TEST & MEASUREMENT - documents.rs-components.comdocuments.rs-components.com/EITC/XA/testn... ·...

www.rsnewzealand.com 0800 888 780

TEST &MEASUREMENTNOVEMBER 2009

Choose from our extensive range of over 3,000 T&M products from the leading brands.

2 TEST & MEASUREMENT NOVEMBER 2009 - MARCH 2010 www.rsnewzealand.com 0800 888 780

501-348 U1241A $402.00501-285 U1242A $440.00501-297 U1251A $805.00678-0749 U1252A $868.00

HANDHELD DIGITAL MULTIMETERS Two exciting new ranges of tough, durable digital multimeters with a host of powerful features and specifications, all offering extremely good value for money.

U1241A and U1242A

• Wide measurement ranges and with a CAT III 1000V safety rating and certified to CE, CSA and UL standards. Plus they come with a certificate of calibration and test report, at no extra cost

U1241A

• 10,000 count display with adjustable backlighting

• 0.09% basic DC voltage accuracy and true RMS measurement

• Basic functions: DCV, DCI. ACV, ACI, resistance, frequency, continuity and diode test

• Advanced functions: capacitance and temperature

• U1242A Additional Features

• Harmonic ratio, dual temperature and differential temperature

• Switch counter

U1251A and U1252A

• Delivering more features and value than any other multimeter in its class and they come with all the essential accessories you need at no extra cost

• 50,000 count dual display

• Manual and automatic data logging

• IR-USB connectivity

U1251A

• Up to 0.03%basic DC voltage accuracy

• True RMS AC measurement

• K-type temperature measurement

• Manual and automatic data logging up to 200 points

U1252A

• Up to 0.25% basic DC voltage accuracy

• True RMS AC, AC+DC measurement

• Type J and K temperature measurement

• 20MHz frequency counter

• Programmable square wave output

• Manual and automatic data logging up to 200 points

NEW

159-2140 IDM91E $241.00

726

ISO-TECH IDM91E MULTIMETERThe enhanced version of the popular IDM91, with additional safety features of fuse protection on both 200mA and 10A current ranges, and a beep facility when probes are incorrectly inserted.

• Meets IEC1010-1 Cat II 600V

• Large 20mm digit, high contrast display

• Diode test and continuity bleeper

• Auto power off

• Measures 600Vac/dc, 10Aac/dc

• Supplied with battery, test leads, holster and instructions

516-6313 T140 $278.00

Page 2812

T140 VOLTAGE AND CONTINUITY TESTER A useful, cost effective 2-pole tester of rugged construction and ergonomic design which features a three-phase rotation detection system for quick phase rotation indication, and an integral torch for working in low light levels.

• 3½ digit, backlit LCD display and LED bargraph

• 12 to 690Vac/dc range

• Resistance measurement up to 1999Ω

• Continuity 0 to 400kΩ

• Response time <0.1s

• Meets EN61010-1 and EN61243-3 requirements

• Protected to IP65

113-351 IDM62T $230.00

Page 2725

ISO-TECH IDM62T POCKET MULTIMETER Compact instrument with soft rubber side grips that features a non-contact AC voltage detector and a Type K thermocouple input for temperature measurement from -20°C to +800°C.

• 11 functions and 32 ranges

• 2000 count LCD display

• 1000Vac/dc measurement

• 10Aac/dc measurement

• 20MHz frequency counter

• 2mF capacitance range

• Full autoranging with manual override

Page 2793

411-974 Fluke 353 $1428.90411-970 Fluke 355 $1723.70

FLUKE 353 AND 355 CLAMPMETERS Two high quality, true RMS 2000A clampmeters with wide capacity jaws that fit easily around large conductors found in industrial applications. Accurate peak measurements can be taken using the in-rush current mode function, which is ideal for testing motors and inductive loads.

• Jaw capacity 58mm diameter

• 4000 count backlit display

• Min/Max/Average recording mode

• True rms crest factor = 2.4

• Frequency measurement

• The 355 also measures voltage, resistance and continuity

online at www.rsnewzealand.com

MULTIMETERS & CLAMPMETERS

TEST & MEASUREMENT NOVEMBER 2009 - MARCH 2010www.rsnewzealand.com 0800 888 780

NEW

501-382 Fluke 113 $326.40616-1454 Fluke 115 $353.00616-1460 Fluke 117 $424.00

Page 2732

FLUKE 113, 115 AND 117 MULTIMETERSThree superb True RMS multimeters from Fluke for all your general electrical engineering applications.

Fluke 113

• VCHEKTM measurement function to simultaneously test for voltage or continuity through low input impedance (3kΩ) inputs

• Auto and manual ranging

• Max/Min record function

• Diode test and capacity measurement

Fluke 115 Multimeter

• Resistance, continuity, frequency, capacitance and diode test

• Measures 20A 30sec momentary, 10A continuous

Fluke 117 Electrician’s Multimeter

• Non-contact voltage detection

• Automatic ac/dc voltage selection

• Measures 20A 30sec momentary, 10A continuous

• Resistance, continuity, frequency and capacitance

443-4110 IDM73 $344.00

IDM73 CAT IV MULTIMETERRealistically priced and packed with features, the IDM73 meets Cat IV 600V/ Cat III 1000V standards and comes with a protective holster, tilt stand and lead storage.

• Large 6000 count, backlit display

• Data hold and Max/Min function

• Frequency counter and capacitance measurement

• Auto power-off

• True rms on AC mode

• Measures 750Vac/1000Vdc, 10Aac/dc

• Shock resistant (1m drop)

Page 2725

669-3490 Fluke 772 $1,320.00669-3493 Fluke 773 $1,890.00


PROCESS MILLIAMP CLAMPMETERSFluke 772 / 773

• Measure 4 to 20 mA signals without ”breaking the loop” just like the innovative and popular Fluke 771 Process Milliamp Clampmeter

• Source 4 to 20 mA signals for testing control system I/O or I/Ps

• Simulate 4 to 20 mA signals for testing control system I/O

• Measure 4 to 20 mA signals with in-circuit measurement

• Simultaneously measure mA in-circuit with 24V loop power for powering and testing transmitters

• Source mA output signals in a linear ramp or 25% step output

• Automatically change the 4 to 20 mA output for remote testing

• Power saving features, auto-off, backlight timeout extend battery life

Additional Fluke 773 Features

• DC voltage measurement to verify 24V power supplies or voltage I/O signals

• Source dc voltage to test input devices that accept a 1 to 5 volt or 0 to 10 volt signal

• Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp

• Output mA signal enables a logging DMM (289) or other device to record the 4 to 20 mA signal without breaking the loop

• mA in/out: simultaneously measure the mA signal with the clamp and source a mA signal

• Apply a mA input signal to a device and measure its’ 4 to 20 mA output on devices such as valves or mA isolators

• Voltage output linear ramp or 25% step output

• Automatically change the voltage output for remote testing

Page 2731

156-724 Fluke 287 $1,179.00156-730 Fluke 289 $1,239.00

FLUKE 280 SERIESMost advanced multimeters 287 and 289 put you at the cutting edge of measurement and diagnostic capabilities.

