Q2 2016 Mainstream Products -

Applications and New Product Update

Mainstream Products include…

Oscilloscopes – up to 3.5GHz

Bandwidth, plus Current, Differential,

and High Voltage probes.

Spectrum Analyzers up to 7.5GHz

Bandwidth, along with Signal

Processing Software and Vector

Signal Generators.

Dozens of DMMs, Power Supplies,

SMUs, and AFGs

Basic Mid-Range

Performance you need at a price you can afford

50 – 200MHz

The most advanced tools for debug and design verification

100MHz – 3.5GHz

Tektronix also has higher performance equipment…

Working on 100G / 400G communications?

Need to test for compliance to standards like USB 3.1? DDR4?

PCIe3?

Need an oscilloscope with 70 GHz bandwidth along with the industry’s

lowest noise, highest ENOB?

Do you need to measure Signal Integrity, Time Domain Reflectometry

(TDR) and collect S-parameter Measurements?

Looking for a logic analyzer with speed and flexibility to detail today's

fastest microprocessors and memory designs?

Visit www.Tektronix.com or call 800-833-9200 to learn about our performance products for your

applications.

Applications for our Mainstream Products

EMI Pre-compliance Testing MDO4000 and MDO3000 oscillocopes, RSA306 spectrum analyzer

Conducted and Radiated Emissions Testing

Download RSA306 white paper -

http://www.tek.com/document/appli

cation-note/low-cost-emi-pre-

compliance-testing-using-

spectrum-analyzer

Download MDO4000 white paper -

http://www.tek.com/document/appli

cation-note/practical-emi-

troubleshooting

Applications for our Mainstream Products

IoT Device Testing 2281S, DMM7510, RSA306

2281S Battery Simulator and Tester

Characterize and Test Batteries

Determine SOC

Create Battery Operation Models for

Simulations

DMM7510 – 7.5 Digit DMM

Ultra Low Power capture during

Standby, Start-Up, Transmit, and

Shutdown Modes

RSA306 Spectrum Analyzer

Monitor and measure transmissions

Support for WiFi, Bluetooth and other

standards

Applications for our Mainstream Products

Battery Charge/Discharge Testing 2450/2460, 2281S

2281S Battery Simulator and Tester

Characterize and Test Batteries.

Determine SOC.

Create Battery Operation Models for

Simulations.

2450 or 2460 SMU

Precise four-quadrant operation for

charge and discharge testing.

Measures both current and voltage.

Flexible bench instrument for other

applications.

Applications for our Mainstream Products

Power Supply Design and Test DPO7000/MSO5000, MDO4000, MDO3000 Oscilloscopes

DPOPWR on an MSO5000 or DPO7000

oscilloscope - Advanced Power Measurement

and Analysis software to measure and analyze

power dissipation in switching devices, and

measure and compute magnetic losses.

Measurements provide insight into the

input/output of power supplies.

DPO4PWR/MDO3PWR on an MDO

oscilloscope provides measurements to

characterize power supplies: Switching

Component Analysis, Input Analysis, and

Output Analysis.

See http://www.tek.com/current-probe for current probe selection.

Also see http://www.tek.com/oscilloscope/ths3000-handheld-

oscilloscope for our handheld, 4 isolated channel scope.

Applications for our Mainstream Products

Oscilloscope Serial Bus Decodes

Automatic trigger, decode, and search on bus

events and conditions gives you a robust set of

tools for debugging serial interfaces such as

I2C, SPI, RS-232/422/485/UART, USB2.0, CAN,

LIN, FlexRay, MIL-STD-1553, *Ethernet, and

I2S/LJ/RJ/TDM. (*Ethernet decode on MDO4000, MSO5000 and DPO7000 scopes.)

In addition to seeing decoded packet data on

the bus waveform itself, you can view all

captured packets in a tabular view much like you

would see in a software listing. Packets are time

stamped and listed consecutively with

columns for each component (Address, Data,

etc.). Save the event table data in .CSV format.

See http://www.tek.com/technology/embedded-serial-technologies

Applications for our Mainstream Products

Energy Efficiency, Harmonics, and Standby Power PA1000, PA3000 Power Analyzers (and oscilloscopes for power supply harmonics)

The Tektronix PA1000 single-phase

power analyzer and the PA3000

multi-phase power analyzer are used

to measure power efficiency, energy

consumption, standby power,

harmonics, In-rush current, and

standards testing.

