Tender CP TC PQ PU Pondi Audotorium BOQ

PONDICHERRY UNIVERSITY

PUDUCHERRY

TENDER AND CONTRACT DOCUMENT

FOR

Name of Work : Construction of “Convention Center” having Auditorium of 2500 seating capacity and ancillary building for Pondicherry University at Pondicherry Tender No: RITES/CP/TC/PQ/PU/Pondi/Auditorium/CIVIL Package

July 2011 RITES LTD

PART 2 (FINIANCIAL BID)

Tender Document issued to

_______________________(name of Tenderer)

____________________( Address of Tenderer)

Signature of Officer issuing the Document with Designation and Date of issue__________

PART 2

FINANCIAL BID SCHEDULE (BILL) OF QUANTITIES

Part Portion PARTICULARS

Sch

ed

ule

I Civil Works - CPWD DSR 2007(Sub Head 1-12 )

% age Above / Below

Rs.

Sch

ed

ule

II Electrical Works - CPWD SOR 2007 (Sub Head 16)

% age Above / Below

Rs.

A Civil Works - (Sub Head 13) Rs.

Plumbing Works-(Sub Head 14) Rs.

C Fire Fighting Works-(Sub Head 15) Rs.

D Electrical Works-(Sub Head 17) Rs.

E Lift Works-(Sub Head 18) Rs.

Total Rs.

Unconditional Rebate if any % age Rs.

Total Amount After Rebate Rs.

ITE

M R

AT

E

PO

RT

ION

B

Signature of Authorised representative with Company Seal

TOP SUMMARY Name of Work : Construction of “Convention Center” having Auditorium of 2500 seating capacity and ancillary building forPondicherry University at Puducherry

QUOTED RATE / AMOUNT ( IN FIGURE AND IN WORDS)

SCHEDULE ITEMSP

ER

CE

NT

AG

E R

AT

E

PO

TIO

N

NON SCHEDULE ITEMS

In Figures In Words

1 Brick Work Rs. 5621288.50

2 Finishing Rs. 4735677.60

3 Waterproofing Rs. 1716040.95

4 Flooring Rs. 5455837.50

5 Marble Work Rs. 70065.00

6 Earth Work Rs. 1063922.74

7 Concrete Work Rs. 1465044.75

8 Reinforced Cement Concrete Rs. 58434248.00

9 Steel Work Rs. 14769779.25

10 Water Supply Rs. 676396.50

CONVENTION CENTRE AT PONDICHERRY SUMMARY DSR

AmountSubhead No Item

11 Sanitary Installation Rs. 968684.00

12 Drainage Rs. 604546.00

Total DSR (A) Rs. 95581530.79

16 Electric SOR (B) Rs. 1779446.00

Rs. 97360976.79

13 Civil NSR Rs.

14 Plumbing NSR Rs.

15 Firefighting NSR Rs.

17 Electric NSR Rs.

18 Lift Rs.

Total NSR (C) Rs.

Total (A+B+C) Rs.

Summary NSR Total SOR +DSR (A+B)

SHEDULE I

Sr.No. DSR No. Item Description Unit Quantity Rate AmountBRICK WORK

1 6 Brick work

6.1Brick work with F. P. S. bricks of class designation 75 in foundation and plinthin:

6.1.2 Page 99

Cement Mortar 1:6 (1 cement : 6 coarse Sand)Cu. M. 80 2121.75 169740.00

2 6.4 Brick work with F. P. S. bricks of class designation 75 in superstructure aboveplinth level up to floor V level in all shapes and sizes in:

6.4.2 Page 99

Cement Mortar 1:6 (1 Cement: 6 Coarse Sand)Cu. M. 40 2430.25 97210.00

B i k k ith d l fl h li b i k (FALG B i k ) f i t

CONVENTION CENTRE AT PONDICHERRYCIVIL - DSR

Subhead No. 1

3 6.34 Page 102

Brick work with modular fly ash lime bricks (FALG Bricks) conforming toIS:12894-2002, class designation 100 average compressive strength in super-structure above plinth levelupto floor V leve in :

6.34.2 Cement mortar 1:6 (230 mm thick wall) Cu.M 2345 2283.30 5354338.50

Total carried over to Summary ……..

FINISHING

1 13.12 Page 202

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5(1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster1:3 (1 cement : 3 course sand finished rough will sponge.

Sq.M 7100 123.50 876850.00

Subhead No. 2

Sr.No. DSR No. Item Description Unit Quantity Rate Amount

2 13.22 Page 202

Extra for plastering exterior wall of height more than 10 mtr. from ground levelfor every additional height of 3 mtr. or part thereof. Sq.M 2500 16.80 42000.00

3 13.10 Page 202

15 mm cement plaster 1:3 (1 cement : 3 coarse sand) finished with a floatingcoat of neat cement on rough side of single or half brick wall (wall plaster) Sq.M 16350 128.50 2100975.00

4 13.7 Page 201

12 mm thick cement plaster finished with a coat of neat cement of mix 13.7.2 -1:4 (1 Cement : 4 Fine Sand) (Ceiling Plaster) Sq.M 4840 97.90 473836.00

5 13.76 208

Forming groove of uniform size from 12 x 12 mm and upto 25 x 15 mm inplastered surface as per approved pattern using wooden battens, nailed to theunder layer including removal of wooden battens, repairs to the edges of plaster5 Page 208 panel and finishing the groove complete as per specifications and direction ofthe Engineer-in-Charge.

R.M. 1297 13.30 17250.10

6 13.2.1 Page 201

15 mm cement plaster on rought side of single or half brick wall of mix 1:4 (1cement : 4 fine sand) (duct plaster) Sq.M 940 90.35 84929.00

1 13.37 Page 204

White washing with lime to give even shade.

Sr.No. DSR No. Item Description Unit Quantity Rate Amount13.37.1 New work (three or more coats) Sq.M 975 6.75 6581.25

2 13.45 Page 205

Finishing walls with textured exterior paint of required shade.

13.45.1New work (two or more coats applied @ 3.28 lit/ 10 sq.m over and includingbase coat of waterproofing cement paint applied at 2.2 kg/10 sq.m. Sq.M 6145 96.25 591456.25

3 13.52 Page 205

Finishing with epoxy paint (two or more coats) at all locations prepared andapplied as pe rmanufactuers speficcaion including appropriate priming coat,preparation of surface etc., complete.

13.52.1 On steel work Sq.M 7200 75.25 541800.00


WATERPROOFING1 22.1 Water Tank :

Subhead No.3

Page 345

Providing and laying integral cement based treatment for water proofing onhorizontal surface at all depth below ground level for underground stuctures asdirected by Engineer-in-Charge and consisting of I) 1st layer of 22 mm to 25mm thick approved and specified rough stone slab over a 25 mm thick base ofcement mortar 1:3 (1 cement : 3 coarse sand) mixed with waterproofingcompound conforming to IS:2645 in the recommended proportion over thelevelling course (levelling course to be paid separately). Joints sealed andgrouted with cement slurry mixed with waterproofing compound. Ii) 2nd layerof 25 mm thick cement mortar 1:3 ( 1cement : 3 coarse sand) mixed withwaterproofing compound in recommended proportions. iii) Finishing top withstone aggreate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqmthoroughly embedded in the 2nd layer.

22.1.1 Using rough Kota stone Sq.M 177 545.10 96482.70


2 Page 345

Providing and laying integral cement based treatment for waterproofing on othevertical surface by fixing specified stone slab 22 mm to 25 mm thick withcement slurry mixed with wwaterproofing compound conforming to IS:2645 inrecommended proportions with a gap of 20 mm (minimum) between stone slabsand the receiving surfaces and filling the gaps with neat cement slurry mixedwith waterproofing compound and finishing the exterior of stone slab withcement mortar 1:3 (1 cement : 3coarse sand) 20 mm thick with neat cementpunning mixed with water proofing compound in recommended proportioncomplete at all levels and as directed by Engineer-in-Charge.

22.2.1 Using rough Kota stone Sq.M 245 647.85 158723.25

3 22.70 Waterproofing : (Water Tank Top and Terrace)

Page 346Providing and laying integral cement based waterproofing treatment includingpreparation of surface as required for treatment of roofs, balconies, terraces etc.,gcosisting of following operations:

Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixedwith waterproofing compound conforming to IS:2645 and approved by Engineer-in-Charge over the RCC slab inclding adjoining walls upto 300 mm heightinclding cleaning the surface before treatment.

115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixedwith waterproofing compound conforming to IS:2645 and approved by Engineer-in-Charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement: 5coarse sand) admixed with waterproofing compound conforming to IS:2645 andapproved by Engineer-in-Charge to required slope and treating similary theadjoining walls upto 300 mm height including rounding of junctions of wallsand slab.

After two days of proper curing applying a second coat of cement slurry using2.75 kg/sqm of cement admixed with waterproofing compound conforming toIS:2645 and approved by Engineer-in-Charge.

Sr.No. DSR No. Item Description Unit Quantity Rate AmountFinising the surface with 20 mm thick jointless cement mortar of mix 1:4 (1cement : 4 coarse sand) admixed with waterproofing compound conforming toIS:2645 and approved by Engineer-in-Charge including laying glass fibre clothof approved quality in top layer of plaster and finally finishing the surface withtrowel with neat cement slurry and making pattern of 300 x 300 mm square 3mm deep.

The whole terrace so finished shall be flooded with water for a minimum periodof two weeks for curing and for final test. All above operations to be done inorder and as directed and specified by the Engineer-in-Charge.

22.7.1 Page 347

With average thickness of 120 mm and minimum thickness at khurra as 65 mm.Sq.M 2700 541.05 1460835.00

Total carried over to Summary ……..FLOORING

11 3Cement concrrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone

Subhead No.4

1 11.3 Page 172

g ( gaggregate) finishied with a floating coat of neat cement including cement slurrybut excluding the cost of nosing of steps etc., complete.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate Sq.M 440 192.95 84898.00

2 11.4 page 172

52 mm thick cement concrete flooring with concrete hardener topping underlayer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate 20 mm nominal size) and top layer 12 mm thick cementhardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stoneaggregate 6 mm nominal size) by volume hardening compound is mixed @ 2litre per 50 kg of cement or as per manufacturers specifications. This includescost of cement slurry but excluding the cost of nosing of steps etc. complete.

Sq.M 3000 286.55 859650.00

3 11.8 Page 172

Extra for making chequers of approved pattern on cement concrete floor, steps,landing, pavement. Sq.M 3000 13.15 39450.00

Sr.No. DSR No. Item Description Unit Quantity Rate Amount4 11.26 Kota Stone Flooring :-

Page 176

Kota stone slab flooring over 20 mm (average) thick base laid over and jointedwith grey cement slurry mixed with pigment to match the shade of the slabincluding rubbing and polishing complete with base of cement mortar 1:4 (1cement : 4 coarse sand).

11.26.1 25 mm thick Sq.M 535 694.40 371504.00

5 11.27 Page 176

Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointedwith grey cement slurry mixed with pigment to match the shade of the slabs,including rubbing and polishing complete. Sq.M 125 676.75 84593.75

6 11.31 Page 177

Extra for pre-finished nosing in treads of steps of Kota stone/ sand stone slab.R.M 305 26.40 8052.00

7 11.32 Page 177

Extra for Kota stone/sand stone in treads of steps and risers using single lengthupto 1 05 meter Sq M 80 6 45 516 00Page 177 upto 1.05 meter. Sq.M 80 6.45 516.00

8 11.6.1 Page 172

Cement plaster skirting (upto 30 cm height) with cement mortar 1:3 (1 cement :3 sand) finished with a floating coat of neat cement Sq.M 17 168.50 2864.50

Vitrified Floor Tiles :-

9 11.41 Page 178

Providing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption's less than 0.08% andconfirming to IS : 15622 of approved make in all colours and shades, laid on20mm thick cement mortar 1:4 (1cement : 4 coarse sand) including grountingthe joints with white cement and matching pigments etc., complete.

11.41.2 Size of Tile 60x60 cm Sq.M 2885 1031.85 2976887.25

Ceramic Glazed Tiles :-


10 11.36 Page 177

Providing and fixing 1st quality ceremic glazed wall tiles conforming to IS :15622 (thickness to be specified by the manufacturer) of approved make in allcolours, shades except burgundy, bottle green, black of any size as approved byEngineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bedof cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cementslurry @ 3.3kg per sqm including pointing in white cement mixed with pigmentof matching shade complete. Sq.M 1095 556.60 609477.00

11 11.39 Page 178

Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more(thickness to be specified by the manufacturer) of 1st quality conforming to IS :15622 of approved make in colours White, Ivory, Grey, Fume, Red Brown, laidon 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) includinggrouting the joints with white cement and matching pigments etc., complete. Sq.M 550 759.90 417945.00

MARBLE WORKProviding and fixing stone slab table rubbed, edges rounded and polished of size75x50 cm deep and 1.8 cm thick fixed in urinal partitions by cutting a chase of

Subhead No.5

12 8.10appropriate width with chase cutter and embedding the stone in the chase withepoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 gradedstone aggregate 6 mm nominal size) as per direction of Engineer-in-charge andfinished smooth.

8.10.2 Page 121

Granite Stone of approved shade. Sq.M 27 2595.00 70065.00


EARTH WORK

1 2.8 Page 64

Earth work in excavation by mechanical means (hydraulic excavator) /manualmeans in foundation trenches or drains (not exceding 1.5 m in width or 10 sq.mon plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m,including getting out the excacated soil and disposal of surplus excavated soil asdirected within a lead of 50 m.

2.8.1 All kinds of soil Cu.M 8170 103.40 844778.00

Subhead No.6Subhead No.6


2.26 Extra for every additional lift of 1.5m or part thereof in.2.26.1 All kinds of soil Cu.M 4900 18.90 92610.00

3 2.25 Page 67

Filling available excavated earth (excluding rock in trenches, plinth sides offoundations etc. in layers not exceeding 20cm in depth , consolidating eachdeposited layer by ramming and watering, lead up tp 50 m and lift upto 1.5m. Cu.M 2625 45.70 119962.50

4 2.32 Page 68

Cleaning grass and removal of rubbish upto a distance of 50m outside thepheriphery of the area cleared.

100 Sq.M 4845 135.65 6572.24


bhead No.7 CONCRETE WORK1 Cement Concrete (Cast-in-situ)

4 1Providing and laying in position cement concrete of specified grade excluding

4.1 the cost of centering and shuttering - All work up to plinth level:

4.1.5 Page 79

1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded stone aggregate 20mm nominalsize) Cu. M. 495 2791.05 1381569.75

2 4.3Centering and shuttering including strutting, propping, etc., and removal of formwork for:

4.3.1 Page 80

Foundations, footings, bases for columnsSq. M. 700 119.25 83475.00

bhead No.8 Reinforced Cement ConcreteFormwork

5.9Centering and shuttering including strutting, propping, etc., and removal of formfor:

Sr.No. DSR No. Item Description Unit Quantity Rate Amount5.9.1

Page 89Foundations, footings, base of columns, etc., for mass concrete

Sq. M. 2750 119.25 327937.50

5.9.2 Page 89

Walls (any thickness) including attached pilasters, buttresses, plinth and stringcourses etc. Sq. M. 1500 180.40 270600.00

5.9.3 Page 89

Suspended floors, roofs, landing, balconies and access platform.Sq. M. 5290 187.35 991081.50

5.9.5 Page 89

Lintels, beams, plinth beams, girders, bressumers and cantileversSq. M. 11030 162.65 1794029.50

5.9.6 Page 89

Columns, pillars, piers, abutments, posts and strutsSq. M. 6915 238.40 1648536.00

5.9.7 Stairs (excluding landings) except spiral-staircases.Page 89 Sq. M. 720 204.00 146880.00

5.9.8 89

Spiral staircases (including landing). Sq. M. 200 182.70 36540.00

5.9.11 Chimneys and shafts Sq. M. 350 180.40 63140.00

5.9.14 Page 89

Extra for shuttering in circular work (20% of respective centering and shutteringitems)

a Columns below PL Sq. M. 150 23.85 3577.50b Columns above PL Sq. M. 400 47.68 19072.00c Walls Sq. M. 300 36.08 10824.00d Beams Sq. M. 4000 32.53 130120.00e Coping Sq. M. 110 23.85 2623.50


5.9.15 Page 89

Small lintels not exceeding 1.5m clear span, moulding as in cornices, windowsills, string courses, bands, copings, bed plates, anchor blocks and the like.

Sq. M. 380 119.25 45315.00

5.9.16 Page 89

Edges of slabs and breaks in floors and walls.

5.9.16.1 Page 89

Under 20 cm. wideSq. M. 300 61.10 18330.00

5.9.16.2 Page 89

Above 20 cm. wideSq. M. 20 278.25 5565.00

5.9.18 Page 90

Small surfaces such as cantilever ends, brackets and ends of steps, caps andbases to pilasters and columns and the like Sq. M. 20 246.95 4939.00

5.11

Extra for additional height in centering, shuttering where ever required withadequate bracing, propping, etc., including cost of deshuttering and decenteringat all levels over a height of 3 5m for every additional height of 1m or part5. at all levels, over a height of 3.5m, for every additional height of 1m or partthereof (plan area to be measured).

5.11.1Suspended floors, roofs, landings, beams and balconies (Plan area to bemeasured) Sq. M. 14500 70.20 1017900.00

Steel Reinforcement

5.22Reinforcement for R. C. C. work including straightening, cutting, bending,placing in position and binding all complete upto Plinth level.

5.22.6 Thermo-Mechanically treated bars. Kg. 272000 42.70 11614400.00

5.22 AReinforcement for R. C. C. work including straightening, cutting, bending,placing in position and binding all complete. Above Plinth level.