• Large 50,000 count, 1/4 VGA dot matrix display with white backlight

• Logging function for unattended monitoring of signals over time

• With on board Trend Capture users can graphically review logged readings without needing a PC

• True RMS and more

443-8645 IDM72 $274.00

Page 2725

ISO-TECH IDM72 COMPACT MULTIMETERA true RMS instrument that meets CAT IV 600V / CAT III 1000V Standards, with a large 6000 count displays.

• Data hold, Min/Max function

• Frequency counter

• Capacitance measurement

• Autopower off

• True RMS AC mode

• DCµA, A

620-7291 ICM20 $189.00

ISO-TECH ICM20 AC CURRENT CLAMP METER A bargain price for a clamp meter designed for safe non-intrusive AC current measurement up to 400A, with readings displayed on a 2000 count large scale LCD.

• Maximum conductor size 27mm diameter

• Display and Max hold functions

• Auto power off

• Supplied with battery, case and instructions

• Safety to EN61010-1 CAT III 600V

Page 2788

3



470-0798 ICM139R $730.00

Page 2793

369-2214 IDM99-II $431.00

Page 2727

450-1052 IPM3000 $484.00

Page 2796

468-1170 ICM135R $368.00

Page 2789

NEW

678-0755 U1253A $881.00


Page 2793

NEW

678-0733 34405A 5.5 Digit Multimeter $1,455.00678-0730 34401A 6.5 Digit Multimeter $2,010.00

678-0737 34410A 6.5 Digit Multimeter $2,412.00678-0746 34411A 6.5 Digit multimeter $3,673.00

34410A 6.5 Digit Multimeter

• 0.003% DC basic accuracy

• Capacitance and temperature functions

• Data logger with 50,000 reading non-volatile memory

34411A 6.5 Digit multimeter

• Analogue level and pre/post triggering

• 50,000 readings/sec @ 4.5 digits to the PC

• LAN, USB and GPIB interface

DIGITAL BENCHTOP MULTIMETERSFour new instruments, with a wide range of specifications and capabilities. Designed to enable engineers and technicians to carry out servicing and maintenance applications with confidence and efficiency.

34405A 5.5 Digit Multimeter

• 16 measuring functions including temperature and capacitance

• 0.025% DC voltage accuracy

• USB 2.0 interface

• 34401A 6.5 Digit Multimeter

• 0.0035% DC voltage accuracy

• 0.6% AC basic accuracy

• 1000 readings/sec in ASCII format across the GPIB bus

ICM 135RAn ergonomically designed instrument with single handed operated controls and an LED backlit display for use in low light levels.

• 600A AC true RMS measurement

• 600Vac/dc measurement

• Jaw capacity 34mm diameter

• 4000 count digital display

• Min/Max and display hold functions

• Resistance and continuity bleeper <30Ω

• Supplied with test leads, battery, carry case and instructions

ISO-TECH IDM99-II MULTIMETERA high accuracy, autoranging instrument in a stylish modern design, with a wide range of features.

• Large high contrast backlit display with 82 segment bargraph

• Measures ac/dc voltage and current, resistance, continuity, frequency,

• RPM, capacitance and temperature

• True RMS measurement

• Max/Min and relative measurement

• Diode test and continuity bleeper

• Meets EN61010-1 CAT III 600V, CAT II 1000V

• Supplied with battery, test leads, holster and instructions

ISO-TECH ICM139R CLAMP METERDesigned for industrial applications, with a jaw capacity of up to 51mm diameter, true RMS readings in AC mode and an LED backlit display which is ideal when working in low light conditions.

• Measures up to 1000V ac/dc and 1000A ac/dc

• Resistance and continuity beeper

• Frequency counter

• 10ms peak hold on AC volts and current

• Flame retardant, high impact case

• Meets EN61010 CAT IV 600V, CAT III 1000V

• Supplied with battery, test leads, carry case and instructions

AGILENT U1253A DMMOrganic Light Emitting Diodes (OLED) display with analogue bargraph giving bright colour display with a wider viewing angle than LCD displays and no need for a backlight.

• 50,000 counts resolution on both displays

• 0.025% basic dcV accuracy

• 100kHz acV bandwidth

• Auto ranging with MIN/MAX recording, peak and display HOLD

• True RMS AC+DC measurements

• Resistance, capacitance, frequency, continuity, diode test

• Optical USB interface (U1173A Optical USB interface cable (available separately)

• Robust over moulded design with multi-function tilt stand

• Complies with EN61010-1CAT IV 600V safety rating

• Dimensions: 94mm x 204mm x 59mm : Weight 527g

IPM3000 POWER CLAMP METER This 1000Aac power meter has features ideally suited to HVAC and electrical maintenance applications, meeting EN61010-1 IEC1010-2-032 600V CAT III specifications.

• Rating 1000Aac, 600Vac

• Power measurements 60/600kW/kVA

• Temperature measurement -50°C to +900°C

• True rms current and voltage measurement

• 40mm clamp diameter



167-645 $72.50

VOLTSTICK SOUND AC VOLTAGE INDICATOR Check for the presence AC voltage in cables, wall sockets, junction boxes etc with this non-contact pen style device. No current flow is needed for correct operation.

