Test Instruments & Tools · Testing Instruments 3 LOT 5100 Series OTDR Description With the fast...
Transcript of Test Instruments & Tools · Testing Instruments 3 LOT 5100 Series OTDR Description With the fast...
LOT 3100 Series OTDR ........................................................................................................................................... 1
LOT 5100 Series OTDR ........................................................................................................................................... 3
LV series Visual Fault Locator ............................................................................................................................... 6
LS series Laser Source ............................................................................................................................................ 7
LP series Optical Power Meter .............................................................................................................................. 8
LM series Optical Multimeter .................................................................................................................................. 9
LFP series Fiber Microscope Probe .................................................................................................................. 10
LSD-1S 3D Interferometer for Fiber Optic Connector End Face ........................................................... 11
One-click Fiber Optic Cleaner .............................................................................................................................. 12
One-click MPO/MTP Cleaner ............................................................................................................................... 13
Optic Fiber Connector Cleaner ............................................................................................................................ 14
Fiber Cleaver .............................................................................................................................................................. 15
Fiber Stripper .............................................................................................................................................................. 16
Kevlar Scissors .......................................................................................................................................................... 16
Drop Cable Stripper ................................................................................................................................................. 16
Fiber Scriber ................................................................................................................................................................ 17
Longitudinal Buffer Tube Slitter ........................................................................................................................... 17
Buffer Tube Slitter ..................................................................................................................................................... 17
Launch Fiber Cable Box ......................................................................................................................................... 18
Contents
Testing Instruments
1
LOT 3100 Series OTDR
The LOT 3100 Series OTDR is a high-performance, easy-to-use
diagnostic tool designed for fiber maintenance, locating faults and
general troubleshooting. Its user-friendly interface has been
designed for quick, simple testing. Water, shock and dustproof, the
rugged LOT-3100 Series OTDR is a reliable tool for inside / outside
plant and FTTx applications.
Features
❖ Graphic display of test results
❖ Dynamic range up to 28dB (Single-mode) / 24dB (Multimode)
❖ Quick start: <5 seconds
❖ Perfect user interface, handheld & lightweight (1kg)
❖ Hotkeys: Easy operation, push-and-test
❖ 1000 test records storage
❖ Bellcore file format (.sor)
❖ PC software for batch data processing
❖ USB/RS-232 data interface, driver-free
❖ Multiple languages: EN/DE/IT/FR/ES/PT/RU/KR/VN/CN etc.
❖ 10 hours continuous operation with battery
❖ Dust-proof, shock proof (2m drop test)
Management Software
Management software can display, analyze and edit trace files,
generate and print comprehensive test and analysis reports in
various forms.
❖ Trace viewing, events analysis
❖ Batch editing and printing
❖ Multi traces comparison
❖ Bidirectional testing (Optional)
❖ CSV/ASCII report formats
Testing Instruments
2
Specification
Model LOT3100-SD28 LOT3100-SD35
Single mode
Wavelength (±20nm) 1310/1550 1310/1550
Dynamic Range (dB) 28/28 35/34
Dead Zone EDZ: 1m; ADZ: 4.5m
Connector FC/PC (Interchangeable SC, ST)
Distance Testing Accuracy ± (1m + 5×10-5×Distance + sampling space)
Attenuation Accuracy ±0.05 dB/ dB
Reflectance Accuracy ±4 dB
Data Storage 1000 records
Connectivity RS-232/USB
Power Supply NiMH Rechargeable Battery/ AC Adapter
Battery Life 10 hours continuous operation; 20 hours standby
Operating Temperature -10℃ ~ 50℃
Storage Temperature -20℃ ~ 70℃
Relative Humidity 0 to 95% (non-condensing)
Weight 1kg (2.2 lbs.)
