TESA IP67, TESA IP40, TESA Valueline IP40 · 2016-05-04 · TESA IP67, TESA IP40, TESA Valueline...

16
www.tesagroup.com 2.0 TLC-TWIN launch offer on page 4-5 Twin-Cal IP67 calipers, due to their built in connectivity, are becoming the standard in workshops. A cable or wireless connection allows the operator to capture all measurement results on a PC, thus guaranteeing the optimum in traceability TESA IP67, TESA IP40, TESA Valueline IP40: 3 lines of thinking ! Calipers, a standard in your workshop Order number Description Measuring range Measuring range Depth Rod mm in 00539090 VALUELINE IP40 150 6 Square 00530097 TWINCAL IP40 150 6 Square 00530319 TWINCAL IP67 150 6 Square 04760180 Emitter/receiver TESA TLC-TWIN Wireless transmission with TLC-TWIN 04760180 TESA IP67 Built in IP67 protection against liquids - Integrated TESA Link Connector (TLC) for a forward thinking approach to your overall quality control system – A new style housing with a stainless steel protection plate encased in PVC offering maxi- mum durability and unique “soft touch” TESA IP40 protection against dust (TLC) Connector for a forward thinking approach to your overall quality control system TESA Valueline IP40 TESA technological know-how at the best price! List price Promo Price 83 67 110 84 149 124 149 124 Valid until: 30.06.2014 Prices exclude VAT Version 23 - EN – 124 84 67

Transcript of TESA IP67, TESA IP40, TESA Valueline IP40 · 2016-05-04 · TESA IP67, TESA IP40, TESA Valueline...

www.tesagroup.com

C/ON ABS/

2.0TLC-TWIN launch offer on page 4-5

Twin-Cal IP67 calipers, due to their built in connectivity, are becoming the standard

in workshops. A cable or wireless connection allows the operator to capture

all measurement results on a PC, thus guaranteeing the optimum in traceability

TESA IP67, TESA IP40, TESA Valueline IP40:

3 lines of thinking !

Calipers,

a standard in your workshop

Order number

Description Measuring range

Measuring range

Depth Rod

mm in00539090 VALUELINE IP40 150 6 Square00530097 TWIN-CAL IP40 150 6 Square00530319 TWIN-CAL IP67 150 6 Square04760180 Emitter/receiver TESA TLC-TWIN

Wireless transmission with TLC-TWIN 04760180

TESA IP67 – Built in IP67 protection against

liquids - Integrated TESA Link Connector (TLC) for a forward thinking approach to your overall quality control system –

– A new style housing with a stainless steel protection plate encased in PVC offering maxi-mum durability and unique “soft touch”

TESA IP40 – protection against dust – (TLC) Connector for a forward

thinking approach to your overall quality control system

TESA Valueline IP40 – TESA technological know-how

at the best price!

List price €

Promo Price €

 83  67110  84149 124149 124

Valid until: 30.06.2014Prices exclude VAT

Version 23 - EN – !

!124

!84

!67

2

Order number

Description Measuring range

Measuring range

Thumb roller

Depth Rod

mm in00539091 VALUELINE IP40 150 6 – Round00539092 VALUELINE IP40 200 8 With Square00539093 VALUELINE IP40 300 12 With Square00530094 TWIN-CAL IP40 150 6 With Ronde00530095 TWIN-CAL IP40 200 8 With Square00530096 TWIN-CAL IP40 300 12 With Square00530320 TWIN-CAL IP67 150 6 – Round00530321 TWIN-CAL IP67 150 6 With Round00530322 TWIN-CAL IP67 200 8 With Square00530323 TWIN-CAL IP67 300 12 With Square00510041 Vernier caliper, 0,02 mm 150 –00510008 Dial caliper, CCMA-M CCMA-M, 0,02 mm 150 –04760181 Cable TESA TLC-USB04760182 Cable TESA TLC-Digimatic04760180 Emitter/receiver TESA TLC-TWIN04981001 Software DATA-Direct + dongle04981002 Software STAT-Express + dongle