• Audible and visual indication

• Distinguish between live and neutral in single and 3-phase installations

• Locates faulty lamps in series connections

• Detect blown fuses inside plugs or fuse holders

Page 2813

410-0104 Mastercheck 3.2 $93.30

MASTERCHECK 3.2 VOLTAGE TESTER A compact, cost effective instrument with LED indication for quick and efficient testing.

• Voltage range 6-400Vac/dc

• Input resistance 265kΩ

• Input current <2.5mA @ 400V

• Continuity testing <500kΩ

• Peak current resistance 6kV

• Requires two AAA Batteries (591-657)

Page 2811

166-838 230Vac Indicator $72.80166-816 110Vac Indicator $72.80

VOLTSTICK PRO AC VOLTAGE INDICATOR A pen style non-contact AC voltage indicator designed with a patented fork tip which reduces external interference fields and increases selectivity.

• Powerful red light in the tip glows when a voltage is detected

• Live cables can easily be detected in equipment cabinets, fuse boxes etc

• Extremely safe when measuring in junction boxes

• Complies with IEC61010-1 Cat III 1000V

Page 2813

410-0069 $289.00

PD690 PROVING UNIT Portable and battery powered, essential for ensuring the safety of voltage indicators and test lamps up to 690V.

• Single probe operation allows for non-contact voltage tester proving (5mm access)

• Suitable for use with Drummond and other test lamps that have a lower resistance than a neon type

• Minimum internal resistance requirements 4kΩ

Page 2812

530-5697 IIT2302 $780.00

ISO-TECH IIT2302 INSULATION AND CONTINUITY TESTEREnjoy the benefit of quality microprocessor controlled performance and the advantage of triple-voltage insulation testing, in one compact unit.

• 250/500/1000V insulation test ranges (1mA)

• 20/200/2000Ω continuity ranges (200mA)

• Auto null and bargraph indication of test voltage

• Live circuit warning

• Lock-down facility for continuous operation

Page 2779

621-1155 CombiCheck 1.3 $133.34

COMBICHECK AC/DC VOLTAGE TESTER This 2-pole tester offers safe testing of AC and DC voltages from 6 to 690V with LED indication.

• Test probe illumination

• Audible signal for voltage and continuity

• Continuity test

• Polarity detection

• Phase sequence test

• Single phase test

• Meets EN/IEC61243-3 and VDE0682 Part 401 approvals

Page 2811

5

ELECTRICAL


6

287-4415 PAT4DV $3,820.00287-4421 PAT4DVF $4,560.00

PAT4DV AND PAT4DVF DUAL VOLTAGE TESTERS High quality, microprocessor controlled instruments designed for maximum flexibility and ease of use on both 110V and 230V portable appliances, and extension leads.

• Earth continuity test in accordance with EEA recommendations for IT equipment

• Insulation tests at 500Vdc

• Earth leakage test

• Stores up to 1000 tests which can be downloaded to a PC

• Alphanumeric keypad

• Serial and parallel connections

• PAT4DVF with Flash Test facility

535-3113 MIT 400 $1,160.00535-3129 MIT 410 $1,290.00611-1257 MIT 420 $1,510.00611-1263 MIT 430 $1,710.00611-1314 MIT 40X $1,450.00

535-3185 MIT 220 $1,010.00535-3191 MIT 230 $1,110.00

BM200 Series Replacement Guide

Old BM220 Series Model RS Stock No BM Test Voltage MIT 220 535-3185 MIT 230 535-3191

BM121 198-0294 250V √

BM221 254-9658 500V √

BM222 254-9664 500, 1000V √

BM223 254-9670 250, 500, 1000V √

BM224 254-9686 500V √

BM227 330-8379 250V, 500V √

MEGGER MIT 220 AND 230 INSULATION AND CONTINUITY TESTERSTwo of the smallest insulation testers on the market today, yet offering a wide range of safety and operational features.

• Insulation testing to 1000MΩ

• Continuity testing at 200mA to 0.01Ω resolution

• Automatic discharge of circuit under test

• Live circuit warning above 25V

• Lead resistance compensation on continuity

• MIT 220: 250V and 500V testing voltages

• MIT 230: 250V, 500V and 1000V testing voltages

Page 2805

MIT 400 SERIES DIGITAL INSULATION AND CONTINUITY TESTERS These testers combine the latest range of measurement techniques in a state-of-the-art, compact package. All instruments are designed to meet the requirements of electrical contractors and industrial testing to Cat IV 600V.

All Models:

• Unique dual digital display and analogue bargraph

• Continuity testing at 200mA down to 0.01Ω

• AC/DC voltage measurement

• Alternative 20mA test current

• Leakage current display

• Hard carry case, IP54 weatherproof housing, silicone test leads

MIT 410 Additional Features

• 50V, 100V, 250V, 500V and 1000V insulation testing

• 100GΩ insulation range

• Leakage current display

• Timer, PI and DAR insulation tests


• 200GΩ insulation range

• 10µF capacitance measurement

• Storage of 1000 test results


• Capability to download results via Bluetooth

MIT 40X Special Application

• 10-100V adjustable insulation test voltage

Page 2777

Page 2776

Page 2809

418-379 $192.00

MULTISCANNER® I700 ONESTEP® CABLE AND METAL DETECTOR Helps you to quickly and easily locate studs, metal, and hot electrical wiring behind walls, ceiling and under floors. The unique floating-head design keeps the scanning head flat on rough surfaces even if the handle is rocked or tilted.

• Find the centre of wood or metal studs or joists up to 38mm deep

• Locate ferrous metal, such as rebar up to 76mm deep and non-ferrous metal, such as copper pipe up to 38mm deep

• Locate hot electrical wires even when encased in plastic conduit

• Warning of hot electrical wiring in stud and metal scanning modes

ELECTRICAL


DMM’s and electrical test from Fluke

True-RMS, 2,000A clamp meters for industrialapplications.

Confidently take reliable readings withthe true-rms, Fluke 353/355 clampmeters; the tools of choice for highcurrent measurement up to 2,000A.

