loginCLI with lobbycredentials.
EWLCJ171S_Reg_29
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )158
Regression Features - Test SummaryLobby Ambassador
PassedTo verify the userable to login CLIwith the all 3 lobbycredentials withTelnet
Create 3 lobby usersand try to login CLIwith all 3 lobbyusers with Telnet.
EWLCJ171S_Reg_30
PassedTo verify the userable to login CLIwith the all 3 lobbycredentials withSSH
Create 3 lobby usersand try to login CLIwith all 3 lobbyusers with SSh
EWLCJ171S_Reg_31
PassedTo verify the userable to login CLIwith the deletedlobby usercredentials .
Delete the Createdlobby users and tryto login CLI withlobby usercredentials.
EWLCJ171S_Reg_32
PassedTo verify the Userable to login withLobby credentials
Create and verify thelobby user in CLI
EWLCJ171S_Reg_33
AP 4800 SupportDefect IDStatusDescriptionTitleLogical ID
PassedTo associate 4800AP to CiscoCatalyst 9800 SeriesWireless Controllerwith latest imageand check if the APgets associated ornot
Association of 4800AP with differentCisco Catalyst 9800Series WirelessController model
EWLCJ171S_Reg_158
PassedTo associate 4800AP with differentcountry code andcheck if the AP doesnot get joined toCisco Catalyst 9800Series WirelessController
Associating 4800AP with differentcountry code as withCisco Catalyst 9800Series WirelessController
EWLCJ171S_Reg_159
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )159
Regression Features - Test SummaryAP 4800 Support
PassedTo configure APwith a duplicate IPaddress and check ifthe AP shows errormessage and APdoes not join theCisco Catalyst 9800Series WirelessController
Configuring APwith duplicate IP
EWLCJ171S_Reg_160
PassedTo check if the APwith MICauthorization alonejoins the controllerand check if otherAP do not join
Check if the APwith MICauthorization alonejoins the CiscoCatalyst 9800 SeriesWireless Controller
EWLCJ171S_Reg_161
PassedTo check if the APgets Rebooted or notand check if the APjoins the controlleragain.
Rebooting the 4800AP
EWLCJ171S_Reg_162
PassedTo reboot the AP bygiving the primarycontroller IP usinghigh availability andcheck if the APjoins the primarycontroller
Rebooting the APwith primarycontroller given inHigh Availability
EWLCJ171S_Reg_163
PassedTo check the detailsof the AP using CLIand check if thedetails are correctlyshown or not
Checking the detailsof the AP throughthe CLI
EWLCJ171S_Reg_164
PassedTo connect awindow client to theAP and check if theclient getsconnected to the APwithout any errors.
Connecting aWindow client tothe 4800 AP
EWLCJ171S_Reg_165
PassedTo connect aAndroid client to theAP and check if theclient getsconnected to the APwithout any errors.
Connecting aAndroid client to the4800 AP
EWLCJ171S_Reg_166
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )160
Regression Features - Test SummaryAP 4800 Support
PassedTo connect a IOSclient to the AP andcheck if the clientgets connected tothe AP without anyerrors.
Connecting a IOSclient to the 4800AP
EWLCJ171S_Reg_167
PassedTo connect a MACclient to the AP andcheck if the clientgets connected tothe AP without anyerrors.
Connecting a MACclient to the 4800AP
EWLCJ171S_Reg_168
PassedTo configure 802.1xSupplicantCredentials for APand check if thecredentials workcorrectly or not
Configure 802.1xSupplicantCredentials for 4800AP
EWLCJ171S_Reg_169
PassedTo check APfailover prioritywith critical andcheck if the AP getsconnected to thenext controller .
AP failover prioritywith critical
EWLCJ171S_Reg_170
PassedTo check APfailover prioritywith critical andcheck if the AP getsconnected to thenext controller .
AP failover prioritywith High priority
EWLCJ171S_Reg_171
PassedTo check if the APmoves from 3504Cisco Catalyst 9800Series WirelessController to 5520Cisco Catalyst 9800Series WirelessController throughhigh availability.
Moving AP from3504 controller to5520 through Highavailability
EWLCJ171S_Reg_172
PassedTo verify if theclient getsreassociated to theto the AP .
Reassociation ofclient to the AP afterreboot
EWLCJ171S_Reg_173
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )161
Regression Features - Test SummaryAP 4800 Support
PassedTo check if theclient getsconnected to the APafter rebooting theAP and AP joiningthe primarycontroller .wherethere is no sameWLAN
Checking if theclient do notconnect to the APafter rebooting andjoining the primarycontroller
EWLCJ171S_Reg_174
PassedTo check whetherintra controllerroaming ofwindowsclients worksproperly or not inCisco Catalyst 9800Series WirelessController
Performing Intracontroller roamingof Windows J OSclient
EWLCJ171S_Reg_175
PassedTo check whetherintra controllerroaming of Androidclients worksproperly or not
Performing Intracontroller roamingof Android client
EWLCJ171S_Reg_176
PassedTo check whetherintra controllerroaming of IOSclients worksproperly or not inCisco Catalyst 9800Series WirelessController
Performing Intracontroller roamingof IOS client
EWLCJ171S_Reg_177
PassedTo check whetherintra controllerroaming of MacOSclients worksproperly or not
Performing Intracontroller roamingof Mac OS client
EWLCJ171S_Reg_178
PassedTo check whetherinter controllerroaming ofwindowsclients worksproperly or not
Performing Intercontroller roamingof Windows J OSclient
EWLCJ171S_Reg_179
PassedTo check whetherinter controllerroaming of Androidclients worksproperly or not
Performing Intercontroller roamingof Android client
EWLCJ171S_Reg_180
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )162
Regression Features - Test SummaryAP 4800 Support
PassedTo check whetherinter controllerroaming of IOSclients worksproperly or not
Performing Intercontroller roamingof IOS client
EWLCJ171S_Reg_181
PassedTo check whetherinter controllerroaming of Mac OSclients worksproperly or not
Performing Intercontroller roamingof Mac OS client
EWLCJ171S_Reg_182
PassedTo change the modeof AP from localmode to Flexconnect mode andcheck if the AP doesnot reboot.
