TemPeraTure & elecTronIc conTrol soluTIons
Transcript of TemPeraTure & elecTronIc conTrol soluTIons
TemPeraTure & elecTronIc conTrol soluTIons Laser Diode Drivers & High Precision Temperature Controllers
oPTIcal TecHnoloGIes
Single diode laser driver Multi-diode, single channel Stack controller Multi-Channel laser diode controller DPSS controller Quantum cascade laser (QCL) driver HCT High Current Diode and TEC controller Temperature controller
Optical Technologies Power Technologies Thermal Management
Optical, Power and Thermal Management Technologies represent
the biggest technological challenges facing any engineer.
Our three key competencies Optical, Power and Thermal
Management have no logical bits and bytes, nor industry
qualifi cation standards. Hence the design of a system and the
choice of the right technology, supplier and products can only be
based on knowledge and experience in those fi elds.
There are manifold fi elds of applications in our key markets
Medical
Industrial
Renewable Energies
Research & Scientifi c
Defence & Aerospace
where we serve
AMS Technologies has built a comprehensive knowledge base in
those three key competencies, enabling us to provide customers
with complete solutions. Over and above the mere product support
for standard products, our solutions can include:
The development together with the customer of specifi cation
sheets for customized components, subsystems, modules and
systems, all based on customer needs
Effective project management of any customized product
development
Higher level design services for system-level prototypes
Interdisciplinary system-level integrated design comprising all
three key competencies:
Optical, Power and Thermal Management Technologies
Appropriate subcontractor selection and production support
for system-level integration
Proper vetting of technologies and suppliers
Simulations and modeling of system-level designs
Installation, training and servicing of equipment and
instrumentation
ams Technologies’ solution approach has helped hundreds of customer projects to move from concept to production. Helping you to understand our capabilities, we invite you to browse a list of the many projects that we have successfully completed over a timeframe closely approaching 30 years.
our soluTIon aPProacH
oem customers with Consulting Designing Prototyping Validating/Testing Turnkeying
endusers B2B with Demonstrating Installing Training Servicing Repairing
AMS Technologies is Europe’s leading solution provider and distributor
for Optical, Power and Thermal Management Technologies
AMS Technologies is a leading solution provider and distributor of high-
tech, leading-edge components, systems and equipment, with more
than 30 years of experience to date and currently serving more than
2000 European customers.
We are the specialists in both componentry and complete solutions for
Optical technology, Thermal Management and Power Technology fi elds,
with access to and long standing relationships with the most advanced
manufacturers in each of those fi elds. Drawing extensively on our
experience in each of these differing technologies, and coupling this
with our broad system-level competence, we are able to offer seamless
and comprehensive solutions incorporating complementary aspects
from all three key technology fi elds.
With an appropriate technical education, an element of entrepreneurial
spirit and many years of design and consultancy expertise, our sales
engineers can rapidly comprehend system requirements and provide
you the customer with a solution that goes way beyond a simple
understanding of our product datasheets. We take active involvement
in the design cycle, defi ning and re-defi ning your specifi cations, and
leading in many cases to highly specifi c, customized products and
solutions. Helping you to effectively outsource your production line,
we can even provide you with the necessary leading turnkey contract
manufacturing services in our key competency fi elds.
AMS Technologies has been delivering solutions into a variety of
high-tech markets, including renewable energies, medical, defence &
aerospace, research & scientifi c and various other industrial segments.
Our customer base consists of Europe’s largest leading technology
corporations, a network of universities and research institutes as well
as the most promising start-ups.
We thrive by working in a ‘customer fi rst’ environment. Our pan-
European customers are serviced from a network of local offi ces in
Germany, the UK, France, Italy, Spain, Poland and Sweden, with a
focused operations and logistics centre located in Munich, Germany.
Our commitment: Identifying the best solution for your project enabling
you to become your customers’ fi rst choice!
your ams Technologies team
For more than 30 years, we at ams Technologies have been supporting the european market with leading, innovativetechnologies and products that have allowed our customers to take prime position in their chosen markets.
