TERMS AND CONDITIONS - Punjabeproc.punjab.gov.pk/BiddingDocuments/15788_Tender Document.pdf ·...

1 The firm must be GST & NTN registered in case of exemption, proof should accompany thequotation.

2 Minimum validation period of bids will be 90 days.

3 Warranty condition should be distinctively and elaborately mentioned in the quotation for eachitem.

4 Quotations are to be submitted up to October 28, 2013 at 1:00 PM and tender will be opened at02:00 PM on the same day.

5Payments will be made through cross cheque after deduction of all type of taxes as per prevailingrates. After receipt satisfactory report of the Inspection Committee and acceptance of the items asper given specification.

6 Rates must be inclusive of all taxes to be payable by supplier which will be deducted at the timeof final payment.

7 The chairman purchase committee reserved the rights to accept or reject any part of the entiretendered without assigning any reason.

8Earnest Money (refundable) at least @ 2% of the full value of items must be attached with thebid in shape of CDR/Demand Draft/Pay Order/Banker’s Cheque in the name of DISTRICTMANAGER TEVTA RAWALPINDI.

9 Copy of Sales Tax / Income Tax registration must be attached with request, on companyletterhead, for issuance of Tender.

10 Tender would be rejected if the amount of CDR is less than 2% of the quoted price.

11 10% security would be deducted from the bill at the time of payment and the same will bereleased after warranty period.

12 Tenders must be submitted separately for each technology along with earnest money/call depositReceipt or otherwise tender will be rejected.

13 Brochure of the item to be quoted must be attached.14 Black listed firms will not be entertained.15 In case of any query or information contact on telephone No: 051-9290347-48

TERMS AND CONDITIONS

3. Wire Guage Standard (imported) 0-45 SWG 01 No

UK/ USA/ Japan/ Taiwan/ or Equivalent

10

4. Micrometer Digital 0-25 mm (Inter/.Ext.)


10

5. Knife Electrician Folding Type 4” Blade


10

Kelvin’s Double Bridge Portable:- Range 0.1 to 110 Ohm- Built-in Galvanometer with protectionPhase Angle Meter Portable.- Display 3 digits with polarity + (Lead) and – (Lag)- Voltage Range 10-400 V

- Current Range 0.5 – 20 APotential Transformer:Primary Rating 220/440/2200/3300 VSecondary Rlating 110 VLux Meter Digital:Range: 0-20000 luxMax/Data hold functionBacklit LCD displayPower Supply AC/DC Digital:Output AC Range: 0 to 220V, 500mAOutput DC Range: 0 to 220V, 10mAInput Voltage: 220/380V ACWith protection.Reheostat Air Core Resistance:-100W 2.503A-200W 2.5-3 A-32W 2.5-3 APotentiomete/Resistance Substitution Box:

Qty

10UK/ USA/ Japan/ Taiwan/ or Equivalent

GCT TAXILA

Remarks Total Cost with GST ITEMS Specification Unit

Rate

ELECTRICAL TECHNOLOGY

COMPARATIVE STATEMENT

BASIC LAB.NO.1 WIRING LAB

GST


31.

34

1

17.


Sr #

BASIC LAB.NO.228.

Total Cost without

Total Lab No.1

14. 5

22



5

11.

1



5

Qty Remarks Total Cost with GST ITEMS Specification Unit

Rate GSTSr #

Total Cost without

Low Range: 15 to 10,000 OhmsHigh Range9:17 PM 15,000 to 10,000,000ohms

Two 12-Step rotary switches allow selection of 24 values

37 Test and Fault detector UK/ USA/ Japan/ Taiwan/ or Equivalent

2

38 Bench Growler UK/ USA/ Japan/ Taiwan/ or Equivalent

4

AC Voltage Transducer:

Input Voltage9:23 PM 100V, 100/√3V, 110V, 110√3V, 230V, 400VAccuracy class: 0.2%Output: 0-5, 0-20mA,0-5, 0-10VAC Current TransducerInput Current: 5A or 1AAccuracy class: 0.2%Rated Frequency: 50 or 60 HzBurden : <0.5VAOutput: 0-5, 0-20mA, 0-5, 0-10V

42 Power Transducer Single Phase


6

43 Power Line Transducer 3-Phase


6

Frequency Transducer:Input Frequency Range : 45-55 Hz, 55-65 Hz, 45-65 Hz, 360-440 HzInput Voltage: 110V, 100/√3V, 110V, 110/√3V, 230V, 400V

Accuracy class: 0.2%

6

Equivalent


641

644

40 UK/ USA/ Japan/ Taiwan/ or Equivalent



Rate GSTSr #

Total Cost without

Multi-Range: 60-120-300-600mAScale: 120mm to 135mm with mirror under layAccuracy: 2.5%Ammeter AC/DC PortableMulti-Range: 60-120-300-600mA&1.2-3-6AScale: 120mm to 135mm with mirror under layAccuracy: 2.5%Ammeter AC/DC PortableMulti-Range: 60-120-300-600mA&1.2-3-6AScale: 120mm to 135mm with mirror under layAccuracy: 2.5%

66. Thermocouple Wire K type 1600oC


16

67. Bearing Puller ½” – 2.5” inner dia


8

69. Spring Balance 50 Kg UK/ USA/ Japan/ Taiwan/ or Equivalent

4

-

60. 5

POWER LAB.NO.3

59.

Total Basic Lab No.2

10UK/ USA/ Japan/ Taiwan/ or Equivalent


Equivalent


Rate GSTSr #

Total Cost without

3 Basic Electronic Trainer:To perform the following experiments:Ohm’s law, Series and parallel resistive circuits, Electricity units and symbols, DC current, switches and relays, Power supplies and measuring instruments, Kirchhoff’s law, Laws combination of resistances, Faraday’s Law, Self inductance of coil, Laws of combination of capacitors, Power factor measurements, Measurement of power phase sequence, Measurement of reactive power, Measurement of Power factor improvement, Thevenin’s theorem, Superimposition theorem, Rheostats and Potentiometers,


1

4 Basic Electronic Trainer:For performing following experiments:PN JunctionHalf and Full wave rectifiersDiode Characteristics, Voltage Doubler Zener Diode, Voltage Stabilization circuitsDiode Limiters, Clipping and Clamping CircuitsUse of UJT, SCR, Diac and TriacesNPN, PNP TransistorsUse of FET and MOSFET, J-FET,


1


Rate GSTSr #

Total Cost without

10 Galvanometer Portable:Current Sensitivity: 0.9 A/divVoltage Sensitivity: 540 V/divInternal/External resistance


10

22 Watt hour Meter Single phase Analog:Voltage: 220-240VCurrent: 10/40AFrequency: 50Hz

Pakistan/ China or Equivalent

3

35 Ammeter AC/DC Portable:Multi-Range: 3-7.5-15-30AScale: 120mm to 135mm with mirror under layAccuracy: 2.5%.


5

36 Ammeter AC/DC Portable:Multi-Range: 3-7.5-15-30AScale: 120mm to 135mm with mirror under layAccuracy: 2.5%.


5

47 Battery Charger:Output Voltage: 12VDC, 8AInput Voltage: 220VAC, 50Hz.


4

54 Syncroscope 96 x 96 UK/ USA/ Japan/ Taiwan/ or Equivalent

4

57 Potentiometer/Resistance Substitution Box:Low Range: 15 to 10,000 OhmsHigh Range: 15,000 to 10,000,000 OhmsTwo 12-Step rotary switches allow selection of 24 values.


4


Rate GSTSr #

Total Cost without

68 Spring Balance Capacity 50kg


4

69 AC Current Transducer:Input Current: 5A or 1AAccuracy class: 0.2%Rated Frequency: 50 or 60HzBurden: <0.5VAOutput: 0-5, 0-20mA, 0-5, 0-10V


5

70 AC Voltage Transducer:Input Voltage: 100V, 100/ 3V, 110V, 110/ 3V, 230V, 400VAccuracy class: 0.2%Output: 0-5, 0-20mA, 0-5, 0-10V


5

71 Power Line Transducer UK/ USA/ Japan/ Taiwan/ or Equivalent

5

72 Frequency Transducer:Input Frequency Range: 45 – 55Hz, 55 – 65Hz, 45 – 65Hz, 360 – 440HzInput Voltage: 100V, 100/ 3V, 110V, 110/ 3V, 230V, 400VAccuracy Class: 0.2%Burden: <0.5VAOutput measuring range: 0 – 200mA, 4 – 20mA, 0 – 10V


5

73 3-Phase Transducer 5kVA variable


2

74 Single phase Transducer 3kVA


2

75 Current Transformer (portable):

UK/ USA/ Japan/ Taiwan/ or

5


Rate GSTSr #

Total Cost without

77 Protection Relays (Analog / Digital):Study the operating characteristics of the following protection relays:Atrracted Armature type relay, Buchholz’s relay , Plunger type relay, Induction over current relay, Induction reverse power relay, Induction relay, Impedance relay, Reactance relay, Beam relay, Frequency relay, Static relays, Amplitude-comparator relay, Phase comparator relay, Over voltage, Under voltage relay, Static over-current relay, Static distance relay, Differentials protection relay (Current balance, Voltage balance), Photoelectric relay, Thermal relay.


2

80 Motor winding machine (local) manual

Pakistan/ China or Equivalent

2

- Total Power Lab No.3

1 BASIC MACHINE SHOP

1 SHAPING MACHINE (SHAPER)Stroke length = 400-450mmNo. of speeds = 2-8Strokes per mint = 20-130Vertical Travel of tool slide = 150mm or greaterTable automatic feed (5) = 0.2 to 2 mm/strokeMotor rating 3 ph/440v/50 Hz = 1.25-1.5 KWShaper Vice (Swivel Base) = 250-300 mm width of jaws. Note: - Along with all standard accessories machine handles, set of spanner. Ellen Key set and complete in all resprct.

Pak Made or Equivalent

2

3 PEDESTAL GRINDERBall bearing mounted spindle, suitable for tool grinding, protection glass/clear plastic eye shield with lamp.Grinding wheel = 250 x 30 x 25 mmSpindle speed = 2500-3000 rpmMotor rating 3 ph/440V/50 Hz = 600-750 WattQuick angle setting of = 30-90 degreeattachment Wheel dresser star = Standardtype / Diamond Complete in all respect.

Pak /UK/ USA or Equivalent

2

TOOL BITSMade of high speed steel cobalt alloy hardened and ground

/PkUK/ GERMANY or

Equivalent

1/2” x 1/2” x 8” or 12x12x100mm

50

3/8” x 3/8” x 8” or 10x10x200mm

50

1/4" x 1/4” x 8” or 6 x6 x63 mm

50

Total Rate with

GCT TAXILAMECHANICAL TECHNOLOGY

Total:


SpecificationITEMS QtySr #

6

Total Rate without

Unit Rate GST Remarks

Total Rate with SpecificationITEMS QtySr

#Total Rate

without Unit Rate GST Remarks

8 Plotter LaserJet A-0 Size Singapore/ UK or Equivlent

1

2 Portable Type Multirange VoltmeterAC/DC Voltage Range 6 0-120-300-600 VClass of accuracy 0.5 %Scale length 1 20 mm to 135 mmFrequency 4 0…60 … 400 HzMirror under-lay, Moving iron type with delicate hair like spring provided with conical edge and jewel. Along with standard Accessories and operational manual in English.

UK/JAPAN / GERMANY

/TAIWAN Or Equivalent

10

4 Portable Type Multirange Electrodynamic Power Meter (Singe Phase)Class of accuracy 0.5 %Scale length 1 20 mm to 135 mm Scale linear calibratedAC/DC current ranges 0.5-1-2.5-5 AAC/DC Voltage ranges 12-24-48-120-240-480 VMirror under-lay, Electrodynamic movement with delicate hair like spring provided with conical edge and jewel. Along with standard Accessories and

UK/JAPAN / GERMANY


5

Total:-

AUTO CAD LAB

Electricity and PLC LAB


#Total Rate


11 3pt & 4pt Starter 440V with complete fitting DC motor

UK/JAPAN / GERMANY


5

15 Phase Sequence failure & under voltage & over voltage control relay solid state

UK/JAPAN / GERMANY


5

16 Star Delta Starter 7.5hp-England20 amp-440 v. 3 phase

UK/JAPAN / GERMANY


5

17 Transformer 10 Kva RegulatorInput 3-phase 400/440 50 HzApproximate 3 ranges step up & 3 ranges step down

UK/JAPAN / GERMANY


5

18 Meggar 1000 Megohm 1000 V (Manual)

UK/JAPAN / GERMANY


10

19 Calibrated meter box UK/JAPAN / GERMANY


4

22 Industrial Electronics Trainer Kits25 pin connections sampling velocity 1-50000, digital signal simulation, no of channels 16 input range+ / - 16 volt maximum output 835 ks /sComplete in all respect and relevant hardware to conduct the all practicals. 1. Study and connections of PN diodes as rectifiers2. Connecting PN Diode as half-wave and full-wave3. Connecting PN Diode as bridge Rectifiers with filter4. Study of Power Supply

5. Connections and biasing

UK/JAPAN / GERMANY


1


#Total Rate


13PYROMETERS (Radiation Type)2500 ºC Optical Type

PAKISTAN/UK/ GERMANY Or

Equivalent1

15

CO2 MOLDING APPARATUSCO2 Gas Cylinder with Pressure Regulator Rubber hoses 8 meter, Spray Gun


Equivalent 1

16

ELECTRIC HAND GRINDER (PORTABLE) Suitable for 10 inch grinding wheel


Equivalent2

17Steel Wire Brush = 2 inch Good quality


Equivalent10

19

Molding Box 12″ x12″ x 4″ inchM. S plate thickness=6 mm with hand grip


Equivalent 16

20

Molding Box 18 x 18 x 6 inch Plate = 6mm with hand grip


Equivalent16

21 Slick 10 inch Mild Steel


Equivalent16

22 Gate Cutter S.S Sheet Swg -20


Equivalent16

23 Sand Lifter 10 inch


Equivalent16

24 Trovel 8”


Equivalent16

25 Shovel with wooden Handle


Equivalent16

30Foudry Riddles 10,12,16,18 mesh dia 18 inch set of 4 pcs


Equivalent16

31 Strike off BarsWooden, size 1x 2x 20 inch


Equivalent16

32Wooden Rammer 12 inchWith pien end and butt end dia 3 inch


Equivalent16

33

Sprue PinsAluminumTapper, Dia ½, ¾ inch length 8 inch


Equivalent32

Ladle CarrierFor carrying and poring from



#Total Rate


42Vent wire length 200 mm, dia 5mmWith sharp end and Eye end


Equivalent16

43Molding BoardDiar wood, 20X20X1 inch with supporting Ribs


Equivalent16

48 Leather Apron With 18″ length 36″


Equivalent26

49Safety ShoesSuitable and common size ‘Heavy leather’


Equivalent50

50 Leather slaves pairs


Equivalent50

-

1 Instruments BoxSpecial Compass Set


Equivalent2

2Tee Square(600 mm)Transparent


Equivalent2

3Set SquareTransparent medium size (300 mm)


Equivalent2

4TemplatesCircle Square, Hexagon, Triangle (03 each)


Equivalent2

5 French CurvesGood Quality, medium size


Equivalent2

6 Clutch Pencil (0. 5 mm)


Equivalent5

8 Sharpener Machine PAKISTAN/UK/ GERMANY Or

Equivalent5

9 Portable Drawing Board(3’x2’ with scale)


Equivalent5

-

A. GAS WELDING

Total:

DRAWING HALL - DRAFTING LAB

Total:

WELDING SHOP


#Total Rate


21

Gas Welding TableMade of Mild Steel angle Iron. 75x75x 6 Approximate height 900Firebricks top / MS Bars

PAKISTAN/ UK Or Equivalent

2

-

B. FORGING SHOP

1

Black Smith ViceForged steel with griping surfaces heat-treated tough facesJaws 125 mm Length with opening capacities from 80 to 100 mm and additional leg.