Change AP modefrom local to Flexconnect in 4800 AP.
EWLCJ171S_Reg_183
PassedTo check if the APreboots when APmode is changedfrom flex connect toLocal mode .
Changing the APfrom Flex connectto Local mode andcheck if the APreboot
EWLCJ171S_Reg_184
PassedTo add two 4800AP in AP group andmap a WLAN togroup and connect aclient to the WLANand check the clientconnectivity
Adding two 4800AP in the AP groupand connecting aclient to the APwithspecific WLAN
EWLCJ171S_Reg_185
PassedTo add 4800 Ap toFlex Connect groupand check if the APgets added to the APgroup
Adding 4800 AP inthe Flex Connectgroup andconnecting a clientto the AP withspecific WLAN
EWLCJ171S_Reg_186
PassedTo check if FlexConnect LocalSwitching and LocalAuth works in 4800Ap and check if theclients gets locallyauthenticated andswitched locally
Checking FlexConnect LocalSwitching and LocalAuth worksproperly
EWLCJ171S_Reg_187
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )163
Regression Features - Test SummaryAP 4800 Support
PassedTo check if a correctME image isupgraded to 4800AP and check if itreboots in the day 0config
Upgrading a correctME image to the4800 AP and checkif the ME image isupgraded
EWLCJ171S_Reg_188
PassedTo check if MEimage is upgradingwith the wrong MEimage or not
Upgrading aincorrect ME imageto the 4800 AP andcheck if the MEimage is upgrading
EWLCJ171S_Reg_189
PassedTo verify if theWindow J OSclients getsconnected to theMEimage Upgraded4800 AP
Connecting aWindow J OS clientto the ME imageupgraded 4800 AP
EWLCJ171S_Reg_190
PassedTo verify if theAndroid clients getsconnected to theMEimage Upgraded4800 AP
Connecting aAndroid client to theME image upgraded4800 AP
EWLCJ171S_Reg_191
PassedTo verify if the IOSclients getsconnected to theMEimage Upgraded4800 AP
Connecting a IOSclient to the MEimage upgraded4800 AP
EWLCJ171S_Reg_192
PassedTo verify if the MacOS clients getsconnected to theMEimage Upgraded4800 AP
Connecting a MacOS client to the MEimage upgraded4800 AP
EWLCJ171S_Reg_193
PassedTo convert the 4800AP into autonomousAP and check if theAP is converted intoautonomous AP ornot
Converting the 4800AP to a autonomousAP
EWLCJ171S_Reg_194
PassedTo connect client to4800 AP withdifferent channelwidth and check ifthe clients getsconnected to thedifferent ChannelWidth .
Connecting client to4800 AP withdifferent ChannelWidth
EWLCJ171S_Reg_195
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )164
Regression Features - Test SummaryAP 4800 Support
PassedTo connect a clientenabling the Indianextended channelsand check if theclients is connectedin the channelallocated for theextended one or not.
Connecting a clientusing Indianextended channelsenabled in DCAchannels.
EWLCJ171S_Reg_196
PassedTo verify theAP-Pre downloadwith primary imagesis successful or not.
Verifying AP-ImagePre-download withprimary image tothe 4800 AP
EWLCJ171S_Reg_197
PassedTo verify theAP-Pre downloadwith primary imagesis successful or not.
Verifying AP-ImagePre-download withprimary image tothe 4800 AP
EWLCJ171S_Reg_198
WPA3 SupportDefect IDStatusDescriptionTitleLogical ID
PassedTo verify the WPA3support with SAEsecurityConfiguration.
Verifying theWPA3support with SAEsecurity key.
EWLCJ171S_Reg_45
PassedTo verify the theClient packets byconnecting thewindows client toWPA3 and SAEsupported SSID
Verifying theWPA3support with SAEsecurity key byconnecting thewindows client.
EWLCJ171S_Reg_46
PassedTo verify the theClient packets byconnecting theAndroid client toWPA3 and SAEsupported SSID
Verifying theWPA3support with SAEsecurity key byconnecting theAndroid client.
EWLCJ171S_Reg_47
PassedTo verify the theClient packets byconnecting the Macos client to WPA3and SAE supportedSSID
Verifying theWPA3support with SAEsecurity key byconnecting the Macos client.
EWLCJ171S_Reg_48
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )165
Regression Features - Test SummaryWPA3 Support
PassedTo verify the Clientpackets byconnecting the clientto WPA3 and SAEand PSK supportedSSID
Verifying theWPA3support with SAEand PSK securitykey.
EWLCJ171S_Reg_49
PassedTo verify the WPA3Configuration withSAE and 802.1xsupported SSID
Verifying theWPA3support with SAEand 802.1x securitykey.
EWLCJ171S_Reg_50
PassedTo verify the WPA3support with SAEand Layer3 Splashpage web redirect
Validating theWPA3 support withSAE and Layer 3Splash page webredirect
EWLCJ171S_Reg_51
PassedTo verify the WPA3support with SAEand Layer3 On Macfilter failure
Validating theWPA3 support withSAE and Layer 3OnMac filter failure.
EWLCJ171S_Reg_52
PassedTo verify the WPA3support with SAEand PMF PSK Authkey.
verifying the WPA3support with SAEand PMF PSK Authkey.
EWLCJ171S_Reg_53
PassedTo verify the WPA3support with SAEand PSK Auth keyand Layer3 Splashpage web redirect.
verifying the WPA3support with SAEand PSK Auth keyand Layer3 Splashpage web redirect.
EWLCJ171S_Reg_54
PassedTo verify the WPA3support with 802.1xsecurity for thedifferent clients.
Verifying theWPA3support with 802.1xsecurity.
EWLCJ171S_Reg_55
PassedTo verify the WPA3support with 802.1xand CCKM securityfor the differentclients.
Verifying theWPA3support with 802.1xand CCKM security.
EWLCJ171S_Reg_56
PassedTo verify the WPA3support with+Ft_802.1x securityfor the differentclients.
Verifying theWPA3support withFt+802.1x security.
