Tender Document - Bharat Petroleum...Description State Billing Address Kindly Provide Your Complete...

Domain : bpcleproc.in

Parent department: BPCL

Department : CPO SERVICES Department officer : Nikhil B. Anigol

System ID : 63775 Tender Reference No. : 1000337925

Tender Title : ELECTRICALWORK ATBOKARO LPGBOTTLINGPLANT

Tender Date : 05/09/2019

Tender Description : ELECTRICAL WORK AT BOKARO LPG BOTTLING PLANT

Envelope Bidding Type : In 2 Part bidding Envelope Bidding Option : + +

Bid validity period (in days) : 180 Type of contract : Works

Project duration / delivery orcompletion period (in days)

: - Form of Contract : Buy

Bid submission configuration

Bidding access : Open/Press

Base currency : INR Bidding type : National

Key configuration

Bidding variant : Buy Mode of pre-bid meeting : Offline

Pre Bid Meeting Venue :

Bharat Petroleum

Corporation

Limited,

Central

Procurement

Organisation

(Mktg)

‘A’ Installation,

Sewree Fort Road

Sewree (E),

Tender Document

Tender reference No : 1000337925 System ID : 63775

Tender title : ELECTRICAL WORK AT BOKARO LPG BOTTLING PLANT

page 1 of 162

Mumbai - 400 015

Dates configuration

Document downloading startdate

: 09/09/201913:46:00

Document downloading enddate

: 30/09/201915:00:00

Bid submission start date : 09/09/201913:47:00

Bid submission end date : 30/09/201915:00:00

Pre-bid meeting start date : 16/09/201911:00:00

Pre-bid meeting end date : 16/09/201913:00:00

Bid opening date : 30/09/201915:01:00

Document / EMD / Security fee detail

Tender fees : Not Applicable EMD amount : 100000.00

EMD payable at : BPCL Emd Clause :

The tenderers shall submit

an interest_free Earnest

Money Deposit of Rs.1.00

Lakh (Rupees One Lakh

only) by crossed account

payee Demand Draft drawn

on any nationalised and

scheduled bank in favour of

BHARAT PETROLEUM

CORPORATION LTD

payable at Mumbai or Bank

Guarantee

EMD Payment Method : Demand Draft,Bank Guarantee

Documents

Sr.No. File name File description

Filesize (in

MB)Date and time Status

1 Covering Letter -63775.pdf

Covering Letter 63775 0.714 09/09/201913:34:02

Approved

2 Gen.Instruction tobidders for e tendering-

elec bokaro.pdf

GIT 0.315 07/09/201914:06:15

Approved

3 Instruction to bidder r - Electrical Bokaro 0.707 07/09/2019 Approved



page 2 of 162

Electrical Bokaro.pdf 14:06:15

4 BQC ELECTRICALBOKARO-63775.pdf

BQC 63775 0.480 07/09/201914:06:15

Approved

Bidding forms

Documentfees andEMD

EMD Form

Details Bidder's Response

EMD Amount offering

EMD payment method

Instrument No.

Payment Date

EMD Form

Technicalbid

General Instructions to bidders for e-tendering

Sr.no. Description

Bidder'sConfirmation

1 I /We hereby agree to all the terms and conditions of the attachedAnnexure-I

Annexure I-General Instructions to bidders for e-

tendering

Technicalbid

General Conditions of Contract & HSSE requirements

General Conditions of Contract & HSSE Requirement

Description BiddersConfirmation

Annexure II-General Conditions of Contract & HSSE

requirements



page 3 of 162

I /We hereby agree to all the terms and conditions of the attached Annexurefor General Conditions of Contract

I /We hereby agree to all the terms and conditions of the attached Annexurefor HSSE Requirements

Technicalbid

Standard Payment Terms

Standard Payment Terms

BPCL Standard Payment Terms Bidders Confirmation

I agree to the Payment terms mentioned in the Annexure

Annexure III- Standard Payment Terms

Technicalbid

Instruction to Bidders

Item Description Bidder'sConfirmation

I /We hereby agree to all the terms and conditions of the attached Annexurefor Instruction to Bidder

Annexure-IV INSTRUCTION to BIDDER

Technicalbid

Annexure V - Technical documents

Drawing, Technical Specification, QAP, Scope of JOB etc.

Sr.No. Item Description


1 I /We hereby agree to all the terms and conditions of the attachedAnnexure (including Drawing, Technical Specification, QAP, Scopeof JOB etc.). Any Technical Deviation can be mentioned in TechnicalDeviation Statement only.

Annexure V - Technical documents

Technical



page 4 of 162

bid

“Declarations By The Bidder:· Bidder is not under liquidation, court receivership or similar proceeding.· Bidder is not serving any Holiday Listing orders issued by BPCL or MOPNG debarringthem from carrying on business dealings with BPCL/MOPNG or serving a banning order byanother Oil PSE.· Bidders need to submit the above declarations in the online portal.· Bidders who do not satisfy the above conditions will not be considered for evaluationand ordering.”Bidders to “confirm” or “not confirm” the above declaration in e-portal

Declaration of Holiday Listing & Liquidation

Sr.no. Description


1 I /We declare and confirm that we are currently not serving anyHoliday Listing orders issued by BPCL or MOPNG debarring us fromcarrying on business dealings with BPCL/ MOPNG or serving abanning order by another Oil PSE.

2 We declare and confirm that we are not under liquidation, courtreceivership or similar proceeding.

Annexure VI-Declaration by Bidders for Holiday Listing

& Liquidation

Technicalbid

In case of no Deviations, pls put NIL Deviation

Deviation

AnnexureNumber

FormName

ClauseNumber

Deviation (IfAny)

Justification forDeviation

In case of no Deviations, pls put NIL Deviation

Annexure VII- Deviation Statement

Technicalbid

Billing Address

Annexure VIII-Billing Address



page 5 of 162

Description State BillingAddress

Kindly Provide Your Complete Billing Address; Type of GST namelyIGST/CGST-SGST will be determined based upon the billing addressprovided in the tender & the state in which works are being executed.

Technicalbid

GST Rate Confirmation

GST Rate Confirmation

Description BiddersConfirmation

Kindly Confirm that GST rate is 18% for the tender. In case of deviation,the same to be given in deviation sheet.

Annexure IX- GST Rate Confirmation

Technicalbid

Bidder shall have to essentially accept the clause mentioned here which shall be governing theselection criteria of successful bidders.

Bid Qualification Criteria and Evaluation methodology



1 I /We hereby agree to all the terms and conditions of theattached Annexure

Annexure-X BID QUALIFICATION CRITERIA

Technicalbid

NOTE: KINDLY UPLOAD RESPECTIVE DOCUMENTS EXACTLY IN FRONT OF THEROW.

NOTE: KINDLY UPLOAD APPROPRIATE DOCUMENTS FOR MEETING BIDQUALIFICATION CRITERIA. BIDS WITHOUT REQUIRED DOCUMENTS ARE LIABLE TOGET REJECTED.

