TENDER NOTICE - Central Institute of...

Government of India

Central Institute of PsychiatryKanke, Ranchi – 834006, Jharkhand.Ph.: 91-651-2232618,2451115,2231848,2450822

Fax No.: 91-651-2233668, 2450823Email :[email protected] :www.cipranchi.nic.in

TENDER NOTICE

Sealed tenders are invited by the Director, Central Institute of Psychiatry, Kanke, Ranchi, on behalf of the President

of India, for supply of equipments, from Manufacturing or Authorized Dealers / Firms, as detailed below. Tender

documents, forms, terms and conditions, detailed specification, quantity etc. of tender item can be obtained from the office

of the Director, in person or addressing him by sending a self address envelop (A/4 size) with postage of Rs.60/- for each

tender affixed thereon along with only Bank Draft of Rs.300/- (Rupees Three hundred) only for each tender towards the cost

of tender item (non-refundable) drawn in favour of the Administrative Officer, Central Institute of Psychiatry, Kanke, Ranchi

-834006, Jharkhand.The tender document can also be downloaded from www.cipranchi.nic.in in which case the tender fee

Rs.300/- (Rupees Three hundred) only separately in the form of Demand Draft favouring Administrative Officer, Central

Institute of Psychiatry, Kanke, Ranchi – 834006, payable at Ranchi must be deposited at the time of tender submission.

Only Manufacturer / Authorized dealers, firms of repute dealing in the equipments / items listed below having

experience in sale and repair / maintenance, need tender. Price quoted should be valid for six months from the date of opening

of the tender and only latest models of equipments need be quoted. Price should be quoted for consignee’s site basis/ F.O.R.

destination. For imported goods also price should be quoted for consignee site basis / F.O.R. destination, i.e., custom

clearance and forwarding costs will have to be borne by the supplier. Tender documents will be issued from 23.11.2011 to

14.12.2011 in the institute between 10.30 a.m. and 04.00 p.m. Tender forms dully filled in respect of each item should be sent

in a sealed envelope containing price bid and Technical bid separately in sealed envelopes, and superscribed as Tender for

equipments along with tender nos. so as to reach the Director, Central Institute of Psychiatry, Kanke, Ranchi on or before

14.12.2011 latest by 04.00 p.m. The tender will be opened at 04.30 p.m. same day. In case 14.12.2011 is declared a holiday

for unforeseen reason, it will be opened on the next working day. Price bids for technically unqualified tenders will be

returned on or before 22.12.2011 and price bids of technically qualified tenders will be opened on 23.12.2011 at 04.00 p.m. in

the office of the Director. The Director, C.I.P. reserves the right to accept or reject any or all tenders so received without

assigning any reasons. Any attempt direct or indirect on the part of a tenderer, to influence the Director, C.I.P., or any other

authority, concerned with tender works will be a disqualification.

List of the items with tender numbers and bid security amount.

(Dr. S. Haque )Director

List of Purchasing Items for the Year 2011-12.

___________________________________________________________________________

Sl. No. Tender No. Description of Items / Services Bid SecurityAmount__________

1. Path/01/11-12/M&E. Urine Chemistry Analyzer Machine Rs. 6,000/-2. Path/02/11-12/M&E. Automated Haematology Analyzer Machine Rs.50,000/-3. Path/03/11-12/M&E. Fully Automated Chemiluminesence (Immunoassay Analyzer) Machine Rs.20,000/-4. Path/04/11-12/M&E. Elisa Reader Machine Rs.5,000/-5. CCN/01/11-12/M&E. EEG / ERP recording and Acquisition and Analysis Software Rs.1,95,000/-

for the EEG / ERP recording and Stimulus delivery system6. CCN/02/11-12/M&E. ENMG/ Evoked Potentials system Rs.20,000/-7. CCN/03/11-12/M&E. Matlab 7.13 Rs.20,000/-8. CCN/04/11-12/M&E. Curry 6.0 Rs.20,000/-9. CCN/05/11-12/M&E. ASA 4.8 Rs.20,000/-10. CCN/06/11-12/M&E. NPX Lab 2010 1.9.8.201 Rs.20,000/-11. CCN/07/11-12/M&E. BESA Research 5.3.7 Rs.20,000/-12. CCN/08/11-12/M&E. SCAN 4.5 Software Rs.20,000/-13. CCN/09/11-12/M&E. ENDNOTE Version X5 Rs.20,000/-14. CCN/10/11-12/M&E. BRAIN Plasticity Exercises Software Rs.20,000/-15. CCN/11/11-12/M&E. Anti Plagiarism Software Server Edition Rs.20,000/-16. CCN/12/11-12/M&E. EEMAGINE Software Rs.20,000/-17. CCN/13/11-12/M&E. EEPROBE Software Rs.20,000/-18. Comp/01/11-12/M&E. High Speed Optical Mark Reader / Scanner Machine Rs.25,000/-19. Solar/CMC/11-12/Misc. Comprehensive Annual Maintenance contract of Solar Packages. Rs.12,000/-20. Gen/01/11-12/M&E. E.C.T. Machine (Brief Pulse) Rs.8,000/- 21. Gen/02/11-12/M&E. Computerised E.C.T. Machine (Ultra Brief Pulse) Rs.20,000/-22.Gen/03/11-12/Misc. Psychological Tests Rs.25,000/-23.Gen/04/11-12/Misc. Anatomy and Physiology Laboratory Rs.8,000/-24. Gen/05/11-12/Misc. L.E.D. Colour Television Rs.12,000/-25. Gen/06/11-12/Misc. F.M. Radio based Music System with Speakers Rs.8,000/-26. Gen/07/11-12/Misc. Floor and Road Cleaning equipments Rs.20,000/-27. Gen/08/11-12/Misc. Microfilming and Digitization of OPD Case Records Rs.20,000/-

28. Gen/09/11-12/Misc. Iron Cot * Rs.6000/-

29. Gen/10/11-12/Misc. Asian E⁺ Tube light * Rs.10,000/-

30. Gen/11/11-12/Misc. SMF Battery * Rs.10,000/-31. Gen/12/11-12/Misc. Gym / Strength equipments Rs.12,000/-

_________________________________________________________________________________________________________________________

* Vendors may also apply for registration with CIP for supply in future.

(Dr. S. Haque)Director,

C.I.P., Kanke, Ranchi – 6.

Enclosure : Reg. Tender Advertisement letter No. G.17022/01/11-12/Misc.

Section – V

Technical Specification for Urine Chemistry Analyser Machine.

Tender No. Path/01/11-12/M&E.

Essential Features:

1. Test items: Bilirubin, Blood, Protein, Glucose, Lecocytes, Specific Gravity, PH, Uribilinogen, Ketone, Nitrite and Micro albumin etc..

2. Test wavelength: Red (R), Green (G) & Blue (B).3. Test principle: photoelectric colorimeter.4. Test strips: urinalysis strips.5. Test throughput; system should have not less than 600 per hour.6. Data memory: 2000 patient results.7. Language: English.8. Power supply: 100v-240v AC, 50-60HZ.9. System should have automatically rectify the test results influenced by non-specificaility, PH, Specific gravity

and color.10. Adopting automatic waste handling equipment, which avoids cross contamination between samples.11. Built-in thermal printer with high speed and low noise: facility for External stylus printer.12. System should have complete standard accessories and after supply installation / training should be require

at Pathology Department, CIP, Ranchi.13. Warranty must be 1 year.14. ISO / CE certified.15. Should also quote for CMC / AMC for the next five years.16. Installation on turnkey basis.17. A firm assurance of manufacturer to be given regarding the supply of spares / accessories for 5 years after

the warranty period.

Section – V

Technical Specification for fully automated Haematology Analyser Machine


Essential Features:

1. The instrument should be fully automated random access Haematology analyzer equipped with fluorescence flow cytometry based technology offering automatic start-up, shutdown and sample analysis.2. The instrument should report minimum 34 Parameters : WBC, RBC, HGB, HCT, MCV, MCH, MCHC, PLT, Neut%, Lymph%, Mono%, E0%, Bas0%, Neut#, Lymph#, Mono#, Eo#, Baso#, RDW-SD, RDW-CV, MPV, RET%, RET#, IRF, LFR, MFR, HFR, Pit-O, PLCR, PDW, PCT, Ret-He, IG#, IG%.3. The instrument should have throughput of more than 80 samples per hour.4. The instrument should have Hydrodynamic focusing / impedance method for RBC / PLT channel.5. The instrument should have Cyanide free SLS-Hb colorimetric method for the hemoglobin measurement.6. The instrument should have Fluorescence based semiconductor laser flow cytometry for enumeration of WBC-DIFF, Reticulocytes, Immature granulocytes & platelets.7. The instrument should perform automated reticulocyte analysis.8. The analyzer must be equipped to eliminate interferences of microcytic RBC’s from Platelet count.9. Dedicated body Fluid mode (two part differential) with enumeration of mononuclear and polymorphonuclear leukocytes.10. The system should have the following sampling modes and aspiration volumes. Auto sampler or manual closed mode: 150 µL, Manual open mode: 85µL, Capillary mode: 40 µL.11. The instrument should have comprehensive information processing system: User friendly Windows based software. Local Area Network integration possible with Lab information system.10,000 samples (including graphics), 5,000 sample information, 1000 selective orders.12. The instrument should have minimum maintenance, with Semiconductor laser having lower power consumption, higher stability, and longer life.13. The company supplying the instrument should have a good track record and excellent service and distributor network all over India.14. Malaria screening for each sample with CBC.15. The offer must contain buy back option for existing 5 parts Haematology Analyzer Machine (Sysmex SF 3000) purchased in the year 2003 (To quote separately for buy back otherwise it will be presumed that the quoted price for the new machine including buy back price also).16. Warranty must be 1 year.17. ISO / CE certified.18. Should also quote for CMC / AMC for the next five years.19. Installation on turnkey basis.20. A firm assurance of manufacturer to be given regarding the supply of spares / accessories for 5 years after the warranty period.

Section – V

Technical Specification for Fully Automated Chemiluminesence (Innunoassay Analyzer) Machine


Essential Features:

1. Analyzer should be based on the principle of Chemiluminesence technology.2. System should be fully automated random immunoassay analyzer with continues sample loading facility.3. Sample type: Serum, Plasma, Urine.4. Throughput: 100 test or more / hour.5. Analyser should be able to perform Hormones, Thyroid, Fertility panels etc. Hepatic markers, ferretin, Vitamin B12,

Folate and Tumor markers.6. Analyser should have routine, Diabetic panel.7. Analyzer should be capable of working one the concept of single unit test with facility to run even a single test. 8. Analyser carousel should have more component positions for keeping reagents.9. Reaction should be at37 degree centigrade.10. Facility for on board cooling at 2-4 degree should be available.11. STATE sample positioning should be available anytime.12. Analyzer should have dual clot and bubble detection and have automatic level sensing.13. There should be bar codes reader for reagent and calibrators.14. Remote servicing facility should be available.15. It should have onboard inventory management facility.16. System control center: through computer.17. External computer mondotory for proper data storage.18. Host connection facility should be there with RC 232 Port.19. Should have ultrasonic probe cleaning facility.20. Instrument should have complete standard accessories and after supply installation / training should be provided at

department of Pathology, CIP, Ranchi.21. Warranty must be 1 year.22. ISO / CE certified.23. Should also quote for CMC / AMC for the next five years.24. Installation on turnkey basis.25. A firm assurance of manufacturer to be given regarding the supply of spares / accessories for 5 years after the

warranty period.

