Tesmec-Stringing Equipment Catalogue 2011 · CONFIGURATION Negative self-acting hydraulic brake...

PULLERS

lstergiou

ENIA_adrs_GR

CONFIGURATION

Negative self-acting hydraulic brake

Hydraulic dynamometer with set-point and automatic control ofmaximum pull

Built-in reel winder with automaticlevel wind and special reel for 500 mof Ø 8 mm rope

ADDITIONAL DEVICES

102 Pulling rope locking devicewhen capstan is used (compulsory for EC market)

105 Rigid axle and towing bar detachable, for manual towing

107 Capstan (diameter=220 mmequipped with guide rope rollers)

111 Cable guide pivot pulley suitable for work in manhole and into ditch

200 mm

8 mm

CHARACTERISTICS

Bull-wheel diameter

Max rope diameter

500 kgMass (without rope)

13 kW (18 hp)

air

12 V

ENGINE

Gasoline

Cooling system

Electrical system

HYDRAULIC TRANSMISSION

Closed hydraulic circuit for steplessspeed variation in both rotatingdirections

HYDRAULIC PULLERARS 200

The machine is suitable to string one rope. The bull-wheel grooves are made of thermally treated steel

PERFORMANCE

Max pullSpeed at max pull

15 kN0.7 km/h

Note: the basic machine performance is calculated at 20°C and at sea level

Max speedPull at max speed

3.6 km/h4 kN

80 f

112 Type approved trailer for towing at max speed of 80 km/h with mechanical parking brake. Towing bar with inertial brakingsystem and towing hook, caravan type and eye hook Ø 40 mm. Lighting system trailer

ALL 111

TESMEC S.p.A.

[email protected]

HeadquartersVia Zanica, 17/O24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 Fax: +39.035.4522445

Manufacturing facilitiesVia Pertegalli, 224060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 Fax: +39.035.826375

Manufacturing facilitiesVia Provinciale, 26/2823844 Sirone (LC) - ItalyTel: +39.031.858311 Fax: +39.031.853562

JANUARY 2011 - PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE

CONFIGURATION



Hydraulic oil cooling system

Control instruments for hydraulicsystem and Diesel engine

Rigid axle for towing at max speedof 30 km/h

Built-in self-loading reel winder withautomatic level wind, suitable forstandard reel mod. BOF 010 andBOF 020

ADDITIONAL DEVICES

Equipment for electronic stringingparameter recorder

Mechanical actuated front ploughstabiliser

Pull pre-setting system

Grounding device on board

110 Rod with roller device for underground cables

AXR 001 Extra shaft

DLR 300 Electronic pull and speedrecorder

250 mm

10 mm

CHARACTERISTICS

Bull-wheel diameter

Max rope diameter

700 kgMass

25 kW (34 hp)

water

12 V

ENGINE

Diesel

Cooling system

Electrical system




ALL 110


PERFORMANCE


25 kN1.4 km/h



3.5 km/h10 kN

90 g


ALL 111

112 Type approved trailer for towing at max speed of 80 km/h with mechanical parking brake. Towing bar with inertial brakingsystem and towing hook, caravan type and eye hook Ø 40 mm. Lighting system trailer

DLR 300

TESMEC S.p.A.

[email protected]





CONFIGURATION





Rigid axle for towing at max speedof 30 km/h


325 mm

13 mm

CHARACTERISTICS

Bull-wheel diameter

Max rope diameter

850 kgMass

25 kW (34 hp)

water

12 V

ENGINE

Diesel

Cooling system

Electrical system





PERFORMANCE


35 kN1.2 km/h



3.6 km/h12 kN

91 g

ADDITIONAL DEVICES





110 Rod with roller device for underground cables

AXR 001 Extra shaft


ALL 110


ALL 111 112 Type approved trailer

for towing at max speed of 80 km/h with mechanical parking brake. Towing bar with inertial brakingsystem and towing hook, caravan type and eye hook Ø 40 mm. Lighting system trailer

DLR 300

TESMEC S.p.A.

[email protected]





CONFIGURATION





Rigid axle for towing at max speedof 30 km/h with mechanical parkingbrake


AXR 001 Extra shaft

ADDITIONAL DEVICES

037 Preheating device for use upto -30° C

051 Equipment for remote controlvia cable (max. L. 15 m)




059 Equipment for radio control

071 Hydraulically actuated pullingrope clamp for reel changeoperation

400 mm

16 mm

CHARACTERISTICS

Bull-wheel diameter

Max rope diameter

2000 kgMass

48 kW (64 hp)

water

12 V

ENGINE

Diesel

Cooling system

Electrical system


Closed hydraulic circuit for steplessspeed variation in both rotatingdirections. This machine is provided with a pullpre-setting system that maintainsthe pre-set pulling value (also when the speed is reduced to “0”)by automatically adjusting the operation speed according to thefriction and unexpected loads whichmay develop along the line


The machine is suitable to string one rope. The bull-wheel grooves are made of thermally treated steel. The machine is completely electronically controlled

PERFORMANCE


45 kN2 km/h

Note: the basic machine performance iscalculated at 20°C and at sea level


5 km/h17.5 kN

120 h


TESMEC S.p.A.

