Telescopic ForkliFT Trucks 835 / 1135 / 1335 IDENTICALMAINTENANCEwhateverthemodel...
-
Upload
vuongduong -
Category
Documents
-
view
213 -
download
0
Transcript of Telescopic ForkliFT Trucks 835 / 1135 / 1335 IDENTICALMAINTENANCEwhateverthemodel...
MT835 / MT1135 / MT1335
MT 133513 m / 3.5 T
MT 8358 m / 3.5 T
MT 113511 m / 3.5 Twith/withoutstabilizers
2
700506EN_B_0413_MT8_11_13.indd 2 22/04/13 11:07
MANITOU, your partner for your needs for more than50 years whatever your application.The new telescopic forklifts represent a complete revolutionin methods of lifting between 8 and 13 metres, and offerhigh performance lifting and loading capability:- Standard design benefits for ease of use and maintenance- Compact machines, maximum lift capacity- Choice of transmission - torque convertor or hydrostatic- Platform mode: Full range of MANITOU attachmentsThese forklifts are your allies in your quest for productivityand simplicity.The performance and manoeuvrability of the new telescopicMANITOU forklift trucks let you carry out all your building andrenovation tasks quickly and in complete safety.
MANITOU YOUR PARTNER FORALL YOUR HANDLING SOLUTIONSFOR OVER 50 YEARS...
3
700506EN_B_0413_MT8_11_13.indd 3 22/04/13 11:07
SIMPLICITY
You can work with SIMPLICITY and in complete SAFETY
▪ Platform usage: automatic blocking of the rear point (models MT 1135, MT 1335)
▪ Control of the hydraulic flow of the line to the attachment
▪ Automatic parking brake with starting assistance on slopes
▪ EASY CONNECT SYSTEM allowing for the hydraulic line depressurisation without stopping the engine
▪ Lock of the slope of the fork face to make your handling movements with a suspended load safer
▪ Digicode to start the machine
Simple oPeraTIon and MaInTenanCeIDENTICAL OPERATING system for every model
Spacious and comfortable cab
▪ panel shows all the information you need- direction, wheel alignment, boom angle,fuel level, hourometer, ...
▪ with state of charge monitor adapted tothree working modes - forks, bucket, jib
Ergonomic control
JSM® : Joystick Switch & Move
▪ Operating button for the attachment
▪ Operating button to raise or lower the telescope
▪ Lever for direction control - forward and reverse
4
700506EN_B_0413_MT8_11_13.indd 4 22/04/13 11:08
MT 835 / 1135 / 1335
IDENTICAL MAINTENANCE whatever the model
▪ The engine, transmission, hydraulics, cab, frame - all are sourced from the samedesign.
▪ 2-sided opening of the engine compartment - no need to undo any parts,thereby saving maintenance time.
MAINTENANCE and DIAGOSTICS for the machineshown on multi-function screen on the dashboard.
through a wide door witha single notched anti-slip step.
SAFE AND RAPID ACCESS
FULL
36
0° DEGREE VISIBILITY
5
700506EN_B_0413_MT8_11_13.indd 5 22/04/13 11:08
ProDUCTIVITY
6
102 HPpermanent four-wheel driveNew generation STAGE 3Bengine with particle filter.
Frame Levelling(standard on MT 1135 and MT 1335)
Substantial ground clearance
PerForManCe and MaInTenanCe
Accordingto your needshydrostatic transmission ortorque converter (inchingan optional extra) to respondto your working practice.
Permanent4 wheel drivePowerful braking appliedon both axles.
41cm
8 -11-13 m 3.5 T
+/-10°
One nominal loadcapacity
3 lifting heights
6
700506EN_B_0413_MT8_11_13.indd 6 22/04/13 11:08
MT 835 / 1135 / 1335
3 Steering modes
4 steering wheels for short turningspaces on restricted sites
2 front driving wheels to guaranteeon-road safety
Crabwise movement for lateralapproaches and delicate exits
Compact stabilizers(MT 1135 and MT 1335)
which remain within the working widthof the machine whatever their position.
Ultra-short turningradius
3.85 m
7
700506EN_B_0413_MT8_11_13.indd 7 22/04/13 11:08
MT 835 / 1135 / 1335VerSaTILITY
1 2 3
MATERIAL HANDLINGRehandling Bucket 4 in 1 Bucket Construction Bucket
LOAD PLACINGForks Hook Jib Lattice Jib Extensible Lattice Jib Winch
PLATFORMSFixed Platform 365 kg Extensible Platform 1000 kg
OTHERSConcrete Mixer Bucket Concrete Bucket
Your MANITOU forklift, a multi purpose machine...Thanks to the MANITOU attachment system, you can easily and quickly fit numerous attachments to your forklift - forks,buckets, mixers, jibs, platform...