Dimensions (H x W x T) 220×110×70mm (8.7×4.3×2.7 inch)
Optional Functional Module
Visible Fault Locator Module
Wavelength 650 ±20 nm
Output Power ≥ - 3 dBm
Max Measurement Range 5 Km
Optical Power Meter Module
Calibrated Wavelength (nm) 850,1300,1310,1490,1550,1625
Power Range (dBm) -70 ~ +6 (-60 ~ +6 @ 850nm)
Detector Type InGaAs
Display Resolution 0.01dB
Accuracy ± 5% ± 0.01nW (±0.5dB@850nm)
MOD Identification 1K, 2K Hz
* Specifications subject to change without notice
Standard Package
OTDR, Rechargeable battery, power adapter, Management software CD, USB cable, Warranty card, CE certificate,
Certificate of calibration, user’s guide
Testing Instruments
3
LOT 5100 Series OTDR
Description
With the fast growing fiber optic network,the demand for reliable and
ease-of-use field test instruments keeps increasing. LinkU LOT5100
OTDR is designed to help technicians make test quickly and
accurately with simple steps. It combines various function modules in
one unit, including OTDR, Optical Power Meter, stable Laser Source,
Visual Fault Locator and fiber microscope (optional), all the modules
are very useful in optical fiber evaluation.
Features
Multi-Function OTDR Testing
❖ Auto/Manual testing and analysis
❖ Icon-display Fiber Mapper for easy interpretation of network
events (optional)
❖ Multiple analysis functions on testing results:
Segment/Event point return loss,Multi curves comparison
❖ In-Line Measurement of PON systems through splitters
❖ Fault locating, fiber length/loss/return loss measurement
❖ Connector/ splice/ splitter/ macro bend/ fiber-end detection
❖ GR-196-CORE (.SOR) file format
❖ Flexible file Naming
❖ Screenshot and auto-saved
❖ Built-in Power Meter, Laser Source and VFL modules
High Performance Platform
❖ 5.6-inch touch screen
❖ Lightweight, 1.1kg
❖ Excellent Man-Machine interface for easy operation
❖ Short dead zone: EDZ 1m, ADZ 5m
❖ 16G internal storage capacity
❖ Full range of models with multiple wavelengths selectable
850/1300/1310/1550/1490/1625/1650nm (customized)
❖ Damp-dust-shock proof
❖ Over 8 hours continuous operation
PC Software
❖ Multi traces analysis
❖ Single/multi traces printing in one report
❖ Batch editing and printing
❖ Bidirectional traces analysis
❖ CSV report formats
Stabilized Laser Source Module
❖ Wavelength same as the OTDR
❖ High precision and easy operation
Optical PowerMeter Module
❖ Multi-wavelength Calibration
❖ High Precision and easy Operation
Testing Instruments
4
Specification
General
Display 5.6-inch TFT Touch Screen (640×480)
Connectivity USB(Type A×1,Type B×1)
Storage Capacity 16 GB
Power Supply Rechargeable Li-Ion Battery: 7.4V/2500mAh * 2pcs /AC Adapter
Battery Life 10 hours continuous operation
Operation Temp. -10°C - 50°C
Storage Temp. -20°C - 70°C
Humidity 0 - 95% (Non-Condensing)
Weight 1.1kg(including battery)
Dimensions (L×W×H) 215×155×68mm
OTDR Module Wavelength
(±20nm)
Dynamic Range (1)
(dB) EDZ (m) (2) ADZ(m) (2)
LOT5100-SD28 1310/1550 28/26 1 5
LOT5100-SD32 1310/1550 30/32 1 5
LOT5100-SD35 1310/1550 35/33 1 5
LOT5100-SD40 1310/1550 40/38 1 5
LOT5100-MD26 850/1300 26/20 2 10
LOT5100-SM28 1310/1550/850/1300 28/26/20/26 1 (SM) /1.2 (MM) 5 (SM) / 6 (MM)
LOT5100-SM35 1310/1550/850/1300 35/33/20/26 1 (SM) /1.2 (MM) 5 (SM) / 6 (MM)
LOT5100-ST35 1310/1550/1625 35/33/32 1 5
Pulse Width SM: 3ns, 5ns, 10ns, 20ns, 50ns, 100ns, 200ns, 500ns, 1μs, 2μs, 5μs, 10μs, 20μs
MM: 3ns, 5ns, 10ns, 20ns, 50ns, 100ns, 200ns, 500ns, 1μs, 2μs, 5μs, 10μs
Min. Sampling Resolution 0.05 m
Max. Sampling Point 256,000
Linearity ≤0.05dB/dB
Loss Resolution 0.001dB
Distance resolution 0.01 m
Distance Accuracy ± (1m+measuring distance×3×10-5+sampling resolution) (excluding IOR uncertainty)
Attenuation Accuracy ±0.05 dB/dB
Reflectance Accuracy Single mode: ±2dB, Multi-mode: ±4dB
Connector FC/UPC
Note:
(1) Dynamic range is measured with maximum pulse width, averaging time is 3 minutes, SNR=1;
The level difference between the RMS noise level and the level where near end back-scattering occurs.