TESA Calipers:

Digital, Dial, Vernier ModelsThe standards

List price €

Promo Price €

  83  67 103  83 159 129 110  84 137 111 211 171 149 124 149 124 209 173 289 240  62  49 115  86 109  98 109  98 149 124 518 4401147 975

!86

!67

!84

!124

!49

3

Bore depth measurement

Centre to centre measurement using a caliper with external jaws

Measurement of thickness- aluminium block

With internal jaws, external jaws,

depth calipers or designed for specialised

applications

Calipers for the workshop

Order number

Description Measuring range

Measuring range

Upper vernier

mm in mm00530423 T WIN-CAL IP67, with rounded measuring jaws for internal dimensions 300 1200530433 TWIN-CAL IP67, with knife-edge jaws for external dimensions 300 1200530443 TWIN-CAL IP67, with short cut measuring faces 300 1200530448 TWIN-CAL IP67, with rotary stop plate 250 1000530473 TWIN-CAL IP67, horizontal scale 300 1200510509 Caliper with rounded edge jaws for internal measurement 200 0,02 00510506 Caliper with rounded edge jaws for internal measurement 200 0,05 00510521 Caliper with rounded edge jaws for internal measurement 300 0,02 00510522 Caliper with rounded edge jaws for internal measurement 300 0,0500510133 Caliper with $at measuring faces 500 0,02 00510134 Caliper with $at measuring faces 500 0,05 00510143 Depth caliper with $at measuring faces 150 0,02 00510144 Depth caliper with $at measuring faces 150 0,05 00510541 Caliper with rounded edge jaws for internal measurement 250 0,02 00510542 Caliper with rounded edge jaws for internal measurement 250 0,05

List price €

Promo Price €

384 299435 324426 339438 349460 359133 104133 104182 144182 144501 399501 399 97  77 97  77139 109139 109

!299

!359

!324

!144

!339

!349

!77

4

C/ON ABS/

2.0

1 x

1 x

5 x

5 x

Order number

Description

S05137036 Special launch offer, TLC-TWIN kit

List price €

Promo Price €

2307 1240

Note: the sale of the starter kit is limited to EU countries!

TESA IP 67 Calipers equipped with a TLC-TWIN emitter/receiver

TESA TLC-TWIN

For wireless

data transmission

SPECIAL LAUNCH OFFER, TLC-TWIN KIT, Composed of : – 5x TESA TLC-TWIN wireless station 04760180 – 5x caliper TWIN-CAL IP67 150 mm 00530319 – 1x Software DATA-Direct 04981001 – 1x Receiver TWIN Station 05030010

TLC-TWIN – Bidirectional communication – Range up to 12 m, depending on the surroundings – Swiss Made

TWIN-CAL IP 67 – New generation of TESA calipers with built in IP67 protection

– TLC connector, connects the TLC-USB cable or TLC-TWIN wireless emitter/receiver

– Swiss Made

Software DATA-Direct – Transfer of measuring data to any interface – Compatible with the majority of TESA instruments or other brands equipped with RS 232 data output

– Can be customised (data with date and or hour), .csv %le format

Receiver TWIN Station – Up to 48 instruments equipped with TLC-TWIN can be received by the TWIN Station

– Connected to computer by USB port – Optimum protection with an aluminium housing – Swiss made

Example of data transmission TLC-TWIN, TWIN STATION and DATA-Direct

– Bidirectional communication of TLC-TWIN for data collection using a computer, no need for a cable !

– Con%rmation of data reception « REC » on the instrument display, following each press of the send-button (function can be de/re-activated)

– DATA-Direct acts as a keyboard emulator and sends data to any application ( for example: .xls.txt .doc)

!1240

5

List price €

Promo Price €

 149 124

 109  98 109  98 518 4401147 975 299 269

TWIN-Cal with TLC-USB or TLC-Digimatic cable

TWIN-CAL with TLC-TWIN wireless emitter-receiver

All accessories

For data transfer with

TWIN-Cal IP 67 and TWIN-Cal IP40

– The TWIN-Cal IP67 or IP40 calipers are built with a

TLC connector, which transfers data either via a cable

or in wireless mode.

