TELECOMMUNICATIONS AND POWER INDUSTRY - Elplast · rpp and rpe 10 fittings zrg 12 universal...
-
Upload
truongquynh -
Category
Documents
-
view
215 -
download
0
Transcript of TELECOMMUNICATIONS AND POWER INDUSTRY - Elplast · rpp and rpe 10 fittings zrg 12 universal...
MORE THAN 30 YEARS OF EXPERIENCE
INDUSTRY CATALOGUE TELECOMMUNICATIONS
AND POWER INDUSTRY
WATER AND SEWAGE
SYSTEMS
INDUSTRY
AND MINING
TELECOMMUNICATIONS
AND POWER INDUSTRY
INTERNAL
INSTALLATIONS
SPORTS
AND RECREATION
ELPLAST+ is a Polish, dynamic and family-led production company with more than 30 years of experience in the production of plastic pipes, fittings and wells.
TELECOMMUNICATIONS AND POWER INDUSTRY / INDEX
PIPES
RHDPE for cable protection4
RHDPEp spacer pipes 6
two-part 8
RPP and RPE 10
FITTINGS
ZRg 12
UNIVERSAL CONTAINERS
TYPE A2, TYPE B2 14
CONNECTOR CONTAINERS
ZZ-PE 16
with side cover 18
MIKRO 20
WELLS
SKO-1-PE, SKO-2/4-PE 22
2/3
PIPES RHDPE, RHDPE-C, RHDPE-UV and RHDPEt
for protection of fibre and electric cables
MATERIAL
polyethylene high density (HDPE)
RANGE
Ø 25, 32, 40 and 50 mm
APPLICATION
for secondary sewage systems and cable pipelines
VALUES
low weight perfect
tightness
easy and quick assembly
possibility of assembly in hard conditions
easy network expansion
product durability - good mechanical strength, resistance to corrosion, aggressive factors in the ground and chemicals
resistance to low temperatures
recyclable
All our products have proper standards and certifications.
TELECOMMUNICATIONS AND POWER INDUSTRY / PIPES
INTERNAL GROOVED SURFACE
AND THE MICRO-LAYER OF
PERMANENT SLIDING
SUBSTANCE FACILITATES
INSERTION OF CABLES
AT THE CUSTOMER'S REQUEST
Possibility of pre-installing a pull cord. Possibility of pipe production in any colour.
4/5
SPACER PIPES RHDPEp for drilling and ramming
MATERIAL
polyethylene high density (HDPE)
RANGE
Ø 63 to Ø 630 mm
APPLICATION
used as conduits at cable duct crossings with other infrastructure devices, passages under the roads, watercourses, railroads and other situations
VALUES
low weight perfect
tightness
easy and quick assembly, also in hard conditions
easy network extension
product durability - good mechanical strength, resistance to corrosion, aggressive factors in the ground and chemicals
resistance to low temperatures
All our products have proper standards and certifications.
TELECOMMUNICATIONS AND POWER INDUSTRY / PIPES
DUE TO HIGH FLEXIBILITY AND
POSSIBILITY OF WELDING INTO
LONG, MONOLITHIC SECTIONS, HDPE
SPACER PIPES ARE PERFECT FOR
DIRECTIONAL DRILLINGS
POSSIBILITIES
It is possible to make the pies in two- or three-layer version at the customer's request.
6/7
CASING PIPES TWO-PART for protection of existing installation
MATERIAL
polyethylene (HDPE) or polypropylene
RANGE
Ø 58 to Ø 225
APPLICATION
for the protection of existing or new installation of teletechnical, power pipes and cables, etc.
VALUES
easy and quick assembly and disassembly,
product durability - good strength mechanical strength, resistance to corrosion, aggressive factors in the ground and chemicals
recyclable
All our products have proper standards and certifications.
TELECOMMUNICATIONS AND POWER INDUSTRY / PIPES
TWO-PART PIPES
ARE ALSO USED
UNDER ROADS,
STREETS
AND TRACKWAYS
Pipes have a longitudinally profiled cut at their length that enables closing and opening of the pipes and inserting and extracting the cable.
8/9
PIPES RPP and RPE for primary cable ducts
MATERIAL VALUES
polypropylene
polyethylene
RANGE
Ø 50, 75, 100 and 110 mm
low weight high
impact performance
perfect tightness
easy and quick assembly
possibility of assembly in hard conditions
easy network expansion
good dielectric properties
product durability - good mechanical strength, resistance to corrosion, aggressive factors in the ground and chemicals
resistance to low temperatures
recyclable
All our products have proper standards and certifications.
TELECOMMUNICATIONS AND POWER INDUSTRY / PIPES
EVEN IN THE
TEMPERATURE OF
-20°C
POLYPROPYLENE
PIPES ARE RESISTANT
TO IMPACTS
Black is the standard colour. On the customer's demand it is possible to manufacture pipes in other colours.
10/11
FITTINGS ZRg to connect pipes
MATERIAL
high density polyethylene (HDPE)
RANGE
Ø 75 mm to Ø 225 mm
APPLICATION
to conenct pipes:
RHDPEp
RPP
Thick wall RPE
TYPES
to connect pipes:
ZRg - standard product ZRgt -
flame-retardant product ZRguv -
product with enhanced UV resistance
VALUES
low weight
easy and quick assembly
easy network expansion
product durability - good mechanical strength, resistance to corrosion, aggressive factors in the ground and chemicals
recyclable
All our products have proper standards and certifications.