■ Extra-wide jaw easily clampsaround large conductors, typicallyfound in high current applications

■ Rugged design and CAT IV 600V,CAT III 1,000V ratings add an extraelement of protection when takinghigh-powered measurements

■ The 355 measures voltage andresistance, making it a versatile tool forutilities, electrical contractors andindustrial service technicians

The new Fluke 350 Seriesclamp meters

Fluke 170 Series versatilemeters for field use

Safer, easier installation testing. The new 1650B Seriesbuilds on the rugged reputation of the earlier 1650Series, only it’s re-designed to meet your need for moreproductive test tools. New additional features:■ Fast high current loop test■ Variable RCD trip current setting (inc. a non-trip test)■ New unique zero adapter accessory for accurate mains

test lead compensation■ High quality GS38 fused test leads for greater safety

and repeatability

The 1650B Series continues to sets the standard ininstallation testers.

All three models 1651B, 1652B and 1653B verify thesafety of electrical installations in domestic, commercialand industrial applications. They can ensure that fixedwiring is safe and correctly installed to meet therequirements of IEC60364 and BS7671 17th EditionWiring Regulations.

Fluke 1653B

Fluke 1650Binstallationtesters

Product Description RS Stock No. Price

Fluke 1651B Installation Tester 573-404Fluke 1652B Installation Tester 573-410Fluke 1653B Installation Tester 573-400

NEW

Extra functionality, fastertesting, and as rugged as ever.

The popular Fluke 170 Series Digital Multimetersare the ideal solution for a variety of general

purpose measurement applications.With reliability and ruggedconstruction that is second tonone and with Fluke lifetimewarranty, you cannot fail to

be impressed with thesetough meters. The 170 Serieshas the features needed tofind most electrical, electro-

mechanical and heating andventilation problems. They are

simple to use and include, True-RMS measurement, a wide range

of measurement functions,conformance to the latest safety

standards and a large display.


Fluke 175 Digital Multimeter 394-4470Fluke 177 Digital Multimeter 394-4486Fluke 179 Digital Multimeter 394-4492


Fluke 353 2,000A Clamp meter 411-974Fluke 355 2,000A Clamp meter 411-970

Fluke 179Fluke 355

$1,638.00

$2,231.00

$3,150.00

$1,428.90

$1,723.70

$585.90

$604.80

$628.80

7

ELECTRICAL


389-4303 ICL421 $570.00

ILC421 VOLTAGE AND CURRENT CALIBRATOR This device has four functions: a) precision current source, b) measurement of current signal, c) power and measurement of

two-wire loop, and d) precision dc mV source.

• 3.5 digit 2000 count display

• Adjustable 0-24mA source

• Adjustable -199.9mV to 199.9mVdc source

• Current calibrator drives loads up to 500Ω

Page 2644

411-122 $236.00

RS 1327K INFRARED THERMOMETERTemperature measurement couldn’t be easier; with the pistol-grip design providing a comfortable grip, and fast easy to read temperature measurement.

• Laser targeting

• Measurement range -150°C to +1350°C

• Backlit LCD display

• Audible and visible alarm

• Data memory (50 measurements) and read function

• Adjustable emissivity

• Max/Min function

• Socket for Type K thermocouple

Page 2697

180-7098 4-point type K simulator $303.00

4-POINT TYPE K THERMOCOUPLE SIMULATOR Pocket sized, with 4 preset outputs for checking and calibrating temperature measuring instruments.

• Pushbutton selector for one hand operation

• Ranges: 0°C/32°F, 100°C/212°F, 500°C/932°F, 1000°C/1832°F

• Supplied with detachable lead and 2 Type K plugs

Page 2638

180-7082 Current simulator $368.00

4 TO 20MA CURRENT SIMULATOR Pocket sized with 3 preset outputs suitable for process control applications and setting-up engineering units etc.

• 4, 12 and 20mA outputs

• Accuracy to ±0.2mA

• Overload indicator when the output current delivered is less than the set level

• Low battery indication

• Requires a PP3 battery

• Supplied with test lead terminated with spade lugs

Page 2644

287-642 Fluke 771 $1,026.00

Page 2795

FLUKE 771 mA PROCESS CLAMP METER A unique, compact clamp meter for control systems and analogue I/O, the detachable clamp with extension cable allows user to take measurements in tight locations.

• Measure 4 to 20mA output signals from transmitters without breaking the loop

• Accuracy of 0.2%

• Measure mA signals with up to 0.01mA resolution

• Hold function captures and displays changing measurements

627-5711 $5895.00

Page 2800

FLUKE 1735 DATA LOGGER The ideal instrument for conducting energy studies and basic power quality logging, logs most electrical power parameters, harmonics and captures voltage events.

• Record power and associated parameters for up to 45 days

• Monitor maximum power demand over user-defined averaging periods

• Measure harmonic distortion caused by electronic loads

• Improve reliability by capturing voltage dips and swells from load switching

• Easily confirm instrument setup with colour display of waveforms and trends

• Measure all three phases and neutral with included 4 flexible current probes

• Compact, rugged design with IP65 case

• Meets Cat III 600V

237-394 CA8220 $1,210.00

Page 2797

CA8220 POWER ANALYSERDesigned for the professional and optimised for trouble shooting and maintenance of electrical equipment and systems in single andbalanced three phase systems.

• Also tests rotating machines

• Large backlit 173 segment LCD display

• Voltage range: 6-600Vrms AC and DC

• Current range: 1A to 1700Adc, 5mA-6500Aac

• Rotation speed: 6RPM - 120KRPM

• Resistance measurement 0-2000Ω

• RS-232 interface

• 2-wire PT100 probe input

PROCESS CONTROL


312-1093 $396.00

255-522 $740.00

LEGIONELLA TEMPERATURE MEASURING KITEliminate the dangers of legionella growth in water supplies with this essential kit, and check that hot water is above 50°C and cold water is below 20°C.

Contents:

• MM2000 thermometer, battery and holster

• Type T surface probe, immersion probe and fine wire

• 100 attachment pads

• Guidance notes and instructions

• Temperature Record book

617-0565 $800.00

ISO-TECH 1352N SOUND LEVEL METERA versatile piece of kit, designed to meet the requirements of safety, health, industrial safety officers and sound quality control in various environments. Ideal for spot checks or longer term monitoring.

