TEMPERATURE HUMIDITY DATA LOGGER -...
Transcript of TEMPERATURE HUMIDITY DATA LOGGER -...
TEMPERATURE HUMIDITY DATA LOGGER QUICK GUIDE – IOS PLATFORM
WRITTEN BY MOBILE TEAM
VERSION 1.0.3 - ENGLISH
03/2016
VERSION 1.0.3 - ENGLISH Confidential
03/2016 TEMPERATURE HUMIDITY DATA LOGGER 1
Thank you for choosing our products. Before operating your new Temperature Humidity Data Logger (THDL), we recommend reading this user manual in its entirety to ensure safe and proper use.
After unpacking the THDL, check to ensure that there is no damage before setting up. If there is any damage, please contact technical support via the form on http://rynantech.com/contact/ or through live chat.
Please retain this user manual for future reference.
Notice
© 2015 RYNAN Technologies Pte Ltd. All rights reserved
The contents of this user manual and the specifications of the products are subject to change without notice. RYNAN TECHNOLOGIES reserves the right to make changes without notice in the specifications and materials contained herein and shall not be responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical and other errors relating to the publication.
Document Version – 1.0.3 - ENGLISH.
About Us
At RYNAN Technologies, we develop innovative products that allow our customers to operate more efficiently and sustainably. We are devoted to creating the most effective and environmentally friendly solutions for the industries we serve, including coding and marking, printing, packaging, and medical.
Headquartered in Singapore, RYNAN Technologies understands the needs of customers in the fast growing, dynamic markets in Asia and around the globe. RYNAN is invested in the research and development of leading edge technology to continually build on our diverse portfolio of products, which currently includes thermal inkjet and Piezo inkjet variable data printers, ink solutions, and offset CTP plates…
VERSION 1.0.3 - ENGLISH Confidential
03/2016 TEMPERATURE HUMIDITY DATA LOGGER 2
I TABLE OF CONTENTS
II THDL MOBILE APPLICATION - IOS ................................................................................ 3
II.1 INTRODUCTION ............................................................................................................. 3
II.2 MAIN USER INTERFACE .................................................................................................. 3
II.2.1 TAP TO CONNECT THDL DEVICE ............................................................................... 3
II.2.2 CONNECT THDL DEVICE AND READING FUNCTION .................................................. 4
II.2.2.1 SETTING FUNCTION ............................................................................................ 5
II.2.2.2 FILTER FUNCTION ............................................................................................. 11
II.2.2.3 NOTIFICATION FUNCTION ................................................................................. 21
II.2.3 READING NO FILTER (SHOW CHART) ..................................................................... 24
II.2.3.1 TEMPERATURE CHART ...................................................................................... 25
II.2.3.2 HUMIDITY CHART ............................................................................................. 26
II.2.3.3 SHOW CHART ALL ............................................................................................. 27
III ADDITIONAL INFORMATION ......................................................................................... 28
III.1 CONTACT US ................................................................................................................ 28
VERSION 1.0.3 - ENGLISH Confidential
03/2016 TEMPERATURE HUMIDITY DATA LOGGER 3
II THDL MOBILE APPLICATION - IOS
I I .1 INTRODUCTION
THDL Mobile Application is a mobile application which is using for reading the data of THDL.
Please download the Mobile Application from http://rynantech.com/contact/
Let’s start it.
I I .2 MAIN USER INTERFACE
When user start the application. The Scanning THDL Interface (Figure 1) is the first user interface. In Main User Interface, user can see all THDL device in the area of a circle with radius 10 meters.
II.2.1 TAP TO CONNECT THDL DEVICE
STEP 1:
In the main interface which will automatically load onto the list of THDL that IOS device scanned.
In addition, the upper right corner of the interface is the scan button, it's possible for user to manipulate manually by starting or stopping the scan.
STEP 2:
User can select any THDL by tapping any row in the list which IOS devices are scanned
And then have to wait for connecting to the THDL device.
Figure 1: Scan THDL devices UI
VERSION 1.0.3 - ENGLISH Confidential
03/2016 TEMPERATURE HUMIDITY DATA LOGGER 4
II.2.2 CONNECT THDL DEVICE AND READING FUNCTION
When the application is connected with the THDL device, user can see the interface like Figure 2.