5.22.A.6 Thermo-Mechanically Treated bars. Kg. 420000 42.70 17934000.00

Sr.No. DSR No. Item Description Unit Quantity Rate AmountDesign Mix Concrete

5.33 Page 93

Providing and laying in position machine batched, machine mixed and machinevibrated design mix cement concrete of specified grade for reinforced cementconcrete work including pumping of concrete to site of laying but excluding thecost of centering, shuttering, finishing and reinforcement, including admixturesin recommended proportions as per IS 9103 to accelerate, retard setting ofconcrete, improve workability without impairing strength and durability as perdirection of engineer-in-charge. M-25 grade reinforced cement concrete byusing 380 kg of cement per cu. m. of concrete. All work upto Plinth level.

Cu. M. 2160 3983.75 8604900.00

5.33A

Providing and laying in position machine batched, machine mixed and machinevibrated design mix cement concrete of specified grade for reinforced cementconcrete work including pumping of concrete to site of laying but excluding thecost of centering, shuttering, finishing and reinforcement, including admixturesin recommended proportions as per IS 9103 to accelerate, retard setting ofconcrete improve workability without impairing strength and durability as perconcrete, improve workability without impairing strength and durability as perdirection of engineer-in-charge. M-25 grade reinforced cement concrete byusing 380 kg of cement per cu.m. of concrete. All work above plinth level tofloor V Level.

Cu. M. 3450 3983.75 13743937.50


Steel Work

1 10.1 Page 163

Structural steel work in single section fixed with our without connecting plateincluding cutting, hoisting, fixing in position and applying priming coat ofapproved steel primer, all complete. Kg. 34500 42.15 1454175.00

Subhead No.9Subhead No.9


2 10.2 Page 163

Structural steel work riveted, bolted or welded in built up sections, trusses andframed work, including cutting, hoisting, fixing in position and applying apriming coat of approved steel primer all complete. Kg. 250000 46.35 11587500.00

3 10.6 Page 163

Supplying and fixing rolling shutters of approved make, made of required sizeM.S. laths interlocked together through their entire length and jointed together atthe end by end locks mounted on specially designed pipe shaft with brackets,side guides and arrangements for inside and outside locking with push and pulloperation complete including the cost of providing and fixing necessary 27.5 cmlong wire springs grade No. 2 and M.S. top cover of required thickness forrolling shutters.

3.1 10.6.1 80x1.25mm M.S. laths with 1.25 mm thick top cover. Sq.M 45 1208.45 54380.25

4 10.9 Page 163

Extra for providing grill rolling shutters manufactured out of 8 mmdia. M.S. bar instead of laths as per design approved by Engineer- in-Charge(area of grill to be measured) Sq.M 10 214.90 2149.00q

5 10.19 Page 165

Providing and fixing M. S. round holding down bolts with nuts and washerplates complete. Kg. 1400 52.05 72870.00

6 10.25Steel work welded in built up sections/framed work including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer usingstructural steel as required.

6.1 10.25.1 Page 165

In stringers, treads, landings, etc., of staircases including use of chequered platewherever required, all complete. Kg. 22900 48.95 1120955.00

7 10.26 Page 166

Providing and fixing hand rail of approved size by welding, etc., to steel ladderrailing, balcony railing, and staircase railing including and applying a primingcoat of approved steel primer.

7.1 10.26.3 Page 166

G. I. Pipes

Kg. 7000 68.25 477750.00

SL.NO. DSR NO. DESCRIPTION UNIT QTY RATE AMOUNTWATER SUPPLYProviding and fixing 3 layer PP-R ( Poly PropyleneRandom copolymer ) pipes SDR 7.4 U V stabilized & anti - microbialfusion welded, having thermal stabilityfor hot & cold water supply including all PP R plain

Subhead No.10

1.1 18.4for hot & cold water supply including all PP - R plain& brass threaded polypropylene random fittings i/cfixing the pipe with clamps at 1.00 m spacing. Thisincludes testing of joints complete as per direction ofEngineer-in-charge. Internal work - Exposed on wall.

A 18.4.1 PN - 16 Pipe, 16 mm OD Metre 5071.15 3,557.50

B 18.4.2 PN - 16 Pipe,20 mm OD Metre 80 96.4 7,712.00

C 18.4.3 PN - 16 Pipe,25 mm OD Metre 60 135.3 8,118.00

D 18.4.4 PN - 16 Pipe,32 mm OD Metre 20 205.4 4,108.00

E 18 4 5 PN - 16 Pipe 40 mm OD Metre 20 314 3 6 286 00E 18.4.5 PN - 16 Pipe,40 mm OD Metre 20 314.3 6,286.00

F 18.4.6 PN - 16 Pipe,50 mm OD Metre 10 436.6 4,366.00 Concealed work - PN 16

SL.NO. DSR NO. DESCRIPTION UNIT QTY RATE AMOUNT

1.2 18.5

Providing and fixing 3 layer PP-R (Poly propyleneRandom copolymer) pipes SDR 7.4 U V stablished& anti-mircobial fusion welded, having thermalstability for hot & cold water supply including all PP-R plain & brass threaded polypropylene randomfittrings i/c fixing the pipe with clamps at 1.00 mg g p p pspacing. This includes the cost of cutting chasesand making good the same inclduing testing of jointscomplete as per direction of Engineer in charge.

A 18.5.1 PN - 16 Pipe, 16 mm OD Metre 140 122.65 17,171.00

B 18.5.2 PN - 16 Pipe,20 mm OD Metre 270 153.10 41,337.00

C 18.5.3 PN - 16 Pipe,25 mm OD Metre 60 201.90 12,114.00

D 18 5 4 PN 16 Pi 32 OD M t 40D 18.5.4 PN - 16 Pipe,32 mm OD Metre 40289.30 11,572.00

External work - PN 16

Providing and fixing 3 layer PP-R (Poly propyleneRandom copolymer) pipes U V stablished & anti

1.3 18.6

Random copolymer) pipes U V stablished & anti-mircobial fusion welded, having thermal stability forhot & cold water supply including all PP-R plain &brass threaded polypropylene random fittingsincluding trenching, refilling & testing of jointscomplete as per direction of Engineer in charge.

A 18.6.1 PN - 16 Pipe, 16 mm OD Metre 1068.45 684.50


B 18.6.2 PN - 16 Pipe,20 mm OD Metre 1091.10 911.00

C 18.6.3 PN - 16 Pipe,25 mm OD Metre 60p ,129.45 7,767.00

D 18.6.4 PN - 16 Pipe,32 mm OD Metre 50194.40 9,720.00

E 18.6.5 PN - 16 Pipe,40 mm OD Metre 20294.50 5,890.00

F 18.6.6 PN - 16 Pipe,50 mm OD Metre 375416.80 156,300.00

G 18.6.7 PN - 16 Pipe,63 mm OD Metre 40639.50 25,580.00 ,

H 18.6.8 PN - 16 Pipe,75 mm OD Metre 375903.70 338,887.50

I 18.6.9 PN - 16 Pipe,90 mm OD Metre 101431.50 14,315.00

TOTAL FOR 10 676,396.50


SANITARY INSTALLATION

2.1 17.28 Providing and fixing PVC waste pipe for sink orwash basin including PVC waste fitting complete

Subhead No.11

A 17.28.1.1 32 mm dia Metre 12042.15 5,058.00

B 17.28.1.2 40 mm dia Metre 5047.95 2,397.50

2.3 17.35.1 100 mm dia

A 17.35.1.2 Centrifugally cast (spun) iron soxketed pipe as perIS: 3989. Metre 540

730.40 394,416.00

17.35.2 75 dia pipe

B 17.35.2.2 Centrifugally cast (spun) iron soxketed pipe as perIS: 3989. Metre 390

629.85 245,641.50

P idi d fi i b d f i d d ith2.4 17.38

Providing and fixing bend of required degree withaccess door, insertion rubber washer 3 mm thick,bolts and nuts complete

17.38.1 100 mm


A 17.38.1.2 Sand cast iron S&S as per IS - 3989 Each 12291.00 3,492.00

17 38 2 75 mm17.38.2 75 mm

B 17.38.2.2 Sand cast iron S&S as per IS - 3989 Each 15230.90 3,463.50

2.5 17.39 Providing and fixing plain bend of required degree :

17.39.1 100 mm

A 17.39.1.2 Sand cast iron S&S as per IS - 3989. Each 15236.40 3,546.00

17.39.2 75mm

B 17.39.2.2 Sand cast iron S&S as per IS - 3989. Each 20178.65 3,573.00

Providing and fixing double equal junction of2.6 17.41

g g q jrequired degree with access door, insertion rubberwasher 3 mm thick, bolts and nuts complete.

17.41.1 100 x 100 x 100 x 100 mm



17.41.2 75 x 75 x 75 x 75


2.7 17.42 Providing and fixing double equal plain junction of2.7 17.42 required degree.

17.42.1 100 x 100 x 100 x 100 mm

A 17 42 1 2 Sand cast iron S&S as per IS - 3989 Each 4A 17.42.1.2 Sand cast iron S&S as per IS - 3989. Each 4558.15 2,232.60

17.42.2 75 x 75 x 75 x 75 mm


2.8 17.43Providing and fixing single equal plain junction ofrequired degree with access door, insertion rubberwasher 3 mm thick, bolts and nuts complete

17.43.1 100 x 100 x 100 mm



17.43.2 75 x 75 x 75 mm


2 9 17 44 Providing and fixing single equal plain junction of2.9 17.44 required degree

17.44.1 100 x 100 x 100 mm

A 17 44 1 2 S d t i S&S IS 3989 E h 6A 17.44.1.2 Sand cast iron S&S as per IS - 3989. Each 6442.00 2,652.00

17.44.2 75 x 75 x 75 mm


2.10 17.45Providing and fixing double unequal junction ofrequired degree with access door, insertion rubber2.10 17.45 required degree with access door, insertion rubberwasher 3 mm thick, bolts and nuts complete

17.45.1 100 x 100 x 75 x 75mm



2.11 17.46 Providing and fixing double unequal plain junction ofrequired degreeq g

17.46.1 100 x 100 x 75 x 75mm

A 17.46.1.2 Sand cast iron S&S as per IS - 3989. Each 12757 90 9 094 80757.90 9,094.80

2.12 17.47Providing and fixing single unequal junction ofrequired degree with access door, insertion rubberwasher 3 mm thick, bolts and nuts complete

17.47.1 100 x 100 x 75mm


2.13 17.48 Providing and fixing single unequal plain junction ofrequired degree

17 48 1 100 x 100 x 75 mm17.48.1 100 x 100 x 75 mm


SL.NO. DSR NO. DESCRIPTION UNIT QTY RATE AMOUNTP idi d fi i d bl l l i i b h2.14 17.49 Providing and fixing double equal plain invert branchof required degree

17.49.1 100 x 100 x 100 x 100mm


17.49.2 75 x 75 x 75 x 75mm


2.15 17.50 Providing and fixing single equal plain invert branchof required degreeof required degree

17.50.1 100 x 100 x 100mm

A 17.50.1.2 Sand cast iron S&S as per IS - 3989. Each 8p393.20 3,145.60

17.50.2 75 x 75 x 75mm

B 17 50 2 2 S d t i S&S IS 3989 E h 10B 17.50.2.2 Sand cast iron S&S as per IS - 3989. Each 10299.45 2,994.50

2.16 17.51 Providing and fixing double unequal invert branch ofrequired degree

SL.NO. DSR NO. DESCRIPTION UNIT QTY RATE AMOUNT17.51.1 100 x 100 x 75 x 75


2.17 17.52 Providing and fixing single unequal invert branch ofrequired degree

17.52.1 100 x 100 x 75mm


2.18 17.54 Providing and fixing sand cast iron S&S off sets asper IS : 3989per IS : 3989.

17.54.1 75mm off sets.

A 17.54.1.1 With 75 mm dia pipe. Each 4p p220.45 881.80

17.54.2 150mm off sets.

B 17 54 2 1 610 460 b l d th 178 E h 2B 17.54.2.1 610 x 460 bowl depth 178 mm Each 2277.75 555.50

C 17.54.2.2 With 100 mm dia pipe. Each 4374.15 1,496.60


2.19 17.55 Providing and fixing door piece, insertion rubberwasher 3 mm thick, bolts & nuts complete :

17.55.1 100 mm


1 217.55.2 75 mm


2.20 17.56 Provding and fixing terminal guard

17.56.1 100 mm

A 17.56.1.2 Sand cast iron S&S as per IS - 3989. Each 4194.60 778.40

17.56.2 75 mm


2.21 17.57 Providing and fixing collars


17.57.1 100 mm


17.57.2 75 mm

B 17.57.2.2 Sand cast iron S&S as per IS - 3989. Each 26p146.10 3,798.60

2.22 17.58 Providing lead caulked joints to centrifugally cast(spun) iron pipes and fittings of diameter

A 17.58.1 100 mm Each 240126.50 30,360.00

B 17.58.2 75 mm Each 320107.80 34,496.00

C 17 58 3 50 mm Each 10C 17.58.3 50 mm Each 1086.6 866.00

2.23 17.59 Provding and fixing MS stays and clamps forcentrifugally cast (spun) iron pipes of diameter


A 17.59.1 100 mm Each 24048.25 11,580.00

B 17.59.2 75 mm Each 38041.55 15,789.00

C 17 59 3 50 E h 15C 17.59.3 50 mm Each 1534.25 513.75

2.24 17.60

Providing and fixing trap of of self cleansing designwith screwed down or hinged grating with or withoutvent arm complete, including cost of cutting andp , g gmaking good the walls and floors :

17.60.1 100 mm inlet and 100 mm outlet

Each 60544 3 32 658 00544.3 32,658.00

A 17.60.1.2 Sand cast iron S&S as per IS : 1729.

17.60.2 100 mm inlet and75 mm outlet

Each 30Each 30573.35 17,200.50

B 17.60.2.2 Sand cast iron S&S as per IS : 1729.


2.25 17.61

Cutting chases in brick masonry walls for followingdiameter sand cast iron / centrifugally cast (spun)iron pipes and making good the same with cementconcrete 1:3:6 ( 1 cement : 3 coarse sand : 6 gradedstone aggregate 12.5 mm nominal size ) includingnecessary plaster and pointing in cement mortar 1:4necessary plaster and pointing in cement mortar 1:4( 1 cement : 4 coarse sand).

A 17.61.1 100 mm Metre 10152.45 1,524.50 ,

B 17.61.2 75 mm Metre 20108.85 2,177.00

C 17.61.3 50 mm Metre 6068.40 4,104.00

Painting sand cast iron / centrifugally cast (spun)iron soil, waste vent pipes and fittings with paint of

2.26 17.65p p g p

any colour such as chocolate grey, or buff etc. overa coat of primer ( of approved quality ) for newwork:

A 17 65 1 100 mm diameter pipe Metre 600A 17.65.1 100 mm diameter pipe Metre 60018.8 11,280.00

B 17.65.2 75 mm diameter pipe Metre 80014.25 11,400.00


Providing and fixing MS holder bat clamp ofapproved design to sand cast iron / cast iron (spun)pipes comprising of MS flat brackets made of 50 x 5mm flat of specified shape, projecting 75mm outsidethe wall surface and fixed on wall with 4Nos 6mm

2.27 17.77

the wall surface and fixed on wall with 4Nos. 6mmdia. Expansion hold fasteners incuding drillingnecessary holes in brick wall / CC / RCC surfaceand the cost of bolts etc. The pipes shall be fixed tothe already fixed brackets with the help of 30mm x1.6mm galvanised MS flats of specified shape andof total length 420mm and shall be fixed with MSnuts, bolts, & washers of size 25 x 6mm one bolt oneach side of the pipe.

