Tender No.1053 / 2020

Bidding Documents SPECIAL INSTRUCTIONS

No Cutting erasing is allowed in the Tender bid.

Bid offered strictly in accordance with the bid document will only be accepted.

Only typed bid will be accepted (no hand written)

Bid Security will be accepted in the form of CDR (Call Deposit Receipt)

THIS IS FOR STRICT COMPLIANCE, FAILING WHICH THE RESPECTIVE BID SHALL STAND CANCELLED

Contact Address: Incharge Purchase Cell

University of Veterinary and Animal Sciences,

Sheikh Abdul Qadir Jillani (Outfall Road) Lahore

Tel: 042-99211449, Ext: 138

TERMS & CONDITIONS

IPL No. 1680 1. The price of this tender document is Rs.1,500/- (Non Refundable)

2. The Tender complete in all respect along with 2% Bid Security of Estimated Price / Cost in the shape

of only “Call Deposit Receipt” (CDR) in favor of “Treasurer, UVAS”, Lahore should reach in

Purchase Cell by 04-03-2020 at 11:00 a.m in the University of Veterinary & Animal Sciences, Lahore.

3.

Lot

No. Description

Bid Security

(Rs)

01 Sr. No. 1 to 5 206,000/-

02 Sr. No. 6 to 20 258,000 /-

03 Sr. No. 21 to 34 334,800/-

4. The quotations will be opened on 04-03-2020 at 11:30 a.m. in Administration Block, Treasurer Office,

Meeting Room No. 116, 1st Floor, University of Veterinary and Animal Sciences, Lahore.

5. The offered price should be inclusive of all taxes.

6. The rate must be quoted only Pakistani rupees

7. Quoted rates must be valid for 180 days

8. No offer shall be considered if it is:

a) Submitted without Tender Document

b) Submitted without Bid Security money.

c) Received after the date and time fixed for the receipt of tenders.

d) Is unsigned

e) Is ambiguous

f) Is conditional

g) Is received by Telegram.

h) Is received with a validity period shorter than the required in the tender enquiry.

i) Does not confirm to general conditions of the enquiry i.e it is not accompanied by sample or

manufacturers literature where required.

j) Is for store materially and substantially different from that required in the tender enquiry.

9. A stamp paper of Rs.50/- will be attached with the bid that the firm is not black listed at PPRA,

suspended or removed in any Government, Semi Government, Autonomous Bodies, Public sector

university and any other Department.

10. In case of warranty 10% amount as security will be deducted from the bills of the firms at the time of

payment and be released as per purchase rules 2005 of the UVAS.

11. The sample may be provided as & when required by Technical Committee.

12. Applicable Govt. levies will be deducted at source from the bill.

13. The equipment / stores supplied by the bidder shall be brand new, in original manufacturer packing

and complete in all respects. Cost of transportation of supplied equipment / goods to the site of

University and cost of installation and commissioning of equipment shall be the responsibility of the

supplier.

14. Supply of material should be made within stipulated period of the Purchase Order positively; in case of

failure the amount of CDR may forfeited and purchase will be made at the risk and cost of the

defaulter or any penalty as per Purchase Rules, 2005 of the University can also be imposed.

15. The buyer shall notify the supplier in writing/through telephone of any defects that occur during the

warranty period. On receipt of such notification/telephonic message the supplier shall attend the

breakdown call within a maximum of 6 working hours.

16. The firm offering prices for supply of machinery and equipment should have sufficient qualified

technical staff and be equipped and having capability to undertake the maintenance or replacement for

the equipment supplied to this University.

17. The bidding documents should be dropped in Tender Box in the office of the Purchase Cell, Room No.

108, 1st Floor, UVAS, Lahore, during five working days till the last date mentioned in tender notice.

18. The successful bidder will submit stamp duty @ 0.25% of the total value of contract / purchase order at

the time of submission of bill to the end user.

19. Bids must be quoted on company’s letter pad duly signed stamped by the bidder

20. Please attach NTN, GST and professional tax certificates with bidding documents.

21. Please attach the copy of your FBR Active taxpayer serial Number list for the current financial

year.

22. Please read, sign all the tender documents, terms and conditions carefully and attached with your

bidding documents.

23. Please clearly mentioned Tender number, company name and address in front of envelop.

24. Please email tender documents positively in MS. Word form in following email I.D.

muhammad.baber@uvas.edu.pk

25. Any further information if required can be obtained during office hour from 8.00a.m to 4.00 pm

(Monday to Friday) from Purchase Cell, University of Veterinary and Animal Sciences, Lahore

We, M/s. ____________________________ hereby certify that we have read and agreed with

all terms and conditions mentioned above.