WHere TecHnoloGIes meeT soluTIons
single diode laser driver
Designed to supply one single diode laser
multi-diode, single channel
Designed for applications that use multiple high-powered discrete diodes. Because of the high compliance voltage, the Vue-MV can control as many as 7 diodes in series at up to 10A
stack controller
The water-cooled laser diode stack controllers provide drive currents up to 120A and compliance voltages up to 24V
multi-channel
Multi-channel laser diode controllers are designed to provide stable, low noise drive current for a number of channels at the same time. Available with 8 channels at 6A per channel or 4 channels at 12A per channel.
DPss controller
incorporated Laser driver and two TEC driver( Laser + Crystal)Features:• 0.8A, 3A, or 4A diode current• Dual TEC controllers• Microprocessor controlled• WinVue user interface• OEM packaging options
Quantum cascade laser (Qcl) driver
Special driver to drive Quantum cascade Laser requiring a high-precision and ultra-low noise current source. Powering the QCL with this driver guarantees narrow linewidth, stable center wavelength, and repeatable application. The high modulation bandwidth and fast rise-time maintains modulation waveform integrity so that the laser output profile can be shaped exactly as your application requires.Features of QCL Lab series:• Output Current 0.5, 1.0, 1.5, 2.0 A• Stability 5 10 15 ppm• Analog modulation up to 2-3 MHz• Constant Current Mode operation• Touchscreen with intuitive user interface or remote
controlled by PC• All software and instrument documentation, as well as
additional data storage, provided on a USB flash drive
HcT High current Diode and Tec controller
HCT combines a high current laser diode driver with an integrated temperature controller for applications using high power fiber-coupled laser diodes.This unique driver offers all the performance of a bench top scientific controller with the size and attributes of an OEM controller. They are available as complete systems for stand-alone operation or in PCB options for embedding into another instrumentFeatures:• Integrated diode and TEC control• Computer control• WinVue user interface software• Stand-alone or embedded solutions• Optional heatsink assembly
a laser driver is a constant current source, delivering exactly the current to the laser diode that it needs for operation. They have a very linear characteristic and producing a low level of noise. Dependent on type they are providing different limiting functions to protect the laser diode against damaging, like spike protection, esD protection and soft start function.
They are providing different possibilities to connect the laser to the driver, determined by the internal connections between laser
and built in monitor photo diode. A few different basic types can be defi ned. Each product line is optimized for a different range of
applications.
laser DIoDe DrIVers
Packages
Packaging of components and modules includes proper heat sinking of the circuit elements and usually includes the appropriate cabling to the laser diode and power supply. Instruments include a power cord and user access inside the case is not necessary. An instrument comes typically with front panel, knobs and buttons and display to be controlled by a computer via USB, RS-232; RS-485 or GPIB and usually powered by AC. A module doesn’t include the display or power supply, and has the minimum required adjustments.To monitor status, an external volt meter is required. The module datasheet provides a transfer function to convert the voltage to actual laser diode current or photodiode current.Component do not have any moving parts, and the operating parameters needs to be set with external resistors or capacitors. They are mounted directly to a PCB with plate-through or surface mount (SMT) pins. They are available as DIP (dual-in-line package) or SIP (single-in-line package). Safety features are common to all different packages.
How to choose the right driver
• It is recommended to start with the current and voltage requirements of your laser diode - Maximum Output Current
• Compliance Voltage is the maximum voltage that can develop over the laser diode at maximum current. Important to choose a driver with high enough compliance voltage - especially if it has to drive multiple diodes in series or bars.
• Decision about package style is next step.
• Modulation bandwidth and noise are typically the next most important specifications.
TemPeraTure conTrollerThe temperature control system maintains a device ( in that case a laser) at a constant temperature. It uses a current or voltage source to drive power through actuators, based on feedback from a temperature sensor.