A 17 77 1 Total bracket length 580 mm of approved shape and Each 60A 17.77.1 gdesign ( for single 100mm dia pipe ). Each 60

121.70 7,302.00

B 17.77.2 Total bracket length 810mm of approved shapeand design ( for two 100 mm dia pipes ). Each 45

148.05 6,662.25

C 17.77.3 Total bracket length 1040mm of approved shapeand design ( for three 100 mm dia pipes ). Each 80

174.35 13,948.00

TOTAL FOR 11 968 684 80TOTAL FOR 11 968,684.80

DRAINAGE

3.1 19.1 STONE WARE PIPING

Subhead No.12


Providing, laying and jointing glazed stonewarepipes grade 'A' with stiff mixture of cement mortar inthe proportion of 1:1 ( 1 cement : 1 fine sand )including testing of joints etc. complete

A 19.1.1 100 dia metre 30105.90 3,177.00

B 19 1 2 150 dia metre 250B 19.1.2 150 dia metre 250151.65 37,912.50

C 19.1.3 200 dia metre 10247.15 2,471.50

3.2 19.2 CONCRETE BEDDING

Providing and laying cement concrete 1:5:10 ( 1cement : 5 coarse sand : 10 graded stone aggregateg gg g40 mm nominal size )alround S.W. pipes includingbed concrete as per standard design:

A 19.2.1 100 dia metre 30331 20 9 936 00331.20 9,936.00

B 19.2.2 150 dia metre 250405.05 101,262.50


C 19.2.3 200 dia metre 10472.15 4,721.50

GULLY TRAPGULLY TRAP

3.3 19.4

Providing and fixing square-mouth S.W. gully trapgrade 'A' complete with C.I. grating brick masonrychamber with water tight C.I. cover with frame of 300300 mm size (inside) the weight of cover to be notless than 4.50 kg and frame to be not less than 2.70gkg as per standard design :

19.4.1 100 x 100 mm size P type

A 19.4.1.2 P type with sewer brick to IS : 4885 Each 181033.35 18,600.30

19.4.2 150 x 100 P type

B 19.4.2.2 P type with sewer brick to IS : 4885 Each 61060.15 6,360.90

19.4.3 180 x 150 P type

C 19.4.3.2 with sewer brick to IS : 4885 Each 61134.95 6,809.70

RCC PIPING

SL.NO. DSR NO. DESCRIPTION UNIT QTY RATE AMOUNTP idi d l i NP2 l (li h

3.4 19.6

Providing and laying non-pressure NP2 class (lightduty) R.C.C. pipes with collars jointed with stiffmixture of cement mortar in the proportion of 1:2 ( 1cement : 2 fine sand ) including testing of joints etc.complete:

A 19.6.1 100 dia R.C.C. pipe metre 20173.95 3,479.00

B 19 6 2 150 dia R C C pipe metre 60B 19.6.2 150 dia R.C.C. pipe metre 60202.85 12,171.00

C 19.6.3 250 dia R.C.C. pipe metre 10258.20 2,582.00

D 19.6.4 300 dia R.C.C. pipe metre 50338.75 16,937.50

E 19.6.5 450 dia R.C.C. pipe metre 10499.55 4,995.50

F 19.6.6 500 dia R.C.C. pipe metre 10584 85 5 848 50584.85 5,848.50

G 19.6.7 600 dia R.C.C. pipe metre 10895.10 8,951.00

SL.NO. DSR NO. DESCRIPTION UNIT QTY RATE AMOUNTMANHOLES & CHAMBERS

Constructing brick masonry manhole in cementmortar 1:4 ( 1 cement : 4 coarse sand) R.C.C. topslab with 1:2:4 mix ( 1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size),foundation concrete 1:4:8 mix ( 1 cement : 4 coarse

3.5 19.7

foundation concrete 1:4:8 mix ( 1 cement : 4 coarsesand :8 graded stone aggregate 40 mm nominalsize ) inside plastering 12 mm thick with cementmortar 1:3 ( 1 cement : 3 coarse sand ) finished withfloating coat of neat cement and making channels incement concrete 1:2:4 ( 1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size)finished with a floating coat of neat cement completeas per standard design :

Inside size 90 x 80 cm and 45 cm deep including

3.5.1 19.7.1C.I. cover with frame (light duty) 455 x 610 mminternal diamensions total weight of cover and frameto be not less than 38 kg (weight of cover 23 kg andweight of frame 15 kg)

A 19.7.1.1 With F.P.S. bricks with class designation 75 Each 55383.70 26,918.50

B 19.7.1.2 With Sewer bricks conforming to IS : 4885 Each 14g5640.50 78,967.00


3.5.2 19.7.2

Inside size 120 x 90 cm and 90 cm deep includingC.I. cover with frame ( medium duty ) 500 mminternal diameter, total weight of cover and frame tobe not less than 116 kg. (weight of cover 58 kg andweight of frame 58 kg.)


B 19.7.2.2 With Sewer bricks conforming to IS : 4885 Each 212584.65 25,169.30

3 5 3 19 7 3

Inside size 120 x 90 cm and 90 cm deep includingC.I. cover with frame ( heavy duty ) 560 mm internaldiameter total weight of cover and frame to be not3.5.3 19.7.3 diameter, total weight of cover and frame to be notless than 208 kg ( weight of cover 108 kg andweight of frame 100kg )

A 19.7.3.1 With F.P.S. bricks with class designation 75 Each 215673 85 31 347 7015673.85 31,347.70


B 19.7.3.2 With Sewer bricks conforming to IS : 4885 Each 216278.10 32,556.20

3.6 19.8 Extra for depth of manholes

19.8.1 Size 90 x 80 cm

A 19.8.1.1 With F.P.S. bricks class designation 75. metre 32654.00 7,962.00

B 19.8.1.2 With Sewer bricks conforming to IS:4885. metre 33401.80 10,205.40

19 8 2 Size 120 x 90 cm19.8.2 Size 120 x 90 cm


C 19.8.2.1 With F.P.S. bricks class designation 75. metre 33179.95 9,539.85

D 19.8.2.2 With Sewer bricks conforming to IS:4885. metre 3g4071.30 12,213.90

Constructing brick masonry circular type manhole0.91 m internal dia at bottom and 0.56 m dia at incement mortar 1:4 ( 1 cement : 4 coarse sand )

3.6 19.9

cement mortar 1:4 ( 1 cement : 4 coarse sand ),inside cement plaster 12 mm thick with cementmortar 1:3 ( 1 cement : 3 coarse sand ) finished witha floating coat of neat cement, foundation concrete1:3:6 mix ( 1 cement : 3 coarse sand : 6 gradedstone aggregate 40 mm nominal size), and makingnecessary channel in cement concrete 1:2:4 ( 1necessary channel in cement concrete 1:2:4 ( 1cement : 2 coarse sand : 4 graded stone aggregate20 mm nominal size ) finished with a floating coat ofneat cement all complete as per standard design :

0.91 m deep with S.F.R.C. cover and frame ( heavy)

3.6.1 19.9.1

duty, HD-20 grade designation ) 560 mm internaldiameter conforming to IS :12592, total weight ofcover and frame to be not less than 182 kg., fixed incement concrete 1:2:4 ( 1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size )including centering shuttering all complete.g g g p(Excavation, foot rests and 12 mm thick cementplaster at the external surface shall be paidseparately).



B 19.9.1.2 With Sewer bricks conforming to IS : 4885 Each 2g5347.90 10,695.80

3.7 19.10 Extra depth for circuler type manhole 0.91 m internaldia (at bottom) with beyond 0.91m to 1.67m.

A 19.10.1 With F.P.S. bricks with class designation 75 Metre 22289.75 4,579.50

B 19.10.2 With Sewer bricks conforming to IS : 4885 Metre 22915.90 5,831.80

Making connection of drain or sewer line withexisting manhole including breaking into and makinggood the walls, floors with cement concrete 1:2:4

3.8 19.21

good the walls, floors with cement concrete 1:2:4mix ( 1 cement : 2 coarse sand : 4 graded stoneaggregate 20 mm nominal size ) cement plasteredon both sides with cement mortar 1:3 ( 1 cement : 3coarse sand ) finished with a floating coat of neatcement and making necessary channels for thedrain etc complete :drain etc. complete :

A 19.21.1 For pipes 100 to 230mm diameter Each 1164.30 164.30


3.9 19.27

Constructing brick masonry road gully chamber 50 x45 x 60 cm with bricks of class designation 75 incement mortar 1:4 ( 1 cement : 4 fine sand )including 500 x 450 mm precast R.C.C. horizontalgrating with frame complete as per standard design :

A With F.P.S. Bricks Each 202248.35 44,967.00

Constructing brick masonry road gully chamber 45 x

3.1 19.28

Constructing brick masonry road gully chamber 45 x45 x 77.5 cm with bricks of class designation 75 incement mortar 1:4 ( 1 cement : 4 fine sand ) withprecast R.C.C. vertical grating complete as perstandard design :

A With F.P.S. Bricks Each 102358.00 23,580.00

TOTAL FOR 12604,546.05

Net Total95,581,530.79

SHEDULE II

SL.NO. SOR NO. DESCRIPTION UNIT QTY RATE AMOUNT

1.0 PRE-WIRED MCB DISTRIBUTION BOARDS

1.1 2.41 S/F prewired SP MCB DBSupplying and fixing following way, single pole andneutral, prewired, sheet steel, MCB distributionboard, 240 volts, on surface/recess, complete withloose wire box, terminal block, duly prewiredwith suitable size FR PVC insulated copperconductor upto terminal blocks, tinned copperbusbar, neutral link, earth bar, din bar, detachablegland plate, internconnections, phosphatized andpowder painted including earthing etc. as required(But without MCB/RCCB/Isolator)

1.1.1 2.41.4 2 + 4 way, Double door (gate house) Each 1 2139 2,139.00 1.1.2 2.41.5 2 + 8 way Double door (projector) Each 1 3024 3,024.00 1.1.3 2.41.6 2 + 12 way Double door (AV eqpts.) Each 1 3959 3,959.00

1.2 2.42 S/F prewired TP MCB DBSupplying and fixing following way, three pole andneutral, prewired, sheet steel, MCB distributionboard, 415 volts, on surface/recess, complete withloose wire box, terminal blocks, duly pre wiredwith suitable size FR PVC insulated copper conductor upto terminal blocks, tinned copperbusbar, neutral link, earth bar, din bar, detachablegland plate, internconnections, phosphatized and powder painted including earthing etc. as required(But without MCB/RCCB/Isolator)

1.2.1 2.42.5 4 way (4 + 12), Double door Each 1 5395 5,395.00 1.2.2 2.42.6 6 way (4 + 18), Double door Each 1 6941 6,941.00 1.2.3 2.42.7 8 way (4 + 24), Double door Each 6 8337 50,022.00 1.2.4 2.42.8 12 way (4 + 36), Double door Each 10 9833 98,330.00

PONDICHERRY UNIVERSITYCONVENTION CENTRE (Subhead No-16)

1.3 2.43 S/F vertical type prewired SP MCB DBSupplying, installation, testing and commissioningof surface/recess mounting, vertical type, 415 volts, prewired, TPN MCB distribution board ofsheet steel, dust protected, duly phosphatizedand powder painted, inclusive of 200 amps tinnedcopper busbar, common, neutral link, earth bar,din bar, for mounting MCB's, detachable gland/knock out plate, and with built in loose wire box, and superior make terminal connectors for all incomingand outgoing circuits, duly prewired with adequatesize of FR PVC insulated copper conductor upto the terminal connector/neutral link and ready forinstallation of following ways (but without MCB'sand incomer) as required(Note : Prewired vertical type MCB TPDB is normally used where 3 phase outlets as required)

1.3.1 2.43.8 12 way Double door (Kitchen) Each 1 12451 12,451.00

MCB's

1.4 2.51 S/F 'B' series, SP MCBSupplying and fixing 5 amps to 32 amps rating, 240volts, 'B' series, miniature circuit breaker suitablefor lighting and other loads of following poles in theexisting MCB DB complete with connections,testing and commissioning etc. as requried

1.4.1 2.51.1 Single pole Each 100 86 8,600.00 1.4.2 2.51.3 Triple pole Each 20 273 5,460.00 1.4.3 2.51.2 Single pole and neutral Each 505 171 86,355.00 1.4.4 2.51.4 Triple pole and neutral Each 26 352 9,152.00

1.5 2.52 S/F 'C' series, SP MCBSupplying and fixing 5 amps to 32 amps rating, 240volts, 'C' series, miniature circuit breaker suitablefor inductive load of following poles in theexisting MCB DB complete with connections,testing and commissioning etc. as requried

1.5.1 2.52.1 Single pole Each 25 94 2,350.00 1.5.2 2.52.3 Triple pole Each 5 386 1,930.00

2.52.2 Single pole and neutral Each 250 243 60,750.00 2.52.4 Triple pole and neutral Each 3 502 1,506.00

1.6 2.53 S/F 'B' series, SP MCB blanking plate Each 60 2 120.00 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required

1.7 2.54 S/F DP MCB isolatorSupplying and fixing following rating, double pole,240 volts, isolator in the existing MCB DB completewith connections, testing and commissioning etc.as required

1.7.1 2.54.1 40 amps Each 2 166 332.00 1.7.2 2.54.2 63 amps Each 1 196 196.00

1.8 2.55 S/F TP MCB isolatorSupplying and fixing following rating, four pole, 415volts, isolator in the existing MCB DB completewith connections, testing and commissioning etc.as required

1.8.1 2.55.1 40 amps Each 1 345 345.00 1.8.2 2.55.2 63 amps Each 1 362 362.00 1.8.3 2.55.3 100 amps Each 1 460 460.00

Supply Installation Testing & commissioning of following ELCB in existing DB's /Panel/Individually

1.9 1724 32/40 amps. Rating, 2 pole ELCB + MCB 100 mA/ 300mA Each 10 1041 10,410.00 -

1.10 1725 63 amps. Rating, 2 pole ELCB + MCB 100 mA/ 300mA Each 10 1155 11,550.00

1.11 1727 32/40 amps. Rating, 4 pole ELCB + MCB 100 mA/ 300mA Each 10 1130 11,300.00

1.12 1727 63 amps. Rating, 4 pole ELCB + MCB 100 mA/ 300mA Each 10 1357 13,570.00

1.13 2.56 S/F SPN RCCBSupplying and fixing following rating, double pole,(single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivitycurrent upto 300 milliamperes in the existing MCBDB complete with connections, testing andcommissioning etc. as requried

1.13.1 2.56.2 40 amps Each 1 1007 1,007.00 1.13.2 2.56.3 63 amps Each 1 1343 1,343.00

1.14 2.57 S/F TPN RCCBSupplying and fixing following rating, four pole,(three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivitycurrent upto 300 milliamperes in the existing MCBDB complete with connections, testing andcommissioning etc. as requried

1.14.1 2.57.2 40 amps Each 7 1208 8,456.00 1.14.2 2.57.3 63 amps Each 10 1426 14,260.00

supplying and fixing of GI box with modular plate and cover in fronton surface or in recess, including providing and fixing of 3pin 5/6amps modular socket outlet and 5/6amps modular switch or/ and 6 Pin 15/16 modular socket outlet and 15/16 Amp modularswitch connection etc as required

1.24 Supplying and fixing modular switch / socket on existing modlularplate and switch box including connections but excluding modularplate etc as required

1.24.1 5 / 6 Amps switch Each 310 46.00 14,260.00 1.24.4 3 Pin 5/6 Amps socket outlet Each 150 64.00 9,600.00 1.24.3 15 / 16 Amps switch Each 180 67.00 12,060.00 1.24.5 6 Pin 15/16 Amps socket outlet Each 180 101.00 18,180.00

1.27 Supplying and fixing following size / modules, GI Box along withmolular base & cover plate for modular switches in recess etc asrequired

1.27.1 1 or 2 Module ( 125mm x 75mm) Each 310 113.00 35,030.00 1.27.2 4 Module ( 125mm x 75mm) Each 200 113.00 22,600.00

21.21 2.62 supply and fixing of 20amps 240volts,SPN industrial type, socketoutlet with 2pole and earth metal enclosed plug top along with20amps 'C' series,SP MCB in sheet steel enclosure on surface or inrecessed on the wall with chained metal cover for socket outlet andcomplete with connection, testing and commissioning etc asrequired.

Each 10 520.00

5,200.00 21.21 2.63 supply and fixing of 20amps 240volts,SPN industrial type, socket

outlet with 2pole and earth metal enclosed plug top along with20amps 'C' series,SP MCB in sheet steel enclosure on surface or inrecessed on the wall with chained metal cover for socket outlet andcomplete with connection, testing and commissioning etc asrequired.

Each 6 1073.00

6,438.00 21.25 1.25 supplying and fixing stepped type electronic fan regulator on the

existing modular plate switch box including connections etc asrequired.

Each 5 247.00

1,235.00 1.17 Supplying and drawing following sizes of FR PVC insulated cu

conductor, single core cable in the esisting surface/ recessed steel/PVC conduit as required

1.17.3 3X1.5sq mm Metre 300 32.009,600.00

1.17.6 6X1.5sq mm Metre 250 52.0013,000.00

1.17.12 3X2.5sq mm Metre 250 43.0010,750.00

1.17.15 6X2.5sq mm Metre 150 73.0010,950.00

1.17.21 3X4 sq mm Metre 100 58.005,800.00

1.17.30 3X6 sq mm Metre 100 83.008,300.00

1.21 Supply and fixing of following size of MS conduit along withaccessories in surface/ recessed including cutting the wall & makinggood the same in case of recessed conduit as required.

