TENDER SCHEDULE RENOVATION OF VOF ......4 Brick bat Coba: After carrying out the water proofing...

1

TAKING RURAL INDIA >>FORWARD

TENDER SCHEDULE

Part 2. Price Bid

RENOVATION OF VOF & COMMUNITY HALL AT NABARD PARK, SANTACRUZ (WEST), MUMBAI - 54.

ARCHITECT & CONSULTANTS M/S SANDEEP GOVALKAR DESIGN ASSOCISTES

ARCHITECTS – INTERIOR – LANDSCAPE CONSULTANTS

A3/301-302, SHIVCHHAYA, GILBERT HILL ROAD, ANDHERI WEST, MUMBAI – 400 058.INDIA.

TLFX: - 022 – 2670 3158 CELL: 098211 73563/ 09969699169 E-MAIL – [email protected] / [email protected]

Pre-bid meeting: 11:00 AM on 16 October 2018

Last date for submission of Sealed Tender: 14.30 Hrs. (IST) on 24 October 2018

Opening of Technical Bids: 15.00 Hrs. (IST) on 24 October 2018

Chief General Manager, NATIONAL BANK FOR AGRICULTURE AND RURAL DEVELOPMENT,

DEPARTMENT OF PREMISES, SECURITY & PROCUREMENT, GROUND FLOOR, B.K.C BANDRA (E), MUMBAI-400 051.

mailto:govalkarsgda@

mailto:[email protected]

BILL OF QUANTITIES - Renovation of VOF and CH at NABARD Park, Santacruz(W), Mumbai

Part A - Civil & Furniture

Sr. Particulars Qty. Unit Rate Amount (Rs.)

A DISMANTLING & DEMOLITION

NOTE : CONTRACTOR SHALL VISIT THE SITE FOR INSPECTION BEFORE

QUOTE.

1 Dismantling 150mm thick brick / siporex wall carefully by using chisel to cut & making

good wall edges with removal of existing cement plaster including removal of debris

from site.

L.S.

2 Dismantling marble,granite,kota,marble mosaic, ceramic tile or other flooring & skirting

etc upto bare rcc slab (including cleaning of existing cement morter & concrete/brick bat

coba waterproofing) in a manner which facilitate laying of new flooring without undue

extra expense.the rate shall include removal of debris from site.

L.S.

3 Dismantling marble,granite,kota,marble mosaic, ceramic tile or other tile dado etc.with

the existing backing plaster in a manner which facilitate fixing of new dado without

undue extra expense.the rate shall include removal of debris from site.

L.S.

4 Dismantling kitchen/pantry platform & wash basin counters of marble,granite or other

materials etc.wherever required in a manner which facilitate fixing of new dado without

undue extra expense.the rate shall include removal of debris from site.

L.S.

5 Dismantling existing doors/windows/m.s grillwork, electrical cables / fittings, existing

plumbing fittings, pipes, m.s.jali, ci pipes & aquaguard & insectocutors fittings, mirrors,

towel rods, soap dispensers, all fixed furnitures such as partitions etc. all existing

unused lines for waste water etc. to be removed,the rate shall include all incidental

work, cutting & making good walls & floors etc.complete. as directed by architect/project-

in-charge (contractor shall visit the site for inspection before quote). the rate shall

include removal of debris from site.

L.S.

TOTAL (A)

B CIVIL WORKS

1 Providing and constructing 100mm thick Siporex masonry wall with cement mortar 1:4

(1 Cement : 4 coarse sand) in superstructure at Ground floor including 150 mm thick

RCC lintel beam in M20 on openings as per site requirement with necessary scaffolding,

curing etc. complete as directed.

250.00 SMT

2 Providing & laying half brick masonary work (6") in cement morter 1:4 (1 cement : 4

course sand) inclu.curing all complete in super structure above plinth level as directed.

63.00 SMT

3 Providing and applying cement sand plaster in CM 1:4 (1 cement : 4 sand), about 20

mm thickness in 02 coats with integral waterproofing compound as approved at all levels

in patches on the new surface , curing of new plaster, scaffolding, etc. complete as

directed.

703.00 SMT

4 Brick bat Coba: After carrying out the water proofing plaster, the entire sunken portion

shall then be filled with brick bat coba in cement mortar (1 cement: 3 mortar) mixed with

water proofing compound as per manufacturer's specifications to the required depth with

proper process complete as directed. Care should be taken to observe the levels so as

to accommodate the offset in the floor level, if any.

35 SMT

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

Page 1 of 14


5 Supplying and applying 2 coats of membrane waterproofing layer over brick bat coba

concrete surface ,above pcc beading and allround the wall upto 600mm height from the

concrete floor using pidilite make pidifin 2k or equivalent of fosroc make as per

manufacturing specifications before laying floor tiles including repairing of brick bat

coba concrete surface wherever necessary using 1:4:8 mix(1 cement, 4 sand and 8

brick bats) upto 150mm thick with integral water proofing compound of pidilite/fosroc

make including costs of all materials,equipments, labour charges, curing etc. complete

with 5 years guarantee.

47.00 SMT

6 Providing & fixing in position the 20 mm thk. approved coloured granite jamb in two

levels of 300 mm wide for windows in 1:4 cement morter & complete the same with

edge polishing. (basic rate of granite slab =rs.1500 per

sm.) .

190 RMT

7 Providing & laying platform of 675-750 mm depth(clear) and at 700mm to 800 mm

ht(top)above ffl. of approved 20 mm thk granite slab laid on 20 mm thk white marble

support with required cement morter base & 40 mm thk champhered and machine

polished edge facia.it shall be supported on side walls & white marble vertical supports

as shown in the drg.rate shall include the profile cutting and fixing of undercounter

s.s.sink and polishing the exposed edges of granite. 100 mm high granite facia shall be

provided below the chamfered edge.(basic granite rate=rs 1500 per sm) for kitchen /

wash basin area. The granite slab, skirting, facie pattie etc all shall be measured in Sqm

only, no deduction in area for cutting in granite for SS sink. The rate quoted shall be

inclusive of cost towards moulding/edge champharing etc of granite as directed by

Bank's Engineer/Architect. Note: The cost of marble shall be paid seperately under item

No.8.

9 Sqm

8 Providing & fixing in position the 20 mm thk. approved coloured white marble for

vertical/horizontal support of kitchen granite platform and for shelf for inside full ht.

storage with 1:4 cement morter & complete the same with edge polishing. (basic rate of

marble-rs.75 per sft.) .

32 SMT

TOTAL (B)

C FLOOR / SKIRTING/ WALL DADO FINISHES

1 Providing & fixing 600x600 mm vitrified floor tiles in 1:4 cement morter bedding of

average 25 mm thk.in proper line and level.rate shall be inclusive of providing and laying

necessary backing material and grout joint filling bal compound of the same shade of the

tiles. (basic cost of tile: 750/- sq.mt) (Area - All area) (Make: Kajaria / Jhonson)

246 SMT

2 Providing & laying 100mm high skirting /riser with 600mm x 600mm vitrified tile of

approved shade and make in cm 1:4 in proper line & level.the skirting should be flushed

with level of p.o.p.punning on wall with 6 mm groove .rate shall be inclusive of providing

and laying necessary cement / mortar backing material and joint filling compound (bal)

of the same shade of the tiles. (basic cost rs.750/ sq.mt). (Area - Living cum dining area,

suite room, suite bedroom, guest bedroom, staff rest room, doctor room, kitchen, Living

cum dining area, guest bedroom 2, guest bedroom 3, guest bedroom 4) (Make: Kajaria

/ Jhonson)

285 RMT

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

Page 2 of 14


3 Providing & fixing antiskid ceramic floor tile(300x300) of approved colour in 1:4 cement

morter bedding of average 25 mm thk.in proper line and level.rate shall be inclusive of

providing and laying necessary backing material inclu.2 coat waterproofing after

exposing the bare slab(1st coat) and above pcc/brickbat coba ( 2nd coat) before fixing

the floor tile and grout joint filling compound of the same shade of the tiles. (basic cost

Rs.500 per smt) (Area - All toilets) (Make: Kajaria / Jhonson)

35 SMT

4 Providing & fixing approved matching floor antiskid ceramic tile skirting (with slope from

4" to 6") of approved colour .Rate shall be inclusive of providing and laying necessary

backing cement / mortar material. The rate includes costs of all materials, equipments,

labour charges, curing rubbing, washing, cleaning the surface etc. Complete as per

instructions of banks engineer / architect. (basic cost rRs. 500 per smt). (Make: Kajaria