TELECOMMUNICATIONS AND POWER INDUSTRY / FITTINGS
POSSIBILITY OF
ASSEMBLY ALSO IN
HARD CONDITIONS
The fittings are equipped with two rubber gaskets that ensure good connection tightness.
12/13
UNIVERSAL CONTAINERS A2 TYPE, B2 TYPE telecommunications
MATERIAL
polyethylene
APPLICATION
for storage and protection of small connector muffs from mechanical damages
for fibre cable reserves possibiliy
of cable pulling in the case of arcs with small radius
in underground installations cable wells, cellars
VALUES
low weight - total (body + cover) for A2 and B2 fittings does not exceed 11 kg
small dimensions
perfect tightness - also in the places where pipes and cables are inserted
easy and quick assembly
possibility of assembly in hard conditions
product reliability - good mechanical
strength constructions stiffness, resistance to corrosion and chemicals
resistance to low temperatures
recyclable
All our products have proper standards and certifications.
TELECOMMUNICATIONS AND POWER INDUSTRY
TELECOMMUNICATIONS AND POWER INDUSTRY / UNIVERSAL CONTAINERS
DUE TO SMALL
DIMENSIONS THEY CAN BE
USED IN CONFINED
SPACES
In the A2 type container there is a pipe that increases the acceptable pressure on the cover. At the customer's request the well cover can be equipped with an additional lock.
14/15
CONNECTOR CONTAINERS ZZ-PE-0, ZZ-PE-1 and ZZ-PE-1W, ZZ-PE-2 and ZZ-PE-2W
for protection of connector muff, reserve of fibre and telecommunication cables
MATERIAL
polyethylene
APPLICATION
for assembly in telecommunication networks
TYPES
ZZ-PE-0,
ZZ-PE-1 and ZZ-PE-1W single-
connector ZZ-PE-2 and ZZ-PE-2W
double connector
VALUES
low weight perfect
tightness
easy and quick assembly
possibility of assembly in hard conditions
easy network expansion
easy cleaning product
durability
resistance to low temperatures
recyclable
All our products have proper standards and certifications.
TELECOMMUNICATIONS AND POWER INDUSTRY / CONNECTOR CONTAINERS
THE CONNECTOR BODY
HAS A PROPER SHAPE
THAT ENSURES GOOD
ANCHORING IN THE
GROUND
The pipes can be inserted using: rubber gaskets, welded half-couplings or couplings with thread and nut at the construction site.
16/17
CONNECTOR CONTAINER ZZ-PE-1 with side cover for the assembly of telecommunication installations
MATERIAL
polyethylene
APPLICATION
for assembly in telecommunication networks and for protection of the connector muff and fibre cable reserve in a cable duct. Adapted for Ø 40 mm diameter pipe by default
VALUES
low weight perfect
tightness
easy and quick assembly, also in hard conditions
easy network expansion easy
cleaning
resistance to low temperatures
recyclable
All our products have proper standards and certifications.
TELECOMMUNICATIONS AND POWER INDUSTRY / CONNECTOR CONTAINERS
SIDE COVER THAT ENABLES
INSERTING THE EXISTING PIPE
WITH A CABLE INTO THE
CONTAINER WITHOUT CUTTING
THE CABLE
AT THE CUSTOMER'S REQUEST
It is possible to prepare the side cover for connection of the Ø 20 mm, Ø 25 mm, Ø 32 mm and Ø 50 mm diameter pipe.
18/19
CONNECTOR CONTAINER MIKRO for the assembly of telecommunication installations
MATERIAL
polyethylene
APPLICATION
for assembly in cable ducts for protection of small connector muffs and for cable reserves
VALUES
small total weight (body + cover) (approx. 12 kg)
perfect tightness easy and
quick assembly
possibility of assembly in hard conditions
easy network expansion
easy cleaning product
durability
resistance to low temperatures
recyclable
All our products have proper standards and certifications.
TELECOMMUNICATIONS AND POWER INDUSTRY / CONNECTOR CONTAINERS
CONTAINER USED FOR
PROTECTION OF SMALL
CONNECTOR MUFFS WITH
DIAMETER OF 170 MM AND
CREATING THE CABLE
RESERVES
When compared to ZZ-PE-1 the container is more compact with reduced muff chamber diameter and less weight.
20/21
TELECOMMUNICATION WELL SKO-1-PE, SKO-2/4-PE for the assembly of telecommunication installations
MATERIAL
polyethylene
APPLICATION
for construction of cable ducts
wells provide access to pipes while conducting works related to cable pulling and connecting
They play the role of switching wells in ducts and are used as pass-through, corner or junction wells
VALUES low weight perfect
tightness
easy and quick assembly
possibility of assembly in hard conditions
easy network expansion
easy cleaning product
durability
resistance to low temperatures
recyclable
All our products have proper standards and certifications.
TELECOMMUNICATIONS AND POWER INDUSTRY / WELLS
DUE TO LOW WEIGHT, THE
POLYETHYLENE SKO WELLS
ARE A PERFECT ALTERNATIVE
FOR CONCRETE WELLS
The SKO-2/4-PE well is also manufactured with a version with a trap.
22/23
ELPLAST+ Sp. z o.o.
ul. Niepodległości 8
44-336 Jastrzębie-Zdrój
tel +48 32 471 80 40
fax +48 32 471 10 43
www.elplastplus.pl