1

TENDER DOCUMENT

FOR

RELOCATION/REFURBISHMENT OF SERVER ROOM

PAKISTAN NUCLEAR REGULATORY AUTHORITY ISLAMABAD

2

TENDER DOCUMENT

(A) INSTRUCTIONS:

a) It is in the interest of the bidder to read all the conditions given below and ensure that these conditions are complied with.

b) The bidders should visit the site before submitting the quotations, for site visit contact PE (CWG), PNRA HQ's Islamabad.

c) Technical and financial bids must be submitted separately in sealed envelopes. Technical bids will

be opened on the date and time published in the advertisement i.e. 24/01/2019 on 11:30 Hrs at

PNRA HQs G-8/1, Islamabad in the presence of those bidders who wish to attend. d) Financial bids will be opened within (15) days after evaluation of technical bids at the date and

time communicated to the bidders through email/postal mail, in the presence of all those who wish

to attend. e) Quotations must be sent in sealed envelope and should be addressed to “Senior Administrative

Officer Procurement, Pakistan Nuclear Regulatory Authority, Mauve Area, G-8/1, Islamabad”.

The sealed envelope/cover should clearly indicate “QUOTATIONS FOR

RELOCATION/REFURBISHMENT OF SERVER ROOM T # 06/2018-19”.

(B) CONDITIONS:

a) Bidders should be registered with FBR for all applicable Govt. Taxes.

b) Earnest money @ 2% of the total price of the offer in the shape of pay order/bank draft in favor of

“Senior Accounts officer, PNRA HQs, Islamabad” should be attached with the quotation.

Quotations without or less than 2% earnest money will summarily be rejected.

c) Quoted prices should be in Pak Rupees for supply & installation at PNRA HQs Islamabad, and

should be inclusive of all applicable Government Taxes. All taxes will be deducted as per G.O.P.

rules.

d) Earliest execution of work is required. The successful bidder shall have to execute and complete

the job within 120 days after the issuance of Work Order.

e) The quotations must be valid for acceptance for at least sixty (60) days from the date of opening of

the tender.

f) Incomplete and conditional quotations will be rejected outright.

g) Single Stage-Two envelope procedure will be followed and Firms/suppliers are required to submit

the Technical Proposal and Financial Proposal in separate sealed envelopes. Evaluation of

Technical bids will be done within (45) days after opening of the tender.

h) An amount equivalent to 10% of the total price of the bid will be retained till the successful

completion of the maintenance/warranty period of the work/items supplied i.e. One Year. During

this period, if the work done is found to be defective, the supplier is liable to rectify the defect.

Moreover, if any component/equipment supplied/installed is found to be defective the supplier is

liable to replace it. Failure to do so, the authority reserves the right to utilize this amount to rectify

the defects.

i) The decision to increase the job completion time of the selected firm lies with PNRA and this will

be granted subject to provision of sufficient justification by the firm.

j) PNRA reserves the right to increase/decrease the quantity or accept/reject any or all tenders

without assigning any reason thereof.

k) Technical submittals shall have to be provided for all the equipment for approval.

l) All the items supplied/installed should be brand new in manufacturers packing, or properly

assembled and should bear the manufacturers standard warranty/guarantee (if applicable).

Warranty should be valid throughout Pakistan.

m) During evaluation, any firm found to be indulging in providing any false statement

/documents/malpractice, is liable to be disqualified. n) In case the work is not carried out within the specified time,Rs. 5,000/- per day will be charged as

liquidated damages.

o) The rates and prices quoted by the bidders shall be final. No escalation will be paid under any

circumstances whatsoever during the performance of the Contract.

3

(C)BILL OF QUANTITY:

Sr.# Description Qty. Unit Unit Rate

(Rs.) Amount (Rs.)

A Electrical Works

1 Supply &Wiring for 3-Pin, 5A Socket (Make:

Clipsal or MK) from point to DB with 3-2.5mm².

S/C, PVC insulated, Cu cables in 40x40 Dura Duct

at wall or as required. Complete in all respect with

all accessories and sockets.