/ Jhonson)

72 RMT

5 Providing & fixing 300mm x 600mm of approved shade and quality for ceramic tile dado

as per approved pattern from ffl and in cm 1:4 in proper line & level as directed by the

architect as shown in drawings. Rate shall be inclusive of necessary backing material,

wall plaster waterproofing and joint filling compound(bal) of the same shade of the

ceramic tiles for kitchen, toilet.(basic cost Rs.650/ sq.mt). (Area - Suite room toilet ,

guest bedroom 1 toilet, guest bedroom 2 toilet, guest bedroom 3 toilet, guest bedroom 4

toilet, kitchen) (Make: Kajaria / Jhonson)

147 SMT

6 Highlighter tiles - supplying and fixing digital printed ceramic glazed highlighter tile

300mm x 600mm(300mm) x 10mm in design to walls in required position using cement

and tile adhessive (diamond star of Bal Endura make or equivalent) mixture grout of

average 10mm thick in the ratio 0.5:1 in proper line and level and filling the joints with

roff/balendura make joint filling compound of the same shade of the tiles. The rate

includes costs of all materials, equipments, labour charges, curing, rubbing, washing,

cleaning the site etc. Complete as per instructions of banks engineer / architect. (Basic

cost of highlighter tile rs.75/- per sft) (make:h&r johnson/kajaria/rak). (Area -

Suite room toilet , guest bedroom 1 toilet, guest bedroom 2 toilet, guest bedroom 3

toilet, guest bedroom 4 toilet) (Make: Kajaria / Jhonson)

25 SMT

7 Providing & fixing 600x600 mm of approved shade and quality for vitrified floor tile as

per pattern indicated in drawing and in 1:4 cement morter bedding of average 25 mm

thk.in proper line and level.rate shall be inclusive of providing and laying necessary

backing material and grout joint filling bal compound of the same shade of the tiles.

(basic cost of tile: 750/ sq.mt) (Area - Community hall) (Make: Kajaria / Jhonson)

41 SMT

8 Providing & laying 600x600 mm of approved shade and quality for vitrified 100mm high

skirting /riser as per pattern indicated in drawing of approved shade and make in cm 1:4

in proper line & level.the skirting should be flushed with level of p.o.p.punning on wall

with 6 mm groove .rate shall be inclusive of providing and laying necessary cement /

mortar backing material and joint filling compound (bal) of the same shade of the tiles.

(basic cost rs.750/ sq.mt). (Area - Community hall) (Make: Kajaria / Jhonson)

135 RMT

9 Providing & fixing 600mm x 600mm of approved shade and quality for vitrified tile dado

as per pattern indicated in drawing from ffl and in cm 1:4 in proper line & level as

directed by the architect as shown in drawings. Rate shall be inclusive of necessary

backing material, wall plaster and joint filling compound (bal grout) of the same shade of

the vitrified tiles for community hall. (basic cost rs.750/ sq.mt). (Area - community hall)

(Make: Kajaria / Jhonson)

49 SMT

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

Page 3 of 14


10 Supplying and fixing 18mm thick machine mirror polished granite slab of approved

colour and approved texture in 1:4 cement mortar bedding of average 25 mm thick in

proper line and level including cement slurry with required slope for flooring and filling

the joints with roff/balendura make joint filling compound of the same shade of the

granite. The rate includes costs of all materials, equipments, labour charges, curing,

rubbing, washing, cleaning the surface etc. Complete as per instructions of banks

engineer / architect. Etc. Complete as per design pattern.

(Basic cost of polished granite slab rs.1800/- per smt). (Area - lift lobby, staircase area)

18 SMT

11 Supplying and fixing 18mm thick machine mirror polished granite skirting having

approximate width of 150mm of approved colour and texture using cement and tile

adhessive(diamond star of balendura make or equivalent) mixture grout of average

12mm thick in the ratio 0.5:1 in proper line and level and filling the joints with

roff/balendura make joint filling compound of the same shade of the granite. The edges

of skirting shall be shamphered/moulded and polished. The rate includes costs of all

materials,equipments, labour charges, curing rubbing, washing, cleaning the surface

etc. Complete as per instructions of banks engineer / architect.

(Basic cost of polished granite slab rs.1800/- per smt). (Area - Lift lobby,staircase

areal)

15 RMT

12 Supplying and fixing 18mm thick machine mirror polished granite slab of approved

colour and approved texture in 1:4 cement mortar (1 cement and 4 sand) bedding of

average 25 mm thick in proper line and level including cement slurry with required slope

for wall cladding and filling the joints with roff/bal-endura make polymer joint filling

compound of the same shade of the granite. The rate includes costs of all materials,

equipments, labour charges, curing, rubbing, washing, and cleaning the surface etc.

Complete as per instructions of banks engineer / architect. Etc. Complete. (Basic cost of

polished granite slab rs.1800/- per smt) (Area - Lift lobby,staircase areal)

5 SMT

TOTAL (C)

D PAINTING WORKS

This work includes removing existing paint finishes & filling the dents with approved filler

putty gypsum /or approved crack filler,binder,cleaning and making the surface dust

free,preparing surfaces, applying a sealer or primimng coat as per the manufacturer's

specifications,applying two under coats and one finished coat of paint to achieve the

required finish as per the specifications etc.complete.

1 Providing and applying new 3 coats of luxury acrylic emulsion paints asian/ici/nerolac

make of aproved shade to surface as per manufacturer's specifications & including

staging or scaffolding ,preparing the surface with one coat of primer on walls ,columns &

ceiling etc.final coat should be finish with roller and complete as specified & directed.

877.00 SMT

2 Providing and applying 3 coats of luxury designers paints / washable wallpaper (iokos /

royale play make) of aproved shade to surface as per manufacturer's specifications &

including staging or scaffolding, preparing the surface with one coat of primer on walls &

ceiling etc. as specified & directed. (basic cost rs.800/ sq.mt)

3 SMT

3 Providing and applying 3 coats of luster paint asian/ici/nerolac of aproved shade/make

to surface as per manufacturer's specifications & including staging or scaffolding,

preparing the surface with one coat of primer on ceiling etc. final coat should be finish

with roller and complete as specified & directed.

565.00 SMT

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

Page 4 of 14


TOTAL(D)

E CEILING & POP PUNNING

1 Providing and fixing gypsum board false ceilings made up of g.i. frames as specified by

manufacturer and 12mm thick gypsum board with suitable suspenders fixed to the

ceiling. ceiling section, perimeter channel, suspenders etc. shall be standard sections

supplied by manufacturer.spacing of intermediate channels shall be at 1200 c/c and

ceiling section at 457 mm c/c. the work includs finishing of joints, necessary offsets,

applying primer, two or more coats of plastic emulsion paints, making cutout for light

fixtures, a. c. grills, diffusers etc., providing of perimeter channels/teak beading etc.

complete.

565 SMT

2 Supplying and fixing suspended 12 mm thick gypsum board band of width not more than

6" for coffered false ceiling and indirect lighting, which includes providing and fixing g.i.

perimeter channels of size 0.55mm thick having one flange of 20mm and another flange

of 30mm & a web of 27mm along the perimeter with ceiling screws fixed to brick wall /

partition with the help of nylon sleeves & screws at 600 mm c/c, then suspending g.i.

intermediate channels of size 45mm x 0.9mm thick with 2 flanges of 15mm each from

the soffit with g.i. and steel expansion fasteners ony, "fasteners" shall be used for ceiling

supports ony. Ceiling section of 0.55mm thickness having knurled verb of 51.5mm and

two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate

channel with the help of connecting clips and in direction perpendicular to the

intermediate channel at 457 mm c/c. 12.5 tapered edge gypboard (conforming to is-2095-

1982) is then screws fixed to ceiling to ceiling section with 25mm drywait at 230 mm c/c.

Additional supports for ac grill shall be fixed as per instructions and ac plan / section /

layout. *screw fixing is done mechanically with screw driver of drilling machine with

suitable attathcment. The boards are to be jointed and finished so as to have a flush

look, which includes filling and finishing the tapered and square edges of the boards with

jointing compoind, paper tape. The rate includes costs of all materials,equipments,

labour charges, curing, rubbing, cleaning the site etc. Complete as per instructions of

banks engineer / architect.

Note:- For light fittings, grills diffusers and cutouts, speakers, fire detectors etc. Have to

be made with the frame of perimeter channels of size 20 x 27 x 30mm x 0.54 mm thick,

supported suitable as per direction of bank's engineer / architect / electrical & ac

consultants. No additional payment will be made for this work.