– Data transfer by TLC-USB or TLC-Digimatic cable

– Wireless data transfer : using the TLC-TWIN

transmitter-receiver and the TWIN Station receiver.

– Collection and analysis of data with DATA-Direct or

STAT-Express software.

Note: the sale of the TLC-TWIN and TWIN Station is limited to EU coutries only!

Order number

Description

04760180 TESA TLC-TWIN Emitter-receiver

04760181 TESA TLC-USB cable04760182 TESA TLC-Digimatic cable04981001 Software DATA-Direct + Dongle04981002 Software STAT-Express + Dongle05030012 TWIN STATION

Receiver

DATA-Direct SoftwareDATA-Direct software is an easy way to collect and report results in real time from the majority of the measuring instruments in the TESA range which have RS 232 data output. Data-Direct is supplied not only with serial input/output drivers specially con%gured for TESA’s products, but also with drivers for products purchased from other manufacturers. It works effectively to provide data transfer for your data sheets, databases, statistical modules or any other Windows-based applications. With this user-friendly software you will be able to create your own inspec-tion reports.

Logiciel STAT-ExpressSTAT-Express allows the download, capture, transfer and archi-ving of your measuring results. STAT-Express offers the ability to create reports including measured values obtained from a single instrument or several hand tools, to assign tolerances, calculate statistics, print out various measurement reports, build control charts in real time, and much more. DATA-Direct is also included in the CD of STAT-Express software.

Example of data transmission with TLC-TWIN, TWIN STATION and STAT-EXPRESS

– STAT-Express provides a customised measuring programme – The bidirectional communication provided by TLC-TWIN allows the collection of data at a distance from the computer without the need for a cable.

– Con%rmation of data reception « REC » appears on the instru-ment display, each time the send button is pressed (function can be de/re-activated in STAT-Express).

– Classi%cation according to pre-set tolerances : «PASS» or «FAIL» appears on the instrument display each time the send button is pressed (function can be de/re-activated) in STAT- Express

TWIN-CAL caliper display during the transmission of of data

!440

!975

!269

!124

!98

!98

6

HIGH PRECISION

List price €

Promo Price €

218 165286 225303 240327 260139  99216 170236 185255 199105  79119  89

Order number

Description Measuring range

Maximum permissible error

Maximim permissible parallelism error

mm μm μm00310001 TESAMASTER 0 ÷ 25 2 100310002 TESAMASTER 25 ÷ 50 2 1,500310003 TESAMASTER 50 ÷ 75 3 1,500310004 TESAMASTER 75 ÷ 100 3 1,500110101 ISOMASTER 0 ÷ 25 400110102 ISOMASTER 25 ÷ 50 400110103 ISOMASTER 50 ÷ 75 500110104 ISOMASTER 75 ÷ 100 500160201 Stand for TESA micrometer072110123 Stand for Etalon micrometer

TESA vernier micrometers

With resolution up to 0,01 or 0,001 mm

Measurement of a small series of parts using a TESAMASTER and stand

!165

!89

!99

A

B

C

7

List price €

Promo Price €

920 735926 740934 747938 750943 754946 756954 763965 772979 783990 792118  94123  98132 105131 105137 109148 118181 144216 172