• Meets the requirements of IEC61672-1:2002 Class 2 and IEC60651:1979 Type 2

• 4 digit LCD display with 0.1dB steps

• Ranges from 30dB to 130dB between 31.5Hz to 8kHz

• Alarm setting facility for over and under limits

• Data logging capacity up to 32,000 records

online at www.rsnewzealand.com Page 2690

132-762 $179.00

PEN STYLE THERMOHYGROMETEREconomically priced, with a clear LCD display which shows relative humidity and temperature simultaneously, in °C or °F.

• Range: -10°C to +50°C, 5 to 95% RH

• Min/Max function

• Auto power off

• Data hold

• Supplied with lithium battery and instructions

Page 2657

626-4266 $455.00

FLUKE 971 TEMPERATURE AND HUMIDITY METER A lightweight and rugged thermohygrometer which quickly takes accurate readings of temperature and humidity.

• Range: -20°C to +60°C, and 5 to 95% RH

• Measures dewpoint and wet bulb

• Stores up to 99 records

Page 2659

Page 2668

Page 2701

327-1722 $394.00

RD-99 REFRIGERANT LEAKAGE DETECTOR Detects all existing refrigerants including HFCs, HCFCs and CFCs, and has a high sensitivity mode to locate small leaks.

• Audible and LED indication

• 400mm gooseneck for awkward areas

• Protective rubber sleeve houses gooseneck when not in use

Page 2668 379-448 Ti10 $11,741.00379-438 TI25 $16,065.00

CD100A COMBUSTIBLE GAS LEAK DETECTOR The ideal instrument for heating engineers to pinpoint combustible gas leaks. It also verifies that new installations are leak-free.

• Easy one-hand operation

• Detects: methane, natural gas, ammonia, and many other gases

• Long 18˝ goose-neck for awkward areas

• LED probe tip illumination

• Simple adjustable tic rate allows pinpoint leak detection

• Rubber boot protects the instrument

TI10 AND TI25 FOR ELECTRICAL INSTALLATIONSThese thermal imagers are optimised for electrical applications, including HVAC equipment, process instrumentation, and electro-mechanical equipment.

• IR-Fusion® technology combines both visible light and infra-red camera

• -20°C to 250°C temperature range, ±5°C accuracy

• ≤0.2°C (100mK) thermal sensitivity (NETD) identifies small temperature variations that can indicate problems in buildings

• Engineered to withstand a two metre drop – IP54 rated

• Intuitive, three button menu is easy to use

• Store results on a 2GB SD card (supplied)

TiR1 adds:


• ≤0.1°C (100mK) thermal sensitivity (NETD) identifies very small variations

• On-screen emissivity correction

• Voice annotate each image for future reference

9

BUILDINGS / ENVIRONMENT


379-432 TiR $11,741.00379-444 TiR1 $15,045.00

Page 2702

292-329 410-1 $299.00292-313 410-2 $465.00

Page 2672

410 POCKET LINE WIND, TEMPERATURE, HUMIDITY METERSInnovative pocket sized measurement technology for wind or air velocity, temperature measurement and (410-2 only) humidity measurement.

• Integrated 40mm vane

• Timed mean value calculation

• Windchill factor calculation or outdoor areas

• Measurement units include m/s, km/h, mph, fpm, beaufort and knots

498-0102 Testo 815 $770.00

QUALITY SOUND METERThe Testo 815 is an affordable, high accuracy sound level meter, suitable for a variety of applications.

• High accuracy (Type 2 according to IEC 60651)

• Frequency weighting according to characteristic line A and C

• Selectable sampling rate (Fast/Slow)

• Max/Min function

• Built-in tripod screw (¼in.)

• Simple to adjust (calibration screw driver)

Page 2653

292-363 Testo 540 $343.00

Page 2657

PALM SIZE ENVIRONMENTAL MONITORINGInnovative pocket sized measurement technology for measuring ambient light conditions.

• Range 0 - 99,999 Lux

• Hold and Min/Max facility

• Units in lux or footcandles

• Supplied with wrist strap, belt holder, protective cap, batteries and instructions

292-307 Testo 810 $274.00 114-168 Testo 510 $381.00

TESTO THERMOMETERInnovative pocket sized measurement technology for air and surface temperature measurement. Surface temperature IR measurement with 1-point laser spot marking and 6:1 optics.

• Air temperature measurement

• Simultaneously measures surface and air temperature

• Display of differential temperature e.g. between surface and air

• Hold function and max/min values

• Backlit display

Page 2700 Page 2682

TESTO MANOMETERPocket sized measurement technology for differential pressure measurement.

• Measuring range of 0 to 100 mbar (100hPa)

• Backlit display

• Gas pressure and flue draught measurement

• Duct flow velocity measurement with Pitot tube (available separately)

• Air density and temperature compensated

TIR AND TIR1 FOR BUILDING DIAGNOSTICS These thermal imagers are optimised for building applications, delivering clear crisp images needed to find problems fast. Test roof systems and building insulation, detect moisture as well as air leakage and drafts.

• IR-Fusion® technology combines both visible light and infra-red camera


• ≤0.1°C (100mK) thermal sensitivity (NETD) identifies small temperature variations that can indicate problems in buildings

• Engineered to withstand a two metre drop – IP54 rated

• Intuitive, three button menu is easy to use

• Store results on a 2GB SD card (supplied)

TiR1 adds:

• ±2°C accuracy

• ≤0.07°C (100mK) thermal sensitivity (NETD) identifies very small variations

• On-screen emissivity correction

• Voice annotate each image for future reference

BUILDINGS / ENVIRONMENT


621-5113 Circuitmaster 4000M $8,060.00

CIRCUITMASTER CIRCUIT ANALYSERCircuitMaster is a unique circuit test instrument designed to simplify the safe probing of fine pitch PCBs and to combine traditional and new test methods in one instrument.

Supplied with:

• Mains lead

• 2x oscilloscope probes

• MultiWay cable assembly

• 40-way and 16-way DIL test clip

• BNC to 4mm adapter

• 4mm probe set

• USB cable

• Footswitch

• Operator’s manual

• CD with PC CircuitLink software and drivers

Page 2826

617-0054 TDS1002B $2,570.00617-0060 TDS1012B $3,190.00617-0098 TDS2012B $3,860.00617-0105 TDS2014B $4,270.00617-0127 TDS2024B $5,230.00

Page 2817

TDS100B AND TDS2000B SERIESGeneral purpose digital oscilloscopes for digital design and debug, education and training, manufacturing test and quality control, service and repair.