...for a multitude of applicationsVersatility of MANITOU forklifts answers all your on-site needs, making the most of your working time and productivity:
▪ placing of loads
▪ distribution of material in restricted space
▪ bulk loading at depots and on-site
▪ placing suspended loads
▪ lifting personnel...
8
700506EN_B_0413_MT8_11_13.indd 8 22/04/13 11:09
MT 835 / 1135 / 1335ManIToU SerVICeS
MANITOU maintenance contract2 levels of maintenance adapted to your needs. You are sure of:
▪ equipment always in good working condition
▪ a reduction of repair costs as a result of regular servicing
▪ authentic standardised services
MANIPLUS extension of guaranteeWith MANIPLUS you can take out an extension of guarantee of 12 or 24 months.
EASY MANAGERA simple and flexible system for fleet management (with or without geolocation) toprovide optimum service from your machines. EASY MANAGER gives you:
▪ real-time materials management
▪ simple and easy way of managing your machinery activity and maintenance.
▪maximise your asset and safeguard your equipment
MANITOU spare partsUtilising genuine MANITOU spare parts is sure to prolong the best performance capability of your machine.Your MANITOU dealer has access to a stock of 70,000 part numbers, available in 24 hours in Europe (48 hours outside Europe).
▪ Labour
▪ Attendance costs▪ Labour▪ Attendance costs
▪ Parts and lubricants
Tailor-made finance to makethe best use of your fundsYou can plan the purchase of your forklift with peace of mindby using MANITOU* financing opportunities.You will have simple solutions adapted to your needs and seasonalrequirements. If you want to make a rapid investment, consider asking usfor a personalised proposal to take your situation into account.* MANITOU Finance solutions are available in certain countries.
10
700506EN_B_0413_MT8_11_13.indd 10 22/04/13 11:09
FT056EN_B_0413_MT835.indd
MT 835 MT 835 HLiftingMax. capacity 3500 kgMax. lifting height 7.75 mMax. outreach 4.45 mBreak-out force with bucket 6264 daNUnladen timeLifting 6.6 secsLowering 6.0 secsExtension 6.0 secsRetraction 5.6 secsCrowd 3.2 secsDump 3 secsTyres 400/80-24Braking
Service brake Oil immersed multi-disc braking onfront/rear axles
Parking brake Automatic Negative HandbrakeEngine PERKINS - STAGE 3BType 854E-34TACubic capacity 3400 cm3
Power 102 HP/75 kWMax. torque 420 Nm - 1400 rpmInjection directCooling waterLaden drawbar pull 8200 daN 6200 daN
Transmission torque converter4 wheel drive
hydrostatic4 wheel drive
Reversing shift electrohydraulic controlNumber of gears (forward/reverse) 4/4 3/2Max. travel speed(may vary according to applicable regulations)
26 kph 25 kph
Steering mode 4 wheel steer - 3 Steering Modes
Controls JSM® Joystick multi - functionLoad Limiter Cut off system - EN15000 Norm
Hydraulics
Pump gear type with priority valve125 l/min - 270 bar
CapacitiesHydraulic oil 175 lFuel 120 lUnladen weight (with forks) 7200 kg 7300 kgDimensions1. Front wheel centre to carriage 1.49 m2. Ground clearance 0.41 m3. Overall length to carriage 5.24 m4. Wheelbase 2.88 m5. Rear wheel centre to rear face 0.87 m6. Overall width of cab 0.88 m7. Inside tyre width 1.87 m8. Overall width 2.28 m9. Overall height 2.42 mStandard forks (length x width x thickness) 1200 x 125 x 45 mmTurning radius (over tyres) 3.85 mCarriage rotation (crowd/dump) 12° / 114°Noise and vibrationNoise at driving position (LpA) 82 dBEnvironmental noise (LwA) 106 dBVibration to whole hand/arm <2.5 m/s2
Vibration on driver's body 2 m/s2