Order number

Description Measuring range

Measuring range

Maximum permissible error

Dimension C

mm in μm mm06130105 Digital IMICRO Capa 6 ÷ 8 0.2362 ÷ 0.3150 4 7906130106 Digital IMICRO Capa 8 ÷ 10 0.3150 ÷ 0.3970 4 7906130107 Digital IMICRO Capa 10 ÷ 12 0.3970 ÷ 0.4724 4 7906130108 Digital IMICRO Capa 11 ÷ 14 0.4330 ÷ 0.5512 4 9306130109 Digital IMICRO Capa 14 ÷ 17 0.5512 ÷ 0.6693 4 9306130110 Digital IMICRO Capa 17 ÷ 20 0.6693 ÷ 0.7874 4 9306130111 Digital IMICRO Capa 20 ÷ 25 0.7874 ÷ 0.9843 4 9106130112 Digital IMICRO Capa 25 ÷ 30 0.9843 ÷ 1.1811 4 9106130113 Digital IMICRO Capa 30 ÷ 35 1.1811 ÷ 1.3780 4 9106130114 Digital IMICRO Capa 35 ÷ 40 1.3780 ÷ 1.5748 4 9100840114 Setting ring 600840101 Setting ring 800840102 Setting ring 1000840116 Setting ring 12,500840104 Setting ring 1500840117 Setting ring 17,500840106 Setting ring 2500840107 Setting ring 35

IMICRO internal micrometers

The only micrometers that adhere

to the ABBE principle

!783

!144

8

List price €

Promo Price €

144 115291 232285 228111  89299 239321 256299 239

List price €

Promo Price €

236 189153 122253 202275 220302 241

Order number

Description Measuring range

Travel per revolution

Circular scale

Dial

mm mm Ø mm212GL Standard indicator 3 1 0÷50÷100 40 213 Standard indicator 1,5 0,5 0÷25÷ 50 27 215GL Standard indicator 1,2 0,2 0÷10÷ 20 40 222GL Perpendicular indicator 3 1 0÷50÷100 40 232GL Parallel indicator 3 1 0÷50÷100 40

COMPAC is back!

COMPAC comparators and indicators...

often copied, never equalled

Order number

Description Measuring range

Travel per revolution

Circular scale

mm mm353 Dial Gauge Ø 40, 0,01 mm 5 0,5 0 ÷ 25 ÷ 50355E Dial Gauge Ø 40, 0,002 mm 3 0,2 0 ÷ 10 ÷ 20367 Dial Gauge Ø 40, 0,001 mm 1 0,1 0 ÷ 5 ÷ 10512K Dial Gauge Ø 58, 0,01 mm 10 1 0 ÷ 50 ÷ 100555 Dial Gauge Ø 58, 0,002 mm 5,3 0,2 0 ÷ 10 ÷ 20556 Dial Gauge Ø 58, 0,001 mm 5 0,2 0 ÷ 10 ÷ 20712 Dial Gauge Ø 58, 0,01 mm 30 1 0 ÷ 50 ÷ 100

367

353

556

555

712

512K

232GL212GL 222GL213

355E!

232

!256

!239

!228

!115

!239

!89

!122

!189

!220

!241

99

SWISSTAST

TESATAST

DIGICO 605 MI

DIGICO 410 MI

DIGICO 505 MIE

DIGICO 205 MI

List price €

Promo Price €

117  88117  88149 119123  92136 109454 368497 403121  91362 285

List price €

Promo Price €

199 149332 229410 308439 329432 324479 359452 339

Order number

Description Measuring range

Measuring range

Resolution Maximum permissible error

mm in mm μm01930230 DIGICO 205 MI 12,5 0.5 0,01 20 01930231 DIGICO 305 MI 12,5 0.5 0,001 8 01930241 DIGICO 410 MI 25 1 0,01 20 01930255 DIGICO 505 MIE 12,5 0.5 0,001 4 01930256 DIGICO 605 MI 12,5 0.5 0,001 4 01930257 DIGICO 610 MI 25 1 0,001 5 01930258 DIGICO 705 MI 12,5 0.5 0,001 4