Signature: ________________________________

Designation: ________________________________

Dated: ________________________________

Stamp: ________________________________

Incharge Purchase Cell

University of Veterinary and

Animal Sciences, Sheikh Abdul

Qadir Jillani (Outfall Road)

Lahore

Tel: 042-99211449, Ext: 138

Tender Documents

Terms & Conditions

Please follow under mentioned terms strictly:

Please fill up proforma(s) instead of putting your own specification (mandatory)

Please quote rates in Pak Rupees.

One can mark additional features in concise way in Last Column, or can attach supporting

brochures. CDs or online links which are helpful for product details may be attached or

provided.

Bidder must be a distributor of quoted product

Bidder must have in house Authorized Service Center

Samples will be demanded as and when required or where applicable

(Lot No1)

S.# Article Qty Specification Origin

1. Embryo

Transfer

equipment with

Accessories

01 Multi-frequency OPU Probe 5.0-7.5-9.0 MHz

with needle guide and pack of 40 Needles.

Multi-frequency Rectal Probe 5.0-7.5-10.0 MHz.

Multi-frequency Convex Probe 2.8, 3.5 & 5.0

MHz.

All above probes must be electronic probes.

Ultrasound frequency range: 2-12 MHZ.

Ultrasound machine with standard 12” Large

LCD Monitor.

Wide range of viewing angle.

Measurement function: For small and large

animals. 256 Gray Scales. Cine Memory 250

frames.

Permanent Image Storage: Internal 100 images

and External USB memory.

Display Mode: B, B/B, B/Z, B/M,M. Depth

24cm.

Ports: USB Port. Built-in two probe connectors.

Backlit Alpha numeric Keyboard with Trackball .

8-TGC Slides with accessories including;

Compatible UPS, B/W Thermal Printer, Local

Trolley, Stabilizer, Dust Cover.

Company must have good back up services.

America/

Canada/Europe

/Japan

2. Walkin chiller

machine 8x8

01 Carcass Carrying Capacity: 2 Tons.

Required temperature 0’C/24hrs.

Required air velocity 1m/s.

Dimension: 20’ x 10’ x 14’ (L x W x H).

Insulation Material: Polyurethane, CFC Free,

Foamed in-place.

Insulation Thickness 100mm (4”).

Internal and external surface of hot-dip

galvanized steel sheet, pre-painted polyester

coating.

Assembling of panels, inclusive fitment of

profiles, Filling and caulking of silicon.

Supply and installation of a sliding door and

door-frame of the Size: 3’ x 8’ (h) complete with

Europe/Germa

ny/Japan or

equivalent

door hardware side rails, door handles etc.

Two Air Cooled Condensing Units Capacity =

5HP x 1 + 3 HP x 1, equipment suitable for

operation on 380V, 50Hz, 3 phase.

Two Evaporator Cooling Units with hot gas

defrosting suitable for operation on 380V, 50Hz,

3 phase. Model KHM 33-2 = 01 Nos. + KHM 21-

1 = 01 Nos.

Two separate electrical temperature monitoring

and control panels.

Installation of refrigeration system including

wiring, piping, pipe insulation between the

evaporator and the condensing unit up to a

distance of 20 feet, inclusive of gas charging and

commissioning.

Trusses and Shade over the room.

Wiring up to the electrical panel of chiller.

Lights.

All civil work of floor of the chiller.

Note: Included Transportation and installation of

the chiller at department of Meat technology,

Cholistan University of Veterinary and Animal

Sciences, Bahawalpur.

3. Processing /

Slaughtering

line (large &

small animals)

01 Overhead railing 2’ diameter M.S pipe, with all

fixture required for cattle slaughtering line. Must

be hot galvanized.

Dimension: Approx. 100 Running feet.

Line mounted Weighing scale to weight animal

carcasses.

Carcass lifter to lift carcass from ground up to the

carcass line.

Rust free Carcass hanging Rolling wheel hangers,

20 Nos. (With food grade stainless steel hooks).

Installation of the line in-place at department of

Meat Technology, Cholistan University of

Veterinary and Animal Sciences, Bahawalpur.

Pakistan/Italy

4. Florescent

Microscope

01 Optical System: Infinity Optical System

Illumination: High luminescent White LED

Illuminator (Eco-illumination) Minimum

Lifetime 55,000 hours

Controls: Image capture button

Eyepiece: 10x with Field of view 22mm

Focusing: Coaxial Coarse/Fine focusing,

Focusing stroke: 30 mm, Coarse: 9.33

mm/rotation, Fine: 0.1 mm/rotation Coarse

motion torque adjustable, Refocusing function

Trinocular tube:

Inclination angle 30° with adjustable inter-

pupillary distance.

