TERAC
-
Upload
mogos-paul -
Category
Documents
-
view
214 -
download
0
description
Transcript of TERAC
-
Terac 25/40
The Terac 25/40 brings the cost, safety and environmental benefits of induction heating to ship-yards. A proven, turnkey solution, the Terac only needs an electricity supply and its ready to start work. Terac is ideal for deck and bulkhead straightening.
Increased productivityFast, easy, precise and repeatable heating improves productivity. Through-heating of steel decks and bulkheads is rapid, e.g., 8mm in only 8 seconds.
Reduced costsTerac has been documented to cut straightening times by as much as 80 per cent compared to flame heating and other traditional methods.
Improved qualityTerac ensures the precise repeatability of heating cycles. Pre-set parameters minimize
the risk of overheating
Gentle on the environmentNo flames, no gas and virtually no radiant heat mean more com-fortable, more productive working conditions. Thats good news for the natural environment, too.
-
Terac 25/40PRODUCT feaTURes
TeChnICal DaTa
www.efd-induction.com
supplySupply voltage rangeFrequencyPower factor (cos )Recommended fuseMains cable lengthOutputOutput power, nominal / intermittent Cooling & power cable lengthCoolingRefrigerant typeCoolant
3x400V 10% (460V)50Hz / (60Hz)0.9563 Amp5m
25/40kW30m
R407CMains water (with 30%monopropylenglycol when risk of freezing)
enclosureAmbient operating temp.Outer dimensions (WxDxH)Weight (with water)Capacitor unit / extension unitOuter dimensions (WxDxH)WeightDeck inductor unitWeightCable lengthhandheld inductor unitWeightCable length
+5C - +40C1965 x 1980 x 1925mmApprox. 1240kg
570 x 858 x 300mmApprox. 36kg (excl. cable)
Approx. 10kg (excl. cable)15m
Approx. 2kg (excl. cable)10m
Subject to modification
EFD - 100330 - 004/15-ENG
MobilityA complete Terac system fits in one standard sized container, making it easy to move from one work site to another.
Robust constructionTerac components are designed and built to last in tough shipyard environments.
easy operationClear, easy to understand operator controls are conveniently placed on the handle.
extensive work rangeOperators can work with Terac within a 45m radius of the base unit. An optional extension unit lengthens the work area to a 60m radius.
handheld transformerThe handheld transformer lets ope-rators heat bulkheads and hard-to-reach areas.