Section – V

Technical Specification for Elisa Reader Machine


Essential Features:

1. System should be windows operated with touch screen or mouse, large display.2. The system should be 8- channel optical measuring system.3. System should have 96 wells plate – shaking features adjustable in time and speed.4. System should have multiple calculation modes like Abs, cut-off curve liner, log, point to point and exponent

regression.5. System has large memory to store test protocol and patient results.6. System should not have less than four wavelength filters like 405, 450, 492, 630 nm and 750 nm. There should be at

least 4 extra blank filter positions.7. System should have measured photometric range from 0.00 – 3.5 Abs.8. System should have additional lamp saving features.9. The on-board software should have capability of storing the calibration curve data for at least 8 standards in all the

test programs. The curve should be displayed on screen.10. System should have RS-232 port, external printer-optional.11. System should have complete standard accessories and after supply installation / training should b e provided at

department of pathology, CIP, Ranchi.12. Warranty must be 1 year.13. ISO / CE certified.14. Should also quote for CMC / AMC for the next five years.15. Installation on turnkey basis.16. A firm assurance of manufacturer to be given regarding the supply of spares / accessories for 5 years after the

warranty period.

Section – V

Technical Specifications for EEG / ERP recording and Acquisition and Analysis Software for the EEG / ERP recording and Stimulus delivery system.

Tender No. CCN/01/11-12/M&E.Essential Features:

1. Number of EEG channels should be 128 channels with simultaneous and independent channels for both monopolar and bipolar recording, with 4 separate channels for polygraph.

2. The system should be compatible with MRI and facility for simultaneous recording should be present.3. System should also have video recording facility including MPEG4 Hardware compression.4. Hardware should have:-- Noise <1.5 µVpp (@Fs= 100 Hz)- Gain 20x- Signal range 0.3 V (+150mV)- Resolution 22 bits, 71.5 nV per bit- Input common mode range – 2V - + 2V- Input impedance >10¹² Ohm- CMRR > 110 dB- Connector Micro coax, active shielding- Sampling rate maximal 2,048 Hz- Band Width DC – 550 Hz- Digital High and low frequency filters fully customizable- Should have optical fibre link with PC5. Software Specifications:- Real-time Acquisition and Display of all channels, both offline and online signal analyses features user defined digital filters, eye-blink correction

program, averaging, automatic detection of amplitude and latencies of predefined components- Power spectrum analysis, user defined frequency range for FFT, manual editing, Spectral Mapping, Coherence functions, lateralization effects, 3-D

source localization software (with following methods: Spatio-Temporal Dipole Fit, cortical Imaging, LORETA, sLORETA, swLORETA& MUSIC)- System should have facility of individual realistic head modeling based on MRI & 3D segmentation for source analysis.- Back averaging of signals associated with various cognitive stimulus presentations and for customized complex neuro cognitive protocols- Simultaneous analysis of predefined epochs of different lengths, user defined time locking for averaging, automatic reading of amplitude and latency of

present potentials online automatic facilities for averaging, filtering, and artifact removal. Provisions for continuous data analysis or epoch data / averaged data analysis

- EO and EC linked ears, common average reference and current source density (i.e. Laplacin norms) reference, with facilities for remontaging to any reference arrangement, e.g. average reference or current source density

- Topographic maps for raw score, z-score and absolute and relative power in various frequency bands. Topographic maps for absolute and relative power band ratios including gamma frequencies (O/θ; O/a; O/β; O/Y; θ/a; θ/ β; θ/Y; a/ β; a/Y; β/Y) connection maps for coherence, phase, asymmetry foreach frequency band

- Raw or edited EEG printouts of any montage for conventional EEG analysis- Automatic batch analysis software for automatic processing of large numbers of EEG files- Provision to manually detete the artifacts in the stored data.- FFT absolute and relative power in tab-delimited format - Appropriate stimulus protocols for conducting the evoked potentials (EPs) and Event - Related potentials (ERPs)- Facility to carry out various statistical analyses- Provisions for ASCII, MATLAB Data conversion6. Stimulus presentation- Multiple external trigger inputs, cognitive stimulus package testing P50, P100, N100, P200, P300, N400, contingent negative variation, mismatch

negativity, and bareitschaftspotentials, visual and auditory stimulation program, facility for recording and presentation of auditory stimuli words, time locking at the beginning and end of stimulus, facility for regrouping of stiuli for producing new averates.

7. System should be supplied with:-- Computer with hardware and software compatible with the equipment must have - Windows based system- Minimum Pentium dual 2- GHz Power PC, 4 GB RAM, 500 – GB hard drive- 21″ flat panel monitor with optimal resolution - High resolution colour laser printer- Two hours back up UPS- MRI compatible head caps-(sintered Ag / Agcl Cap Cables based head caps) for 128 channels with conductivity gel & preparing gel8. Should be FDA cleared and CE certified and the relevant documentary proof to be attached by the bidder9. The Bidder should provide list of users.10. Warranty must be 1 year.11. ISO / CE certified.12. Should also quote for CMC / AMC for the next five years.13. Installation on turnkey basis.14. A firm assurance of manufacturer to be given regarding the supply of spares / accessories for 5 years after the warranty period.

Section – V

Technical Specifications for ENMG / Evoked Potentials systemTender No. CCN/02/11-12/M&E.

Essential Features:

• Electrode inputs: 8 dedicated ENMG inputs and 16 or more EP Inputs (maximum channels = 16; ENMG input = 8)EMG channels: 8 Input dynamics: 250 mVpp

• Sampling: Sampling resolution: min 24 bits ADC Sampling Rate: up to 32 KHzResolution: 1/64 μV/bit• Amplifier: Noise approx. 0.3 µV RMS CMRR > 120 dB IMRR > 130dB Connection through TCP/IP protocol• Frequency filter: HF: 20 Hz -20KHz different stepsLF: 0.1Hz – 500Hz different stepsNotch filter : 50Hz, 60 Hz on or off• Impedance Check: Built in impedance scale by LEDIndividual measure of electrode resistance• Trigger: Internal and external • Patient isolation: Class IType CF (patient input)• Standards and Directive applied: 93/42/EEC DirectiveIEC 60601-1IEC 60601-1-1IEC 60601-1-2IEC 60601-1-4IEC 60601-2-40• PC DESKTOP: Desktop Computer with latest generation processorIntel Family ProcessorMinimum 4 GB RAMCD/DVD/BLURAY Drive for data archival.20.1” Square TFT color monitor with 1600 X 1200 pixels resolutionMinimum 1 TB HDD- 100/1000 LAN CARD- Licensed Software:

WINDOWS 7 PROFESSIONAL, MS OfficeColor Laser printerHigh Fidelity Speakers• TROLLEY: Custom made Trolley produced by the system manufacturer completely wiredIsolation transformerRetractile Keyboard Support• EMG software: Different customizable protocols and customizable workflows including different examsComplete Muscle/Nerve list and customizable one2 different EMG reports: quick and completePossibility to insert pre-defined sentences in the reportPossibility to change color to the traces displayed in the reportPossibility to manage the exam acquisition through fast keys• EMG acquisitions: EMG spontaneousEMG interferentialNeedle EMGSINGLE FIBER EMGSTIMULATED SINGLE FIBERMacro EMGMUAPPossibility to store EMG traces in the hard disk without time limitation and to review them, listening audio signal and changing all the trace parameters• NCV acquisitions: MCVSCVREPETITIVE EXAMDECREMENTF-WAVE

Contd. ….. on page No. 2

- 2 –

H-REFLEXBLINK REFLEXCOLLISIONINCHINGSSRHRVSkin temperature measurements and temperature probe (the software should have the automated facility of temperature compensation correction with NCV exams)Possibility to Connect a Magnetic Stimulator• SEP acquisitions: Somatosensory Evoked Potentials• Software database: Browser application allowing to backup one or more trace in CD/DVD/BLURAY/ZIP folder that can be reviewed in any other PC without installing the softwareData Export in ASCII, EDF and EDF+ format• EMG Accessories: Custom Keyboard with small joysticks to manage amplitude, time base and filtersFoot switchesHand-held stimulator including buttons with customizable function keys and 4 different types of interchangeable electrodesEffort Hand Grips (6 Kg &18 Kg) for registering patient efforts3 alligators lead for surface EMGKit of 100 disposable self-adhesive electrodesAdjustable ring electrodesBipolar stimulating barDisposable concentric needlesReflex HammerCable for needlesGround electrodesSnap cableElectroconductive gelTape ruler• SEP acquisitions: Through bar stimulatorSimulation sites: 2Electric stimulus duration: 0.01 to 1 mSElectric stimulus amplitude: 1 to 100 mAElectric stimulus frequency: 0.1 to 100 Hz• AEP acquisitions: Through Acoustic HeadsetPossibility to use internal earphoneIntensity: 0 – 132 db SPLClicks or tonesClick: Alternate, compression, rarefactionTone: linear and sinusoidal with the possibility to customize Frequency, Plateau, Rise/FallNoise: white and pinkP300CNV• VEP acquisitions: Through LED flash stimulator and Pattern reversal monitorLED Goggles stimulatorFlash stimulus frequency: 1 – 50 HzFlash stimulus duration: 1 – 20 msPattern reversal monitor: colored 19” TFTChessboard and horizontal/vertical bar (with different colors)Sinusoidal horizontal/vertical bar (with different colors)Stimulation: alternate and reversalFixation point should be available•The all 22 inputs also should acquire EEG signals and the necessary software should be supplied• Software database: • EP accessories: Bar stimulatorAcoustic head PhoneInsert earphone for Pediatric useLed flash stimulator(goggles)Ag/Ag CL cup electrodes (24pcs/set – 2 sets)Conductive pasteAbrasive creamTape rulerThe unit must be supplied complete with all leads and electrodes and the necessary operational accessories.

1. Warranty must be 1 year.

2. ISO / CE certified.

3. Should also quote for CMC / AMC for the next five years.

4. Installation on turnkey basis.

5. A firm assurance of manufacturer to be given regarding the supply of spares / accessories for 5 years after the warranty period.

Section – V

Technical Specifications for MATLAB 7.13Tender No. CCN/03/11-12/M&E.