• Full sample rate and full record length on all channels for accurate acquisition, all the time

• Highly portable, lightweight and compact form factor frees up valuable desk space

• Convenient removable data storage via front panel USB flash drive port

• Supplied with: IEC mains lead, manual, 2 x P2200 X1/X10 passive probes

480-9356 Fluke 192B (60Mhz) $5,753.00480-9362 Fluke 196B (100Mhz) $6,620.00480-9378 Fluke 199B (200Mhz) $7,311.00

Page 2821

FLUKE 190 SERIES SCOPEMETERS2 channel 60, 100 or 200mhz digital storage oscilloscopes with 130mm monochrome display.

240-9522 Fluke 123 Scope $2,939.00

Page 2821

INDUSTRIAL SCOPEMETER 123Handheld 20Mhz dual channel digital storage Oscilloscopes Integrated dual-channel 5000 count True rms DMM.

• 5 hour battery operation and fast recharge

SAVE

11

OCILLOSCOPES & SCOPEMETERS


514-4896 Isotech 6051 $1,790.00 513-4653 Isotech IPS3202 $2,050.00

480-9384 Fluke 196C $6,937.00480-9407 Fluke 199C $7,740.00

Page 2819 Page 2708

ISOTECH 6051The ISR6051 oscilloscope with built in 6 digit frequency counter, cursor and numerical readouts make waveform observation and measurement fast and accurate.

• 50Hz to 50MHz frequency counter, 6-digits, accuracy ±0.01%

ISOTECH IPS3202Microprocessor based, programmable interface triple output lab power supply for high stability, low drift output.

• 192 x 128 LCD with simultaneous display of all 3 outputs (Volts, Amps, OVP)

619-5895 IDS8062 $2,510.00619-5918 IDS8102 $3,230.00 248-8985 ISR-622 $980.00

Page 2818

ISOTECH ISR 622A general purpose 20MHz dual channel oscilloscope with 6in rectangular CRT tube with red internal graticule.

• Triggering modes include: Auto, Norm, TV field, TV line

• Trigger level lock function eliminates troublesome triggering adjustment

• TV sync triggering for automatic triggering of TV-V and TV-H signals

• Probe calibration output

• Rise time 17.5ns

• Sensitivity 1mV to 5V/Div in 12 steps

• x10 sweep magnification

• 400V (dc + ac peak) max input

• Constructed to EN61010-1 (safety standard) 400V Cat II

ISOTECH IDS8062High performance colour TFT LCD display digital storage oscilloscopes. Fast 1GSample/ sec single shot sample rate for capturing fast signals and 25K maximum record length fulfils the requirement for waveform capture of multiple and complex wavefroms. The 25GS/s repetitive sampling mode maintains an effective high sample rate for fast timebase settings for repetitive signals. The front panel USB port provides printer and PC communications and enables unlimited waveform and panel setup storage to USB memory sticks.

• 2 or 4 channel models

• On line HELP menu

• FFT (frequency spectrum) display mode

• Acquisition Modes: Sample, Peak Detect, Average, Accumulate

• USB 2.0 port (host / device) front panel mounted provides Plug-and-Play PC connectivity, supports USB printer and USB flash memory devices

Page 2816

POWERFUL SCOPEMETER OPTIONS• Frequency spectrum analysis (FFT)

• Dual slope triggering for acquisition on both rising and falling edges, useful for analysing digital data streaming and single shot phenomena

• Complies with EN61010-1 (safety standard)

• 1000V CAT II and 600V CAT III

• Fast display update rate for seeing dynamic behaviour instantaneously

• 196C 100 MHz 1 Gs/s 10nS - 2 min /div

• 199C 200 MHz 2.5 Gs/s 5nS - 2 min /div

Page 2820

678-0743 U1602A 20MHz $3,018.00678-0752 U1604A 40MHz $3,774.00


NEWHANDHELD 2-CHANNEL DIGITAL OSCILLOSCOPES The new U1600A Series of handheld digital oscilloscopes are fully featured with built-in DMM and recorder functions, and offer maximum versatility for current and future requirements.

• 4.5˝ colour display

• 200MS/s sample rate

• 6000 count digital multimeter

• Data logger capability

• Waveform zoom and maths functions

• USB 2.0 interface

• FFT with 4 windowing techniques (U1604A)

OCILLOSCOPES & SCOPEMETERS


446-1601 IPS405 $920.00

Page 2708

Page 2712

216-6427 CPX200 $2,480.00508-4148 CPX400 $2,990.00

IPS405 PROGRAMMABLE SWITCHING DC PSU, 40V 5AFlexible single display programmable switching bench unit capable of 0-40V 0-5A output.

• Nominal input voltage AC 230V

• Supply voltage AC 115/230V, 50/60Hz, +15%

• Number of outputs 1

• Meter type LCD

• Resolution voltage/current 10mV/2mA

• RS232 interface

• Weight 4kg

• Dimensions (mm) W 225, H 100, D 305

357-0782 IPS606D $1,590.00

IPS606D SWITCHED MODE DC PSU, 60V 6ACompact and lightweight dual display digital metering switched mode bench unit capable of 0-60V 0-6A output.

• Nominal input voltage AC 115V, 230V +15%

• Supply voltage AC 115/230V, 50/60Hz, +15%


• Meter type LED

• Voltage and current can be displayed at the same time

• High regulationat 0.01%

• Weight 3.3kg


Page 2708

Page 2712

424-5926 EX1810R $1,170.00507-7106 EX2020R $1,650.00437-9007 EX4210R $1,710.00

EX1810, EX2020R and EX4210R PSU’sEX1810 provides 180W of power. High power efficiency means no cooling fan. EX2020R and EX4210R share the same compact design but can deliver over 400 watts of power. 42V enables the powering of some new automotive electrical parts, which use 42V (18 cell battery) in place of 14V (6 cell battery) thus reducing currents and wiring costs.