120 SMT

3 Providing and applying p.o.p. punning on walls & columns (avg.12 mm thk).the rate shall

include scrapping,levelling and preparing the surface.the rate shall be inclusive of all

types of grooves above the skirting,around the window and door frames as directed.

672 SMT 225 1,51,200.00

4 Gypsum plaster decorative fluted columns with the top of capital & horizontal façade. As

/ details & 3D attached.

a) Fluted column as per design. 20 SMT

b) horizontal rectangular façade with the cornice / capital details etc. 7 SMT

TOTAL(E)

F MISCELLANEOUS ITEMS

1 Providing & laying in place synthetic door mats as per approved sample of size 900mm

x 450mm

15 NOS

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

Page 5 of 14


2 Providing pest control and anti-termite treatment by appointing a specialised agency,

such as PCI as per the specifications mentioned by the bureau of indian standards and

agencies specifications (whichever is higher),for general

civil,plumbing,drainage,timber/carpentry works & gypsum related works, including a 02-

years guarantee under suitable undertaking on stamp paper etc.complete as directed.

(Mode of measurement to be on carpet -area of floor & not the area of surface treated)

355 SMT

3 Providing & fixing of signages for various sizes and shapes using brushed stainless

steel of min.18 guage thk brush steel finish inclu.engraving/etching of letters of reqd

sizes filled with colours as per design & to be fixed with ss screws on wall / doors.

a) Bedroom door /kitchen /toilet/guest room door (Approx size 300 x 150) 18 NOS

4 Grado electronic safe Make: Godrej or approved equivalent. Basic cost of electronic

safe: Rs.7350/-

8 NOS

TOTAL(F)

G CARPENTARY WORKS

NOTE: Refer attached descriptions & specifications of all loose furnitures all in 1.0 mm

thk core laminate finish.

1 Providing and fixing concealed in ceiling pelmet of size 150mm deep x 175mm wide with

vertcals made of 19mm thk commercial ply finished with approved laminate /colour

along the walls with necessary wooden support, t.w.edge putty & hardwares etc.

60 RMT

2 Providing & fixing kitchen shutters/ full ht. storage in 25 mm thk marine grade board

finished in approved shade 1mm thk laminate on exposed surface and internal surface

(white laminate) finished with match polished edge lipping with framework in 50 x 35

mm teakwood sections duly matching french polished & complete as directed by

architect.

3 SMT

3 Providing and making sofa of overall sizes as mentioned in the drg.with back and

armrests.the sofa will consist of c.p.teakwood frame.seat base provided with flat springs

and fully covered with cloth from bottom as well as seattop & backrest.the seat and back

frame work will be faced with 100mm thk.approved high density polyurethenefoam

internally and 4mm thk ply from outer side and covered with approved upholstery .a

25mm thk wooden member as shown in the drg.shall be provided and polished in

melamine.rates inclusive of all accessories and scotch guard treatment for upholstery.

(basic cost of fabric rs.600/ rmt)

a) Three seater sofa (1930mm wide x 740mm depth x 790mm height) 2 NOS

b) Two seater sofa (1330mm wide x 740mm depth x 790mm height) 1 NOS

4 DOUBLE BEDS FOR SERVENT (SIZE - 5'-0" X 6'-7" X 1'-6"HT) WITH 4"

MATTRESS/HEADBOARD WITH 12 MM THK BWR PLY BACKING

2 NOS

DOUBLE BEDS WITH HEADBOARD WITH 12MM THK PLY BACKING & 1MM THK

LAMINATE FINISH WITH 2 "X 1" T.W.EDGE FRAME FINISHED WITH MATT

MELAMINE POLISH AS PER DETAIL & SPECIFICATIONS ATTACHED. AS PER

APPROVED DESIGN OF ARCHITECT.

5 Single bed for servent (size - 3'-0" x 6'-7" x 1'-6"ht) with 4" mattress/headboard

with 12 mm thk bwr ply backing

1 NOS

SINGLE BED WITH HEADBOARD WITH 12MM THK PLY BACKING & 1MM THK


MELAMINE POLISH AS PER DETAIL & SPECIFICATIONS ATTACHED. AS PER

APPROVED DESIGN OF ARCHITECT.

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

Page 6 of 14


6 Double beds (size - 5'-6" x 6'-0" x 1'-6"ht) with 5" mattress/headboard with 12mm

thk bwr ply backing

8 NOS

DOUBLE BEDS WITH H HEADBOARD WITH 12MM THK PLY BACKING & 1MM THK


MELAMINE POLISH AS PER DETAIL,DESIGN & SPECIFICATIONS ATTACHED. AS

PER APPROVED DESIGN OF ARCHITECT.

7 BED SIDE TABLE (Approx 1'-6" x 1'-6") 16 NOS

PROVIDING AND FIXING BED SIDE TABLE, TABLE MADE OUT OF 18MM THK PLY

WITH 1 MM THK APPROVED LAMINATE FINISH TOP AND VERTICAL IF

NECESSARY. THE SIDE TABLE IS TO BE 1 1/2"THK WITH PROPER TEAK WOOD

EDGE MOULDING WITH MATT MELAMINE POLISH MATCHING TO LAMINATE.

THE TABLE TO HAVE A DRAWER OF APPROX 4"IN HEIGHT. WITH PROPER

TELESCOPIC DRAWER CHANELS,DRAWER LOCK AND OTHER HARDWARE

FITTINGS. ALL EXPOSED SURFACE TO HAVE LAMINATE FINISH AND POLISH

MATCHING TO THE LAMINATE AND ALL INSIDE SURFACES TO HAVE 0.8 MM

THK LAMINATEAS PER THE APPROVAL OF THE ARCHITECT.

8 centre table (size - 3'-0" x 2'-0") 1 NOS

CENTRE TABLE IN WOOD FINISH LEGS WITH MATT MELAMINE POLISH AND 10

MM THK GLASS TOP WITH BEVELED EDGE.AS PER DETAILS & DESIGN GIVEN

BY ARCHITECT.

9 Coffee table (size - dia 2'-0") 1 NOS

CIRCULAR DINING TABLE WITH 18 MM THK APPROVED CORE LAMINATE

FINISH TABLE TOP, BOTTOM & TOP FRAME IN TEAK WOOD, AS PER DETAIL

DRAWING. AS PER INSTRUCTIONS OF ARCHITECT.

10 Dining table (six seaters) (size - 6'-0" x 3'-0") 1 NOS

PROVIDING & ARANGING IN POSITION DINING TABLE IS MADE OUT OF 25 MM

THK MARINE PLY FOR TOP,12 MM FOR BOTTOM,SIDES, BACK. ALL EXPOSED

SURFACES TO BE FINISHED WITH COMBINATION OF 1.5MM THK COMBINATION

OF GROUP MATCHING DECORATIVE LAMINATE OF APPROVED TYPE.

EXPOSED WOODEN SURFACES WITH MELAMINE FINISH & ALL INTERNAL

SURFACES OF THE PLY FINISHED WITH 2 COATS OF FRENCH POLISH. ITEM TO

BE COMPLETED AS PER DRG,SPECIFICATIONS & SITE DIRECTIONS.ITEM TO

INCLUDE ALL TYPES OF HARDWARES, SCREWS,HINGES,LOCKS,SS

HANDLES,TOWER BOLTS,BALL CATCHES,WOODEN LIPPING, BEDDING, INLAY

PATTI & MOULDING ETC.

11 Dining chairs 6 NOS

ARMED CHAIR WITH CUSION SEAT AND BACK MADE OF TEAK WOOD WITH

APPROVD FABRIC AND FRAME IN WELL SEASONED C.P TEAKWOOD FRAME OF

SIZE 2"X1.5" WITH 3 COATS OF MELAMINE POLISH AS PER DETAIL AND

DESIGN.

12 coffee table chair 2 NOS

AS PER APPROVED DESIGN & INSTRUCTIONS OF ARCHITECT.

13 Sofa side corner table with t.wood and melamine polish . 4 NOS

SIDE TABLE /CORNER TABLE APPROVED GRANITE TOP MADE OUT OF TEAK

WOOD, 18 MM THK MARIN PLY WITH 1 MM THK CORE LAMINATE FINISH OF

APPROVED SHADE & MAKE. AS PER APPROVED DESIGN & INSTRUCTIONS OF

ARCHITECT.