Resistance Temperature Detector (RTD) – is a sensor that uses the resistance temperature characteristic to measure temperature.Two basic types of RTDs are used: the wire RTD, usually made of platinum, and the thermistor, which is made of a semiconductor material.The wire RTD is a positive temperature coefficient sensor only, while the thermistor can have either a negative or positive temperature coefficient.Thermistor is a common temperature sensing device made of a semiconductor material that exhibits a large change in resistance for a small change in temperature.A Thermocouple (T/C) is made by joining two dissimilar metals. This junction produces an electrical voltage in proportion to the difference in temperature between the hot junction (sensing junction) and the lead wire connection to the instrument (cold junction).As actuators thermoelectric or Peltier devices and resistive heaters can be used to precisely control the temperature of the devices.
There are a few different types of temperature controllers realizing• temperature control without laser diode drive• temperature control separate from laser diode drive• temperature control and laser diode drive as a combined system (Dual or combined driver)
The PID controller algorithm involves three separate constant parameters, and is accordingly sometimes called three-term control: the proportional, the integral and derivative values, denoted P, I, and D. Can be interpreted in terms of time: • P depends on the present error,• I on the accumulation of past errors, • D is a prediction of future errors, based on current rate of change.
The weighted sum of these three actions is used to adjust the process via a control element such as the power supplied to a heating element.
Laser Diode Drivers & High Precision Temperature Controllers 05
06 Laser Diode Drivers & High Precision Temperature Controllers
QuesTIonnaIre
TemPeraTure conTroller summary
Model Package Max Output current
supply Voltage
Features
Temperature controller PTC series PTC5000 PCB
+/-5A 5 -30VDC linear T-stability < 0,0012°C
PTC10000 +/-10A Onboard and remote controllable
PTC2.5K chassis mount
+/-2,5A 4,5 - 30VDC
failsafe set point default circuit
PTC5K +/-5A PTC10K +/-10A WTC series WTC 3243 14-pin
DIP PCB +/- 2,2A 4,5 -
30VDC supports Thermistors, RTDs and IC sensors
WTC5V5APWM 22-pin PCB
+/-5A 4,5 - 5,5V
PWM - pulse width modulation
WHY series WHY 5640 14-pin DIP PCB
+/- 2,2A 5-24V general purpose T-controller
HTC series HTC1500 20-pin SIP PCB
+/-1,5A 5 -30VDC ultra stable PI control HTC3000 +/-3A supports Thermistors, RTDs
and IC sensors HTC4000 +/-4A linear T-stability < 0,0009°C RHM5K series RHM5K -CH chassis
mount 5A 4,5 -
30VDC unipolar, PID
PID series PID 1500 14-pin SIP PCB
+/-1,5A 5-12VDC Plug and play
5R series 5R7-570 PCB
12A 6-28VDC PI controller, heat and cool 5R7-001 25A 12-
36VDC PID controller
5R6-900 benchtop 10A 2-20VDC PID controller 5C series 5C7-195 benchtop 4A 85-
260VAC PID controller
laser DriverMaximum Output Current
Compliance VoltageNumber of devices / channels
Package, mounting optionsModulation bandwidth
NoiseOther features
Temperature controllerMaximum Output Current
Supply voltagePackage / mounting options
Control method (P,PI,PID)Features
laser Driver & Temperature controllerNumber of Lasers / Channels
Number of TEC
What?