EWLCJ171S_Reg_57
PassedTo verify the Intraclient roaming byusingWPA3 supportwith 9115AP
Verifying theWPA3support with Intraclient roaming byusing 9115AP
EWLCJ171S_Reg_58
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )166
Regression Features - Test SummaryWPA3 Support
PassedTo verify interWLCRoaming betweenWLANswithWPA3support and SAEsupport
Verifying theWPA3support and SAEsecurity with InterWLC Roaming
EWLCJ171S_Reg_59
PassedTo verify whetherClient is Movingbetween Controllerswith Different Radiotype or not withWPA3 WLAN.
Verifying theWPA3support withRoaming betweenControllers withDifferent Radiotypes
EWLCJ171S_Reg_60
PassedTo verify whetherClient is Movingbetween Controllerswith same Radiotype or not withWPA3 WLAN.
Verifying theWPA3support Roamingbetween Controllerswith same Radiotypes
EWLCJ171S_Reg_61
OWE SupportDefect IDStatusDescriptionTitleLogical ID
PassedTo verify the OWEAuth key support tothe WPA3 securityfor the Windowsclient.
Verifying WPA3and OWE supportfor the Windowsclient
EWLCJ171S_Reg_62
PassedTo verify the OWEAuth key support tothe WPA3 securityfor the Androidclient.
Verifying WPA3and OWE supportfor the Androidclient
EWLCJ171S_Reg_63
PassedTo verify the OWEAuth key support tothe WPA3 securityfor the Mac osclient.
Verifying WPA3and OWE supportfor theMac os client
EWLCJ171S_Reg_64
PassedTo verify theOWE-Transitionmode support to theWPA3 security forthe Windows client.
Verifying WPA3andOWE-Transitionmode support for theWindows client
EWLCJ171S_Reg_65
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )167
Regression Features - Test SummaryOWE Support
PassedTo verify theOWE-Transitionmode support to theWPA3 security forthe Android client.
Verifying WPA3andOWE-Transitionmode support for theAndroid client
EWLCJ171S_Reg_66
PassedTo verify theOWE-Transitionmode support to theWPA3 security forthe Mac os client.
Verifying WPA3andOWE-Transitionmode support for theMac os client
EWLCJ171S_Reg_67
PassedTo check the Clientpackets byconnecting the clientto WPA3 and OWEsupport SSID withLayer3 Splash pageWeb redirect.
Checking theWPA3and OWE supportwith Layer3 Splashpage web redirect
EWLCJ171S_Reg_68
PassedTo verify the WPA3and OWE SupportwithOWE transitionmode and Layer3OnMac filter failure.
Verifying theWPA3and OWE Supportwith Layer3OnMacfilter failure.
EWLCJ171S_Reg_69
PassedTo verify interWLCRoaming betweenWLANswithWPA3support and OWEsupport
Verifying theWPA3support with OWEsecurity with InterWLC Roaming
EWLCJ171S_Reg_70
PassedTo verify the Intraclient roaming byusingWPA3 supportwith 9115AP
Verifying theWPA3support and OWEwith Intra clientroaming by using9115AP
EWLCJ171S_Reg_71
PassedTo verify interWLCRoaming betweenWLANswithWPA3support and OWEsupport
Verifying theWPA3support and OWEsecurity with InterWLC Roaming
EWLCJ171S_Reg_72
PassedTo verify whetherClient is Movingbetween Controllerswith Different Radiotype or not withWPA3 WLAN.
Verifying theWPA3and OWE supportwith Roamingbetween Controllerswith Different Radiotypes
EWLCJ171S_Reg_73
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )168
Regression Features - Test SummaryOWE Support
PassedTo verify whetherClient is Movingbetween Controllerswith same Radiotype or not withWPA3 WLAN.
Verifying theWPA3and OWE supportRoaming betweenControllers withsame Radio types
EWLCJ171S_Reg_74
Best Practices WebUIDefect IDStatusDescriptionTitleLogical ID
PassedVerify the web UI isable to open or notthrough http/httpsafter modification
Enable/Disable thehttp/https formanagement
EWLCJ171S_Reg_75
PassedTo check whetherNTP server is ableto configure or notfor WEB UI
Configure the NTPserver
EWLCJ171S_Reg_76
PassedTo check whetherClient ExclusionPolicies is enabledor not
Configure the ClientExclusionpolicies[fix button isnot available need tocheck in latest build]
EWLCJ171S_Reg_77
PassedVerify the WLANwith WPA2 afterconfiguring via bestpractice
Create the WLANwith WPA2
EWLCJ171S_Reg_78
PassedChecking the UserLogin Policies isenabled or not
Enable the UserLogin Policies
EWLCJ171S_Reg_79
PassedVerify the enabledLocal Profile onActive WLAN
Enable the LocalProfiling on one ormore activeWLANs
EWLCJ171S_Reg_80
PassedTo check whetherclient Band isapplied or not forActive WLANs
Configure the clientband for all ActiveWLANs
EWLCJ171S_Reg_81
PassedVerify the 5ghzclient band on activeWLANs
Enable the 5ghzband for ActiveWLAN
EWLCJ171S_Reg_82
PassedChecking the 2.4ghzclient band on activeWLANs
Enable the 2.4ghzband for ActiveWLAN
EWLCJ171S_Reg_83
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )169
Regression Features - Test SummaryBest Practices WebUI
PassedTo check whetherBest channel widthis configured or noton both radios
Configure the Bestchannel width
EWLCJ171S_Reg_84
PassedTo check whetherFlexible RadioAssignment isenabled or not
Enable the FlexibleRadio Assignment
EWLCJ171S_Reg_85
PassedVerify the Loadbalance enabled ornot on ActiveWLAN
Configure the Loadbalance for one ormore active WLAN
EWLCJ171S_Reg_86
PassedTo check whetherglobal channel isenabled or not
Enable the AutoDynamic ChannelAssignment
EWLCJ171S_Reg_87
Image PredownloadDefect IDStatusDescriptionTitleLogical ID
PassedVerifying CiscoCatalyst 9800 SeriesWireless Controllersoftware updating ornot via SFTP server
Cisco Catalyst 9800Series WirelessController Softwareupdating via SFTPserver
EWLCJ171S_Reg_302
PassedVerifying CiscoCatalyst 9800 SeriesWireless Controllersoftware updating ornot via SFTP server
Invalid CiscoCatalyst 9800 SeriesWireless ControllerSoftware updatingvia SFTP server.