Equivalent2

FORGING HAMMERS.Sledge hammer with handle = 5 KG 5Cross peen hammer = 500 gramsWith handle

10Straight peen hammer = 500 gramswith handle

10

4

Hot Chisel Forged steel hardened impact resistant head.Length = 150 mmWidth = 20mm


Equivalent 10

5

Cold Chisel Set.Made of forged steel hardened ground cutting edge. Hexagonal shapes with handle.Width of cutting edge = 35 mm.


Equivalent10

7

Top and Bottom fullerHardened tool steel with 6 cm 6 cm size and top fuller with handle.


Equivalent5

8Top and Bottom Swages.Hardened tool steel 6 cm x 6 cm


Equivalent5

9AnvilHardened polished face50 Kg


Equivalent2

10

Forging / Heating chamberwith blower, Hood etc. Heating by Natural gas bower.


Equivalent 2

Total Gas Welding:

3


Equivalent


#Total Rate


10

Cut-off of MachineSuitable to cut M.S flat,pipe,Angle iron etc Down hand feed with clamping viceDisc wheel (0 x T x Bore) = 60x4x 5mmMotor rating watts = 1800 or1.8 KW 230/50 HzMotor speed rpm =


Equivalent

1

12Hand ShearManual Type with long handle, 300mm Blade Length


Equivalent1

- -

2

JIG SAW:-Stand model solid cast iron construction for working both timber and metal. Accurately machined table and can be tilted. Crank shaft housing totally enclosed and suitable for various saw blades.Table size = 250 x 250 to 300 x 300mm.Sawing height = 45-50 mm. (Soft timber) = 8-10 mm (Hard timber)Sawing depth = 500-600 mm.Sawing blade speed Stroke/mint= 600,850Motor sating

UK/JAPAN / GERMANY


1

6

COMBINE BELT AND DISC SANDER:-Suitable for sanding and polishing workTable length = 550-600 mm.Belt width and length = 200x200

UK/JAPAN / GERMANY


1

PEDESTAL GRINDERBall bearing mounted spindle, suitable for tool grinding, protection glass/clear plastic eye shield with

Total Welding:

WOOD WORK SHOP

Total:


#Total Rate


15

MITRE BOX SAW:-With frame saw, graduated scale, lockable at 45˚ and 90˚ angle, base plate laminated wood, equipped with rubber sheet.Table length = 450 mm.Blade length = 565 mm.Cutting width right angle =

UK/JAPAN / GERMANY


5

20

CIRCULAR PLANE:-Flexible adjustable sole for concave & convex surface iron fastened by means of cam lever locking device, knurled screw & lever for fine depth of cut and lateral adjustments. Width of cutter = 45 mm.

UK/JAPAN / GERMANY


10

22

ROUTER PLANE:-Two knobs for holding, vertical blade adjustment.Blade width = 10-12.Over all length =

UK/JAPAN / GERMANY


5

25

MORTISE CHISEL:-Hard plastic handle, Hard and ground steel.Width = 6, 8, 10 mm.Over all length with handle = 300 mm.Set of 3 pcs

UK/JAPAN / GERMANY


10

26

TURNING CHISEL:-Hard wood handle, hard steel cutting bladeWidth = 10, 14, 20, 30 mm. Length with handle = 400 mm.

UK/JAPAN / GERMANY


10

30

RUBBER MALLET:-Hard rubber mallet with wooden handle high class finish.Dimension = Dia 60 x Length 60 mm.

UK/JAPAN / GERMANY


10

BAR CLAMP:-Made from T-section, back stop is positioned by means a UK/JAPAN /


#Total Rate


40

TRAMMEL:-Polished steel flat rule with guide way, Graduated in mm / inches Adjustable hardened points.Length of beam =

UK/JAPAN / GERMANY


6

41

FOLDING RULE:-Made form anodized aluminium. Graduated on both sides.Length = 1 m.Width = 15 mm.

UK/JAPAN / GERMANY


5

45

SOLID CENTER AUGER BIT:-With combination shank for use with bit brace.Diameter = 6, 8, 10, 12 mm.Shank diameter = 6.5 mm.Flute length = 100, 100, 115, 115 mm.Over all length = 165, 165,

UK/JAPAN / GERMANY


5

46

CENTER BITS:-Round shank with flat contact surface.Diameter = 6, 18, 10, 12 mm.Shank diameter = 5, 6, 6, 7 mm.Overall length = 165, 165,

UK/JAPAN / GERMANY


5

-

2

HOOK RULE:-Stainless steel/chromium steel, tempered, hook fitted at zero end, fine quality.Size (mm) = 300.

UK/JAPAN / GERMANY

/TAIWAN Or Equivalent 12

3

FOLDING RULE:-Made of wood / Teflon Minimum number of folds = 4.Maximum number of folds = 12 Size (mm) = 600.

UK/JAPAN / GERMANY


Total:

METROLOGY LAB


#Total Rate


15

CAST IRON SURFACE PLATE:-Made of close grain cast iron high quality finish. Length x Width x Thickness (mm) =300x300x25

UK/JAPAN / GERMANY


16

GLASS SURFACE PLATE:-High quality finish. Length x Width x Thickness (mm)=300x300x25

UK/JAPAN / GERMANY


1

19

CUBES:-Made of stainless steel cast iron tool steel. Size (mm) = 50x50x50, 100x100x100.Tolerance (mm) = ±

UK/JAPAN / GERMANY


23

SPIRIT LEVEL:-Suitable for horizontal, vertical, inclined level checking.Size (mm) =

UK/JAPAN / GERMANY


10

25

ENGINEER’S PARALLEL:-Made of tool steel high quality finish. Size (LxWxT)(mm) =

UK/JAPAN / GERMANY


5

32

VERNIER MICROMETER:- Carbide tip anvil and spindle face, thermal insulation frame, wooden/ plastic box.Range (mm) = 0-25.

UK/JAPAN / GERMANY


33

PLUG MICROMETER (INTERCHANGE ABLE ANVIL TYPE):-Range (mm) = 12-16, 16-20, 20-25, 3 anvils = At 120 degree angle.

UK/JAPAN / GERMANY


34

PLUG MICROMETER (FIX ANVIL TYPE):-Range (mm) = 50-60.3 anvils = 120 degree angle.LC (mm) = 0.005.

UK/JAPAN / GERMANY


35

SCREW THREAD MICROMETER:-Carbide tipped face anvil & spindle, shape of anvil and

UK/JAPAN / GERMANY


5


#Total Rate


43

DIAL PROTRACTOR:-Stainless steel high finish clear graduation.Angle setting (degrees) = 0-180.Dial graduation (degrees) = 1/12.

UK/JAPAN / GERMANY


44

VERNIER BEVEL PROTACTOR:-Stainless steel chrome finish, with magnifying glass.Angle setting (degrees) = 0-180.Dial graduation (degrees) =

UK/JAPAN / GERMANY


45

SINE BAR:- Made of high grade steel chrome finish hardened and ground.Distance between rollers (mm) = 150.

UK/JAPAN / GERMANY


47

SURFACE GAUGE:-Adjustable rocker arm, double end scriber and fine adjusting screwBase size (LxWxT) (mm) = 90x50x30.Stainless steel spindle length (mm) =260.

UK/JAPAN / GERMANY


6

53

ELECTRONIC DIGITAL CALIPER:-Spindle and anvil faces carbide tip, zero setting, LCD display, power on/off, dual conversion mm/inch.Working range (mm) = 0 - 150.

UK/JAPAN / GERMANY


5

54

ELECTRICAL COMPARATOR:-High precision sensor, stain chrome finish, corrosion resistance, friction free spindle, made of stain less steel, hardened, with two limit contacts.

UK/JAPAN / GERMANY


1

55

MECHANICAL COMPARATOR:-Cable release, with probe, mechanism consist of lever, gear segment, friction free, with put backlash, hardened

UK/JAPAN / GERMANY


1


#Total Rate


28

SURFACE PLATE:-Made of cast iron, highly polished and flat surface.Width of plate (mm) = 600.Length of plate (mm) = 600

UK/JAPAN / GERMANY


40

TIN SNIP (CURVED):-Suitable for cutting 22 gauge sheet metal, hardened and ground blades, spring joint.Blade size (mm) = 50 or 100.

UK/JAPAN / GERMANY


41

ANVIL:-Made of cast steel hardened face and horn, square hardy hole.Weight (Kg) = 50.

UK/JAPAN / GERMANY


1

51

SCREW DRIVER SET:-With change bale screw drivers flat, phlips, stubby etc. made of chromium vanadium steel, magnetic blade standard size.

UK/JAPAN / GERMANY


55

BENDING ROLLERS (POWER OPERATED):-Gear wheel enclosed in steel safe guard, push button control, all rollers highly polished & ground, upper roller adjustableMaximum sheet thickness (mm) = 4Working length (mm) = upto 1500.

UK/JAPAN / GERMANY


1

56

FOOT SHEARStrong Cast and Fabricated BodyShearing width (mm) = 1000Shearing thickness (mm) =

UK/JAPAN / GERMANY


-

HYDRAULICS AND HYDRAULIC MACHINES

Total:


#Total Rate


Fluid Friction in Pipes with Hydraulic BenchWith VenturimeterThis unit consists of:i. Smooth bore pipes of various diameters (6mm, 10mm and 17mm)ii. An artificially roughened pipeiii. A 90o bendiv. A 90o elbowv. A 45o elbowvi. A 45o “Y”vii. A 90o “T”viii. A sudden enlargementix. A sudden contractionx. A gate valvexi. A globe valvexii. An in-line strainerxiii. A venturi made of Perspexxiv. An orifice meter made of Perspexxv. Pitot Static Tubexvi. Manometers (1m)

THAILAND/INDONESHIA/UK or

Equivalent

• Determination of critical Reynold’s numberHead loss measurements using U-tube manometer and mercury U-tube manometerWith all accessories and Instructional Manual COMPLETE AND COMPATABLE IN ALL RESPECTS, , OR EQUIVALENT OF BEST

2 Bernoulli’s Theorem Demonstration Apparatus

Sump tank 120 -170 Litre capacityVolumetric tank capacity 35-40 LitreCentrifugal pump 60-90 LitreWith Stop watch


Equivalent

1 -

1 - 1


#Total Rate


3 Orifice Discharge Apparatuswith all Instructional manual and all standard accessoriesExperimental Capabilities:• Determination of the contraction and velocity coefficient of different orifices• Calculation of the orifices discharge coefficientThis unit consists of:• A cylindrical acrylic tank which has an orifice fitted at the base• A traverse assembly is provided to allow a pitot tube to be positioned anywhere in the jet.• A wire is attached to the pitot tube which can traverse across the jet (To accurately measure the jet diameter and the vena contracta diameter in


Equivalent

1 -

4 Apparatus of “Energy Losses in Bends”The energy losses in bends and fittings designed for investigation of energy losses in pipe bends and fittings, including valves.Experimental Capabilities:• Measure the losses in the devices as related to flow rate• Calculate the loss coefficients as related to velocity head• Compare the pressure drop across each device.COMPLETE AND COMPATABLE IN ALL RESPECTS, , OR


Equivalent

1 -


#Total Rate


MULTI PUMP TEST RIGThe apparatus should be configure on a single bench unit and plug and play type with Built in Service Tank and all accessories.• Built in service tank made of clear acrylic• Close cycle operation• Experiments manual with CDThe apparatus should be comprised of the below mentioned pumps preinstalled and connection.Centrifugal Pump Apparatus• Horizontal single stage pump in clear Plexiglas impeller hosing end suction single volute type• Variable speed control using variable frequency drive• Variable head Control


Equivalent

Axial Pump Apparatus• Horizontal single stage pump in clear Plexiglas Impeller hosing• Variable speed control using variable frequency drive• Variable head Control• Inlet and outlet pressure monitoring gauges• Variable area or digital flow meter for pump discharge flow rate measurementReciprocating Pump Apparatus• Horizontal pump in clear Plexiglas pumping head showing all working parts clearly• Variable speed control using variable frequency drive• Variable head feature


Equivalent

- 5 1


#Total Rate


MULTI TURBINE TEST RIG

The apparatus should be configure on a single bench unit and plug and play type with Built in Service Tank and all accessories.• Close cycle operation• Experiments manual with CDThe apparatus should be comprised of the below mentioned turbines preinstalled with interchangeable DC Dynamometer to use as Generator for load the apparatus should have variable resistive load.