30 No

2 Supply & Wiring for 3-pin, 20A, S/Socket (Make:

Clipsal or MK) from point to DB with 3-4mm²

S/C, PVC insulated, Cu cables in 40x40 Dura Duct

in the wall or as required. Complete in all respect

with all accessories and S/Sockets

15 No

3 Supply & Wiring for 3-pin, 32A Industrial Socket

(Make: Clipsal or MK) from point to DB with 3-

6mm² S/C, PVC insulated, Cu cables in 40x40

Dura Duct in the wall or as required. Complete in

all respect with all accessories and Industrial

Sockets

8 No

4 Supply & fixing (with 3 meter cable, flexible

conduit and PVC connector) of 15 W Astra Slim

round panel LED light for false ceiling in day light

color, complete in all respect with accessories.

Make: Philips or approved equivalent

30 No

5 Supply, laying and termination of PVC insulated

Copper Conductor 600 / 1000 V grade single Core/

multi-color Cables. Make: Pakistan Cables,

Fast or Newage

a 4-Core, 6 sq.mm PVC/PVC. 100 rft

b

4-Core, 10 sq.mm PVC/PVC. 100 rft

c 4-Core, 16 sq.mm PVC/PVC. 60 rft

6

Distribution Boards & Panels as under :

Providing, installing, connecting & commissioning

of the following Distribution Boards (DB)

fabricated with 14 SWG steel clad, cubical design

with hinged door cover, wall mounted, factory

assembled, suitable for 3 phase, 4 wire, 500 volts,

50 Hz A.C. Power Supply complete with copper

cable lugs, glands, neutral link, earth block, terminal

block, busbars etc., & having following

configurations. (All equipment rated to 7.5kA short

circuit rating and 50°C ambient temperature at

415V). Panel enclosure to comply with IP-50.

Switchgear Make: Schneider or approved

equivalent.

4

a

DB (AC)

1 No.

Incoming

1 -150 A, T.P., M.C.C.B - (Adjustable) 3 - Indication lights

3 – Fuses

Outgoing

3 - 30 A, T.P., M.C.C.B

3 - 20 A, S.P., M.C.C.B

b

LPDB (Server Room)

1 No.

Incoming

1 -100 A, T.P., M.C.C.B - (Adjustable) 3 - Indication lights

3 – Fuses

Outgoing

12 - 10 A, S.P., M.C.C.B

05 - 16 A, S.P., M.C.C.B

05 - 20 A, S.P., M.C.C.B

08 - 30 A, S.P., M.C.C.B

c

DB (Tech. Room)

1 No.

Incoming

1 -100 A, T.P., M.C.C.B - (Adjustable) 3 - Indication lights

3 – Fuses

1- VOLT METER 500V WITH SELECTOR

SWITCH

Outgoing

5 - 25 A, S.P. M.C.B

06 - 20 A, S.P. M.C.B

12 - 10 A, S.P. M.C.B

Total =

B Fire Suppression System

1 Supply and Installation of Fire suppression system

with Schedule 40 piping/Cabling, Ducting &

Commissioning along with following allied

equipment, complete in all respect. Make:

NOVEC 1230, UK or approved equivalent

a Fire Suppression Control Panel, Sigma XT with

batteries. KENTEC – UK 1 No.

b Optical Smoke Detector with base. ZITON - UK 6 No

c Fire Alarm Bell. ZITON - UK 1 No

d Fire Alarm Sounder with Flasher. ZITON - UK 1 No

e GSM Module. Make: European 1 No

5

f Abort Switch 1 No

g Discharge Nozzle. SEVO-USA 4 No

h Suppression Gas, NOVEC-1230 484 Lbs

i Gas Cylinder 601 Lbs with accessories. SEVO-UK 1 No

Total =

C HVAC Works

1 Supply, installation and commissioning of imported

floor standing cabinet type split AC units (cooling

only) , including indoor evaporator and outdoor

condensing unit, remote control, flexible wire for

sensor (Control cable), to be protected by flexible

GI pipe, of appropriate size as per manufacturer's

recommendation for indoor / outdoor units, earthing

etc. of the following net capacities, complete in all

respects and as approved by the Engineer.

Make: Daikin, Mitsubishi, York, LG, Toshiba, and

Hitachi.

Note:

a)The technical data sheet in original giving

technical specifications of the items quoted should

be submitted with the quotation.

b) Cost of extra gas charging for refrigerant piping

up to any length to maintain the desired pressure

(recommended by the manufacturer) for optimum

performance of AC units shall be incorporated in

the quoted price of AC units.

a). 4 TR 2 No.