EWLCJ171S_Reg_303
PassedVerifying CiscoCatalyst 9800 SeriesWireless Controllersoftware updating ornot via SFTP serverusing differentbrowser.
Cisco Catalyst 9800Series WirelessController Softwareupdating via SFTPserver usingdifferent browser.
EWLCJ171S_Reg_304
PassedChecking theCiscoCatalyst 9800 SeriesWireless Controllersoftware updating ornot via tftp server
Software updatingvia tftp server
EWLCJ171S_Reg_305
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )170
Regression Features - Test SummaryImage Predownload
PassedVerifying CiscoCatalyst 9800 SeriesWireless Controllersoftware updating ornot via SFTP server
Cisco Catalyst 9800Series WirelessController Softwareupdating via SFTPserver using 9880port.
EWLCJ171S_Reg_306
PassedVerifying CiscoCatalyst 9800 SeriesWireless Controllersoftware updating ornot via SFTP server
Cisco Catalyst 9800Series WirelessController Softwareupdating via SFTPserver using 9840port.
EWLCJ171S_Reg_307
PassedTo check whetherCisco Catalyst 9800Series WirelessController softwareupgrading or not viatftp server
Invalid CiscoCatalyst 9800 SeriesWireless ControllerSoftware updatingvia tftp server
EWLCJ171S_Reg_308
PassedVerifyingCiscoCatalyst 9800 SeriesWireless Controllersoftware isupgrading or notthrough InvalidSFTP username/password
Cisco Catalyst 9800Series WirelessController Softwareupgrading throughInvalid SFTP username/password
EWLCJ171S_Reg_309
PassedChecking CiscoCatalyst 9800 SeriesWirelessControllersoftwareupgrading or notthrough invalid tftpfile path
Cisco Catalyst 9800Series WirelessController softwareupgrading throughinvalid tftp file path
EWLCJ171S_Reg_310
PassedChecking CiscoCatalyst 9800 SeriesWireless Controllersoftware upgradingor not through validtftp file path
Cisco Catalyst 9800Series WirelessController softwareupgrading throughvalid tftp file pathusing 9880 port
EWLCJ171S_Reg_311
PassedChecking CiscoCatalyst 9800 SeriesWireless Controllersoftware upgradingor not through validtftp file path
Cisco Catalyst 9800Series WirelessController softwareupgrading throughvalid tftp file path9840
EWLCJ171S_Reg_312
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )171
Regression Features - Test SummaryImage Predownload
PassedVerifying CiscoCatalyst 9800 SeriesWireless Controllersoftware upgradingor not viaDesktop(HTTP)server
Cisco Catalyst 9800Series WirelessControllerSoftwareupgrading viaDesktop(HTTP)
EWLCJ171S_Reg_313
PassedVerifying CiscoCatalyst 9800 SeriesWireless Controllersoftware upgradingor not viaDesktop(HTTP)mode
Invalid CiscoCatalyst 9800 SeriesWireless ControllerSoftware updatingvia Desktop(HTTP)mode
EWLCJ171S_Reg_314
PassedVerifying CiscoCatalyst 9800 SeriesWireless Controllersoftware upgradingor not via webserver
ME Softwareupgrading viawebserver
EWLCJ171S_Reg_315
PassedTo check whetherInvalid CiscoCatalyst 9800 SeriesWireless Controllersoftware upgradingor not via webserver
Invalid CiscoCatalyst 9800 SeriesWireless ControllerSoftware updatingvia webserver
EWLCJ171S_Reg_316
PassedVerifying CiscoCatalyst 9800 SeriesWireless Controllersoftware upgradingor not via webserverusing differentbrowser.
ME Softwareupgrading viawebserver usingdifferent browser
EWLCJ171S_Reg_317
Image Download Method : HTTP UploadDefect IDStatusDescriptionTitleLogical ID
PassedVerifying CiscoCatalyst 9800 SeriesWireless Controller-ME softwareimages upgrading ornot via HTTPUpload
Cisco Catalyst 9800Series WirelessController Softwareimages upgradingvia HTTP Upload
EWLCJ171S_Reg_256
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )172
Regression Features - Test SummaryImage Download Method : HTTP Upload
PassedVerifying CiscoCatalyst 9800 SeriesWirelessController-MEinvalid controllerimage is upgradingor not via HTTPserver
Invalid CiscoCatalyst 9800 SeriesWireless ControllerController imageupgrading viaHTTPserver
EWLCJ171S_Reg_257
PassedVerifying CiscoCatalyst 9800 SeriesWireless Controllerinvalid AP image isupgrading or not viaHTTP server
Invalid CiscoCatalyst 9800 SeriesWireless ControllerAP image upgradingvia HTTP server
EWLCJ171S_Reg_258
PassedTo check whethersoftware image areupgrading or notthrough differentAP Models
Joining differentmodel AP to CiscoCatalyst 9800 SeriesWireless Controllerand upgrade thedevice with latestimage
EWLCJ171S_Reg_259
PassedTo check whethersoftware images areDowngrading or notthrough differentAP Models
Joining differentmodel AP's to CiscoCatalyst 9800 SeriesWireless Controllerand downgrade theimage
EWLCJ171S_Reg_260
PassedVerifying CiscoCatalyst 9800 SeriesWireless Controllerdevice is upgradingor not with wrongimage and check theerror message
Upgrading CiscoCatalyst 9800 SeriesWireless Controllercontroller withwrong image andchecking the errormessage
EWLCJ171S_Reg_261
PassedVerifying CiscoCatalyst 9800 SeriesWireless Controllerdevice is upgradingor not with wrongAP image and checkthe error message
Upgrading CiscoCatalyst 9800 SeriesWirelessControllerwithwrong AP imageand checking theerror message
EWLCJ171S_Reg_262
PassedVerifying CiscoCatalyst 9800 SeriesWireless Controllersoftware isupgrading or notwith controllerimage alone
Upgrading CiscoCatalyst 9800 SeriesWireless Controllercontroller imagealone and checkingthe error messages
EWLCJ171S_Reg_263