Essential Features:

Currently the version available at CCN, CIP is MATLAB 7.0. The upgraded version must be supplied complete with all accessories of software and necessary operational manual and latest version should be provided on the date of purchase which should also have backward compatibility with the existing versions of the software for access and process of already acquired data. The current specifications which are required include:

Current Toolboxes available for which up gradation is required1. Simulink 6.62. Signal Processing Toolbox 6.23. Signal Processing blockset 6.04. Excel link 2.25. Fuzzy Logic Toolbox 2.1.36. Matlab Compiler 4.07. Neural Network Toolbox 4.0.38. Spline toolbox 3.2.19. Statistics Toolbox 5.010. Wavelet Toolbox 3.0

New version should also include: Filter design Toolbox DPS System Toolbox Communication Blockset and toolbox Video and Image Processing Blockset Phased Array System Toolbox Complete vision system toolbox Startup Accelerator for faster MATLAB startup on Windows, especially on Windows XP, and for network installations Spreadsheet Import Tool (6:51) Readability and navigation improvements to warning and error messages in the MATLAB command window Automatic variable and function renaming (2:52) in the MATLAB Editor Increased performance in the MATLAB class system, especially for complex data structures Matfile function (6:10) to load or save portions of an array in a MAT-file Gridded Interpolant object for more control, better performance, and memory efficiency in interpolation for gridded

data File I/O and External Interfacing MPEG-4 and MOV file support in VideoReader on Microsoft® Windows 7 NetCDF 4.1.2 support that provides cache size control for increased performance with large chunked NetCDF files Linux (64 bit) and Window (64 bit) compatibility

Warranty must be 1 year. ISO / CE certified. Should also quote for CMC / AMC for the next five years. Installation on turnkey basis. A firm assurance of manufacturer to be given regarding the supply of spares / accessories for 5 years after the warranty period.

Section – V

Technical Specifications for CURRY 6.0Tender No. CCN/04/11-12/M&E.

Essential Features:

Currently the version available at CCN, CIP is CURRY 5.0. The upgraded version must be supplied complete with all accessories of software and necessary operational manual and latest version should be provided on the date of purchase which should also have backward compatibility with the existing versions of the software for access and process of already acquired data. The current specifications which are required include:

Technical Specifications• Multiple devices, combined EEG / MEG evaluations• Template based, improved event detection, automated selective averaging• Artifact reduction via PCA-component projection• Vector Beamformer scans (3D grid, cortical surface with and without normals)• SWARM current density reconstruction (sLoreta-weighted accurate minimum norm)• Minimum LP norm current density reconstruction with automatic regularization• Time course display for scan dipoles and current density analyses• Improved DICOM wizard for anatomical images• Automated, volume based co-registration for 2nd/3rd image dataset• Talairach coordinate support• Built-in anatomical and functional atlas• Multiple cut-planes showing image data in 3D• Cortical surface inflation• Extended toolbars• Montage editor• Report generator• Export of results to Excel, Matlab, and SPM EGI file format support• CTF files format support• 4D Neuroimaging (BTI) generic file format support• Neuromagepoched (fif) generic file format support• Stellate 6.0 file format support• XLTEK rev K file format support• Column heading autodetection for digitizer file import wizard• Display of compensation coils in 3D preview• Improved performance for multi-core/-processor systems through parallelization

Warranty must be 1 year. ISO / CE certified. Should also quote for CMC / AMC for the next five years. Installation on turnkey basis. A firm assurance of manufacturer to be given regarding the supply of spares / accessories for 5 years after the warranty period

Section – V

Technical Specifications for ASA 4.8Tender No. CCN/05/11-12/M&E.

Essential Features:

Currently the version available at CCN, CIP is ASA 3.0.6. The upgraded version must be supplied complete with all accessories of software and necessary operational manual and latest version should be provided on the date of purchase which should also have backward compatibility with the existing versions of the software for access and process of already acquired data. The current specifications which are required include:

Technical Specifications: Complete analysis of EEG / ERP and MEG data including features like(pre)processing of data, co-registration of multimodal images

(MRI, fMRI, CT) and visualization of results to head model creation and various source localization methods. Allow users to process complete studies in batch mode and exchange data with MATLAB® for further analysis. Highly advanced 3D display of single channel coherence Being able to calculate coherence between a single channel and all other channels, Display of results ina 3D map When reading LORETA and sLORETA data, dipoles at local maxima should be activated Enhanced Spike and Seizure detection Additional rendering properties for TMS response objects Enhanced artefact detection feature MRI images with inverse solutions can be fused with fMRI, CT and SPECT images. Channel interpolation featureto select the nearest number of neighbouring electrodes used for the spline interpolation calculation

to generate illustrative data representation. New display filters: FFT display Set up your experiment Experiment Manager for straightforward analysis for a complete group of measurements and possibility to import .eeg files Personalized scripting Updated user manual and online help Coherence view properties: threshold freely adjustable to 3 decimal digits Enhanced license handling Case study data now installed in all users directory: Can be used without changing the permissions of the directory Added Compumedics (Neuroscan 32 bit) importer


Section – V

Technical Specifications for NPX LAB 2010 1.9.8.201Tender No. CCN/06/11-12/M&E.

Essential Features:

Currently the version available at CCN, CIP is NPX lab 1.9.7.176. The upgraded version must be supplied complete with all accessories of software and necessary operational manual and latest version should be provided on the date of purchase which should also have backward compatibility with the existing versions of the software for access and process of already acquired data. The current specifications which are required include:

Technical specification

Support to Global Data Format GDF file formats

Support to EBNEuro GNT file formats.

GUIFileConverter: Export data into EDF

Export ERP data into Matlab


Section – V

Technical Specifications for BESA RESEARCH 5.3.7Tender No. CCN/07/11-12/M&E.

Essential Features:

Currently the version available at CCN, CIP is BESA 2.0. The upgraded version must be supplied complete with all accessories of software and necessary operational manual and latest version should be provided on the date of purchase which should also have backward compatibility with the existing versions of the software for access and process of already acquired data. The current specifications which are required include:

Technical Specifications

Interaction with BESA MRI Source localizations can be displayed on the individual MRI even if no individual digitization of electrodes has taken

place. MATLAB interface ERP Analysis Source analysis CLARA: focusing 3D imaging method: CLARA (Classical LORETA Analysis Recursively Applied) Inter-trial phase locking (ITPL) Multiple Montaging options New default regularization constants for 3D source images: Each 3D source imaging technique should be assigned its

own regularization parameters. Windows 7 (64 bit) compatibility Postscript export: The option to export Top View screen content in encapsulated postscript format (eps) has been re-

implemented in BESA Research 5.3. Menu-guided check for program and dongle update File export to Besa Binary format MEG data recorded with 4D Neuroimaging

Source labels longer than 32 characters should be supported


Section – V

Technical Specifications for SCAN 4.5 SOFTWARETender No. CCN/08/11-12/M&E.

Essential Features:

Currently the version available at CCN, CIP is SCAN 4.3. The upgraded version must be supplied complete with all accessories of software and necessary operational manual and latest version should be provided on the date of purchase which should also have backward compatibility with the existing versions of the software for access and process of already acquired data. The current specifications which are required include:

Technical Specifications

A new look and feel to the User Interface In ACQUIRE and EDIT, there is now a History field that displays recently executed commands EEG Viewer Software allows you to view continuous data files recorded with SCAN LT or SCAN software Display CNT data with a derived Common Reference Load Snapshot Export CNT files (in Edit) to the European Data Format has been added programming-based batch processing language PCA/ICA filter toolbox EKG and Blink reduction tools File Recovery functionality User related documentation is now presented in compiled Help File format and pdf format

Windows 7/XP (64 bit) compatibility


Section – V

Technical Specifications for ENDNOTE VERSION X5

Tender No. CCN/09/11-12/M&E.

Essential Features:

Search bibliographic databases on the Internet:

Using EndNote's Connect...and Search... commands, to search Internet Access hundreds of remote bibliographic databases, including Web of Science, Ovid, PubMed, the Library of

Congress, and university card catalogs from EndNote. EndNote provides MARC formats that support native language libraries around the world. Search remote bibliographic databases using EndNote's simple search window Export references directly from Web of Science, Highwire Press, Ovid, OCLC, ProQuest and more. Create an unlimited number of libraries of any size Preview and edit references Link EndNote records to the Web Global Editing

The unit must be supplied complete with all accessories of software and necessary operational manual and latest version should be provided on the date of purchase

Warranty must be 1 year. ISO / CE certified. Should also quote for CMC / AMC for the next five years. Installation on turnkey basis. A firm assurance of manufacturer to be given regarding the supply of spares / accessories for 5 years after the warranty

period

Section – V

Technical Specifications for BRAIN PLASTICITY EXERCISES SOFTWARE


Essential Features:

1. Auditory & Visual: Total Training Package Enhances auditory system so that individual can think faster, focus better, and remember Sharpens visual system to improve ability to take in, react to, and remember what is seen. Improvement in memory of 10+ years Faster processing—131% faster in the auditory system and up to 300% in the visual system The self-confidence and quality of life that come from being at the top of game

SAAGE protocolsThe acronym SAAGE™ stands for Speed, Accuracy, Adaptibility, Generalizability, and Engagement, but to be fully SAAGE-compliant a program must follow the rigorous, specific requirements in each of these categories.Useful Field of View (UFOV)Visual processing and memory training from Posit Science incorporates UFOV, a visual training and assessment technology. Useful field of view is the area over which a person can extract information in a single glance without moving his or her head or eyes. A normal range of useful field of view allows a driver to keep his or her eyes on the road and stillnotice hazards that may come at the car from the side, such as a child running into the street after a ball.

2. Brain Fitness Program: Auditory Improve memory by 10 years Speed up auditory processing by 131% Find words on the tip of your tongue Participate in and remember conversations more fully.

3. Insight Speeds up visual processing by up to 300% Helps people take in more with each glance Improves brain activation in areas related to attention and focus

4. Drivesharp Speeds up visual processing and increases "useful field of view" so drivers see more of the road with

each glance Decreases reaction time, so drivers can stop 22 feet sooner at 55 mph Cuts at-fault crash risk by 50%

The unit must be supplied complete with all accessories of software and necessary operational manual and latest version should be provided on the date of purchase

Warranty must be 1 year. ISO / CE certified. Should also quote for CMC / AMC for the next five years. Installation on turnkey basis. A firm assurance of manufacturer to be given regarding the supply of spares / accessories for 5 years after the warranty

period

Section – V

Technical Specifications for Anti Plagiarism Software Server Edition


Essential Features:

1. Server Edition 2. Compares 14+ billion current and archived web pages; 55,000+ publications, including 30 million scholarly articles, books and conference proceedings; 3. 70+ million other published works from scientific, technical and medical (STM) journals, periodicals, magazines, encyclopedias, abstracts and a custom, private database of content based on an organization’s research needs.4.Support Windows Platform 5. Hardware independent version support.6. Upto10 users hardware support.7. Lifetime License with Free Updates8. Require Customized of Anti Plagiarism Software with CIP Logo and other details.9. Uses Google, Bing and AltaVista10. Microsoft Word single click plagiarism check11. Microsoft Word/Power Point Integration12. PDF support 13. Multiple Formats Support: pdf, doc, docx, html, txt, rtf14. 97% Effectiveness - No False Positives15. OWN Plagiarism-proof Database Storage- Handles 2.000.000 Documents- Extreme Plagiarism Detection Accuracy- Can be easily deployed to LAN- SQL support.