Annexure-XI DOCUMENT UPLOAD for BID

QUALIFICATION CRITERIA



page 6 of 162

CRITERIA TENDERREQUIREMENTS

VALUE OFJOB INCRORES

JOBDESCRIPTION

REFERENCENO. OFORDER

TECHNICAL DETAILS OFSIMILAR WORK

DATE OFORDER DATE OF COMPLETION

BID QUALIFICATION CRITERIA (FINANCIAL)

FINANCIAL CRITERIA TURNOVER NETWORTH

BALANCE SHEET AND P&L STATEMENT FOR YEAR 1



Acceptance By Bidders Regarding Holiday Listing/Blacklisting By Oil PSE/PSU

Bidder's Status If "Holiday Listing" Acceptance ByBidder

I/we are currently NOT on holiday list/debarred/blacklisted by any Govt.Organization/statutory bodies/PSU/BPCL & MOPNG and any other Oil PSU.

Technicalbid

Bidder shall have to essentially sign the Integrity Pact(IP) for participating in the tender. Bidder isrequired to download the IP document, sign and also take the witness signatures and upload thesame.

IP



1 Download the Integrity Pact of BPCL. The same is required to besigned by the vendor and also take the witness signatures and uploadthe same.

Annexure XII- Integrity Pact(IP)

Price bid

ELECTRICAL WORKS - BOKARO LPG - Schedule-1



page 7 of 162

Label Value

Short Text ELECTRICAL WORKS - BOKARO LPG -Schedule-1

Quntity 1.00000

Unit of Mesurnment LS

RFQ Item 10

Plant 3206

Label Value

Outline 1

Outline Short text -

Outline Long text -

Parent Outline 0

Column name Bidder response

SAP Item No. 10

Service Code 9020404

Short Description . . . S/F 2P CONSUMER 33KV

Long Description

"DOUBLE POLE STRUCTURE SUPPLY ANDERECTION AT CONSUMER END (BPCL):SUPPLYING AND ERECTION OF STEELTUBULAR OR STEEL RAIL POLE OFLENGTHEXCEEDING 8 METRES BUT NOTEXCEEDING 10 METRES AS REQUIRED BYLOCALELECTRICITY BOARD.INCLUDING ALLACCESSORIES AND HARDWARE LIKEBRACKET/CROSS BRACING/CROSS ARMFRAMES PIN INSULATORS;DROP OUT FUSES;LOCKINGARRANGEMENT;GANG OPERATEDSWITCH ;EARTHING TO THE SYSTEM;LIGHTNINGARRESTOR IF NEEDED ;BOLTS;NUTS ETC AND PAINTING WITH PRIMER ANDFINISHPAINT AS REQUIRED. SCOPE ALSOINCLUDES CIVIL WORKS FOR FOUNDATIONOFPOLES AND FENCING STRUCTURES WITHCHAIN LINK FENCING, MASONRYFOOTINGAROUND THE YARD, SUPPLY ANDERECTION OF GATE, EARTHING OF GATEENTRANCEAND SUPPLY AND SPREADING OFGRAVEL.

TYPICAL DRAWING AND SPECIFICATION



page 8 of 162

ENCLOSED FOR REFERENCE, HOWEVERVENDORTO SUBMIT SITE SPECIFIC DRAWINGFOR APPROVAL FROM ENGINEER INCHARGEPRIOR TO FABRICATION.

SIZE OF THE TWO POLE STRUCTURE ASMENTIONED BELOW :33 KV "

/> /> /> /> /> /> /> />

Plant

UOM (MHG)

Quantity 1.00

Unit Rate in Rs.

Total Cost

GST in % to be Loaded By BPCL

GST in Rs.

Total Landed Amount in Rs.(Figures)

Total Landed Amount in Rs.(Words)

SAC Code


SAP Item No. 20


Short Description . . . S/L CBL 33KV 3CX185

Long Description

"Cables :Supplying, Laying; Testing andCommissioning of 33 KV(UE) GradeCables as pertypical specifications ; PVC/XLPE insulated; PvcSheathed; Armoured Aluminium Conductor Cables ofFollowing Sizes As Per Is:1554(Part-I), IS 7098 Part I& IS 1225-Latest Version and Sealed properlywith PvcCaps In Built-Up Ready Made Trenches; OverheadCable trays;Pullthrough Pipes Or Exposed On Wall.Beam/Rakes; Trusses Tie/BeamorEmbedded In FloorOr buried Directly Underground (Excavation, sandandbricks shall be paid under separate item of BOQ)OrThrough G.I.Pipe.Unit Rates Quoted For InstallationofCables Shall Be SameIrrespective Of Route andMethod Of Laying. The rates Shall IncludeLaying,Pulling Of Cables, Proper Dressing Of Cables onCable Trays, Racks, Vertical Raceways and Supply



page 9 of 162

and Installation Of saddles, Spacersand Nylon ChordFor Tying As Required, Identification Tags AtStrategicPoints/ Every 50 Meter Intervales, AluminiumClamps with fasteners, etc. Cable Identification TagsAt Strategic Points/ Every 50 MeterInterval ForIdentification Of Cable; Etc. Complete.The StraightThroughJoints/ tying with armour In The CablesShould Be avoided.

Size of the cable as mentioned below : 3 CORE X 185SQ.MM"

/> /> /> /> />

Plant

UOM (MHG)

Quantity 60.00

Unit Rate in Rs.

Total Cost


GST in Rs.



SAC Code


SAP Item No. 30


Short Description . . . OUT JT 33KV 3CX185

Long Description

"SUPPLYING & MAKING OUTDOOR CABLEEND TERMINATION FOR FOLLOWING SIZE OF3CORE; 33 K V (UE) GRADE XLPE ALUMINIUMCONDUCTOR ARMOURED CABLE WITH HEATSHRINKABLE JOINTING KIT COMPLETE WITHALL ACCESSORIES;INCLUDING LUGS AND OTHER JOINTINGMATERIALS. . THIS INCLUDESSUPPLY ANDINSTALLATION OF NECESSARY HARDWAREETC. COMPLETE AS PERTYPICALSPECIFICATIONS AND RECOMMENDEDMAKES



page 10 of 162

SIZE OF THE CABLE AS MENTIONED BELOW3 CORE X 185 SQ.MM"

/> /> /> /> /> /> />

Plant

UOM (MHG)

Quantity 4.00

Unit Rate in Rs.

Total Cost


GST in Rs.



SAC Code


SAP Item No. 40


Short Description . . . SITC VCB 33KV 630A

Long Description

"VCB :Design; Manufacture; Testing atManufacturer's Works;Inspection;Packing; Supply;Installation Testing and Commissioning offollowingcapacity of ICOG floor Mounted, Metal Clad, DrawoutTypeSwitchboard.Triplepole Ht Switchgear Panel (Vacuum Circuit Breaker ), etc complete. 33 KV, 350MVA RUPTURING CAP.(25 KA).

Foundation, structural supports etc shall be paid underseparate item ofBOQ.Typical specifications enclosedfor reference, however vendor tosubmit site specificdrawing for approval from Engineer In charge priortofabrication.

Size of the VCB Unit as given below:33 KV 630 A RATED CURRENT CAPACITY."

/> /> /> /> /> /> /> />

Plant



page 11 of 162

UOM (MHG)

Quantity 1.00

Unit Rate in Rs.

Total Cost


GST in Rs.