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )173
Regression Features - Test SummaryImage Download Method : HTTP Upload
PassedVerifying CiscoCatalyst 9800 SeriesWireless Controllersoftware isupgrading or notwith AP imagealone
Upgrading CiscoCatalyst 9800 SeriesWireless ControllerAP image alone andchecking the errormessages
EWLCJ171S_Reg_264
PassedTo check whetheruser getting anycrash log whileupgrading withlatest image
Upgrading the CiscoCatalyst 9800 SeriesWireless Controllerwith latest imageand checking if anycrash happen
EWLCJ171S_Reg_265
PassedTo check whetheruser getting anycrash log whileDowngrading withlatest image
Downgrading theCisco Catalyst 9800Series WirelessController withlatest image andchecking if anycrash happen
EWLCJ171S_Reg_266
PassedTo check whetherany memory leakswhile upgradingwith Cisco Catalyst9800 SeriesWireless Controllerimage
Checking thememory leaks whileupgrading the CiscoCatalyst 9800 SeriesWireless Controller
EWLCJ171S_Reg_267
PassedTo check whetherany memory leakswhile downgradingwith Cisco Catalyst9800 SeriesWireless Controllerimage
Checking thememory leaks whileDowngrading theCisco Catalyst 9800Series WirelessController
EWLCJ171S_Reg_268
PassedTo check whetherany interrupted errormessages coming ornot while upgradingCisco Catalyst 9800Series WirelessController Image
Checking the Errormessages whileupgrading the CiscoCatalyst 9800 SeriesWireless Controller
EWLCJ171S_Reg_269
PassedTo Check whetherthe behaviour of APwhile moving fromWLC to CiscoCatalyst 9800 SeriesWireless Controller
Checking thebehaviour of APwhile moving fromWLC toCiscoCatalyst 9800 SeriesWireless Controller
EWLCJ171S_Reg_270
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )174
Regression Features - Test SummaryImage Download Method : HTTP Upload
Config WirelessDefect IDStatusDescriptionTitleLogical ID
CSCvs40319FailedTo verify theWLANconfiguration withPSK and Ft-802.1xAKM's
Verify the WLANconfiguration withPSK and Ft-802.1xAKM's
EWLCJ171S_config_1
PassedTo verifying thebehaviour of 1810AP
Verify thebehaviour of1810AP in CiscoCatalyst 9800 SeriesWireless Controller
EWLCJ171S_config_2
CSCvs47124FailedTo verifying thestatic-WEPconfiguration with104 key
Static-WEPconfiguration with104 key throwserror.
EWLCJ171S_config_6
CSCvs43516FailedTo observingmemory leakage inC9800-L-C-K9
Observed memoryleakage inC9800-L-C-K9
EWLCJ171S_config_13
SR CasesDefect IDStatusDescriptionTitleLogical ID
PassedTo verify whether userable to see the WLANinformation whenmapped policies
Mapping multipleWLAN's to policiesand verify same inrunningconfiguration
EWLCJ171S_SR_01
PassedTo verify WLAN'sinformation in runningconfiguration aftermapping policy to AP
Mapping policy toAP and checkingfor theconfiguration inrunningconfiguration
EWLCJ171S_SR_02
PassedTo check WLAN'sinformation aftermapping policy tomultiple Aps
Mapping policy tomultiple AP's andchecking for theconfiguration inrunning config
EWLCJ171S_SR_03
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )175
Regression Features - Test SummaryConfig Wireless
PassedTo verify the APconfiguration details instandby switch afterprimary down
Checking the APconfigurationdetails afterswitchover scenario
EWLCJ171S_SR_04
PassedTo verify the APconfiguration detailsafter AP reloadedmultiple time
Reloading the APmultiple times andchecking for theconfigurationdetails
EWLCJ171S_SR_05
PassedTo verify the APconfiguration details instandby switch afterenable/disable the APconfig
Enable/disable theAP all configurationparameter (RadioCore Mode, StaticIp Failover) andcheck for same afterthe switchover
EWLCJ171S_SR_06
PassedTo verify whether day0AP Joins controllerwithout PnP or not
Joining day0 AP tothe controllerwithout PnPconfiguration
EWLCJ171S_SR_07
PassedTo verify whether APjoining to controllerafter reset theconfiguration
Resetting the APand joining to thecontroller withoutPnP configuration
EWLCJ171S_SR_08
PassedTo verify whether APjoining to controllerafter PnP donesuccessfully
Doing PnPsuccessfully andjoining AP to thecontroller
EWLCJ171S_SR_09
PassedTo verify whether clientconnecting to flexconnect APwith 802.1xsecurity or not
Checking the802.1x clientconnectionwith flexCOS/IOS AP after
EWLCJ171S_SR_10
PassedTo check the connected802.1x clientauthentication after thedeviceupgrade/downgrade
Upgrade/downgradethe Cisco Catalyst9800 SeriesWireless Controllerand check for the802.1x clientauthentication
EWLCJ171S_SR_11
PassedTo Verify whetherclient connected toradius serversuccessfully after APreloaded
Reload the Flex APand check for the802.1xauthenticated client
EWLCJ171S_SR_12
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )176
Regression Features - Test SummarySR Cases
PassedTo check whetherAndroid client able toassociate the 9115APwith EAP security
Checking theAndroid client byassociating toAP9115 with EAPsecurity methods.
EWLCJ171S_SR_13
PassedTo check whether IOSclient able to associatethe 4800AP with EAPsecurity
Checking the IOSclient by associatingto AP4800 withEAP securitymethods.
EWLCJ171S_SR_14
PassedTo check whetherWindows client able toassociate the 9120APwith EAP security
Checking theWindows client byassociating toAP9120 with EAPsecurity methods.