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

Page 7 of 14


14 PROVIDING & FIXING IN POSITION 35 MM THK SOLID CORE APPROVED BRAND

FLUSH DOOR FINISHED WITH 4 MM THK. APPROVED SF LAMINATE FROM

BOTHSIDE INCLUDING 4"WIDE JAMB LINING FOR EXISTING DOOR FRAMES

WITH 12 MM THK BWR PLY FINISHED WITH THE APPROVED SF LAMINATE,

MELAMINE POLISHED EDGE BEADING, AND INCLUSIVE OF HEAVY DUTY BRASS

HINGES OF 100 X 25MM ALONG WITH APPROVED MAKE CYLINDRICAL LOCK

/MORTISE LOCK FOR MAIN DOOR AND T.W.BIDING WHEREVER REQUIRED FOR

THE INTERNAL DOOR SHUTTER AND COMPLETE ALL AS PER DRG.,DETAILS

AND AS DIRECTED. COMPLETE.

a) Door (3'-0" X 7'-0") 16 NOS

b) Door (3'-6" X 7'-0") 2 NOS

c) Door (4'-0" X 7'-0") 1 NOS

d) Toilet door (2'-6" x 7'-0") 11 NOS

15 STUDY CUM DRESSING TABLE

PROVIDING & FIXING IN POSITION STUDY CUM DRESSING TABLE IS MADE OUT

OF 19 MM THK MIRROR POLISH GRANITE FOR TOP,BOTTOM,SIDES, BACK & 12

MM THK COMM.PLY FOR SHELF. ALL EXPOSED SURFACES TO BE FINISHED

WITH COMBINATION OF 1MM THK LAMINATE & ALL INTERNAL SURFACES OF

THE PLY FINISHED WITH 2 COATS OF FRENCH POLISH. ITEM TO BE

COMPLETED AS PER DRG & SITE DIRECTIONS.ITEM TO INCLUDE ALL TYPES

OF HARDWARES, SCREWS,HINGES,LOCKS,SS HANDLES,TOWER BOLTS,BALL

CATCHES,WOODEN LIPPING, BEDDING, INLAY PATTI & MOULDING ETC. ALL

EXTERNAL EXPOSED WOODWORK TO BE FINISHED IN MELAMINE POLISH.ALL

DRAWERS TO HAVE TELESCOPIC SLIDING DRAWER FITTINGS. DRAWER UNIT

SHALL BE WITH 12 MM THK COMM.PLY FOR FRONT & SIDES AND 6 MM THK

COMM.PLY FOR BACK & BOTTOM.THIS ALSO INCLUDES 6MM THK.MIRROR OF

APPROVED MAKE INCLU.9MM THK MARINE PLY BACKING WITH NEESSARY

WOODEN FRAME WORK ON WALL TO GET THE SURFACE IN PLUMB,LINE &

LEVEL.THE EXPOSED WOODEN MEMBERS TO BE MELAMINE POLISH ETC.ALL

COMPLETE.

a) 2'-6" X 2'-0" X 2'-6"HT 3 NOS

b) 3'-2" X 2'-0" X 2'-6"HT 3 NOS

c) 2'-3" X 2'-0" X 2'-6"HT 3 NOS

16 STUDY TABLE CHAIR 9 NOS

MEDIUM BACK CHAIR / REVOLVING / GAS HEIGHT ADJUSTMENT /PERMANENT

CONTACT MECHANISM / PP FIXED ARMS / NYLON BASE WITH TWIN WHEEL

CASTORS.UPHOLSTERY - FABRIC (BASIC COST RS.250/-) 37" HT OF THE

CHAIR, SEAT SIZE 19" X 19" BACK SIZE 19"X 17". ERGONOMICALLY DESIGN.

17 Mirror frames in wash basin areas :providing & fixing in position 6 mm thk 25mm

bevelled edge clear mirror fixed with 9 mm thk marine ply backing with s.s. studs and

complete all as per drg., details and as directed.

7 SMT

18 WARDROBE

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

Page 8 of 14


Providing & fixing 550mm deep 1800mm ht.wardrobe unit as per drg.and details.the

storage unit should be made out of 18mm thk. marine ply for top, sides and base, 6mm

thk.marine ply back, 25mm thk block board (marine) shutters with autoclosing hinges

and t.w.lipping matching with approved laminate on all the edges. All external surfaces

to be finished in 1mm thk laminate (suede finish) of approved make division of shutters

(aprox.450 mm) shall be made equally according to the length of the storage, and

complete. Rates shall be inclusive of all necessary approved fittings like auto closing

hinges, locks,concealed handles, telescopic drawer chanels, tower bolts and any

miscellaneous hardware items as per engineer-incharge / architect's instructions.

25 SMT

Note :- (All loose furniture will have 1mm thk core laminate on top & side beeding &

other surface will be use 1mm thk SF laminate finish).

19 LUGGAGE RACK (APPROX. 3'-0" X 2'-0") 5 SMT

P/F IN POSITION LUGGAGE RACK IS MADE OUT OF 19 MM THK COMMERCIAL

PLY FOR TOP,BOTTOM,SIDES, BACK. ALL EXPOSED SURFACES TO BE

FINISHED WITH COMBINATION OF 1MM THK LAMINATE & ALL INTERNAL

SURFACES OF THE PLY FINISHED WITH 2 COATS OF FRENCH POLISH. ITEM TO

BE COMPLETED AS PER DRG & SITE DIRECTIONS.ITEM TO INCLUDE ALL

TYPES OF HARDWARES, SCREWS, SS HANDLES,TOWER BOLTS,BALL

CATCHES, WOODEN LIPPING,BEDDING,INLAY PATTI & MOULDING ETC. (REFER

DETAIL DRAWINGS)

20 FULL HT. STORAGE 20 SMT

PROVIDING AND FIXING 16" DEEP STORAGE UNITS OF DIFFERENT HEIGHTS

OUT OF 19 MM TH. MARINE PLY SIDES AND SHELVES AND SHUTTERS AND 6 M

TH. MARINE PLY BACKING AS PER DETAIL DRAWING. ALL SHUTTERS TO BE

FIXED WITH 3 NO. 4" X 3/4" BRASS HINGES, BRUSH FINISHED S. S. HANDLES

AND LOCKING ARRANGEMENT. ALL EXPOSED & INSIDE SURFACES TO BE

FINISHED WITH 1.0 MM THK FINISH APPROVED LAMINATE.

21 PANELLING ON WALLS / COLUMNS WITH LAMINATE FINISH 20 SMT

PROVIDING NEW PANELLING, PROVIDING AND FIXING 1MM THK APPROVED

LAMINATE FINISH PANELLING FOR WALLS, COLUMNS ETC. MADE OUT OF 2" X

1" C.P.T. WOOD FRAME WORK AT EVERY 1'-6" C/C (HORIZONTAL & VERTICAL)

COVERED WITH 6MM THICK MARINE PLY ALONG WITH 4" WIDE SKIRTING TO

MATCH PARTITION. SKIRTING FINISH WITH 1.0 MM THK LAMINATE. THE TOP

EDGE TO BE FINISHED WITH 12MM THK T.W. BEADING WITH 3 COATS OF

SMOOTH SILK MELAMINE POLISH. COMPLETE. ALL THE EXPOSED SURFACES

OF THE PANELLING SHALL BE FINISH WITH APPROVED MAKE/COLOR 1.00MM

THICK LAMINATE WITH VERTICAL / HORIZONTAL GRAINS ETC. COMPLETE AS

PER DESIGN & DIRECTED BY ARCHITECT.

22 TYPICAL TV UNIT PANELLING APPROX (1.30 X 1.30) 10 NOS

PROVIDING AND FIXING TV UNIT PANELLING WITH 3 " DEPTH ON WALL

LAMINATE FINISH PANELLING FOR WALLS, COLOUMN, MADE OUT OF 2" X 1"

C.P.T. WOOD FRAME WORK AT EVERY 1-6" C/C (HORIZONTAL & VERTICAL)

COVERRED WITH 6MM THICK MARINE PLY ALONG WITH 1.3 METER HT. OR

MORE, CUTOUT IN PANELLING AS PER TV SIZE FOR SHUTTER ON 3 NOS.

4"X3/4" BRASS HINGES, 12 MM THK BACKING ON WALL, COMPLETE AS PER

DESIGN & DIRECTED BY ARCHITECT.

23 ALUMINIUM SLIDING GLAZED WINDOW 50 SMT

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

Page 9 of 14


REMOVING OLD EXISTING AND PROVIDING DOUBLE GLAZED HERMETICALLY

SEALED GLAZING IN ALUMINIUM WINDOWS, VENTILATORS , & PARTITION ETC.