1.20.1 i) 20 mm pipe Metre 200 77.0015,400.00

1.20.2 ii) 25 mm pipe Metre 100 86.008,600.00

1.20.3 ii) 32 mm pipe Metre 50 105.005,250.00

1.15 2.61 S/F 10A SPN MCB industrial socket outlet Each 6 509 3,054.00 Supplying and fixing 10 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earthmetal enclosed plug top along with 10 amps 'C'series, SP MCB, in sheet steel enclosure, onsurface or in recess with chained metal cover forthe socket outlet and complete with connections,testing and commissioning etc. as required

1.16 2.62 S/F 20A SPN MCB industrial socket outlet Each 8 520 4,160.00 Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earthmetal enclosed plug top along with 20 amps 'C'series, SP MCB, in sheet steel enclosure, onsurface or in recess with chained metal cover forthe socket outlet and complete with connections,testing and commissioning etc. as required

1.17 2.63 S/F 20A TPN MCB industrial socket outlet Each 1 1073 1,073.00 Supplying and fixing 20 amps, 240 volts, TPN industrial type, socket outlet, with 4 pole and earthmetal enclosed plug top along with 20 amps 'C'series, TP MCB, in sheet steel enclosure, onsurface or in recess with chained metal cover forthe socket outlet and complete with connections,testing and commissioning etc. as required

1.18 2.64 S/F 30A TPN MCB industrial socket outlet Each 4 1294 5,176.00 Supplying and fixing 30 amps, 240 volts, TPN industrial type, socket outlet, with 4 pole and earthmetal enclosed plug top along with 30 amps 'C'series, TP MCB, in sheet steel enclosure, onsurface or in recess with chained metal cover forthe socket outlet and complete with connections,testing and commissioning etc. as required

1.19 2.71 P/F MV danger notice plate Each 8 68 544.00 Providing and fixing MV danger notice plate of 200mm x 150 mm made of mild steel at least 2 mmthick, and vitreous enamelled white on both sides,and with inscription in single red colour on frontside as required

1.20 2.72 P/F HV danger notice plate Each 4 75 300.00 Providing and fixing HT danger notice plate of 250mm x 200 mm made of mild steel at least 2 mmthick, and vitreous enamelled white on both sides,and with inscription in single red colour on frontside as required

2.0 2.8 Laying 1 no. XLPE insulated power cable of grade Metre 30 130 3,900.00 33CBG exceeding 11 KV but not exceeding 33 KV of sizeR400 exceeding 120 sq.mm but not exceeding 400 sq.mm

direct in ground including excavation, sand cushioning and protective covering and refilling the trench etc. asrequired

3.0 2.11 Laying of 1 no. XLPE power cable of grade Metre 10 37 370.00 33CBPI exceeding 11 KV but not exceeding 33 KV of size notP400 exceeding 400 sq.mm in the existing RCC/HUME/

Stoneware/Metal pipe as required

3.0 2.12 Laying of 1 no. XLPE power cable of grade Metre 10 31 310.00 33CBBO exceeding 11 KV but not exceeding 33 KV of size notD400 exceeding 400 sq.mm in the existing masonary open

duct /Pipe as required

4.0 4.1 Supplying and making end termination with brass MVET compression gland and Al. lugs for following size of

PVC insulated and PVC Sheathed/ XLPE Al. conductor cable of 1.1 KVgrade as required

4.1 4.1.30 a) 3.5 x 300 sq.mm Set 26 508 13,208.00 4.2 4.1.29 b) 3.5 x 240 sq.mm Set 18 381 6,858.00 4.3 4.1.27 c) 3.5 x 185 sq.mm Set 2 319 638.00 4.4 4.1.26 d) 3.5 x 150 sq.mm Set 3 278 834.00 4.5 4.1.25 e) 3.5 x 120 sq.mm Set 2 199 398.00 4.6 4.1.23 f) 3.5 x 70 sq.mm Set 1 168 168.00 4.7 4.1.21 g) 3.5 x 35 sq.mm Set 5 137 685.00 4.8 4.1.34 h) 4 x 25 sq.mm Set 1 137 137.00 4.9 4.1.33 i) 4 x 16 sq.mm Set 14 196 2,744.00

5.0 4.3 Supplying and making straight through joint with cast

MVSJ resin compound including ferrule and other jointing material for following sizes of PVC insulated and PVC sheathed/XLPE conductor cables of 1.1 KV grade as required

4.3.27 a) 3.5 x 300 sq.mm Each 15 1960 29,400.00

6.0 3.6 Earthing with copper Earth plate 600 mm x 600 mm x Set 19 3263 61,997.00 EARC 3 mm thick including accessories and providing masonaryUPL enclosure with cover plate having locking arrangement

and watering pipe etc. (but without charcoal or coke andsalt) complete as required

7.0 3.1+3.3 EARGIPIP+EARCHARPIP

Earthing with GI earth pipe 4.5 mtrs long 40mm dia including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc with required quantity of salt and charcoal filling as per IS 3043/1986 Each 5 1,971.00 9,855.00

8.0 3.8 Extra for using coke and salt for GI or copper Set 10 1484 14,840.00 EARC plate earthing electrode as requiredOKPL

9.0 3.7 Extra for using charcoal and salt for GI or copper Set 10 603 6,030.00 EARC plate earthing electrode as requiredHRAPL

10.0 3.5 Earthing with GI earth plate 600 mm x 600mm x 6mm Set 25 1585 39,625.00

EARG thick including accessories and providing masonary enclosureIPL with cover plate having locking arrangement and

watering pipe etc. (but without charcoal or coke and salt)complete as required

11.0 3.13 Providing & fixing 25mm x 5mm Copper strip** in 40mm Meter 50 494 24,700.00 EARCU size GI pipe from earth electrode STPIP as required

12.0 3.17 Providing & fixing 25mm x 5mm copper strip on surface Meter 600 570 342,000.00 EARC or in recessed for connection etc as requiredUSTSU

13.0 3.23 Providing and fixing earth bus of 50mm x 5mm copper Metre 375 665 249,375.00 EARB strip on surface for connection etc. as requiredUS

14.0 3.14 Providing and fixing 25mm x 5mm GI strip in 40mm dia Metre 450 218 98,100.00 EARGI GI pipe from earth electrode as requiredSTPIP

15.0 3.18 Providing and fixing 25mm x 5mm GI strip on surface or Metre 225 66 14,850.00 EARGI in recess for connection etc. as requiredSTSU

16.0

4.4 LCRSS

Reverting, sweating and soldering of copper/ GI tape (with another copper/GI tape, base of finial or any other mettallic object) as required Each 34 56 1,904.00

17.0

3.9 EAR8GCUWR

Supply and laying of 8 SWG copper wire at 0.50mtrs below ground level for conductor earth electrode including soldering etc as required

RM1000 41

41,000.00

18.0 1.7Laying of one number PVC insulated & PVC sheathed/XLPE power Metre 25 15 375.00

MVCBP cable of 1.1 KV grade of size not exceeding 25 sq.mmIP25 in the existing RCC/HUME/STONEWARE/METAL

pipe as required

19.0 1.8Laying of one number PVC insulated & PVC sheathed/ XLPE power Metre 80 21 1,680.00

. MVCBP cable of 1.1 KV grade of size exceeding 25 sq.mm,IP400 but not exceeding 400 sq.mm in the existing

RCC/HUME/STONEWARE/METAL pipe as required

20.0 1.9Laying of one number PVC insulated & PVC sheathed/XLPE power Metre 30 12 360.00

MVCBO cable of 1.1 KV grade of size not exceeding 25 sq.mmD25 in the existing masonary open duct, as required

21.0 1.10Laying of one number PVC insulated & PVC sheathed/XLPE power Metre 480 17 8,160.00

MVCBO cable of 1.1 KV grade of size exceeding 25 sq.mm D400 but not exceeding 400 sq.mm in the existing masonary

open duct, as required

22.0 1.11Laying and fixing of one number PVC insulated and PVC sheathed Metre 160 31 4,960.00

MVCBS XLPE aluminium conductor cable of 1.1 KV gradeSUR25 of size not exceeding 25 sq.mm on surface as required

23.0 1.12 Laying and fixing of one number PVC insulated and PVC Metre 1000 59 59,000.00 MVCBS XLPE aluminium conductor cable of 1.1 KVUR400 grade, of size exceeding 25 sq.mm but not exceeding

120sq.mm etc. on surface as required

23.0 1.13Laying and fixing of one number PVC insulated and PVC sheathed Metre 1350 61 82,350.00

MVCBS XLPE aluminium conductor cable of 1.1 KVUR400 grade, of size exceeding 120 sq.mm but not exceeding

400 sq.mm etc. on surface as required

1,779,446.00 TOTAL OF DSR ITEMS

SECTION A

In Figures In Words

BRICK MASONRY WORK

1

Providing and laying patli of size 115 mm x 100 mm thick (1:2:4)mix 1 cement : 2 coarse sand: 4 stone aggregate 12.5 mm nominalsize down graded cast-in-situ reinforced cement-concrete horizontalband in half brick partition walls at any floor including providingand fixing tested quality mild steel reinforcement 2 Nos. 6 mm dia.bars at bottom and 2 Nos. 6 mm dia. bars at top with 6 mm dia.rectangular stirups spaced at 300 mm centres including lappings inreinforcement as required, including side shuttering, form work,centring, notching in adjacent brick work or RCC members, atheight intervals of 1.50 m in brick walls or as directed by Engineer-in-Charge, including scaffolding, watering, curing etc., complete.

R.M 1210.00

2

Brick work with modular fly ash lime bricks (FALG Bricks)confirming to IS 128 94-2002 class designation 100 averagecompressived strength in super structure above plinth level (115 mmthick brick work in cement mortar 1:4 mix)

Sq.M 4244.00

3Providing and applying "Renovo" synthetic plaster. a product of"Damani Dye-chem, Mumbai" Sq.M 200.00

Toilets

CONVENTION CENTRE AT PONDICHERRYCIVIL WORK NSR (Subhead 13)

Item Description QuantityUnit AmountRateSubhead 13 N SR

In Figures In WordsItem Description QuantityUnit AmountRateSubhead

13 N SR

4

Providing and applying waterproof course including brick bat cobafilling in waterproof cement-mortar in sunk areas in toilets/kitchen/laundry / dirty utility and other floors in required slopesincluding angles, coves, cups, sealing junction of outlet pipes,flanges etc., including waterproofing course in vertical return towall faces upto height varying from 1.2 mtr. to 2.10 mtr.includingwatering, curing, cleaning etc., complete.

a) FloorIn Horizontal surfaces 50 mm thick (1:2:4) cement concrete screedwith water proofing compound well compacted and finished torequired slopes on top (excluding brick bat coba filling). Sq.M 525.00

b) WallsIn vertical surface 10 mm thick (1:4) mix cement-sand mortar withwater-proofing compound plaster to vertical walls including rakingout joints of brick masonary

Sq.M 1100.00

c) Brick bat coba filling in Sunk Portions : Providing and filling in floor below item 1(a) above in sunk portionsbrick bat coba. consisting of following layers : Cu.M 160.00

i)10 mm thick (1:4) mix cement-sand mortar padding mixed withwaterproofing compound.

ii)Broken brick bats laid with joints filled in cement mortar (1:4) mixwith waterproofing compound in required size, thickness and slope.

iii)6 mm thick (1:4) mix cement mortar screed topping with waterproofing compound on brick bat layer with even finish on top.


13 N SR

Note: All items with 10 years guarantee.All the three layers specified at (i), (ii) and (iii) above will bemeasured together in cubic content irrespective of requiredthickness of brick bat in cubic metres.

5

AHU Room : Providing and applying waterproof course inhorizontal planes about 60 mm thick 1:2:4 concrete screed withmixing of waterproofing compound and finally finished with afloating of neat cement including cement slurry, curing etc.

Sq.M 175.00

6 Waterproofing plaster to internal portion of water tank :Providing and applying waterproof plaster average 25 mm thick incement mortar 1:3 proportion (1 cement : 3 fine sand) includingadding waterproofing compound as per manufacturer's specificationand in proportion specified by them including curing.

Sq.M 380.00

7

Watering treatment to chajja/projection over window consist ofplaster of average 25 mm thick in C.M. 1:3 proportion includingmaking brickbat vata at junction of wall and the projection / chajja. Sq. M 137.00

8

Providing and laying 20 mm thick machine cut granite stone slab ofapproved shade in required size to floor including providing andlaying average 25 mm thick (1:4) cement mortar bedding floatedwith neat cement slurry on top and pointing the joints in matchingcolour cement, cutting granite slab to required size, watering,curing, cleaning etc. complete.

Sq.M 260.00


13 N SR

9

Providing and laying in skirting granite slab 20 mm thick ofapproved shade, including providing and laying 1:4 mix cementsand plaster 12 mm thick and neat cement grout and pointing thejoints in coloured cement etc., curing, cleaning, necessary cutting.

Sq.M 30.00

10

Providing and laying 100 mm height fully vitrified tile skirting tomatch with the flooring in the above item including providing andlaying 1:4 mix cement sand plaster backing 12 mm average thickand neat cement grout and pointing the joints in coloured cement tomatch including curing, cleaning and necessary tile cutting.

Thickness to be specified by manufacturersSize of tile 50 x 50 cm/ 45 x 45 cmSize of tile 60 x 60 cm

Sq.M 120.00

11 (PLATFORM) CafeteriaProviding & laying counter in Cafeteria consist of

a)0.6 width top granite counter 20 mm thick fixed on 20 mm bottomrough kadappa support.

b)Side inclined support consist of 20 mm thick granite with 20 mmthick kadappa bottom rough backing.

c) Bottom granite 20 mm t hick approximate width 0.3 mtr.d) Bottom vertical supports of 75 mm height, 2 Nos.e) Buffer wall steel skirting of 75 mm heightf) Middle polished granite shelf of 0.4 mtr. Width.g) 20 mm thick granite facia at top on both sides of platform.


13 N SR

The above work will be done as per sketch for Cafeteria counter.Item includes making notches in wall, making good surface. Theitem will be measured per running meter length. R.M. 40.00

12 Pantry Platform / CounterProviding and laying counter of 0.6 width consist of

a)Top Portion 20 mm thick polished granite fixed over 20 thick roughkadappa.

b)Vertical supports apprx. 775 mm height 20 mm thick polishedgranite with backing of 20 mm one side rough kadappa.

c)Middle support or Shelf – 20 mm thick bottom rough kaddappa.

d) Bottom Polished granite 20 mm thick 0.56 mtr. width.

e)Vertical supports at floor level 2 Nos. each of 75 mm height roughkaddapa.

f)20 mm thick polished granite facia of apprx. 75 mm height at thetop level of counter

g) Buffed wall steel skirting.The item includes making notches in wall/floor and making goodthe same. Filling of cement mortar between granite/kadappa makinga cut out for st. steel sink item will be measured per running meterlength.

R.M. 4.00

13 Wash Basin CounterProviding and laying wash basin counter 0.550 mtr. width consist of:

a)Top 20 mm thick polished granite of approved colour and supportedon 20 mm thick kadappa (width 550 mm.)


13 N SR

b)

Granite 20 mm thick. Slant facia with backing of 20 mm thickkadappa. The item includes making notches in wall, making goodsurface making cut out for oval shape basins, hopes for taps,smoothening the cut out edges. The item will be measured perrunning meter length. The work will be done as per the sketchesdrawing of W.B. counter.

R.M. 65.00

14 Hardonite Skirting:40 mm thick concrete with hardener topping, under layer 28mmthick concrete 1:2:4 (1 cement : 2 coarse sand : 4 grade stoneaggregate 12mm nominal size) and top layer 12mm thick cementhardener consisting of mix 1:2 (1cement hardener mix : 2 gradestone aggregate : 6mm nominal size) by volume hardeningcompound is mixed @ 2 litre per 50 kg of cement or as permanufacturer's specification.

Sq.M 30.00

15

Providing and laying 20 mm thick granite flooring in tread of stepwith 325 mm width in required length including machine cutting,machine polishing and providing and laying 20 mm thick 1:4cement mortar beading including neat cement float.

Sq.M 80.00

16

Providing and fixing 20 mm thick granite slab in risers of steps tomatch with the tread in the above item including providing andlaying average 15 mm thick (1:4) mix cement mortar backing andneat slurry/grout and pointing the joint in colour cement includingmachine cutting, hand polishing etc., complete.

Sq.M 55.00


13 N SR

17Providing and making nosing for granite tread.

R.M 265.00

18 Granite Architraves :Providing and laying 10" (250 mm) x 7'-0" (2100 mm) and 20 mmthick machine cut, machine polished granite architraves of approvedshade laid on 12 mm thici base of 1:3 cement mortar and jointedwith white cement slurry including rubbing and polishing. The itemalso includes rounding off one edge of the granite piece,smoothening the round edge etc., complete.

Sq.M 3.00

19 Toilet Doors Granite Frame :Providing and fixing 20 mm thick machine cut machine polishedapproved quality granite door frame to toilet door opening in twolayers each layer upto 125 mm wide with minimum 75 mmoverlapping including 20 mm thick bedding/backing plaster incement mortar (1:4) mix, rounding, overlap granite fixed withadhesive, polishing the projection edge, watering, curing, providingtemporary support to granite, cleaning etc., complete. Runningmeter of toilet door frame will be measured for payment.

R.M 315.00

20Providing and laying 20 mm thick granite sill for window includingproviding 20 mm thick cement mortar 1:4 bedding including neatcement floor, width to be 300 mm.

R.M 222.00

21

Providing and laying 1:2:4 concrete 40 mm thick for flooring (1cement: 2 coarse sand : 4 graded stone aggregate) finished withfloating coat of neat cement including slurry, watering, curing. Theflooring will be laid in alternate bays. (This specification applies toIPS on wall / panel/skirting


13 N SR

aProviding and laying IPS on wall/Pardi

Sq.M 200.00

b Providing and laying IPS on skirting

Sq.M 28.00

22Providing and Laying 1:2:4 concrete 50 mm thick for step flooring(Tread and Riser) finished with floating coat of neat cementincluding slurry, watering, curling etc. completed

Sq.M 100.00

23

Providing and applying two coats of plastic emulsion paint of AsianPaints or of equivalent approved make and in selected shades overone coat of primer to interior plastered walls, plaster of paris board,concrete surfaces, soffits, ceilings, jambs, arises etc., to give an evenshade. All paint shall be applied as per manufacturer's specificationsincluding necessary preparations to plastered surface for making iteven, levelled asnd smooth prior to application of paint to theplastered surface.

Sq.M 16310.00

24Providing and laying PCC 1:2:4 concrete over rubble solingincluding curing, compacting. 115 mm thick on rubble soling andtriangular shape PCC for steps in auditorium.

Cu.M 683.00

25 Anit-termite Pre-construction Treatment :

a)Supplying chemical emulsion in sealed containers includingdelivery as specified - chlorpyriphos emulsifiable concentrate of20%

Litres 538.00


13 N SR

b)

Diluting and injecting chemical emulsion (to be supplied free of costat site of work) for PRE-CONSTRUCTIONAL ANTI-Termitetreatment and creating a continuous chemical barrier under andalround the column pits, wall trenches, basement emcavation, topsurface of plinth filling, junction of wall and floor, along theexternal perimeter of building,expansiion apron is to be laid,surroundings of pipes and conduits etc. complete as perspecifications (pling area of the building at chlorpyriphosemulsifiable concentraste 20% with 1.0% concentration.

Sq.M 4845.00

26

Providing and laying 230 mm thick dry rubble packing using hardstones, hand set on edge, consolidating the same by ramming withheavy wooden rammers including filling the interstices tightly withhand broken stone spalls (hand broken metal NO. 4) and blidningthe top with 75 mm nominal size stone chips to bring the top surfaceto even level. Note: Rate shall include for levelling and making up the undulations in ithebase before laying rubble packing and ramming, watering andconsolidating.