The Control unit should have digital display for speed, Torque & Load.

For inlet and outlet pressure Borden tube manometer


Equivalent

Transparent turbine construction for operation View for all the turbines

Pelton Turbine

• Number of buckets: 16~18• Nozzle area: variable – 162 mm2 when fully open• Radius of runner to jet impact position: > 56.6 mm• Maximum speed: approximately 1800 rpm• Speed at maximum efficiency (approximately 80%): approx 1200 rpm• Power: 500Watts

- 6 1


#Total Rate


Equipment set: (1 No)Training Package: Pneumatics Basic LevelThis training package includes all the components required for training in the fundamentals of pneumatic control technology. Components have the patented Quick Fix mounting system, pneumatic connections on the easily-accessible upper side of the components, and Quick Star fittings for plastic tubing PUN 4 x 0.75 mm with standard inside or outside diameters. All components are industrial quality.The package is supplied in a Systainer with suitable storage containers, which will also fit into Learnline drawers. Also included in the scope of delivery are adhesive symbols which can be used to clearly identify the storage Compressor: (1 No)Oil-lubricated, extremely quiet (45 dB (A) compressor. Ideally suited for use in classrooms. With pressure regulator and water separator.• Pressure: 800 kPa (8 bar) Pmax • Performance: 50 l/min • Reservoir capacity: 24 l • Compressed air outlet: ¼“ • Noise level: 45 dB (A)/1 m • Continuous operation: max. 50%.COMPLETE AND Compressor accessories: (1 No)Consisting of:


#Total Rate


Pneumatics Basic Level: Training course documents (1 No)Nineteen project-orientated exercises, increasing in complexity and suitable for equipment set are the ideal introduction to pneumatics. Real problem descriptions with positional sketch, concrete project tasks and detailed aids for professional implementation provide the ideal preparation for real-life industrial environment. A new feature in the latest edition is the separation of the documentation into a workbook and a book of exercises. Each worksheet in Software: (1 No)FluidSIM®4.2 Pneumatics, individual and multiple licenses FluidSIM® Pneumatics contains a circuit diagram generation tool, a high-performance simulation tool and an e-learning tutorial on the subject of pneumatics, electro pneumatics, digital technology and GRAFCET. COMPLETE AND COMPATABLE IN ALL RESPECTS, , OR EQUIVALENT OF BEST QUALITY.System requirements • PC with Windows 98/ME/NT/2000/XP/Vista/Windows 7 • At least Pentium II 500 MHz • At least 128 MB RAM • Sound card


#Total Rate


CD-ROM: (1 No)FluidSIM®4.2 Pneumatics –Student version Fluid SIM Pneumatics contains a circuit diagram generation tool, a high-performance simulation tool and an e-learning tutorial on the subject of pneumatics, electropneumatics, digital technology and GRAFCET.COMPLETE AND COMPATABLE IN ALL RESPECTS, , OR EQUIVALENT OF BEST QUALITY. System requirements • PC with Windows 98/ME/NT/2000/XP/Vista/Windows 7 • At least Pentium II 500 MHz • At least 128 MB RAM Differences between full and Limitations of student version: In comparison with the student version, the full version offers the following functions: • Simulation of complex circuits without limitation limiting the number of components.• Precise calculation of pressures, flow rates, speeds, cylinder forces, electrical currents and voltages • Display of calculated status variables at all connections or by installing measuring instruments • Status diagrams for graphical display of simulation values during


#Total Rate


CD-ROM:FluidSIM®4.2 Pneumatics –Student version Fluid SIM Pneumatics contains a circuit diagram generation tool, a high-performance simulation tool and an e-learning tutorial on the subject of pneumatics, electropneumatics, digital technology and GRAFCET.COMPLETE AND COMPATABLE IN ALL RESPECTS, , OR EQUIVALENT OF BEST QUALITY. System requirements • PC with Windows 98/ME/NT/2000/XP/Vista/Windows 7 • At least Pentium II 500 MHz • At least 128 MB RAM • Sound card • 4-speed CD-ROM drive COMPLETE AND COMPATABLE IN ALL Software: (1 No)Training software Fundamentals of pneumatics The interactive and multimedia training program covers the basics of pneumatic control systems. Content extracts: • Drive components • Power supply • Final control elements • Signaling elements • Control elements • Additional requirements Training time: approx. 12 hours E.g. Single license on CD-ROM: with network license


#Total Rate


Equipment set, (1 No)Extension kit to convert "Pneumatics, Basic Level" to "Electropneumatics, Basic Level"This extension kit, together with the equipment set "Pneumatics, Basic Level", provides all the components required for basic training in electropneumatic control technology. Components have the patented Quick-Fix system, pneumatic and electrical connections are located on the easily-accessible upper side of the components, Quick Star fittings for plastic hose PUN-4 x 0.75 with standard inside or outside diameters and 4 mm safety sockets or M8 industrial plug connectors. All components are of industrial quality. Supplied in a Systainer with suitable storage Connecting cable set, (1 No)Safety laboratory cables, 98 units, red and blue Complete set, consisting of 98 safety laboratory cables with 4 mm safety connectors in the colors red and blue: • 10x red 50 mm • 10x blue 50 mm • 26x red 300 mm • 11x blue 300 mm • 21x red 500 mm • 12x blue 500 mm • 3x red 1000 mm • 3x blue 1000 mm • 1x red 1500 mm • 1x blue 1500 mmCOMPLETE AND


#Total Rate


Teachware, (1 No)Electropneumatics Basic Level: Training course documents Twelve project-orientated exercises, increasing in complexity and suitable for equipment set, are the ideal introduction to electropneumatics. Real problem descriptions with positional sketch, concrete project tasks and detailed aids for professional implementation provide the ideal preparation for a real-life industrial environment. A new feature in the latest edition is the separation of the documentation into a workbook and a book of exercises. Each worksheet in the book of exercises has a sample solution in the workbook. Workbook• Sample solutionsSoftware, (1 No)Training software Fundamentals of electropneumaticsThe interactive and multimedia training program covers the basics of electropneumatic control systems. This knowledge will be implemented in the project section using various practical projects. The participants can refer back to the project-specific information


#Total Rate


Content extracts:• Advantages and drawbacks of electropneumatics• Fundamentals of electricity• Components of electropneumatics• Electromechanically actuated valves • Relays and contactors• Basic circuits• Direct and indirect actuation• Basic logic functions• Various sequence controllers• Standards-compliant electrical circuit diagrams• Electrical and pneumatic circuit diagrams• Safety and protective measures in electropneumatic systems• Maintenance and servicing including fault location and elimination• Standards-compliant documentation of electropneumatic circuitsMagnet Symbol Set, (1 No)For step-by-step development of circuit diagrams. The symbols adhere to a metal-backed board. Connections and designations are marked with chalk. The symbol sets are stored in a Systainer.Design: Electrical engineeringCOMPLETE AND Video film, (1 No)DVD Electropneumatics and Electrohydraulics, Basic LevelThe main emphasis of this DVD is on electrical control systems. In addition to an


#Total Rate


Equipment set, (1 No)Training Package: Electro pneumatics, Advanced LevelThis training package contains all the components required for advanced training in electro pneumatic control engineering, It builds on Training Package Components have the patented Quick-Fix system, pneumatic and electrical connections are located on the easily-accessible upper side of the components, Quick Star fittings for plastic hose PUN-4 x 0.75 with standard inside or outside diameters and 4 mm safety sockets. All components are of industrial quality. Supplied in a Systainer with suitable storage containers, also suitable for Learn line storage drawers. The scope of delivery also includes Teachware, (1 No)Electropneumatics, advanced level: Training course documents As a continuation of the basic level for electropneumatics, the advanced level includes twelve additional, challenging tasks which are suitable for the equipment set. The documents are targeted at experienced pneumatics technicians. New features of this revised and updated edition include revised exercise sheets for practical use during instruction. The workbook contains a sample


#Total Rate


9 Dead Weight Master Gauge CalibratorThis unit consists of:• A precision machined and cylinder assembly mounted on leveling screws• A Bourdon gauge for calibration• The weights (Added to the upper end of the piston road which is rotated to minimum friction effects) the gauge is

1 -

10 Hydraulic Trainer (Transparent Type Components)Consisting of following items

1 -

• Transparent model table Size: 1500(L) x 790(W) x 870(H)mmCabinet (Locking type)430 (L) x 700 (W) x 680(H)mm• Transparent model power unitCapacity: 7.5 lHydraulic oil: ISO VG32Motor: AC220V, 60HzMax Pressure: 10kg/cm2• Hydraulic transparent model clampUsed for fixing parts on the • Pressure relief valve, directly controlledLength: 75mmWidth: 60mm2 portAdjusting lever operated• Pressure relief valve, cushion, directly controlledLength: 75mmWidth: 60mm2 portAdjusting lever operated


#Total Rate


• Orifice valve Length: 75mmWidth: 60mm2 porthand lever operated• One way flow control valveLength: 75mmWidth: 60mm2 portAdjusting lever operatedSpring check type• Pressure compensative flow control valveLength: 75mmWidth: 60mm3 portAdjusting lever operatedSpring spool type Inside pressure measurement • Hydraulic check valveLength: 75mmWidth: 60mm2 portSpring check type• Hydraulic check valve, pilot actuatedLength: 75mmWidth: 60mm3 port• 2/2 way valveLength: 75mmWidth: 60mm2 portHand lever operated• 3/2 way valve Length: 75mmWidth: 60mm3 portHand lever operated• 4/2 way valveLength: 80mmWidth: 60mm4 port


#Total Rate


• 5/2 way valve, pilot actuatedLength: 95mmWidth: 60mm5 portPush lever operated • Shut-off, circuitLength: 95mmWidth: 60mm4 portAdjusting lever operated Spring check type • Pressure relief valve, pilot actuatedLength: 80mmWidth: 60mm4 portAdjusting lever operated • Pressure relief valve, externally actuatedLength: 80mmWidth: 60mm4 portAdjusting lever operated Spring spool type • Double check valve, pilot actuatedLength: 95mmWidth: 60mm4 port• Flow dividing valve Length: 75mmWidth: 60mm4 portAdjusting lever operated Spring spool type • 3 way pressure flow control valveLength: 95mmWidth: 60mm3 portAdjusting lever operated • Rectifier circuit Length: 90mm


#Total Rate


• External gear motor Length: 90mmWidth: 90mm2 port• Linear motorLength: 90mmWidth: 90mm2 port• Rotary vane motorLength: 90mmWidth: 90mm2 port• Axial piston motor Length: 110mmWidth: 60mm4 port• Pressure gaugeLength: 50mmWidth: 50mm1 port• Pressure switchLength: 90mmWidth: 90mm1 port4mm socket incAdjusting lever operated • Piston accumulatorLength: 110mmWidth: 60mm2 port• Piston accumulatorLength: 110mmWidth: 60mm2 port• Diaphragm accumulatorLength: 80mmWidth: 60mm2 port• Bladder accumulatorLength: 120mmWidth: 60mm2 port• 3/2 way solenoid valve


#Total Rate


• 4/2 way double solenoid valveLength: 100mmWidth: 60mm4 port4mm socket inc• 4/3 way solenoid valve(PT connected)Length: 100mmWidth: 60mm4 port4mm socket inc• 4/3 solenoid valve(ABT connected)Length: 100mmWidth: 60mm4 port4mm socket inc• 4/3 way solenoid valve(all block type)Length: 100mmWidth: 60mm4 port4mm socket inc• T connector Length: 75mmWidth: 60mm3 port• + connectorLength: 75mmWidth: 60mm4 port• Transparent model hoseLength: 1mInner diameter: 4mmMax pressure 20kg f/cm3• Hydraulic transparent model workbookCOMPLETE AND COMPATABLE IN ALL RESPECTS, , OR

9 Dead Weight Master Gauge Calibrator


Equivalent

1


#Total Rate


• Transparent model table Size: 1500(L) x 790(W) x 870(H)mmCabinet (Locking type)430 (L) x 700 (W) x 680(H)mm• Transparent model power unitCapacity: 7.5 lHydraulic oil: ISO VG32Motor: AC220V, 60HzMax Pressure: 10kg/cm2• Hydraulic transparent model clampUsed for fixing parts on the • Pressure relief valve, directly controlledLength: 75mmWidth: 60mm2 portAdjusting lever operated• Pressure relief valve, cushion, directly controlledLength: 75mmWidth: 60mm2 portAdjusting lever operated• Pressure reducing valveLength: 75mmWidth: 60mm3 portSpring adjustableAdjusting lever operated• 2 way flow control valve Length: 75mmWidth: 60mm2 portAdjusting lever operated• Orifice valve Length: 75mmWidth: 60mm2 porthand lever operated


#Total Rate


• Hydraulic check valveLength: 75mmWidth: 60mm2 portSpring check type• Hydraulic check valve, pilot actuatedLength: 75mmWidth: 60mm3 port• 2/2 way valveLength: 75mmWidth: 60mm2 portHand lever operated• 3/2 way valve Length: 75mmWidth: 60mm3 portHand lever operated• 4/2 way valveLength: 80mmWidth: 60mm4 portHand lever operated• 4/3 way valveLength: 90mmWidth: 60mm4 portHand lever operated• Hydraulic double acting cylinder Length: 75mmWidth: 60mm2 portPiston dia: 15mm• 5/2 way valve, pilot actuatedLength: 95mmWidth: 60mm5 portPush lever operated • Shut-off, circuitLength: 95mm


#Total Rate


• Pressure relief valve, externally actuatedLength: 80mmWidth: 60mm4 portAdjusting lever operated Spring spool type • Double check valve, pilot actuatedLength: 95mmWidth: 60mm4 port• Flow dividing valve Length: 75mmWidth: 60mm4 portAdjusting lever operated Spring spool type • 3 way pressure flow control valveLength: 95mmWidth: 60mm3 portAdjusting lever operated • Rectifier circuit Length: 90mmWidth: 90mm4 portSpring check type 4 check valves • Vane motorLength: 90mmWidth: 90mm2 port• Internal gear motor Length: 90mmWidth: 90mm2 port• External gear motor Length: 90mmWidth: 90mm2 port• Linear motor


