JW SERIESJAW CRUSHERS

Terex® Minerals Processing Systems

DESIGNEDTO DELIVERTerex® JW SeriesWe have been manufacturing jaw crushers for 120 years and over this period have gained a reputation for producing heavy-duty machines to match the most arduous crushing conditions encountered.

All of this experience has been used in the design of our JW Series of Single Toggle Jaw Crushers, built for trouble-free operation in heavy and continuous applications. Designed to suit Track, Mobile or Static plant installations these rugged machines are manufactured with heavy-duty components for optimum operation and long life.

Typical applications for our single toggle jaw crushers are in mining, quarrying and recycling. The jaw crushers handle ores, rock, gravel and recycled concrete.

Each machine is backed by the Terex® Minerals Processing Systems total after-market service and spare parts.

Long life, low maintenance and reduced operating cost Robust frame design and large diameter, forged main shaft with no threads or sharp radii that can cause stress concentrations.

Simple installationAdaptable mounting arrangement suitable for static or mobile installation.

Easy adjustment Hydraulic closed side setting adjustment through a hydraulic wedge arrangement fully enclosed within the crusher frame.

Simple maintenanceJaw-faces are retained by a mechanical wedge locking system removing the need to access bolts behind the front and rear of the crusher. Replaceable backing plates protect the jaw-holder and mainframe at jaw-face location points.

Even distribution of crushing forces across the jaw locationsMachined jaw-face locations.

Bearings kept free from dust and waterGrease-purged labyrinth dust seals.

Reliable operation with minimal downtimePrecision machined cast jaw-holder, “rolling-end” non-lubricated toggle and self aligning spherical roller bearings combine with a high strength shaft and mainframe to provide extreme reliability which has become well known in the industry.

Smooth running operationBalanced fly wheel and drive pulley.

3

Benefits and Features

1

23

4

5

6

7

8

9

10

JW Series Jaw Crusher Construction

BUILTTOUGH

4

JW40

1. Protector plate2. Moving jaw retention wedge3. Abrasion resistant side liners4. Fixed jaw retention wedge5. Replaceable backing plate6. Rolling end toggle

7. CSS wedge adjustment8. Hydraulic tension spring9. Extended jaw-face liners for discharge protection10. Bolted support feet can be arranged for fixed or mobile applications

5

Main frame

The main frame is a heavy-duty design, fully field-tested under arduous conditions.

The frame is a fully bolted and dowelled four-piece structure. Both the front and rear frames are cast high strength steel with the side plates produced from high strength structural plate.

Closed side setting adjustment

The crusher closed side setting is infinitely adjustable within setting limits through the actuation of hydraulically controlled wedges and tension rod spring. The wedge assembly is fully contained within the crusher frame.

A hydraulic power pack, positioned close to the crusher, provides push button control.

6

JW Series Jaw Crusher Construction

RELIABLE

Main shaftThe main shaft is of large diameter and is forged from hardened and tempered alloy steel to suit heavy-duty applications. The shaft has high fatigue resistance because of its quality surface finish and the absence of screw threads and sharp radii that can cause stress concentrations.

BearingsHeavy-duty self-aligning double row roller bearings are used for both the jaw-holder and main frame.

Dust sealsGrease purged labyrinth dust seals.

Jaw-holderThe jaw-holder is a robust, one-piece alloy steel casting for high strength and durability.

7

Jaws

Reversible high quality cast manganese jaws guarantee long service.

The back faces of the jaws are machined for firm support.

The mainframe and swing jaw-holder are protected from wear due to the design of the jaw-holder that completely protects the inlet and outlet points of the crushing chamber. Replaceable backing plates protect the jaw-face support locations.

At the top of the jaw-holder, a guard protects the bearing housing.

A comprehensive range of jaw-face profiles are matched with the right manganese alloys to maximise crushing performance, jaw life and reduce operating costs.

Jaw-face retention

Jaws are retained with a wedge locking system, eliminating the need for access at front and rear of the crusher to tighten jaw-face bolts.

Wedge Locking System

8

Options available

• Automatic lubrication system for bearing and seals• Bearing temperature sensors• Drives• Flywheel and drive guards• Modular support base

Toggle

The toggle rolls across the flat pressure face of the toggle seat. There is no rubbing or scuffing and friction is kept to a minimum. This toggle system has the following advantages:

• No lubrication is required• The system can handle high crushing pressures• Increased life of the toggle and seats

Toggle

Toggle Seals

Machine robustness and rigidity

Terex® JW Series Single Toggle Jaw Crushers have been designed using our long experience in manufacturing machines to handle exceptionally heavy and continuous loads in the mining and quarrying industries. Heavy-duty self aligning double-row roller bearings in both the swing jaw and main frame, a heavy-duty alloy forged shaft, cast jaw-holder and a heavy-duty, bolted and dowelled main frame all work together to meet these demands.

JW Series Jaw Crusher Construction

DURABLE

9

Product Gradation

The curves shown give an indication of the likely product and are based on material of medium hardness with a Crushing Work Index of 16. Factors that markedly affect results are:

• Structure of material

• Compressive Strength or Crushing Work Index of material

• Grading of crusher feed

• Degree of pre-scalping

• Choke versus irregular or low rate of feed

We are pleased to examine specific applications and advise on the likely results from our machines.