[email protected]





PERFORMANCE CONFIGURATION





Rigid axle for towing at max speed of 30 km/h

Built-in self-loading reel winder withautomatic level wind, suitable forstandard reel mod. BOF 010 and BOF020



Mechanical actuated front plough stabiliser


CHARACTERISTICS


70 kN1.8 km/h

Bull-wheel diameter 400 mm

Max rope diameter 16 mm

Mass 2100 kg

60 kW (81 hp)

water

12 V

ENGINE


Diesel

Cooling system

Electrical system




4 km/h32 kN


037


ADDITIONAL DEVICES

Preheating device for use upto -30° C

AXR 001 Extra shaft


121 c



ALL 111

DLR 300

TESMEC S.p.A.

[email protected]





CONFIGURATION







089 Connection of multiplemachines and electronicspeed synchronizing system

ADDITIONAL DEVICES




Hydraulically actuated front ploughstabiliser




450 mm

18 mm

CHARACTERISTICS

Bull-wheel diameter

Max rope diameter

3250 kgMass

104 kW (140 hp)

water

12 V

ENGINE

Diesel

Cooling system

Electrical system


Closed hydraulic circuit for steplessspeed variation in both rotatingdirections. This machine is provided with a pullpre-setting system that maintainsthe pre-set pulling value (also whenthe speed is reduced to “0”) by automatically adjusting the operationspeed according to the friction and unexpected loads which maydevelop along the line



PERFORMANCE


90 kN2.4 km/h



5 km/h44 kN

130 i

AXR 001 Extra shaft


TESMEC S.p.A.

[email protected]





CONFIGURATION

2 negative self-acting hydraulic brakes

2 hydraulic dynamometers with set-point and automatic control ofmaximum pull




2 built-in self-loading reel winderswith automatic level wind, suitablefor standard reel mod. BOF 010 andBOF 020

Equipment for electronic stringing parameter recorder



ADDITIONAL DEVICES




071 2 hydraulically actuated pullingrope clamps for reel change operation

540 mm

18 mm

CHARACTERISTICS

Bull-wheel diameter

Max rope diameter

4500 kgMass

82 kW (110 hp)

water

12 V

ENGINE

Diesel

Cooling system

Electrical system


2 closed hydraulic circuits for stepless speed variation in both rotating directions. This machine is provided with 2 pull pre-setting systems that maintain the pre-set pulling value(also when the speed is reduced to “0”) by automatically adjustingthe operation speed according to thefriction and unexpected loads whichmay develop along the line

HYDRAULIC PULLERARB 501

The machine is suitable to string one or two independent ropes. The bull-wheel grooves are made of thermally treated steel

PERFORMANCE

Max pullor

Speed at max pull

2 x 40 kN1 x 80 kN2.4 km/h



or

5 km/h2 x 15 kN1 x 30 kN

131

AXR 001 Extra shaft


TESMEC S.p.A.

[email protected]





PERFORMANCE CONFIGURATION





Rigid axle for towing at max speed of 30 km/h

Built-in self-loading reel winder withautomatic level wind, suitable forstandard reel mod. BOF 020

CHARACTERISTICS


140 kN2 km/h

Bull-wheel diameter 600 mm

Max rope diameter 24 mm

Mass 4800 kg

129 kW (173 hp)

water

12 V

ENGINE


Diesel

Cooling system

Electrical system




4,5 km/h60 kN


037


ADDITIONAL DEVICES

Preheating device for use upto -30° C




AXR 001 Extra shaft



132 c



ALL 111

DLR 300

TESMEC S.p.A.

[email protected]





001 Lighting system for the trailer

002 Pneumatic brake system for the trailer

AXR 001 Extra shaft

089

ADDITIONAL DEVICES


010 Hydraulic power pack to control a separate reel winder

022 Hydraulic quick connectors tocontrol a separate reel winderinstead of the built-in one


053 Equipment for electronic stringing parameter recorder


070 Roller device for second pullingrope


600 mm

24 mm

CHARACTERISTICS

Bull-wheel diameter

Max rope diameter

6000 kgMass

209 kW (280 hp)

water

24 V

ENGINE

Diesel

Cooling system

Electrical system


Closed hydraulic circuit for steplessspeed variation in both rotatingdirections. This machine is provided with a pull pre-setting system that maintains the pre-set pulling value(also when the speed is reduced to “0”) by automatically adjustingthe operation speed according to thefriction and unexpected loads whichmay develop along the line