This brochure describes versions and configuration options for Manitou products which may be fitted with different equipment. The equipment described in this brochure may be standard, optional or not available depending on version. Manitou reserves the rightto change the specifications shown and described at any time and without prior warning. The manufacturer is not liable for the specifications given. For more information, contact your Manitou dealer. Non-contractual document. Product descriptions may differfrom actual products. List of specifications is not comprehensive. The logos and visual identity of the company are the property of Manitou and may not be used without authorisation. All rights reserved. The photos and diagrams contained in this brochure areprovided for information only.MANITOU BF SA - Limited company with board of directors - Share capital: 39,547,824 euros - 857 802 508 RCS Nantes
Rough terrain load chartstandard EN1459 annex B
Machine on tyres with forks
50° 60° 68°D
C
B
A
8
7
6
5
4
3
2
1
0m
40°
30°
20°
10°
0°
-3°
7.75
D C B A 0.5m
5 4 3 2 1 0m
3500
KG30
00KG
2500
KG20
00KG
1500
KG
1200
KG
1150
KG
4.25 1.502.95 1.954.45 3.70 2.45 1.70
1 43
5
2
6
7
8
9
11
700506EN_B_0413_MT8_11_13.indd 11 22/04/13 11:09
FT057EN_A_0313_MT1135.indd
MT 1135 MT 1135 H MT 1135 HALiftingMax. capacity 3500 kgMax. lifting height 11.05 mMax. outreach 7.75 mBreak-out force with bucket 6305 daNUnladen timeLifting 8.5 secsLowering 7.0 secsExtension 13.0 secsRetraction 9.0 secsCrowd 3.0 secsDump 3.0 secsTyres 400/80-24BrakingService brake Oil immersed multi-disc braking on front/rear axlesParking brake Automatic Negative HandbrakeEngine PERKINS - STAGE 3BType 854E-34TACubic capacity 3400 cm3
Power 102 HP/75 kWMax. torque 420 Nm - 1400 rpmInjection directCooling waterLaden drawbar pull 9150 daN 7150 daN
Transmission torque converter4 wheel drive
hydrostatic4 wheel drive
Reversing shift electrohydraulic controlNumber of gears (forward/reverse) 4/4 3/2Max. travel speed(may vary according to applicable regulations)
26 km/h 25 km/h
Steering mode 4 wheel steer - 3 Steering Modes
Controls JSM® Joystick multi - functionLoad Limiter Cut off system - EN15000 Norm
Hydraulics
Pump gear type with priority valve125 l/min - 270 bar
CapacitiesHydraulic oil 175 lFuel 120 lUnladen weight (with forks) 8800 kg 8900 kgDimensions1. Front wheel centre to carriage 1.60 m2. Ground clearance 0.41 m3. Overall length to carriage 5.37 m4. Wheelbase 2.88 m5. Rear wheel centre to rear face 0.89 m6. Overall width of cab 0.88 m7. Inside tyre width 1.87 m8. Overall width 2.28 m9. Overall width (stabilizers lowered) 2.28 m10. Overall height 2.42 mStandard forks (length x width x thickness) 1200 x 125 x 45 mmTurning radius (over tyres) 3.85 mFrame levelling +/- 10°Carriage rotation (crowd/dump) 16°/110°Noise and vibrationNoise at driving position (LpA) 82 dBEnvironmental noise (LwA) 106 dBVibration to whole hand/arm <2.5 m/s2
Vibration on driver's body 2 m/s2
78
6
10
93
4
2
1 5
12
700506EN_B_0413_MT8_11_13.indd 12 22/04/13 11:09
FT057EN_A_0313_MT1135.indd
This brochure describes versions and configuration options for Manitou products which may be fitted with different equipment. The equipment described in this brochure may be standard, optional or not available depending on version. Manitou reserves the rightto change the specifications shown and described at any time and without prior warning. The manufacturer is not liable for the specifications given. For more information, contact your Manitou dealer. Non-contractual document. Product descriptions may differfrom actual products. List of specifications is not comprehensive. The logos and visual identity of the company are the property of Manitou and may not be used without authorisation. All rights reserved. The photos and diagrams contained in this brochure areprovided for information only.MANITOU BF SA - Limited company with board of directors - Share capital: 39,547,824 euros - 857 802 508 RCS Nantes
Rough terrain load chartstandard EN1459 annex B
Machine on stabilizers with forks
Machine on tyres with forks
0
10
1
2
3
4
5
6
7
8
9
-1
11
8 7 6 5 4 3 2 1 0m
3500
KG
3000
KG25
00KG
2000
KG16
00KG
1200
KG
D
C
B
A
E
0.5m
7.60 4.856.50 4.25
5.65 3.75