(2) Event dead zone is measured with pulse width of 3ns; attenuation dead zone is measured with pulse width of 5ns.
Testing Instruments
5
Standard Modules
Visual Fault Locator
Wavelength 650nm
Output Power 10mw @CW
Frequency CW/2Hz
Stabilized Laser Source Module
Wavelength 1310nm,1550nm
Output Power -5dBm±2dB @CW
Frequency CW/270Hz/1KHz/2KHz
Power Meter Module
Calibrated Wavelength 850nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm, 1650nm
Measurement Range A: -70dBm - +10dBm (-60dBm - +6dBm @ 850nm)
B: -50dBm - +23dBm (-40dBm - +20dBm @ 850nm)
Detector Type InGaAs
Display Resolution 0.01dB
Accuracy ± 5% ± 0.01nW (±0.5dB@850nm)
Optional Modules
Optical Connector Inspector Module
Field of View 400µm×300µm
Resolution ≤1.5µm
Focusing Manual Focus
Microscope Dimensions Ø32×175mm
Other Modules
Fiber Microscope; GPS Module; Fiber Mapper
*Specifications subject to change without notice
Standard Package:
Main Unit, Lithium Battery*2, Touch Pen, 16G Storage Card, Manual, Software, Mini USB Cable, Power
Adaptor, Carrying Bag, Calibration Report
Testing Instruments
6
LV series Visual Fault Locator
Description
The Visual Fault Locator is usually used to find the broken point in optical
fiber/cable, patch cord, and etc. It is a perfect complementary tool for
OTDR because of its capability of finding breaks in the dead zone of
OTDR.
Features
❖ Mini size design, portable and durable
❖ Universal connector, ceramic tube replaceable
❖ CW/2Hz modulated output
Specification
Model # LV - 01 LV - 10 LV - 15 LV - 30
Laser Launcher Level CLASS IIIA CLASS IIIB CLASS IIIB CLASS IIIB
Output Power (1) 1mW 10mW 15mW 30mW
Detecting Range (2) About 5km About 12km About 14km About 15km
Laser Launcher Type LD
Optical Connector universal 2.5mm adapter
Output Wavelength 650nm±10nm
Modulation Frequency CW / 2Hz
Power Supply 2 * AAA Batteries
Working Temperature -10℃~+50℃; <90%RH
Storage Temperature -20℃~+70℃; <90%RH
Dimension & Weight 113×34×20 mm (L×W×H) ; 70g
Standard Accessories:
carrying bag, manual
Optional Items
FC Adapter, SC Adapter, FC(Male) to LC(Female) Adapter for LC Connector
Note:
(1) The output power is figured out by multi-mode optical fiber at 23℃±3℃
(2) Detecting range will be different with different fibers.