The user interface will be showed detail of the THDL device as name, address, version, date begin, date end, status, … and in this version Temperature Humidity Data Logger have humidity information, temperature and humidity limit information.
Setting Function ( ): including of set date & time, set sampling frequency, start or stop device, get date, clear device memory, set temperature limit and set humidity limit.
Filter Function ( ): including data filtering for temperature and humidity from the connected THDL device.
Notification Function ( ): The application will display a dialog box notification when a sample temperature or humidity are outside the permitted limit.
Figure 2: THDL device are connected and details of THDL UI
VERSION 1.0.3 - ENGLISH Confidential
03/2016 TEMPERATURE HUMIDITY DATA LOGGER 5
II.2.2.1 SETTING FUNCTION ( )
When the application is connected to the THDL device, user simply tap to Setting button ( ) on the navigation bar to open Setting Menu Interface like Figure 3.
The connected THDL device setting interface have 8 available setting for THDL device which will be set by user.
Figure 3: Connected THDL device setting UI
VERSION 1.0.3 - ENGLISH Confidential
03/2016 TEMPERATURE HUMIDITY DATA LOGGER 6
II.2.2.1.1 INTRODUCE 8 FUNCTIONS USED IN THE THDL DEVICE SETTINGS UI
SETTING DESCRIPTION USER INTERFACE
Clear Memory Delete data in memory.
Set Date & Time Set current date & time to THDL.
VERSION 1.0.3 - ENGLISH Confidential
03/2016 TEMPERATURE HUMIDITY DATA LOGGER 7
SETTING DESCRIPTION USER INTERFACE
Set Sampling Frequency Set date & time to take a temperature sample.
Get Date & Time Get current date & time from THDL.
VERSION 1.0.3 - ENGLISH Confidential
03/2016 TEMPERATURE HUMIDITY DATA LOGGER 8
SETTING DESCRIPTION USER INTERFACE
Temperature Limit
Setting temperature limit which exceeds a certain level, user’s mobile will be alarmed.
Humidity Limit
Setting humidity limit which exceeds a certain level, user’s mobile will be alarmed.
VERSION 1.0.3 - ENGLISH Confidential
03/2016 TEMPERATURE HUMIDITY DATA LOGGER 9
SETTING DESCRIPTION USER INTERFACE
Control MCU Control MCU to “Run” or “Stop”
Rename Set a new name for THDL device
VERSION 1.0.3 - ENGLISH Confidential
03/2016 TEMPERATURE HUMIDITY DATA LOGGER 10
II.2.2.1.2 USER INFORMATION:
Tap button to open “User Information Interface” like Figure 4.
User have 255 characters to enter user information(45 characters for the user name and 210 characters for the information).
Figure 4: User Information UI
VERSION 1.0.3 - ENGLISH Confidential
03/2016 TEMPERATURE HUMIDITY DATA LOGGER 11
II.2.2.2 FILTER FUNCTION ( )
Tap back to the interface like Figure 2 and tap to filter button ( ). In the version THDL, user have two choices for filtering like Figure 5
User choose one of two to open the main filter interface.
Figure 5: Filter Menu UI
VERSION 1.0.3 - ENGLISH Confidential
03/2016 TEMPERATURE HUMIDITY DATA LOGGER 12
II.2.2.2.1 FILTER TEMPERATURE DATA
Choose Temperature icon ( ) from Filter Menu UI to open Filter Temperature Data Interface. A Data Loading Dialog box will appear like Figure 6
After loading success, all data includes the date and time, the temperature and humidity will be showed like Figure 7
Figure 7: Loading Successful
Figure 6: Loading Data For Filter UI
VERSION 1.0.3 - ENGLISH Confidential
03/2016 TEMPERATURE HUMIDITY DATA LOGGER 13
There are 3 options in the filter.
a. Filter By Date:
Tap to the checkbox of Date, a Filter By Date Dialog appear like Figure 8.