TESA DIGICO

A complete range of dial

gauges for comparative

measurement of simple and

complex features

Order number

Description Measuring range

Resolution Insert Circular scale

Dial

mm mm mm Ø mm01810006 Dial indicator TESATAST 0,8 0,01 12,53 0 ÷ 0,4 ÷ 0 38 01811000 Dial indicator SWISSTAST 0,8 0,01 12,53 0 ÷ 0,4 ÷ 0 28 01811001 Dial indicator SWISSTAST 0,2 0,002 12,53 0 ÷ 100 ÷ 0 38 01810009 Dial indicator TESATAST 0,2 0,002 12,53 0 ÷ 100 ÷ 0 28 01810010 Dial indicator TESATAST 0,2 0,002 12,53 0 ÷ 100 ÷ 0 38 01639054 Case with 01639023 support and TESATAST S1800169501639053 Magnetic support with %ne adjustment01639007 Magnetic support UJ 1501639035 Support column Ø20/H: 200 mm 100 x 150 x 40

TESATAST Dial

test indicators

Insensitive to magnetic

!elds - jewelled movement

with 7 rubies - very low

measuring force

* Delivered without indicator

!149

!308

!324

!368

!*91

!*403

!88

!88

!*285

!329

10

SWISS MADE

# 1 WORLDWIDE

TESA-Hite plus M

TESA-Hite 400

TESA-Hite 400 magna

List price €

Promo Price €

3988 31904614 36905612 44906237 49902800 22403290 2630

Order number

Description Measuring range

Maximum permissible error

mm μm00730043 TESA HITE 400 415 2,5+4L µm (L in m)00730044 TESA HITE 700 715 2,5+4L µm (L in m)00730057 TESA HITE PLUS M 400 + Printer 405 2,5+3L µm (L in m)00730058 TESA HITE PLUS M 700 + Printer 705 2,5+3L µm (L in m)00730047 TESA HITE 400 MAGNA 415 <800730059 TESA HITE 700 MAGNA 715 <8

TESA height gauges

The reference for your workshop due

to its quickness of operation, accuracy

and versatility

TESA-Hite magna 400/700 with unique IP65 protection against dust and liquids, specially adapted for the dif%cult environments in a workshop.

TESA-Hite 400/700 with opto-electronic measuring system, aerostatic tracks and integrated operator panel. The «must have» of height gauges for its simplicity, quickness and accuracy.

TESA-Hite plus M 400/700 with motorised movement and ad-vanced measuring functions.

Each TESA-Hite is delivered with a measurement certi%cate SCS (Swiss Calibration Service).

!3190

!2240

!4490

11

SWISS MADE

0

0

0

Y

X0

0

YW

XW

0YG

XG

A

6xø ... A

# 1 WORLD WIDE

List price €

Promo Price €

523 424

List price €

Promo Price €

5345 43905940 49909512 8490 952  8005226 42905702 47909035 7990 894  700

Versatile in the mea-surement of different bore-diameters and depths.

Easy and quick to use for measurements between axes.

Manual and

motorised Micro-Hite gauges

When robustness and versatility combine

with accuracy

Height Gauges Micro-Hite are the most reliable and robust instruments for the workshop. Their internal construction guarantees perfect mea-surement accuracy, even at higher temperatures.Micro-Hite 350/600/900 with motorised move-ment of the touch probe. Each Micro-Hite is delivered with a certi%cate of measurement SCS (Swiss calibration service).

Order number

Description Maximum permissible errorμm

00730033 Set MICRO-HITE 350 2+3L µm (L in m)00730034 Set MICRO-HITE 600 2+3L µm (L in m)00730035 Set MICRO-HITE 900 2+3L µm (L in m)00760163 Panel POWER PANEL00730063 Set MICRO-HITE Plus M 350 1,9+1,5L µm (L in m)00730064 Set MICRO-HITE Plus M 600 1,9+1,5L µm (L in m)00730065 Set MICRO-HITE Plus M 900 1,9+1,5L µm (L in m)00760221 POWER PANEL Plus M without printer

Small accessory kit for

height gauges

The essential and most suitable tooling

for machined component inspection

Accessory package for your TESA height gauge.This accessory kit is suitable for most characteristics requiring measurement in an industrial environment, such as small diameters, grooves, shafts or clearances. Delivered in a compact suitcase, easily transportable and transferable.