#Total Rate


• Pressure switchLength: 90mmWidth: 90mm1 port4mm socket incAdjusting lever operated • Piston accumulatorLength: 110mmWidth: 60mm2 port• Piston accumulatorLength: 110mmWidth: 60mm2 port• Diaphragm accumulatorLength: 80mmWidth: 60mm2 port• Bladder accumulatorLength: 120mmWidth: 60mm2 port• 3/2 way solenoid valveLength: 100mmWidth: 60mm3 port4mm socket inc.Power DC 24V• 4/2 way single solenoid valveLength: 100mmWidth: 60mm4 port4mm socket inc• 4/2 way double solenoid valveLength: 100mmWidth: 60mm4 port4mm socket inc• 4/3 way solenoid valve(PT connected)Length: 100mm


#Total Rate


• T connector Length: 75mmWidth: 60mm3 port• + connectorLength: 75mmWidth: 60mm4 port• Transparent model hoseLength: 1mInner diameter: 4mmMax pressure 20kg f/cm3• Hydraulic transparent model workbookCOMPLETE AND COMPATABLE IN ALL RESPECTS, , OR

11 Maintenance and Repair Tool kit (1 each)Ball Peen hammer 2lbsFlat screw driver set 6”,8”,10”,12Philip screw driver setSteel measuring tape 3mmChisel flat 6”8”10”Steel measuring tape 3mChisel flat 6”8”10”Ellen key set 1.5mm-10mm(set of 9PCS)Steel rule 150mm-300mmVernier caliper 0-300mm(digital)Outside micrometer 0-25mmCentre punch Set of 4 PCSDrift punch SetFlat file second cut 8”10”Round File diameter (6mm,10mm,12mm)Try square 150mmGreece gun metal body Bearing puller 200m,250mm(3legs)Hand hacksaw 12”( Adjustable frame)


Equivalent

1 -


#Total Rate


2 Dead Weight Gauge Tester with Pressure gaugeSpecifications

SPECIFICATION

CYLINDER - BRASS. PISTON - High quality stainless steel , cross – sectional area 333 mm2

Pressure gauge-bourdon tube type with scale graduated 0-200 KN /m2 in 10 KN /m2 Intervals (also available in imperial units ). Weights 4 each 1, 0 kg 2 each 0,5 kg 1 each 0,2 kg Materials and finishes have been chosen carefully to give the fullest Protection against corrosion

UK/JAPAN / GERMANY /

TAIWAN/ INDONESHIA Or

Equivalent

1

Steam Turbine Power SystemExperimental opportunities:Energy relationships and the First Law ofThermodynamics.Cycle analysis and the Second Law ofThermodynamics.Control volume analysis.Entropy analysis.Isentropic analysis and the study of turbine/nozzle efficiency.Heat transfer analysis and the study of boilerefficiency.Combustion processes.



Equivalent

13


#Total Rate


A steam electric power plant designed for engineering education. Consisting of a fossil-fueled boiler, steam turbine and condenser tower mounted on a rigid, mobile frame. Boiler of a tube-type, flame through design with access doors to view the inner workings. Steam rate adjustable through a steam admission valve, regulating turbine speed and power output. Axial flow turbine used to drive an alternating current generator. Generator output to be rectified allowing the output of direct current. Generator output capable of delivering 15Volts at 1 Amp to infinitely adjustable 15 Watt load. Unit to include analog boiler pressure gauge, generator voltage and generator current meters. To be supplied with a USB based digital data acquisition system



Equivalent

4 Thermocouples(Different Ranges and types) 0-1500 oC



Equivalent

1

5 Sectioned model of Simple Vertical Boiler



Equivalent

1

6 Sectioned model of COCHRAN (Multi tubular boiler)



Equivalent

1

7 Sectioned model of Marine Boiler (Scotch types).



Equivalent

1

8 Sectioned model of UK/JAPAN / 1


#Total Rate


11 Training Steam Boiler (100Kg/h)

SpecificationBoiler unit:- Type : Vertical, water tube.- Capacity : Up to 100 kg/hr steam.: Up to 10 kg/cm2 pressure.- Boiler instrument and safety devices include:: Pressure gauge and switch.: Temperature gauge.: Safety valve.: Level gauge and switch.: Safety alarm.- Boiler accessories include:: Steam separator.



Equivalent

1

Burner:European Made Force Draft with Built in Atomizer & PumpType : On – Off, automaticFuel : Diesel oil, Kerosene or any other Light Oil



Equivalent

Feed water system includes:Resin filter for public water.Water Softner Filtration with activated Carbon Pressure gauge.Soft water tank.Feed water pump.Water meter for steam rate monitoring.



Equivalent

Fuel system includes:- Fuel tank- Fuel flow meter

COMPLETE AND COMPATABLE IN ALL RESPECTS (ALONGWITH INSTALLATION) , OR



Equivalent

12 Working model of steam Turbine


TAIWAN/

1


#Total Rate


Instrumentation

Digital : high speed data acquisition system Data acquisition software with configurable data output windows laptop computer for on – screen data display single cable PC connection Multiple analog INMultiple digital IN/OUT 4 Frequency / Pulse IN

Sensors ( Preinstalled and calibrated )

Boiler temperature and pressure Turbine inlet temperature and pressure Turbine exit temperature and pressure Turbine RPM Fuel flow



Equivalent

Operating conditions / limitations

Boiler : pressure 120 psi ( 827 kpa ) temperature 482 degree F (250 degree C)

Generator : 15.0 volts , 1.0 Amp ( total load of 15.0 watts )

Operating requirements

Typical laboratory or classroom setting Power : 220V Single Phase Fuel : liquid petroleum

COMPLETE AND



Equivalent


#Total Rate


13 Gas Turbine Power SystemExperimental opportunities Experimental and research opportunities include scientific, engineering, thermodynamic and environmental investigations. With a wide array ofsensors, experiments relating to secondary education physics and chemistry through graduate level fuels and combustion research are readilyperformed. Standard courses in engineering thermodynamics and fluid mechanics benefit from textbook direct examples conducted andmeasured in real time. The limitations of theoretical models and the variability of experimental technique can be experienced first hand. Inaddition to academics, the



Equivalent

1

With measured values of compressor inlet temperature and pressure, turbine inlet temperature and pressure, turbine exit temperature and pressure, fuel flow and inlet and exit areas, possible calculations include:• Compressor Analysis - compressor pressure ratio, power required, rotational speed and compressor efficiency• Turbine Analysis - work and power developed, expansion ratio and turbine efficiency• Cycle / Brayton Type Analysis - mass flow rate,



Equivalent


#Total Rate


A complete gas-turbine power system to consist of an engine designed and manufactured for engineering education.Engine must utilize a centrifugal flow compressor, reverse flow annular combustor and an axial flow turbine stage.Engine to be of current manufacture and consisting of all new components.All engine components either vacuum investment cast or precision CNC machined.All high-heat components manufactured from 17-4 ph stainless steel, Inconel® 718or CMR 247 Super Alloy.Traceable and verifiable material to be used throughout engine.All elements comprising the system to be contained in a rigid steel chassis mounted on rolling castors. All system metal surfaces to



Equivalent

Operator panel to consist of digital TIT, EGT, and RPM indicators, analog oil pressure, engine pressure ratio, fuel pressure and air pressure gauges, keyed master, green start red stop and T-handled power control lever.System to be equipped with calibrated transducers and thermocouples capable of measuring compressor inlet, compressor exit, turbine stage inlet, turbine stage exit and thrust nozzle exit temperature and pressures, fuel flow, thrust and engine compressor



Equivalent


#Total Rate


14 Reciprocating air compressor Study BenchSpecifications and features • Measurement of intake and delivery pressure• Airflow rate• compressor speed• Temperatures• Determination of the volumetric and isothermal efficiency• Compressor, 1 cylinder, single-stage• Power consumption: 750W• nominal speed: 980rpm• operating pressure: 8bar• max. pressure: 10bar• intake capacity: 150L/min at 8bar• Safety valve blow off



Equivalent

1

Measuring ranges - temperature: 2x 0...200°C- pressure: -1...1bar / 0...16bar- differential pressure: 0...10mbar- 2 manometers: -1...4bar / 0...16bar

COMPLETE AND



Equivalent

15 Rotary air compressorFeatures

Screw air compressor with air receiver or portable screw air compressor with air tank (2KW~5KW)SpecificationsPressure : 5Bar ~ 10 BarTank: 200 LitersWith Education training



Equivalent

1

16 Ignition point Testing equipmentBattery Ignition system for Single spark plug and multi



Equivalent

1


#Total Rate


19 AC System Trainer (Heating and Cooling)SpecificationsCompressor unit with condenser 3-Phase AC motor, 3 HP, 380V, 50HzAutomatic regulating valve for cooling water calibrating tank to measure the water condensed at dew point conditions venturi meter to control the return air flow double damperCentral fan with variable speed motor variable heating coil, 2kW+1kW humidification station2 stage direct cooling coilReheating, 1kWRegulating system for conditioned air 6 hygrometers for relative humidity control6 dial thermometers for air controlPressure switches, solenoid valves, expansion valves,



Equivalent

1

21 Working models of Petrol EngineA= 2 Stroke Petrol EngineB= 4 Stroke Petrol EngineSpecifications Single Cylinder 2 stroke and 4 strokes with important parts including valve control, Ignition system and Carburetor, sectioned model made of original parts.

COMPLETE AND



Equivalent

1

22 Working models of Diesel EngineA= 2 Stroke Diesel EngineB= 4 Stroke Diesel EngineSpecifications Single Cylinder 2 stroke and 4



Equivalent

1


#Total Rate


23 Maintenance and Repair Tool kitBall Peen hammer 2lbsFlat screw driver set 6”,8”,10”,12Philip screw driver setSteel measuring tape 3mChisel flat 6”8”10”Chisel flat 6”8”10”Ellen key set 1.5mm-10mm(set of 9PCS)Steel rule 150mm-300mmVernier caliper 0-300mm(digital)Outside micrometer 0-25mmCentre punch Set of 4 PCSDrift punch SetFlat file second cut 8”10”Round File diameter (6mm,10mm,12mm)Try square 150mmGreece gun metal body Bearing puller 200m,250mm(3legs)Hand hacksaw 12”( Adjustable frame)



Equivalent

1

Twist drill set5mm,8mm,10mm,12mm(02,each)Tap set with handle 5mm,6mm,8mm,10mm( 01,each)Fix die set with handle 6mm,8mm,10mm,12mmTap extractor 6-12mmOil can ½ literEasy out 5-12 MMWith tool box made of M.S.



Equivalent

- Total:

MATERIALS TESTING AND HEAT TREATMENT (MECH 362)


#Total Rate


1 UNIVERSAL HARDNESS TESTING MACHINE FOR BRINELL, ROCKWELL AND VICKERS HARDNESS TESTSpecificationMeasuring range: 5-400HBS, 25-85HRA, 25-100HRB, 20-70HRC, 210-1000HVTest load: 294.2, 306.5, 588.4, 612.9, 980.7, 1471, 1839N (30, 31.25, 60, 62.5, 100, 150, 187.5kgf)Max. height of tester piece: 150-210mmPower supply: 220V or 110V AC, 50/60HzMain AccessoriesLarge flat anvil: 1 pcSmall flat anvil: 1 pcV-notch anvil: 1 pcDiamond cone penetrator: 1 pcDiamond pyramid penetrator: 1 pcs



Equivalent

1

4 Universal Testing Machine(Computerized, 50-100KN capacity)Specification• Max Test load =100KN• Load range =0-20KN ,0-50 KN ,0-100 KN• Accessories;• Grip for round specimen 0-20mm• Grip for flat specimen 0-15mm• Instructional manual• Fixture for Bend, Shear, compression and tensile test• Extensometer• Tool kit • Graphical unit accessories



Equivalent

1


#Total Rate


5 Readout Microscope:Suitable to measure the diameter of indentation in Brinell Hardness testing, determine the width and length of scale mark, slit, key slot and dent. Check metal surface quality, density of fiber and field specimens, etc.Specification:Magnification: 40XEffective field view range (mm): Ø3Dimensions (mm): 70 x 50 x 187



Equivalent

1

6 Torsion Testing machine Along with all standard and optional accessoriesSpecificationMeasuring range = 5-500 N-mMeasuring range of scale = 0-50 N-M 0-100 N-m 0-200 N-m 0-500 N-mDistance of between grips = 0-600 mmDiameter of specimen =5-18mm

COMPLETE AND



Equivalent

1

9 Specimen Cutoff MachineWith all Standard accessories and attachmentsSpecification• Bench mounted cut off machine• Safety switch to hood• Two quick claiming vices with mountings for horizontal and vertical



Equivalent

1


#Total Rate


10 Magnetic particle testing equipment

Machine Specifications• Coil 16" Diameter, 7500 ampere turn• Power Supply Output 3000 amp AC• Electrical requirements 230 V 1ph 50AAccessories:• Central Conductors• UV Glasses• Work Rest Extension KitCOMPLETE AND



Equivalent

1

11 Heat treatment FurnaceWith Complete electric control panel and fittingsTemperature range up to 1500’C

COMPLETE AND COMPATABLE IN ALL



Equivalent

1

12 Specimen Polishing MachineWith all types necessary polishing clothsSpecification• Double interchangeable 200/250mm diameter plates• Single motor with drive belt variable speed 20 to 600 rpm• 230V single phase• 2 Pre select speeds 150 and 300 rpm• 2 rotation direction• Digital display of speed• Touch sensitive controls• Water flow controlled by electromagnetic valve• Multi-jet water spray systemCOMPLETE AND COMPATABLE IN ALL



Equivalent

1

15 Metallurgical Microscope:


TAIWAN/

1


#Total Rate


16 ThermocoupleType k temp range 0-1200cDia. 21.7mm,with digital temp controllerCOMPLETE AND COMPATABLE IN ALL



Equivalent

1

17 Maintenance and Repair Tool kitBall Peen hammer 2lbsFlat screw driver set 6”,8”,10”,12Philip screw driver setChisel flat 6”8”10”Steel measuring tape 3mChisel flat 6”8”10”Ellen key set 1.5mm-10mm(set of 9PCS)Steel rule 150mm-300mmVernier caliper 0-300mm(digital)Outside micrometer 0-25mmCentre punch Set of 4 PCSDrift punch SetFlat file second cut 8”10”Round File diameter (6mm,10mm,12mm)Try square 150mmGreece gun metal body Bearing puller 200m,250mm(3legs)



Equivalent

1

Open ended spanner 4mm-24mmElectric hand drill machine( 12mm)Twist drill set5mm,8mm,10mm,12mm(02,each)Tap set with handle 5mm,6mm,8mm,10mm( 01,each)Fix die set with handle 6mm,8mm,10mm,12mmTap extractor 6-12mmOil can ½ literEasy out 5-12 mm



Equivalent


#Total Rate


2 Universal milling machineSpecificationSuitable to cut spur, helical and bevel gears, push button control, separate automatic feed electric motor, coolant supply attachments and chip trayTable size (mm).= 1300x305 to 1300x350.Width of t slot (mm) = 18.Table longitudinal travel (mm) = 600-650.Table cross travel (mm) = 300-400.Table vertical travel (mm) = 455-600.No of spindle speeds = 16.Speed range (rpm) = 40- 3000.No of feeds = 12.Feed rate longitudinal, cross, vertical (mm) = 10-900.Fast longitudinal travel (m/mint) = 3.Fast vertical travel (m/mint) = 1.5.