2 Supply, installation and commissioning of imported

wall mounted split AC units, including indoor

evaporator and outdoor condensing unit , remote

control, flexible wire for sensor(Control cable) of

appropriate size as per manufacturer's

recommendation for indoor / outdoor units, earthing

etc. of the following net capacities, complete in all

respects and as approved by the Engineer.

Make: Daikin, Mitsubishi, Yark, LG, Toshiba, and

Hitachi.

Note:

a) The technical data sheet in original giving

technical specifications of the items quoted should

be submitted with the quotation.

B) Cost of extra gas charging for refrigerant piping

up to any length to maintain the desired pressure

(recommended by the manufacturer) for optimum

performance of AC units shall be incorporated in

the quoted price of AC units.

i). 1.0 TR (12,000 BTUs, Reversible) 1 No.

ii). 1.5 TR (18,000 BTUs, Reversible) 1 No.

iii). 2.0 TR (24,000 BTUs, Reversible) 3 No.

6

iii). 2.0 TR (24,000 BTUs, Cool only) 2 No.

3 Supply, installation and testing of refrigerant piping

complete with fittings & hangers etc., 20 SWG

copper pipes, make Mullar, with indoor / outdoor

units with 1" thick expended rubber foam insulation

protected with tape, complete in all respects and as

approved by the Engineer.

i). 3/4" dia. 75 Rft

ii). 5/8" dia. 150 Rft

iii) 1/2" dia 75 Rft

iv). 3/8" dia. 150 Rft

iv). 1/4" dia 100 Rft

4 Supply and installation of MS angle iron frames for

condensing units to be installed on walls / roof

terraces etc. of appropriate size, painted with

approved color, complete in all respects and as

approved by the Engineer.

9 No

5 Supply and installation of 3/4" diauPVC pipe for

condensate drain from indoor unit to drain point

including all fittings, traps, hangers etc. with 1"

thick expended rubber foam insulation protected

with tape., complete in all respects and as approved

by the Engineer.

200 Rft

6 Supply and installation of Dura duct of the

following sizes as per site requirement complete

with fixing arrangements, complete in all respects

and as approved by the Engineer.

i). 100 mm × 100 mm 120 Rft

ii). 60 mm × 60 mm 150 Rft

7 Civil works associated with AC works like cutting

of walls & slabs etc. and repairing as per original,

wherever required, complete in all respects and as

approved by the Engineer in charge.

1 Job

8 Removal of existing installed fan coil unit 1 Job

9 Supply and Installation of Air Purifier of capacity

300 m³/H with HEPA Silent filters, 4-blades and

noise level maximum of 60 dB. Make: Gree, Philips

or approved equivalent.

2 No

Total =

D Civil Works

1 Dismantling of the following, clearing the area and

finishing the surface, disposing the dismantled

material/piling up of material as directed by

Engineer:-

a) Aluminum partition walls/doors. 598 Sft.

b) Brick masonry walls. 176 Sft.

c) 12 mm thick frameless partitions. 110 Sft.

7

2 Providing and laying approved First Class Burnt

Bricks Masonry in super structure walls at any

height and any floor, laid and jointed with cement

and Lawrencepur sand machine mixed mortar,

masonry to be laid in courses true to line, level and

plumb, protected and properly cured including

scaffolding and providing deep joints to receive

rendering, complete in all respects and as directed

and approved by the Engineer.

- - -

230 mm thick in (1:6) CSM 990 Sft.

3 Providing and laying 1/2" thick cement plaster 1:3

on walls/soffit/beams/columns/ceiling with finish as

specified by Engineer. 1980 Sft.

4 Frameless Glass Partition: Providing and fixing at any floor at any height 12

mm thick plain glass full height frameless partitions

fixing with 3/4”x 3/4” aluminum U- Channel at top

with gasket and 4" high 2 mm thick aluminum

section at bottom, true to plumb and beveling of

exposed edges, complete in all respects as per

drawing and as approved by the Engineer.