Testing Instruments
7
LS series Laser Source
Description
Laser Source is used to test loss and multi-fiber continuity in optical fiber
systems. LS series provides high stability and portability for accurate
fiber optic testing.
Features
❖ Wavelength-identification digital encrypted protocol
❖ Auto power-off, Back-light
❖ TWO wavelengths on a single port, or FOUR wavelengths on two ports
Specification
Model # LS-2M LS-2S LS-2Q LS-2T
Output Wavelength 850/1300nm 1310/1550nm 850/1300/1310/1550nm 1310/1490/1550
Laser Type LD
Output Stability
Short term (15 mins): ±0.02dB@1310/1550nm
±0.1dB@850/1300/1490/1625nm
long term (5 hrs.): ±0.1dB@1310/1550nm
±0.2dB@850/1300/1490/1625nm
Central Wavelength ±20 nm
Spectral Width 3 nm
Output Frequency 270 Hz, 1KHz, 2KHz
Output Power -5dBm±0.5dB
Operating Temperature -10 to +50°C ; <90% RH
Storage Temperature -20 to +70°C ; <90% RH
Power supply 2 * AA Batteries;
Dimension &. Weight 160×58×32 mm (L×W×H); 180g
Standard Accessories:
FC/PC &.SC/PC Adapter, Carrying Bag, Manual
Testing Instruments
8
LP series Optical Power Meter
Description
Optical Power Meter is used to test power, loss, continuity and faults on
all types of fiber optic systems. LP series provides high accuracy and
simplicity of use.
Features
❖ Auto-wavelengths recognition
❖ Auto power-off, Back-light
❖ Integrated with high performance optical detector and visual fault locator (LP-V)
Specification
Model # LP-2T LP-2C LP-2TV LP-2CV
Calibrated Wavelength 850/1300/1310/1490/1550/1625 nm
Detector Type InGaAs
Accuracy ±0.35db±1nW
±0.35db±10nW
±0.35db±1nW
Resolution 0.01dB
Linearity ±5%
Connector Interchangeable FC/PC, SC/PC, ST/PC &. 2.5mm universal
Measuring Range -70 to +10dBm
@1550nm
-50 to +26dBm
@1550nm
-70 to +10dBm
@1550nm
-50 to +26dBm
Tone Detection 270Hz, 1KHz, 2KHz
VFL Output Power (1) N/A N/A 1mW 1mW
VFL Output Wavelength N/A N/A 650nm ±10nm 650nm ±10nm
Operating Temperature -10 to +50℃
Storage Temperature -20 to +70℃
Power supply 2 * AA Batteries; AC/DC Adapter
Dimension &. Weight 160×58×32 mm (L×W×H); 160g
Standard Accessories:
FC/PC &. SC/PC adapter, carrying bag, Manual
Optional Items
FC(Male) to LC(Female) Adapter
Note: (1) The output power of the VFL can be customized.
Testing Instruments
9
LM series Optical Multimeter
Description
LM series Optical Multimeter, integrates an optical power meter, a laser
source and a visual locator, is an ideal instrument used to test power,
loss, continuity and faults on fiber optic systems.
Features
❖ Auto-wavelengths recognition
❖ Auto power-off, Back-light
❖ Integrated with visual fault locator
Specification
Model # LM-2TD LM-2CD LM-2TP LM-2CP
Optical
Power
Meter
Calibration Wavelength 850/1300/1310/1490/1550/1625nm
Connector interchangeable FC/SC (ST optional)
Display Units dB/dBm/mW/uW
Display Precision 0.01dB
Accuracy ±5%±1nW
Wavelength Recognition 1310/1490/1550 (input power≥-40dBm)
Tone Detection 270Hz/1KHz/2KHz (input power≥-40dBm)
Measuring Range -70 to +10dBm -50 to +26dBm -70 to +10dBm -50 to +26dBm
Laser
Source
Output Wavelength 1310/1550nm 1310/1490/1550nm
Connector fixed FC/PC (interchangeable FC/SC/ST customized)
Modulation Frequencies 270Hz/1KHz/2KHz
Output Power -5dBm±0.5dB
Output Stability ±0.1dB@1310/1550nm; ±0.15dB@1490nm
Power Supply 2 * AA Batteries; AC/DC Adapter
Operating Temperature -10℃~+50℃
Storage Temperature -20℃~+70℃
Dimension &. Weight 160×58×32 mm (L×W×H);160g
Standard Accessories:
FC/PC &. SC/PC adapter, carrying bag, Manual
Testing Instruments
10
LFP series Fiber Microscope Probe
Description
This product is a portable,video microscope used to inspect
all kinds of fiber optic terminations, especially for the female
ones. It eliminates the need to access the backside of patch
panels or disassemble hardware devices prior to inspection.