WITH 6MM THK CLEAR FLOAT GLASS BOTH SIDE, HAVING 12MM AIR GAP ,

INCLUDING PROVIDING EPDM GASKET, PERFORATED ALUMINIUM SPACERS,

DESSICANTS, SEALANT (BOTH PRIMARY& SECONDARY SEALANT) ETC.AS PER

SPECIFICATIONS, DRAWINGS AND DIRECTION OF ENGINEER - IN CHARGE

COMPLETE.

24 LOUVER WINDOW 6 SMT

SUPPLYING AND FIXING 16 GUAGE ALUMINIUM POWDER COATED (

MINIMUM 50MICRON POWDER COATING) VENTILLATOR FRAME OF SIZE

50MMX25MM WITH ADJUSTABLE ALUMINIUM 100 MM SIZE LOUVERS AND

PROVIDED WITH WITH 100MM WIDE AND 5MM THICK PINNED GLASS.

EXTERNAL FACE OF VENTILLATOR SHALL BE COVERED WITH GI RAT MESH

FIXED IN 25MMX12 MM, 16GUAGE ALUMNIUM POWDER COATED FRAME

WITH F CHANNEL AND TO BE FIXED ON THE WALL. THE RATE INCLUDING

COSTS OF ALL MATERIALS INCLUDING NON CORROSSIVE FASTNERS, LABOUR

CHARGES, SCAFFOLDING, CLEANING ETC. COMPLETE

25 PRE-FABRICATED FACTORY MADE MODULAR KITCHEN UNITS BELOW

PROPOSED KITCHEN PLATFORM/COUNTER ( APPROXIMATELY 750 MM IN

HEIGHT AND 700 MM IN DEPTH) AS PER THE FOLLOWING SPECIFICATIONS

AND ENCLOSED SKETCH.

THE FRAME WORK OF THE CABINETS INCLUDING DRAWER FASCIA/

SIDES/BOTTOM, SHELVES ETC. SHALL BE MADE OUT OF 16 MM THICK

MARINE PLYWOOD ( WESTERN INDIA PLYWOOD, OR APPROVED EQUIVALENT

MAKE).

SHUTTERS SHALL BE MADE OUT OF 16 MM THICK MARINE PLYWOOD (

WESTERN INDIA PLYWOOD, OR APPROVED EQUIVALENT MAKE). EACH

SHUTTER SHALL BE FIXED TO THE FRAMEWORK USING TWO NUMBERS OF

BEST QUALITY EURO TYPE SLIP/AUTO HINGES (EBCO, HETTICH, HAFELE OR

APPROVED EQUIVALENT MAKE) AND PROVIDED WITH ONE APPROVED

QUALITY AND PROFILE BRUSH FINISHED STAINLESS STEEL (SS) HANDLE OF

GRADE 304 (MINIMUM 150 MM LONG)

EACH DRAWER FASCIA SHALL BE MADE OUT OF 16 MM THICK MARINE

PLYWOOD (WESTERN INDIA PLYWOOD, OR APPROVED EQUIVALENT MAKE)

AND APPROVED QUALITY AND MAKE SS 304 GRADE BASKETS / ACCESSORIES

(HETTICH, EBCO, HAFELE OR APPROVED EQUIVALENT MAKE) SHALL BE

MOUNTED ON APPROVED QUALITY, HIGH PRECISION TELESCOPIC

CHANNELS/SLIDES (EBCO, HETTICH, HAFELE OR APPROVED EQUIVALENT

MAKE) TO BE DESIGNED AS PER DRAWER SIZE AND TO MEET THE WEIGHT

REQUIREMENT WITH MINIMUM LENGTH OF 500 MM TO ENSURE SMOOTH

MOVEMENTS OF DRAWER WITH /WITHOUT CONTENT WEIGHTS AND

PROVIDED WITH APPROVED QUALITY 150MM SIZE SS HANDLES OF GRADE

304. THE TELESCOPIC CHANNEL RAILS MAY BE PROVIDED

AS PER SPECIFICATIONS. IN EACH KITCHEN THERE SHOULD BE A MINIMUM

OF 1NO. PERFORATED CUTLERY BASKET(4” SIZE), 1 NO. CUP & SAUCER

4 SMT

RATE IN WORD:

RATE IN WORD:

Page 10 of 14


26 SUPPLYING OF OVER HEAD KITCHEN CABINET UNITS OF 600 MM & 300MM IN

HIGHT AND 300 MM IN DEPTH AS PER THE FOLLOWING SPECIFICATIONS AND

ENCLOSED SKETCH. THE FRAME WORK OR CARCASS OF THE CABINETS, ITS

SIDES/BOTTOM, SHELVES ETC. SHALL BE MADE OUT OF 16 MM THICK

MARINE PLYWOOD APPROVED EQUIVALENT MAKE). GLAZED SHUTTERS OF

CABINETS AS PER THE DRAWING SHALL BE MADE OUT OF 16 MM THICK

MARINE PLYWOOD (APPROVED EQUIVALENT MAKE). EACH SHUTTER SHALL

BE FIXED TO THE FRAMEWORK /CARCASS BY USING TWO NUMBERS OF BEST

QUALITY EURO TYPE SLIP/AUTO HINGES (EBCO, HETTICH, HAFELE OR

APPROVED EQUIVALENT MAKE) AND PROVIDED WITH AN APPROVED

QUALITY AND PROFILE BRUSH FINISHED SS HANDLE (MINIMUM 150 MM

LONG) OF 304 GRADE. THE GLAZED SHUTTERS SHALL HAVE 5MM THICK

FLOAT GLASS FITTED IN 16 MM THICK MARINE PLYWOOD FRAME ALROUND

WITH NECESSARY CLEATS, CLIPS AND MAGNETIC CATCHERS. THE WILL BE

ONE GLASS SHELF OF 10 MM THICK EDGE POLISHED FLOAT GLASS FOR

PVC LIPPING FOR SHUTTERS SHALL BE 2MM THICK, THICKNESS OF EDGE

LIPPING OF CARCASS/ PLYWOOD PARTITION SHOULD BE 0.8MM AND

THICKNESS OF FOUR EDGE LIPPING AROUND THE REBATE OF GLASS SHUTTER

SHALL BE 0.6MM. THE LIPPINGS/BANDING SHALL MATCH WITH THE

APPROVED QUALITY SS PINS AND SHALL BE ADJUSTABLE FOR VARIOUS

FITTED TO THE WALL WITH PVC CAPPED 2MM THICK CONCEALED MS

HANGING BRACKETS EACH HAVING WIDTH OF 15MM AND DEPTH OF 50MM

@ 2 BRACKETS FOR EACH CABINET WHICH IS FIXED ON WALL WITH

THE UNITS SHALL HAVE MACHINE PRESSED LAMINATION HAVING THICKNESS

5 Sqm

TOTAL(G)

H FURNISHING & MISCELLANEOUS WORKS

1 BEAUTIFULLY STITCHED WINDOW AMERICAN PLEATED CURTAINS WITH

BLACK OUT LINING AND HEAVY DUTY APPROVED ALUMINUM CHANNELS.

(BASIC RATE OF CURTAIN= 850.00RMT), COMPLETE AS PER ARCHITECTS

DIRECTION (APPROX HT. 8'-0")

60 RMT

2 ARTEFACTS & ARTWORKS/PAINTING ETC AS APPROVED BY BANK'S

ENGINEER/ARCHITECT(BASIC PRICE RS. 1500/-).

5 NOS

3BEAUTIFULLY STITCHED WINDOW POLYSTER SHEER CURTAINS WITH

APPROVED HEAVY DUTY ALUMINUM CHANNELS. (BASIC RATE OF CURTAIN=

225.00RMT) COMPLETE AS PER ARCHITECTS DIRECTION (APPROX HT. 8'-0")

46 RMT

TOTAL(H)

I SANITARY FITTINGS & FIXTURES (CONCEALED PLUMBING WORKS) WITH

NECESSARY MATERIALS INCLU.CONNECTING THE EXISTING WATER SUPPLY

LINES & DRAINAGE LINES. COMPLETE. (JAQUAR MAKE - CONTINENTAL

RANGE)

1 REMOVAL OF EXISTING AND PROVIDING & FIXING OF NEW OVERHEAD

SHOWER OF JAQUAR MAKE (MODEL NO. OHS-1813 .BASIC

COST:RS.4100)WITH S.L. CONCEALED DIVERTER FOR BATH/SHOWER (MODEL

NO. CON-421. BASIC COST RS.2350 & BATHTUB SPOUT WITH FLANGE

(MODEL NO.SPJ-CHR-35429. BASIC COST.RS.1240.00) INCLU. LABOUR WITH

ALL REQUIRED PLUMBING MATERIALS, CUTTING, GROOVING, MAKING THE

GOOD WALLS & FLOOR ETC. COMPLETE.