SAC Code


SAP Item No. 50


Short Description . . . INSTL VCB 33KV 630A

Long Description

"VCB : Transportation from Owner's Yard (within thesite premises) tothe Designated place in Substation,Unloading, Handling, Unpacking, Erection,Alignment, Assembling of Various Shipping sections,Connectionof Interpanel Busbars, Interpanel Wiring,Installation of Relays/Meterssupplied separately,Grouting of Panel fixing Bolts and otherassociatedwork and Testing and Commissioning ofhardware required for Installationand FoundationBolts, Relay Secondary injection and CircuitBreakerTesting and Primary Current Injection etccomplete. 33KV, 350 MVARupturing Cap.(25KA)..Foundation, structural supports etc if any shallbepaid under separate item of BOQ.VCB shall besupplied by BPCL as afree issue material630 A RATED CURRENT CAPACITY."

/> /> /> />

Plant

UOM (MHG)

Quantity 1.00

Unit Rate in Rs.



page 12 of 162

Total Cost


GST in Rs.



SAC Code


SAP Item No. 60


Short Description . . . OLTC TRAFO 33KV 750

Long Description

"TRANSFORMER :Transportation from Owner's yard(within the sitepremises) to the designated place intransformer yard, handling, unpacking, erecting/installing , alignment, assembling of allaccessories, Oilfilling, testing and commissioning ofFollowingDistribution Transformer WITH OLTCAND RTCC including Filtration ofOil, and drying out, if necessary, etc. complete. Installation ShallIncludeNecessary Fixing and interconnecting of accessoriesmounted ontransformer & Marshalling box, explosionvent, , checking of foundationlevel, welding ofstoppers on foundation channels, including alllabourand minor materials, etc. complete.This AlsoIncludes The Testing OfProtective Accessories in AnApproved Manner with all ThePrecommissioning TestAs Per Is-10028 Tobe Carried Out.Foundation, structural supports etc if any shall be paid underseperate item ofBOQ.Transformer and Oil shall besupplied by BPCL as a free issuematerial.Scopeincludes erection, testing and commissioning ofRTCCsupplied with the transformer.

750 KVA, 33 KV/433 V;Delta/Star;3 Phase and 50HzWITH OLTC"

SAME RATE WILL BE APPLICABLE FORINSTALLATION OF 800 KVA, 33 KV/433V;Delta/Star;3 Phase and 50Hz WITH OLTC ALSO/> /> /> /> /> /> />

Plant

UOM (MHG)



page 13 of 162

Quantity 1.00

Unit Rate in Rs.

Total Cost


GST in Rs.



SAC Code


SAP Item No. 70


Short Description . . . TRAFO OIL FILTRATION

Long Description

FILTRATION & DEHYDRATION OF OIL OFTRANSFORMERS IN OPERATINGCONDITIONAT OUR SITE TILL DIELECTRICSTRENGTH OF OIL WITHSTANDS AT LEAST 60KVFOR 1 (ONE) MINUTE, TESTING OFDIELECTRIC STRENGTH OF OIL TO BE DONE&RECORDED AFTER FILTRATION. TOWABLEMACHINE TO BE BROUGHT ANDPOSITIONEDNEAR TRANSFORMER WITHSTANDBY POWER SOURCE AND CHEMICALFILTERS ALONGWITH VACCUUM MOTOR,HOSES AND ALL ALLIED EQUIPMENTS.

/> /> />

Plant

UOM (MHG)

Quantity 250.00

Unit Rate in Rs.

Total Cost




page 14 of 162

GST in Rs.



SAC Code


SAP Item No. 80


Short Description . . . TRAFO OIL TESTING

Long Description

TESTING OF TRANSFORMER OIL AS PER ISWITH 2.5MM GAP ELECTRODESANDRECEPTACLE WITH HT TEST KIT UPTOVOLTAGE REQUIRED FOR TESTING 33KVTRANSFORMER OIL ALONG WITH TESTRESULTS AND CALIBRATION CERTRIFICATEFORTEST EQUIPMENT FROM RECOGNISEDLABS COMPLETE

/> /> />

Plant

UOM (MHG)

Quantity 1.00

Unit Rate in Rs.

Total Cost


GST in Rs.



SAC Code




page 15 of 162

SAP Item No. 90


Short Description . . . ITC DG SET 400 KVA

Long Description

"Installation, Testing And Commissioning Of DG SetWith AMF Panel (offollowing Capacities). InstallationAnd Commissioning Shall Be Carriedout As PerRequirements Of Various Applicable StatutoryAuthorities suchas Electrical Inspector(IE rules),Factory Inspector, Pollution ControlBoardetc.Documents/Drawings Required For Obtaining Theapproval ShallBe made available By Contractor. ScopeIncludes Supply And InstallationO fdifferent Sizes OfMS Pipe (I.E. 4/6 Inch Class B Of Jindal/TataSteel/Approved Equivalent Make) For TheExhaust Of The Engines Withsufficient number OfFlanges; Long Radius; Bends And Sufficient LengthOfThe Pipe etc. Complete Including Installation OfSilencer; FlexiblePipe And also support To TheRadiator And Exhaust Pipe. The ContractorShall alsoinstall The Fuel Tanks, Batteries With BatteryStandIncluding Charging And Its connection And FuelConnections LikeSupplying And Laying MS Class BOf required Dia Fuel Pipe From FuelTank (Approx 30M Distance) Along Withall Required P/L Fittings AndBall Valves Etc.Complete. Also Includes10Mm Thk.Champian/ApprovedEquivalent Make Asbestos RopeOn The Wholeexhaust Pipe, HardwareAndAccessories Etc. Complete.Fuel piping shall bedone using IS 1239 SCH 40piping not excedding 15 meach for return and fuel line respectively.DGExhaustpiping shall be paid under other item of BOQ.Vendorto designthe stack for holding the exhaust piping andget the same approved byBPCL/TPIA prior toinstallation.Structural supports for stack shall bepaidseperately under other item of BOQ.DG Installation shall be done as per OEMrecommendations and foundationif required shall bepaid seperately.400 KVA ; 433 V; 50 HZ"

/> /> /> /> />

Plant

UOM (MHG)

Quantity 1.00

Unit Rate in Rs.

Total Cost


GST in Rs.



page 16 of 162



SAC Code


SAP Item No. 100



Long Description

"Installation, Testing And Commissioning Of DG SetWith AMF Panel (offollowing Capacities). InstallationAnd Commissioning Shall Be Carriedout As PerRequirements Of Various Applicable StatutoryAuthorities suchas Electrical Inspector(IE rules),Factory Inspector, Pollution ControlBoardetc.Documents/Drawings Required For Obtaining Theapproval ShallBe made available By Contractor. ScopeIncludes Supply And InstallationO fdifferent Sizes OfMS Pipe (I.E. 4/6 Inch Class B Of Jindal/TataSteel/Approved Equivalent Make) For TheExhaust Of The Engines Withsufficient number OfFlanges; Long Radius; Bends And Sufficient LengthOfThe Pipe etc. Complete Including Installation OfSilencer; FlexiblePipe And also support To TheRadiator And Exhaust Pipe. The ContractorShall alsoinstall The Fuel Tanks, Batteries With BatteryStandIncluding Charging And Its connection And FuelConnections LikeSupplying And Laying MS Class BOf required Dia Fuel Pipe From FuelTank (Approx 30M Distance) Along Withall Required P/L Fittings AndBall Valves Etc.Complete. Also Includes10Mm Thk.Champian/ApprovedEquivalent Make Asbestos RopeOn The Wholeexhaust Pipe, HardwareAndAccessories Etc. Complete.Fuel piping shall bedone using IS 1239 SCH 40piping not excedding 15 meach for return and fuel line respectively.DGExhaustpiping shall be paid under other item of BOQ.Vendorto designthe stack for holding the exhaust piping andget the same approved byBPCL/TPIA prior toinstallation.Structural supports for stack shall bepaidseperately under other item of BOQ.DG Installation shall be done as per OEMrecommendations and foundationif required shall bepaid seperately.250 KVA ; 433 V; 50 HZ"

/> /> /> /> />

Plant

UOM (MHG)



page 17 of 162

Quantity 1.00

Unit Rate in Rs.