Common Features

• Supply voltage ac 230 +/- 10%


• Meter type Digital

• Single display

• Separate 4 digit LED voltage and current meters

• Switchable remote or local sensing

• Constant voltage or constant current operation

• DC output switch


EX1810R

• Output voltage 0-18V

• Output current 0-10A

• Weight 3kg

EX2020R



• Weight 3.6kg

EX4210R



• Weight 3.6kg

357-0776 IPS361D $1,590.00

IPS3610D SWITCHED MODE DC PSU, 36V 10AThis compact and lightweight switched mode bench PSU is capable of 0-36V, 0-10A output and has a dual display.

• Supply voltage ac 115/230V, 50/60Hz, ±15%


• Meter type LED

• Voltage and current can be displayed at the same time

• High regulation at 0.01%

• Weight 3.3kg


Page 2708

204-729 IPS1603D $1,290.00

IPS 1603D PSUA rugged, high specification digital instrument with all the features of the popular 1810H, but with individual LED displays of voltage and current.

• Constant current/voltage operation

• Coarse and fine controls of voltage and current

• Overload and short circuit protection

• Voltage range 0-60V, Current range 0-3A

Page 2708

CPX 200 and 400 SWITCHED MODE DC PSU DUAL OUTPUT, 70V 20A, 120V 40AVersatile dual display digital units in a robust steel case capable of 35V and 10A (CPX200) and 60V, 20A (CPX400A) output with noise and RFI specifications comparable with a good linear PSU.

Common Features

• Nominal input voltage 220-240V +15% 50/60Hz

• Supply voltage 230Vac 47-63Hz

• Number of outputs 2 (independent)

• CPX200 – series or parallel output connections up to 70V or 20A

• CPX400 – series or parallel output connectionsup to 120V or 40A

• Weight 5kg


CPX200

• Power range up to 175W per channel

• Series or parallel connections up to 70V or 20A

CPX400

• Power range up to 420W per channel

• Series or parallel connections up to 120V or 40A

13

POWER SUPPLIES


509-6949 PLUS 2 -40°C to +85°C internal sensor $389.00509-6961 PLUS 2 -50°C to +300°C external probe $550.00509-6983 PLUS 2 -40°C to +85°C, 0 to 100% RH $610.00219-721 Tinytag Plus/Tinyview Serial Downlaod Cable $26.80 619-3209 TH803 $3,290.00

TH803 TEMPERATURE / HUMIDITY CHART RECORDERAs the KT803 (above) and adds humidity and dew point recording.

• Measurement range -20 to +50ºC, 15-85% RH

• Accuracy ±1.0ºC, ±2% RH

• Selectable temperature ranges/recording time

Page 2677

TINYTAG PLUS 2 DATA LOGGERSRobust and waterproof, with a wide range of sensors and large memory for long term monitoring, Tinytag Plus 2 loggers are designed for harsh environments where many loggers would be easily damaged. The range has been updated, adding new features and providing improved performance at the same competitive prices.

• Higher resolution

• Faster download

• Large memory

• Battery monitoring facility

• All units are battery powered, making them ideal for use in remote locations.

Page 2684

Description RS Stock No Range PriceLascar Model

EL-USB-TC 126-717 Thermocouple Temperature -200 to +1300°C

EL-USB-1 466-6115 Temperature -35 to +80°C

EL-USB-2 490-1064 Temperature & RH -35 to +80°C & 0 to 100%RH

EL-USB-3 490-1070 Voltage 0 to 30VDC

EL-USB-4 536-3277 4-20mA 4 to 20mA

EL-USB-CO 536-3306 Carbon Monoxide 0 to 1000ppm

EL-USB-RT 126-723 Real-time Temperature & RH -10 to +60° & 0 to 100%RH

EL-USB-LITE 536-3283 Low Cost Temperature -10 to +50°C

EL-USB-2-LCD 500-711 Temperature, Humidity,Dew Point with LCD Display

-35 to +80°C & 0 to 100%RH

EL-USB-CASE 500-721 N/A Additional environmental protection for EL-USB-1 and EL-USB-2

• Free software compatible with all Lascar data loggers• No cables or cradles required - direct to USB connection

• Battery included

Lascar’s dedicated software provides all the tools needed to setup, download and graph your data. The latest version includes an export function to automatically move the data le into an Excel format.

electronics

Free Software Supplied!

EL-USB-2-LCD Temperature, Humidity and Dew Point

EL-USB RANGE

A standalone data logger that measures temperature (-35º to +80ºC) and humidity (0-100%RH), featuring an LCD to show max, min and latest readings and a button for push-to-start logging.

Final half page 2-LCD RS logger Advert.indd 1 13/02/2009 15:00:45

$196.00

$113.00

$151.00

$187.00

$ 27.40

$139.00

$191.00

$155.00

$ 94.90

$208.00

DATA LOGGERS AND RECORDERS


342-8883 Type K light duty, -200°C/+1100°C, 100mm x 1.5mm $133.00255-594 Type K light duty, -100°C/+800°C, 300mm x 1.5mm $118.00342-8899 Type K general purpose -200°C/+1100°C, 100mm x 3mm $135.00255-588 Type K heavy duty -50°C/+1000°C, 1m x 6mm $171.00

342-8928 Type K extended range -200°C/+1100°C, 300m x 3mm $135.00342-8912 Type T light duty, -200°C/+400°C, 100mm x 1.5mm $124.74342-8906 Type T general purpose -200°C/+400°C, 100mm x 3mm $140.00342-8940 Type T extended range -200°C/+400°C, 300m x 3mm $166.10

TYPE K AND T THERMOCOUPLE PROBES Cost effective probes suitable for both air and liquid measurement, waterproof construction and capable of being repeatedly bent and shaped for different applications.

• The smaller diameter probes offer fast response and greater flexibility

• The larger diameter probes may be used for semi-solids, such as tarmac and molten metals

• Probes can be calibrated with instruments listed as System Calibration

• Cable length 2 metres

204-599 Straight set $139.00204-583 Right angle set $139.00

GS38 FUSED TEST LEADS1000V CAT III 1.2m fused test lead set available with either straight 4mm plugs with retractable shroud, or with right angle shrouded plugs.

• Fitted with HRC fuses in each lead

• High quality silicone insulated cables, resistant to heat, oils, chemicals and abrasion, with yellow inner insulation to act as a wear guide

• Large screw-in crocodile clips with 20mm jaw opening and integral finger guards

• Strain relief at each end of leads

Page 2751

219-4545 $56.70

TYPE K MAGNETIC STRIP THERMOCOUPLE With a large flexible magnetic area which attaches quickly and easily to any ferro-magnetic surface.