Features
❖ Convenient using both for male and female adapters;
❖ Widely used in DWDM,SDH,SONET etc.
❖ Available for USB 2.0 interface on PC and data saving
❖ Analysis system software
❖ Compact & rugged
Order information
Note: The tips marked with “ * ” are standard items.
Model # LFP-30A LFP-30D
Screen Display 3.5” TFT-LCD, 960*240 pixel PC Screen
Resolution Ratio 0.75 um 0.75 um
Magnification 200x or 400x 200x
Video Output AV: NTSC/PAL USB 2.0
Power Supply 12.6V Li Battery USB
Standard Items
1. Probe high definition
2. Memory Monitor
3. 12V AC/DC Power Adapter
4. Standard Tips
5. Packing Black Hard Case
1. Probe high definition
2. Analysis Software
3. Standard Tips
4. Packing Soft Carrying Bag
Tips No. Description
U2-U-M * For 2.5mm, FC/SC/ST/E2000 UPC Connector
U1-U-M * For 1.25mm, LC/MU UPC connector
U2-U-F * For 2.5mm, FC/SC/ST/E2000 UPC Adaptor
LC-U-F * For 1.25mm, LC UPC adaptor
U2-A-M For 2.5mm, FC/SC/ST/E2000 APC Connector
U1-A-M For 1.25mm, LC/MU APC connector
SC-A-F For SC APC Adaptor
FC-A-F For LC APC adaptor
MT-U-M For MPO/MTP UPC Connector
U2-U-F60 For 2.5mm, FC/SC/ST/E2000 UPC Adaptor, 60 degree
LC-U-F60 For 1.25mm, LC UPC adaptor, 60 degree
Testing Instruments
11
LSD-1S 3D Interferometer for Fiber Optic Connector End Face
Description
LSD-1S is a 3D interferometer for inspection of single fiber
connector end face. It comes with a variety of connector
holders including ST, FC, SC, LC, MU, etc. And it’s suitable for
PC and APC connectors. With the “Chksys” analytical software,
it may supply accurate and stable measurement results.
Features
❖ High resolution optics and 3D visualization
❖ Variety of connector holders with high accuracy class
❖ Fast measurements, less than 500ms
❖ High accurate and stable measurement
❖ The optimized algorithm enhances the robustness
❖ No external power is required – USB Power supply
❖ Available for USB communication with PC and data saving
❖ Analysis system software
ChkSys Analysis System
❖ High resolution image, each of 4 images zoom in
❖ 3D image 360 degree browsing
❖ User registration with different operating authorization
❖ Custom threshold parameters
❖ Variety measure mode setting
❖ Measurement results editing and storage
❖ Generate report with data statistics and analysis
Specification
Standard Package:
LSD-1S Main Device, ChkSys Software, USBKEY, USB Cable, FC/SC/LC Connector Holder, Carrying Case,
Calibration Certificate, Warranty card
Measurement
Range
Repeatability Reproducibility
Apex Offset (um) 0 ~ 500 ±0.5 ±1.5
Radius of Curvature
(mm)
3 ~ ∞ ±0.01 ±0.02
Fiber Height (nm) -150 ~ +150 ±1.0 ±2.0
APC angle (deg) 7 ~ 9 ±0.01 ±0.02
APC Key Error (deg) ±1.0 ±0.01 ±0.02
LSD-1S 3D Interferometer
High accuracy Connector holders
ChkSys Analysis System
Tools
12
LOC-2.5-L Bent Type
One-click Fiber Optic Cleaner
Description
The cleaner is composed with special cleaning reel, extendable nuzzle
and guide cap of specified size. These make the cleaner meet rigorous
requirements of the cleaning solution.