3 light path bi/photo: 0/100, 50/50, 100/0.

Nosepiece:

USA / Europe /

Japan or

Equivalent

Reversed Sextuple nosepiece

Objectives:

Plan Achromat 4X N.A. 0.10 or more

Plan Achromat 10X N.A. 0.25 or more

Plan Achromat 20X N.A. 0.40 or more

Plan Achromat 40X N.A. 0.65 or more, Spring-

loaded

Plan Achromat 100X Oil N.A. 1.25 or more,

Spring-loaded

Stage:

Hard coated stage with Cross travel 78 (X) x 54

(Y) mm, with vernier calibrations, stage handle

height and torque adjustable for all stages.

Slide holder for 2 slides.

Condenser:

Achromat Swing-out Condenser, N.A. 0.90.

Polarizer Unit: Simple Polarizer and Analyzer for

Simple. Polarizing microscopy.

Fluorescence attachment with 100 watt mercury

lamphouse.

Fluorescence filter turret 4 or more places for

filters.

Fluorescence Filters: DAPI, FITC, TRITC.

Camera system with imaging and

measurement software

Minimum 5.9 Megapixel Color CMOS Camera

with USB 3.0 connectivity or equivalent

C-mount adapter

Exposure time: 100µ sec to 30 sec

Measurement software to do quantitative and

qualitative analysis.

Imaging software for image capturing, archiving,

analysis, documentation and Measurement.

The software should handle multi-dimensional

imaging flawlessly, with support for capture,

display, peripheral device control, and data

management and analysis.

XLEDs 50", online sinewave UPS 1 KVA with

battery backup (1 hour) (Nos 1)

Fluorescence Software Features:

Overlay Multiple images, Side by Side Image

Comparison, Movie Playback, Tile View,

Snap/Movie Acquision, Time-Lapse at Specified

Interval, Geometry/Combine/Filter Processing,

Region and Line Measurement, Object Counting

(Manual) warranty and free after sale service for

3 years post installation.

Dust Cover.

5. Multi needle

injector

01 Automatic stainless steel 8 needle brine, marinade

injector for chicken, mutton and beef with pump

and pucket.

China

Meat Smoking Machine

Small size smoker to be used for smoking beef,

chicken and fish.

(Lot No 2) 6. Thermocycler 01 The System capacity should be 1x96 well plate

or 96x0.2 ml tubes.

The instrument must be constructed with 3

separate heating/cooling elements below

each of the 3 metal blocks for precise PCR

optimization.

The instrument can be monitored remotely

via android/apple apps or laptop.

Instrument should have 8 inch TFT LCD.

Each pair of heating/ cooling elements and

segmented metal blocks must be insulated

completely from each other to prevent heat

interactions.

The instrument sample ramp rate should be

± 3.0 °C⁄sec

The instrument Peak block ramp rate should be

4.0 C/Sec

The instrument must have a safety feature

that should be designed to indicate to the

user when the sample block is above 50° C.

The instrument reaction volume range should

be 10-80 ul

The instrument temperature uniformity should

be <0.5 °C (20 sec after reaching 95 °C)

The instrument should have high throughput

capability.

10 °C (5 °C Zone-to-Zone with 3 zones)

Software must be included:

Software Specifications: Applications—

Comparative Ct, Standard Curve, Relative

Standard Curve, Genotyping Presence/Absence,

Melt Curve Analysis, high-resolution melt

(HRM) analysis.

Germany/Japan/

UK/USA or

equivalent

7. Thermo-

cycler

01 The instrument should be able to able to support

the full range of Taqman assays.

Optics: 4 emission filters, Blue LED excitation

source, photodiode. 4 targets multiplexing

Temp range: 4-100 C

Peaak block ramp rate: 4.6 C/S

Temp accuracy: 0.25°C (35 to 95°C) of display

temperature

The instrument should be capable to histories

fluorescence from FAM™/SYBR® Green I,

VIC™/JOE™, and ROX™ dyes.

perform Fast PCR reactions in less than 40

minutes

Gene expression analysis, pathogen quantitation,

EU/USA/Japan

SNP genotyping, and presence/absence,HRM.

assays. The instrument can be run in standard as

well as in the fast mode without change in

hardware.

Instrument software should be able to identify the

wells automatically.

The instrument should have a feature of Real-

time monitoring of amplification growth curves to

view run progress (can be viewed from a remote

PC).