User can filter temperature data in terms of time between the Date Begin and Date End. For example: in the Figure 8 we chose Date Begin is Nov 19, 2015 and Date End is Nov 25, 2015. Next tap to the Filter button, we are going to have a result like Figure 9.
Figure 9: Filter By Date Result
Figure 8: Filter By Date Dialog.
VERSION 1.0.3 - ENGLISH Confidential
03/2016 TEMPERATURE HUMIDITY DATA LOGGER 14
b. Filter By Temperature: Another option for the Filter is Filter By
Temperature. Tap to the checkbox of Temperature, a Filter By Temperature appear like Figure 10. User will choose the temperature lower and the temperature higher to set for filtering data
After making sure that you will filter the data according to the selected temperature. Tap to Filter button, we are going to have a result like Figure 11.
Figure 10: Filter By Temperature Dialog.
Figure 11: Filter By Temperature Result
VERSION 1.0.3 - ENGLISH Confidential
03/2016 TEMPERATURE HUMIDITY DATA LOGGER 15
c. Filter By Date & Temperature: The third option for the filter is Filter By Date and Temperaute. Similar to two
options above. User can set the Filter Data by Date and Filter Data by Temperature sequentially and we are going to have a result like Figure 12.
Figure 12: Filter By Date & Temperature Result
VERSION 1.0.3 - ENGLISH Confidential
03/2016 TEMPERATURE HUMIDITY DATA LOGGER 16
If user want to export the filter temperature list to email, user just tap to (Share button) and then a composer mail appear which user can enter mail address for send to (Figure 13).
Figure 13: Share UI.
VERSION 1.0.3 - ENGLISH Confidential
03/2016 TEMPERATURE HUMIDITY DATA LOGGER 17
II.2.2.2.2 FILTER HUMIDITY DATA
Choose Humidity icon ( ) from Filter Menu UI to open Filter Humidity Data Interface. A Data Loading Dialog box will appear like Figure 14
After loading success, all data includes the date and time, the humidity and temperature will be showed like Figure 15
Figure 14: Loading Data For Filter UI.
Figure 15: Loading Successful.
VERSION 1.0.3 - ENGLISH Confidential
03/2016 TEMPERATURE HUMIDITY DATA LOGGER 18
There are 3 options in the filter
a. Filter By Date:
Tap to the checkbox of Date, a Filter By Date Dialog appear like Figure 16.
User can filter humidity data in terms of time between the Date Begin and Date End. Tap to the Filter button, we are going to have a result like Figure 17.
Figure 16: Filter By Date Dialog.
Figure 17: Filter By Date Result.
VERSION 1.0.3 - ENGLISH Confidential
03/2016 TEMPERATURE HUMIDITY DATA LOGGER 19
b. Filter By Humidity: Another option for the Filter is Filter By
Humidity. Tap to the checkbox of Humidity, a Filter By Humidity appear like Figure 18.
User will choose the humidity lower and the humidity higher to set for filtering data. Next tap to the Filter button, we are going to have a result like Figure 19.
Figure 18: Filter By Humidity Dialog.
Figure 19: Filter By Humidity Result.
VERSION 1.0.3 - ENGLISH Confidential
03/2016 TEMPERATURE HUMIDITY DATA LOGGER 20
c. Filter By Date & Humidity: Similar to two options above. User can set the Filter Data by Date and Filter
Data by Humidity sequentially and we are going to have a result like Figure 20.
If user want to export the filter humidity list via email, user just tap to (Share button) and then a composer mail appear which user can enter mail address for send to like Figure 13.
Figure 20: Filter By Date & Humidity Result.
VERSION 1.0.3 - ENGLISH Confidential
03/2016 TEMPERATURE HUMIDITY DATA LOGGER 21
II.2.2.3 NOTIFICATION FUNCTION
Notification function is a new feature in version THDL, sign will only appear when the THDL device has sample temperature or humidity is outside the limit specified earlier. And a dialog box will appear at the same time like Figure 21
If user would like to see more details information temperature or humidity limit that just tap one of two in the list of notification dialog.