Total Cost


GST in Rs.



SAC Code


SAP Item No. 110



Long Description

"Installation, Testing And Commissioning Of DG SetWith AMF Panel (offollowing Capacities). InstallationAnd Commissioning Shall Be Carriedout As PerRequirements Of Various Applicable StatutoryAuthorities suchas Electrical Inspector(IE rules),Factory Inspector, Pollution ControlBoardetc.Documents/Drawings Required For Obtaining Theapproval ShallBe made available By Contractor. ScopeIncludes Supply And InstallationO fdifferent Sizes OfMS Pipe (I.E. 4/6 Inch Class B Of Jindal/TataSteel/Approved Equivalent Make) For TheExhaust Of The Engines Withsufficient number OfFlanges; Long Radius; Bends And Sufficient LengthOfThe Pipe etc. Complete Including Installation OfSilencer; FlexiblePipe And also support To TheRadiator And Exhaust Pipe. The ContractorShall alsoinstall The Fuel Tanks, Batteries With BatteryStandIncluding Charging And Its connection And FuelConnections LikeSupplying And Laying MS Class BOf required Dia Fuel Pipe From FuelTank (Approx 30M Distance) Along Withall Required P/L Fittings AndBall Valves Etc.Complete. Also Includes10Mm Thk.Champian/ApprovedEquivalent Make Asbestos RopeOn The Wholeexhaust Pipe, HardwareAndAccessories Etc. Complete.Fuel piping shall bedone using IS 1239 SCH 40piping not excedding 15 meach for return and fuel line respectively.DGExhaustpiping shall be paid under other item of BOQ.Vendorto designthe stack for holding the exhaust piping andget the same approved byBPCL/TPIA prior toinstallation.Structural supports for stack shall bepaidseperately under other item of BOQ.



page 18 of 162

DG Installation shall be done as per OEMrecommendations and foundationif required shall bepaid seperately.125 KVA ; 433 V; 50 HZ"

/> /> /> /> />

Plant

UOM (MHG)

Quantity 1.00

Unit Rate in Rs.

Total Cost


GST in Rs.



SAC Code


SAP Item No. 120


Short Description . . . DG EXT 3" PIPE CLAD

Long Description

"Supply, Laying, testing and commisioining of DGexhaust piping fromExhaust flange of DG set to theheight compliant with CPCB norms, PCBnorms.Rateto include supply and welding of 150 # MS flanges andpipesconforming to IS 1239/IS 3589.Aluminiumcladdding with glass wool, required nets etc shall be done conforming to CPCBand PCB norms.Rateto be quoted for RM of theexhaust piping.Standard specifications and GAdrawingIS 1239 Pipeline 150 # 80 NB with aluminiumcladding"

/> /> /> /> />

Plant

UOM (MHG)



page 19 of 162

Quantity 8.00

Unit Rate in Rs.

Total Cost


GST in Rs.



SAC Code


SAP Item No. 130



Long Description

"Supply, Laying, testing and commisioining of DGexhaust piping fromExhaust flange of DG set to theheight compliant with CPCB norms, PCBnorms.Rateto include supply and welding of 150 # MS flanges andpipesconforming to IS 1239/IS 3589.Aluminiumcladdding with glass wool, required nets etc shall be done conforming to CPCBand PCB norms.Rateto be quoted for RM of theexhaust piping.Standard specifications and GAdrawingIS 1239 Pipeline 150 # 100 NB with aluminiumcladding"

/> /> /> /> />

Plant

UOM (MHG)

Quantity 8.00

Unit Rate in Rs.

Total Cost


GST in Rs.



page 20 of 162



SAC Code


SAP Item No. 140



Long Description

"Supply, Laying, testing and commisioining of DGexhaust piping fromExhaust flange of DG set to theheight compliant with CPCB norms, PCBnorms.Rateto include supply and welding of 150 # MS flanges andpipesconforming to IS 1239/IS 3589.Aluminiumcladdding with glass wool, required nets etc shall be done conforming to CPCBand PCB norms.Rateto be quoted for RM of theexhaust piping.Standard specifications and GAdrawingIS 1239/3589 Pipeline 150 # 150 NB with aluminiumcladding"

/> /> /> /> />

Plant

UOM (MHG)

Quantity 8.00

Unit Rate in Rs.

Total Cost


GST in Rs.



SAC Code



page 21 of 162


SAP Item No. 150


Short Description . . . INST LT PANEL

Long Description

"Installation, testing and commissioning of LT switchboards includingleading from yard, unpacking,coupling sections together, minor groutingon to readymade trench with ready made supports includingdrilling thesupports and fastening the board supportfasteners, inter panel wiringif any with ferrules as perdiagram, relay testing and calibration ofall relays andmeters to the extent required for precommissioning asperinsructions of EIC:

Cubicle type single/ double front/ fixed/ drawoutElectrical Panels oftype PCC/ PMCC/ MCC/ MLDB/PDB/ Marshalling Box/ PLC / UPS/ DC DB/APFC/Critical Panel/ SKID/ Wall mounted panels etc"/> /> /> /> />

Plant

UOM (MHG)

Quantity 70.00

Unit Rate in Rs.

Total Cost


GST in Rs.



SAC Code


SAP Item No. 160


Short Description . . . LAY CABLE 10-19MM OD



page 22 of 162

Long Description

"Cables : Laying; Testing and Commissioning of 1.1KV Grade Cables ;PVC/XLPE insulated; PvcSheathed;FR/ FRLS Armoured Aluminium/copperConductor POWER/ CONTROL/ SIGNALCables of Following Sizes As PerIs:1554 (Part-I), IS7098 Part I & IS 1225-Latest Version andSealedproperly with Pvc Caps In Built-Up ReadyMade Trenches, Cable trays, Pullthrough Pipes OrExposed On Wall .Beam/Rakes; Trusses Tie/BeamorEmbedded In Floor Or buried Directly Underground(Excavation, sand andbricks shall be paid underseparate item of BOQ)Or Through G.I.Pipe.Unit RatesQuoted For Installation of Cables Shall BeSameIrrespective Of Route and Method Of Laying.The rates Shall Include Laying, Pulling Of Cables,Proper Dressing OfCables on Cable Trays, Racks,Vertical Raceways and Supply andInstallation Ofsaddles, Spacers and Nylon Chord For Tying AsRequired, Identification Tags At Strategic Points/ Every 50Meter Intervals, Aluminium Clamps with fasteners,etc. Cable Identification aluminiumTags At StrategicPoints/ Every 50 Meter Interval For IdentificationOfCable; Etc. Complete.The Straight Through Joints/tying with armour InThe Cables Should Be avoidedand rate includes all leads and lifts fromand to yard.

size of cable from 10 mm OD to 19 mm OD"

/> /> /> /> /> /> />

Plant

UOM (MHG)

Quantity 43000.00

Unit Rate in Rs.