Jaw Crusher Product Gradations

% P

assi

ng

100

90

80

70

60

50

40

30

20

10

0

Sieve Size (mm)

CSS

200

175

165

150

140

125

114

100

88

75

0 50 100 150 200 250 300 350

Footnote: These product curves are to be used as a guide only. Crusher product is dependant on feed material properties. Please consult Terex® Minerals Processing Systems for advice on product gradations for specific feed materials.

Product Gradations

10

JW Series Jaw Crusher Specifications

PRODUCTIVE

Machine specifications

JW40 JW42 JW55

Feed Openingmm 1000 x 625 1070 x 760 1400 x 760

inch 40 x 25 42 x 30 55 x 30

Max PowerkW 90 110 150

hp 120 150 200

PCD of Pulleymm 1190 8SPC 1390 10SPC 1645 10SPC

inch 46.85 57.4 64.8

Heaviest Liftkg 5525 8020 9700

lbs 12175 17670 21370

Total Weightkg 11820 17300 26070

lbs 26050 38130 57500

Max RPM 280 250 250

11

Model

Units

Approximate throughput in Metric Tonnes per hour and Short Tonnes per hour (1 metric tonne [Mtph]= 2204 lb and 1 short tonne [Stph] = 2000 lb)

Closed Side Setting (mm)

mm 50 63 75 88 100 115 125 140 150 165 175 200 225

inch 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7 8 9

JW40

Mtph85 -

95

105 -

120

125 -

145

150 -

165

170 -

190

200 -

220

220 -

240

250 -

275

260 -

290

285 -

325

Stph95 -

105

115 -

135140 - 160

165 -

185

190 -

215225 - 245

245 -

265

275 -

310

295 -

325

320 -

365

JW42

Mtph 135 - 160

165 -

185

190 -

210220 - 240

240 -

265

275 -

305

290 -

320

315 -

355

355 -

380

390 -

430

Stph 155 - 175

180 -

205

210 -

235245 - 270

270 -

295

305 -

340

325 -

360

355 -

400

375 -

425

435 -

480

JW55

Mtph230 -

255

265 -

295310 - 340

340 -

370

380 -

425

405 -

450

440 -

500

470 -

530

545 -

605

610 -

680

Stph255 -

290

295 -

330

345 - 380

380 -

410

430 -

475

455 -

500

495 -

560

525 -

595

610 -

675

685 -

760

CSS is measured tip to roof of corrugations.

Machine capacity

The JW Series of Single Toggle Jaw Crushers is designed with a tight crushing chamber nip angle and an aggressive crushing stroke to maximise productivity.

The accompanying table gives typical outputs for our range of machines, based on dry, free flowing material with a Crushing Work Index of 16 and a bulk density of 1600 kg/cu m (100 lbs/cu ft).

The table requires careful interpretation for particular materials and applications as machine capacity can be greatly affected by material properties and method of feeding.

JW Series Jaw Crusher Capacities

12

JW Series Jaw Crusher Dimensions

ROBUST

JW Series Jaw Crusher Dimensions

Model JW40 Model JW42 Model JW55

A 2295 2546 2679

B 1598 1656 2050

C 870 956 926

D 449 660 632

E 1076 1200 1372

F 699 728 925

G 133 100 177

H 1317 1707 1710

J 1315 1802 1665

K 770 791 1000

L 1759 1826 2276

M 1200 1200/1400 1650

13

Checklist for Purchasing a JW Series Jaw Crusher

Terex® JW Series Jaw Crushers Why it matters

Full hydraulic closed side setting adjustment. Fast, easy, safe adjustment.

Wedge jaw-face locking arrangement. Easy maintenance access and fast jaw-face change-out.

Tight crushing chamber nip angle. To aggressively grip rock for increased crusher throughout and jaw life.

Large crushing stroke. To maximise production.

Adaptable mounting arrangement. For mobile or static installations.

Extensive branch network providing spares and service support.

Greatly reduces downtime and lets you plan production confidently.

Process knowledge of technical staff. Expert help in integrating jaw crushers into your plant.

Proven in the field. A factor in your Duty of Care in selecting equipment.

14

PROVEN

JW Series Jaw Crusher Enquiry Details

15

When enquiring about the range of Terex® JW Series Jaw Crushers please supply the following details so that the jaw crusher best suited may be recommended (email or fax this form to your local Terex® Minerals Processing Systems office).

Type of material to be crushed

Bulk density of feed material Kg/cu. metre

Maximum feed lump dimensions mm x mm x mm

Characteristics of the material - hard, soft, slabby, moist or wet, sticky, contains clay or other deleterious materials

Required capacity in tonnes per hour Tonnes/Hour

Method of feeding to be adopted. e.g. apron feeder, vibrating grizzly feeder

Required product size mm

Effective Date: December 2013. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. All rights are reserved. Terex, the Terex Crown, Works For You and other marks are trademarks licensed or owned by Terex Corporation or its subsidiaries. © 2013 Terex Minerals Processing Systems.

Terex® Minerals Processing SystemsForm 25551 A4 (12/13)

www.terexmps.com

Give us a call to learn more about our extensive equipment range.

Latin and South America+1 (989) 288-3121

North America+1 (800) 248-3821

Terex® Minerals Processing SystemsEurope, Russia and Africa+44 (0) 28 82 418 790

Turkey, Middle Eastand North Africa+90 312 354 90 90

Australia+61 3 8551 9300

India+91 4344 302 000

Malaysia+60 3 5631 6199

Thailand+66 2 316 4656

JW Series Jaw CrushersHigh production

Aggressive crushing action

High strength design

Full hydraulic setting adjustment

Complete range of jaw profiles