Figure 21: Notification Dialog UI
VERSION 1.0.3 - ENGLISH Confidential
03/2016 TEMPERATURE HUMIDITY DATA LOGGER 22
II.2.2.3.1 TEMPERATURE LIMIT DATA LIST
When the THDL device has sample temperature is outside the permitted limit. User simply touch the notification temperature limit message on the dialog to see more the details
The loading Interface will invoke like Figure 22.
After loading success, a list of all the information of the temperature data falls outside the permitted limit will be displayed Figure 23.
Figure 22: Loading Temperature Limit Data UI
Figure 23: Temperature Limit Data List UI
VERSION 1.0.3 - ENGLISH Confidential
03/2016 TEMPERATURE HUMIDITY DATA LOGGER 23
II.2.2.3.2 HUMIDITY LIMIT DATA LIST
As well as Temperature Limit Data List, user simply touch the notification humidity limit message on the dialog to see more the details
The loading Interface will invoke like Figure 22.
After loading success, a list of all the information of the temperature data falls outside the permitted limit will be displayed Figure 24.
Figure 24: Humidity Limit Data List UI
VERSION 1.0.3 - ENGLISH Confidential
03/2016 TEMPERATURE HUMIDITY DATA LOGGER 24
II.2.3 READING NO FILTER (SHOW CHART)
If user want to read all data from the THDL device, user just tap in row of THDL Device Detail Interface at Figure 2 to starting
There are 3 types of graphs to performing this function. There are Temperature Chart, Humidity Chart and Show All (Figure 25).
Figure 25: Charts Menu UI
VERSION 1.0.3 - ENGLISH Confidential
03/2016 TEMPERATURE HUMIDITY DATA LOGGER 25
II.2.3.1 TEMPERATURE CHART
From the Charts Menu (Figure 25), user choose temperature chart by tap on “Temperature Chart” button and user have to wait for loading data from the THDL device. This process speed is depended on the number of data like Figure 26.
When loading finished, the temperature data will be showed to chart like Figure 27.
If user want to report the temperature chart via email, user choose (Share button). Then user will see the interface like Figure 13 and user can enter mail address for send to.
Click “Save” button if user would like to save Chart as image.
Figure 26: Loading Data UI from THDL Device
Figure 27: Temperature Chart UI
VERSION 1.0.3 - ENGLISH Confidential
03/2016 TEMPERATURE HUMIDITY DATA LOGGER 26
II.2.3.2 HUMIDITY CHART
Also from the Charts Menu(Figure 25), user choose humidity chart by tap on “Humidity Chart” button and user have to wait for loading data from the THDL device. This process speed is depended on the number of data like Figure 26.
When loading finished, the humidity data will be showed to chart like Figure 28.
If user want to export the humidity chart via email, user choose (Share button). Then user will see the interface like Figure 13 and user can enter mail address for send to.
Click “Save” button if user would like to save Chart as image.
Figure 28: Humidity Chart UI
VERSION 1.0.3 - ENGLISH Confidential
03/2016 TEMPERATURE HUMIDITY DATA LOGGER 27
II.2.3.3 SHOW CHART ALL
The manipulation like Temperature Chart and Humidity Chart, from the Charts Menu(Figure 25), user just tap on “Show All” button and user have to wait for loading data from the THDL device. This process speed is depended on the number of data like Figure 26
When loading finished, the data of temperature and humidity will be showed to chart like Figure 29
If user want to export the show all chart via email, user choose (Share button). Then user will see the interface like Figure 13 and user can enter mail address for send to.
Click “Save” button if user would like to save Chart as image.
Figure 29: Show All Chart UI
VERSION 1.0.3 - ENGLISH Confidential
03/2016 TEMPERATURE HUMIDITY DATA LOGGER 28
III ADDITIONAL INFORMATION
I I I .1 CONTACT US
Contact us at the below addresses if you have any questions or concerns:
RYNAN TECHNOLOGIES – VIETNAM JSC
LONGTRI HAMLET,
LONGDUC COMMUNE, TRAVINH CITY
TRAVINH PROVINCE, VIETNAM
Tel: +84 743 746 991
Fax: +84 743 746 992
Website: www.rynantech.com
E-mail: [email protected]