450 Sft.

5 Frameless Glass Doors: Providing and fixing of 12 mm thick plain frameless

glass doors with floor mounted imported door closer

(hydraulic machine) of approved make and top

pivot, including fixing 4” high 2 mm thick

aluminum section at bottom, with gasket, best

quality door handles, locks, beveling of exposed

edges, complete in all respects as per drawing and as

approved by the Engineer

25 Sft.

6 Frosting: Supplying and fixing good quality frosting tape as

per approved design/make with minimum 4 ft.

width to glass partitions and doors where required,

complete in all respects as directed and as approved

by the Engineer

310 Sft.

7 Providing, laying & fixing of high pressure laminate

raised access flooring for data center with services

corridor complete in all respects and as directed and

approved by the Engineer Description: Modular panel composed of wood-

core particles bound together by heat hardener

resins to guarantee high homogeneity of mechanical

characteristics and dimensional stability. Top Finishes: HPL Laminate with antistatic coating. Bottom Finishes: Aluminum Sheet -0.05mm aluminum sheet to

guarantee barrier against humidity, fire and

electrical continuity to the floor. Laminate-Phenolic laminate sheet to improve the

rigidity of the panel, its mechanical characteristics

and to constitute a barrier against humidity. Steel tray/Steel sheet -0.5 mm galvanized steel

650 Sft.

8

plate to protect the panel from humidity and fire Edge: ABS Protective material in similar colors top

finish for minimal joint effect.

8 Providing and applying roller applied Plastic / Matt

emulsion paint of approved make and shade on wall

/ ceiling at any height, as following, including

rubbing the surface to smooth finish, removing

undulations, complete in all respects and as directed

and approved by the Engineer.

- -

a) 2 x coats of paint over 1 x coat of alkali resisting

primer & 2 x coats of putty as approved. 990 Sft.

b) 2 x coats of paint. 2760 Sft.

9 Providing and fixing 600mmx600mm size 12mm

thick Laminated Gypsum Board false ceiling panels

placed over high grade steel skeleton i/c

wall/column molding main and cross "T" bar

framing having self-locking clips, nails and screws,

sections powder coated in approved color.

suspension system consisting of G.I. adjustable

hangers of 8 SWG, stiffeners, expansion bolts

including provision of lights, A.C Grills, fire alarm

detectors, fire sprinklers, complete in all respect as

directed by the Engineer.

650 Sft.

10 Workbench:

Providing, manufacturing and fixing of

racks/cabinets fixed to wall 750 mm high and 600

mm deep made with two shelves of 32 mm thick

approved lamination board with PVC edging, one at

top and other at bottom raised about 100 mm above

the floor and consisting of 30 x 60 mm Partial wood

frame (2' c/c horizontally and 1' c/c laterally) under

the shelves supported firmly with wall and/or floor.

Top shelve to be fixed with wall and free end to be

supported with two 50 x 50 mm Partial wood

supports at 4' c/c, including spirit polish on wooden

frame, complete in all respects and as approved by

Engineer.

32 Rft.

11 Providing and fixing 3/4 inch thick laminate board

over windows to cover them against light and

intrusion of rodents, hinged (1st class copper) with

30X60 mm Partal frame running on edges of

windows for support, border of soft wood on each

side for finish, complete with all accessories and as

directed by Engineer.

110 Sft.

12 Providing and fixing Malaysian Skin solid core

flush door shutter (1-1/2" thick), deodar wood

chowkhat/frame (2"X7"), door lock, stopper,

hardwares etc. and painting/polishing, etc. with all

accessories, complete in all respects and as

approved by the Engineer.

85 Sft

13 Dismantling and re-installation of existing

aluminum-lasani partition as directed by Engineer. 300 Sft

9

14 Supply and installation of aluminum Sliding

window of anodized Aluminum extruded section

with frame, complete with all accessories like lock,

mosquito mesh etc.

12 Sft

15 Supply and installation of 5 mm green tinted glass

fixed to aluminum window with rubber gasket ahd

water tight seal complete in all respect. 12 Sft

Total =

E CCTV System

1 Digital Video Recorder (DVR) 1 No

a Brand: Samsung, Sony or equivalent

b Frame Rate (NTSC / PAL): 480 fps / 400 fps

(minimum)

c

Max. Record Rate: 480 fps / 400

fps@1920x1080 (NTSC / PAL) (minimum)

d Video Compression: H.264

e Video: 16 CH (Input) (minimum)

f Audio: 16 CH (Input), 1 CH (Output) (min)

g Display Output: VGA, HDMI

h Multiple Screen Display: Supported

i

Storage: 2 TB Installed (minimum), Supports

2x Internal SATAHDDs

j

Backup / Export: USB, Network, Internal and

External USB ODDs

k

Connections / Ports: USB, Network, e-SATA,

Coaxial (Pelco-C, ACP)

l

Recording: Continue, Motion, Alarm, Continue +

Motion

m Search: Calendar, Date/Time, Event, Bookmark

n Security: Password Protection

o Firmware Update: Supported

p Warranty: 1 Year (Labor and Parts)