Features
❖ Clean over 95% surface of fiber ferrule with only One Click
❖ Super long lifetime, over 800 times cleaning
❖ Universal ferrule mate connector adapter
❖ suitable for all 2.5mm/1.25mm fiber connectors
❖ Can handle any types of pollution
❖ Suitable for both male (ferrule) and female (adapter) connectors
Specification
Model # LOC-1.25 LOC-2.5 LOC-2.5-L
Dimension 180*17*17mm 220*30*20mm
Connector Type φ1.25mm, LC/MU φ2.5mm, SC/FC/ST/E2000
Cleaning Cycles 800 cycles
Weight 40g 44g
LOC-2.5 Application LOC-1.25 Application
LOC-2.5 / LOC-1.25
Tools
13
One-click MPO/MTP Cleaner
Description
LOC-M is specially designed to clean MPO/MTP connectors. Made of
non-alcohol high density clean cloth, it can effectively wipe 12 cores at
a time. It can clean both male and female MPO/MTP connectors. One
push operation offers great convenience.
Features
❖ Effectively clean all kinds of dust, oil and debris;
❖ Compatible with FOCIS-5 (MPO) connector;
❖ Easily clean adapters;
❖ For both male and female connectors;
❖ Smart and small, access to crowded panels;
❖ One push operation;
❖ Over 600 times clean per unit;
❖ Anti-skid (LOC-M-A)
Specification
Model # LOC-M LOC-M-A
Connector Type MPO / MTP, male and female
Compatible End Face Flat or 8 degree, with both guide pins and no pin
Cleaning Cycles 600+ cycles 500+ cycles
Dimension 223*57*15mm 200*45*20mm
Weight 44g 40g
Anti-Skid No Yes
LOC-M
LOC-M-A
Tools
14
Optic Fiber Connector Cleaner
Description
Optic Fiber Connector Cleaner uses a specially formulated dry cloth for
thorough and efficient cleaning of fiber optic connector end-faces. It
eliminates the need for hazardous cleaning fluids that can leave a
residue. The cloth is extremely effective in removing grease, dust and
other contaminants. It has been adopted by manufacturers in the
production line and carriers in the field.
Features
❖ Environmentally friendly
❖ Achieve high quality cleaning without alcohol or other solvents
❖ The cleaning tape is replaceable, which reduces long term costs
Specification
Model# LOC-B
Cleans per Reel 500 times
Applied Connectors SC, FC, ST, LC, MU, E2000, DIN, D4, MTRJ, MPO, etc without
pins Tape Length 10 meters
Weight 200g
Size (W*H*D) 125*70*29mm
Replacement Reel:
Model# LOC-B-R1
Cleans per Reel 500 times
Tools
15
Fiber Cleaver
Features
❖ Compact design
❖ High reliability
❖ Good cleaving performance
❖ 36,000 times cleave per blade
❖ High stability and precision
Description
Model# LFC200 LFC300
Fiber Diameter 250um/900um
Bare Fiber Diameter 125um
Cleave Angle Capability typically, <0.5˚ (single core)
Cleave Length 5~20mm
Blade Lifetime 36,000 times fiber cleaves (3,000 times 12-fiber cleaves)
Dimension 76W*66D*57.5H (mm)
Weight 255g 428g
Replacement Blade:
Model# LFC-B-020
Blade Lifetime 36,000 times fiber cleaves (3,000 times 12-fiber cleaves)
Dimension D=20mm, d=4mm, H=3mm
LFC300 LFC200
Tools
16
Fiber Stripper
Kevlar Scissors
Features
❖ Specially designed for cutting Kevlar in patch-cord, pigtail, and cables.