Total Cost


GST in Rs.



SAC Code


SAP Item No. 170



page 23 of 162



Long Description


size of cable above 20 mm OD to 35 mm OD"

/> /> /> /> /> /> />

Plant

UOM (MHG)

Quantity 37000.00

Unit Rate in Rs.

Total Cost


GST in Rs.



SAC Code



page 24 of 162


SAP Item No. 180



Long Description



/> /> /> /> /> /> />

Plant

UOM (MHG)

Quantity 4800.00

Unit Rate in Rs.

Total Cost


GST in Rs.





page 25 of 162

SAC Code


SAP Item No. 190



Long Description



/> /> /> /> /> /> />

Plant

UOM (MHG)

Quantity 300.00

Unit Rate in Rs.

Total Cost


GST in Rs.




page 26 of 162


SAC Code


SAP Item No. 200


Short Description . . . LAY CAB >6M 10-19MM

Long Description

"Cables : Laying; Testing and Commissioning of 1.1KV Grade Cables atelevations above 6mPVC/XLPE insulated; Pvc Sheathed;FR/ FRLSArmoured Aluminium/ copperConductor POWER/CONTROL/ SIGNAL Cables of Following Sizes AsPerIs:1554 (Part-I), IS 7098 Part I & IS 1225-LatestVersion and Sealedproperly with Pvc Caps InOverhead Cable trays supported on structuresor pullthrough Pipes Or Exposed On Wall .Beam/Rakes OrThrough G.I.Pipe.Unit Rates Quoted For InstallationofCables Shall Be SameIrrespective Of Route andMethod Of Laying. The rates Shall IncludeLaying,Pulling Of Cables, Proper Dressing Of Cables onCable Trays, Racks, Vertical Raceways and Supplyand Installation Of saddles, Spacersand Nylon ChordFor Tying As Required, Identification Tags AtStrategicPoints/ Every 50 Meter Intervales, AluminiumClamps with fasteners, etc. Cable Identificationaluminium tags At Strategic Points/ Every 50MeterInterval For Identification Of Cable; Etc.Complete.The StraightThrough Joints/ tying witharmour In The Cables Should Be avoided andrateincludes all leads and lifts from and to yard.

size of cable from 10 mm OD to 19 mm OD"

/> /> /> /> /> />

Plant

UOM (MHG)

Quantity 500.00

Unit Rate in Rs.

Total Cost


GST in Rs.

Total Landed Amount in Rs.



page 27 of 162

(Figures)


SAC Code


SAP Item No. 210


Short Description . . . LAY CAB >6M 20-35MM

Long Description

"Cables : Laying; Testing and Commissioning of 1.1KV Grade Cables atelevations above 6mPVC/XLPE insulated; Pvc Sheathed;FR/ FRLSArmoured Aluminium/ copperConductor POWER/CONTROL/ SIGNAL Cables of Following Sizes AsPerIs:1554 (Part-I), IS 7098 Part I & IS 1225-LatestVersion and Sealedproperly with Pvc Caps InOverhead Cable trays supported on structuresor pullthrough Pipes Or Exposed On Wall .Beam/Rakes OrThrough G.I.Pipe.Unit Rates Quoted For InstallationofCables Shall Be SameIrrespective Of Route andMethod Of Laying. The rates Shall IncludeLaying,Pulling Of Cables, Proper Dressing Of Cables onCable Trays, Racks, Vertical Raceways and Supplyand Installation Of saddles, Spacersand Nylon ChordFor Tying As Required, Identification Tags AtStrategicPoints/ Every 50 Meter Intervales, AluminiumClamps with fasteners, etc. Cable Identificationaluminium tags At Strategic Points/ Every 50MeterInterval For Identification Of Cable; Etc.Complete.The StraightThrough Joints/ tying witharmour In The Cables Should Be avoided andrateincludes all leads and lifts from and to yard.


/> /> /> /> /> />

Plant

UOM (MHG)

Quantity 500.00

Unit Rate in Rs.

Total Cost


GST in Rs.



page 28 of 162



SAC Code


SAP Item No. 220


Short Description . . . FLP WELLGLASS 45WLED

Long Description

"Supply, installation, testing and commissioning of thefollowing typeof FLP and WP light fittings includinglamps with minor grouting, fasteners on structures andready made mounted poles. structural steeland poleswould be paid in other items of BOQ . Lamps shouldbe suppliedalong with fittings. All fittings shall beapproved by CMRI/ PESO withnumbers embossed onthe equipments and certificates should besuppliedalong with the equipments. The job includesconnection, unarmouredcable and supply of allhardware required for the installation oflightingfixture. Cable termination and connection, supply andfixing ofcable glands with lugs, ferrules as requiredincluding all materials, labors complete.

Ex-d Gas Group IIA, IIB, 45W LED Well GlassFixture"

/> /> /> /> /> />

Plant

UOM (MHG)

Quantity 350.00

Unit Rate in Rs.

Total Cost


GST in Rs.





page 29 of 162

(Words)

SAC Code


SAP Item No. 230


Short Description . . . FLP PB START/STOP

Long Description


Ex-d Gas Group IIA, IIB Start Stop Push Buttonstation"

/> /> /> /> /> />

Plant

UOM (MHG)

Quantity 10.00

Unit Rate in Rs.

Total Cost


GST in Rs.



SAC Code



page 30 of 162


SAP Item No. 240


Short Description . . . FLP PB WT AMMETER

Long Description


Ex-d Gas Group IIA, IIB Start Stop Push Buttonstation with ammeter"

/> /> /> /> /> />

Plant

UOM (MHG)

Quantity 6.00

Unit Rate in Rs.

Total Cost


GST in Rs.



SAC Code


SAP Item No. 250



page 31 of 162


Short Description . . . FLP JUNCTION BOX 4"

Long Description

Supply and installation of Ex-D Gas Group IIA, IIBFLP and WP Junctionbox: 100 dia 4 way Junction boxwith maximum entry three on three sides(top entry notto be given).

/> /> />

Plant

UOM (MHG)

Quantity 20.00

Unit Rate in Rs.

Total Cost


GST in Rs.



SAC Code


SAP Item No. 260


Short Description . . . FLP JUNCTION BOX 6"

Long Description

Supply and installation of Ex-D Gas Group IIA, IIBFLP and WP Junctionbox: 170 dia multiway Junctionbox with maximum 8 entries upto 1" ETwithmaximum entry three on three sides (top entry not tobe given).

/> /> />

Plant

UOM (MHG)



page 32 of 162

Quantity 10.00

Unit Rate in Rs.

Total Cost


GST in Rs.