laser DIoDe DrIVer summary
Model Max Output current
Package Features
Multi-diode, single channel driver (serial) MV series
MV-12-01 MV-12-02 MV-12-03
10A 12A 15A
embedded PCB, stand alone
Compliance Voltage 12V Compliance Voltage 10V Compliance Voltage 8V
MV-15-01 MV-15-02 MV-15-03
10A 12A 15A
Compliance Voltage 15V n.a. Compliance Voltage 10V
MV-21-01 MV-21-02 MV-21-03
10A 12A 15A
Compliance Voltage 21V Compliance Voltage 16V Compliance Voltage 14V
MV-40-01 MV-40-02 MV-40-02
10A 12A 15A
Compliance Voltage 40V Compliance Voltage 37V Compliance Voltage 27V
High current driver HC series
HC-550 50A embedded PCB, stand alone
cw only HC-2100 100A HCV 70A pulsed, (1kHz, Tr= 170µs)
Stack driver HV series
HV
120A
stand alone
Compliance voltage 5-24V Compact, water cooled
Multi channel driver MC series
MC-806 6A rack mount 8 channel MC-412 12A 4 channel
Dual driver (combined ) LDDT series
LDDTCxx20 1A(LD) /2,2A(TC)
Chassis mount
integrated FL500or WLD 3343 with WTC 3243
LDDTC2/2 2,2 A (LD) / 2,2A(TC)
ultra stable
High current dual driver
50A embedded PCB, stand alone
optional heatsink assembly
HCT series HCT
DPSS driver DPSS series
DPSS-0.8 0.8A embedded PCB, OEM package, stand alone
2 TEC controller Microprocessor controlled WinVue interface
Model Max Output current
Package Features
Quantum cascade Laser Driver QCL series QCL500
QCL1000 QCL1500 QCL 2000
0,5A 1A 1,5A 2A
Chassis mount, stand alone
Lowest noise, Ultra narrow linewidth,OEM
QCL Lab series
benchtop with touchscreen
Laser Diode Driver PLD series
PLD5K-CH 5A Chassis mount
slow start protection Constant current or constant power Parallel 2 units drive up to 25A
PLD10k-CH 10A PLD12,5K-CH
12,5A
LDD series
LDD200 200mA 8-Pin DIP PCB
slow start and current limit protection Constant current or constant power Buffered measurement outputs
LDD400
400mA
WLD series
WLD3343
3A
14-Pin DIP PCB
compact adjustable current limit and current range
FL series
FL500
500mA
12-Pin SMT PCB
Low cost two 250mA outputs ore one 500mA output
MPL series
MPL250 250mA PCB
low noise and ripple very long term stable current mechanical relay protection Onboard set points and limit controls
MPL500 500mA MPL2500 2,5A MPL7500 7,5A
LV series
LV15
15A
OEM package
cw and pulsed (1kHz/100Hz) build in Fan
© A
MS
Tech
nolo
gies
. All
right
s re
serv
ed. C
opyr
ight
by
AMS
Tech
nolo
gies
AM
S_La
serD
iode
Driv
er_2
0150
4
Optical Technologies
Power Technologies
Thermal Management www.amstechnologies.com
WHaT can We Do For you?Please contact us for further information
Germany
AMS Technologies AG(Headquarters) Fraunhoferstr. 22 82152 Martinsried, Germany
Phone +49 (0)89 895 77 0 Fax +49 (0)89 895 77 [email protected]
Italy
AMS Technologies S.r.l. Via San Bernardino, 49 20025 Legnano (MI), Italy
Phone +39 0331 596 693 Fax +39 0331 590 [email protected]
United Kingdom
AMS Technologies Ltd. Unit 11, St Johns Business Park Leicestershire LE17 4HB, UK
Phone +44 (0)1455 556360 Fax +44 (0)1455 552974 [email protected]
Spain
AMS Technologies S.L. C/Muntaner, 200 Atico, 4a 08036 Barcelona, Spain
Phone +34 (0) 93 380 84 20 Fax +34 (0) 93 380 84 [email protected]
ISO9001DIN EN ISO 9001TAW CertZert.Nr.: 29050313
France
AMS Technologies S.A.R.L. 1, avenue de l’Atlantique Courtaboeuf91976 Les Ulis, France
Phone +33 (0)1 64 86 46 00 Fax +33 (0)1 69 07 87 19
Nordic
AMS Technologies NordicAzpect Photonics ABAminogatan 3443153 Mölndal, Sweden
Phone +46 (0)8 55 44 24 80Fax +46 (0)8 55 44 24 [email protected]
Poland
AMS Technologies Polandul. Cystersow 1931-553 Krakow, Poland
Phone +49 (0)89 895 77 0 Fax +49 (0)89 895 77 [email protected]