The instrument must have 6 segmented insulated

block & each block should be insulated from each

othe.

Block for convenient PCR optimization consists

six independently controllable peltier blocks

together for precise temperature control and

enhanced PCR functionality

The instrument can be monitored remotely

The instrument can be run in standalone mode,

without a computer attached.

The instrument should include a touchscreen

interface that can store protocols for quick run

starts from the instrument without the need for a

computer.

The instrument must be supplied with compatible

software.

8. Water

Distillation

Plant

01 Technical Specifications:

Output: Pure water Type II (analytical grade)

according

ASTM D1193 (American Society for Testing &

Material)

Input: Tap water

Production: 1 l/min (60liters/hour)

Purification process control: By microprocessor

Installation requirements: 120/220V AC + water

supply (≤ 3 m. distance / ≥ 2 bar pressure)

Must be Equiped with Kit of Cartridges

Conductivity < 1 µS/cm

Dimensions (cm): Equipment 45x25x40

(Height/width/Depth)

Weight in operation: 8 kg

Feed Water Requirements

Maximum Pressure 6 Bar

Minimum Pressure 2 Bar

Temperature 5-35 ºC

Requirements:

- Electrical power 120/230 VAC, Plug earth

grounded, within 2 meter of the Micromatic

- Feed water: Should be close (3 meters max),

Pressure 2 bar (min), connector ½” BSP Male.

EU,USA,Japan

9. Water

Distillatory

01 Specifications: USA/EU/Japan

Apparatus

double

distillation

Dimensions: Width, 37 cm (14.6 in.); Height,

28.6 cm (11.3 in.); Depth (without cables), 42

cm

Operating temperature: 18-30ºC (64-86ºF).

Optical System: Up to 6 channels spanning

UV to infra-red wavelengths; Excitation

sources: High

Power: 100–240 V AC, 50–60 Hz,

Samples per run (throughput) Tubes: 0.2 ml;

Strip Tubes 0.1 ml (4 tubes); Rotor-Disc 72;

Rotor-Disc

Thermal performance: Temperature range, 35

to 99ºC; Temperature accuracy, ±0.5ºC (type,

Weight: 12.5 kg, standard configuration

10. Refrigerator

Centrifuge

01 The centrifuge Must be able to accommodate

15,50,ml tubes along with pcr plates.

The instrument must be capable of identifying the

rotor type automatically.

The rotational speed should be 17,500 revolutions

per minute 30,130xg or better.

Temprature range: -11 to +40 C

FastTemp function: quick pre-cooling of the

centrifuge, e.g. from ~ 21 °C to 4 °C in only 8

minutes

Built-in condensation drain: to eliminate water

accumulation in the rotor chamber

The instrument rotor should must have

OptiBowl design.

Brushless maintenance free drive.

The instrument rotor should must have quick lid

lock option which lock the rotor in only ¼ turn

The noise level should be less than 54 Db(A) with

fixed angle rotor.

All the aerosol-tight rotor lids must be certified

by a third certified source.

Should Must have soft brake function.

Additional accessories:

rotor to accommodate 6x15 ml tubes

Rotor for 6x50 ml tubes

1.5/2 ml x 48 tubes

Adaptors for 15 ml

Adaptors for 50 ml

Germany/Japan/

UK/USA or

equivalent

11. Microtome

with

Accessories

01 Fully automatic precision Microtome

Key Features:

2 Specimen feed memory positions

Intuitive control panel

Section counter (Stroke / Distance)

Germany/ Japan

or Equivalent

Spacious, integrated section waste tray

Wide range of accessories

Specifications:

Section thickness setting range: 0.5 – 100 μm

Section thickness selection: 0 - 2 μm in 0.5-μm

steps, 2 - 20 μm in 1-μm steps, 20 - 50 μm in 2-

μm steps, 50 – 100 μm in 5-μm steps

Trimming thickness: 0 – 300 μm

Specimen feed: 28 mm (step motor)

Specimen feed speed SLOW: 75 / 150 / 300 / 600

μm/s

Knife holder - north-south axis: 24 mm

Dust Cover

12. Automatic

tissue

processor

01 Automatic Tissue Processor

Easy loading and full process control by

rotating table principle.

Integrated UPS system protects your

samples.

Delayed start function (Delayed Start time up

to 99 hours).

Operation manual and software if required.