Report &Features:

1. Originality Report Generation Time & Date2. Checked Document Name (File Titel)3. Checked Document Location4. Checked Document Words Count5. Search Engines Queries Sent Count6. Document Author.7. A special chart that shows the relation of different parts of the checked document. It show the relative amount of Plagiarized part to the Original part of the document and Referenced part if any. Original , Plagiarized and Referenced Part is show in differentcolour code.8. Wikipedia Detection flag, Google Books Flag, GhoswritingServices , Counter Anti-Cheating.

Scope of Work :

Supply of software with media , Install at CIP’s SUN cluster server and configure as per CIP’s requirement. Client version will be installed at various Desktops and Laptop’s and smooth running is our existing LAN.One Year Warranty.At least 3 years technical support from OEM directly.

The prices for the supply of Software & subsequent technical support including upgrades for the additional 3 years period must be quoted separately.

Section – V

Technical Specifications for EEMAGINE SOFTWARE


Essential Features:

Currently the version available at CCN, CIP is eeMagine 3.0. The upgraded version must be supplied complete with all accessories of software and necessary operational manual and latest version should be provided on the date of purchase which should also have backward compatibility with the existing versions of the software for access and process of already acquired data. The current specifications which are required include:

3D FFT mapping and spectral analysis, adjustable to specific requirements 3D Current Source Density (CSD, surface Laplacian) mapping Spike detection and spike event review, manual acceptance/rejection Dipole analysis on the event list of spikes to characterize focal activity Spatial clustering of focal spike events


Section – V

Technical Specifications for EEPROBE SOFTWARETender No. CCN/13/11-12/M&E.

Essential Features:

Currently the version available at CCN, CIP is eeProbe 3.2.4. The upgraded version must be supplied complete with all accessories of software and necessary operational manual and latest version should be provided on the date of purchase which should also have backward compatibility with the existing versions of the software for access and process of already acquired data. The current specifications which are required include:

Pre-processing Automatic artefact rejection, continuous and trial-based Spatial filtering / interpolation EOG classification

Averaging Conditional averaging SNR assessment

Data management Comprehensive configuration files for analysis &visualisation

Visualisation Waveforms topographic view Waveforms time sequence map t-score topographic view Polarity switch Zoom raw data / averages 2D mapping

Analysis and tools Advanced, interactive filter design Smooth EEG data and waveforms (filtering) EEG / MEG and ERP downsampling Spectral transform Export to ASA


Section – V

Specifications for High speed Optical Mark Reader / Scanner Machine (OMR)

Tender No. : Comp/01/11-12/Misc.Essential Features :

High speed optical mark reader with a large input tray and a fast paper transport to transfer automatically data into computer.Paper Transport:

Input tray for atleast 600 forms (100 gsm) Two putput trays for atleast 550 & 70 forms Automatic alignment of the document Minimum format should be atleast 86 x 54 mm / 3.38” x 2.12” Maximum format upto 305 x 229 mm / 12” x 9” Should accept Paper quality 80 – 160 gsm, non-chemical Automatic detection of double feeds

Speed : Transport speed atleast 1.6 m/s / 63” / sec Rated throughput up to 7500 forms / h (DIN/A4)

Reading Heads: 40 tracks (1/5”) or 48 tracks (1/6”) Dynamic 15 levels reading head (TMN) or Threshold 7 levels reading head (TAN) Automatic adjustment to background and paper quality Red head for ballpoint and pencil marking, or infrared for pencil marking, self cleaning

Communication: RS-232; Protocol ASCII, XON/XOFF (USB- 2 in option)

Software: Delivered with the interpreter MAX FORM, AXF or ADELE + optional. Supports the form definition & application HODAtools

Physical Characteristics: Power supply 230 V / 0.8 A ; 50 / 60 Hz Operating temperature: upto 35°C.

Options: Second reading head (dual) Up to 3 bar code heads Integrated printer Motorized separation unit Motorized output tray USB connexion (TMN + MAX only)

1. Warranty must be 1 year.2. ISO / CE certified.3. Should also quote for CMC / AMC for the next five years.4. Installation on turnkey basis.5. A firm assurance of manufacturer to be given regarding the supply of spares / accessories for 5 years after the warranty

period.

Section – VSchedule to Tender of Comprehensive Annual Maintenance Contract of Solar PackagesTender No. Solar/CMC/11-12/Misc.Description of Solar Packages :Name of place where Solar Indoor Lights instt. with Qnty.

Name of place where Solar Street Lights instt. with Qnty.

Name of place where Solar Garden Light System instt. with Qnty. (Total = 1 Set)

1. Boy`s Hostel No. 1 – 1 set (4 light Points)

1. Infront of Male side hospital Gate –1 Set

(1) In front of Main Office (instt. at middle part of the garden) – 1 Set

2. Boy`s Hostel No. 2 – 1 Set (4 light Points)

2. Infront of Female side hospital Gate – 1 Set

3. Ladies Hostel – 3 + 5 + 16 = 24 Sets. (9 + 20 + 64 = 93 light points)

3. Maudsley Wd. – 1 Set Name of place where Solar Security Kiosk System instt. with Qnty. (Total = 2 Sets)

4. Guest House – 1 set (through Inverter) (8 light Points)

4. Near Female Section Gate (Male * Female side) – 2 Sets.

(1)Director Bunglaw – 1 Set

5.Emergency Wd. – 1 + 1 = 2 Sets (3 + 4 = 7 light Points)

5. Terrace of Psycho Social Unit – 1 Set

(2) Ladies Hostel – 1 Set

6.Tuke Wd. – 1 + 5 = 6 Sets (3 + 20 = 23 light points)

6. Morgagni Wd. (in campus &infront of gate) – 2 Sets

Name of place where Solar Water Heating System instt. with Qnty. (Total = 15 Sets)

7. Medical Library – 04 Sets (16 light points)

7. Fruit Garden (inside fencing near Morgagni Wd.) – 1 Set

(1) Guest House (Capacity : 200 LPD) – 1 Set(2) Emergency Wd. (Capacity : 200 LPD) – 01 Set

8. Morgagni Wd. – 1 + 1 = 2 sets (8 light Points)

8. In front of Morgue – 1 Set (3) Maudsley, Conolly&Krepelin Wd. (Capacity : 1000 LPD) - 01 Set each i.e. Total = 3 Sets., (4) R.H.C., Tuke& Juan Wd. (Capacity : 750 LPD) – 01 Set each i.e. Total = 03 Sets. , (5) L.P.Verma, Pinel, Cullen, Bleuler, S.S. Raju& Freud Wd. (Capacity : 500 LPD) – 01 Set each i.e. Total = 06 Sets.(6) 100 User’s Toilet near Conolly Wd. (Cap. : 2000 LPD) – 1 Set.(7) Water Pump (Make : CRI, Capacity : 0.5 HP, single phase with starter 6 to 10 Amp. Make Capital and Valve with G.I. Pipe from Sump to Motor installed at S.S. Raju Wd., L.P. Verma& Juan Wd. – 03 Nos.(8) Water Pump (Make : CRI, Capacity : 1 HP, single phase with starter 6 to 10 Amp. Make Capital and Valve with G.I. Pipe from Sump to Motor instt. at Maudsley, Conolly, Kraepelin , Tuke, Cullen &Pinel Wd.– 06 Nos.

9. Juan Wd. – 2 Sets (8 light points) 9. In front of Cullen Wd. – 1 Set Name of place where Solar Water Pumping System (Submersible) instt. with Qnty. (Total = 6 Sets)

10. Freud Wd. – 1 Set (4 light Points) 10. In front of Tuke Wd. – 1 Set (1) Guest House – 1 Set11. Bleuler Wd. – 2 sets (8 light Points) 11. In front of O.T. (Male) – 1 Set (2) Ladies Hostel – 1 Set12. Cullen Wd. – 2 Sets (8 light points) 12. In front of Juan Wd. – 1 Set (3) Emergency Wd. – 1 Set13. Pinel Wd. – 2 Sets (8 light points) 13. Vegetable Garden – 1 Set (4) Kraepelin Wd. – 1 Set. 14.L.P. Verma Wd. – 2 Sets (8 light points)

14. In front of Kitchen – 1 Set (5) Boy`s Hostel No. 1 – 1 Set

15. Conolly Wd. – 4 Sets (16 light points)

15. Behind of Kitchen – 1 Set (6) Bleuler Wd. – 1 Set.

16.Kraepelin Wd. – 2 Sets(8 light points)

16. In front of Teaching Bl. – 1 Set Name of place where Solar Water Pumping System (Surface) instt. with Qnty. (Total = 2 Sets)

17.C.C.A.P. – 1 Set (4 light Points)

17. Terrace of Berkley Hill Wd. – 1 Set (1) Vegetable Garden – 1 Set

18. Kitchen – 1 Set (4 light Points) 18. In front of Dispensary – 1 Set (2) Fruit Garden – 1 Set.19.R.H.C. Wd. – 2 Sets(8 light points)

19. Terrace of Matron Office – 1 Set Name of place where Tata Deep Solar Lantern instt. with Qnty. (Total = 6 Sets)

20. M.R.D. / O.P.D. – 1 + 2 = 3 Sets (3 + 8 = 11 light Points)

20. Terrace of O.P.D. – 1 Set (1) C.C.A.P. – 1 Set.

21. Main Office – 2 Sets (8 light points) 21. R.H.C. Wd. – 1 Set (2) Maudsley Wd. – 1 Set22. S.S. Raju Wd. – 3 Sets (12 light points)

22. Terrace and Campus of Ladies Hostel – 2 Sets.

(3) Tuke Wd. – 1 Set

23. Berkley Hill Wd. – 4 Sets (16 light points)

23. Terrace of Guest House – 1 Set (4) Kraepelin Wd. – 1 Set

24. Maudsley Wd. – 5 Sets 20 light points)

24. Campus of Director`s Bunglaw – 1 Set

(5) Conolly Wd. – 1 Set

25. Matron Office – 01 set (4 light points at Matron office, Telephone Exchange & A.O. office)

25. Terrace of Boy`s Hostel No. 1 – 2 Sets.

(6) Morgagni Wd. – 1 Set.

26. Director’s Office – 01 Set (4 light points at Director’s office &Despatch)

26. Terrace & Campus of Boy`s Hostel No.2 – 2 Sets.

27. Psychosocial Unit – 1 Set ( 4 light points)

27. In front of Bleuler Wd. – 1 Set

Total = 82 Sets. 28. Behind of Cinema Hall – 1 Set. 29. In front of Cinema Hall – 1 Set.30. In front of Pinel Wd. – 1 Set31. In front of C.C.A.P. Wd. – 1 Set32. In front of Freud Wd. – 1 Set33. In front of S.S.Raju Wd. – 1 Set.Total = 38 Sets.

Contd. …………… on P/2.

-2-

Rate of CMC in 1styear : (In figure ____________________________________________________________________________

(In words _________________________________________________________________________________________)

Rate of CMC in 2nd year : (In figure ____________________________________________________________________________

(In words _________________________________________________________________________________________)

Rate of CMC in 3rd year : (In figure ____________________________________________________________________________

(In words _________________________________________________________________________________________)

Note : Conditional tender will not be entertained

Instruction / Terms and Conditions :

1. Bid Security of Rs. 12,000/- (Rupees Twelve thousand) only in the form of Demand Draft pledged in favour of Director, CIP, Kanke, Ranchi – 834006, Jharkhand must be submitted alongwith tender papers without which tender will be rejected.