EWLCJ171S_SR_15
PassedTo check whetherFactory reset happeningor not afterdownloading the configfile from GUI andperforming the CiscoCatalyst 9800 SeriesWireless Controllerpower off/on
Performing theCisco Catalyst 9800Series WirelessController PowerOff/On afterdownloading theconfig file fromGUI and verify thebehaviour.
EWLCJ171S_SR_16
PassedTo check whetherFactory reset happeningor not afterdownloading the configfile and performing theCisco Catalyst 9800Series WirelessController reload
Performing theCisco Catalyst 9800Series WirelessController reloadafter downloadingthe config file andverify thebehaviour.
EWLCJ171S_SR_17
PassedTo check whetherFactory reset happeningor not afterdownloading the configfile from Cisco Catalyst9800 Series WirelessController-HA deviceGUI and performing theCisco Catalyst 9800Series WirelessController power off/on
Performing theCisco Catalyst 9800Series WirelessController PowerOff/On for HA afterdownloading theconfig file fromGUI and verify thebehaviour.
EWLCJ171S_SR_18
PassedTo check whether9115AP got crashed ornot in Flex/local modewith 80/160Mhzbandwidth
Verify the 9115APbehaviour inFlex/local modewith 80/160Mhzbandwidth
EWLCJ171S_SR_19
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )177
Regression Features - Test SummarySR Cases
PassedTo check whether2800AP got crashed ornot in Flex/local modewith 80/160Mhzbandwidth
Verify the 2800APbehaviour inFlex/local modewith 80/160Mhzbandwidth
EWLCJ171S_SR_20
PassedTo check whether3702AP got crashed ornot in Flex/local modewith 80/160Mhzbandwidth
Verify the 3702APbehaviour inFlex/local modewith 80/160Mhzbandwidth
EWLCJ171S_SR_21
PassedTo checkwhether CiscoCatalyst 9800 SeriesWireless Controller HAfailover happening ornot by changing theActive switch priority.
Change the Activeswitch Priority andobserve the CiscoCatalyst 9800 SeriesWireless ControllerHA.
EWLCJ171S_SR_22
PassedTo checkwhether CiscoCatalyst 9800 SeriesWireless Controller HAfailover happening ornot by changing theActive switch renumber.
Change the Activeswitch renumberand observe theCisco Catalyst 9800Series WirelessController HA.
EWLCJ171S_SR_23
PassedVerify the centraldhcp/central switchingconifg after AP reboot
Create the WLANwith central dhcp/central switching
EWLCJ171S_SR_24
PassedTo check whetherCoverage Areas,Obstacles, LocationRegions are created ornot in MAPS
Create the CoverageAreas, Obstacles,Location Regions insite maps
EWLCJ171S_SR_25
PassedChecking the clientCoverage Areas,Obstacles, LocationRegions in PI floormaps
Verify the clientCoverage Areas,Obstacles, LocationRegions
EWLCJ171S_SR_26
PassedValidate the EWCcontroller isupgrading/downgradingsuccessfully andWAVE2 AP's health
Verify the wave2AP's health aftercontrollerdowngrading/upgrading
EWLCJ171S_SR_27
PassedVerify the 9115 AP toEWC-ME converting ornot
Converting the9115AP toEWC-ME
EWLCJ171S_SR_28
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )178
Regression Features - Test SummarySR Cases
PassedTo check whethersuccessfully userdefined dashboardrenamed or not
Rename the userdefined dashboardin Japanese UI
EWLCJ171S_SR_29
PassedVerify the successfullydefault dashboardrenamed or not
Rename the defaultdashboard inJapanese UI
EWLCJ171S_SR_30
PassedTo check whether SSLcertificate is installedsuccessfully or not inCMX
Install the new SSLcertificate in CMX
EWLCJ171S_SR_31
PassedTo verify the clientconnectivity aftermaster failover
Configuring HASetup check theclient connectivityafter master failover
EWLCJ171S_SR_32
PassedTo verify the imageupgrade through TFTPServer after masterfailover
Configuring HASetup andupgrading the imagethrough TFTPserver
EWLCJ171S_SR_33
PassedTo verify whetherRadius server detailsshowing or not afterimage Downgrade
Downgrading CiscoCatalyst 9800 SeriesWirelessController-ME andchecking Radiusserver details
EWLCJ171S_SR_34
PassedTo verify whetherSecurity details arepossible to change ornot when clientconnected with Radiusserver
Changing Securitydetails after clientconnected to Radiusserver
EWLCJ171S_SR_35
PassedTo verify whetherClient is able to connectwith Invalid radiusserver details or not
Configuring InvalidRadius serverdetails and trying toconnect clients
EWLCJ171S_SR_36
PassedVerify the clientsconnectivity in flexprofile WLAN
Associate themultiple clients tothe flex profileWLAN
EWLCJ171S_SR_37
PassedTo check whether flexprofile is created or noton HA setup
Create the flexprofile on 9800 HAsetup
EWLCJ171S_SR_38
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )179
Regression Features - Test SummarySR Cases
PassedTo check whether theSSL Certificate upload& the client able toconnect or not in CiscoCatalyst 9800 SeriesWireless Controller
Importing SSLCertificate in CiscoCatalyst 9800 SeriesWireless Controller& checking theclient connectivity
EWLCJ171S_SR_39
Passedvalidate the 5ghz clientthroughput in 9115 AP
Verifying the 5ghzclient throughput in9115 AP
EWLCJ171S_SR_40
Passedvalidate the 2.4 ghzclient throughput in9120 AP
Verifying the 2.4ghz clientthroughput in 9120AP
EWLCJ171S_SR_41
PassedVerify the Flex Aclpresenence in c9115flexconenct AP or not
Checking FlexACLpresent or not inc9115 Flex connectAP
EWLCJ171S_SR_42
PassedVerify the Flex Aclpresence in 4800flexconenct AP or not
Checking FlexACLpresent or not in4800 Flex connectAP
EWLCJ171S_SR_43
PassedVerify that Syslog hostremoved from APprofile or not
Removing Syslogserver config fromAP profile
EWLCJ171S_SR_44
PassedVerify that Syslogdisabled from CiscoCatalyst 9800 SeriesWireless Controllerglobally
Disabling Syslog inCisco Catalyst 9800Series WirelessControllerGlobally
EWLCJ171S_SR_45
PassedVerify that there is noDuplex mismatchmessage in switchconsole
Configuring autoduplex for catalystgig port and connectAP
EWLCJ171S_SR_46
PassedVerify that there is noDuplex mismatchmessage in switchconsole
Configuring fullduplex for IOS-XEgig port andAP port
EWLCJ171S_SR_47
PassedVerify theMacOS clientPEM state is'Central_WEB_AUTH'after moving to newCWA config SSID
Verifying MacOSclient PEM statewhile moving clientfromCWA_SSID-1to CWA_SSID-2
EWLCJ171S_SR_48
PassedVerify theMacOS clientPEM state is'CENTRAL_WEB_AUTH'with invalid user
Verifying MacOSclient PEM statewith invalid user
EWLCJ171S_SR_49
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )180
Regression Features - Test SummarySR Cases
PassedVerify theRecommended CCObuild only downloadedin eWC
Downloading theRecommendedCCO build forc9115 eWC
EWLCJ171S_SR_50
PassedVerify the latest CCObuild only downloadedin eWC
Downloading thelatest CCO build forc9115 eWC
EWLCJ171S_SR_51
PassedTo verify the SSHconnection working for1815 AP after changingAP mode
Checking the 1810AP's SSHconnection statusafter changing APmode
EWLCJ171S_SR_52
PassedTo verify that SSHconnection working for9115 AP afterdownload/upload configfile
Checking the 9115AP's SSHconnection statusafterdownload/uploadconfig file
EWLCJ171S_SR_53
PassedTo verify the SSHconnection during theAP roaming.