Pak Made/ UK or Equivalent

4

4 Pedestal tool grinderWheel size = 250x25x25Motor 440v, 0Hz, 3Ph = 01 HPGrinding wheels Al2O3 Number 46 and 60 fitted with machine ,Safety guard, Eye Shield, Tool rest, Grease gun, Wheel dresser . Complete in all respect.



2


#Total Rate


6 Power hacksaw SpecificationHydraulic Power Hacksaw, variable cutting pressure, quick return of frame, cooling pump.Capacity Ø = 180-225 mmCapacity◊ = 230 x 230 mmMiter 450 = 190mmStrokes/mint = 40-160Blade size = 450 x 32 x 1.6mmMotor rating 3 ph 1440v/50 Hz. = 0.75-1.5 KWAdjustable material stand = 450-650mmWidth of stand = 350mmSeparate motor operated 440v, 3Ph, 50Hz 2.5 to 3 Kw. coolant supply attachment motor operated, Complete in all respect and standard accessories.


1

7 Surface grinding machine SpecificationFor grinding accurate jobs, accuracy 0.001mm, digital read out, workstation light, coolant supply attachment, work table hydraulic control.Table clamping surface (mm) = 550x300 to 600x300.Table longitudinal travel (mm) = 550 to 600Table cross travel (mm) = 300 to 350.Cross feed infinitely variable (m/stroke) = 0-20Grinding wheel size (mm) = 250x32x76.Motor power 3Ph = 3kw.With all standard accessories, tool kit, tool cabinet,


1


#Total Rate


8 Universal tool & cutter grinding machine SpecificationSuitable to grind all types of tool and cutters.Clamping area of table (mm) =820x 140.Longitudinal table travel (mm) =450.Lateral table travel (mm) = 225.Distance between centers (mm) = 600-650Height of center (mm) =125-130Spindle speed (rpm) =2800- 5600.Motor power 3ph = 1 kw.Table angle setting (degrees) =±450.


1

Attachments Face milling cutter grinding attachment (mm) = 450.Radius grinding attachment (mm) = 0-25.Cylindrical grinding attachment (mm) = 250.Internal grinding attachment (mm) =12-50.Indexing attachment = 01Extended grinding wheel spindle (mm) = 75.Universal vice (mm) = 100x25x75.Drill point grinding attachment (mm) = 3-25.Lathe and planer tool grinding attachment (mm) =10-38.Set of spring collets (mm) = 6, 8, 10, 12 ,16, 20.


#Total Rate


Accessories Work head = 1.Left hand tail stock = 1.Right hand tail stock = 1.Diamond wheel dresser = 1.Setoff wheel guards = 1.Universal tooth rest = 1.Center height gauge = 1.Collect wrench = 1.Ejector rod = 1T- wrench = 1.Pin wrench = 1.Grinding wheel sleeves = 5.Set of grinding wheels different shapes = 7.Spindle extension 100 mm =1.Belt for spindle drive = 1.Suitable tool cabinet = 1.Instruction / operation manual, complete in all respect.

COMPLETE AND COMPATABLE IN ALL 9 Vertical differential type Hobbing machine SpecificationVertical differential type machine capable to cut spur gears, helical gears and worm gears, heaving even, odd, prime number of teeth. Built in coolant and lubrication pump.Maximum module for gears (mm) = 6.Maximum diameter of gear hob wit out outer support (mm) = 400-500.Maximum diameter of helical gears hobbed (mm) = 370.Hob diameter (mm) = 120.Hob arbor diameter (mm) = 22, 27, 32.


1


#Total Rate


11 UNIVERSAL DIVIDING HEAD Suitable for direct angular plain and differential indexing, helical milling operation etc.Center height (mm) = 130.Direct indexing plates = 3.Plane indexing plates = 3.Foot stock = 1.Set of change gears = 12 gears.


4

12 ROTARY TABLE Suitable for angular indexing in degrees and mints.Gear ratio = 1:60.Rotary table diameter (mm) = 300.

Combatable with universal


2

13 VERTICAL HEAD Suitable to be mounted on milling machine spindle .Angular setting (degrees) = 45.Spindle taper = ISO 40Collet adaptor and draw in bolt = 1 set.Set of spring collets for straight shank end mill (mm)


4

14 SWIVEL BASE VICE Hardened and ground jaws with vice handle.Width of jaws (mm) = 210.Height of jaws (mm) = 63.Jaws opening minimum (mm) =160.Index swivel base = ± 360 degree.


4

15 MILLING ARBORSMade of alloy steel, spacing rings hardened and ground, suitable to fit spindle nose .


4


#Total Rate


18 RADIUS NOSE END MILL(Best Quality) Made of cobalt alloy HSS, hardened and ground cutting teeth.Nose radius (mm) = 6Cutter diameter (mm) = 12.Combatable with universal


4

19 RADIUS NOSE END MILL(Best Quality) Made of cobalt alloy HSS, hardened and ground cutting teeth.


5

20 CORNER ROUNDING END MILL(Best Quality) Made of cobalt alloy HSS, hardened and ground cutting teeth.Nose radius (mm) = 6,.Shank diameter (mm) =20.Combatable with universal


5

21 WOOD RUFF KEY SEAT CUTTER(Best Quality) Made of cobalt alloy HSS, hardened and ground cutting teeth.Key dimension (mm) = 6x32.Cutter diameter (mm) = 32.5.Cutter width (mm) = 6.Shank diameter (mm) = 18.Combatable with universal


2

22 T-SLOT CUTTER(Best Quality) Made of cobalt alloy HSS, hardened and ground cutting teeth, right handed with under cut staggered teeth.Cutter diameter (mm) = 31.2.Cutter width (mm) = 12.6.Over all length (mm) = 100.Shank diameter (mm) =18.


5

23 DOVE TAIL CUTTER(Best Quality)


2


#Total Rate


24 SINGLE ANGLE MILLING CUTTER(Best Quality) Made of cobalt alloy HSS, hardened and ground cutting teeth.Angle of cutting (degrees) = 45Diameter (mm) = 60Width (mm) = 12,


2

25 SHELL END MILLS(Best Quality) Made of cobalt alloy HSS, hardened and ground cutting teeth.


2

26 CONCAVE MILLING CUTTER(Best Quality) Made of cobalt alloy HSS, hardened and ground cutting teeth.Radius (mm) = 2.5,.Diameter (mm) = 63, Width (mm) = 10, Bore diameter (mm) = 22,.Combatable with universal


2

27 CONVEX MILLING CUTTER(Best Quality) Made of cobalt alloy HSS, hardened and ground cutting teeth.Radius (mm) = 5, Diameter (mm) = 63, Width (mm) = 10, Bore diameter (mm) = 22, Combatable with universal


2

28 SIDE AND FACE MILLING CUTTER(Best Quality) Made of cobalt alloy HSS, hardened and ground staggered cutting teeth.Cutter diameter (mm) = 63, Width of cutter (mm) = 8, Bore diameter (mm) = 22


5


#Total Rate


30 SLITTING SAW(Best Quality) Made of cobalt alloy HSS, hardened and ground cutting teeth.Width of cutter (mm) =, 3.Cutter diameter (mm) = 80.Bore diameter (mm) = 22.



Equivalent

2

31 HOB CUTTERS(Best Quality) Made of high quality HSS, hardened and ground cutting teeth, high wearing resistance.Right hand hob single start 20 degree pressure angle bore size 22mm module 1.75,2.00 .Right hand hob single start 20 degree pressure angle bore



Equivalent

1

32 DIGITAL OUT SIDE MICRO METER(Best Quality) Carbide tipped measuring surfaces metric and inch conversion measuring system.Large LCD numeral for easy reading.



Equivalent

5

33 DIAL CALIPER(Best Quality) Rack and pinion mechanism, depth bar sharp jaws edges, raised edges of beam.Measuring range (mm) =0-



Equivalent

5

34 DIGITAL HEIGHT GAUGE(Best Quality) Two measuring mode ABS and INC, LCD display with offset scribe carbide point.Measuring range (mm) = 0-300.



Equivalent

1

35 DIGITAL DEPTH GAUGE(Best Quality) Two measuring mode ABS



1


#Total Rate


37 COMBINATION SET(Best Quality) Three measuring heads attached to ground steel rule square head 45 degree and 90 degree, center head, protractor head 0-180, scribe, sprit level.



Equivalent

2

38 STEEL RULE(Best Quality) Sharp and clear graduation marks made of anti rust steelRange (mm) = 300.



Equivalent

10

39 RADIUS GAUGE(Best Quality) Made of fine steel radius sizes stamped, convex and concave radius with locking device.Measuring radius (mm) = 0.5-



Equivalent

5

40 DRILL SLEEVES(Best Quality) Ground externally and reamed internally, hard tang,



Equivalent

2

41 HAMMER (BALL PEIN) (Best Quality) Made of cast steel hardened and ground peen and face. Suitable wooden handle.Weight of hammer (Kg) = 0.250.



Equivalent

5

42 HAMMER (CROSS PEIN) (Best Quality) Made of cast steel hardened and ground peen and face. Suitable wooden handle.Weight of hammer (Kg) = 0.250.



Equivalent

5

43 ADJUSTABLE WRENCH(Best Quality) Made of forged steel, chrome plated



Equivalent

2

44 ELEN KEY SET(Best Quality)


TAIWAN/

2


#Total Rate


47 SURFACE TABLE Made of closed grain cast iron properly polished and aged fitted with suitable legs.Length x width x Thickness (mm) = 630x630x80.



Equivalent

1

48 OIL CAN(Best Quality)Steel body and metallic pump long spout.Capacity (ml) =500.Length of spout (mm) = 200.



Equivalent

10

49 GREASE GUN(Best Quality) Metallic body and metallic handle along with leather piston, with pointed and flaring nozzle.



Equivalent

2

END MILL ADAPTORCompactable with universal milling machine complete in all respect.



Equivalent50 Maintenance and Repair

Tool kitBall Peen hammer 2lbsFlat screw driver set 6”,8”,10”,12Philip screw driver setSteel measuring tape 3mmChisel flat 6”8”10”Steel measuring tape 3mChisel flat 6”8”10”Ellen key set 1.5mm-10mm(set of 9PCS)Steel rule 150mm-300mmVernier caliper 0-300mm(digital)Outside micrometer 0-25mmCentre punch Set of 4 PCSDrift punch SetFlat file second cut 8”10”



Equivalent

1

Try square 150mmGreece gun metal body Bearing puller 200m,250mm(3legs)



Equivalent

-


#Total Rate


1 3D CAD Software (Solid 252 3D CAM Software (Milling,

Turning, Turn/Mill, Wire 25

3 Simulation Software 504 SERVER SYSTEM 1

SPECIFICATIONProcessor 1 x Intel® Xeon® processor E3-1230 (3.20 GHz, 8MB Cache with Hyper-Threading Technology & Intel ® Turbo-Boost Technology) or higherMother Board Intel Original Motherboard with C202 chipset or higher (DDR3 MemorySupported)ECC Memory 4 GB DRR-III 1066 MHzHard Disk Drive Min 2x 500 GB SATA-3.0 Gb/s with 7200 RPM or higherDrive Controllers SATA-II controllerRAID Controller Integrated SATA RAID (Levels 0/1/10) and Option to Upgrade to RAID 5 via Software Key.I/O Ports & Expansion Slots Min 1 PCI Slots with at least Two PCI express. 2.0 USB slot withExternal Storage Support

Mouse & Key Board As per manufacturer standardsChassis Tower Casing, Power supply Manufacturer StandardPower Supply Single Power Supply as manufacturer's

5 3D Solid Modeling Software (Kinetics, Static and Dynamic

25

6 Machine Design Simulation 17 DESKTOP/CLIENT

COMPUTER

Processor Intel Core i3 processor i3-2120 (3.30 GHz, 3 MB Cache) or higherMother BoardIntel Original Motherboard

25

Mech-382 CAD / CAM

Total:-


#Total Rate


Sound CardBuilt-in Video Graphics display and sound card. Network Adapter Built-in Gigabit (10/100/1000 M bits per sec)LCD Monitor 17" LCD Monitor, Low Radiation, 1024 x 768 Resolution supportive. Mouse & Key Standard Keyboard and 2.0 USB 2-Button Optical Mouse with Scroll. CasingIntel tested Chassis/Power supplyManufacturer Standard casing with standard Power Supply I/O Interfaces andExpansion SlotsMin six USB 2.0 ports, Min Two PCI slots, etc.NetworkingNetworking equipment (Active and passive) complete and compatible

1

-

1 CNC Vertical machining Center3-Axis

TABLEWorking Surface 920x330 to 900x350 mm Max. table load 300 to 400 kg or greaterTRAVELLongitudinal Travel ( X ) 600-650 mm

UK/JAPAN / GERMANY Or

Equivalent

1

Mech-392 CNC MACHINES

Total:-


#Total Rate


STANDARD ACCESSORIES & SPECIAL ACCESSORIESHeat Exchanger Enclosed Splash GuardRemovable Manual Pulse Generator Flat Type Chip Conveyor & Chip WagonCoolant Around Spindle Rotary Table With 4th Axis ControlSpiral Type Chip Conveyor 4th Axis ConnectorSemi-enclosed Splash Guard Coolant Through Tool Interface Coolant Through Spindle With FilterAutomatic Power Off Coolant WashCall Light Automatic Tool Length Pendant Type Operator Panel Max. Tool Weight 5-7 Kg Spindle Cooler, Graphite Filtering SystemAlong with all necessary compatible tooling to perform 2 CNC Turning Center 2 Axis

Capacity

Max Turning Dia = 300-400 mmMax turning length=500-800 mmChuck size =150-200 mmBar capacity =40-45 mm

SpindleHole Through spindle =50—55 mmMotor output =7-7.5 kwDrive system =Belt driveSpindle drive ratio = 1:1


Equivalent

1


#Total Rate


CONTROLLERFanuc or equivalent

Tail StockQuill center Taper = MT# 4 (Live center required)Quill Dia. / travel =70-75 mmTailstock Base travel =275-300 mmProgrammable base type = servo motor+ ball screwAlong with all necessary tool holders and compatible tooling.