SAC Code


SAP Item No. 270


Short Description . . . S/I 90W LED POLE LT

Long Description

"Supply, installation, testing and commissioning of thefollowing sizesof High Mast LUMNAIRES ofapproved makes and attachedspecificationsINCLUDING TRIAL FOCUSSINGAND ACHIEVING REQUIRED LUX LEVELS BYCHANGINGANGLES OF LUMINAIRES ANDATTAINING FINAL ACCEPTABLE LEVELSCOMPLETE

Street pole fixture LED - 90W - with pressure die castaluminium housingLED street light luminaries with IP68"

/> /> /> /> />

Plant

UOM (MHG)

Quantity 20.00

Unit Rate in Rs.

Total Cost




page 33 of 162

GST in Rs.



SAC Code


SAP Item No. 280


Short Description . . . S/I FP7.5M SWAG POLE

Long Description

"Supply, installation, testing and commissioning of thefollowing typesof swaged street light poles with thesizes of the poles and thediameters and thickness ofeach of the sections given clearly in theattacheddrawings including provision of holes for cable entry,earthingpoints on poles, base plate, all civil works likeexcavation, PCC, coping of the pole base as perdrawing, supply and fixing of cableprotection pipes asshown in drawing, painting with two coatsofaluminium primer and two coats of aluminium paintand fixing of suppliedfitting with loop in loop outterminals suitable for 4C16 sqmm al cable, lamp fuseHRC and laying of armoured cable from FLPmarshalling box tofitting complete as per attacheddrawing. FLP marshalling box shall be200mm ID andshall be supplied along with glands and nipplesasrequired. Street light fittind would be measured andpaid under seperateitem of BOQ.civil work to be paidseparately

7.5 mt swaged pole as per typical drawing"

/> /> /> /> />

Plant

UOM (MHG)

Quantity 20.00

Unit Rate in Rs.

Total Cost


GST in Rs.



page 34 of 162



SAC Code


SAP Item No. 290


Short Description . . . S/I FLP ET 20MMGLAND

Long Description

"CABLE GLANDS :Supplying and fixing Flame proofand Weather Proof BrassSingle Compression TypeNickle Plated Cable Glands TypeofGlands/Terminations of following sizes. The jobincludes terminationcharges, making the requisiteholes in the Gland Plate, fixing theglands, terminatingthe cables in the Glands, Earthing the cable Armour,neatly clamping the Cables in the Cable Alleys/ WiringTroughs andconnecting to the terminals/ marking withwire number Ferrules/ CableTags (AluminiumMinimum 2 mm thick and 20 mm wide at theterminationpoint), etc. Job also includes consumableitems like Crimping paste, insulation Tapes, etc,stripping of cable Insulation, fixing of cableglands,putting PVC hoods etc complete.

Ex-D Gas Group IIA/B/C FLP glands doublecompression brass nickel ofsize 3/4"" ET includingtermination with suitable size of Copper/Aluminiumlugs and Ferrules."

/> /> /> /> />

Plant

UOM (MHG)

Quantity 130.00

Unit Rate in Rs.

Total Cost


GST in Rs.




page 35 of 162


SAC Code


SAP Item No. 300



Long Description


Ex-D Gas Group IIA/B/C FLP glands doublecompression brass nickel ofsize 1"" ET includingtermination with suitable size of Copper/Aluminiumlugs and Ferrules."

/> /> /> /> />

Plant

UOM (MHG)

Quantity 70.00

Unit Rate in Rs.

Total Cost


GST in Rs.





page 36 of 162

SAC Code


SAP Item No. 310



Long Description


Ex-D Gas Group IIA/B/C FLP glands doublecompression brass nickel ofsize 1 1/4"" ET includingtermination with suitable size of Copper/Aluminiumlugs and Ferrules."

/> /> /> /> />

Plant

UOM (MHG)

Quantity 10.00

Unit Rate in Rs.

Total Cost


GST in Rs.



SAC Code



page 37 of 162


SAP Item No. 320



Long Description


Ex-D Gas Group IIA/B/C FLP glands doublecompression brass nickel ofsize 1 1/2"" ET includingtermination with suitable size of Copper/Aluminiumlugs and Ferrules."

/> /> /> /> />

Plant

UOM (MHG)

Quantity 25.00

Unit Rate in Rs.

Total Cost


GST in Rs.



SAC Code




page 38 of 162

SAP Item No. 330


Short Description . . . S/I FP REDUCER20-25

Long Description

"Supply and fixing of the following sizes of FLPreducers Brass nickelof recommended make withCMRI number and approval complete.

1"" to 3/4"" ET"

/> /> /> /> />

Plant

UOM (MHG)

Quantity 10.00

Unit Rate in Rs.

Total Cost


GST in Rs.



SAC Code


SAP Item No. 340


Short Description . . . S/I FP REDUCER 32-25

Long Description


1 1/4"" to 1"" ET"

/> /> /> /> />



page 39 of 162

Plant

UOM (MHG)

Quantity 10.00

Unit Rate in Rs.

Total Cost


GST in Rs.



SAC Code


SAP Item No. 350



Long Description


1 1/2 "" to 1 1/4"" ET"

/> /> /> /> />

Plant

UOM (MHG)

Quantity 10.00

Unit Rate in Rs.

Total Cost


GST in Rs.



page 40 of 162



SAC Code


SAP Item No. 360



Long Description


2"" to 1 1/2"" ET"

/> /> /> /> />

Plant

UOM (MHG)

Quantity 10.00

Unit Rate in Rs.

Total Cost


GST in Rs.



SAC Code


SAP Item No. 370




page 41 of 162

Short Description . . . S/L DC GLAND 19MM

Long Description

"CABLE GLANDS :Supplying and fixing Heavy Dutyand Weather Proof BrassDouble Compression TypeNickle Plated Cable Glands TypeofGlands/Terminations of following sizes. The jobincludes terminationcharges, making the requisiteholes in the Gland Plate, fixing theglands, terminatingthe cables in the Glands, Earthing the cable Armour,neatly clamping the Cables in the Cable Alleys/ WiringTroughs andconnecting to the terminals/ marking withwire number Ferrules/ CableTags (AluminiumMinimum 2 mm thick and 20 mm wide at theterminationpoint), etc. Job also includes consumableitems like Crimping paste, insulation Tapes, etc,stripping of cable Insulation, fixing of cableglands,putting PVC hoods etc complete.

Double Compression Glands suitable for Cable sizesless than 19 mm ODincluding termination withsuitable size of Copper/ Aluminium lugs andFerrules."

/> /> /> /> />

Plant

UOM (MHG)

Quantity 175.00

Unit Rate in Rs.

Total Cost


GST in Rs.



SAC Code


SAP Item No. 380


Short Description . . . S/L DC GLAND 19-35MM

Long Description



page 42 of 162

"CABLE GLANDS :Supplying and fixing Heavy Dutyand Weather Proof BrassDouble Compression TypeNickle Plated Cable Glands TypeofGlands/Terminations of following sizes. The jobincludes terminationcharges, making the requisiteholes in the Gland Plate, fixing theglands, terminatingthe cables in the Glands, Earthing the cable Armour,neatly clamping the Cables in the Cable Alleys/ WiringTroughs andconnecting to the terminals/ marking withwire number Ferrules/ CableTags (AluminiumMinimum 2 mm thick and 20 mm wide at theterminationpoint), etc. Job also includes consumableitems like Crimping paste, insulation Tapes, etc,stripping of cable Insulation, fixing of cableglands,putting PVC hoods etc complete.