11 NOS

2REMOVAL OF EXISTING AND PROVIDING AND FIXING OF NEW VITROUS

CHINAWARE EWC-WALL HUNG WITH C.I CHAIR BRACKET AND COVER

COMPLETE AS APPROVED MAKE (MODEL NO.CNS-WHT-959NS BASIC

COST.RS.-6460) (GLAZED EARTHWARE WATER CLOSET PAN) OF ANY ISI MAKE

OR EQUIVALENT OF COLOUR AND DESIGN AS APPROVED BY THE ARCHITECT.

11 NOS

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

Page 11 of 14


3SUPPLYING AND FIXING WALL MOUNTED CISTERN WITH SLIM BODY

INSTALLATION KIT WITH CONTROL PLATE WHITE/CHROME FINISH OF

APPROVED MAKE AND AS APPROVED BY BANKS ENGINEER/ARCHITECT. THE

RATE INCLUDES COSTS OF ALL MATERIALS INCLUDING NON-CORROSSIVE

FASTNERS,EQUIPMENTS, LABOUR CH ARGES, RUBBING, CLEANING THE SITE

ETC. COMPLETE AS PER INSTRUCTIONS OF BANKS ENGINEER / ARCHITECT.

(BASIC COST = RS 1800/-PER NO.) MAKE: JAQUAR/equivalent)

11 NOS

4 PROVIDING AND FIXING OF NEW APPROXIMATED SIZE 410X410X150MM

GLAZED VITEROUS EARTHWARE HAND WASH BASIN (COUNTER- TOP

MOUNTED) OF APPROVED MAKE SUCH AS

PARRYWARE/EURO/NEYCER/HINDWARE/JAQUAR OF WHITE COLOUR,

ATTACHED JAQUAR ANGLE COCK, FIXING AND SUPPLY OF CI BRACKET,

RUBBER PLUGS, THICK CP CHAIN, CP INLET CONNECTION INCLUDING 32MM

CP EUROPEAN TYPE BOTLE TRAP OF JAQUAR WITH 300MM WALL

CONNECTION PIPE OF JAQUAR MAKE INCLUDINGCP WASTE COUPLING,

CUTTING FLOORS, DRILLING HOLES IN THE WALL AND MAKING GOOD THE

DAMAGES ETC.. COMPLETE AS DIRECTED BY THE ARCHITECT / BANK

ENGINEER. (BASIC COST OF BASIN = RS.2,390/-PC), (MODEL NO :- CNS-WHT-

905) MAKE: JAQUAR/equivalent

18 NOS

5 PROVIDING AND FIXING OF NEW 15MM DIA CP ANGLE COCK OF JAQUAR

WITH CP WALL FLANGE OF JAQUAR WITH 15 MM CP CONNECTOR PIPES FOR

WASH BASINS / PVC CISTERN FOR WC/ KITCHEN SINK WITH MATERIAL AND

LABOUR ECT. COMPLETE.(BASIC COST: RS.1400/-) MAKE:

JAQUAR/equivalent

12 NOS

6 P/F JAQUAR JET SPRAY IN TOILET. (MODEL NO :- ALD 579) (BASIC COST:

RS.1175/-)MAKE: JAQUAR/equivalent

11 NOS

7 REMOVAL OF EXISTING AND PROVIDING & FIXING OF 15MM DIA CP BIB COCK

WITH CP WALL FLANGE OF JAQUAR WITH 15MM CP CONNECTOR PIPES FOR

ABLUTION TAP WITH MATERIAL AND LABOUR ETC.COMPLETE. (BASIC COST:

RS.1900/-).MAKE: JAQUAR/equivalent

11 NOS

9PROVIDING AND FIXING OF SINGLE LEVER EXTENDED BASIN MIXER (HEIGHT-

97MM)OF JAQUAR WITH WITHOUT POPUP WASTE SYSTEM WITH 450MM

LONG BRAIDED HOSESCP CONNECTOR PIPES FOR ABLUTION TAP WITH

MATERIAL AND LABOUR ETC..COMPLETE FOR WASH BASIN. (MODEL NO :-

KUB -CHR-35023FB))(BASIC COST: RS.4028/-)

18 NOS

10 PROVIDING AND FIXING CP STAINLESS GRATING WITH COCKROACH TRAP FOR

NAHANI TRAP ROUND OR SQUARE , 100 MM CI NAHANI TRAP HEAVY SOIL

QUALITY INCLU.FRAME WITH FIXING OF TILES CEMENT FINISHING OF TRAP

,MATERIAL & LABOUR ETC. COMPLETE.

13 NOS

11 SUPPLYING AND FIXING NEW CP CONCEALED STOP COCK OF JAQUAR MAKE

(MODEL NO. 069 KN).THE RATE INCLUDES COSTS OF ALL MATERIALS

INCLUDING NON-CORROSIVE FASTNERS, EQUIPMENTS, LABOUR CHARGES,

CURING. CLEANING ETC. COMPLETE AS PER INSTRUCTIONS OF BANKS

ENGINEER / ARCHITECT. COMPLETE. (CON-503KN) (BASIC COST: - RS.650/-

PER NO.)MAKE: JAQUAR/equivalent

11 NOS

12PROVIDING & FIXING OF NEW CP FLUSH VALVE OF JAQUAR WITH CP WALL

FLANGE OF JAQUAR WITH 15MM CP CONNECTOR PIPES FOR WATER CLOSET

WITH MATERIAL AND LABOUR ETC.COMPLETE. (BASIC COST: RS.2900/-)

11 NOS

13P/F FLOOR MATCHING COLOUR S.S GRATING / JALLI HEAVY QUALITY 100 MM

DIA NAHANI TRAP WITH COVER OF APPROVED MAKE.:(BASIC COST: RS.125/-)

13 NOS

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

Page 12 of 14


14 SOAP DISPENSER (500 ML.) OF JAQUAR MAKE. (BASIC COST: RS.325/-) 13 NOS

15 PROVIDING AND FIXING CI ADAPTERS WITH MATERIAL & LABOUR ETC.

COMPLETE.

a) 75MM DIA 11 NOS

b) 100MM DIA 11 NOS

16 PROVIDING & FIXING CP TOWEL RING 200 MM DIA OF JAQUAR WITH

MATERIAL & LABOUR ETC.COMPLETE. (MAKE: JAQUAR) (MODEL NO: AQN-

7721). (BASIC COST: RS.750/-)

15 NOS

17 PROVIDING AND FIXING CP TOILET ROLL HOLDER WITH FLAP OF JAQUAR

WITH MATERIAL AND LABOUR ETC. COMPLETE. (BASIC COST: RS.900/-)

(MAKE: JAQUAR) (MODEL NO: ACP-1153N)

11 NOS

18P/F JAQUAR MAKE TOWEL RACK 600MM LONG WITH LOWER HANGERS

COMPLETE. (MODEL NO: ACN-1181N) (BASIC COST: RS.2150)

11 NOS

19 P/F JAQUAR SOAP DISH HOLDER (BASIC COST: RS.525/-) (MODEL NO: ACN-

1131N)

11 NOS

20 P/F extended jaquar make kitchen tap etc. Complete. (For kitchen sinks)

(model no: CQT- 23347) (BASIC COST: RS.1050/-)

2 NOS

21 P/F Anti scratch range by Nirali (Elegance unique, size: 915mm x510mm, bowl

depth: 190mm, basic cost: rs.10500/-)

2 NOS

22 P/F shower curtain with s.s rode 25 mm dia with wall holders (size: 5' x 6') as

approved by architect.

11 NOS

23waste bin with lid as approved by architect. (s.s finish) (Basic cost: Rs. 1500/- )

12 NOS

24 Supplying and fixing CP Robe hook two way in toilets (jaquar- continental,

modelno: 1161N). The rate includes costs of all materials including non-

corrosive fastners, equipments, labour charges, curing. Cleaning etc. Complete

as per instructions of banks engineer / architect. Complete. (Basic cost:

Rs.425/- per no.)