Reagent beakers (Nos 10)

Volume: 2000 ml

Material: White, POM

Electrically heated Paraffin beakers (Nos 2)

Volume: 2000 ml

Material: Aluminum, double walled

Transport basket (Nos 1)

Material: 1x Stainless steel

Volume: 120 cassettes

Programming

20 programs (Freely programmable)

Europe/USA/Japan

/China/Korea

13. Automatic

Stainer

(Histopatholo

gy)

01 Easy loading and full process control

histopathology automatic stainer

12x Staining cuvettes (white, plastic)

2x transport basket (capacity 30 slides)

Operating temperature range: +10 to +35°C

Temperature range during storage: +5°C to

+55°C

Programming: Quick Start, 20 programs (Freely

programmable)

Delayed Start time: up to 99 hours

Integrated UPS system

Dust Cover

Europe/USA/Japan

/China/Korea

14. Operation

Lights

01 1. Human Operation theater lights also

appreciable (3 quantity)

1. Dome Head 712 mm & 550 mm

2. Halogen Bulbs 4V x 70 W x 11 nos

3. Illumination Intensity at 1m 90,000 &

Local/Imported

50,000 Lux

4. Height Adjustment 714 mm & 912 mm

5. Parabolic Reflector 180 mm

6. Color Temperature 4200 K ±300

7. Control Unit Transformer

2. Hot sale stainless steel hand washing sink

for operation theatre hospital (1 quantity)

1, Full automatic induction or foot, touch

water ways, avoid the medical personnel's

hand touch, wash your hands effectively

prevent cross infection.

2, Being equipped with 40-50 L water

heaters and constant temperature water

supply equipment, water temperature can

be used according to the customer's habits

20 °, 75 ° set freely.

3, Pool internal use, seamless welding arc

Angle, depth of grinding, polishing

processing. No dead Angle, easy to clean

disinfects processing, effectively prevent

bacterial growth.

4. The form a complete set of equipment

is perfect, is equipped with automatic

dosing machine, was awarded two

national patents of high-temperature

washing brush and a brush. High

efficiency filter, lighting and ready anti-

fog mirror auxiliary equipment, washing

hands make into enjoyment.

5. A variety of models, multiple series of

products for customers to choose can be

used according to the customer demand

production and processing.

3. Operating Theatre waste bin without push

handle (3 in quantity)

Operating room waste bin

Material: Stainless steel

Capacity: 15 litres

∅ foot chassis: 45cm

4 castors with a ∅ of 5cm

Available with or without push handle

Height without push handle: 42.5cm /

Height with push handle: 82.5cm

4. Automatic washing machine 13 Kg one

quantity washing capacity along with 100 large

sized towel (1 quantity)

15. Water purifier

with UV lamp

04 Tap to pure and ultra pure water purification

system (100V-240V/50-60Hz) ultra pure (type 1)

product water quality resistivity 18.2MΩ.cm@25

C, production flow rate 3-5liter @25 C+ 15%.

Instant flow rate (with applilcations pak final

filter). >0.5 liters per minutes

TOC (w/o 185/254nm UV lamp) <10ppb

TOC (with 185/254 nm UV lamp) <5ppb

Particulate (size >0.22 um) < 1 particulate /ml

Bacteria <0.1cfu/ml

Endotoxins (pyrogens)<0.001 EU/ml

RNases<0.01ng/ml

DNases<4pg/ul

One extra consumable packages should be

included

Any other accessories /software required the

operation of equipment

Warranty and free after sale and services for 3

years post installations

Allied accessories

power supply

All accessories needed for installation

Services and repair facilities should be available

in Pakistan

Dust cover

China/Local

16. Dissection

Microscope

Stereo

05 Specifications

Other features:

Stable cast iron round base with pillar

focusing with rack & pinion.

Accurate and stable metal stage covering with

glass plate with clips.

Eye Piece: Optical Tube 10x, 20x mounted on

jointed arms allowing to whole area to be

scanned.

Complete in box

Magnification 20

Power Supply Power plug

Lighting Incident light and transmitted lig

ht

Lamp type 12V/ 10W tungsten lamp

Image scale 2

Type of build binocular

Germany/ Japan

or Equivalent

17. Vacuum

pump with

filtering unit

03 Vacuum system for evaporation and distillation in

combination with rotary evaporators and gel

dryers.

Capacity:

Minimum pumping speed @ 50/60Hz - 16/18L/min

(pump without oil)

Ultimate pressure: < 8mbar

Vacuum control: Manual

Vacuum gauge: Digital

Overall dimensions (L x W x H) – 360x310x445 mm

All accessories with filter unit, 0.2 μm

hydrophobic PTFE, 10/pk, Tubing , Vacuum

filtering flask, 1 L , No 8 stopper, 9.5 mm (3/8

in.) hole, silicone, 5/pk

18. Filtration

Assembly

(Glass)

02 100% borosilicate glass with fritted glass filter

base.