All the necessary cables, bundled software and

accessories must be supplied

2 CCTV Camera 6 No

a Brand: Samsung, Sony or equivalent

b Resolution: 2 MP (minimum)

c Imaging Device: 1/2.9”, 2M CMOS (minimum)

d Resolution: Full HD (1920 x 1080), 30fps (min)

e

Focal Length: 2.8 ~ 12mm, Variable Focal

(minimum)

f

Illumination: 0.11 Lux (Color), 0 Lux (B/W)

(minimum)

g Digital Wide Dynamic Range: Yes

h Motion Detection: Yes

i Digital Image Stabilization: Yes

j Digital Zoom: Yes

k Digital Noise Reduction: Yes

10

l Backlight Compensation: Yes

m Day & Night: Yes

n Privacy Masking: Yes

o Communication: Coaxial (Pelco-C, ACP)

p Warranty: 1 Year (Labor and Parts)

All the necessary cables, bundled software and

accessories must be supplied

3 Monitor for CCTV System 1 No

a Brand: Samsung, LG, Panasonic or equivalent

b Screen Size: 27 inch (minimum)

c Resolution: Full HD (1920 x 1080) (minimum)

d Video In/Out: 2/2 (minimum)

e RGB In: Yes

f HDMI: Yes

g Audio In: Stereo

h Aspect Ratio: 16:9 (minimum)

i Built-in Speakers: Yes

j Sync Format: NTSC / PAL

k Warranty: 1 Year (Labor and Parts)

All the necessary cables, bundled software and

accessories must be supplied

4 CCTV System (Miscellaneous)

a Coaxial Cable: TFC, Belden or equivalent brand,

RG-6 standard 1 Roll

b

Power Cable: Pakistan Cables or equivalent

brand, 02 cores 1 Roll

c 12U Rack: Yes 1 No

d BNC connectors (Imported): Yes 20 No

e HDMI Cable: Yes 2 No

All cameras, power and other allied accessories

must be supplied. Installation of cables in PVC

pipes/duct including cables charges and

commissioning charges must be included.

Total =

F Biometric Access Control (Door Locking System) 1 No a Brand: Suprema or equivalent

b Application: Access Control

c Authentication Mode: Finger Print, Card,and

PIN d Template Capacity: 10,000 (1:N) (minimum)

e Min Users: 2000 f Log Capacity: 50,000 g TCP/IP: Yes h RS-485: 1 Channel (minimum)

11

i Built-in-Relay: Yes j Wiegand: In/Out Switchable k TTL/IO: 2 Inputs l CPU: 500 MHz (min) m Memory: 16 MB RAM (min) n LCD Display: Color, LCD o LED Indicator: Yes, Multi Color LED p Sound Indication: Multi Tone Buzzer q Ingress Protection: IP65 (Outside) r Tamper: Switch s Warranty: 1 Year (Labor and Parts)

Installation charges, cables, pipe/ducts, door

brackets etc. must be included.

Total =

G KVM Switch for Desktop Machines 2 No

a Brand: Belkin, Adder or equivalent

b Connections: 8 Ports (minimum)

c Port Selection: OSD, Hotkey, Push Button

d KVM Ports: 8 (DVI / VGA / USB) (minimum)

e OS Dependent: No

f Cascade: Yes

g Firmware: Upgradable

h USB Hub: Yes

i Warranty: 1 Year (minimum)

All necessary cables must be included.

Total =

H Revolving Sitting Chairs 20 No

a High back & seat cushion upholstered with Master

molty foam covered with Leather hide or fabric.

b Five Star imported metal base, each prong of

300mm length (approx.)

c Machine & Hydraulic system & Handles imported

(preferably Taiwan or Korean)

d Rest as per the satisfaction of officer In charge &

drawing

e Color: Black or Brown

Total =

I Computer Tables 2 No

a Type: Wooden Frame and Lamination table,

coupled with lockable Drawers, Key Board, CPU

section in the same unit.

b Size: W= 30", L= 60", H= 30

c Drawers: Right Side three drawers with lock all

drawn must have ball channel

d CPU Section: Left side built-in CPU Section with

12

one drawer.