Double Compression Glands suitable for cable sizesgreater than 19mm andless than 35mm OD includingtermination with suitable size of Copper/Aluminiumlugs and Ferrules."

/> /> /> /> />

Plant

UOM (MHG)

Quantity 175.00

Unit Rate in Rs.

Total Cost


GST in Rs.



SAC Code


SAP Item No. 390


Short Description . . . S/L DC GLAND 35-60MM

Long Description

"CABLE GLANDS :Supplying and fixing Heavy Dutyand Weather Proof BrassDouble Compression Type



page 43 of 162

Nickle Plated Cable Glands TypeofGlands/Terminations of following sizes. The jobincludes terminationcharges, making the requisiteholes in the Gland Plate, fixing theglands, terminatingthe cables in the Glands, Earthing the cable Armour,neatly clamping the Cables in the Cable Alleys/ WiringTroughs andconnecting to the terminals/ marking withwire number Ferrules/ CableTags (AluminiumMinimum 2 mm thick and 20 mm wide at theterminationpoint), etc. Job also includes consumableitems like Crimping paste, insulation Tapes, etc,stripping of cable Insulation, fixing of cableglands,putting PVC hoods etc complete.

Double Compression Glands suitable for cable sizesgreater than 35mm andless than 60mm OD includingtermination with suitable size of Copper/Aluminiumlugs and Ferrules."

/> /> /> /> />

Plant

UOM (MHG)

Quantity 55.00

Unit Rate in Rs.

Total Cost


GST in Rs.



SAC Code


SAP Item No. 400


Short Description . . . S/L DC GLAND >60MM

Long Description

"CABLE GLANDS :Supplying and fixing Heavy Dutyand Weather Proof BrassDouble Compression TypeNickle Plated Cable Glands TypeofGlands/Terminations of following sizes. The jobincludes terminationcharges, making the requisite



page 44 of 162

holes in the Gland Plate, fixing theglands, terminatingthe cables in the Glands, Earthing the cable Armour,neatly clamping the Cables in the Cable Alleys/ WiringTroughs andconnecting to the terminals/ marking withwire number Ferrules/ CableTags (AluminiumMinimum 2 mm thick and 20 mm wide at theterminationpoint), etc. Job also includes consumableitems like Crimping paste, insulation Tapes, etc,stripping of cable Insulation, fixing of cableglands,putting PVC hoods etc complete.

Double Compression Glands suitable for Cable sizesgreater than 60 mm OD including termination withsuitable size of Copper/ Aluminium lugs andFerrules."

/> /> /> /> />

Plant

UOM (MHG)

Quantity 35.00

Unit Rate in Rs.

Total Cost


GST in Rs.



SAC Code


SAP Item No. 410


Short Description . . . S/I GI PLAT EARTHING

Long Description

"Supply, installation, testing and comissioning of EarthPits

Earthing: Supplying; & Constructing Plate ElectrodeType Earthing pits as Per IS:3043- (Latest), BPCLearthing drawing; GI Plate ElectrodesShall Be of thesize at least 600 mm x600mm x 6.3 mm thickwithwatering GI pipe, 2 nos of GI strips as per BPCLdrawing conforming toIS 3043(latest). The Earth



page 45 of 162

Connection Shouldbe Joined to the Plate atnot lessthan Two Seprate Points.Plate Electrodes.The job alsoincludes Earth Pit and all necessary materials includingExcavation Of EarthPit.Filling With Homogeneouslayer Of Charcoal And Salt; BackFilling;Providingnecessary Brick Masonry Work; Plastering;CastIroncover; Hinged To C. I. Frame; Fixed WithWire Mesh;Test links forconnecting The Earth GridAnd Earth Electrode etc. Complete. This AlsoIncludesTesting Of Earth resistance after completion and mustbe madewithin acceptable Limits as per IndianElecrticity Rules and submittingthe Test Report ToBpcl Engineer. Minimum Depthof Burial shall be3000mm homogenous Hygroscopic material shouldnot be less than 1Cum.& also300 mm on each side allaround the plate.The scope of work alsoincludesproviding earth pit markers indicatingresistance, test date, next duedate etc. as per std.earthpit boards on GI plate of size @ 300 x300mmx2mm thick with a GI hollow section stand of of 25 mmsquare & length@ 1m; grouted in PCC 1:4:8 at a depthof @300 mm below the ground leveland the top ofplate should be @ 700 mm above the ground level."

/> /> /> /> />

Plant

UOM (MHG)

Quantity 15.00

Unit Rate in Rs.

Total Cost


GST in Rs.



SAC Code


SAP Item No. 420


Short Description . . . S/I GI PIPE EARTHING

Long Description



page 46 of 162

"Supply, installation, testing and comissioning of EarthPits

EARTHING :Supplying, providing and constructingGI Pipe Earth electrodesas Per IS:3043-(Latest), BPCLEarthing drawing; 100 mm Dia;GI PipeMediumClass'B' 3000 mm long complete with EarthPit and all necessarymaterials including excavation ofEarth Pit, filling with homogeneouslayer of Charcoaland salt, Back filling, providing necessaryBrickMasonry work, Plastering, Cast Iron coverhinged to C. I. Frame fixedwith wire mesh;Test linksfor connecting the earth Grid and EarthElectrode etc.complete. This also includes testing of Earthresistanceafter completion and must be made withinacceptable Limits as per IndianElecrticity Rules andsubmitting the Test Report To Engineer- in-charge.Minimum depth of burial shall be 3000 mm,homogenoushygroscopic material should not be lessthan 1 cum. & should cover 300mm around theelectrode up to a height of 2500 mm. The scope ofworkalso includes providing earth pit markersindicating resistance, testdate, next due date etc. as perstd. earthpit boards on GI plate ofsize @ 300 x300mmx 2mm thick with a GI hollow section stand of of25 mmsquare & length @ 1m; grouted in PCC 1:4:8 ata depth of @300 mm belowthe ground level and thetop of plate should be @ 700 mm above thegroundlevel."

/> /> /> /> />

Plant

UOM (MHG)

Quantity 100.00

Unit Rate in Rs.

Total Cost


GST in Rs.



SAC Code


SAP Item No. 430




page 47 of 162

Short Description . . . S/I GI STRIP 50X6MM

Long Description

"Earthing : Supply, laying /installing, connecting andtestingfollowing Hot Dip galvanised wires/ strips offollowing sizes forgrounding the system. Wire/ stripshall run on wall, Column, Roof, Truss, Tie burieddirectly underground at a depth of 600 mmincludingexcavation and backfilling, passing throughinstalled/ laid pipes, neutral of the system to beembedded in floor. Installation shallinclude supply andinstallation of GI clamps; GI spacers ; GI hardware;GIpipe sleeves, binding wires, nuts, bolts, washers,paints, etc.whilepassing through wall or coming out ofFloor chiseling of wall/Floor &making it good is alsoincluded . The scope shall include connections, endtermination, jointing, supply of fixing clamps, bindingwires, bolts, nuts, washers, paints, etc. The jointing ofearth conductorsshall be by bolting/welding/bracing/soldering be as per IS:2709. TheJointing of strips shallbe done by overlapping and with 2 sets of G.I.nut bolt& spring washer spaced at 50mm. The welded portionshall becovered with bitumen compound. Conductorsrequired for gland earthingshall be included in thefollowing items. If separate structuralsupports, pipes,the same shall be covered by separate rates. GIcoatingshall be 85 micron.Double Bolting of GI strips shouldbe donewith SS bolts with required nuts/washersetc.Welding of flats should beneatly covered withbitumen paint50X6 mm"

/> /> /> />

Plant

UOM (MHG)

Quantity 600.00

Unit Rate in Rs.