2. The tenderer, to whom the tender is awarded, will have to submit 10% cost of the tender value as Security Deposit in form of Deposit at Call, Bank Guarantee or in any other form as desired by Director / Administrative Officer, CIP, within 15 days from the date of issue of work order.

3. Interested tenderer may inspect the solar package on any working day between 10.00 a.m. and 04.00 p.m. before the submission of tender documents once after obtaining prior permission of Admn. Officer / any other officer of CIP authorized for this purpose.

4. Recent Income Tax Clearance Certificate will have to be submitted.5. If tender is submitted in the capacity of a Manufacturer of Solar equipments proof thereof (Registration Certificate etc.) and if tender is submitted as an

authorized dealer, (authorized for taking maintenance contract also) then the tenderer must enclose a valid certificate issued by the Manufacturer that they are authorized to take maintenance contract and repair work of the solar package of similar nature for which they are quoting rates. Copy of work order of similar maintenance work over the period of last three years, to be attached.

6. This comprehensive maintenance contract is for one year only and it would come into force from the date showing Solar packages in fully functional state by the tenderer to whom tender is awarded. A report to this effect must be submitted to ascertain effective date of CMC within two months from the award of tender which includes repair & replacement of missing parts. The CMC of the Solar packages may be extended for the additional period of 2 years and the rate for that may also be indicated.

7. All repair / maintenance work will have to be attended within 48 hours after receiving complaints by telephone or otherwise for which a complaint book will have to be kept and maintained by the tenderer at C.I.P. to ascertain date of complaint and date of repair etc. sufficient stock of necessary spare parts / batteries has to be maintained. No extra payment whatsoever except the CMC amount will be made for any spare part / article supplied or repair / any work done in connection with CMC.

8. If any complaint is not attended and Solar equipments concerned not made functional in a week, a default charge of Rs.100/- (Rupees One hundred) only per day per unfunctional Solar equipment will be deducted from your bill and / or adjusted from your security deposit from the 8th day (Day of repair will be inclusive). However, this may be relaxed by the Director, C.I.P. in exceptional and deserving case, which will be absolute discretion of the Director.

9. Payment will be made on quarterly basis for which pre-receipted bill in triplicate will have to be submitted. C.M.C. amount for the first quarter will be released within one month from the date of submission of the bill and inspection by C.I.P. authority in respect of proper functioning of complete Solar Package. However, payment terms may be relaxed by the Director, C.I.P. and shall be binding. Payment for the last quarter, however, will be made only after completion of the CMC period.

10. If the tenderer, to whom the tender is awarded, fails to provide service under CMC his bid Security / Security deposit, as the case may be will be forfeited and deposited in Govt. account and he will have to return the amount received for CMC for the period for which service is not rendered.

11. The CMC will include one time fixing / refixing of any / all the items of Solar Package (if required) and painting of iron structures at least once during the CMC period.

12. Tenderer must have Service Station in Ranchi.13. An agreement shall have to be signed in prescribed form by the firm to whom C.M.C. will be awarded.14. T.D.S. @ 2% will be deducted.15. Confirm that you have read all the instructions / terms and conditions carefully and agree to the same.16. The bidders shall submit their bids in two parts and seal the original and each copy of the bid in an inner and an outer envelope, duly marking the envelopes as

`original` and `copy`.17. Both the envelop (Technical Bid & Price Bid) should be superscribed as Technical Bid for Solar Packages & Price Bid for Solar Packages appropriately.18. In respect of Solar Water Pumping System (Submersible) at Bleuler Ward & Guest House, needs to be made functional. The Solar Plates of Kraepelin Ward may

be utilized which should clearly be mentioned. The details of other requirement should also be clearly mentioned.19. The details of parts to be replaced for the repair of each Solar Module should be given in annexure attached.

Signature of Tenderer

Full Name and Address of the person Signing (in Block Letter)Whether signing as proprietor / Partner / Constitute Attorney duly authorized by the Company.

Signature of Witness

Full Name and Address of Witness (In Block letters)

Section – V

Technical Specifications for ECT MACHINE (Brief Pulse)

Tender No. Gen/01/11-12/M&E.

Essential Features:

Option A:

1. Bidirectional Brief Pulse

2. Output Current: 0.8 Amp. Constant.

3. Frequency range: 20 Hz to 90 Hz in 6 steps.

4. Pulse width: 0.1 to 2 ms in 6 steps.

5. Mode: Auto & Manual.

6. Stimulas Duration in Auto mode: 0.1 to 5.9 sec.

7. Output display in joules & millicoulombs.

Option B:

1. Bidirectional Brief Pulse2. Current : 0.8 Amp. (constant)3. Frequency Range : 70 Hz (fixed)4. Pulse Width : 1 ms (fixed)5. Mode: Auto & Manual6. Stimulus Duration in Auto mode: 0.1 to 5.9 sec.7. Cerebral stimulation 0 to 40 volts

1. Warranty must be 1 year.2. ISO / CE certified.

3. Should also quote for CMC / AMC for the next five years.

4. Installation on turnkey basis.

5. A firm assurance of manufacturer to be given regarding the supply of spares / accessories for 5 years after the warranty period.

Section – V

Technical Specifications for Computerised ECT Machine (Ultra Brief Pulse)

Tender No. Gen/02/11-12/M&E.

Essential Features:

1. Should deliver current of bi-directional square wave ultra brief pulse of 0.3ms2. Should have 4 channels EEG, 1 channel ECG monitoring with 1 channel optical motion sensor to monitor the

movement during seizure for providing assessing seizure efficacy.3. Should have four different stimulus parameter knobs to vary pulse width, frequency, duration and current.4. Should have facility to monitor real time dynamic impedance during procedure & also static impedance.5. Should have LCD with Touch screen display with impedance display.6. Patient impedance from 100-5000 Ohms.7. Should be able to deliver ECT from voltage 50-400Volts.8. Should have protection against paddle to paddle short circuit or open circuit conditions.9. The Stimulus Control push button to be hinged for prevention of accidental delivery of stimulus and should have visual

indication of the status of Stimulus enable, Delivery or fault.10. Should have stimulus current from 500-800mA, Frequency 20-120Hz, Pulse width – 0.5-1.5msec, Stimulus duration of

0.5-4 sec.11. Minimum Power : 0.6 Joules for 220 ohm patient impedance12. Maximum Power : 202.8 Joules for 220 ohm patient impedance13. Charge : 5.0 – 1152m Coulombs in both manual and timer mode.14. Should have 2 channel thermal chart recorder with gain knobs for higher resolution printing.15. Should also have optional facility to connect system to any External PC and will be provided with monitoring software

to view physiological monitoring. The traces should be available in real time throughout the treatment. The data can be stored with all the treatment parameters on the PC or can be converted in to text format. Remote monitoring software should have features :

View up to six traces of real-time monitoring on a PC monitor: 4 EEG, 1 ECG and1 Optical Motion Sensor

Treatment parameters, patient data and impedance display also appear on the PC monitor to ensure patient safety.

Physiological monitoring and treatment data may be stored for later analysis, dosing management or treatment assessment.

For automated importation of Remote Monitoring Software data files into an extremely versatile and easy-to-use ECT database.

16. Should have optional facility of Comprehensive database to store the complete patient information and can be configured according to user needs.

17. The equipment should be tested and certified by International agencies and should have ISO 9001 certification with CE or TUV approved.

18. Warranty must be 1 year.19. ISO / CE certified.20. Should also quote for CMC / AMC for the next five years.21. Installation on turnkey basis.22. A firm assurance of manufacturer to be given regarding the supply of spares / accessories for 5 years after the

warranty period.

Section – VSpecifications for Psychological Tests

Tender No. : Gen/03/11-12/Misc.Essential Features :Section - A

Sl.No. Name of the Scale Author/s Quantity1. Dyslexia Early Screening Test – Second Edition (DEST-2) A Fawcett & R Nicolson 2004 01 No.2. Dyslexia Screening Test – Junior (DST-J) A Fawcett & R Nicolson, 2004 01 No.3. Dyslexia Screening Test – Secondary (DST -S) A Fawcett & R Nicolson, 2004 01 No.4. Wechsler Intelligence Scale for Children – Fourth UK Edition (WISC-IV) D Wechsler2004 01 No.5. Vineland Adaptive Behavior Scales,Second Edition (Vineland-II) S SSparrow,D V Cicchetti& D A Balla All 2005 02 Nos.

6. Children’s Memory Scale (CMS) M Cohen,1997 01 No.7. Working Memory Test Battery for Children (WMTB-C) S Pickering & S Gathercole,2001 01 No.8. Behavioural Assessment of the Dysexecutive Syndrome in Children (BADS-

C)H Emslie et al 2003 01 No.

9. Millon Pre-Adolescent Clinical Inventory (M-PACI) T Millon et al 2005 02 Nos.

10. Millon Adolescent Clinical Inventory (MACI) T Millon et al 1993 03 Nos.11. Cambridge Prospective Memory Test (CAMPROMPT) B A Wilson et al 2005 01 No.12. Benton Visual Retention Test – Fifth Edition A B Sivan 1991 01 No.13 Paulhus Deception Scales (PDS) D L Paulhus 1998 01 No.14 Test of Everyday Attention (TEA) I H Robertson et al 1994 01 No.15 Visual Object and Space Perception Battery (VOSP) E K Warrington & M James, 1991 01 No.16 Self Image Profile for Adults (SIP-Adult) R J Butler & S L Gasson, 2004 01 No.17 Conners’ Adult ADHD Rating Scales (CAARS) C K Conners, D Erhardt& E Sparrow,1999 01 No.18 Golombok Rust Inventory of Sexual Satisfaction (GRISS) S Golombok& J Rust ,2007 01 No.19 Golombok Rust Inventory of Marital State (GRIMS) S Golombok& J Rust 2007 01 No.20 Primary Test of Nonverbal Intelligence (PTONI) David J. Ehrler and Ronnie L. McGhee 01 No.21 Benton Laboratory of Neuropsychology: Selected Tests Arthur L. Benton, PhD 01 No.22 Professional Manual by Randy K. Otto, PhD, ABPP, Jeffrey E. Musick, PhD,

ABPP, and Christina B. Sherrod, PhDInventory of Legal Knowledge™ (ILK™)

Jeffrey E. Musick, PhD, ABPP and Randy K. Otto, PhD, ABPP;

01 No.

23 Brief Test of Attention™ (BTA™) David Schretlen, PhD 01 No.24 Stanford-Binet Intelligence Scales for Early Childhood (EarlySB5) Gale H. Roid, PhD 02 Nos.25 Stanford-Binet Intelligence Scales, 5th Ed. (SB5) Gale H. Roid, PhD 01 No.26 ASEBA® Test Observation Form for Ages 2-18 (TOF/2-18) Stephanie H. McConaughy, PhD and Thomas M.

Achenbach, PhD01 No.