Read more at: http://www.tek.com/power-analyzers

Power Supply harmonics

measurements can also be

performed with an oscilloscope,

current probe, and our Power

Analysis software.

Applications for our Mainstream Products

Jitter Analysis DPO7000/MSO5000 oscilloscopes with DPOJet Software

DPOJET is the premiere eye-diagram, jitter,

noise and timing analysis package available

for real-time oscilloscopes. DPOJET

provides the highest sensitivity and accuracy

available in real-time instruments. With

comprehensive jitter and eye-diagram

analysis and decomposition algorithms

DPOJET simplifies discovering signal

integrity concerns and jitter and their related

sources in today's high-speed serial, digital,

and communication system designs.

Analysis options scale from timing

(standard), to jitter (opt. DJA) and noise (opt.

DJAN) analysis.

See http://www.tek.com/application/jitter-measurement-and-timing-

analysis

Versatile and powerful debug

tools for components, circuits,

boards, and systems.

Generate AM/FM/PM and most

vector modulation and telecomm

protocols signals via TSG4100A.

Test sensitivity, distortion,

receiver blocking, DTF, Return

Loss, and more.

Read more at

http://www.tek.com/usb-spectrum-analyzers

TSG 4100A

Modulation

Signal

Spectrum

Analysis RSA306

Applications for our Mainstream Products

RF Component Testing and Transceiver Testing RSA507/607 with Tracking Generator option or

TSG4100A Vector Signal Generator + RSA306 Spectrum Analyzer

Plus SignalVu Software

RSA503A, RSA507ARSA603A, RSA607A

• Low cost alternative to a potentiostat

• Perform Cyclic, Squarewave,

or Galvanic Voltammetry

• Simple user interface for fast test

setup and analysis of results

• Real-time plotting of

voltammograms on the front

panel display

Applications for our Mainstream Products

Electrochemistry Measurements2450 or 2460 Touchscreen SMU with eChem Test Scripts and Probe

Read more at

http://www.tek.com/electrochemistry-lab-systems

Precision DMM measurement,

switching, and control in a tightly

integrated enclosure for either rack-

mount or bench-top applications.

2700/2750 systems support up to

200 channels; 3700A systems

support up to 576 channels.

Applications for our Mainstream Products

Data Acquisition and Process Control2700/2750, 3700A Switch Systems

Read more at

http://www.tek.com/switching-and-data-acquisition-systems/2700-multimeter-data-acquisition-switch-systems

What’s New?

Tektronix MDO4000C The World’s First Scope with a Built-in Spectrum Analyzer

NEW ‘C’ model:

Customizable and fully upgradable 6-in-1

integrated oscilloscope with synchronized

insights into analog, digital, and RF signals

• Oscilloscope

• Spectrum Analyzer

• Arbitrary/Function Generator

• Logic Analyzer

• Protocol Analyzer

• DVM/Frequency Counter

The MDO4000C is completely customizable

and fully upgradable so you can add the

instruments you need now – or later.

Read more at http://www.tek.com/oscilloscope/mdo4000c

Tektronix PA3000 4-channel, Multi-phase AC/DC power analyzer

NEW

1 to 4 channel power analyzer optimized for

testing today’s single and multi-phase, high

efficiency power conversion products and

designs.

• 1 to 4 channels supports single-and three

phase applications

• 20 mW standby power measurements

• 1 MHz bandwidth

• Harmonic analysis to 100th order

• ±0.04% basic voltage and current

accuracy

Read more at http://www.tek.com/power-analyzer/

TekScope Anywhere Waveform Analysis SoftwareCollaborate, Analyze, Document Offline

TekScope Anywhere™ brings the power of

oscilloscope analysis environment to the PC:

• View, measure, and analyze data captured in

a lab, independent of the oscilloscope

hardware

• 50+ Parametric and Cursors Measurements

• Conduct Jitter analysis on your PC

• Interactive plots, including zoom functionality

• Easily document measurement results and

configuration details with detailed test report

Compatible with most common Save/Recall waveform files, independent

of the hardware acquisition, including: Tektronix, LeCroy, and Keysight

oscilloscope formats (wfm, .isf, .csv, .h5, .tr0, .trc, and .bin).