Sq.M 5170.00

27Kalzip' Aluminium Alloy Sanding Seams Roof Cladding System asmanufactured by Kalzip Asia Pte. Ltd.

i. Top Sheet : Kalzip 65/400 as the outer lining (weather side) ofstanding seams aluminium alloy cladding profile 400 mm widthwith depth 65 mm in 0.90 mm thick with PVDF Finish.

ii. Insulation Layer : 50 mm thick Glasswood Resin Bondedinsulation in 32 Kg/Cu.M. density with one sided vinyl sheet vapourbarrier and GI wiremesh of the size 75 mm x 75 mm x 1.6 mm. Sq.M 3260.00

28 Flashing - in 0.9 mm thickness


13 N SR

29 End Facia and False Ceiling at roof level

i)

Providing and fixing end facia of ACP 4 mm thick as per detaileddrawing with aluminium supporting frame work such as angles of45 x 25 x 3 mm size, aluminium brackets, fasterners, nut, bolt etc.,complete. Any one of the following make shall be used -DURABUILD, ALUCOBOND, ALUDECOR

Sq.M 570.00

ii)

Providing and fixing metal falseceiling at roof level using 4 mmthick ACP panel with supporting aluminium frame work. Any oneof the following make shall be used - DURABUILD,ALUCOBOND, ALUDECOR (Quantity given is for both the items)

Sq.M 455.00

30 Railing

a)

Providing and fixing staircase railing and railing at ramps as perdetails consisting of top 52 mm dia m.s. pipe supported on 125 mmheight 25 mm dia. M.s. pipe at 1.0 mtr. centre to centre. All powdercoated railing will either fixed to parapet wall or o the side wall ofstairs. (Powder coating 7 tank phospating)

R.M 212.00

b) Eliptical Staircase :Providing and fixing railing to balcony parapet as per details consistof vertical 25 mm dia. Pipe 125 mm height at 1.0 mtr. centre tocentre and top of it horizontal member of teakwood 52 mm dia withP.U. matt finish. (M.S. Pipe is powder coated).

R.M 70.00

c) Balcony Railing (Same as above) R.M 52.00

31

Providing and erecting façade/curtain walling of aluminiumanodized sections consist of followiong as per detailed drawings andelevations. The façade will be designed to withstand wind pressureof 1.5 kps. The sizes and dimensions are approximate.


13 N SR

The members given below are for one panel of 4.00 mtr x 10.59 mtr.

Approx. size of the façade is 52 mtr. x 10.85 (ht.)Horizontal - 72 x 55 mm - 8 Nos.Vertical - 4.0 mtr. height - 72 x 55 mm - 4 Nos.Vertical - 4.0 mtr. height - 72 x 55 mm - 4 Nos.Top 2.5 mtr. height panel - vertical dummy embers of 25 x 40 mm -3 Nos.Regular members in this panel 4 Nos. - 72 x 55 mm

32

Horizontal - M.S. box sections 250 x 160 mm cladded with 2 mmthick aluminium sheet (There will be 2 Nos. M.S. Section). Glass tobe 8 mm thick float toughened glass). Sq.M 490.00

33

Providing and fixing in the facade as given above, sliding shutters of8 mm thick float toughened glass (2 Nos. of size 2.0 x 3.0 mtr.) andtwo fix glass panel of size 2.0 m x 3.0 mtr The item to include theautomatic sliding gear arrangement at top of Magnum brand(Mantion make) or equivalent approved.

Sq.M 23.00

34

Providing and laying ACP (aluminium composite panel at cladding.(The area above the façade glazing) consists of 4 mm thick panelincluding providing and fixing supporting aluminium framingincluding scaffolding. Any one of the following make shall be used- DURABUILD, ALUCOBOND, ALUDECOR

Sq.M 260.00

35 Louvers at 1st floor level around D.G. unit area :


13 N SR

Providing and fixing fabricating aluminium louvers as per detaileddrawing made from 4 mm thick ACP (Aluminium Composite Panel)size of box type louvers 200 x 100 mm (200 mm horizontal and 100mm vertical) amd it will be placed at 150 mm centre to centre. Areaas seen in elevation will be measured for payment. Item includesvertical supports, fixing the same to main structure i.e. masonrywalls or concrete surface including necessary clamps, fasteningstraps, nut, bolts, rivets, washers etc.

Sq.M 160.00

36

Providing and fixing in position cut C.P. Teak Wood frame fordoors, windows, ventilators, rough ground, fixed glazing includingproviding and applying two coats of redoxide paint to all hiddensurfaces of t.w. frame in contact with masonry/ concrete as perdetailed drawing. The item also includes providing and fixing M.S.holdfast as described below (cubic contents of teakwood frame asactually fixed will be measured). (Frame size 65 x 175 mm, 65 x150 mm, 75 x 150 mm, 130 xz 65 mm) The item includespainting/polishing the frame with approved make polish or enamelpaint of approved make to match with shutter (one coat of primerand three coats of paint). This item inculse providing M.S.Holdfasts as detail below: Providing and fixing M.S. Holdfasts todoor and window frames, made from mild steel flat size 40 mmwide x 4 mm thick x 400 mm long, one end of hold fast shall bebent at

Cu.M 4.00


13 N SR

right angle and the other end shall be split and turned includingpainting the hold fast with one coat of red lead paint. Hold fast shallbe fixed to frame with 3 Nos. 50 mm GI screws at one end and otherend embedding in wall in cement-concrete block 300 mm x 230 mmx 115 mm size (1:3:6) mix 1 cement : 3 coarse sand : 6 graded stoneaggregate 20 mm nominal size down graded including curing (Note:Where concrete block cannot be provided when frame abutts RCCmember, include cost for providing and fixing hold fast with rawlplugs and screws at two points and for bending and shaping the holdfast to required profile for fixing to RCC member. Nothing extrawill be paid for the same.

37 Doors

A

Providing and fixing in position 38 mm thick solid core flush blockboard shutter (single or double shutter or specified) of approvedmake commercial ply facing or laminate facing of 1 mm thick onboth side as specified in The sizes given below are approximate andexact dimension to be worked out from detailed drawings. Themeasurement shall be outside to outside of shutter. The shutter shallbe exterior quality, Phenol Formaldehyde Synthetic Resin hotpressed. Approved make of door shutter shall be "Kutty" brand ofKutty Flush Door & Furniture Co. Ltd or ANCHOR brandmanufactured by Indian Plywood or equivalent. Hinges will beprovided as per hardware items and same will be paid separately."Veneer" to be of approved make.


13 N SR

B

Providing and fixing in position 38 mm thick partly glazed/fullyglazed/fully panelled door shutters, single or double made from C.P.teakwood as per detailed drawings. The shutter consist of 100 mm x38 mm vertical and top member and bottom member of 150 x 38mm in detailed drawing and wood beading as per details. The itemincludes providing and fixing 8 mm thick float glass or any othertype of glass as specified of approved make. The item includespainting or polishing of approved make (one coat primer and threefinishing coats enamel paint). The sizes given below areapproximate and exact dimension to be wokred out from large scaledrawing. The hinges will be provided as per hardware items andwill be paid separately.

iD2:- 0.9 x 2.15 mtr. - Toilet entry door / Pantry door 38 mm solidcore shutter with both side 1.0 mm thick laminate. Sq.M 12.00

iiD1:- 0.75 x 2.15 mtr. Toilet inside door 38 mm solid core shutterwith both side 1.0 mm thick laminate. Sq.M 90.00

iii D10b :- AHU door size 1.3 x 2.15 mtr.38 mm solid core double shutter with both side enamel painted withvision panel. Sq.M 3.00

iv D4 :- 0.9 x 2.15 mtr. StaircaseFlush door with laminates on both side with vision panel and firerating of one hour 45 mm thick Sq.M 8.00

vD3 :- Flush door 38 mm thick both side laminate.

Sq.M 2.00


13 N SR

viD2c :- Flush door 38 mm thick both side laminate.

Sq.M 17.00

viiD2b :- Flush door 38 mm thick both side with veneer on one sideand laminate on other side. Sq.M 2.00

viii D6a:- 0.9 x 2.15 mtr. 38 mm thick solid core flush door with 1.0 mm thick laminate onboth side. Sq.M 4.00

ix D7 :- 2.0 x 2.45 mtr.38 mm thick partly wood panelled partly glazing 8 mm thick withVeneer finish and melamine polish. Sq.M 5.00

x D7a :- 2.0 x 2.45 mtr.38 mm thick partly wood panelled partly glazing 8 mm thick withveneer finish and melamine polish. Sq.M 10.00

xi UD 2 :- 1.5 x 2.15 mtr.Flush door with enamel paint on both sides 38 mm thick.

Sq.M 6.00

xii UD1 :- 1.0 x 2.15 mtr.Flush door with enamel paint on both sides 38 mm thick

Sq.M 10.00

xiiiD2a:- Toilet Entry 1.0 x 2.15 mtr. Flush door with laminates on bothsides 38 mm thick Sq.M 17.00


13 N SR

xivD3a : Shaft Door (Plumbing) 1.0 x 1.90 mtr., Flush door withenamel paint on both sides 38 mm thick Sq.M 15.00

xvD3b :- Shaft Door 0.6 x 1.90 mtr. Flush door with enamel paint onboth sides. Sq.M 5.00

Acoustical Door :

xvi

D11 :- 1.8 x 2.45 mtr.68 mm to 75 mm thick, 2 hour fire rated door, veneer on both sides,acoustical door with glass wool infill and melamine polish. Sq.M 45.00

xviiD11d :- 1.20 x 2.15 mtr.68 mm to 75 mm thick, 2 hour fire rated door, veneer on both sides,acoustical door with glass wool infill and melamine polish.

Sq.M 6.00

xviiiD10a :-1.3 x 2.15 mtr. Flush door, swing door with vision panel laminated on both sides, 38 mm thick

Sq.M 3.00

xixD10b :- 1.3 x 2.5 mtr. Flush door, swing door with vision panel laminated in both sides 38 mm thick

Sq.M 3.00

xx D3c :- 1.8 x 1.9 mtr. (Electrical shaft door)38 mm solid core shutter enamel painted.

Sq.M 15.00

xxiD6 :- 1.0 x 2.15 mtr. panelled door with veneer on both side

Sq.M 2.00


13 N SR

xxiiD6a :- 0.9 x 2.15 mtr. Flush door, with Laminate on both sides

Sq.M 4.00

38SILICONE sealent to external junction of window and masonry :

Providing and applying 5 mm x 5 mm deep SILICONE sealent toexternal junction of windows and masonry/RCC members in allfloors including raking out of joints in cement plaster to requireddepth and width, cleaning, scaffolding etc., complete.

R.M. 1065.00

39

Providing and fixing the following hardware with screws to doorshutters, frame etc., including making good the surface (allhardware shall be Magnum Make Mukund Overseas or equivalentapproved SS finish/SS finish/satin nickel finish (For details, see thespecification section)

a) Pull HandlesSets 68.00

b) Hinges 4" x 3" x 3 mm thickNos. 260.00

c) Hinges 5" x 3" x 3 mm thickNos. 117.00

d) Hinges 6" x 4" x 4 mm thickNos. 160.00


13 N SR

e) Door CloserNos. 130.00

f) Tower BoltNos. 82.00

g) Mortice lock, Cylinder lever handle on plate YDS60Nos. 40.00

h) Cylindrical lock (Toilet)Nos. 55.00

i) Baby latchNos. 55.00

j) Panic deviceNos. 4.00

k) Lever handleSets 35.00

l) Dead bolt (for shaft door)Nos. 12.00

m) Cylinder/half cylinder with key for shaft doorNos. 12.00

n) Door stopper with rubber bushingNos. 20.00


13 N SR

o) Nylon Buffer 3" size to be fixed to wallNos. 82.00

p) Robe hook in bathNos. 50.00

q) Floor SpringNos. 25.00

r) Mortis Lock with YDS 90 mm. All other descriptions same asitem (g) above. Nos. 18.00

40Providing and laying wooden panelling as per drawing 3 mmveneer, 19 mm ply with teakwood lipping on all size. Sq.M 28.00

41 Aluminium Windows/Curtain Walling :Providing and fixing 20 micron (+) or (-3) microns matt finishanodized aluminium casement/fixed glazing louveredwindow/sliding window made out of section as given under andalong with all the standard accessories such as butt hinges, EPDMgaskets/weathering, two point handle cum lock, aluminium clits etc.and having 5.5 mm x 6.0 mm thick float glass as specified and madeas per elevation shown in drawing. The approx. weight ofaluminium section for casement and sliding window is as follows :-Item also includes providing and fixing M.S. holdfasts of size 400 x40 x 4 mm

Sliding window 3 track bottom 1.3 kg/m


13 N SR

vertical, top 1.01 kg/m2 track bottom 0.93 kg/mvertical, top 0.69 kg/mShutter lock/handle section vertical 0.49 kg/mInter locking mullian vertical 0.69 kg/mHoizontal top 0.47 kg/mbottom 0.47 kg/mCasement Windows Frame top & bottom 0.43 kg/mShutter 0.65 kg/mBeading 0.224 kg/m

iW1 :- 1.20 mtr. x 1.68 mtr. (glazing to be 6 mm thick) Sliding

Sq.M 295.00

iiW2 :- Toilet window 1.2 x 1.68 mtr. full louvered aluminiumwindow with 6 mm thick glass thick glass fixed louvers. (glass to befrosted)

Sq.M 80.00

42 Wood skirting :Providing and fixing teakwood skirting 12 mm thick and upto 60mm height overall including side lap and finishing with PU coat. R.M 270.00

43

Cutting pockets/chases/opening in lift lobby on all floors and for carlifts block masonry / RCC members in following items as perrequirements of Elevator Contractor and grouting in position thefittings, specials, provided by the Elevator Contractor incement-mortar (1:2) including scaffolding wherever required,watering, curing, cleaning etc., complete as directed by the Engineer-in-Charge.


13 N SR

a100 x 235 x 70 mm deep pockets for fixing hall lanterns.

Nos. 2.00

bFixing passenger lift entrance cill of approx. size 900 mm x 100 mm

Nos. 1.00

cDoor hanger

Nos. 1.00

44

Providing and erecting in position salwood bullies scaffolding insize in lift shafts to full height as per requirement of ElevatorContractor for erection of lifts and removing of the same aftercompletion of elevator work and as directed by the Engineer-in-Charge.

Note: Scaffolding will generally consist of Salwood bully verticalposts approximately 130 mm dia. 9 Nos. per lift and horizontal tiesat every 1.50 mtr. And cross bracing as required and directed by theEngineer-in-Charge. For lifts for a period of 6 months

Lift size : 2.5 mtr. x 2.5 mtr. x 8.0 mtr. heightNos. 1.00

45 Non-shrink GroutPressure Grouting below base plates, foundation bolts, includingpockets, with capital GP2, SIKA small grout 214 or equivalentincluding cleaning, vibrating, etc., complete. Mortar is to bemachine mixed 1:1. Minimum 200mm head of pressure.

Cu.M. 1.00

Total for Subhead 13

In Figures In WordsItem Description Quantity Per Amount

RateSubhead 13 N SR

a100 x 235 x 70 mm deep pockets for fixing hall lanterns.

2.00 Nos.

bFixing passenger lift entrance cill of approx. size 900 mm x 100 mm

1.00 Nos.

cDoor hanger

1.00 Nos.

44

Providing and erecting in position salwood bullies scaffolding insize in lift shafts to full height as per requirement of ElevatorContractor for erection of lifts and removing of the same aftercompletion of elevator work and as directed by the Engineer-in-Charge.

Note: Scaffolding will generally consist of Salwood bully verticalposts approximately 130 mm dia. 9 Nos. per lift and horizontal tiesat every 1.50 mtr. And cross bracing as required and directed by theEngineer-in-Charge. For lifts for a period of 6 months

Lift size : 2.5 mtr. x 2.5 mtr. x 8.0 mtr. height1.00 Nos.

45 Non-shrink GroutPressure Grouting below base plates, foundation bolts, includingpockets, with capital GP2, SIKA small grout 214 or equivalentincluding cleaning, vibrating, etc., complete. Mortar is to bemachine mixed 1:1. Minimum 200mm head of pressure.

