Tems Cel File Format
2
TEMS CEL File FORMAT TEMS CEL-file field XEUS Table field Required Cell CellId & SiteId Mandatory and has to be unique for each record Lat or Latitude Latitude Mandatory. Must be in decimal format e.g. 13.23232 or -12.2323 Lon or Longitude Longitude Mandatory. Must be in decimal format e.g 123.23232 or - 121.232432 MCC MCC MNC MNC LAC LAC Mandatory for GSM cell RA Rac CI CI Mandatory for GSM cell CI_N_n This field will be used to get the neighbor relation ANT_DIRECTION or ANT DIR or ANT ORIENTATION AntDir Mandatory ANT_BEAM_WIDTH AntBW ANT_TYPE AntType ANT_HEIGHT AntHeight ANT_TILT AntTilt CELL_TYPE CellType UARFCN ARFCN SC SC RNC-ID RncId Mandatory for WCDMA cell RNC-ID_N_n Not Available Not supported. For neighbor relation use CI_N_n only C-ID CId Mandatory for WCDMA cell C-ID_N_n Not Available Not supported. For neighbor relation use CI_N_n only LAC_N_n Not Available Not suported. For neighbor relation use CI_N_n only URA Info3
-
Upload
van-quang-dung -
Category
Documents
-
view
212 -
download
5
Transcript of Tems Cel File Format
TEMS CEL File FORMAT TEMS CEL-file field XEUS Table field RequiredCell CellId & SiteId Mandatory and has to be
unique for each recordLat or Latitude Latitude Mandatory. Must be in
decimal format e.g. 13.23232 or -12.2323
Lon or Longitude Longitude Mandatory. Must be in decimal format e.g 123.23232 or -121.232432
MCC MCC MNC MNC LAC LAC Mandatory for GSM cellRA Rac CI CI Mandatory for GSM cellCI_N_n This field will be used to get
the neighbor relation
ANT_DIRECTION or ANT DIR or ANT ORIENTATION
AntDir Mandatory
ANT_BEAM_WIDTH AntBW ANT_TYPE AntType ANT_HEIGHT AntHeight ANT_TILT AntTilt CELL_TYPE CellType UARFCN ARFCN SC SC RNC-ID RncId Mandatory for WCDMA cellRNC-ID_N_n Not Available Not supported. For neighbor
relation use CI_N_n onlyC-ID CId Mandatory for WCDMA cellC-ID_N_n Not Available Not supported. For neighbor
relation use CI_N_n onlyLAC_N_n Not Available Not suported. For neighbor
relation use CI_N_n onlyURA Info3 TIME_OFFSET Info1 CPICH_POWER CpichPower MAX_TX_POWER Info2 NODE_B SiteId NODE_B_STATUS CellStatus ARFCN ARFCN BSIC BSIC TCH_ARFCN_n Not Available Not supported Neighbor information is retrieved using CI_N_n field only. Data from LAC_N_n, RNC-ID_N_n andC-ID_N_n is not used. It is important to have unique CI field to avoid wrong neighbor definition. Implementation Note
User can import more than one TEMS Cel-file The TEMS Cel-file should have a valid file header Each TEMS Cel-file can contain combination of WCDMA and GSM Cell Any cell data found to have same CellId in the project database and importing TEMS Cell file
will be removed prior to import. User has an option to remove all Site configuration data prior to import. This includes both
GSM and WCDMA data. If user chooses to import carrier and neighbor data also, selecting this option will also remove alll carrier and neighbor data from the project database prior to import.
All the mandatory parameters should present Parsing Error Type
Empty file File that has invalid file header File that does not has one of the mandatory parameters Ambiguous records (record that is non-identifiable in terms of Technology Band) Duplicate CellId in the imported TEMS CEL file Duplicate CellId with existing data
Cell that has empty or 0 value in Longitude or Latitude