Anodized Aluminium spring clamp

Suction capacity/filter diameter: 47 mm

Effective filtration area: 9.6 cm2

Funnel capacity: 300 mL

Flask capacity: 500 mL/Liter

Europe/USA/Japan

or Equivalent

19. Deep freezer

02 Specifications:

Required Temperature: -20°C to -40oC

Effective capacity 482 Liter.

Two chamber Vertical Freezer Defrosting, Fast Freezing , Icebox

Connection Power 230/240V 50Hz

China/Local

20. Autoclave

Vertical

04 Vertical Autoclave (02)

Horizontal Autoclave (02)

Digital Microprocessor Controlled unit,

Temperature Range 105 to 135º C

Interior Chamber Stainless steel,

capacity 65 Lit capacity (chamber dimension: 400

x 500mm),

with Built in Timer 1 to 250 Minutes, Pressure

Gauge 0 to 0.4 mpa,

Selected Modes for Liquid and Solids,

Forced cooling Fan as standard function, Drain:

Temperature-resistant installation (103˚C in case

of failure),

Temperature controlled at 70˚C (setable) Drain

height max. 40cm above the floor, High

Temperature/pressure cut-off, sensor wire

breakage detector.

Securely closed lid check function.

Local/Imported

Electric leakage breaker and over current

detector.

Pressure Safety valve.

Exhaust bottle ready-to-use check system. Lack-

of-water prevention device.

Warranty and free after sale service for 3 years

post installation,

Dust Cover,

(Lot No 3) 21. Laboratory

Egg

Incubator

01 Automatically Alarming Eggs Turning Humidity

Control Egg Incubator. Technical Parameters: The

edge covered by aluminum alloy. Hatching Rate~94%;

Temperature Range~0~98.9ºC; Temperature

Precision~±0.1.5ºC; Humidity Range~0~98.9%RH;

Humidity Precision~±4.9%RH LCD Display~ Real -

time and Setting Temperature/Humidity; Alarm ~

Audio and visual alarm for: High or low temperature,

high or low humidity

22. Egg candlar

(2+3)

02 Portable LED battery/mains operated egg candling

lamp.

It must allow the user to candle both white and brown

eggs in any environment.

Specifications:

LED : 10 Watt

Max Output (Luminous Flux): 1000 Lumens

LED life : 50,000 hours

Battery : Lithium ion battery, 4400mAh

Battery Run time : 180 minutes (100% brightness)

Battery lifespan : Rechargeable 500-800 times

Power supply : 110-230 V

Dust cover

Europe/USA

/Japan or

Equivalent

23. Egg

incubator

01 Specifications:

Material;

Outer Body: M.S Sheet and Powder Coating Painted

Heavy Gauge

Inner Body: S.S Sheet 304 or Aluminum Sheet

Egg incubator Numbers of trays ≥10

Capacity:

500 eggs

Temperature control 25 to 70° C

Digital Timer: Tilting Control Automatically and

control by Digital Timer

20 to 75 % Humidity control

Automating Turning of eggs

Power Supply: V220 - 230

Frequency: ~50-60Hz

Dimensions: 5ft L x3ft W x 6ftH

Dust Cover

Europe/USA

/Japan or

Equivalent

24. Electric

De-beaker

01

By chain bar drive components a built-in Low-speed

motor drives electric thermal movable blade up and

Local/Import

ed

down, and automatically fix position with beak cutter

blade in order to trim beak quickly and stop bleeding in

time. Temperature of movable blade should be

adjustable to be reddish or nacarat.

Voltage – 220 V

Temperature range of movable blade :700-900°C

Beak trimming rate :1800pcs/hr

Blade stoping time :0-4seconds

Redish time: <30seconds

25. Chick sexer

(sexoscope)

01 Exposure time 1/160 sec (0.00625)

F-number f/2.8

Lens focal length 5.8 mm

Orientation Normal

Horizontal resolution 180 dpi

Vertical resolution 180 dpi

Y and C positioning Centered

Exif version 2.2

Image compression

mode 5

APEX shutter speed 7.3125

APEX aperture 2.96875

APEX exposure bias 0

Maximum land

aperture 2.96875 APEX (f/2.8)

Metering mode Pattern

Flash Flash did not fire, compulsory

flash suppression

Supported Flashpix

version 0,100

Color space sRGB

Focal plane X

resolution 4,571.4285714286

Focal plane Y

resolution 4,571.4285714286

Focal plane resolution

unit inches

Sensing method One-chip color area sensor

File source Digital still camera

Custom image

processing Normal process

Exposure mode Auto exposure

White balance Auto white balance

Digital zoom ratio 1

Scene capture type Standard

Local/Import

ed

26. Fodder

Chopper

01 Capacity: 10ton/hour; Cut Size: 5 to 20mm

(adjustable); Number of cutting blades: 6; Required

electric power: 20hp; Operative version: Electric; Two

extra gears to adjust the size of chopped forage;