1.00 Cu.M.

Total for Subhead 13

SECTION B

SL.NO. DESCRIPTION UNIT QTY AMOUNTfigures Words

1.0 EQUIPMENTS - Makes - Grundfoss, ITT, Wilo

Supply, installation, testing and commissioning of equipement as specified and shown on the drawing with all materials and components conforming and duly certified by Bureau of Indian Standards TAC and local fire authorities

a) Motors and drive assemblyb) Starter and control panels wherever specifiedc) Control, safety & indicating instrumentsd) Interconnected power and control cablinge)Flanged inlet and outlet connectionsf) Enclosure suitable for the ambientg) Supports and mounting frameh) Vibration Isolatorsi) Initial charge of lubricantsj) Pressure guages,thermowell,drain and vent at the water connection wherever required. k) Anticorrossive coating and painting to statutory requirements

1.1 CLEAR WATER VERTICAL INLINE PUMPS

Pumps as specified and shown on the drawing complete with vertical

PONDICHERRY CONVENTION CENTRE

PLUMBING BOQ (Subhead N-14)

RATE

SL.NO. DESCRIPTION UNIT QTY AMOUNTRATEsubmersible mixed flow pump directly coupled motor as indicated:

a) Cast iron casing CI - 40 - FG - 200b) Bronze impellar BR - IS - 318 - GR - GB - IIc) Cast Steel EN.8 Shaftd) Stainless steel shaft sleeves SS - 410e) Direct coupled squirrel cage induction motor with class F insulation and IP 55 protection

1.1.1 Domestic water pump (1+1) & AC make up pumps Each 4300 lpm, 4.0 bar, 4.0 kW, 2900 rpm

1.1.2 Flushing water pumps (2+1) Each 2400 lpm, 4.0 bar,5.6 kW, 2900 rpm

1.2 DEWATERING SUMP PUMPS

Vertical free standing single stage nonclog fully submersible water water 'dewatering pumps suitable for particle size indicate complete with :

a) Cast Iron FG 200 casing and diffusserb) Cast Iron FG 200 impellar and wear platec) Cast Steel EN8 shaftd) Dry, fully submersible, totally sealed sq.cage induction motor with class F insulation, moisture and temperature sensore) Maintenance free seals and bearingsf) Eyebolt and lighting chain

SL.NO. DESCRIPTION UNIT QTY AMOUNTRATEg) 10 m long under water power and control cable with resin filled water tight cable entryh) Level control and switches

1.2.1 Sump pump (1+1) Each 2150 lpm,1.5 bar, 1.0kW, 2900 rpm for 5 mm particle

1.3 HYDRO PNEUMATIC SYSTEM

Supply,installation, testing and commissioning ofcontrol panel as specified complete with :

a) Pressurised Vessel and Central Systemb) Incoming and outgoing feedersc) Starters, contactors and relaysd) Automatic operation and cycling of pumpse) Measuring and indicating instrumentsf) Copper busbars and interconnectiong) Earthingh) Sheet steel compartmentalised enclosurei) Painting of sheet steel enclosurej) Painting of sheet steel enclosurek) Pressure Vessel & Controls

l) Cabling between Pumps and Control Panel 7.0m/Pump

1.3.1 Domestic water pump (1+1) & AC make up pumps Each 2

SL.NO. DESCRIPTION UNIT QTY AMOUNTRATE

1.3.2 Flushing water pumps (1+1) Each 1

1.4 PUMP CONTROL PANEL

a) Incoming feederb) Outgoing feedersc) Soft startersd) 1 set Auto manual changeover switch with pump rotatione) 1 set high/low level controller and control wiringf) 1 set RYB indicating lamp with fusesg) 2 sets ON/OFF

1.4.1 Sump pumps Each 1

TOTAL FOR 1.0

2.0 SANITARY APPLIANCES furnished separately

Makes of ceramic appliances - Parryware, Hindware, Cera Makes of CP fittings - Hindware , Parryware , Jaguar Model no. refer attached list

2.1 EUROPEAN WC ASSEMBLY


Providing and fixing white vitreous china pedestal type water closet (European type) WC pan, conforming to IS : 7231 complete with PVC seat, seat cover,3 litre / 6 litre low level white PVC dual flushing cistern, 15 mm CP brass angular stop cock with 0.3 mm flexible pipe for water inlet CP health faucet with angular stop cock, 1.5m long flexible pipe and hand operated spray 32mm PVC flushing pipe, all fittings and fixtures complete including cutting and making good the walls and floors wherever required

2.1.1Floor mounted water closet assembly with 530 x 410mm WC Each 31

2.2 URINAL ASSEMBLY

Providing and fixing white vitreous china flat back half stall urinal conforming to IS : 2556 complete with 15 mm CP brass manual push type flush valve with spreader, CP brass waste coupling, PVC P-trap and all fittings and fixtures complete including cutting and making good the walls whenever required

2.2.1 Urinal assembly with flat back urinal 590 x 390 x 370 cm Each 48

2.3 WASH BASIN ASSEMBLY


Providing and fixing white vitreous china wash basin conforming to IS : 2556 complete with CI brackets, CP brass pillar cock, angle stop cock and flexible, 32 mm CP brass waste & bottle trap including all fittings and fixtures, cutting and making good of walls, painting of brackets etc.

2.3.1Wash basin assembly with wall hung wash basin 460 x 360 mm Each 32

2.3.2Wash basin assembly with Pedestal wash basin 550 x 400 mm Each 4

2.3.3Wash basin assembly with Counter wash basin 510 x 550 mm Each 3

2.4 KITCHEN SINK ASSEMBLY

Providing and fixing stainless steel AISI 304 (18/8) kitchen sink conforming to IS : 13983 with wall mounted sink cock with swiging casted spout , CP 40 mm CI waste and bottle trap including all fittings and fixtures, cutting and making good of wall, painting of brackets etc.

2.4.1Kichen sink assembly with single bowl sink with drain board 1145 x 510 mm Each 3

2.5Providing and fixing of 15 mm CP sanitary fitting including cutting and making good of walls


2.5.1 Angle stop cocks Each 6

2.5.2 Bib cocks Each 2

2.6 WASH ROOM ANCILLARIES

Providing and fixing of wash room ancillaries with all fixing materials including cutting and making good of walls

2.6.1 Recessed toilet paper holder - 150 x 150 mm Each 3

2.6.2 Recessed soap holder - 210 x 150 mm Each 3

2.6.3 CP towel rack - 225 x 600 mm Each 2

2.6.4 CP towel rod - 20 dia x 600 mm Each 4

2.6.5 CP towel ring Each 6

2.6.6 CP robe hook Each 40

SL.NO. DESCRIPTION UNIT QTY AMOUNTRATE2.7 WASH ROOM FOR PHYSICALLY CHALLENGED

Providing and fixing wash room for physically challenged complete with sanitary appliances, CP brass fittings, wash room ancillaries, CP brass grab rails etc. complete with all fixing materials including cutting and making good of walls Set 8

1 no. floor mounted EWC with integral cistern1 no. wall hung wash basin 450 x 280 mm2 nos. 15 mm CP brass angle cock and 300 mm long flexible pipe1 no. 15 mm CP pillar cock1 no. 32 mm waste, coupling and bottle trap1 no. surface mounted toilet paper holder1 no. surface mounted soap dish5 nos. 35 mm dia 600 long grab rail1 no. 35 mm dia 760 long hinged rail

2.8 Shower Assembly

Providing and fixing CP brass shower assembly with all fittings and fixtures complete including cutting and making good the walls

2.8.1 Shower assembly complete with Each 1

a) 1 no. bib cock b) 1 no. concealed stop cock c) 1 no. shower arm and head

TOTAL FOR 2.0


3.0 VALVES Makes - Prince, Supreme, Sangir, George Fisher

Supply, Installation, Testing and Commissioning as specified and shown on the drawings complete with :

a) Class PN10 or higher rating as indicated Valves with renewable trim , stem and sealb) Non Rising Spindlec) Additional Supports for valves above 65

3.1 BALL VALVES

Threaded Ball Valves witha) P.P. Body & End Pieceb) P.P. Ball with PTFE Sealc) M.S. Zn. PU coated with flexible PVC sleeve handle d) Composit union on both sie of valves

3.1.1 16 mm Each 4

3.1.2 20 mm Each 21

3.1.3 25 mm Each 5


3.1.4 32 mm Each 2

3.1.4 40 mm Each 2

3.1.5 50 mm Each 4

3.2 BUTTERFLY VALVES

Wafer Disc butterfly valve with

a) P.P. Bodyb) P.P. Discc) SS304 Handle / Leverd) Sandwiching flanges with gasket, Nut and bolts

3.2.1 50 mm NB Each 6

3.2.1 63 mm NB Each 4

TOTAL FOR 3.0

4.0 INTERNAL PIPING WORK


Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 UV stablished and anit microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittrings i/c fixing the pipe with clamps at 1.00m spacing. This includes testing of joints complete as per direction of Engineer in charge

4.1 65 mm OD Metre 40

TOTAL FOR 4.0

SECTION C

In Figures In Words

1

Supplying, installation, testing and commissioning ofelectric driven main fire pump suitable for automaticoperation and consisting of following :complete in allrespect as required 2 Seta) Horizontal type, multistage, centrifugal, split casingpump of cast iron body & bronze impeller with stainlesssteel shaft, mechanical seal to ensure a minimumpressure of 3.5 kg/sq.cm. at highest and farthestoutlet at specified flow of 2820 lpm at 70 m. headconforming to IS 1520

b) Suitable HP SQ cage induction motor, TEFC,synchronous speed 1500 RPM, suitable for operationon 415 volts, 3 phase 50 Hz. AC with IP 55 protection

AMOUNT

FIRE FIGHTING NSR (Subhead 15)PONDICHERRY UNIVERSITY CONVENTION CENTRE

RATESubhead 15 NSR DESCRIPTION QTY UNIT

for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS - 325

d) Suitable cemet concrete foundation duly plasteredwith anti vibration pads

2

Supplying, installation, testing and commissioning ofelectric driven pressurisation pump suitable forautomatic operation and consisting of following :complete in all respect as required 1 Seta) Horizontal type, multistage, centrifugal pump of castiron body and bronze impeller with stainless steelshaft, mechanical seal and flow of 180 lpm at 70 mhead conforming to IS : 1520

b) Suitable HP SQ cage induction motor TEFC typesuitable for operation on 415 volts, 3 phase 50 Hz.AC with IP 55 class of protection for enclosure,horizontal foot mounted type with Class -'F' insulation,conforming to IS : 325

c) M.S fabricated Common base plate, coupling,coupling guard, foundation bolts etc. as required

In Figures In WordsAMOUNTRATESubhead

15 NSR DESCRIPTION QTY UNIT

d) Suitable cement concrete foundation duly plasteredand anit vibration pads

3

Fabrication, supplying, installation, testing andcommissioning of electrical control panel of cubicalconstruction, floor mounted type, fabricated out of 2mmthick CRCA sheet, compartmentalised with hingedlockable doors, dust and vermin proof, power coated ofapproved shade after 7 tank treatment process, cablealley, internconnections, having swtichgears andaccessories mounting and internal wiring, earthterminals, numbering etc. complete in all respect,suitable for operation on 415V, 3 phase, 50 Hz. ACsupply with enclosure protection Class IP 42 asrequired. 1 Set

A COMMON PANEL IN FIRE PUMP HOUSE

i) INCOMERa) 400 Amps TP&N MCCBb) Voltmeter (0-500 Volts) with selector switchc) Ammeter (0 - 500 Amps) with selector switch &CT's etc.d) Set of 3 Phase indicating lampe) Set of Al.bus bar 500 Amps

ii) OUTGOING

a) Main fire pump2 nos. 250 Amps MCCB with suitable HP fullyautomatic star/delta starter with over load protection,current sensing type single phase preventor completewith all accessories and internal wiring required forautomatic operation selector switch for local/remote,auto/manual/OFF operation

b) Jockey pump1 no. 25 Amps MCB with suitable HP fully automaticstar/delta starter



with over load protection, current sensing type singlephase preventor complete with all accessories and internal wiringrequired for automaticoperation selector switch for local/remote,auto/manual/OFF operation

B MAIN FIRE PUMP CONTROLa) 1 no. 250 Amps, MCBb) Voltmeter (0-500 Volt) with selector switchc) Ammeter (0 - 300 Amps) with selector switch &CTsd) Set of 3 phase indication lamp

e) Suitable HP fully automatic Star/Delta Starter withover load protection, current sensing type singlephase preventor complete with all accessories andi t l i i i d f t ti tiinternal wiring required for automatic operations

f) Selector switch for local remote, auto/manual/offoperation

C SYSTEM CONTROLLER

Designing, supply, installation, testing andcommissioning of system controller to control operationof Main Electric Fire Pump, Pressurisation Pump insequence as per specification consisting of relays,timers, sensors, annunciation window for faultindication, complete as per specification

4INDICATION PANEL IN FIRE CONTROL ROOM

1 Job



Fabrication, supply, installation, testing andcommisisoning of wall mounted remote indicationpanel for fire fighting system fabricated from not lessthan 1.6mm thick CRCA sheet, powder coated ofapproved shade, complete internal wiring, indicatinglamps, relays, accessories, numbering, letteringcomplete in all respect and consisting of the followingas requireda) ON/OFF indication of Main Electrical Fire Pump,Pressurisation Pump, Terrace Pumpb) Audio/Visual indication of operation of MainElectric/Diesel Fire Pump and Terrace Pump withreset push buttonc) Pressure indication in Fire fighting system(pressure tansducer to be installed under separateitem)

5

Supplying, installation, testing and commissioning ofannunciation panel made out of not less 1.6mm thickCRCA sheet powder coated in approved colour withlocking arrangement, audio and visual indication offault and operation of automatic sprinkler, systemmonitoring including providing and fixing the following,connections, interconnections etc.complete asrequired. The Panel shall be Microprocessor type 1 Joba) Monitoring 10 Nos. of flow switches

b) Monitoring the open circuit, short circuit & earthfault in control cable between panel and flow switches

c) Battery charger trickle cum boost to take completeload of annunciation panel complete with indication oflow battery voltage mains failure and otheraccessories including providing and fixing of 2 nos. 12volts 24 AH each sealed maintenance free batteries

d) Audible alarm



6

Providing laying, testing and commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/3589including fittings like elbows, tees, flanges,tapers, nutsbolts, gaskets etc. in ground including excavation andproviding cement concrete blocks as supports,anticorrosive treatment with coal tar/asphalt tar as perIS : 10221, refilling the trench etc. of following sizescomplete as required.

a) 200 mm dia (wall thickness 6 mm)10 m

b) 150 mm dia450 m

c) 100 mm dia 100 m

d) 80 mm dia30 m

7

Providing, laying, testing and commissioning of 'C'class heavy duty MS pipe conforming to IS 3589 and1239 including fitting like elbows, tees,flanges, tapers,nuts bolts, gaskets etc. fixing the pipe on thewall/ceiling with suitable clamps and painting with twoor more coats of synthetic enamel paint of requiredshade complete as required.

a) 200 mm dia (wall thickness 6 mm20 m



b) 150 mm dia80 m

c) 100 mm dia90 m

d) 80 mm dia150 m

e) 65 mm dia80 m

f) 50 mm dia160 m

g) 40 mm dia200 m

h) 32 mm dia120 m

i) 25 mm dia500 m

8

Supplying and fixing single headed internal hydrantvalve with instantaneous Gun metail couplings of 63mm dia with cast iron wheel ISI marked conforming toIS : 5290 (Type A) with blank Gunmetal cap and chainas required 7 Each



9

Supplying and fixing single headed external yardhydrant valve with 1 no 63 mm dia instantaneous FMgun metal coupling and cast iron wheel ISI marked,conforming to IS : 5290 (Type A) with blank gun metalcap and chain as required 6 Each

10

Supplying, fixing, testing and commissioning ofbutterfly valve PN 1.6,with Bronze/Gunmetal seat dulyISI marked complete with nuts, bolts,washers, gaskets,conforming to IS :13095 of following sizes as required

a) 200 mm dia 4 Each

b) 150 mm dia10 Each

c) 100 mm dia18 Each

d) 80 mm dia10 Each

e) 50 mm dia2 Each

11

Supplying and fixing orifice plate made of 6 mm thickstainless steel with orifice of required size in betweenflange and landing valve of external and internalhydrant to reduce pressure to working pressure of 3.5kg/cm2 complete as per specifications as required. 6 Each



12

Providing, installation, testing and commissioning ofdual plate non-return valve of following sizesconforming to IS : 5312 complete with rubber gasket,GI bolts, nuts, washers etc. as required

a) 150 mm dia2 Each

b) 80 mm dia1 Each

13

Providing, installation, testing and commissioning ofstainless steel stainer fabricated out of 1.6 mm thickstainless steel sheet with 3 mm dia holes with stainlesssteel flange13 steel flange

a) 200 mm dia2 Each

14Providing, installation, testing and commissioning ofgun metal valves of following sizes as required

a) 50 mm dia2 Each

b) 40 mm dia2 Each

c) 32 mm dia2 Each



15

Supplying and fixing 63 mm dia 15 mt. long RRL hosepipe with 63 mm dia Male and Female Gun metalcouplings duly binded with GI wire, rivets etc.conforming to IS : 636 (Type A) as required 28 Each

16

Supplying and fixing First-Aid hose reel with MSconstruction spray painted in post office redconforming to IS : 884 with upto date amendments,complete with the following as required 14 Each

a) 20/30/40 m long 20 mm (nominal internal) dia waterhose thermoplastic (textile reinforced) Type - 2 as perIS : 12585b) 20 mm (nominal internal) dia gun metal globe valveand nozzle

c) Drum and brackets for fixing the equipments on wall

d) Connections from riser with 40 mm dia stop valve(gun metal) and MS pipe

17

Supplying and fixing of hose cabinet of size 900 mm x600 mm x 500mm made of 2mm thick MS sheet with 6mm thick glazed glass doors i/c necessary lockingarrangement suitable to accommodate external hydrantwith butterfly valve, 2 nos. 15 mt. long hose pipe, 1 no.branch pipe, mounted on wall OR raised brick platformand duly painted with post office red externally andwhite internally with synthetic enamel paint complete inall respect, for external hydrant as required 6 Each

18

Supplying and fixing 63 mm dia Gun metal branch pipewith 20 mm (nominal internal diameter) size Gun metalnozzle conforming to IS:903 suitable for instantaneousconnection to interconnect hose pipe coupling asrequired 13 Each



19

Supplying and fixing 4 way fire brigade connection ofcast iron body with 4 nos. Gun metal maleinstantaneous inlet couplings complete with cap andchain as required for 150mm dia MS pipe connection,conforming to IS : 904 as required 1 Each

20

Supplying and fixing 3 way FBC of CI body with 3 nos.Gun metal male instantaneous inlet couplingscomplete with cap and chain as required. For 150mmdia MS pipe connection conforming to IS : 904 asrequired 1 Each

Supplying and fixing air vessel made of 250 mm dia, 8mm thick MS steel, 1200 mm in height with air releasesvalve on top and flanged connection to riser, drainarrangement with 25 mm dia gun metal wheel valve,with required accessories, pressure guage and

21

q , p g gpainting with synthetic enamel paint of approved shadeas required 1 Each

22

Providing fixing testing and commissioning of 15 mmsize quartzoid bulb type sprinklers, of rating 68 deg. Cpendent with requried accessories 350 Each

23

Providing and fixing pressure switch in the MS pipeline including connection etc. as requried

4 Each

24

Providing & fixing flow switches in 100/150 mm dia MSpipe

2 Each

25

Providing & fixing pressure transducer in MS pipe line(pressure range 0 - 10 kg/cm2)suitable for 12 volts/24volt DC including connection etc.as required 2 Each



26

Providing and fixing, testing and commissioning ofinstallation control valve of cast iron body andbrass/bronze working parts comprising of water motoralarm, bronze seat clapper, and clapper arm, hydraulicdriven mechanical gong bell to sound continuous alarmwhen the wet riser/sprinkler system activates, pressureguages, emergency releases,strainer, pressure switch,cock valve complete with drain valve and bypass testcontrol box, ball valves, MS pipe of requried size,flanges,orifice plate, gasket etc. of size 150 mm dia asrequired 1 Each

Providing and fixing angle iron (40 mm x 40 mm x 5mm) door frame and MS sheet (2 mm thick) cum glassshutter of size 2.1 mt. x 1.2 mt. (NS) with 25 mm x 25mm x 3mm angle frame all around and stiffened in

27

gbetween i/c hinges, handle, locking arrangement,painting with approved synthetic enamel paint i/c signwriting on glass at internal hydrant including providing& fixing MS sheet 2 mm thick on remaining portionabove door to close opening i/c painting etc. asrequired 7 Each

28Supply & installation of recessed break glass unit, addressable 20 Each

29Supply and installation of recessed hooters, addressable 20 Each

30

Supply and installation of photoelectric type of smoke detectors, addressable suitable for installation above false ceiling, below false ceiling and below false floor. 105 Each

FIRE ALARM SYSTEM



31

Supply & installation of heat detectors, addressablesuitable for installation above false ceiling, below false ceiling and below false floor. 15 Each

32Supply & installation of Isolation modules, addressable 22 Each

33Supply & installation of Control modules/AC cut-off units 18 Each

Supply & installation of beam detectors complete with transmitter/receiver and other accessories, range of 100 meters, wall mounted (23 deg.

