Telemetry module for work machines
8
Click here to load reader
-
Upload
byte-lab -
Category
Devices & Hardware
-
view
29 -
download
0
Transcript of Telemetry module for work machines
EMBEDDED INTELLIGENCE
Byte Lab Ltd.
Communication and Control device for Work MachinesCentral processing unit
Our Communication and Control device is a great additional equipment for various range of work machines.
Having this unit installed you would be able to monitor your whole working process and optimize it.
Immediate bene�t is reduction of operational cost.
Our Communication and Control device includes great range of features. These are the standard ones:
GPS receiver for position detection
GPRS modem for communication with
the server
Accelerometer to detect collisions
The installation for ignition key detection
Standard module also includes:
Connectors for connecting external sensors
The initial setting of the user interface on the web site
First start-up of SIM card and device on the server
Additional features that can be added on your customized Central processing unit:
RFID reader and one user RFID card for identifying machine operator.Up to �ve RFID cards (one service that has permission to drive the machine even when it is blocked and four for the drivers)
RFID TEMPERATURE SENSORS
Up to four temperature sensors. Temperature of the engine, hydraulics, transmission and water.
RPM COUNTER METER SENSORS
Up to three RPM Counter meter sensors (enginerevs, speed over the wheel, RPM of Hydro pump)
BATTERY SENSOR
Up to 133V
Monitoring battery charge level
Monitoring water level in the batteries (has water / no water)
WATER LEVEL SENSOR FUEL LEVEL SENSOR
Sensor of fuel level in the tank (if it can be installed)
OIL PRESSURE SENSOR
Oil pressure sensor on the internal combustion engine (connects to the existing, if any)
MOTOR IMMOBILIZER
Disabling all the functions
Additional features that can be added on your customized Central processing unit:
ALERT SIRENONE OUTPUT FOR
ADDITIONAL EQUIPMENTONE INPUT FOR
ADDITIONAL EQUIPMENT
REMOTE OPERATION CONTROL CLOUD ADMINISTRATION
Additional features that can be added on your customized Central processing unit:
Communication and Control device for Work MachinesCentral processing unit
Byte Lab Inc.Dragutina Golika 6310000 ZagrebCroatiae-mail: [email protected]: +385 91 3893 514www.byte-lab.com
EMBEDDED INTELLIGENCE
www.linkedin.com/company/byte-lab
twitter.com/Byte_Lab/
www.facebook.com/bytelab
For any additional information, please contact us.