Total Cost


GST in Rs.



SAC Code




page 48 of 162

SAP Item No. 440



Long Description


/> /> /> />

Plant

UOM (MHG)

Quantity 2000.00

Unit Rate in Rs.

Total Cost


GST in Rs.



SAC Code



page 49 of 162


SAP Item No. 450



Long Description


/> /> /> />

Plant

UOM (MHG)

Quantity 4050.00

Unit Rate in Rs.

Total Cost


GST in Rs.





page 50 of 162

(Words)

SAC Code


SAP Item No. 460



Long Description


/> /> /> />

Plant

UOM (MHG)

Quantity 900.00

Unit Rate in Rs.

Total Cost


GST in Rs.



page 51 of 162



SAC Code


SAP Item No. 470


Short Description . . . S/I 6MM2 CU PVCWIRE

Long Description

"Earthing : Supply, Laying /Installing, connecting andtestingfollowing Copper wires/ strips of followingsizes for grounding thesystem ;Wire/ strip shall run onwall; Column; Roof; Truss; Tie; burieddirectlyunderground at a depth of 600 mm includingexcavation andbackfilling, passing through installed/laid pipes ; Neutral of TheSystem to be embeded infloor. Installation shall include Supply and Installationof Copper saddles/ clamps, Spacers , Hardware,PipeSleeves, binding wires, nuts, bolts, washers,paints, etc.While passingthrough wall or coming out ofFloor chiseling of wall/Floor & making itgood is alsoincluded . The scope shall include connections,endtermination, jointing, supply of fixing clamps,binding wires, bolts, nuts, washers, paints, etc. Thejointing of earth conductors shall bebybolting/welding/bracing/ soldering be as perIS:2709. The weldedportion shall be covered withbitumen compound. Conductors required forglandearthing shall be included in the following items. Ifseparatestructural supports, pipes, the same shall becovered by separaterates.

6 SQ. MM CU PVC insulated flexible FRLSmultistranded wire."

/> /> /> /> />

Plant

UOM (MHG)

Quantity 2000.00

Unit Rate in Rs.

Total Cost


GST in Rs.



page 52 of 162



SAC Code


SAP Item No. 480


Short Description . . . S/I 2.5MM2 CUPVCWIR

Long Description


2.5 SQ. MM CU PVC insulated flexible FRLSmultistranded wire."

/> /> /> /> />

Plant

UOM (MHG)

Quantity 400.00

Unit Rate in Rs.

Total Cost




page 53 of 162

GST in Rs.



SAC Code


SAP Item No. 490


Short Description . . . S/I 1C AL CAB 120MM2

Long Description


Single Core unarmoured Multistranded 120 SQ MMAluminium Cable"

/> /> /> /> />

Plant

UOM (MHG)

Quantity 100.00

Unit Rate in Rs.

Total Cost



page 54 of 162


GST in Rs.



SAC Code


SAP Item No. 500



Long Description



/> /> /> /> />

Plant

UOM (MHG)

Quantity 100.00

Unit Rate in Rs.

Total Cost



page 55 of 162


GST in Rs.



SAC Code


SAP Item No. 510



Long Description



/> /> /> /> />

Plant

UOM (MHG)

Quantity 200.00

Unit Rate in Rs.



page 56 of 162

Total Cost


GST in Rs.



SAC Code


SAP Item No. 520


Short Description . . . S/I CAB JOINT19-35MM

Long Description

"JOINTING :Supplying and making straight throughjoint with cast resincompound including ferrules, lugsand other jointing materials forfollowing size of PVCinsulated and PVC sheathed / XLPE aluminium/copperconductor cable of 1.1 KV grade as required. The jobalsoincludes Supply and fixing Cable Route Markersfor Underground Cable ofRound type with Inscribed""Joints"" etc. Providing MS Angle supportof 50 mmX 50 mm X6 mm, excavation of earth, CementConcrete 1:2:4 forfoundation laid; cured, painting withtwo coats of enamel paint ofapproved colour etc;complete and the Markers should project 600mmabove Gound level. These markers shall beprovided at every joint.Thejoint marker shall havevisible indication regarding the route of thecable,joints, size, etc. complete.cable to be considered as 4core


/> /> /> /> />

Plant

UOM (MHG)

Quantity 4.00

Unit Rate in Rs.

Total Cost




page 57 of 162

GST in Rs.



SAC Code


SAP Item No. 530


Short Description . . . S/I CAB JOINT35-50MM

Long Description

"JOINTING :Supplying and making straight throughjoint with cast resincompound including ferrules, lugsand other jointing materials forfollowing size of PVCinsulated and PVC sheathed / XLPE aluminium/copperconductor cable of 1.1 KV grade as required. The jobalsoincludes Supply and fixing Cable Route Markersfor Underground Cable ofRound type with Inscribed""Joints"" etc. Providing MS Angle supportof 50 mmX 50 mm X6 mm, excavation of earth, CementConcrete 1:2:4 forfoundation laid; cured, painting withtwo coats of enamel paint ofapproved colour etc;complete and the Markers should project 600mmabove Gound level. These markers shall beprovided at every joint.Thejoint marker shall havevisible indication regarding the route of thecable,joints, size, etc. complete.cable to be considered as 4core


/> /> /> /> />

Plant

UOM (MHG)

Quantity 4.00

Unit Rate in Rs.

Total Cost


GST in Rs.



page 58 of 162



SAC Code


SAP Item No. 540


Short Description . . . GI PERF TRAY 2"

Long Description

"PERFORATED TYPE CABLE TRAYS WITHOUTGI COVER :Supplying andInstallation of GIPerforated (Perforation not more than 17.5%)CableTrays (Hot Dipped Galvanised : Less than 2mmthick : @45 to 50 microns;2 mm thick and and lessthan 5 mm thick @ 55-60 Microns; 5mm thickandabove : @ 85 to 90 microns) of following sizeswith accessories and GIHardware (Coupler Plates,Nuts, Bolts, Washers) . The scope alsoinvolvesSupply, Fabrication and installation of all CableTrayaccessories like Bends, Tee Joints, ElbowUp/Down, Reducers, Fishplates, Splices, CrossMember, Connectors, etc. and no separatecharges willbe applicable, even though only straight Lengthsareindicated below. Cable Tray Bends shall befabricated or modified atsite wherever required.Structural supports for the cable tray shall bepaidunder seperate items of BOQ.Design of Structuralsupports should besubmitted by vendor and approvedby BPCL prior to installation.

50 X 25 X 2 mm"

/> /> /> /> />

Plant

UOM (MHG)

Quantity 300.00

Unit Rate in Rs.

Total Cost


GST in Rs.




page 59 of 162

(Figure

Tender Document - Bharat Petroleum...Description State Billing Address Kindly Provide Your Complete...

Documents

Transcript of Tender Document - Bharat Petroleum...Description State Billing Address Kindly Provide Your Complete...