CONFIGURATION

Negative self-acting hydraulic brakeHydraulic dynamometer with set-point and automatic control of maximum pullHydraulic oil cooling systemControl instruments for hydraulicsystem and Diesel engineRigid axle for towing at max speedof 30 km/h with mechanical parkingbrakeBuilt-in self-loading reel winder withautomatic level wind, suitable forstandard reel mod. BOF 010 andBOF 020Hydraulically actuated front ploughstabiliserGrounding device on board

HYDRAULIC PULLERSARS 700ARS 701


PERFORMANCE Mod. ARS 700


160 kN2.5 km/h



5 km/h80 kN

160 i

PERFORMANCE Mod. ARS 701


180 kN2.2 km/h


5 km/h80 kN


Connection of multiplemachines and electronicspeed synchronizing system

TESMEC S.p.A.

[email protected]





CONFIGURATION

2 negative self-acting hydraulic brakes

2 hydraulic dynamometers with set-point and automatic control ofmaximum pull




2 built-in self-loading reel winderswith automatic level wind, suitablefor standard reel mod. BOF 010 andBOF 020





AXR 001 Extra shaft

ADDITIONAL DEVICES





071 2 hydraulically actuated pullingrope clamps for reel change operation

600 mm

24 mm

CHARACTERISTICS

Bull-wheel diameter

Max rope diameter

8500 kgMass

209 kW (280 hp)

water

24 V

ENGINE

Diesel

Cooling system

Electrical system


2 closed hydraulic circuits for stepless speed variation in both rotating directions. This machine is provided with 2 pull pre-setting systems that maintain the pre-set pulling value(also when the speed is reduced to “0”) by automatically adjustingthe operation speed according to thefriction and unexpected loads whichmay develop along the line

HYDRAULIC PULLERSARB 600ARB 707

The machine is suitable to string one or two independent ropes. The bull-wheel grooves are made of thermally treated steel. The machine is completely electronically controlled

PERFORMANCE Mod. ARB 600

Max pullor

Speed at max pull

2 x 75 kN1 x 150 kN

2.6 km/h



or

4.5 km/h2 x 45 kN1 x 90 kN

165

PERFORMANCE Mod. ARB 707

Max pullor

Speed at max pull

2 x 90 kN1 x 180 kN

2.2 km/h


or

4.5 km/h2 x 45 kN1 x 90 kN


TESMEC S.p.A.

[email protected]







AXR 002 Extra shaft

ADDITIONAL DEVICES






070 Roller device for the secondpulling rope


800 mm

32 mm

CHARACTERISTICS

Bull-wheel diameter

Max rope diameter

9500 kgMass

280 kW (375 hp)

water

24 V

ENGINE

Diesel

Cooling system

Electrical system


Closed hydraulic circuit for steplessspeed variation in both rotatingdirections. This machine is provided with 2 pull pre-setting systems that maintain the pre-set pulling value(also when the speed is reduced to“0”) by automatically adjusting theoperation speed according to thefriction and unexpected loads whichmay develop along the line

CONFIGURATION











PERFORMANCE


240 kN 2.5 km/h



4.5 km/h130 kN

192 b

NEW

089



Connection of multiplemachines and electronicspeed synchronizing system

TESMEC S.p.A.

[email protected]







AXR 002 Extra shaft

ADDITIONAL DEVICES








960 mm

38 mm

CHARACTERISTICS

Bull-wheel diameter

Max rope diameter

13500 kgMass

328 kW (440 hp)

water

24 V

ENGINE

Diesel

Cooling system

Electrical system


Closed hydraulic circuit for steplessspeed variation in both rotatingdirections. This machine is provided with a pull pre-setting system that maintains the pre-set pulling value(also when the speed is reduced to“0”) by automatically adjusting theoperation speed according to thefriction and unexpected loads whichmay develop along the line

CONFIGURATION











PERFORMANCE


280 kN 2.2 km/h



5 km/h117 kN

194 h



TESMEC S.p.A.

[email protected]







AXR 002 Extra shaft

ADDITIONAL DEVICES








960 mm

38 mm

CHARACTERISTICS

Bull-wheel diameter

Max rope diameter

14000 kgMass

328 kW (440 hp)

water

24 V

ENGINE

Diesel

Cooling system

Electrical system


Closed hydraulic circuit for steplessspeed variation in both rotatingdirections. This machine is provided with apull presetting system that maintains the pre-set pulling value(also when the speed is reduced to“0”) by automatically adjusting theoperation speed according to thefriction and unexpected loads whichmay develop along the line

CONFIGURATION











PERFORMANCE


360 kN 2 km/h



4,3 km/h160 kN

199 e



TESMEC S.p.A.

[email protected]





Tesmec-Stringing Equipment Catalogue 2011 · CONFIGURATION Negative self-acting hydraulic brake...

Documents

Transcript of Tesmec-Stringing Equipment Catalogue 2011 · CONFIGURATION Negative self-acting hydraulic brake...