Checking the clientconnection duringthe roaming of AP.
EWLCJ171S_SR_54
PassedTo verify whether theSSH is enable afterchanging fromconnected to standalone.
Checking the 1810AP's SSHconnection afterchanging fromconnected tostandalone mode.
EWLCJ171S_SR_55
PassedTo Verify whether theService healthinformation is shown inPI or not
Checking theservice health ofapplications in PI
EWLCJ171S_SR_56
PassedTo verify whethermetrics in theapplication of PI isshown properly or not.
checking themetrics in the PIapplication.
EWLCJ171S_SR_57
PassedTo verify whether theclient metrics in PI isProper or not.
checking the clientconnection andstatus of it.
EWLCJ171S_SR_58
PassedTo check whether thespid and serial nodetails are displayed ornot.
checking the SPIDand Serial numberon PI
EWLCJ171S_SR_59
PassedTo check whether thestatus of the PI isworking fine.
Configuring someoperation in PI andchecking the statusof it
EWLCJ171S_SR_60
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )181
Regression Features - Test SummarySR Cases
PassedTo check whether theSNMP is enabled afteradding the device in PI
Checking theSNMP status afteradding the device.
EWLCJ171S_SR_61
PassedTo check whether theSNMP is enabled afterdeleting the device in PI
Checking theSNMP status afterdeleting the device.
EWLCJ171S_SR_62
PassedTo check whether theSNMP is enabled afterrebooting the device inPI
Checking theSNMP status afterrebooting thedevice.
EWLCJ171S_SR_63
PassedTo check whether theSNMP state
Checking theSNMP status in HAmode.
EWLCJ171S_SR_64
PassedTo check whether theexporting and reboot ishappened withoutchanging snmp status.
Checking the statusof SNMP whileexporting templatefrom PI andrebooting.
EWLCJ171S_SR_65
PassedTo check whether theCMX is enabled andgenerating logs
Checking theconnectivity of theCMX and its status
EWLCJ171S_SR_66
PassedTo check that the CMXdoes not provide logswhen it is in disabledstate.
Checking thefunctionality ofCMX when it is indisabled state.
EWLCJ171S_SR_67
PassedVerify able to access theGUI/SSHof the primarywlc when we do a HAfailover in a pair ofCisco Catalyst 9800Series WirelessController in anybrowser. Disconnectand Reconnect thewireless client, it worksfine in ChromeBrowser.
GUI/SSH of theprimary wlc whenwe do a HA failoverin a pair of CiscoCatalyst 9800 SeriesWireless Controllerin ChromeBrowser.
EWLCJ171S_SR_68
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )182
Regression Features - Test SummarySR Cases
PassedVerify able to access theGUI/SSHof the primarywlc when we do a HAfailover in a pair ofCisco Catalyst 9800Series WirelessController in anybrowser. Disconnectand Reconnect thewireless client, it worksfine in IE Browser.
GUI/SSH of theprimary wlc whenwe do a HA failoverin a pair of CiscoCatalyst 9800 SeriesWireless Controllerin IE Browser.
EWLCJ171S_SR_69
PassedTo Verify the Licencewith respect to devicetype and count - VirtualApplication
Licencing countwith differentdevice on virtualAppliance.
EWLCJ171S_SR_70
PassedTo Verify the Licencewith respect to devicetype and count -Physical Appliance
Licencing countwith differentdevice on PhysicalAppliance.
EWLCJ171S_SR_71
PassedVerify PerformanceDashboard able to showall the data's properly.
PerformanceDashboard able toshow all the data'sproperly.
EWLCJ171S_SR_72
PassedVerify WirelessDashboard able to showall the data's properly.
Wireless Dashboardable to show all thedata's properly.
EWLCJ171S_SR_73
PassedVerify export ofnetwork devicesproperly with selecteddevices.
Network deviceExport option withselected device
EWLCJ171S_SR_74
PassedVerify export ofnetwork devicesproperly with BulkOption.
Network deviceExport option withBulk export option.
EWLCJ171S_SR_75
PassedTo Verify the'Configuration' of 'PhyOFDM Parameters' onAP3802E
OFDM Parameterkeeps showing'Automatic' ormanual allocation
EWLCJ171S_SR_76
PassedTo Verify the'Configuration' of 'PhyOFDM Parameters' onAP2802
To Verify the'Configuration' of'Phy OFDMParameters'
EWLCJ171S_SR_77
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )183
Regression Features - Test SummarySR Cases
PassedTo upgrade PI from 3.7CCO to 3.8 and checkif the device details aresame as before and afterupgrade
Upgrading PI from3.7 CCO build to3.8 and check if thedevice detailsbefore and afterupgrade are same .