Read more at

http://www.tek.com/datasheet/collaborate-analyze-document-offline-2

RSA306B USB Spectrum Analyzer9kHz to 6.2GHz

•Unmatched Price/Performance at $3890,

includes 3 year warranty

•Small form factor: USB powered and

controlled, highly portable

•6.2 GHz Signal Analyzer with 40 MHz Real

Time Bandwidth

•Runs with SignalVu-PC software

◦Optional capabilities, such as Bluetooth, Wi-Fi,

LTE, P25, and Audio Analysis

◦NEW Signal classification/survey application

reduces need for high-level operators for survey

and interference hunting tasks

◦Long duration signal recording

Read more at http://www.tek.com/spectrum-analyzer/rsa306

RSA500 Series Real Time Spectrum Analyzer9kHz to 3GHz or 9kHz to 7.5GHz, each with 40 MHz real time bandwidth; optional

tracking generator 10MHz to maximum frequency range of unit.

• Spectrum Management, Regulatory

Monitoring

◦ See signal compliance at a glance using

industry’s best open signal database

• Interference Hunting

◦ Quickly discover co-channel interference and

transients with DPX, direction finding, GPS

mapping

• Installation and Maintenance

◦ Cable & antenna testing

• Field Ready

◦ Take the weight out of your hands – carry a

tablet, keep the instrument in your bag

Accessories include calibration kits, powered bias-T,

Panasonic ToughPad® tablet PC, carrying cases, directional

antennas, cables and adapters

• R&D

◦ Powerful debug tools like DPX and Domain

correlation

◦ Address today & tomorrow’s most popular wideband

signals with 40 MHz bandwidth

• Design Validation

◦ Complete support for popular IoT wireless standards

• Characterize components for gain

◦ Tracking generator with internal bridge

• Manufacturing Test

◦ Measurement speed, performance in the lab and

automated testing

RSA600 Series Real Time Spectrum Analyzer9kHz to 3GHz or 9kHz to 7.5GHz, each with 40 MHz real time bandwidth; optional

tracking generator 10MHz to maximum frequency range of unit.

DMM7510 7½-Digit Graphical Sampling Multimeter

First in a new class of DMMs: the graphical

sampling multimeter

First 7½-digit DMM with a capacitive

touchscreen/display

First DMM to integrate a 1MS/sec, 18-bit

digitizer and interactive display with capability to

trigger on current or voltage level, and provide

storage of 11M readings

See all DMMs at http://www.keithley.com/products/dcac/dmm

2281S Battery Simulator and Precision DC Power Supply

Create a complete battery model during

battery testing

Precision DC power supply, with DMM-quality

high resolution, low current measurements

capability

Optimized performance for production tests

Read more about the 2281S at

http://www.tek.com/dc-power-supply/series-2281s-battery-simulator

Series 2380 DC Electronic Load

Single output, standalone loads with 200W,

250W and 750W models

Multiple operation modes with up to 25 kHz of

dynamic cycling

Superior voltage/current resolution and

readback accuracy

Read more about the 2380 series at

http://www.tek.com/dc-electronic-load/series-2380

AFG3151C, AFG3152C 150 MHz Arbitrary Function Generator

150 MHz Bandwidth, 1GS/s Sample Rate

Single and Dual Channel Models

See many more AFGs at http://www.tek.com/arbitrary-function-generator

2450, 2460, 2461 SMUsThe World’s First Source-Measure Unit Instruments with Touchscreen

Technology

Source and measure voltage or current via touchscreen or programmatic

interface

4 quadrant operation for “sinking” current and voltage

Enhanced sensitivity with low voltage and low current ranges

Cyclic Voltammetry measurements and voltammogram display

Models:

2450 - 20W / 1A max

2460 - 100W / 7A max

2461 - 1000W/10A max

See all SMU products at http://www.keithley.com/products/dcac/currentvoltage

TRCP Rogowski Current Probes

Work with any instrument that has a BNC interface

Allow you to easily connect to large connection points such as bus

bars, or connect to points as small as IC legs

3 Models:

TRCP0300 - AC only, 9 Hz to 20 MHz, 250 mA to 300 A peak

TRCP0600 - AC only, 12 Hz to 30 MHz, 500 mA to 600 A peak

TRCP3000 - AC only, 1 Hz to 16 MHz, 500 mA to 3,000 A peak

Read more at http://www.tek.com/accessories

Let me know how I can help you succeed.

Jeff SableMainstream Sales Manager – New England I manage sales of Tektronix and Keithley products through our distribution partners throughout New England.

jeff.sable@tektronix.com