Cutting wheel RPM 999; Main frame: heavy duty mild

steel channel; Hitch: heavy duty milk steel box

27. Head

Catcher/Hea

d Locks

02 8 head locks (sub-unit) in each unit head lock; Clump

3mm width; Total nut bolt SS-304 material (non-

magnet); Height 3 feet; Width 2 feet/unit; Neck rail 12

gauge pipe; For post pipe quality of IILM- pipe

28. Shower

System

02 To be installed in animal shed of length of 90 feet and

105 feet long: Motor pump: 5hp; 1.5 inch PVC pipe D

class; Tank 1000 gallon; Mist nozzle (plastic) × 40; DP

box/control panel

29. Sample

grinder

01 Laboratory Mill/sample grinder

Features:- Must have Dust protected main safety switch

Gearless speed control

Illuminated speed- and status display

Funnel with hinged lid

Refilling during operation is possible depending on the

product

Tight-fitting stodger in grinding chamber for

subsequent application of pressure

Tool free sieve change

Motor must stop when opening grind chamber

Technical Specifications

Funnel volume

300 ml

Product discharge

For collection tubes with norm grinding

NS29

Sieves

0.2 to 6 mm mesh size

Grinding attachments (convertible)

Hammer attachment

Cutting attachment

Motor

Wear-free three-phase motor

Gearless direct drive

Security system auto-off

Drive power

1000W

Speed range

50 to 6‘000 rpm

Sound level (without load)

70 dB(A) for 6‘000 rpm

Supply voltage

100 - 230 V ± 10%, 50Hz / 60Hz

China/Local

Maximum relative humidity

80 % in storage

80 % during operation

Operating temperature

0 – 40 °C

Protection class according to DIN

IP 20

Dimension (L x W x H)

325 x 251 x 480 mm

Allied accessories

All accessories needed for installation

Services and repair facilities should be available in

Pakistan

Dust cover

30. Egg

Incubator

with setter

for 2000-

2592 eggs

01 Setter:

Machine which is designed by high grade

material including many stainless steel internal

components.

Numbers of layers ≥10

Capacity 2592 eggs of Gallina, Anatra,

Germano, Hen, Duck and Mallard, 3528 eggs of

Fagiana and Pheasant, 6120 eggs of Starna,

Quaglia ,Partridge and Quail, 4536 eggs of

Pernice rossa and Red leg , 1800 eggs of

Tacchina and Turkey, 1008 eggs of Oca and

Goose,

Precision of temperature control ≤±0.1C

Temperature and Humidity control and Digital

control with all types of setting trays ,

Automating Turning of eggs ,

Power Supply V220 - 230~50-60Hz ,

Dimensions 5ftLx3ftWx6ftH,

Net Weight 197kg, Package; 1

unit/carton/wooden box,

Application: farm and laboratory;

Warranty and free after sale services for three

years post installation

Hatcher:

Hatcher Machine which is designed by high

grade material including many stainless steel

internal components. Temperature and humidity

digital control

capacity 864 eggs of Gallina, Anatra, Germano,

Hen, Duck and Mallard, 1176 eggs of Fagiana

and Pheasant, 2040 eggs of Starna, Quaglia,

Partridge and Quail, 1512 eggs of Pernice rossa

and Red leg, 600 eggs of Tacchina and Turkey,

336 eggs of Oca and Goose.

Power Supply V220 - 230~50-60Hz,

Dimension 3.3L x 3.3Wft x 4.1ftH

EU/Japan/

USA

Net Weight 120Kg

31. Feed Mix

Van

01 Feed Mixer Van (TMR wagon)

Digital display scale

Feed mixing capacity = 2 tonns

Augers = vertical

Number of augers = 2

Distribution type = Right and left side delivery

Power requirement PTO (HP) =60-75

Can be linked to TMR software

Additional accessories to connect with tractor =

connecting materials along with hydraulic kit

Turkey/

Europe

32. Hay Balers

01 Round balers

Pick-up width = 2.10 meter

Crop feed = HD ROTO CUT

Number of knives= 25 (0, 12, 13, 25)