❖ Ergonomic design, comfortable for handling
❖ One micro-serrated blade reduces slippage for more positive cutting action
Drop Cable Stripper
Features
❖ Universal stripper for all types of FTTH Drop Cable
❖ With length scale
❖ Lightweight, durable and compact
❖ Simple jacket removing without fiber damaging
❖ 1,000 times for metal strength member;
❖ 2,000 times for non-metal strength member
Model # Description
LTS-212 For stripping 2-3mm fiber jackets to expose 600~900um buffer
For stripping 250um coating to expose 125um cladding
and 250um coating
LTS-213
For stripping 2-3mm fiber jackets to expose 600~900um buffer
For stripping 600~900um buffer to expose 250um coating
For stripping 250um coating to expose 125um cladding
LTS-212/213
Fiber Stripper
Model: LTS-301
Kevlar Scissors
Model: LTS-242
FTTH Drop Cable Stripper
Tools
17
Fiber Scriber
Features
❖ Pen shape,durable blade
❖ Suitable for any types of optical fiber
Order information
Longitudinal Buffer Tube Slitter
Features
❖ Slit loose tubes of ¢1.5mm~3.3mm longitudinally
❖ 4 guide rails for tubes with different diameter
❖ High quality metal blades, more durable
Buffer Tube Slitter
Features
❖ Adjustable blades can be set for any depth to help ensure nick-free strips
❖ Used in slitting twisted-pair wire, tightly wrapped stranded cables, CATV cable, etc.
Order information
Model # Description
LTS-112 Blade material: Ruby
LTS-113 Blade material: Tungsten steel
Model # Description
LTS-162 Applicable Cable: up to 1/8 inch (0~3.2mm)
LTS-113 Applicable Cable: 1/8 to 7/32 inch (3.2-5.6mm)
Model: LTS-401
Longitudinal Buffer Tube Slitter
Model: LTS-112
Model: LTS-113
Model: LTS-162
Buffer Tube Stripper
Model: LTS-163
Buffer Tube Stripper
Tools
18
Launch Fiber Cable Box
Description
The OTDR Launch Fiber box is used with Optical Time Domain
Reflectometers (OTDR's) to help minimize the effects of the OTDR's
launch pulse on measurement uncertainty. Available in many
different configurations and fiber lengths.
Features
❖ Compact and ruggedized, easy to carry
❖ Excellent waterproof and dustproof performance
❖ Auto Purge Valve for changes in altitude and temperature
❖ Non-metal construction will not corrode or conduce electricity
Specification
Fiber Type G.657A/G.652D (MM can be customized)
Typical Loss <0.5dB @ 1310nm for 1,000 meters
Connector Type FC/SC/LC selectable
Polishing Type APC/UPC selectable
Box Material SR Polypropylene
Color yellow
Dimension 23.8(L) x 14.1(W) x 6.7(H)cm
Weight 0.75kg / 0.35kg (without fiber)
Operating
Temperature
-40~+55°C
Order information Sample:LFB-A-SC-AS-010 ---- Launch Fiber Cable Box, G652D, SC/UPC-SC/APC,1.0KM
Fiber Type Connector 1 & 2 Length
A SM G652D SC SC/UPC 005 0.5KM
B SM G657A AS SC/APC 010 1.0KM
D SM G657B LC LC/UPC 015 1.5KM
P OM1 AL LC/APC 020 2.0KM
Q OM2 FC FC/UPC XXX Customized
R OM3 AF FC/APC
S OM4 ST ST/UPC
AT ST/APC
CX Customized