Order number

Description

00760232 Small Set of accessories

* Price with panel

!800

!*5790

!*5490

!424

!700

12

List price €

Promo Price €

6285 48902621 –1967 1574  20 –

 201  160

Order number

Description

06930012 TESA RUGOSURF 90G06930011 TESA RUGOSURF 10G06930013 TESA RUGOSURF 2004760099 Connection cable for

RUGOSURF 20 to computer06960062 Connection cable for

RUGOSURF 10G and RUGOSURF 90G to computer

RUGOSURF 20

Roughness gauge TESA RUGOSURF

Surface inspection in the workshop, inspection of incoming goods,

or in the laboratory

RUGOSURF 20 – Portable surface roughness tester designed for the production workshop

– Measuring range of 400 μm in the Z axis – Sturdy metal base – IP 67 membrane keypad – 15 most commonly used roughness parameters – 2'' LCD display, parameters and roughness pro%le displayed after each measurement

– Easy to use

RUGOSURF 10G - Portable Roughness gauge – range 400 microns in Z – 3 horizontal measuring positions to -90 °, 0 °, 90 ° – Measurement of the roughness parameter of the primary pro%le in addition to the roughness parameter

– 31 roughness parameters in total – TFT colour graphic display 2'' for easy reading – Display of parameters and roughness pro%les R and P after each measurement

– IP 67 Membrane keypad

RUGOSURF 90G - Compact, versatile and powerful roughness gauge

– 1000 μm span in the Z axis – Measuring range of 50 mm in the X axis – W ripple pro%les, P primary pro%le and R roughness pro%le measuring

– 3.5'' colour touch screen for ease of use – 3-position horizontal measurement at -90 °, 0 °, 90 ° – 49 roughness parameters – Special features of the RUGOSURF 90G : Supplied with SB 10/60 probe with removable skid: one single probe can be used to measure roughness or undulation

– RUGOSURF 90G can measure components with a height of up to 90mm, thanks to a vertical positioning bracket without the need for any additional accessory

– With the Pro%le Set 2mm (06960100) the RUGOSURF 90G becomes a pro%le measurement instrument with a width of 2000 μm measuring in the Z axis (optional)

RUGOSURF 90G Special probe for measure with or without skid

RUGOSURF 10G

!1574

!2621

!4890

13

List price €

Promo Price €

 657  525

 688  550

1393 1115

4817 3990

 243  195

 954  760

 398  338

Order number

Description

06960066 Roughness standard Ra=1.0 μm (40 μin)

06960034 Software RUGOSOFT + dongle

06960048 Software Measurement Studio + dongle

06960100 PROFILE SET 2 mm

06960041 Roughness standard Ra=2.97 μm (117 μin)

06960064 Roughness standard Ra=0.1 μm (4 μin)

06960056 100 mm extension for skid probe

Pro"l Studio with 2 mm Pro"le Set and RUGOSURF 90G

Measurement Studio

Rugosoft

Accessories for RUGOSURF surface

roughness testers

Software: exploit the roughness measure-

ments from the 2 mm Pro!le Set :

measure pro!les with RUGOSURF 90G

RUGOSOFT Software – Software for RUGOSURF 20 and RUGOSURF 10G. – Enables the user to import stored measurement values from the device to the computer for management in a database.

– Optimal and detailed visualization of the results: parameters, pro%les (P primary pro%le and R roughness) or a combination of both. Calculation of statistics from a set of measurements.

– Programme creation in the software, which can then be loaded onto the device.

– Customizable measurement report.

Software MEASUREMENT STUDIO – For RUGOSURF 90G. – Enables the import of stored measurement data from the de-vice onto the computer, for management in a database.

– Optimal and detailed visualization of the results: parameters, pro%les (W undulation, P primary pro%le and R roughness) or a combination of both.

– Calculation of roughness parameters. Calculation of statistics from a set of measurements.

– Programme creation in the software, which can then be loaded onto the device.

– Customizable measurement report.