COMPLETE AND COMPATABLE IN ALL 3 CNC Wire Cut MachineSpecification• Work table size(mm): 800x400 to 900x600• X Travel (mm) 450-500• Y Travel (mm) 600-650 • Max. work piece thickness(mm): 250 to 300• Wire traveling speed(m/s): 8-12• Wire diameter(mm): 0.15-0.2• Max. cutting speed(mm/min): 100-120• Power Consumption ( Kva)= 1.5 – 2.0• Controller Type = Fanuc or Equivalent• Maximum taper angle /plate thickness =±30/100COMPLETE AND COMPATABLE IN ALL


Equivalent

1

4 SERVER SYSTEM 1


#Total Rate


SPECIFICATIONProcessor 1 x Intel® Xeon® processor E3-1230 (3.20 GHz, 8MB Cache with Hyper-Threading Technology & Intel ® Turbo-Boost Technology) or higherMother Board Intel Original Motherboard with C202 chipset or higher (DDR3 MemorySupported)ECC Memory 4 GB DRR-III 1066 MHzHard Disk Drive Min 2x 500 GB SATA-3.0 Gb/s with 7200 RPM or higherDrive Controllers SATA-II controllerRAID Controller Integrated SATA RAID (Levels 0/1/10) and Option to Upgrade to RAID 5 via Software Key.I/O Ports & Expansion Slots Min 1 PCI Slots with at least Two PCI express. 2.0 USB slot withMouse & Key Board As per manufacturer standardsChassis Tower Casing, Power supply Manufacturer StandardPower Supply Single Power Supply as manufacturer's

5 DESKTOP/CLIENT COMPUTER

Processor Intel Core i3 processor i3-2120 (3.30 GHz, 3 MB Cache) or higherMother BoardIntel Original Motherboard with H 61 chipset or higherFor local & Foreign BrandsMemory 2GB- DDR-III

10


#Total Rate


Network Adapter Built-in Gigabit (10/100/1000 M bits per sec)LCD Monitor 17" LCD Monitor, Low Radiation, 1024 x 768 Resolution supportive. Mouse & Key Standard Keyboard and 2.0 USB 2 -Button Optical Mouse with Scroll. CasingIntel tested Chassis/Power supplyManufacturer Standard casing with standard Power Supply I/O Interfaces andExpansion SlotsMin six USB 2.0 ports, Min Two PCI slots, etc.6 NetworkingNetworking equipment (Active and passive) complete and compatible in all respects.

1

7 Metal Cutting Band sawMotor =3Ø 2HPStep Saw Blade Speed / Variable Saw Blade Speed = 50Hz 95 164 239 314(FPM) 29 50 73 96(MPM) 60Hz 95-402(FPM) 29 122(MPM) / 50Hz 78-335(FPM) 24-102(MPM)Blade Size WxTxL = 27x0.9x3280mmDimension LxWxH 1720x620x1055mmCUTTING CAPACITY - -0° =Bar Ø250mm(10")45° =Bar Ø150mm(6")



Equivalent

1


#Total Rate


8 Maintenance and Repair Tool kitBall Peen hammer 2lbsFlat screw driver set 6”,8”,10”,12Philip screw driver setSteel measuring tape 3mmChisel flat 6”8”10”Steel measuring tape 3mChisel flat 6”8”10”Ellen key set 1.5mm-10mm(set of 9PCS)Steel rule 150mm-300mmVernier caliper 0-300mm(digital)Outside micrometer 0-25mmCentre punch Set of 4 PCSDrift punch SetFlat file second cut 8”10”Round File diameter (6mm,10mm,12mm)Try square 150mmGreece gun metal body

1

Pipe wrench 10”,12”Adjustable wrench 8”,10”,12”Open ended spanner 4mm-24mmElectric hand drill machine( 12mm)Twist drill set5mm,8mm,10mm,12mm(02,each)Tap set with handle 5mm,6mm,8mm,10mm( 01,each)Fix die set with handle 6mm,8mm,10mm,12mmTap extractor 6-12mmOil can ½ liter - Total:-


#Total Rate


4 Auto Levels• Magnification 28 – 32 X• Image: Erect • compensator type wire-hung/air damping / magnetic• Aperture: 35 – 45 mm• Field of view: 10 - 20’ to 10 - 30’,• Horizontal circle: 00 - 3600• Min. Focusing: 0.5 to 1.8 M• Stadia constants: 0, 100• Setting accuracy: 0.2” to 0.5”• Compensation range +12’ to 30’• Accuracy in double run 1 KM leveling, +2mm or better• Circular level sensitivity: 8’ to 10 /

Japan/ UK/ Germany or Equivalent

10

Accessories• Aluminum adjustable tripod, standard tool kit.• Plumb bob.• Instruction manual• Carrying case.

5 Auto Set Level : with built-in, Micrometer: (Tilting Level)• Magnification: 28 - 32X• Image: Erect• Aperture 35-40mm • Micrometer Least count 0.2mm• Min. Focusing: 0.5 - 1.8 M• Circular level sensitivity: 8-10’/2mm• Compensation range ±12’to 30’• Accuracy in 1 KM double run leveling ± 2mm or better• Horizontal circle-00-360 stadia constant:0, 100• Compensator type: wire hung/ air damping / magnetic dumping.


3

Accessories• Lens cap• Plumb bob• Took kit, dust cover• Carrying case • Aluminum adjustable tripod.• All standard Accessories

ITEMSSr # Remarks

GCT TAXILA

(a) SURVEY LAB

CIVIL TECHNOLOGY


QtySpecification Unit Cost

Total Cost without GST

Total Cost with

GST GST

ITEMSSr # Remarks QtySpecification Unit

CostTotal Cost

without GST

Total Cost with

GST GST

8 PLANE TABLE SETTABLE• Made of deodar wood, with metal corners, size 80x60x2cm (32’x24”x ¾ “)• Metal, clamp for fixing it on tripod• Heavy duty aluminum tripod. • Adjustable legs with shoe• Alidad Metallic head, shoulders and fly nuts etc.• Metallic/brass, (18” long) graduation one edge,• Plumbing fork• Trough compass (in aluminum / metal case)• Plumb bob• Circular spirit level etc. complete with all


2

9 Prismatic Compass with tripod:• Size : 6” (15cm)diaGraduation 00 -3600• Least count: 20minutesPill bubble: in built• Prism, sight vane brake pin, lifting pin and lid etc.• Aluminum tripod; adjustable legs and Metallic head (ball coupling type)• Carving case


10

10 Telescopic Alidade: • Image: Erect• Magnification: 08-12X• Aperture: 25mm to 45mm• Minimum Focus: 2m or batter• Stadia constants: 0, 100• Movable Range: 0 to 30mm• Vertical Circle Graduation: Half (0° - 90°) full• Vernior Arm: reading 10’• Alidad – length 20-30cm, beveled edge with detachable scale.• Mounted Pill Bubble.• Complete in carrying case kit and all standard accessories.


5

15 STEEL TAPE• Length 30 m, 13 mm wide• stainless steel with vinyl coating• Both face marking, one in m (0.1, 0.01, and 0.005m) and other in ft (inches & half)• first decimeter also marked for 0.001m

Pak/ China or Equivalent

15


CostTotal Cost

without GST

Total Cost with

GST GST

21 Ranging Rods(Two pieces)• Made of aluminum pipe 1” Φ• Two piece (5ft + 3ft) screwing


40

22 CROSS STAFF• Consisting of octagonal brass box with slits cut in each face, mounted on a 1.25M (4 ft) long rod with shoe at


10

24 OPTICAL Square• Prism type• 10 cm (4”) dia, metallic case with handle and carrying case complete.


8

26 MALLET• Hardwood head dia 75 mm• Complete with handle 400 mm long fixed into the head.

Pak Made/ China or

Equivalent

10

27 ABNEY’S LEVEL• Telescope square aluminum body.• Magnification: 8 x or better• Image: Erect• Simi-circle ARC graduated in degree (00 + 900) and percent (0-100%)• Vernier arm reading: 10’• Magnifying glass.• Carrying case and all standard


2

28 SOUNDING ROD (Aluminum)• Two pieces with screwing arrangement: (2.5m each) • 4 cm (1-1/2”) dia• With shoe at the bottom• Painted and marked in metric units, graduated in m, and 0.1m

Pak Made/ China or

Equivalent

10

29 PLUMB BOB• 100-130 gms weight• Brass polished• Replaceable blued steel pointer• Screw cap with strip indicator

Pak Made/ China or

Equivalent

10

PLANIMETER• Polar type with computing function.• LCD 8-10 digits display• Area measurements in cm2, M2, KM2, in2, ft2, Acres• Measuring range: Pole outside the area 250-350mm dia


130


CostTotal Cost

without GST

Total Cost with

GST GST

37 Spring Balance:• Dial gange type with Hook & grip handle.• Dial gauge 0-50kg• Mim reading 200gm


10

38 Barometer:• Precision barometer for measuring atmospheric pressure and altitudes.• Fixed dial for pressure meanrenats and rotating dial for altitude calculation• Pressure gauge: 970 – 100kpa• Division 1 hpa• Height Range: 0-6000m• Divion: 10m• Dia of Gauge: 50mm or greater.• Complete carrying case and all standard accessories.


2

-

1 Compression Testing Machine (1500 KN Capacity) Digital display. For testing concrete cubes (15cm X 15cm) and cylinder(30cmX15cm), For testing cement mortar cubes (5 x 5 cm). For split cylinder tensile test 16x32cm specimen . Flexure test for 15x15 x 60cm concrete beam/timber beam (3rd point loading) also for other materials . Motorized with controllable rate of loading . Frame:steel fabrication with cover for protection. Loading Capacity: 1500KN. Platen Diameter: (200-

Japan/ UK or Equivalent

1

. Sensitivity: 0.1KN

. Measuring units: KN, lb, kg. etc.

. Minimum reading display: 0.5 KN

. Power port (RS 232C) + data downloading cable to PC alongwith software. Load Pacer: Pacing rate 2 KN / Sec to

(b) MATERIAL TESTING/SOIL MECHANICS LAB (Concrete, Highway & Soil

Total Surveying Lab:


CostTotal Cost

without GST

Total Cost with

GST GST

Standard Platen -Distance pieces (for testing all above Cube, Cylinder and beam Moulds) -Splitting cylinder tensile test assembly -Flexure test assembly for 15 x 15 x 60 cm beam Mortar cube test assembly: -All in working condition , installation at site -Instructional manual -Calibration of Machine is required to be done at College and calibration 2 Flexure / Tension Machine (cement, Mortar, Briquette Tensile Testing)Confirming to ASTM• Automatic Machine 0KN capacity • Application of load by a weight travelling along the beam driven by motor at a constant increasing rate.• Power supply 220V, 50Hz single phase tensile testing jaws, standard briquette mould (two parts construction complete with base plate made of steel, easy


1

5 Top Pan Weighting Balance Capacity 20 kg or batter • Sensitivity: 1gm • Stainless steel Pan: size 200mm to 300mm dia• Graduated beams with sliding weights complete with set of counter weights • Hook for below weighing complete


3

6 Vicat ApparatusStander vicat apperatous for cement consistency and setting time tests • According to ASTM and BS specs.• The frame with scale and adjustable foot screw alongwith consistency plunger 300 gm, 10mm dia (2 set) • Initial set Needle (1, 1.13 mm dia, each set of 6 needles)• Conical mould (brass 80 mm dia and 40 mm height with a ring)• Glass base plate / cast iron (120mm


8


CostTotal Cost

without GST

Total Cost with

GST GST

7 Lechatlier's ApparatusTo perform soundness test on cement paste according to EN Specs, comprising of:-• Standard Lechatlier mould 30mm dia & 30mm height (chromium plated brass with split cylinder fitted with two indicator stems 150mm long (3 Nos.)• Glass plate 50x50mm (2 Nos in each set) (3 sets)• 100gm weight to cover top glass plate (3 Nos.)• Standard tamping rod 17mm dia and weight 70g (01 Nos)• Lechatler water bath: stainless steel


2

11 Sieve shaker• Shaker capable of accommodating eight 200 mm (8”) dia sieve plus lid and pan or sieves 300 mm (12”) dia sieves plus lid and pan• Shaking; vertical / circular or both• Timer and on –off switch• Power supply single phase, 220V, 50 Hz