27 Childhood Autism Rating Scale, Second Edition (CARS2) Eric Schopler, PhD,Mary E. Van Bourgondien, PhD,Glenna Janette Wellman, PhD, andSteven R. Love, PhD

02 Nos.

28 M.-FAST interview booklet. Lutz, FL:. Miller HA.2001 01 No.29 Minnesona Multiphasic Personality Inventory(MMPI-II)Adult Version Butcher,Graham et al 05 Nos.30 Wisconsin card sorting test Robert K Heaton et al 02 Nos.31 Wisconsin card sorting test computer version Robert K Heaton et al 01 No.32 Rorschach Interpretation version John E Exner,Jr,PHD,IrvingB.Weiner 02 Nos.33 Stanford Binet Intelligence Test Hindi version SantoshkrKulsrestha 06 Nos.34 Thematic Apperception Test( Cards) Murray 08Nos.35 Wechsler adult intelligence Scale Prabhalinga swami 08Nos.36 PGIBBD DwarkaPershad 05Nos.37 Minnesona Multiphasic Personality Inventory (MMPI-II)Adolescent Version Butcher,Graham et al 05Nos.38 Personality Inventory For Children,Second Edition(pic-2) David Lachar et al 03Nos.39 Autism & PDD Social skill Lesson Pam Britton Reese and Nena C. Challenner 02 Nos.40 Practical ideas that really work for students with autism spectrum

disorderKathleen McCONNELL AND Gail Ryser 02Nos.

41 Stress Profile Kenneeth M Nowack 02Nos.42 Children’s Measure of Obsessive Compulsive Symptoms (CMOCS) Cecil R. Reynolds 02Nos.43 Draw a person catalogue for interpretative analysis William H.Urban 02Nos.44 Bender Visual Motor Gestalt Test,second edition Gary Brannigan and Scott Decker 04Nos.

45 Binet Simon Scale 3Hindi Adaptation 03 Nos.46 Seguin Form Board 4Test with hand book 03 Nos.47 16 PF Questionaire I4ndian Adaptation Hindi Version,Form A to E S.D.Kapoor 04 Nos.48 Indian Adaptation of 3Chidren Personality Questionnire. Hindi

versionS.D.Kapoor and S Rao 05 Nos.

49 Medico Psychological 4Questionnaire Bharat raj 03 Nos.50 Nimhans Neuropsychol2ogical Battery for Adult S.L.RAO 04 Nos.51 Nimhans Neuropsycholo2gical Battery for children S.L.RAO 04 Nos.

Contd. …………… on page No. 2.

- 2 –

Sl. No.

Name of the Scale5 Author/s Quantity

52 Temperament & character Inventory junior Cloninger 03 Nos.53 Temperament & character Inventory Cloninger 04 Nos.54 AIIMS Neuropsychological Battery For Children Surya Gupta 02 Nos.55 AIIMS Neuropsychological Battery For Children Surya Gupta 02 Nos.56 Differential Aptitude Battery 01 No.57 Conduct Disorder Scale 01 No.58 Children psychological need Scale 01 No.59 Luria Nebraska Neuropsychological Battery (both Adult and children Version) Charles J Goldes Arnold D Purish, Thomas

A Hameke03 Nos.

60 Rorschach Inkblot cards with record blank H.Rorschach 08 Nos.61 BinetKamath Test of Intelligence 02 Nos.62 Wechsler Memory Scale 3rd edition- India (complete kit) Dr.PushpalathaGurappa 02 Nos.

Section - B

Sl. No.

Name of the Scale Author/s

1. WAIS-IV / WMS-IV Scoring Software and Report Writer The Psychological Corporation2. Wechsler Adult Intelligence Scale – Fourth edition (WAIS-IV) D Wechsler3. Differential Aptitude tests for guidance – Hindi (With Indian norms) A G Wesman, HG Seashore & G K Bennet4. Behavioral assessment of the DysexecutiveSyndorme in children (BADS-C) H Emslie et al.

5. Test of Everday Attention for Chldren (TEA-Ch) T Manly et al.

6. Rivermead Behavioral Memory Test For Children (RBMT-C) B A Willson, R Ivani- Chalin& F Aldrich7. Overall Assessment of the Speaker’s Experience of Stuttering (OASES) J S Yaruss& R Quesal8. Beery-Buktenica Developmental Test of Visual Motor Integration, 6th Edition (Beery VMI) K E Beery, N A Buktenica& N A Beery9. Adolescent / Adult Sensory Profile C Brown & W Dunn10. Children’s Measure of Obsessive Compulsive Symptoms (CMOCS) C R Renollds& R B Livingston11. Children’s PTSD Inventory (MACI) P Saigh12. Millon Adolescent Clinical Inventory (MACI) T Millon, C Millon, R Davis & S Grossman13 Millon Pre-Adolescent Clinical Inventory (M-PACI) T Millon, R Tringone, C Millon14 Self Image Profiles (SIP) R J Butler15 Autism Diagnostic Review, Revised (ADI-R) M Rutter, A LeCouteur and C Lord16 BASC-2 Intervention Guide and Progress Materials K Vannest, C R Reynolds & R Kamphaus17 BASC-2 Behavioural and Emotionla Screening System (BASC-2 BESS) R W Kamphauss and C R Reynolds18 Conners Comprehensive Behavior Rating Scale (Conners CBRS) C K Conners19 Social Skills Improvement System R W Kamphauss and F M Gresham20 Test of Premorbid Functioning (TOPF) D Wechsler21 Cognitive Assessment training-Online (CAT-O) Occupational Therapist22 Millon Index of Personality Styles Revised (MIPS-Revised) T Millon23 Minnesota Multiphasic Personality Inventory-2 Restructured Form (MMPI-2-RF) Y S Ben-Porath& A Tellegen24 Wechsler Memory Scale-3rd Edition India (WMS-III India) D Wechsler25 Manuals for Empirically Validated Treatments: A Project of the Task Force on Psychological

InterventionsWilliam C. Sanderson, PhD & Sheila Woody

26 Personality Assessment Inventory (PAI) Leslie C. Morey27 Devereux Scale of Mental Disorder (DSMD) Jack. A. Naglieri Paul. A. Lepuffe, stevenl. Pfeiffer28 Fairy Tale Test Carina Coulacoglou29 Somatic Inkblot Series B.L. Dubey

1. The rate must be quoted for each item.2. Items should be supplied with warranty card and manual book.3. Warranty must be 1 year.4. ISO / CE certified.

Section – V

Technical Specification of Anatomy and Physiology LaboratoryTender No. : Gen/04/11-12/Misc.

Essential Features:

Sl. No. Description of Items Required QuantityA (1) Adult Human articulated Skeleton with Hanging facility in a glass cupboard with locking facility. 12 Full set of dis-articulated adult human skeleton 13 Open Racks for displaying the specimen 55 Microscope – Monocular, Binocular 2B Models1 Full size human body showing all muscles and arteries 12 Human Torso

- Male 1- Female 1’

3 Skin cross Section 14 Heart and large blood Vessels 15 Heart with detachable parts on a stand 16 Eye with different sections 17 Ear with different sections 18 Human brain with spinal cord 19 Lungs and Trachea 110 Larynx 111 Digestive System

- Stomach 1- Small Intestine 1- Large Intestine 1

12 Female Reproductive System- Uterus on Stand 1- Ovaries 1- Macroscopic Structure 1- Macroscopic Structure 1

13 Male Reproductive system 114 Urinary System 1

Kidney- Macroscopic Structure 1- Microscopic Structure 1

15 Joints and ligamentsWrist – Ankle 1Elbow – Knee 1Shoulder - Hip 1

16 Teeth 1C. Charts1. Skeleton System 22 Muscular system 2

Showing different muscles of the body 23 Joints and Ligaments 24 Nervous System – Brain

Spinal cord2

5 Cardio-vascular system 26 Respiratory system 27 Lungs 28 Trachea 29 Larynx 210 Digestive system 211 Oral Cavity 212 Teeth 213 Stomach Pancreas and Spleen 214 Small Intestine 215 Large Intestine 216 Liver and gall bladder 217 Kidney Macroscopic Structure 218 Kidney Microscopic Structure 219 Skin 220 Eye 221 Ear 222 Female Reproductive System 223 Menstrual Cycle 224 Male Reproductive system 225 Endocrine Glands 2

Contd. ……. On page No. 2

- 2 –

D Charts on First Aid1 First Aid for Burns 12 Cardiac Pulmonary Resuscitation

- Adults 1- Children 1- Infant 1

3 First Aid charts for emergencies such as fracture, drowning, wounds, poisoning, bites 1 each4 Bandaging

Fundamental Nursing - Laboratory equipmentsA Equipments1 Patient cots – Adult 3

- Child 1- Bed side locker 4- Stools / Chiar 4

2 Manikins for demonstrating nursing proceduresAdult male 1Adult female 1Child 1Trays different sizes- 24” x 16” 2- 14” x 10” 2- 11” x 9” 2- 8” x 5” 2

3 Trays with cover Assorted Sizes

2

4 Bowls with cover- 16” Diameter 2- 10” diameter 2- 4” diameter 4- 2-3” diameter 4- 6” diameter 4- 4” diameter 4

5 Enema Can1 Lt. Capacity 1½ Lt. Capacity 1

6 Kidney trays of assorted sizes 47 Measuring Jugs -

- 1000 ml. 1- 500 ml. 1- 250 ml. 1

8 BasinsAssorted size basins

4

9 Catheter dish with cover 210 Knife dish with cover 211 Feeding Cups 212 Douche Can 213 Sputum Mugs 214 Bed Pans 415 Urinals – Male 416 Funnel

- 4” diameter 2- 2” diameter 2

17 Jars with Covers- 12” x 8” 2- 6” x 4” 2

18 Dressing Drums- 8”x 4” 212” x 9” 2

19 Tub for sitz bath 120 Sauce pan with lid

- 1 Lt. Capacity 1-2 Lt. Capacity 1

21 Kettle- 1 Lt. Capacity 1- 2 Lt. Capacity 1

22. Trolleys with Upper and Lower Shelves 223 Pint measure 124 Galli Posts 125 Mugs 226 Bottle brush 2

Contd. …… on page No. 3

- 3 –

B. Instruments1 Cheatle forceps 22 Sponge Holding Forceps 23 Artery Clamps

- Straight 6” 2- Curved 6” 2

4 Dissecting Forceps- Toothed 2- Non – toothed 2

5 Mosquito Forceps 26 Kockers 27 Scissors

- Surgical 8” 2- Bandage 2- Mayo’s Cutting Scissors 2

8 Tissue Forceps 29 Sinus forceps 210 Biopsy forceps 211 Liver biopsy needle 212 Alice forceps 213 Probe 214 Groove Director with probe 215 Mouth gag 216 Tongue Depressor 217 Tongue holding forceps 218 Nasal Speculum 219 Aural Speculum 220 Re-tractors

- Single Hook 1- Double Hook 1

21 Bladder Sound 122 Male Urethral dilator One set23 Packing Forceps

- Nasal 1- Oral 1

24 Ear Irrigation Syringe 125 Ear Speculum 126 Shaving Set 227 Safety razor with blades 228 Bard Prker Knife Handle 229 Surgical Blades different sizes One set 30 Airway 431 Laryngoscope – Small 1