Software PROFILE STUDIO (delivered with 2 mm Pro$le Set) – For pro%le measurement using the RUGOSURF 90G. – Allows micro and macro geometric identi%cation of a surface. – Measurement programme creation that can be saved for the same measurements on a batch of identical parts from the same set or for subsequent batch measurements.

– Measurement control and calibration controlled from the PC. – Import and export of parameter settings from and to the de-vice.

– Storage of measurement results and of the measured parame-ters as well as the database.

– Database search with %lters (date, operator, batch ...). – Detailed visualization of the measured pro%le and geometric construction tools (arc, line, point, intersection, angle ...).

– Measurements reports with customizable header.

2 mm Pro"le Set and RUGOSURF 90G

100 mm extension

!338

!1115

!550

!3990

14

TT90

WHEN YOU

NEED TO BE SURE

GT21 Interface palpeur USB

GTL21 USB

Order number

Description Number of probe inputs

04430009 TESATRONIC TT20 204430010 TESATRONIC TT60 204430011 TESATRONIC TT80 204430012 TESATRONIC TT90 2 Application example using inductive

probes

TESATRONIC TT display units

Intelligent display units, combined digital and

analogue display, for 1 or 2 inductive probes

TESATRONIC display units allow the value of single inductive probes to be read as well as combinations of 2 probes. They manage and synchronise the inductive probes and transmit the data to a computer or a machine tool.

– 2 probe inputs for single, sum or difference measurements.

– Large LCD display panel, easy to read, reducing errors.

– Choice of analogue or bar display. – Metric or inch conversion.

– Ability to set permissible limit values.

– RS 232 Interface opto-coupled, bidirectional Mains power supply adapter.

Order number

Description Measuring range

Maximum permissible linearity errors

Repeatability limit

mm µm μm03230200 GTL21 USB Probe, Measuring Force=0,63N ± 2 0,4 + 0,8· L (MPE) 0,103230201 GTL22 USB Probe, Measuring Force=0,63N ± 2 0,4 + 0,8· L (MPE) 0,103210904 GT21 Axial Probe, Measuring Force=0,63N ± 1 0,2 + 3 · L 3 0,0103210924 GT22 Axial Probe, Measuring Force=0,63N ± 1 0,2 + 3 · L 3 0,0103230036 GT21 High accuracy probe, Measuring Force=0,63N ± 0,2 0,07 + 0,4 · L 0,0103230021 GT22 High accuracy probe, Measuring Force=0,63N ± 0,2 0,07 + 0,4 · L 0,0103260500 USB Probe interface S-73.75 ± 2

Application example using inductive probesInductive probes : The bestsellers available in 3 versions

Standard: GT 21, GT 22, GT 21 USB, GT 22 USB

High accuracy : GT 21 HP, GT 22 HPTESA inductive axial probes : excellent repeatability, durability and longevity

– The measuring bolt is mounted on ball bearings, and is virtually in-sensitive to radial forces. protected against the penetration of solid and liquid contaminants by rubber sealing bellows.

– Probe inserts can be replaced or interchanged. A large choice of mo-dels with for different geometries, forms and sizes is available.

– Adaptable force by changing the key (GT-21 and GT-22)

– The USB probe allows direct connection to a computer through a USB port.

– This type of probe does not need the use of an electronic interface (BPX box) or a display unit (TESA-TRONIC)

WHEN ACCURACY

IS NOT OPTIONAL

List price €

Promo Price €

1287 10291787 14292145 17163701 2960

List price €

Promo Price €

528 422540 432313 250323 258580 464594 475344 250

TT60

TT80

TT20

!1029

!1429

!1716

!2960

10 -

150

mm

510

15

20IN

TERA

PID

0

510

1520

SWIT

ZERL

AND

0

Z (2:1)

Z

M 2.3

3.5

2.5

max

.