Number of rollers = 16

Bale diameter= 1.25–1.35 meter

Bale ejector= Standard

Automatic chain lubrication Standard

Europe/USA

/Japan

33. Bailer press 01 Bale press

Hay bale double compress

Double hydrallic

Mobile type

Finished bale size

Length=25 inches

Width=18 inches

Height =18 inches

China/ locally

manufactured

34. Necropsy

Table

(Hydraulic

operated)

01 Hydraulic Postmortem Table (Large Animals)

Size: 8 x 4feet

Material: Stainless steel

Jack system with foundation and shocks against 800Kg

weight

Drain system with back side slope

2 Tap for washing system

Fork lifter

Loading capacity minimum 3000 kg (3 ton)

Lifting height capacity from ground level to 6 feet

Power source: Diesel/Electric

Local/Imported

Technical Evaluation Criteria:

The Bidders who have duly complied with the Eligibility / Qualification and Evaluation Criteria will

be eligible for further processing.

The Bids which do not conform to the Technical Specifications or Bid conditions or Bids from the

Bidders without adequate capabilities for supply of Goods/Items/Services will be rejected.

The Eligible/Technically Qualified Bidders will be considered for further evaluation.

The Technical proposals shall be evaluated by the technical evaluation committee in the light of

following evaluation criteria as per PPRA Rules:

Category

Description

Points

Legal (Mandatory)

Certificate of Company/ Firm Registration /

Incorporation under the laws of Pakistan.

Mandatory

Valid Income Tax Registration. Mandatory

Valid General Sales Tax Registration (Status =

Active with FBR as on the date of submission)

Mandatory

Submission of undertaking on legal valid and

attested stamp paper that the firm is not

blacklisted by any of Provincial or Federal

Government Department, Agency, Organization

or autonomous body or Private Sector

Organization anywhere in Pakistan.

Mandatory

Compliance to the technical specifications of all

items to be procured.

Mandatory

Eligibility Criteria Must have 3 Years’ Experience as Authorized

Distributor / Dealer of the quoted product.

Mandatory

Minimum 5 Deployment for the Same Class of

Equipment with Govt. / Semi Govt. / private

Departments and public sector.

Mandatory

For warranty and after sales support a parts

hub/storage facility should be in Pakistan

Mandatory

Note:

Verifiable documentary proofs for all above requirements are mandatory.

Vendors/ Suppliers will be responsible for installation, inspection, demonstration and

configuration of the supplied equipment in client environment as per client's requirements

Brand and Model Number of quoted equipment must be mentioned.

Technical Brochures of quoted equipment must be attached with bid.

Software required to run the equipment must be supplied by vendor where applicable.

PARAMETERS OF TECHNICAL EVALUATION CRITERIA The Firm/Company securing less than 70% marks will be disqualified

Total Marks 100 Qualification Marks 70 (70%)

Firm has to Produce Income Tax Registration and General Sales Tax Registration.

Firm must have 3 Years’ Experience as Distributor/ Dealer of the quoted product for Pakistan.

Firm Must have office in Pakistan.

Category Description Marks

Legal (Mandatory)

Certificate of Registration/ Incorporation 5

Income Tax Registration 5

General Sales Tax Registration 10

Undertaking that the firm is not blacklisted and

involved in litigation with Government

5

Must have 3 Years’ Experience as Distributor// Dealer

of the quoted product.

10

Relevant Experience

3 to 8 years 5

9 to 14 10

15 and above 15

Financial / Experience

Audited Annual Net

Turnover

(Max Points 10)

Rs. 10-25 million 2.5

Rs. 26-50 million 5

Rs. 51-100 million 7.5

Rs. 101 million or above 10

Audited Financial Reports

(Max Points 7.5)

For the Past 3 Years 2.5

Marks for Each Year

Income Tax Returns

(Max points 7.5)

For the Past 3 Years 2.5

Marks for Each Year

Number of items (Supply

of Relative equipment to

Government / Semi

Government, Public

Sector) in the Past 3 Years

(Max Points 10)

1 - 3 2

4 - 6 4

7 - 9 6

10 - 12 8

13 or above 10

Human Resource

Total No of Technical

Employees (Max Points

10)

0 – 5 3 Points

5 – 10 6 Points

11 or above 10 Points

Company Website Accomplished with Complete Products specification

and Details (Max Points 10)

10 Points

Government /

Semi Government Projects

At least 05 similar or above nature Projects worth of

Rs. 3 Million and above in Government / Semi

Government Departments in last three years.

(Max Points 10)

10 Points

(02 Marks for Each

Project)

Delivery at Cholistan University of Veterinary & Animal Sciences, Bahawalpur

Qaisar Iqbal

Project Manager (F&P)

CUVAS, Bahawalpur