3

12 Speedy Moisture Content Apparatus• Moisture range 0-20%.• Gauge Division 0.2%.• Sample Weight 6g. Complete with standard testing App., guage, steel balls, weighing balance, scoop, cleaning cloth, brush, one can of calcium carbide powder (400 gm), wooden box to house the App. and


8

13 Standard Proctor Compaction Apparatus: . According to ASTM specs, complete with. Standard proctor mould Dia 101.6 mm Hight 116.4 mm Vol. 944 cm3. Including body, coller, base plate,wing nuts made from cadium plated steel etc.. Standard proctor compection hammer, cadimum steel with guide sleave weight 2.94 kg dia 50.8 mm drop 304 mm. Hard rubber hand knob,


8

14 Modified Proctor Compaction Apparatus:. According to ASTM specs, complete with:. Modified proctor mould Dia 152.4 mm Hight 116.4 mm


8


CostTotal Cost

without GST

Total Cost with

GST GST

16 Constant Head Permerbility Apparatus Confirming to BS 1377:5 Complete with 3 manometer tubes, Metal stand comprising 3 constant bore tubes, meter scale, nipple and connecting tubing,

USA/ UK/ Germany or Equivalent

1

21 Soil Samling Kit, Soil Auger with head dia 80,100,150mm , 10 extension rods each 1 meter long, steel handle, 10 sampling tubes with adopter, jarring link, all accerries for taking sample, matel / wooden carrying case


5

23 Standard Penetration Test ApparatusASTM/AASHTO* SPT complete with split sample spoon SPT Hammer and drilling rod of 40 - 50 with drilling rod for 40 meters.* SPT sampler consisting of:1) A tube split longitudinally into two parts, the upper end to be fitted to the rod coupling.2) Cutting shoe to be fitted to the lower end.3) Ball valve fitted to rod coupling.* Steel rod 50mm dia, 3000mm long* Nipple for 50mm dia rod* Rod coupling 50mm dia to be fitted to

USA/ EU/ UK or Equivalent

2

24 Marshal Stability Test (30KN Capacity)Loading Device, Proving Ring, Flow Meter, Test Head, Marshal Mould, Sampling Collar, Specimen Sampler, Sampling Rod, Tamper, Load Measurement(Load Ring 30KN), Flow Meter


2

25 Saybolt ViscometerThermometer (70 - 210 F)ASTM - D88 Viscosty tube orifice, Funnel and withdrawal tube, Cooling coil, 60ml flask and digital thermoregulator.Stainless steel orifice


2

26 Bitumen Ductility Test Apparatus Conforming AASHTO-T51• Test machine for pulling briquette of bitumen by maintain the standard temperature, speed and stroke• Water bath with thermostat• Thermometer and


1


CostTotal Cost

without GST

Total Cost with

GST GST

28 Softening Point Test (Ring & Ball Apparatus) ASTM D 38two brass rings, two steel balls (9.5mm), Heater, Megnatic Stirrer Unit, ring holder thermometer, glass vessel,


2

30 Penetration of Bituminous Material Penetrometer, Penetration Needle (2.5 grms, water bath, thermometer 8 - 32°C timing device), (Sample Cub Dia 55 x 35mm set of 6)


2

32 Extraction of Bitumenfrom Bituminous pavingCentrifuge extractor confirming to ASTM D2172Bond capacity = 1500 g – 2000 g(Trichloroethylene or dichloromethane pack 10kg, 0-3600rpm, 1500gm fitter disk box of 100 liter Valuable speen driven unit 0 to 300 Spare bowel


2

33 Non-Destructive Test (Concrete Test Hammer)confirming ASTM, BS for testing the quality of concrete in finished structuresupply complete with carbo randum stone and plastic carrying casestrength range: 10-70 N/mm2


2

36 Shearing Force Apparatus:Demonstration of shearing force in a loaded beam.* Two parts beams with parallelogram joint and a force gauge to measure the shearing force in the section plane* Loading with 3 appropriate weight sets with hanger, complete with all


8

37 Bending Moment Apparatus:Demonstration of bending moment in a loaded beam* Two parts beam with special joints and forces gauge to measure bending moment in the section plane


8

38 Loaded Beam Assembly:To determine the reaction at the supports of a beam and verify the principle of moments, comprises:* Six beams hanger


8


CostTotal Cost

without GST

Total Cost with

GST GST

39 Deflection of Beam Apparatus: To show that deflection is proportional to the cube of span, and that the deflection is proportional to load complete apparatus. Comprises of:* Rigid frame (1.22x0.76m) approx. having test span of 1m* Sets of weight (up to 50Kg 4 sets)* Two steel beams of 3 & 5 mm thickness and 1.1 m length* two movable knife edge supports to carry one beam at a time* Load hangers (4 Nos)* Dial gauge with adjustable stand* complete with


8

48 Tray (Galvanised Iron, 14 SWG) SET600X450X80mm,600X600X80mm750X750X80mm80mm hight

Pak Made/ China or

Equivalent

10

49 Pycnometer50ml (Pycnometer - specific Gravity Bottle) capacity complete with stopper capillary tube and funnel pyrex /

Pak Made/ China or

Equivalent

10

51 BeakersPyrex / Borosilicate glass with spout, 600Ml capacity graduated


20

3 MOULDS: - e) beams 150 x 150x600mm (6"x6"x24") made of

steelPak/ China or Equivalent

10

5 Vibrating Table• to facilitate compaction of concrete in moulds • Table mounted on steel stand with clamp assembly • Vibrating surface size: 80x40cm approx.• Maximum loading capacity 20 Kg or More• 220-240v, 50 Hz, single phase.

USA/ UK or Equivalent

2

7 Slump Test Apparatus* To perform slum contest for concrete according to BS1881, ASTM-C-143 specifications consisting of:

Pak Made/ China or

Equivalent

10

(c) CONSTRUCTION LAB

Total:


CostTotal Cost

without GST

Total Cost with

GST GST

14 Mason Trowel* Tampered and hardened Carbon Steel Blade* Square tip blade 20-28cm long


10

15 Chiesel Set (9"-12"-18") Pak/ China or Equivalent

10

16 Brick HammerForged steel rectangle head and tappered tip weight= 250-400gm


25

17 HammerForged steel rectangle head and tappered tip weight= 1Kg Wooden handle (40cm long) with


10

18 Plumb Bob* Weight = 100-130gm* Screwed Cap* Strup indicator


25

19 Mason's Spirit Level* Aluminium = 2 ft. length* Three Vials


25

21 Shovels with handleHardened and tempered steel blade, rounded point


10

22 Kassi (Plies) with handleTampered and hardened steel square


10

23 Spirit Level (Alumen 2 ft. length) Pak/ China or Equivalent

25

24 Pick AxeHardened and tamper steelShape: Chiesel end pointWight = 4 KgWooden handle= 75 cm long


10

25 Steel float Set(Small, medium, large)Wooden Handle


10

26 Wooden Float(small, medium, large)Wooden Handle


25

Wooden Scaffolding for Mason

Bamboo (10 feet)Pak/ China or

Equivalent 60

27


CostTotal Cost

without GST

Total Cost with

GST GST

31 Mixing Spoon Setheavy guage stainless steel, 150mm, 200mm, and 250mm long, round buttom


25

32 Tray (Galvanised Iron, 14 SWG) SET600X450X80mm, 600X600X80mm750X750X80mm 80mm hight


20

33 Pointing Trowel* Tampered and hardened Carbon Steel Blade


25

34 Pointing Tray Tampered and hardened steel plate with Wooden handle underneeth* Size = 400x400xthickness 3 m


20

35 Striker for vertical joint (pointing)Tampered and hardened steel


25

36 Striker for horizontal joint (pointing)Tampered and hardened steel


25

-

1 ADJUSTABLE WRENCH Set• Hardened, tempered and chrome plated steel.• set including 18” (450 mm), 12” (300


20

2 Pipe Wrench Chain Type• For large pipes handle and chain from carbon /drop forged steel jaws and connector’s induction harden.


10

3 ADJUSTABLE PIPE WRENCH• Handle drop forged hardened and tempered,• Jaws induction hardened, • frame and handle painted,


20

4 PIPE REAMER• High speed steel straight flute, • Parallel hand reamer, left hand spiral, right hand cutting, • 50 mm dia.


10

5 PIPE VICE (STAND TYPE) Pak/ China or 10

(d) PUBLIC HEALTH ENGINEERING & HYDRAULIC LAB

Total Construction Lab:


CostTotal Cost

without GST

Total Cost with

GST GST

12 STEEL TAPELength 5m, with slide lock, power/automatic return, graduations on both sides in m & ft, plastic / metallic


20

13 Mason’s Spirit Level 600 mm and 1200 mm long, one each box section level, hardened aluminum, powder coated finish, one horizontal vial


20

16 SCREW DRIVER SET• Flat blade, flared tip.• Chrome steel blades/shafts properly tempered and hardened.• Shot blasted tips.• PVC/Polypropylene cabinet handles.One each :Length Blade diamm (in) mm (in) 75 (3) 5 (3/16)100 (4) 6 (1/4)150 (6) 8 (5/16)200 (8) 9.5 (3/8)250 (10) 9.5 (3/8)


20

17 Trowel (200-280 mm long steel)For general purpose• Tempered and hardened steel.• With wooden handle.


20

18 Mortar Pan • G.I. sheet made (22SWG).• 18” dia., 22 gauge.


20

19 Shovel with handle9” (225 mm), square / round point, forged steel blade / D-shaped handle


10

21 Bench Vice• 4” (100 mm) jaw width.• C.Iron body.• Steel screw.• Hardened carbon steel interchangeable


5

27 MELTING POT• For lead , fitted with lip , handle and legs.


4

28 LadleHeavy Forged steel bowl having a lip


5


CostTotal Cost

without GST

Total Cost with

GST GST

36 METACENTRIC HEIGHT MEASURING APPARATUS: Experimental Capabilities• Determining the center of gravity of the pontoon.• Determining the meta-centric height and from this the position of the meta-centric for the pontoon.• Varying the meta-centric height with angle of heel.Consisting of: arrangement for floating pontoon, body plastic / any non-corrosive light material, vertical mast having adjustable weight/sail with a toothed sideway; plumb bob suspended at top of

Japan/ France/ UK or Equivalent

2

37 HYDROSTATIC PRESSURE APP.For totally / partially immersed surfaces comprising of: • Clear Perspex fabricated quadrant,• balance arm pivoting on knife edges;• set of weights; • Quadrant Fixed scale: calibrated from horizontal axis 160 - 200 mm, downward and 40 - 100 mm upward ,

Japan/ France/ UK or Equivalent

2

39 MANOMETER (U-TUBE)Free water manometer, standard length one meter, glanded glass manometer tubes, engraved plastic scale, calibrated

Japan/ france/ UK/ Spain or Equivalent

2

40 FLOW OVER WEIR APPARATUSExperimental CapabilitiesFlow characteristics demonstration over a rectangular notch and a vee (V) notch.Determination of the discharge coefficients.SpecificationWier Plates:Height: 160 mmWidth: 230 mmThickness: 4 mmRectangular: Notch: Height: 82 mmWidth: 30 mmAngle of vee notch weir: 90°Hook & point gauge: 0-150 mm, ±0.1 mm


5

41 PITOT TUBEExperimental Capabilities:• Static and Dynamic pressure measurement


5


CostTotal Cost

without GST

Total Cost with

GST GST

45 Turbidity Test ApparatusPortable, Digital, Hand heldBattery operatedRange: 0-50 NTU and 0-1000 NTUAccuracy: ±1% of full seedsComplete with standard accessories.


2

-

3 Net working (Cables, connections etc) 19 Plotter LaserJet A-0 Size 110 License software for education Latest

Auto CAD 50Prima Versa 50M.S. Office 50

-

1 Instruments BoxSpecial Compass Set


5

2 Tee Square(600 mm)Transparent

Local or Equivalent

5

3 Set SquareTransparent medium size (300 mm)

Local or Equivalent

5

4 TemplatesCircle Square, Hexagon, Triangle (03

Local or Equivalent

2

5 French CurvesGood Quality, medium size


2

6 Clutch Pencil (0. 5 mm)


12

7 Eraser Pak/ China or Equivalent

12

8 Sharpener Machine Local or Equivalent

5

9 Portable Drawing Board(3’x2’ with scale)


5

10 Drafting Machine Elbow typeTable size A o complete with all accessories

Japan/ UK/ Germany or

1

(e) COMPUTER APPLICATION / AUTO CAD LAB

(f) DRAFTING LAB (DRAWING HALL)

Total e) Computer Application / Auto Cad

Total Public Health Engineering &

1 Jaw Crusher, :with 3 phase 50 to 220 volt, V.Belt Drive with 3 to 3.5 jaw opening, 500 RPM speed capacity50-150 ib/hr.bench space 14.5x21 to reduce rock lamps from 2.5 dia to pass on 10 mesh or finer sieve jaws made of manganese steel


2

2 Pulverizer:Bron/c casting steel rotor 220 volt, 3 phase, 50N, I HP Motor 2600 RPM with V.Belt drive at guards 1.00 ammeter Extra retaining screen with fabric bags for oulet mounted on legs 2 casters for easy


1

3 Centrifugal pump: with 1/2 HP motor single phase capacity 250gal/min, 30 feet head for 220


2

4 Sample Grinder:Open door dice tyhpe with locking hand wheel to regulate product size antiracism bearings, cast iron traction with stud dises 0 with 6" dia dise capacity 200Ib/hr at 20mesh with 2 HP motor, 220 Volt 50 N mlounted on a


2

5 LabBall mill: for wet and dry grinding for ores etc. Sixe: 16" dia mill, 16"x16" with welded stud base extra thick shell with integral cast lifter bars. Capacity: 150Ib/hr complete wsith 250 Ib of stud balls with 1 1/2 HP 3 phase motor 550


1

7 Sieve Shaker:Height 32" width 34" depth 17" weight in cladding 0.25 HP motor and time switch Capacity: 290Ib for 115 vac. 60HZ speet 1750