~ 65

15

Internal measurementExternal measurement

Order number

Description Application range

Application range

mm mm01110000 UNIMASTER Metric full set Internal dimensions 250 ÷ 1475 External dimensions 225 ÷ 1450

Application using UNIMASTER

TESA UNIMASTER

An extraordinary instrument

For large internal and external dimensions

UNIMASTER as used in the aeronuatical engineering sector:SR Technics in Zurich, who operate in the %eld of jet engine main-tenance, carry out the inspection, maintenance and repair of jet engines and use UNIMASTER instruments. It is delicate work that requires the highest levels of accuracy. Before measurement, the instrument is adjusted to the size of the component to be measured, using the extensions in the set. These extensions allow the the total measuring range of the instrument to be changed from 250 to 2500 mm. The measuring element includes a %xed stop and a mobile measuring bolt. The displacements of the mobile bolt, moving on ball bearings are transmitted to an integral dial test indicator thus guaranteeing a constant measuring force. Furthermore, it is possible to reverse the measuring force of the bolt to allow both internal and external measurement: another feature that makes the UNIMASTER particularly $exible. The robustness and durability of the UNIMASTER are equally greatly appreciated: "We have 11 UNIMASTER sets, one of which is over forty years old" says Andreas Schlagenhauf, Calibration Specialist at SR Technics. "This con%ms the great quality and reliability of TESA instruments." You can %nd the entire case study on our website www.tesagroup.com.We would like to thank SR Technics for their friendly cooperation

Order number

Description

079105704 INTERAPID IRA 2

IRA 2 bore gauge comparator, performs

two or three-point measurement

For checking through bores, blind bores

or grooves from 10 up to 150 mm

– Large measuring range of 10 to 150 mm. Ease of use thanks to the low weight and ergonomic shape.

– Resolution of 0,01 mm on the integrated comparator and %ne adjustment setting.

– Centring device for 2 point measurement.

List price €

Promo Price €

1912 1500

List price €

Promo Price €

19175 16 500

!16 500

!1500

TESA SA – Bugnon 38 – CH-1020 Renens – Switzerland – Tel. +41(0)21 633 16 00 – Fax +41(0)21 635 75 35 – www.tesagroup.com – [email protected]

TESA SA Switzerland Bugnon 38CH-1020 RenensVente SuisseTél. +41 (0)21 633 16 00Fax +41 (0)21 633 17 [email protected]

TESA FRANCE SAS4 rue Antoine LavoisierPôle Lavoisier – Bâtiment AF-54300 Moncel-lès-Lunéville Tél. +33 (0)3 83 76 83 76 Fax +33 (0)3 83 74 13 [email protected]

TESA Technology Deutschland GmbHNetzestraße 32 D-71638 LudwigsburgTel. +49 (0)7141 8747 0Fax +49 (0)7141 8747 88 [email protected]

TESA Technology UK Ltd.Metrology HouseHalesfield 13 Telford, Shrops. TF7 4PLTel. +44 1952 681 349Fax +44 1952 681 [email protected]

TESA Technology ITALIA s.r.l. Via Bizzozzero, 118IT-20032 Cormano (MI) Tel. +39 02 663 053 69Fax +39 02 663 090 [email protected]

TESA Technology IbéricaAv. de Vizcaya s/nApart. 202 ES-48260 ErmuaTel. +34 943 170 340Fax +34 943 172 [email protected]

TESA BeneluxVan Elderenlaan 1NL-5581 WJ Waalre

Tel. +31 (0)40 222 06 08Fax +31 (0)40 222 17 [email protected]

SWISS MADE

THE NEW FACE OF

TESA GROUP

www.tesagroup.com

High accuracy

has a new address

Today we proudly present our new web portal for the TESA Group. You’ll %nd the latest information about us, our new products and access to our product data base.

Have you ever wished for

a complete product database

covering all your metrology needs ?

We’ve created it for you.

We invite you to discover this new universe for yourself !

* TESA Group: TESA SA Renens and its af"liates, TPTS (TESA Precision Technology Suzhou), JMTC, CEJ Sweden

All rights reserved – 10012.079.1311 – Version 23