34a ge o 00 ete s, a ou ted ( 3 deg

Vertical and 90 deg. Horizontal) 4 Set

35

Supply, installation, testing and commissioning of analogue addressable fire alarm panel complete with fixing accessories, fire/fault indication, test/silence buttons, AC/DC ammeter, fuses, SMF batteries suitable for 400 address etc. 1 Each



36

Providing window based software programme for graphic display in PC (PC to be supplied by others) 1 Each

37

Wiring for the break-glass,detectors and hooters complete with accessories,pulling and termination of 2C-1.5 sq.mm twisted shielded cable in PVC SFT conduit with fixing accessories such as clamps, saddles etc. 5600 Metre

38Supply, installation, testing & commissioning of Xenon strobe unit, IP 44 2 watts 2 Each

39 Remote response indicator 40 Each

TOTAL

SECTION D

17

SL.NO. DESCRIPTION UNIT QTY AMOUNTFigures Words

17.1 Supplying, installation, testing and commissioning of Set 1indoor type floor mounted metal clad, 22 KV VCB panelwith 1 no. VCB, total enclosed & fully interlocked,horizontal drawout, horizontal isolation type breaker asper IS : 13118, as amended up to date and additionalspecifications, having capacities as mentioned below,single break, trip free mechanism, manually charged andmanually closing breaker suitable for use on 22 KV, 3phase, 50 Hz A.C. supply with short circuit fault level of350 MVA, complete with self contained, fully interlocked,rack in and rack out mechanism, air insulated but encapsulated copper bus bars of 630 Amps capacity,breaker featured with mechanical ON/OFF indicator withhand trip device, spring release coil, shunt trip coil andauxiliary switch of 4 NO + 4 NC and equipped includingconnections suitable for 3C x 185 sq.mm XLPE 22 KVcable (cable entry from x bottom), end termination withheat shrinkable jointing material etc. as required Note - Cost of end termination not included in this item)

a) Incoming/outgoing no. 630 Amp. VCBb) 1 no. 22 KV/110Volts PT, Class 0.5 accuracy and 100 VA burden with 1 no. voltmeter (0-24 KV), digital type, selector switch for voltmeter and protection fuses/MCB for HT metering upto 22 KV on incomerc) 1 no. 22 KV (0-100A) ammeter, digital type, selector switches for ammeterd) 1 no. microprocessor based numerical relay with O/L,

PONDICHERRY UNIVERSITY

CONVENTION CENTRE

NON SCHEDULE ITEMS

RATE

E/F and S/C protectione) 1 no. - set of dual core dual ratio 3 CTs 100/50/5/5A of 15VA burden and accuracy Class - 0.5 for metering and class 5P10 for protection

17.2 Supplying, installation, testing and commissioning of Job 1power pack with 220 volt AC input & 24 volt DC continuous output suitable for closing/tripping/indication 1 no. HT panel boards with 2 nos. 12 volts each maintenace free batteries of 100 (or suitable) AH each,charging unit, capacitor bank for emergency deliveringfor trip system complete with suitable capacity ofAmmeter & Voltmeter including connections with 2.5 sq.mmFLRS insulated copper conductor cable etc. as required

17.3 Supplying, installation, testing and commissioning of Each 12000 KVA, 22/0.433 KV, 3 phase, 50 Hz, Dyn11, indoorONAN type, copper wound transformer with OFF loadtap changing arrangement on HV side in steps of ± 2.5%,- 5% to + 15% having cable end boxes on HV side suitablefor 3 x 185 sq.mm XLPE cable of 22 KV grade and 4000Amps bus trunking arrangement on LV side complete with all accessories including first filling of filtered dehydratedoil and confirming to IS 2026 (Part 1 to Part 5) and as per specification attached complete in all respects as

required at site with grouting of Channels, civil foundation if any, etc required for the foundation of transformer. The rate of Transformer is inclusive of cost of foundation work required to be done inside the building or outside the buiding.

17.4 Supply, installation, testing and commissioning of 3200 Metre 12Amps pre-fabricated sandwitched bus trunking suitable for 415 volt 3 phase 4 wire 50 Hz. AC supply system (between transformer's LT side and incomer of LT panelside) of copper bus bars complete with bends, expansion

joints, fire barriers, copper flexible end connections atboth ends. Earthing with 2 runs of copper earth of size25 mm x 5 mm strips etc. including necessary supports etc.as per specifications attached as required

Note : The bus trunking shall be measured along the length of enclosure. The copper strips whichwill go inside LT panels and end termination boxesof transformers shall be not be taken into measurement of bus trunking quantity

17.5 Supply, installation, testing and commisisoning of cubical Each 1type LT panel suitable for 415V, 3 phase, 4 wire 50 HzAC supply system having front surface area 20 sq.m(approx) fabricated in compartmentalized (preferably) design from CRCA sheet steel of 2 mm thick for framework and covers, 3 mm thick for gland plates including cleaningand finishing complete with 7 tank process for powdercoating in approved shade, having 3200 Amp capacityextensible type TPN tinned copper bus bars of highconductivity, DMC/SMC bus bar supports, with shortcircuit withstand capacity of 31 MVA for 1 sec. bottombase channel of MS section not less than 100 mm x 50 mm x 5 mm thick, fabrication shall be done in transportable sections, entire panel shall have a commoncopper earth bar of size 25 mm x 5 mm at the rear with2 nos. earth stud, solid connections from main bus bar to switch gears with required size of Cu. Bus bars andcontrol wiring with 2.5 sq.mm PVC insulated copperconductor S/C cable, cable alleys, cable gland plate intwo half, including providing following swithgears

I) Incomings2 nos. - 3200 Amps each four pole horizontal drawouttype air circuit breaker of fault breaking capacity 50 KA(Ics-Icu upto 433V) motor operated, fitted with interlockeddoor, automatic safety shutters, mechanical ON/OFF

and service/test/isolated position indicators and frameearthing contact, conforming to IS 13947-2 1993 asamended up-to-date complete with following accessoriesfor each ACB

a) Independent manual spring closing mechanism - 1 no.b) Microprocessor release (EMI & EMC certified) for over current, earth fault an short circuit protection - 1 setc) 96mm square flush pattern d) Digital load manager with RS 485 port 3 nos. CT's of ratio 3200/5A Class I accuracy and 15 VA burden back-up MCB etc.e) 3 nos. phase indication LED lamps with 2 amps back up HRC fuse breaker 'ON' indicating light with 2A HRC fuse test terminal block set, fuses, circuits as pre- standard practice, auxiliary contacts for positive interlocking of the breakers as required - 2 setsf) Shunt trip coil 220V AC

III) Bus Bars AmpsTPN tinned copper bus bars of minimum of 3200 Ampscapacity with heat shrinkable coloured sleeves and includingDMC/SMC bus bars supports at required intervals complete for cross section, size supports and theirspacing etc. for withstanding fault level of 31 MVA for1 sec.

IV) InterlockingElectrical through advance contacts in ACB's (Incomers)and mechanical (castel key) interlocking should be provided to ensure that only one supply is available at atime and to eliminate any possibility of accidentallyapproaching two supplies

V) Outgoing1) a) 1 no. 1250 amp 4 pole MCCB Amps

(Ics = 35 kA upto 433V)

b) CT's of ratio 1250/5 Amps 1 set (1 set 3 nos.)c) Digital type ammeter (0 - 1250 Amp) with selector switch 1 set

2) a) 2 nos. 800 amp 4 pole MCCB Amps (Ics = 35 kA upto 433V)b) CT's of ratio 800/5 Amps 2 sets (1 set of 3 nos.)c) Digital type ammeter (0 - 800 Amp) with selector switch 2 sets




6) a) 2 nos. 125 amp 4 pole MCCB Amps (Ics = 25 kA upto 433V)b) CT's of ratio 125/5 Amps 2 sets (1 set of 3 nos.)

c) Digital type ammeter (0 - 125 Amp) with selector switch 2 sets

Total for Sub Head I

17.6

Supply erection testing and commissioning of approved make 185 Sq.mm Aluminium Armoured 22 KV grade XLPE UG cable - HT Cable. Unit cost of cable shall exclude laying, excavation, back filling of trenches etc. & this cost shall be measured somewhere else.

17.6.1 a) 3C x 185 sq.mm Metre 50

17.7

Supplying and making INDOOR cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 22 kV grade as required.

17.7.1 a) 185 / 240 sq.mm. Each 2

17.8

Supplying and making OUTDOOR cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for the following size of 3 core, XLPE aluminium conductor cable of 22 KV grade as required.

17.8.1 a) 185 / 240 sq.mm. Each 2

DG SET

17.9 1 Providing, Installation, Testing and Commissioning Sets 4of 'Silent Type' Diesel Generating set alongwith having Prime Power Rating of 500 KVA, 415 volts at1500 RPM, 0.8 lagging power factor at 415 V suitablefor 50 Hz, 3 phase system & for 85% average Load Factor and consisting of the followings

a Diesel Engine

Diesel engine 4 stroke water cooled, electric start, ofsuitable BHP at 1500 RPM suitable for above outputof alternator at 40 Degree C, 50% RH and at 1000 meter MSL and conforming to BS 5514, BS 649 IS : 10000, capable of taking 10% over loading for onehour after 12 hours of continuous operation. The engine will be fitted complete with all the requiredaccessories

b Engine mounted Instrument Panel fitted with and having digital display for following

i) Start-stop switch with key ii) Water temperature indication

iii) Lubrication oil pressure indication iv) Lubrication oil temperature indication v) Battery charging indication vi) RPM indicationvii) Over speed indicationviii) Low lub. Oil trip indication ix) Engine Hours indication

c Alternator

Synchronous alternator rated at 500 KVA, 415 volts at1500 RPM, 3 phase 50 Hz, AC supply with 0.8 laggingpower factor at 40 Degree C, 50% RH and at 1000meter MSL. The alternator shall be having SPDP enclosure, brushless, continuous duty, self-excitedand self regulated through AVR conforming to IS : 4722/BS 2613 suitable for tropical conditions andwith class F/H insulation

d Base Frame & Foundation

Both the engine and alternator shall be mounted onsuitable base frame made of MS channel with necessary reinforcement which shall be installed onsuitable cement concrete foundation and vibrationisolation arrangement as per recommendations ofmanufacturer

e Fuel Tank

Daily service fuel tank of 625 litres capacity fabricatedout of 3mm thick M.S sheet complete with all standardaccessories and fuel piping between fuel tank and diesel engine with MS class 'C' pipes of suitable dia.complete with valves, level indication and accessoriesas required as per specifications

f Exhaust system

Dry exhaust mainfold with hospital exhaust silencer and catalytic convertor.

g Starting system

12V/24 V DC starting system comprising of startermotors: voltage regulator and arrangement for intialexcitation complete with suitable nos. of batteries(25 plates, 180 Amp. Hour capacity lead acid type)as required as per specifications

h Acoustic and weather proof enclosure with arrangement for fresh air intake for cooling of theengine and alternator, extraction, discharging hot airinto the atmosphere as per specifications

17.10 Fabricating, installing, testing and commissioning of Set 1synchronising, load sharing automatic mains failurecontrol including auto by-pass panel, suitable for4 x 500 KVA silent type DG sets complete with relays,timers, set of CTs for metering and protection and energy analyser to indicate currents, phase and linevoltages, frequency, power factor, KWH, KVARH &earth fault under frequency, control cabling fromAMF panel to diesel engine and elsewhere if requiredall complete and interlocking including the following :

a 4 nos. 1250 amp., and 1 no. 3200 amp motorisedelectrically operated draw out** with cradle type 3

position ACB with electronic** release for O/C & E/Fand shunt trip

b Auto/Manual/Test/Off selector switch

c 2 nos. over voltage relay, 2 nos. reverse power relayand 2 nos. under voltage relay

d 3 sets of current transformers 15 P 10 accuracy forprotection and 15 VA Class - I for metering

e Energy analyser unit to indicate current voltage frequency power factor and KWH

f Indicating lamps for load on mains and load on set

g Fuse for instruments

h Battery charger, complete with transformer/rectifier,D.C voltmeter and ammeter, selector switch for trickleoff and boost and current adjustment

i Main supply failure monitor

j Supply failure timer

k Restoration timer

l Control unit with three impulse automatic engine start/stop and failure to start lockout

m Impulse counter with locking and reset facility

n ON/OFF/Control circuit switch with indicator

o Audio/Video annunciation for i) High water temperature ii) Low lubricating oil pressure iii) Engine over speed iv) Engine fails to start v) Full load/maximum load warning

p Synchnoscope complete with accessories

q

The approval from necessary authorities/ Pollution control Board/ Electrical Inspector etc if required shall be liason and provided by contractor. The cost of DG set shall be inclusive of this rate and nothing extra shall be paid on this account.

17.11 Supplying and fixing exhaust gas piping of suitable dia Metres 30welded black MS, B Class pipe conforming to IS : 3589 cut to required lengths and installed withnecessary bends, supports and clamps, anti-vibrationmountings, insulation of exhaust system with mineralwool/rockwool, 50mm thick wire mesh and aluminiumcladding etc. as required as per specificaitonsHeight of the exhaust pipe system shall be made as per the relevant indian standard code of practice or CPCB norms or Local electricity Authority or Board. The cost of exhaust system shall be inclsive of the complete working of the exhaust system and nothin exta shall be paid on this account. system

17.12 PANELS & SWITCHGEARS

Supply, installation, testing and commissioningof fully compartmentalised cubicle type panelsas specified and complete with :

a) Tinned copper busbars b) 7 tank pre-treatmentc) Oven baked epoxy paint finishd) Internconnections, earthing etc.e) All MCCBs of 250A and above shall be microprocessor based & with rotary handlesFault level of MCCB :- 25KA for MCCB up to 100Amp rating & 35 KA for MCCB greater than 100Amp. rating

17.12.1 Sub Panel - 1 consisting of : Each 1

a) 1 no. 250A TPN MCCB as incomerb) 2 nos. 160A TPN MCCBsc) 3 nos. 100A TPN MCCBs

d) 1 set RYB indicating lamps, LED typee) 1 no. digital multimeter for incomer

17.12.2 625 KVAR Power factor correction panel with Each 1thyristor switching consisting of : a) 1250 TPN ACB as incomerb) 12 step controllerc) Total 625 KVAR gas filled capacitor in steps with thyristor switchinge) Metering, protection, indication auto /manual selection


a) 1 no. 400A TPN MCCB as incomerb) 1 no. 160A TPN MCCBc) 2 nos. 100A TPN MCCBsd) 8 nos. 63A TPN MCCBse) 1 set RYB indicating lamps, LED typef) 1 no. digital multimeter for incomer


a) 1 no. 800A TPN MCCB as incomerb) 2 nos. 400A TPN MCCBsc) 2 nos. 100A TPN MCCBsd) 1 set RYB indicating lamps, LED typee) 1 no. digital multimeter for incomer

17.12.5 MDB - GRD - 3 BALCONY 1/2 Each 3

a) 1no. 100A TPN MCCB as incomerb) 6 nos. 63A TPN MCBsc) 1 set RYB indicating lamps, LED typed) 1 no. digital multimeter for incomer

17.12.6 MDB - GRD - 1/2 Each 2 a) 1 no. 160A TPN MCCB as incomerb) 8 nos. 63A TPN MCBsc) 1 set RYB indicating lamps, LED typed) 1 no. digital multimeter for incomer

17.12.7 Utility Block Panel consisting of : Each 1

a) 1 no. 100A TPN MCCB as incomerb) 4 nos. 63A TPN MCBsc) 1 set RYB indicating lamps, LED typed) 1 no. digital multimeter for incomer

17.12.8 External Feeder Pillar consisting of : (Outdoor type) IP 65 Each 1

a) 63A TPN MCCB as incomerb) 2 nos. 32A TPN MCBsc) 3 nos. DP MCB d) 3 nos. 32A DP contactor with Timer weekly programmable digital timer, auto / manual selector switch etc.e) 1 set RYB indicating lamps, LEDf) 1 no. digital multimeterg) 18 nos. 10A /20A SP MCBs

17.12.9 SWITCHGEAR

Supply,installation,testing andcommissioning of switchgears in 16guage MS painted sheet steel enclosure completewith fixing accessories terminationearthing etc.