11 NOS

25 P/F master cock (MAKE: JAQUAR) 1 NOS

26 single towel rail (MAKE: JAQUAR) (model no: ACN-1111NM) (BASIC

COST: RS.975/-)

11 NOS

TOTAL(I)

J EXTERNAL & INTERNAL WATER SUPPLY

1 Providing materials & labour for fixing concealed in the wall including making grooves by

machine following sizes of cpvc heavy aproved make ,screwed and threaded joints with

supply of necessary gi specials of aproved "r"brand etc. specials like sockets, unions,

elbow, bends, reducers, plugs, tees etc.inclu. supply of clamps and enamel paints,hemp

yarn for water tight joints inclu. hydraulic testing as per iss inclu. making holes, grooving

in walls and roof and making good the damages .complete incliding water supply

connection for aquaguard, geycer etc complete as directed by Bank's

Engineer/Architect..

a) 15 mm dia cpvc pipe 80 RMT

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

Page 13 of 14


b) 20 mm dia cpvc pipe 80 RMT

c)32 mm dia cpvc pipe 105 RMT

2 Providing materials & labour for fixing 0n the exposed wall faces including labour,

following sizes of gi heavy c-class tata or equivalent make ,screwed and threaded joints

with supply of necessary gi specials of aproved "r"brand etc. specials like sockets,

unionnuts, elbow, bends, reducers, plugs, tees etc.inclu. supply of clamps, nails and

enamel paints, hemp yarn for water tight joints inclu. hydraulic testing as per iss inclu.

making holes, grooving in walls and roof and making good the damages are bringing to

good as the original including one coat of primer & 2 coats of enamel paints as directed

by the architect for flush valvesof the wcs. complete.

a) 32 mm DIA 20 RMT

3 Providing & fixing brass ball valve isi make zoloto or equivalent make with material &

labour complete.

a) 15 mm dia 11 NOS

b) 20 mm dia 11 NOS

c) 32 mm dia 11 NOS

TOTAL(J)

K DRAINAGE

1 Providing and fixing PVC pipes (3"or 4") of supreme/ prince or equivalent in position of

required size with special fittings, traps, bends, Y's , floor and nahani traps etc including

chemical sealed joints as required at site making necessary connections with existing

lines for waste water lines wherever necessary.

80 RMT

TOTAL(K)

TOTAL Part A- Civil + Furniture (A TO K) (Rs.)

ADD CGST 9% ON TOTAL

ADD SGST 9% ON TOTAL

GRAND TOTAL -Part A - Civil & Furniture

Total amount in words :

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

RATE IN WORD:

SEAL & SIGN OF CONTRACTOR.

Page 14 of 14


Part B - Electrical

Item No Item Description Qty Unit Rate Amount

A MCB - DB

1 Supply and fixing recessed in wall of 10 way TPN (8+6+30) with Per Phase Isolation

DBs in vertical type distribution board. The DB shall be made out of high quality CRCA

sheet steel and shall be pre treated and powder coated to give matt finish RAL 9010

and should have gaskets to ensure complete IP - 43 protection with Anti Insertion

Marking and spirit level to ensure the professional alignment and door shall have 180

deg opening and reversible type to avoid inconvenience during operation and

maintainence. The DB shall be as per IS 8623 part III and be suitable for 240 / 415 V,

50 Hz AC power supply. The DB shall be tested for a minimum dielectric strength of 2.5

kV / sec (but without MCB/ RCCB / Isolator) Equivalent to Hager Cat Ref: VYP10DH

5 Each

2 Supply and fixing in existing DB with connections, 63 Amp, Four pole, MCB. The

housing of MCB shall be made from heat resistant thermoplastic material and shall have

high impact strength. The MCB shall be current limiting type (Energy Limitation Class -

3) with 10 kA breaking capacity. MCBs terminals shall have provision for dual

termination. MCBs shall have non-breakable type Metal DIN clip with dual position

facility. MCB shall comply with latest relavent IS/IEC standard codes. i.e IS - 8828 -

1996 & IEC - 60898. Equivalent to Hager Cat Ref: NCN463N

5 Each

3 Supply and fixing in existing DB with connections, 40 Amp double pole (two module )

240 V High Immunity (HI) type residual current circuit breaker with over current

protection (RCBO) C - curve, 6kA breaking capacity. The RCBO shall comply with latest

IEC 61009 standards. RCBO shall be integral unit suitable for operating on 240/415 V

AC, 50 Hz electrical supply systems providing both over current and earth leakage

protection to installation. RCBO terminals shall have provision for dual termination with

non breakable type Metal DIN Clip with dual position facility. The RCBO should have

sensitivity current of 30mA. Equivalent to Hager Cat Ref: ADH990

15 Each

4 Supply and fixing in the existing DB with connection "under and over voltage protection

release" fitted and latched with existing MCB/RCCBs/RCBOs to disconnect the circuit

breaker if the voltage reduces below 170 V AC or above 267V AC. It shall also have no

tripping for voltage less than 60 V AC to avoid nuisance tripping during power failure at

the installation. Equivalent to Hager Cat Ref : MZ215

15 Each

5 Supply and fixing in existing DB, Blanking plates 18 Each

6 Supply and fixing in existing DB, C curve MCB 's ISI Marked 10 kA Breaking capacity of

:

6.1 10 Amp 35 Each

6.2 16 Amp 54 Each

6.3 25 Amp 35 Each

SUB TOTALS OF A

B Wiring (Circuit & Light Point )

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

1 of 6


1 Supplying and drawing wiring for circuit / submain wiring along with earth wire with

following size of FRLS PVC insulated copper conductor , single core stranded cable in

existing surface / recessed medium class PVC conduit

1.1 2 X 1.5 sqmm + 1 X 1.5 sq mm earth wire 532 RMT

1.2 2 X 2.5 Sq mm + 1 X 2.5 sq mm earth wire 504 RMT

1.3 2 X 4 sqmm + 1 X 4 sq mm earth wire 350 RMT

2 Supplying and drawing, wiring for attendant call bell along with 2 X 1.5 sqmm wire of

FRLS PVC insulated copper conductor, single core stranded cable in existing surface /

recessed medium class PVC conduit as required.

392 RMT

3 Supplying and drawing, wiring for twin control light point / fan point (2 way) in existing

surface / recessed medium class PVC conduit with 1.5 sq mm FRLS PVC insulated

copper conductor single core stranded cable with surface . Medium class PVC conduit

with 2 No.s 6 Amp , 2 way modular switch glossy white in existing switch plates and loop

(neutral + earthing ) the point with 1.5 sqmm FRLS PVC insulated copper conductor

single core stranded cable etc. as required.

34 Point

4 Supplying and drawing wiring for light point / fan point / exhaust fan point / call bell point

in existing surface / recessed medium class PVC conduit with 1.5 sq mm FRLS PVC

insulated copper conductor single core stranded cable with 1 No.s, 6 Amp, 1 way

modular switch glossy white with LED indicator or bell push as required in existing plate

and loop ( neutral + earthing ) the point with 1.5 sqmm FRLS PVC insulated copper

conductor single core cable etc. All primary points

231 Point

5 Supplying and fixing of following sizes of medium class PVC conduit (MMS) along with

accessories in surface / recess / under flooring including cutting the wall and making

good the same in case of recessed conduit as required.

5.1 20 mm 520 RMT

5.1 25 mm 322 RMT

5.2 32 mm 686 RMT

SUB TOTALS OF B

C ELECTRICAL SOCKETS AND SWITCHES

1 Supply and fixing recessed in wall switch boards with modular GI Box with modular

plates making all wiring connections as required of following sizes: (Approved Make :

Hager, Insysta, Legrand, Arteor, Scheider, Zencelo )

1.1 1 Module 80 Each




RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

2 of 6






2 Supplying and fixing following modular wiring accessories on the existing modular plates

& switch box with wires including connections etc as required (Approved Make : Hager,

Insysta, Legrand, Arteor, Scheider, Zencelo )

2.1 120 W 2 module glossy white fan regulator 16 Each

2.2 6 A 1 Module glossy white bell push switch with LED indicator for attendant call bell 16 Each

2.3 6 A, 1 Module 1 way switch glossy white with LED 160 Each

2.4 6 A , 5 pin 2 Module glossy white universal socket 112 Each

2.5 1 Module glossy white RJ11 single phone outlet 20 Each

2.6 1 Module glossy white Co - Axial TV Socket 13 Each

2.7 2 Module glossy white buzzer 16 Each

2.8 2 Module 10/25 A glossy white socket 16 Each

2.9 2 Module 20 A 1 way switch glossy white with LED 32 Each

2.1 1 Module glossy white RJ 45 CAT 6 single inforamtion outlet 16 Each

2.11 2 Module glossy white blanking plate 135 Each

2.12 2 Module 6/16 A glossy white protruded socket 12 Each

SUB TOTALS OF C

D VOICE AND DATA CABLING

1 Supplying and drawing 2 pairs 0.5 mm dia FRLS PVC insulated annealed copper

conductor, unarmoured telephone cable in the existing surface / recessed PVC conduit

as required.