1°
10°
20°
30°
40°
50° 60° 72°
11.05
68°60°50°
40°
30°
20°
10°
0°-3°
10.75
8 7 6 5 4 3 2 0m1
10
0
1
2
3
4
5
6
7
8
9
-1
11
2.052.804.155.356.852.353.357.75
0.5m
E
D
C
B
A40
0KG 60
0KG 10
00KG 15
00KG
2000
KG
3000
KG25
00KG
3500
KG
13
700506EN_B_0413_MT8_11_13.indd 13 22/04/13 11:09
FT030EN_C_0413_MT1335.indd
MT 1335 MT 1335 H MT 1335 HALiftingMax. capacity 3500 kgMax. lifting height 12.55 mMax. outreach 8.75 mBreak-out force with bucket 6400 daNUnladen timeLifting 9.8 secsLowering 8.2 secsExtension 14.2 secsRetraction 9.7 secsCrowd 2.7 secsDump 2.8 secsTyres 400/80-24BrakingService brake Oil immersed multi-disc braking on front/rear axlesParking brake Automatic Negative HandbrakeEngine PERKINS - STAGE 3BType 854E-34TACubic capacity 3400 cm3
Power 102 HP/75 kWMax. torque 420 Nm - 1400 rpmInjection directCooling waterLaden drawbar pull 9800 daN 7800 daN
Transmission torque converter4 wheel drive
hydrostatic4 wheel drive
Reversing shift electrohydraulic controlNumber of gears (forward/reverse) 4/4 3/2Max. travel speed(may vary according to applicable regulations) 26 km/h 25 km/h
Steering mode 4 wheel steer - 3 Steering Modes
Controls JSM® Joystick multi - functionLoad Limiter Cut off system - EN15000 Norm
HydraulicsPump gear type with priority valve - 125 l/min - 270 barCapacitiesHydraulic oil 175 lFuel 120 lUnladen weight (with forks) 8800 kg 8900 kgDimensions1. Front wheel centre to carriage 1.80 m2. Ground clearance 0.41 m3. Overall length to carriage 5.86 m4. Wheelbase 2.88 m5. Rear wheel centre to rear face 1.18 m6. Overall width of cab 0.88 m7. Inside tyre width 1.87 m8. Overall width 2.28 m9. Overall width (stabilizers lowered) 2.28 m10. Overall height 2.42 mStandard forks (length x width x thickness) 1200 x 125 x 45 mmTurning radius (over tyres) 3.85 mFrame levelling +/- 10°Carriage rotation (crowd/dump) 12°/114°Noise and vibrationNoise at driving position (LpA) 82 dBEnvironmental noise (LwA) 106 dBVibration to whole hand/arm <2.5 m/s2
Vibration on driver's body 2 m/s2
34
2
1 5 78
6
10
9
14
700506EN_B_0413_MT8_11_13.indd 14 22/04/13 11:09
FT030EN_C_0413_MT1335.indd
This brochure describes versions and configuration options for Manitou products which may be fitted with different equipment. The equipment described in this brochure may be standard, optional or not available depending on version. Manitou reserves the rightto change the specifications shown and described at any time and without prior warning. The manufacturer is not liable for the specifications given. For more information, contact your Manitou dealer. Non-contractual document. Product descriptions may differfrom actual products. List of specifications is not comprehensive. The logos and visual identity of the company are the property of Manitou and may not be used without authorisation. All rights reserved. The photos and diagrams contained in this brochure areprovided for information only.MANITOU BF SA - Limited company with board of directors - Share capital: 39,547,824 euros - 857 802 508 RCS Nantes
Rough terrain load chartstandard EN1459 annex B
Machine on tyres with forks Machine on stabilizers with forks
Machine on stabilizers with platform(MT 1335 HA versions)
20°
10°
0°
30°
40°
-3°
50° 60° 71°
13
0
1
2
3
4
5
6
7
8
9
10
11
12
14
-1
12.30
410 9 0m1235678
2.252.55
3.655.106.358.25
E
D
C
B
A3000KG
300K
G 400K
G 600K
G 1000
KG12
00KG
1600
KG20
00KG
2500
KG
800K
G
3500KG
7.30 3.05 1.854.255.608.754.555.858.05
1.805.206.758.75
3000
KG 3500
KG
2000
KG25
00KG
1200
KG
1600
KG
1000
KG
E
D
C
B
A
13
14
12
11
10
9
8
7
6
5
4
3
2
1
0
-1
50° 60° 70° 75°
12.55
8 7 6 5 4 3 2 1 0m910
0.5m
40°
30°
20°
10°
1°
kg + =700kg
kg + =365kg
kg + =150kg
EN 280141516
13121110
9
87654
321
0-1
8 7 6 5 4 3 2 1 0 -1 -2 -3 -491011
0kg
50°
0°10°
20°
30°
40°
75°60°
70°
14.40m12.40m
5.78m
kg + =1000kg
15
700506EN_B_0413_MT8_11_13.indd 15 22/04/13 11:09