17.12.9.1 630A TPN isolator with 50 KVAR fixed capacitor and Each 317.12.9.2 400A TPN MCCB Each 117.12.9.3 250A TPN MCCB Each 1

17.12.9.4 125A TPN MCCB Each 217.12.9.5 63A 4P MCB Each 817.12.9.6 63A TPN MCCB with earth leakage relay Each 117.12.9.7 32A TP MCB Each 417.12.9.8 16A timer switches in existing DB in place of MCB Each 4

17.12.10TVSS of ASCO make or similar approved make , 351 series with short Each 1circuit current capacity of 65kA & surge

current capacities of 100 kA with necessary6 sq.mm copper flexible connections, fixing

accessories etc.

CABLES

17.13

Supply, Installation testing and commissioning following size of 1.1KV grade UG arm approved make cable laid in cable tray or on walls, ceiling etc. complete with clamp, saddels, cable tags etc. as per IS standard.

17.13.1 3 1/2 C - 300 AXFY sq mm Aluminium arm cable Metre 131017.13.2 3 1/2 C - 240 AXFY sq mm Aluminium arm cable Metre 54017.13.3 3 1/2 C - 185 AXFY sq mm Aluminium arm cable Metre 14517.13.4 3 1/2 C - 150 AXFY sq mm Aluminium arm cable Metre 14517.13.5 3 1/2 C - 120 AXFY sq mm Aluminium arm cable Metre 9017.13.6 3 1/2 C - 70 AXFY sq mm Aluminium arm cable Metre 21017.13.7 3 1/2 C - 35 AXFY sq mm Aluminium arm cable Metre 20017.13.8 4C - 25 AXFY sq mm Aluminium arm cable Metre 5517.13.9 4C - 16 AXWY sq mm Aluminium arm cable Metre 47017.13.10 4C - 10 XWY sq mm Copper arm cable Metre 25017.13.11 4C - 6 XWY sq mm Copper arm cable Metre 82017.13.12 3C - 6 XWY sq mm Copper arm cable Metre 27517.13.13 4C - 4 XWY sq mm Copper arm cable Metre 32017.13.14 3C - 4 XWY sq mm Copper arm cable Metre 62017.13.15 4C - 2.5 XWY sq mm Copper arm cable Metre 40017.13.16 3C - 2.5 XWY sq mm Copper arm cable Metre 165017.13.17 3C - 1.5 XWY sq mm Copper arm cable Metre 250

17.13.18 4C - 1.5 XWY sq mm Copper arm cable Metre 20017.13.19 1C - 240 sq.mm copper flexible cables Metre 37517.13.20 1C - 16 sq.mm copper flexible cables Metre 170

17.14 Supply, Installation testing and commissioning end termination with approved make brass compression gland and Copper lugs for for following size of PVC insulated and PVC sheathed/XLPE cu conductor cable of 1.1 KV grade as required.

17.14.1 1C - 240 sq.mm Each 6017.14.2 1C - 16 sq.mm Each 1017.14.3 4 x 10 sq.mm Set 217.14.4 4 x 6 sq mm copper arm cable Each 1817.14.5 3 x 6 sq mm copper arm cable Each 417.14.6 4 x 4 sq mm copper arm cable Each 1217.14.7 3x 4 sq mm copper arm cable Each 7017.14.8 4 x 2.5 sq mm copper arm cable Each 1017.14.9 3 x 2.5 sq mm copper arm cable Each 100

17.14.10 4x 1.5 sq mm copper arm cable Each 1017.14.11 3 x 1.5 sq mm copper arm cable Each 10

`17.15 HUME/PVC PIPE

Supply and laying of RC hume pipes and PVC pipes etc. for road crossing / cable entries to

buildings etc. complete with excavation and backfilling

17.15.1 300 mm dia hume pipe Metre 2017.15.2 160 mm dia HDPE pipe Metre 4017.15.3 100 mm dia PVC pipe Metre 30

17.16 CABLE TRAYS

Supply & installation of GI, perforated/ Ladder cable tray of 'PROFAB' or similar make with supports and accessories

17.16.1 16 guage, 150 wide , Perforated Metre 18017.16.2 16 guage, 300 wide,Perforated Metre 70

17.16.3 16 guage 450 wide, Ladder type, 50 mm high Metre 4017.16.4 16 guage, 600 wide, Ladder type, 50 mm high Metre 4017.16.5 14 guage 900 mm ladder type tray, 50 mm high Metre 30

17.17 LIGHT FITTINGS & FANS

Supply,installation,testing and commissioningof light fittings and fans complete with :

(with similar to OR equivalent APPROVED make) a) Fixture with lamp & control gear accessoriesb) Termination & earthing

c) Fixing/mounting accessories d) Down rods and mounting frames

for ceiling/exhaust fans e) All fluorescent/CFL lamps with less than 5.5 W loss ballasts & T5 with electronic ballastsf) Dimmable DSI ballasts wherever specified

17.17.1 1 x 28W, T5 lamp fitting, surface mounted with Each 105reeded acrylic cover similar to Osram/Havells

17.17.2 2x10/13/18W, CFL lamp recess DL + frosted glass Each 180cover/lense similar to Pierlite/Havells/Wipro

17.17.3 Emergency directional / Exit/Signage light similar Each 14 to Prolite PEL LED

17.17.4 2 x 26W, CFL lamp recessed downlight with cover/ Each 10lense similar to Pierlite/Havells/Wipro

17.17.5 2 x 28W T5 lamp recessed mirror optics light fitting Each 30with clear acrylic cover similar to TULIP TFR 1417

17.17.6 10W CFL bulk head fitting with toughened plastic Each 50body for lift shafts and catwalk above Auditorium cover/lense similar to Pierlite/Havells/Wipro

17.17.7 305mm dia exhaust fan Each 7

17.17.8 1200 mm sweep ceiling fans without regulator, 3 leaf, Each 5 colour as decided by site engineer

17.17.9 450mm sweep wall bracket fan with ON/OFF control Each 1and other accessories

17.17.10 6 x 1W, recessed LED spot light similar to RAELED6 Each 83OSRAM/AUTORAMA

17.17.11 1 x 26W, CFL recessed wall washer similar to Each 5PIERLITE DOT 4060

17.17.12 2 x 1 x 54W, T5 40mm wide, 2348mm long recessed Each 16light with opal acrylic cover, similar to XAL FRAME 70

17.17.13 2M, long, 230V, single circuit track similar to FLOS Set 2SURFACE TRACK complete with installationchannel, end caps and 3 nos. PURE 3 QR111 TRACKSPOT

17.17.14 1 x 35W UP/DOWN M/H wall mounted down light Each 10SIMES S.3942/RAAT KOREA

17.17.15 150W, metal halide medium beam (25 deg.) downlight Each 8similar to FLOS COMPASS 3525

17.17.16 35W, metal halide floor buried asymetrical uplight Each 5similar to FLOS NEUTRON 07.9252 for Zen Garden

17.17.17 2 x 26W, CFL lamp recessed fitting with dropped glass Each 2similar to PIERLITE DOT 4050 for VIP room

17.17.18 1 x 3W LEDS wall recessed step light similar to Each 70TULIP SLIMLED3W 3000K 350 mA

17.17.19 1 m long LED Nosing strip with row/seat numbers, Each 150floor embedded with drives, similar to PROLITE

17.17.20 Emergency LED auditorium RED exit light with built-in Each 201 hr. battery back-up similar to PROLITE

17.17.21 Suspended dome light fitting 1 x 42W, CFL, Each 4BEGA 6704 IP55

17.17.22 1 x 28W, T5 fluorescent strip fitting for coves Each 240

17.17.23 1 x 14W, T5 fluorescent strip fitting for coves Each 20

17.17.24 1 x 28W, T5 DSI/ANALOG dimmable ballast for Each 650Auditorium wall lighting similar to OSRAM/ATCO

17.17.25 Dimmable LED flexible strip, MIN 8W/meter similar to Meter 525KKFX351/OSRAM LINEAR LIGHT FLEX 3000Kfor Auditorium leaf edge lighting

17.17.26 Drive suitable for above LED strip light 500 mA similar Each 125to OSRAM

17.17.27 2 x 26W, CFL recessed dimmable down light for Each 15Auditorium below balcony, similar to PIERLITE DOT2200

17.17.28 Dimmable switched circuit dimmer with protective Each 1MCB/circuit similar to LUTRON GRAFIC EYE 4500for Auditorium complete with control unit, IR remote,other accessories as required

17.17.29 250W QT32 double focus down light for Auditorium Each 18petal tips similar to CONCORD 2032131

17.17.30 250W QT32 down light for Auditorium perforated light Each 9box similar to CONCORD 2038651

17.17.31 400W, halogen asymmetrical uplighter for Auditorium Each 5ceiling petal similar to CONCORD 4065881

17.17.32 RGB LED strip with controller for Auditorium petal Meter 120(stage side) similar to OSRAM COLORMIX + RGB controller

17.17.33 2 x 28W, T5 lamp fitting, surface mounted with Each 42reeded acrylic cover similar to Osram/Havells

17.18 LIGHTNING PROTECTION

17.18.1 Early Emission Lightning arrestor similar to Set 1ERICO/ Indelec model SG .6 protection system complete 4.0 m poles, clamps,collar, serial lightning,flash counter and otheraccessories etc.(unit rate of conductorto be indicated)

18.18.2 Maintenance free earthing using 80 mm dia galvanised Each 13000 mm long pipe complete with compound,moisture based similar to GALAXY model no. G-803

17.19 WIRING

17.19.1 COPPER WIRING IN PVC CONDUIT

Point wiring in PVC smoke free temperature stable,heavy guage conduit with accessoriesWiring for light point/fan point/6A socket point/call bell point with 3 x 1.5 sq.mm FR PVC insulatedcopper conductor single core cable in surface/recessed PVC SFT conduit, as required looping fromlight switch/other light points (excluding circuit wiringfrom DB/ switchboard to first light/fan/socket points)

17.19.1.1 Light points & Fan point Point 170017.19.1.2 Light points 6A Socket Point from 6A socket Point Point 150

17.19.2 Power plug wiring in PVC SFT conduit (3 x 2.5 sq.mm)

Wiring for power plug with 3 x 2.5 sq.mm FR Point 190PVC insulated copper conductor in surface/recessed PVC SFT conduit looping from DB ( single Phase from DB's for 15Amp. Or 20Amp. Single Phase)

17.19.3 Power plug wiring in PVC conduit (5 x 4 sq.mm)

Wiring for light/power plug with 5 x 4 sq.mm FR Point 6PVC insulated copper conductor in surface/recessed PVC SFT conduit looping from DB ( 3 Phase from DB's )

17.19.4 Circuit/sub-main wiring in PVC SFT conduits

Wiring for circuit/submain wiring alongwith earthwire with the following sizes of PVC insulatedcopper conductor, single core cable in surface/recessed PVC conduit as required

17.19.4.1 3 x 1.5 sq.mm copper insulated FR PVC wires in Point 1600PVC SFT conduits from LDB to Switchboard / 6A socket with accessories

17.19.4.2 3 x 1.5 sq.mm copper insulated FR PVC wires in Point 4000PVC SFT conduits from Switchboard to first light Point/ fan Point with accessories

NOTE:- The rate of the items at S. No. 5.1 to 5.2 are inclusive of PVC SFT conduits, Pulling of wire in the coduits & Accesoroes etc.

17.20 MISCELLANEOUS

17.20.1 Supply and laying of following conduits with Metre

accessories

17.20.1.1 a) 20 dia PVC, SFT 150

17.20.1.2 b) 25 dia PVC, SFT 250

17.20.1.3 c) 32 dia PVC, SFT 100

17.20.2 INVERTER and UPS

17.20.2.1 20 kVA, 3 phase input, 3 phase output, emergency Each 1power supply inverter with 30 min. SMF batteryback-up.

17.20.2.2 30 KVA, 3 phase input/output online IGBT based UPS Each 1with 30 min. SMF battery back-up.

17.21 EXTERNAL LIGHTING

17.21.1 Supply, installation, testing and commissioning of

external light fittings complete with :

a) Lamps, control gear, internal wiring etc.

b) Earthing

c) Foundation & fixing accessories

17.21.1.1 6.0m high (above ground) MS tapered pole with 2A SP Each 18

MCB in powder coated graphite colour proof HENSEL

box external mounted or MCB mounted within the pole,

street light similar to BEGA-9118 simple configuration

with HIT-CE/S 150W lamp, 2m long GI coiled earthing,

cable entry pipes welded, other fixing/mounting

accessories as required (locally fabricated)

17.21.1.2 6.0m high (above ground) MS powder coated graphite Each 3

colour, tapered pole with 2A SP MCB in weather proof

HENSEL box external mounted or MCB mounted

internally within the pole, street light similar to BEGA-

9160, double configuration with HIT-CE/S 150W lamp,

2m long GI coiled earthing, cable entry pipes welded,

other fixing/mounting accessories etc. (locally fabricated)

17.21.1.3 35W, HIT-TC-CE lamp drive over in ground IP67 light Each 12fitting similar to BEGA 8858 with convex optical cylindrical lens, water stopper, cable etc.

17.21.1.4 Surface mounted on ground flood light with 4 step Each 6adjustable asymmetrical light distribution, alu. alloybody, safety glass, mounting plate/anchorage unit similar to BEGA 7796 with HIT-TC-CE 70W, lampand accessories

17.21.1.5 Wall recessed step light with shielded light source Each 8aluminium alloy body, crystal glass similar to BEGA 2127 with HIT-TC-CE 35W lamp andaccessories

17.21.1.6 180 deg. light distribution on ground, 230mm high Each 12floor washer bollar light, aluminium alloy body, crystalglass, IP67, similar to BEGA 8773 with HIT-CE-35Wlamp, accessories etc.

17.21.1.7 Outdoor LED strip light, 3000K colour, flexible with Metre 100connectors and external power supply unit, fixing accessories etc. similar to OSRAM/KKDC

17.21.1.8 1 x 18W, CFL recessed wall light similar to Each 2TULIP TPW 1155

17.21.1.9 6W, LED recessed circular downlight Each 30

17.21.1.10 150W, metal halide steet light similar to HAVELLS Each 20ELLISSE on 6.0m height (above ground) stepped painted MS pole with foundation, fixing accessories etc.

Sub Head - IV : Safety Equipment

17.22 Providing and fixing carbon dioxide (CO2) type fire Each 6extinguisher confirming to IS 2878 - 1976 and cylindersfully charged of following capacity

a) 4.5 KG

17.23 Supply and fixing of foam fire extinguishers, portable type Each 109 lit capacity hanged on wall with bracket complete asrequired

17.24 Supply and fixing safety instruction chart in word duly Each 3framed with 5mm thick glass as required (approx. frontarea 1.20 sq.mt.)

17.25 Providing of set of 4 nos, 9.5 Litre capacity GI bucket Set 2painted in post office red colour with prior coat of redoxide paint and written with white pain 'FIRE' and mounted on MS angle iron frame with bracket of appropriate size and capacity including filling sand etc.

17.26 Providing First Aid Box as approved by St. John Each 2Ambulance Brigade/Indian Red Cross conforming to IS 2217-1963

17.27 Supply & fixing shock treatment chart duly mounted on Each 3a wooden frame with 5mm thick glass as required (approx. front area 1.20 sq.mt.)

17.28 Providing of rubber mat 1 mtr. wide and 12mm thick to Metre 5withstand 15 KV dielectric strength as per IS 5424-1969

17.29 Providing of rubber mat 1 mtr. wide and 6mm thick to Metre 12with stand 3.3 KV dielectric strength as per IS 5424-1969

17.30

Preparing and obtaining the approval from CEIG/ Statutory clearances for the complete electrical installation ( HT power supply arrangements, Transformers, DG sets, Buildings electrical works etc.) and duly submitting the drawing for approval including necessary inspection fees for inspection and obtaining Safety certificate for entire new installation.

LS 1

Total of NDSR ITEMS

SECTION E

(B) Passenger Lift Unit Qty Amountin figure in words

1

Supply , Installation, Testing and commissioning of20Passenger Elevator 1.00 m/s Monospace, 2 stops, 2landings,(G+1), travel 8 mtrs., SS COPD in car & at alllandings

Speed : 1.00 Meter per Second.VVVFDriveMachine Unit : (Gearless machine unit).Machine room LessTotal Travel : 8” meters approx.Car Size : 1700 mm Wide X 1800 mm Deep X 2200 mm High

Car Enclosure : Stainless Steel Panels in Hairline FinishFlooring : PVC, 2 mm thickCar Entrance : Stainless Steel Center Opening Power Operated Door in Hairline Finish.Landing Entrance : Stainless Steel Center Opening Power Operated Door in Hairline Finish.Entrance Opening : 1100 mm Wide X 2000 mm High.Control Microprocessor based Simplex Full Collective Control DigitalOther Special Features 1. Attendant Operation.2. Emergency Stop button in Car.3. Press and Speak Type Intercom in Car.4. Car Emergency Light and Alarm Bell.5. Door Open / Door close button in Car.6. Overload Warning device with full load bypass.7. Full height Infra-red Light curtain safety screen for automatic doors.8. False Car Calls Cancelling9. Intercom – Press and speak type.10. Fireman’s drive.11. ARD Each 1

TOTAL

Pondicherry UniversityConvention Center (subhead No‐18)

Rate

Tender CP TC PQ PU Pondi Audotorium BOQ

Documents

Transcript of Tender CP TC PQ PU Pondi Audotorium BOQ