343 RMT

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

3 of 6


2 Supplying and drawing co axial TV cable RG 6 Grade 0.7 mm solid copper conductor

PVC insulated shielded with fine tinned copper braid and protected with PVC sheath in

the existing surface / recessed PVC conduit as required

224 RMT

3 Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface /

recessed PVC conduit as required

350 RMT

4 Supplying and fixing of following sizes of medium class PVC conduit along with

accessories in surface / recess including cutting the wall and making good the same in

case of recessed conduit as required.

4.1 20 mm 550 RMT

4.2 25 mm 546 RMT

4.3 32 mm 546 RMT

5 Supplying and fixing on the wall 1 No.s of wall mounted 12 U network rack (Dlink/ Digi

Link) with 1 No.s 24 port jack panel and terminating all CAT 6 cables in the jack panel

with ferrules as required

1 Each

6 Supplying and fixing on the wall 1 Nos. PVC krone box, suitable for 20 pair krone

modules with 2 no.s steel back mounting krone module frame 10 krone module with 2

nos 10 pair krone module with terminating all phone cables with ferrules as required.

1 Each

SUB TOTALS OF D

E ELECTRICAL FIXTURES

1 Supplying and fixing on existing ceiling fan hook ceiling fan 1200 mm sweep, white,

Crompton high speed, with all accessories but without regulator with fixing on existing

ceiling fan hook with flexible wires and connection to ceiling fan point as required.

6 Each

2 Supplying and fixing of ceiling fan 1200 mm sweep, white, Cromption high speed, with

all accessories but without regulator, with anchor dash fastners and ceiling fan hook for

fixing on ceiling with flexible wires and connection to ceiling fan point as required

10 Each

3 Supplying fixing exhaust fan 225-230 mm sweep grey color Crompton, MS metal body

and blade double ball bearing metal grill guard on wall / window with wires and

connection to exhaust fan point as required.

2 Each

4 Supplying and fixing exhaust fan 150 mm sweep Cropmton Mountair square profile

white color on window /wall wires and connection to exhaust fan point as required.

11 Each

5 Supply and fixing in existing cove, LED strip light 3000 K (Warm White), 4 watt per

meter, with aluminium profile with driver and with all accessories with wires and

connection to light point.

55 RMT

6 Supplying and fixing in existing false ceiling cove, LED strip light 6000K (Cool White), 4

watt per meter, with aluminium profile with driver and with all accessories with wires and

connection to light point as required.

26 RMT

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

4 of 6


7 Supply and fixing in existing false ceiling, recessed LED square downlight, white colored

bezel 6000K (Cool White) with PMMA Diffuser, 8 watt 760- lumens with LED driver and

with all accessories with wires and connection to light point as required.

108 Each

8 Supply and fixing in existing false ceiling, recessed LED square downlight, white colored

bezel 6000K (Cool White) with PMMA Diffuser, 8 watt with LED driver and with all

accessories with wires and connection to light point as required.

16 Each

9 Supply and fixing on ceiling surface, LED square downlight, white body 6000K (Cool

White) with PMMA Diffuser, 8 watt with LED driver with all accessories with wires and

connection to light point as required.

22 Each

10 Supply and fixing on wall, LED up - down light, 4000K (Neutral White), 290 Lumen, 4

watt, with LED driver and with all accessories and with wires and connection to light

point as required.

5 Each

11 Supply and fixing in false ceiling, recessed square LED accent light, 4000K (Neutral

White), 3 watt with LED driver and with all accessories and with wires and connection

with light point as required.

10 Each

12 Supply and fixing, recessed in wall LED skirting light, glossy white, 6 lumens, 350

mWatt, Hager CAT. Ref WSNH62 with 2 module recessed GI wall box with plates and

with all accessories and with wires and connection to light point as required.

10 Each

13 Supply and fixing, recessed on wall, attandant station with 1 No.s 18 module plastic fire

resistant gang box and 1 No.s 16 module plastic fire resistant gang box with 1 Nos 18

module cover plate and support frame, black colour with 1 Nos 16 module cover plate

and support frame black colour with 11 no.s 2 module electronic buzzer (GM Modular

Cat Ref AA 2049) with 11 no.s 1 module bell indicator display unit reset switch name

plate ( GM Modular Cat Ref AA 1050) with blanking plate and making all necessary

connections with all accessories with labelling for room indentification as required.

1 Each

14 Supply and fixing on wall, LED tube light, 4000K 5 watt GM Modular Cat Ref: NEBULUS

GM 0143 with intergral LED driver with all accessories and with wires and connection to

light point as required.

11 Each

15 Supply and fixing on wall, LED flexible gooseneck reading lamp, white body colour 5000-

6000K 3Watt with integral LED driver and with wires and connection to light point as

required

16 Each

16 Supply and fixing on wall, storage water heater 3 litre, 3000 watt, 230 - 240 V white

body colour, shock safe plug, with hot and cold connection pipes with all accessories

and connecting to inlet and outlet water plumbing pipes as required. Approved Make -

Racold (Pronto)

13 Each

17 Supply and fixing of chandelier in community hall area according the requirement, with

architect's approval. (Basic price of the item - Rs 8,500/-)

3 Each

SUB TOTAL OF E

F DISMANTLING WORK & BUY BACK OF REMOVED ITEMS

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

5 of 6


1 Less amount for buy back rebate to NABARD after Dismantling and removing and

carting away all the existing old and removed PVC conduit pipes, electrical fixtures &

fittings, PVC insulated copper wiring, switch borads switches , all existing old cables.

LS LS

Total Electrical(A+ B+ C+ D+ E - F)

G CGST @ 9%

H SGST @ 9%

Grand Total - Part B - Electrical

RATE IN WORDS:

TOTAL in words:

6 of 6


Part C - Air Conditioning

Item No. Item Description QtyUnit Rate Amount

1 Split Air Conditioners

Supply, Installation & Commissioning of 100% copper condensor 3

star rating, Aircooled split type Airconditioners comprising indoor

unit & outdoor unit on wall, installation with standard 10 feet length

refrigerant copper piping and pipe insulation and communication

and power cables between indoor and outdoor units and drain pipe

and MS Powder coated stand for outdoor unit complete with all

accessories including remote control with batteries and with

refrigerant gas commissioning and making and filling the

cutout/holes in the walls with cement mortar and finish with plain

cement plaster complete as directed at site. (Make : Bluestar /

Daikin / Hitachi / Carrier )

1.1 1.0 TR Split AC 3 Star 2 No.s



2 Additional Refrigerant piping, refrigerant gas and accessories

Supply, Installation & Commissioning of refrigerant copper piping

and piping insulation and communication and power cables

between indoor and outdoor units, complete with fittings, elbows,

bends, supporting arrangement on walls , cable trays,trenches and

commissioning with refrigerant gas complete as directed on site.

2.1 1.0 TR Split AC for above mentioned unit 10 RFT



3 Additional Drain piping & accessories

Supply and fixing of Condensate drain water piping constructed out

of PVC hard pipes, fittings, accessories, bends , elbows, tees,

flanges. Tappings, wall sleeves, hangers, supports, anchors

complete as directed at site.

3.1 25 mm nom. dia 45 RMT

3.2 32 mm nom. Dia 75 RMT

Total Part C- Air Conditioning

CGST @ 9 %

SGST @ 9%

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

RATE IN WORDS:

Page 1 of 2

Grand Total Part C- Air Conditioning

Abstract

Grand total Part A - Civil & Furniture , inclusive of GST

Grand total Part B - Electrical, inclusive of GST

Grand total Part C - Air Conditioning, inclusive of GST

Grand Total - Part A + Part B+ Part C

Place :

Date :

Name, Seal & Address of the contrator :

1. The L-1 agency will be decided on the basis of total amount of price bid.

2. The contractor has to quote for all the items of the tender. Incomplete tenders and without EMD will not be accepted.

Accepted all terms & conditions of technical & price/financial bid

TOTAL in words :

Grand Total in words:

Page 2 of 2

TENDER SCHEDULE RENOVATION OF VOF ......4 Brick bat Coba: After carrying out the water proofing...

Documents

Transcript of TENDER SCHEDULE RENOVATION OF VOF ......4 Brick bat Coba: After carrying out the water proofing...