- Big 132 Proctoscope 133 Infusion Set 234 Otoscope 135 Opthalmoscope 136 Tracheostony set with various size of tracheal tubes One set37 Head mirror 138 Tunning Fork 139 Oxygen cylinder with stand 140 Oxygen mask 1C. Glass-Ware1 Measuring Cups

- 240 ml. 4- 120 ml. 4- 30 ml. 4

2 Undine 23 Eye bath-cup 24 Pipettes & Droppers 25 Glass Connections

- Different Types e.g. Y.T.L. 6 each6 Wolfs Bottle 27 Conical flasks 28 Ounce Glass 6

Dram glass 6


- 4 –

9 Thermometers- Oral 6-Rectal 6- Bath 2- Room 2- Lotion 2

10 Pulse meter 411 Urinometer 612 Lacto Meter 613 Haemoglobinometer 614 Specimen glasses 615 Test Tubes 2 dozen16 Glass Slides with cover 2 boxes17 Bottles 500 ml. Capacity for lotions and mixtures. 1018 Automizer 219 Manometer 220 Glucometer 221 Head Mirror 1D. Syringes and Needles1 Syringes

- 2 ml. 12- 5 ml. 12- 10 ml. 12- 20 ml. 12

2 Tuberculin syringe 63 Insulin syringe with needle 64 Needles – All sizes One dozen each5 Lumbar Puncture Needle 16 Trochar, Canula for abdominal paracentesis 17 IV Cannulas different types and sizes 68 Biopsy Needle

- Adult 1- Children 1

9 Sternal Puncture needle 1E. Suture Material1 Needle Holder

- 6” – 7” – 8” 1 each2 Suture Cutting Scissors 23 Suture Needle

- Straight 2- Curved 2

4 Suture thread- Silks 2 Packets- Cotton 2 Packets

5 Catgut- Silk 6 Tubes- Cotton 6 Tubes

6 Catgut tube breaker 27 Suture Clip 1 Packet8 Suture Clip applier and remover 2F. Rubber Goods1 Mackintosh roll

- Full bed length 5- Draw Mackintosh 5Extra for treatment and dressing etc . 5

2 Hot water bag 23 Ice Caps 2

Ice CollarCorrugated rubber sheet

4 Gloves different sizes 55 Catheters

- Urinary Catheter 2- Folley’s Catheter 2- Nasal Catheter 2-Plaint Catheter 2- Rectal Catheter 2

6. Finger Stalls different sizes 2 Sets7 Air Rings 28 Mucus Sucker 29 Breast Pump 110 Nipple Shield 111 Gastric Lavage Tube 1


- 5 –

12 Ryle’s tube13 Flatus Tube14 Blakemore SangeStaken tube15 Rubber Tubes with different diameter and size16 Rectal Syringe with Nozzle17 Ring pressories all sizes18 Douche nozzle different sizesG Miscellaneous Items1 Mortar and Pestle 22 Nelson’s Inhaler 23 Wooden Shock blocks 14 Spirit Lamp 25 Test Tube Stand 26 Test Tube Holder 47 Sterliser Small 28 Portable Autoclave 19 Torch 210 Nail Brush 211 Adult weighing Scale 1

Baby weighing scale 112 Back Rest 213 Splints different sizes 614 Bandages different sizes One dozen each15 Adhesive Tapes 216 I.V. Stand 217 Tape Measure 218 Bucket with cover 219 Comb 220 Sphygmomanometer

a- Regular 2b- Electronic 1

21 Stethoscope 222 Soap and Soap Dish 423 Dust Bins 224 Overbed Table (Heart Table) 225 Screens / bed side curtains 226 Three way adapter 327 Dettol 1 Bottle28 Phenyle 129 Methylated spirit 130 Benedict’s solution 131 Tr. Iodine / Betadine 132 Tr. Benzoin 133 Nitric Acid 134 Acetic acid 135 Sulphur powder Half Kg.36 Ammonium sulphate crystals Half Kg.37 Vaseline 1 Jar38 Glycerine 1bottle39 Liquid paraffin 140 Potassium permanganate crystals 200 Gm.41 Boric solutions 1 bottle42 Hydrogen peroxide 143 Sodium Bi corbonate powder 200 gm.44 Litmus paper strips red and blue 245 Female Dummy 146 Male Dummy 147 New Born baby Dummy 148 Cupboard 449 Wheel Chair 150 Trolly 151 Poster Stand 1H. Linen1 Mattress

- Adult 4- Child 1

2 Mattress cover- Adult 4- Child 1

3 Bed Sheets 10- Baby cot sheets 4

Contd. ….. On page No. 6

- 6 –

4 Draw Sheets 105 Pillows – Large 6

- Small 26 Pillow covers – Large 12

- Small 67 Sand bags with covers 48 Blankets 109 Bed Spreads 1010 Towels

- Bath 10- Hand 10- Surgical 10- Packing 10- Towel Clips 6

11 Sponge Cloth 212 Hot water bag cover 213 Ice Cap Covers 214 Air ring / cushion covers 415 Gowns – Mask 12 each16 Baby dresses of different sizes 217 Dirty Linen bag / Box 118 Leggings 2 Pairs19 Perineal Sheets 520 Triangular Bandages 1221 Manytailed bandaged 1222 Eye Shields 523 Dusters 2424 Slings 625 ‘T’ binder 226 Screen Curtains 2 Sets

1. The rate must be quoted for each item as per applicable unit.2. Items should be supplied with warranty card and manual book.3. Warranty must be 1 year.4. ISO / CE certified.5. Should also quote for CMC / AMC on equipments for the next five years.6. Installation on turnkey basis.7. A firm assurance of manufacturer to be given regarding the supply of spares / accessories for 5 years after the warranty period.

Section – V

Specification for L.E.D. Colour TelevisionTender No. : Gen/05/11-12/Misc.

Essential Features :

Sl. No.

Description of Item Specification

1. 32" LED T.V. 1. Skype ready, 2. Wireless LAN ready, 3. Track ID, 4. Video Search, 5. Media Remote, 6. Edge LED Backlight, 7. Display resolution WXGA (1366 x 768), 8. 3 D comb filter, 9. Deep colour, 10. Sound enhancer, 11. S-Force, 12. Simulated stereo, 13. DLNA, 14. HDMI (4), 15. Light Sensor, 16. USB play (Video, Music, Photo), 17. Power consumption Approx. 75 W (In operation) & 18. Standby power consumption Approx. 0.3 W.

2. 40" LED T.V. 1.Full HD, 2. Skype ready, 3. Wireless LAN ready, 4. Track ID, 5. Video Search, 6. Media Remote, 7. Edge LED Backlight, 8. Display resolution Full HD (1920 x 1080), 9. 3 D comb filter, 10. Deep colour, 11. Sound enhancer, 12. S-Force, 13. Simulated stereo, 14. DLNA, 15. HDMI (4), 16. Light Sensor, 17. USB Play (Video, Music, Photo), 18. Power consumption approx.. 99 W (In operation) & Standby power consumption approx.. 0.3 W.

3. 46" LED T.V. 1.Full HD, 2. Skype ready, 3. Wireless LAN ready, 4. Track ID, 5. Video Search, 6. Media Remote, 7. Edge LED, 8. Display resolution Full HD (1920 x 1080), 9. 3 D comb filter, 10. Deep colour, 11. Sound enhancer, 12. S-Force, 13. Simulated stereo, 14. DLNA, 15. HDMI (4), 16. Light Sensor, 17. USB Play (Video, Music, Photo), 18. Power consumption approx.. 100 W (In operation), 19. Standby power consumption approx.. 0.3 W., 20. Photo TV HD & 21. Presence sensor.

4. 55" LED T.V. Full HD 3D (with built in 3 D Transmitter), 2. Skype ready, 3. Wireless LAN ready, 4. Edge LED, 5. Track ID, 6. Video Search, 7. Media Remote, 8. Photo TV HD, 9. Display resolution Full HD (1920 x 1080), 10. 3 D comb filter, 11. Deep colour, 12. Intelligent Image enhancer, 13. Sound enhancer, 14. S-Force, 15. Simulated stereo, 16. DLNA, 17. HDMI (4), 18. Light Sensor, 19. Presence sensor, 20. USB play (Video, Music, Photo) & 21. Power consumption approx.. 166 W (in operation)

5. Buy back of Colour T.V. of this institute

Keltron / 20”, B.P.L. / 20 “ and EC / 20 “ &Onida / 29” – 04 Nos.), Sony / 21” (KVG21PD1) – 14 Nos., Phillips / 21” – 06 Nos., Sony / 25” (KVT25MF1K) – 02 Nos., Sony / 21 “ with woofer – 02 Nos., Videocon / 20” - 02 Nos. = Total 30 Nos.

1. The offer must contain buy back option for existing 30 Nos. CRT Colour T.V. purchased in the year 1999 to 2006 (To quote separately for buy back otherwise it will be presumed that the quoted price for the new LED T.V. including buy back price).

2. Items should be supplied with warranty card and manual book.3. Warranty must be 1 year.4. Should also quote for CMC / AMC on equipments for the next five years.5. Installation on turnkey basis.6. A firm assurance of manufacturer to be given regarding the supply of spares / accessories for 5 years after the warranty period.

Section – V

Specification for F.M. Radio based Music System with Speakers.Tender No. : Gen/06/11-12/Misc.


Sl. No.

Description of Item Specification Quantity

1 FM Radio Set (Any reputed make) ------ 01 No.2 Plena Mixing Amplifier – 240 Watt. Rated output – 240 Watt.

Power supply – 240 v AC / 24 V DC.Frequency response – 50 Hz to 18 kHz (+1 / -3 Db)Distortion - <3%4 balance mic inputs / 3 stereo inputs.Impedence – 1 K Ohms balanced.Sensitivity – 1.0 mV (mic inputs).Built in Phantom Power

01 No.

3 Pro-sound imported premium sound cabinet loudspeaker for high fidelity music & speech reproduction, with wall fixing Clamps.

Rated output – 15 watt, max 22.5 watt double speaker system,Inputs – 8 ohms, 70 V and 100 V.Complies – International installations and safety regulations, Power tapping – 15 / 7.5 / 3.75 / 1.9 watt, Sound Pressure level – 98/86 dB (SPL)Effective frequency range – 96 Hz to 19.5 kHz.Weight – Not more than 2 Kg.Opening angle – at 1 kHz / 4 kHz (-6Db) - 179º / 101º (hor.) & 168º / 35º (ver.)Supplied with wall fixing adjustable mounting bracket, Compact yet robust ABS enclosure.Rated impedence – 8 / 326 / 667 ohms.Transducers – 101.6 mm (4”) woofer, 13 mm (0.51”) dome tweeter.

01 No.

1. Items should be supplied with warranty card and manual book.2. Warranty must be 1 year.3. Should also quote for AMC / CMC on equipments for the next five years.4. Installation on turnkey basis with fixing speaker connected with heavy gauge wire etc..5. A firm assurance of manufacturer to be given regarding the supply of spares / accessories for 5 years after the warranty period.