EWLCJ171S_SR_78
PassedTo restore the backedup data in PI and checkif the restoration of datais successful also Checkthe device details andconfiguration
Restoring thebacked up data in PIand check if thedetails are restoredcompletely or not
EWLCJ171S_SR_79
PassedTo restore backup datato PI making a freshinstall.
Restoring backed updata after freshinstallation .
EWLCJ171S_SR_80
PassedTo check if the schedulearchive configurationfor the Cisco Catalyst9800 Series WirelessController devicehappens successfullywhen scheduled or not
Making schedulearchiveconfiguration forparticular CiscoCatalyst 9800 SeriesWireless Controllerdevice happenswhen scheduled
EWLCJ171S_SR_81
PassedTo check if ScheduleArchive for all networkdevices throughinventory page works ornot
Schedule Archivefor all networkdevices throughinventory device
EWLCJ171S_SR_82
PassedTo generate a customreport related to AP andcheck if the details ofthe AP and Sub detailsof the AP are showncorrectly.
Generating acustom reportrelated to AP andcheck differentdetails of the AP
EWLCJ171S_SR_83
PassedTo generate a customreport related to RogueAP and check if thedetails of the AP andSub details of the APare shown correctly.
Generating acustom reportrelated to RogueAPand check differentdetails of the AP
EWLCJ171S_SR_84
PassedTo generate a customreport related to Clientsand check if the detailsof the AP and Subdetails of the AP areshown correctly.
Generating acustom reportrelated to Clientsand check differentdetails of the AP
EWLCJ171S_SR_85
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )184
Regression Features - Test SummarySR Cases
PassedTo check if the HApairing happens whenthe connectivity is madethrough Eth1
Check if the HAhappens when theconnectivity ismade through Eth1
EWLCJ171S_SR_86
PassedTo check if the HApairing happens whenthe connectivity is madethrough Eth1
Check if the HAhappens when theconnectivity ismade through Eth0
EWLCJ171S_SR_87
PassedTo check if the HAhappens when theconnectivity is madethrough Eth0 port inPrimary and Eth1 insecondary
Check if the HAhappens when theconnectivity ismade through Eth0port in Primary andEth1 in secondary
EWLCJ171S_SR_88
PassedTo verify whetherconfig file uploaded ornot via FTP method
Upload the backupconfig file via TFTPmethod
EWLCJ171S_SR_89
PassedTo verify whetherconfig file uploaded ornot via HTTP method
Upload the backupconfig file viaHTTP method
EWLCJ171S_SR_90
PassedTo verify whetherconfig file uploaded ornot via PI
Upload the backupconfig file via PI
EWLCJ171S_SR_91
PassedTo check whether clientassociate properly or not
Checking Clientconnectivity whileprimary goes downin HA
EWLCJ171S_SR_92
PassedTo check whether clientassociate properly or not
Checking Clientconnectivity whileroaming
EWLCJ171S_SR_93
PassedTo Check whetherVLAN details shown ornot while configuringAP flex mode andCentral Switching
Checking VLANdetails afterconfiguring flexprofile and CentralSwitching
EWLCJ171S_SR_94
PassedTo Check whetherVLAN details shown ornot while configuringAP flex mode andwithout AAA override
Checking VLANdetails withoutAAA override
EWLCJ171S_SR_95
PassedTo Check whether apcrashed or not whilechanging the radios(2.4& 5GHz)
Checking the Apcrash whilechanging the Apradios(2.4 GHz/5GHz)
EWLCJ171S_SR_96
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )185
Regression Features - Test SummarySR Cases
PassedTo Check whether apcrashed or not after Apreload
Checking the Apcrash after Ap Reset
EWLCJ171S_SR_97
CSCvs23453FailedTo Check whether apcrashed or not afterdisabling MFP
Checking the Apcrash while disablethe MFPconfiguration
EWLCJ171S_SR_98
PassedTo verify whetherclients getting AIDvalue after the interroaming or not
Associate client andcheckingAID valuewhile doing interroaming with Apsin Local/flex
EWLCJ171S_SR_99
PassedTo verify whetherclients getting AIDvalue after doing intraroaming or not
Associate client andcheckingAID valuewhile doing intraroaming with Apsin Local/flex
EWLCJ171S_SR_100
PassedTo verify whetherclients getting AIDvalue after the FTroaming or not
Associate client andcheckingAID valuewhile doing FTroaming with Apsin Local/flex
EWLCJ171S_SR_101
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )186
Regression Features - Test SummarySR Cases
C H A P T E R 5Related Documentation
• Related Documentation, on page 187
Related DocumentationCME 8.10 Rlease Notes
https://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/810/release_notes/b_ME_RN_810.html
WLC 8.10 Configuration Guide
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-10/config-guide/b_cg810.html
CMX 10.6 Configuration Guide
https://www.cisco.com/c/en/us/td/docs/wireless/mse/10-6/cmx_config/b_cg_cmx106/getting_started_with_cisco_cmx.html
PI 3.7 User Guide
https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-7/user/guide/bk_CiscoPrimeInfrastructure_3_7_0_User_Guide.html
ISE 2.6 Release Notes
https://www.cisco.com/c/en/us/td/docs/security/ise/2-6/release_notes/b_ise_26_RN.html
Cisco Catalyst 9800 Series Wireless Controller Software Configuration Guide
https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/16-12/config-guide/b_wl_16_12_cg.html
Cisco Catalyst 9800 Series Wireless Controller 17.1 Configuration Guide
https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-1/config-guide/b_wl_17_11_cg/mac-authentication-bypass.html
Cisco Catalyst 9800 Series Wireless Controller 17.1 Release Notes
https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/17-1/release-notes/rn-17-1-9800.html
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )187
Test Results Summary for Catalyst 9800 Series Wireless Controller and EWC 17.1 for Japan (Release Version 17.1.20200103 )188
Related DocumentationRelated Documentation