• Temperature range -50°C to +100°C

• 2 metre PTFE covered lead with miniature plug

Page 2693

570-366 2˝ diameter sightglass $548.00570-360 3˝ diameter sightglass $731.00570-372 4˝ diameter sightglass $1,058.00

NEW

C RANGE INFRARED SIGHTGLASS Allows safe and effective thermal imaging of fully energised electrical systems through closed panels and doors, during routine electrical maintenance/inspection. For indoor and outdoor use.

• Certified by UL, SIRA and Lloyds of London

• Arc-flash tested to 40kA, IEEE C37 AND IEC62271-200 compliance

• Protected to IP65 (BSEN60529), UL recognised for NEMA 3/12 equipment

• Field of view equal to 6 times the cabinet depth

• Broadband optic suitable for all IR cameras. With CLIRVU® coating

• Aluminium frame to BS6082-T6, anodised to DEF STAN 03-25/3 aa 8-13

online at www.rsnewzealand.com 518-637 PT7600 labelling machine $690.00157-2253 TZ tape black-on-white 12mm x 8m $56.60194-4169 TZ tape black-on-white 24mm x 8m $74.50194-4175 TZ tape black-on-yellow 24mm x 8m $74.50

PT7600 LABELLING MACHINEBuilt for professional use, the PT7600 is a great new addition to the P-touch labelling range. Rugged and durable, it comes with a protective rubber grip that not only offers protection, but also helps ensure the machine won’t slip from your grasp.

• Supports TZ laminated tapes in 6mm, 9mm, 12mm, 18mm and 24mm sizes

• Easy to read 16 character 2 line backlit LCD screen

• Up to 164 symbols, including typical audio/video symbols

• 8 print sizes, 15 border/frame styles

• ABCD style keypad

• Rechargeable battery pack

• 10 special memory locations

• Supplied with 2 TZ tapes

Page 2610

Page 2692

15

ACCESSORIES

AS

IA_0

055

– 11

/09

Terms and conditions: All products sold in this publication are subject to the terms and conditions of sale set out in the current RS Catalogue. Prices are valid at the time of print, but may be changed by RS at any time, and exclude GST which will be charged at the current rate. This issue is valid from 1st November 2009 to 31st March 2010.Free delivery anywhere in New Zealand for all orders over $125 exclusive of GST.

Page 2731

539-1929 Fluke 87-V Ex $2,359.00

508-3000 Fluke 725EX calibrator $6,384.00 454-7266 Fluke 707Ex Loop calibrator,0-24Ma $2,074.00

407-0429 EX -MX2 infrared thermometer, multi-laser $4,397.00407-0435 EX-MP4 infrared thermometer, laser dot $886.00

157-626 MX57CX True RMS multimeter $1,920.00

FLUKE 87-V EX MULTIMETERThe Fluke 87V Ex is an intrinsically safe version of the ever popular Fluke 87-V. A general purpose measurement tool that can be used in environments such as (petro-)chemical plants, the pharmaceuticals industry and other locations subject to risk of explosion.

Group and Category: II 2G EEx ia IIC T4

MX-57EX MULTIMETERA high performance, intrinsically safe multimeter classified for use in mines affected by fire damp (EEx ib – marking Ex I M2) and surface industries, zones 21 and 22 (dust). Dual approval to both ATEX and IECEx standards and complies with IEC61010-1 CAT III 600V.

Group and Category: II 2G EEx ib IIC T6 or EEx ib I

Page 2737

MULTI-FUNCTION PROCESS CALIBRATOR• Single handheld instrument provides easy to read

measure/source screen so you can view input and output simultaneously

• Measure/Source mA, volts, RTDs, thermocouples, frequency and ohms to test sensors and transmitters on-site

Group and Category: II 1G EEx ia IIB 171ºC

Page 2639

0-24MA LOOP CALIBRATOR• An easy to use, compact instrument, which provides

a simultaneous mA and % readout

• Push button operation with 25% steps for fast linearity checks, and 0-100% span check

• Internal loop supply to power and read a transmitter at the same time without carrying a multimeter


Page 2643

Stock no. Description Pressure range

451-1245 DPI 610 I/S pressure calibrator 0-7 bar $10,480.00451-1251 DPI 610 I/S pressure calibrator 0-20 bar $9,850.00

DPI 610 I/S PRESSURE CALIBRATORA rugged, versatile instrument for use in hazardous areas with a task driven user interface which allows easy set-up of calibration, switch testing, leak testing, 4 to 20mA simulation, relief valve testing, data logging and ambient temperature recording modes. Pressure and current displayed simultaneously, data storage and download via RS-232.Group and Category: II 1G EEx ia IIC T4

Page 2641

431-943 3208 ISR Ex thermometer type K only $1,060.00

INTRINSICALLY SAFE DIGITAL THERMOMETERThis intrinsically safe thermometer is approved for use in potentially explosive atmospheres(group IIC gas types) in Zone 1 hazardous areas.

• Simple to use with choice of two resolution scalings (0.1ºC and 1ºC)

• Ranges: -50°C to +199.9°C and -50°C to +950°C


INFRARED SINGLE LASER THERMOMETERCompact, quick and easy to use in IS certified areas for the identification of hot spots, the single laser dot indicates the centre of the measured target area.

• Measuring range of -18°C to +260°C

• 8:1 distance to spot size and fixed emissivity at 0.95


Page 2686 Page 2686

INFRARED MULTI LASER THERMOMETERWith circular multi-laser sighting showing the spot size at all distances and with fast graphical display, this is a professional model for IS use, even at greater distances or for smaller objects.

• Measuring range of -30°C to +900°C with 0.1°C/F display resolution and adjustable emissivity

• Pin-points targets down to 19mm in diameter at 1.15m


Page 2685

HAZARDOUS AREA PRODUCTS

TEST & MEASUREMENT - documents.rs-components.comdocuments.rs-components.com/EITC/XA/testn... ·...

Documents

Transcript of TEST & MEASUREMENT - documents.rs-components.comdocuments.rs-components.com/EITC/XA/testn... ·...