Section – V

Technical Specification of Floor and Road Cleaning Equipments

Tender No. Gen/07/11-12/Misc.

A. Heavy Duty Power Sweeping System:

Essential Features:

1. Sweeping System:

• Sweep path shall be atleast 1570 mm• The main broom shall be a one-piece, nylon bristle, plastic core brush of not less than 1200 mm in length.• The side broom shall be changeable without the use of tools.• The side broom shall be fully retractable and spring mounted for protection and permit at least 120 mm of reach beyond the bumpers and frame.• It shall have a variable speed sweeping system with variable speeds for sweeping a variety of debris and controls dust.• It shall have a full 140 mm of ground clearance for climbing bumps and curbs The rear corners of the machine shall have 250 mm of clearance over obstacles.2.Debris Hopper :

• The hopper access door shall be at least as wide as the hopper.• The hopper access door shall be at least as wide as the hopper.• The hopper shall be constructed of at least 11-guage steel and have a capacity of upto 680 Kgs and is minimum of 620 liters.3.Dust control :

• The single dust filter is not less than 10 sq. meters in area and no more than 4 pleats per inch for better clean back.• It is equipped with a light indicating the filter is clogged.• It is equipped with a timed filter shaker.• It has the ability to shut off the vacuum fan to allow sweeping in wet conditions.• There is a permanent baffle type prefilter to prevent heavy duty debris and water from reaching the filter.4.Engine / Electrical:

• Has an optional 360 degree accessible, manually swing engine outside frame for inspection.• Has a minimum of 53 h.p., water-cooled industrial engine with liquid propane fuel.• It has a distrutorless ignition system-type engine to lower maintenance costs.• The radiator has a four-core design.• The engine has a sufficient power to quickly climb the steep hill with a travel speed of no less than 10 mp.• The engine is shock-mounted and the radiator is shock-mounted independent of the engine vibrators.• There are gauges for indicating oil pressure, water temperature, fuel level, hour, and voltage. Warning lights are not acceptable. Indicator lights are not acceptable.• The engine should be capable of swinging outside the chasis for ease of maintenance.5.Hydraulics:

• The main drive, brush drives, hopper dumping system and vacuum fan are hydraulically driven.• All hydraulic components are of premium quality design and have torque controlled hydraulic fittings.• There is a fan-type premium hydraulic cooler.• All hydraulic controls utilize levers linked directly to hydraulic valves.• No switched or touch pads are acceptable.6.Safety:

• The unit is approved by underwriter’s Laboratory.• There is an automatic means to prevent the hopper from being raised when the main brush is operating.• The machine shall be equipped with a light indicating hopper fires.• It shall be equipped with hydraulic brakes.7.Construction / Tires :

• The machine has a unitized construction featuring 3 / 16 inch steel plate / reinforced at stress points.• The front tires are 580 mm in diameter. The rear tire is 530 mm in diameter for a softer side.8. Miscellaneous :

• The machine is equipped with headlights, tail lights, and instrumental lights.• The machine is equipped with power steering with a tilt steering wheel, premium, fully adjustable, soft-ride seat and hydraulic brakes to ensure safe braking.• The machine should be equipped with a wander hose for cleaning from inaccessible areas.

Contd. ………… on page 2.

- 2 –

B. Hand-pushed sweeping machine:

Essential Features:

Description Our Specification i.e. Flipper+Working width with side brush 650 mmWorking width without side brush 460 mmMachine width with side brush 780 mmHeight with Handle 1010 mmCapacity of Hopper 40 LitMax. TheoriticalAtrea Performance 2600 sqm / hr.

C. Power Pressure Jet Cleaner Machine:

Essential Features:

Description Our Specification i.e. FTP 1910MOperating Pressure 30 – 130 barVolume 300 – 600 l/hInlet Water Temperature 50 degree CelsiusPhase / Voltage / Frequency 1 / 230 / 50 f/ V / HzPower 3200 WMotor Speed 1400 rpmDetergent Tank 7.51Electric Cable Length 4.5 mt


period.

Section V

Specification for Microfilming and Digitization of O.P.D. Case Records

Tender No. : Gen/08/2011-12/Misc.

(A) Microfilming :1. Microfilming of Archival quality of Case Record File (written in print, pen or pencil) or drawings of size A3, A4 (generally) in 16 mm, film roll.

There may be some microfilming documents ranging from A0 to A5 also.

2. These microfilm should be assigned code No./Batch No. which will be same as individual Case Record File No.

3. The image should be clear, should not included any distortion or curvature, with adjusted brightness and contrast.

4. The microfilm can be read and printed in a microfilm reader and printer.

5. The retrieval of one record and printing thereof may be shown to take less than 10 minutes.

6. The images should be capable of being embedded in any word processing documents and the job should be carried in the institute itself. You

may be allowed to bring and use machines / personnel and do the job only during working hours of the hospital.

7. Tenderers have to use there own equipment for the required works.

8. Rate should be quoted per frame of A3 size.

9. The pages of one case record will be electronically bound, and each case record will be indexed in the following fields: CRF No. / Name /

Father or Husband name / Age / Sex / District / State / Diagnosis /religion/Caste and a database has to be created compatible with both

windows & Linux platform.

(B) Digitization :

1. Digitization of 16 mm Microfilm in digital format from A3 size microfilm (one frame containing 2 pages).

2. The Digital material will be in PDF format and Software for reading these images to be supplied by you.

3. The pages of one case record will be electronically bound, and each case record will be indexed in the following fields : CRF No. /

Name / Father or Husband name / Age / Sex / District / State / Diagnosis /religion/Caste.

4. One PDF File will contain all the pages in one case Record File. The naming convention of the file will be done as (CRF No.) pdg.

5. The digital images has to be supplied in duplicate DVD and this will be also stored in the OPD Computer hard Disc and in the Server of

this institute.

6. Retrieval Software, Scanned material and indexing will be compatible with our Lotus Domino / Cluster Server and RDBMS and any

other Server with the same configuration and operating system that CIP may install in future.

7. Data base of indexing will be MS Access.

8. Search engine for retrieval will be MS Access.

9. Indexing will be upgradable to any other Digital Format.

10. PDF Format will be convertible to any other format such ZIP.

11. The work has to be performed using your own equipments at your. Thereafter, the digitized materials along with Microfilms will be

handed over to this institute.

12. All Scanning will be done on only the working days in OPD.

13. A software utility for retrieving the pdf files based on the parameters mentioned in Sl. No. 3 should be supplied to enable

searching of the files. The utility shall be based on search using user defined queries based on above parameters.

Vendor must have past experience in Microfilming & digitization of Microfilming.

Section – V

Specifications for Iron Cot



1. Size : 78" (L) x 36"(W)x24"(H), Sleeping Platform 18 guage, M.S. Sheet frame 1¼" dia M.S. pipe 4 legs fitted with rubber shoes, Sheet presetty band over angle iron of 35 x 35 x 5 mm 4nos. mosquito rods of 10 mm.

2. Size : 78" (L) x 36"(W)x18"(H), Sleeping Platform 18 guage, M.S. Sheet frame 1¼" dia M.S. pipe 4 legs fitted with rubber shoes, Sheet presetty band over angle iron of 35 x 35 x 5 mm 4nos. mosquito rods of 10 mm.

3. Warranty should be at least one year.4. The item should be supplied with instruction manual.5. Local office must be in Ranchi.

Section – V

Specifications for Asian E⁺ Tube light



1. Asian E⁺ Tube light Set (Capacity :28 W, Model : 284 SR) embossing with CIP logo, year & running serial number.

2. Warranty should be at least two years.3. The item should be supplied with instruction manual.4. Local office must be in Ranchi.5. Installation, testing & commissioning should be done on site on turnkey basis.

Section – V

Specifications for SMF Battery

Tender No. : Gen/11/11-12/Misc.Essential Features :

1. Supply of SMF Battery (Standard make such as Exide, Amar Raja & Rocket etc.., Model: 100 AH – 12 V, 42 AH – 12V & 7 AH – 12 V)

2. Buy back of SMF Battery (Make : Exide, 100 AH – 12 V, 42 AH – 12V & 7 AH – 12 V)3. The rates for new battery & old battery in buy back must be quoted separately.4. Manufacturer certificate in case of manufacturer or authorization certificate from the manufacturer in case

authorized dealer should be attached.5. Income tax, sale tax and clearance certificate must be attached.6. Attach copy of supply orders in the past and the customers satisfactory certificate in support of past

performance.7. The eligible vendor will be also be registered for the supply of battery in the future. 8. Warranty must be 1 year (at least).9. ISO / CE certified.10. Installation on turnkey basis with installed UPS.

Section – VSpecifications for Gym / Strength equipments

Tender No. : Gen/12/11-12/Misc.A. 16 Station Multi Gym:Essential Features:

1. Chest Press2. Seated Chest Press3. Leg Press4. Leg Squat5. Highlat Pulley6. Single Arm Pulley7. Rowing Pulley8. Butterfly9. Leg extension / curl (Dish weight)10. Chinning 11. Dipping12. Vertical AB / Flex13. Abdominal Board14. Twister15. Wrist Conditioner16. Roman Chair

Powder Coating paint is done after removing rust by the sand blasting. Silent Rubber molded weight, plates as used internationally. Duplication and combination or workouts to give you more exercise and overcome queuing for workouts. Gyms are custom made to suit the site. Pulley’s used in equipments are nylon reinforced with double ball bearing. All moveable parts are used heavy duty nylon bush and ball bearing. 25.4 mm stainless steel rods are used for guide rod. Steel Wire. 50 / 50 mm squire pipe 11 / 12 guage maximum used. Seat Pad made of high density top grade form which provides ultimate durability & good support to workout. Heavy cushioning & leather finish rexin.

B. Commercial Motorized Treadmill

Essential Features:

1. Motor : 5.0 HP AC2. Drive System : Digital Inverter with Flux Vector Control3. Speed: 0.8 KM / HR – 25 KM / HR4. Incline: 0 – 20% Dual axis5. Running Area : 520 mm x 1580 mm6. Display : Multi colour 16 x 48 Dot Maxtrix LED, 6 FND7. Pulse Sensor: Intelligent HRC with touch sensor8. Max User Wt.: 200 Kgs.9. Suspension : Smart suspended cushion10. Deck : Elastic type11. Deck : Elastic type12. Belt : Nylon

Contd. ……… on page No. 2.

- 2 –

C. Elliptical Trainer

1. Double coating chain cover2. Stride length 52 cm.3. Frame material Ms4. Rail Material Aluminium5. Cushioned Footpads6. Pedal Size 52 8 11.2 cm.7. Upper Body included8. Hand Grip Pulse9. Flywheel Dia 242 cm10. Flywheel Weight 14 Kgs.11. Self Generator Type12. Resistance Levels 1613. With water bottle holder14. Console15. Led Display with Dot Matrix Graph Type16. Time, speed, distance, Calories, pulse, resistance17. Programmes etc.


period.

TENDER NOTICE - Central Institute of...

Documents

Transcript of TENDER NOTICE - Central Institute of...