e Key Board Tray: Centrally fixed key board tray

with self-lock.

f Holes: Hole on the top and from CPU section for

cables of CPU, mouse etc.

g All lamination sheet MDF, all edges must be

laminated and PVC lipped

h Color: Dark Brown / Camel Brown

i Warranty: 1 Year

Rest as per the satisfaction of officer In charge &

drawing

Total =

J Vacuum Cleaner 1 No

a Brand: Bosch / Panasonic / Hitachi or equivalent

b Power Consumption: 2300 watts (min)

c Operating Voltage / Frequency: 220v / 50 Hz

d Dust Capacity: 3.5 Ltr (min)

e Type of Filter: HEPA Hygienic

f Other Features: Hard floor nozzle with soft

bristles

g Indication: Dust indicator to avoid overflow

h Warranty: 1 Year service and parts (min)

All the necessary cables and accessories must be

supplied

Total =

K

Installation of Network Points in Server Room,

Technician Room and Monitoring Room Area i.e.

(I/O, Ducts, Patch Panel, Boxes, Face Plates,

Trays etc.)

a I/O, Compatible with Cat 06 Cable, Brand: 3M,

Clipsal or equivalent 80 No

b Wall Mount / PVC Box Fitted Face Plates with

Ethernet I/O for plugging in Patch Cord from

Device, Branded: 3M, Clipsal or equivalent 40 No

c Wall Mounted with Single Shutter Face Plate with

Ethernet Cat 6 I/O's for plugging in patch cords,

Brand: 3M, Clipsal or equivalent 15 No

d Wall Mounted with Dual Shutter Face Plate with

Ethernet Cat 6 I/O's for plugging in patch cords,

Brand: 3M, Clipsal or equivalent 25 No

e RJ-45 Connectors, Compatible with Cat-06.

Branded 3 Boxes

f RJ-11 Connectors, Compatible with telephone cable,

Branded 2 Boxes

g Cat-06 UTP cable roll, 305 meter (minimum), 4

Pairs , Branded: 3M or equivalent 6 Rolls

Ducts:

h 35x40 Brand: Adamjee or equivalent 30 Length

i 40x40 Brand: Adamjee or equivalent 20 Length

13

j 60x60 Brand: Adamjee or equivalent 10 Feet

Any other ducts/trays if required will be provided accordingly.

k Patch Panel:

5 No

l

Cat-06 24 Port Patch Panel, Separate 24 Keystones

Jacks (I/Os) each, Compatible with cat 06 cable

Brand: 3M or equivalent.

All the necessary cable and accessories must be

supplied. Cables must be protect and shielded from

any outside damage.

L Shifting and Installation of Network Equipment

(Racks, Cabinets, Servers etc.) from Basement to

Ground Floor.

1 Job

Total =

M Installation of New Uplinks/Redundant links i.e.

Fiber Optic Uplinks in Old, Additional and

Auditorium building

a Multimode Fiber Optic Cable 4-Core(Feet)

minimum, for Interconnecting Access Switches with

Core Switch, Branded 2500 rft

b Fiber OFDF 24-ports Loaded with Pigtails for server

Room, Branded 2 No

c Fiber OFDF 4-ports Loaded with Pigtails for Each

Floor, Branded 15 No

d Fiber Cable Manager/ Organizer, box containing

OFDF, Branded 15 No

e Multi-Mode Fiber Optic Patch Cord SC-LC,

Branded 40 No

f Splicing of Fiber Optic Cable 110 No

g Fiber Cable Laying (Feet) 2500 rft

h

Fiber Optic Modules/Transceivers, Gigabit,

Compatible with MMF 4-core fiber optic cable

interconnecting Access switches(W2960 + 24 TC-L)

with SG300-10/20SFP switches, Branded 45 No

i Cable Steel Tray (Feet) for ceiling and under

flooring, Branded 400 rft

j SG300-28SFP, Brand: Cisco or equivalent, 1 Year

Parts & Labor Warranty (minimum) 1 No

k All cables must be protected& shielded run in tray

from any damage /Cut.

All the necessary cable and accessories must be

supplied

Total =

Grand Total =

Sr. Administrative Officer (Procurement) Pakistan Nuclear Regulatory Authority

G-8/1, Mauve Area, Islamabad Ph: 051-9263025