Pak Made ISO Standarised or

Equivalent

1

14 Portable mixer, with direct drive 4 inch diameter, Stainless steel propellers. 1/4 HP single phgase 50


4

15 Mixing Tank: Capacity 10 gallons stainless steel dull polished inside, Desalted ouside slopping bottom of out let connection rein forced top brim steel legs. Complete with ss cover. Outlet valve casters and mixer frame


4

19 Water Deminerilizer :Equipped with different cell shoring % sodium chloride, water in put/ Out put flow rate 501/hr power 220-240v

Germany/ Japan or Equivalent

4

20 Viscosity bath (0-40c): Sample holding capacity 4-6no thermostatic control stain less steel and glass frame for oil bath auto - stirring and their or stting. Operating voltage


2

21 Visocosity bath 100c: Adjustment of set point temperature, sample holding capacity 4-6 no with timer and stirring facility, power 220v stainless steel glass body for oil contact


2


GCT TAXILALIST OF EQUIPMENT FOR 50 STUDENTS

RemarksSpecificationSr #

CHEMICAL TECHNOLOGY

ITEMS Total Rate without GST

Total Rate with

GSTGSTQty Unit

Rate

RemarksSpecificationSr # ITEMS Total Rate

without GST

Total Rate with

GSTGSTQty Unit

Rate

23 Tetrameter (Automatic):Ph 0-14, mv 100-1400 with stirring system. Burette stand electrodes with stand power 220-240v

UK/ USA or Equivalent

4

26 Hand die threading set:Universal quick opening die head, with drop head threader size: 1/8 inch 1.25


2

28 Smoke detector:Portable, standard Germany/ Japan 1029 Rectifier:To convert AC to DC Ac

in put 220v Dc voltage up to 12v ampere up to 500


2

31 Nephlo meter (digital portable):Both for coarse and homogeneous solutions. Power


1

32 Magnetic stirrers with hot plates:Electric speet regulation of 150-2000 rpm Slectable reversible stirring motion


20

34 Diesel index determination Apparatus:According to A D IN / ASTM STANDARD


2

36 Electric Drill Machine:Aluminum body type, Tap am mode with complete bit set Size: 1.5mm - 12.5mm 220v, 50-single phase


4

42 CHEMICAL OXYGFEN DEMOND APPARATUS (Reactor +spectrophot meter)Digester / reactor with 25 vials capacity


1

43 First aid kit:With all accessories Pak/ China or 444 Glass electrodes:Can fitted with PH

Meter and tetrameterGermany/ Japan

or Equivalent6

45 Calmel electrodes:Can fitted with PH Meter and tetrameter


6

46 Paltinum ElectrodesFor conductivity bridge


6

52 Viscometer Germany/ Japan 1453 Stalagmometer Germany/ Japan 2654 Kipps / Apparatus Germany/ Japan 256 Glass Cyulinder Germany/ Japan 2463 Measuring Cylinder (20mL) Germany/ Japan 1864 Measuring Cylinder (10mL) Germany/ Japan 1265 Specific Gravity Bottles (25ml) Germany/ Japan 1268 Retort Germany/ Japan 10


without GST

Total Rate with

GSTGSTQty Unit

Rate

12 Cement analyzer (computerized) UK/ USA or 113 First aid box Pak/ China or 214 Trolley (3*1.5 ft) Pak/ China or 3

1 Stainless steel portable fixer batch Pak/ China or 22 Continuous type Pak/ China or 23 Water softener (mixed bed type) Pak/ China or 24 Electronic aqua analyzer Pak/ China or 25 Cation type Pak/ China or 16 Anion type Pak/ China or 17 Vitamin tester (digital) UK/ USA or 28 Double jacketed soap pan Pak/ China or 29 Bladder Pak/ China or 110 Cake cutter Pak/ China or 111 Dye set Germany/ Japan 312 Pilot plant of ghee China or 113 Pilot plant of sugar China or 1

14 Control trainer for temperature measurement

UK/ USA or Equivalent 1

15 Control trainer for pressure UK/ USA or 116 Control trainer for flow UK/ USA or 1

1 Burner Pak/ China or 57 First aid box Pak/ China or 18 Trolley Pak/ China or 111 Boiling point apparatus Germany/ Japan 212 West paul balance Germany/ Japan 513 Density motor Germany/ Japan 214 Redwood viscometer Germany/ Japan 515 Saybolt viscometer Germany/ Japan 216 Ostwald's viscometer Germany/ Japan 5017 Staglmometer Germany/ Japan 5018 Torsion balance Germany/ Japan 5

Total:

ORGANIC PHYSICAL LAB

INDUSTRIAL CHEMICAL PROCESS LAB

Total:

Total:


without GST

Total Rate with

GSTGSTQty Unit

Rate

29 AC Germany/ Japan 2

1 Hydraulic bench and accessories UK/ USA or Equivalent 1

2 Multiple pump test Rig with UK/ USA or Equivalent 2

3 Boiler Pak/ China or 16 Water heater Pak/ China or 17 Air heater Pak/ China or 18 Climbing & falling film evaporator UK/ USA or

Equivalent 1

9 Swenson walker Crystallizer with accessories

UK/ USA or Equivalent 1

10 Vacuum Crystallizer with UK/ USA or Equivalent 1

11 Centrifuge UK/ USA or Equivalent 3

12 Plate and frame filter press with UK/ USA or Equivalent 1

13 Rotary drum filter with accessories UK/ USA or Equivalent 1

14 Leaf filter with accessories UK/ USA or Equivalent 1

15 Disc meter Germany/ Japan 216 Energy meter Germany/ Japan 217 Tachometer Germany/ Japan 218 Rotary Dryer with accessories Germany/ Japan 119 Vaccume Dryer with accessories Germany/ Japan 120 Spray dryer Germany/ Japan 121 Vacuume furnace Pak/ China or 122 Convection furnace Pak/ China or 123 Seive shaker with seive set & Pak/ China or 124 Pulverizer hammer type with Pak/ China or 125 Disc mill Pak/ China or 126 Ball mill & accessories Pak/ China or 127 Pebble mill & accessories Pak/ China or 128 Tube mill & accessories Pak/ China or 129 Blake jaw crusher (complete Pak/ China or 130 Dodge jaw crusher (complete Pak/ China or 131 First aid box Pak/ China or 132 Aluminium Ladder Pak/ China or 133 Electrician kit Pak/ China or 134 Trolly Pak/ China or 1

UNIT OPERATION LAB

Total:

COMPREHENSIVE WORKSHOP/LAB

Total:-


without GST

Total Rate with

GSTGSTQty Unit

Rate

20 Flash point tester UK/ USA or Equivalent

221 Aniline point tester UK/ USA or

Equivalent2

22 Pour point tester UK/ USA or Equivalent

223 Cloud point tester UK/ USA or

Equivalent2

24 Gate Valve Germany/ Japan 625 Globe Valve Germany/ Japan 626 Check Valve Germany/ Japan 627 Safety Valve Germany/ Japan 628 Butter fly Valve Germany/ Japan 629 Plug cock Valve Germany/ Japan 530 Expansion steam trap UK/ USA or

Equivalent6

31 Bucket steam trap UK/ USA or Equivalent

632 Impulse steam trap UK/ USA or

Equivalent6

33 Coloured photo copier UK/ USA or Equivalent

134 Liquid Print photo copier UK/ USA or

Equivalent1

35 Powder Print photo copier UK/ USA or Equivalent

136 Over Head Projector Germany/ Japan 237 Opaque projector Germany/ Japan 238 Aluminium Ladder Pak/ China or 139 Work bench Pak/ China or 240 First Aid box Pak/ China or 141 Trolly Pak/ China or 1

Grand Total:Total:

14 IC TesterFor Test/ Checking of TTL & CMOS ICsWith all accessories and Operational Manual in English

Taiwan/ Korea /USA or

Equivalent

5

6 Microwave Guide Components Taiwan/ Korea /USA or

Equivalent

1

8 Microwave test Benches Taiwan/ Korea /USA or

Equivalent

1

Total Advance Electronic Lab:Additional Items

Sr # ITEMS Specification Total Rate

without GST GST Remarks Total Rate with

2. Telecommunication Lab:

COMPARATIVE STATEMENTLIST OF EQUIPMENT FOR 50 STUDENTS

GCT TAXILATELECOMMUNICATION TECHNOLOGY

Qty Unit Rate

3 Mechatronics Work Cell with Machine Vision and Sensors

Taiwan/ Korea /USA or Equivalent 5

5 Manufacturing System Flexible Manufacturing System

Taiwan/ Korea /USA or Equivalent 1

Qty

COMPREHENSIVE MECHATRONICS LAB:

RemarksUnit RateTotal Rate

without GST

GST

Total

COMPARATIVE STATEMENTLIST OF EQUIPMENT

GCT TAXILAMECHATRONIC TECHNOLOGY

ITEMSSr # Total Rate with GST Specification

6 Fletcher’s trolley with all accessories (Standard)


12

16 Searl's apparatus/young's modulus apparatus(Standard with range of 3 kg)


12

18 Measuring tap Pak/ China or 1219 Steel wires 0.45mm dia swg 26 steel

0.36mm dia swg 29 steel0.45mm dia swg 26 brass


50

25 Tuning forks (25 set of 16 forks) - (consisting forks of frequency approx. (440 hz, 512 hz,480 hz)


25

28 Thermometer (different scales) China made - ½ degree upto 110º c½ degree upto nearly240º f


50

30 Screen Metal 300rnm x 300mm painted white


25

31 Electrical lamp -Table lamp type adjustable height and direction


25

32 Point source adjustment - Wooden box type (Standard)


25

47 Spirit Level - Horizontal bubble Pak/ China or 5049 Sextant with all accessories -

Educational model (Brass frame mm, Scale reading 0 to 130 degree


12

58 Wet and dry bulb hygrometer Pak/ China or 1259 Beakers - 250ml (Standard) Pak/ China or 5064 Resined Flannel (Standard) Pak/ China or 2

-

4 Funnel a) light glass - 3 inches or 75mm

Pak Made/ China or Equivalent

25

9 Thermometer of different scale - (110 Germany/ Japan or 44

13 Cork with hook Pak/ China or 2515 Glass Pipe Pak/ China or 10

80

10

30

49

10

CHEMISTRY LAB

2 Beaker - 250ml

GST Total Rate with GST

40


Pyrex/ Germany or Equivalent

UK/ Japan or Equivalent

7

Germany / UK or Equivalent


5

30

30

6 Filter paper - 10 x 12 inches



PHYSICS LAB

Description of Equipment Qty Unit Rate

Total Rate without GST Specification

3

12

1 Beaker 100 ml

Magnifying Glass - 3”

Sodium lamp (18 watt) (Standard)

LIST OF APPARATUS

Total:

5




45

Spring balance - 100. 250, 500 gm 4

Two, Litres Measuring Cylinder or a bell jar or a long form beaker Chromatograph Tank (100ML)

Spirit lamp - With stop cork

GCT TAXILA

RemarksSr. No.

RELATED STUDIES

Beaker - 500 ml

Universal pH Paper Range - '1-14



16

11

12

Ostwald Viscometer

GST

40

Description of Equipment Qty Unit Rate

Total Rate without GST Specification

3 Magnifying Glass - 3”

Sr. No.

Pak/ China or 17 Pipette 10ml Germany/ Japan or Equivalent

25

19 Analyticl / Electronic Balance - 0.1 gm to 500 gm

6

20 Crucible with lid 10

22 Pipette sucker (Digital) Germany/ Japan or Equivalent

25 -

23 Stalagmometer Germany/ Japan or Equivalent

50

24 Pinch Cock Pak/ China or 5026 Hoffman's Voltameter UK/ Japan or 1028 Battery (12 V) D.C /Adapter - 300

milliampereUK/ Japan or Equivalent

10

36 Platinum wire Pak/ China or 2540 Measuring Flask - 1000 ml Pyrex/ UK or 10

Graduated Cylinder (100 ml) Pyrex/ Germany or Equivalent

25

Graduated Cylinder (50 ml) Pyrex/ Germany or Equivalent

25

49 Fusion Tube Pak/ China or 250

55 Water Bath - Ordinary Size Japan/ UK or 20

57 Tongs Pak/ China or 25

5

10

UK/ Japan or Equivalent



5

5

5

200




Stop Watch - Digital

18

21

Specific gravity bottles - 25 ml

31

32 Test Tube - 16 x 150 mm

30

Pyrex/ Pak Made or Equivalent

Test tube brush Good quality

52

20

30

5

Conical flask - 250 ml


56


34

41

44

45

Dropper

Burette - 50 ml

1

Copper Foils (5cm x 3cm) - 5cm x 3cm


Ammeter - 0-3 ampere


Burette Stand

9

Generator Supply of 100 KVA to 150 KVA prome power, diesle generator set.. 400/230 v, 50 Hz. 3 Phase, 1500 RPM, 0.8 Pf.. Battery tray and leads with necessary accessories.. Imported Sound proof Canopy. Designed with Modular Principles.. Easy Lifting and Move.. Supply and installation of locally fabricated ATS/AMF panel assuming one wapda meter and load of Wapda matching with Gen-set.. Construction of Civil Foundaiton Pad and ground floor (with Capacity to bear twice the weight of Gen-set). . Self Start

JAPAN/ UK/ GERMANY /TAIWAN Or Equivalent

1

14 Library Software - 1

15RFID security system(1650x320x90) with RFID Paper Tag) + double checker Fq 8.2 Mhz (SMO)

TAIWAN/ JAPAN/ UK/ GERMANY Or Equivalent 1

19 b) Smart boards (with multimedia all acessories)

TAIWAN/ JAPAN/ UK/ GERMANY Or Equivalent 6

Total:

COMPARATIVE STATEMENTLIST OF EQUIPMENT

RemarksQty Unit Rate Total Rate with GSTDescription of Equipment

GCT TAXILA

Sr. No.

OFFICE EQUIPMENT

GST Total Rate with GSTSpecification

TERMS AND CONDITIONS - Punjabeproc.punjab.gov.pk/BiddingDocuments/15788_Tender Document.pdf ·...

Documents

Transcript of TERMS AND CONDITIONS - Punjabeproc.punjab.gov.pk/BiddingDocuments/15788_Tender Document.pdf ·...