TEKSIN HOT DIP GALVANIZED WASTE CONTAINER

TEKSIN has provided to be a leading company MOST POWERFUL, highest quality ,most affordable rates and SERIAL PRODUCTION about waste container production in Turkey.It serves to the enviroment and countries with 40 years of knowledge and with 25 years of experience in manufacturing the product waste containers.

Our Company has brought to the country’s economy by establishing Hot Dip Galvanizing (Zinc Plated) facility in its own constitution.

Our company, has provided to be long lasting by covering hot-dipped galvanized garbage containers and was presented to Municipalities appreciation by singing a policy in Turkey.Currently %99 of Municipalities in Turkey prefer hot-dip galvanized waste container.

Our Company has reached nearly 2800 municipalities of 3200 that located in Turkey and has exported %10 of it’s production abroad.

Waste container manufacturing is realized in the area 12,000 m2 covered total 48,000 m2 of our new factories and produce a monthly 7,500 units of various types of waste containers.

Our company set up Underground waste Container Manufacturing by singin a policy again in 2011 and began compatible with the environment, aesthetics and quality production.Our company aims to be leader in underground containers by providing to remain foreign exchange that going abroad added value to Turkis economy with reasonable price and quality.

To leave a cleaner world for future generations, our company has always serve .

200 LT. HOT DIP GALVANIZED WASTE CONTAINER TECHNICAL FEATURES 1-The hull and cover are manufactured from a single piece of 1.5 mm. thick iron sheet.

2- The hull is goffered from two pieces of iron sheet and reinforced by being pressed.

3- The opening of the hull is surrounded by reinforced profile.

4- The lid is laminated by a single piece of iron sheet by press and reinforced.

5- There are handles for loading on the sides.

6- There are 2 carrying rollers, rotating 360º with a size of 150 x 45 and in conformity with TS EN 12532 Standard and two feet.

7- The bottom and sides are completely welded.

8- The container is manufactured in conformity with the technical drawing and technical features and completely galvanised with the hot immersion Galvanising system in accordance with the TS EN ISO 1461 Standard.

9- In the front side; the name of the Municipality and a drawing which shows a person throwing garbage are applied.

TECHNICAL PICTURE

400 LT. HOT DIP GALVANIZED WASTE CONTAINER TECHNICAL FEATURES1-The hull is goffered from a single piece of 2 mm. thick iron sheet; the hull and the sides are reinforced by being pressed. The side of the hull is twisted 1,5 cm, so that it grasps the hull from outside; the ground, corners and upper back opening are radusted.

2- The opening of the hull is surrounded by a U-profile of 25 x 50 mm.

3- The hull is welded completely with komple gasous welding and without any dross.

4- The lifting flanges are 4 mm.; the connection parts of the rollers are 3 mm. and they are welded to the hull with reinforcement. At sides carrying handles are existed.

5- The lid is laminated by a single piece of 1,5 mm. thick iron sheet to make it durable and aesthetic.

6- Opening handles on the cover, locked with osculation, reinforced with resistance increasing profile from inside.

7- There are 4 carrying rollers, rotating 360º with a size of 150 x 45 ,tong sheet metal is 3 mm. Wheels are settled which are suitable to the standards of TS EN 12532. Thickness of connecting stand sheet metal of the wheel is 3 mm.

8- Container is produced in accordance with technical pictures and technical specialties, galvanized in accordance with the Standard of TS 914 EN ISO 1461 with the system of hot dipping galvanization 60-80 micron.

9- Container has the certificate TS EN 840-2.10- In the front side; the name of the Municipality, a drawing which shows a person throwing garbage and the slogan “Çevremizi Temiz Tutalım” (Keep our environment clean) are applied.

TECHNICAL PICTURE

500 LT. HOT DIP GALVANIZED WASTE CONTAINER TECHNICAL FEATURES

1 The body is twisted of 2 mm from one piece of sheet metal, resistance of the body and sides increased in presser. Side of the body curved 1,5

cm, the body is covered outside, ground corners and top back sides are radusted.2 The body mouth is covered with 25x50 mm.U profile.3 The hull is welded completely with komple gasous welding and without any dross.4 Lifting flanges are 4 mm and are welded to the body with reinforcement..At sides carrying handles are existed.5 Cover is reinforced and aesthetic by coating from 1,5 mm one piece of sheet metal.6 Opening handles on the cover, locked with osculation, reinforced with resistance increasing profile from inside.

7 Carrier with the size of 150 x 45 is suitable to the standards of TS EN 12532 and has 2 pieces of 360 movable and 2 pieces of stable wheels,which has 3 mm tong sheet metal. Wheels are settled which are suitable to the standards of TS EN 12532. Thickness of connecting stand sheet metal of the wheel is 3 mm.8 Container is produced in accordance with technical pictures and technical specialties, galvanized in accordance with the Standard of TS 914 EN ISO 1461 with the system of hot dipping galvanization 60-80 micron.9- Container has the certificate TS EN 840-2.

10- Municipality name, human figure who throws waste and Keep Environment Clean slogans could be applied on front side.

TECHNICAL PICTURE

770 LT. HOT DIP GALVANIZED WASTE CONTAINER TECHNICAL FEATURES

1 The body is twisted of 2 mm one piece of sheet metal, resistance of the body and sides increased in presser. Side of the body curved 1,5 cm, the body is covered outside, ground corners and top back sides are radusted.2 The body mouth is covered with 25x50 mm U profile.3 The body is welded completely with komple gasous welding and without any dross4 There are 45*10 cm lifting handles on the lifting apparats by drilling from 4 mm sheet metal, 16 mm round arms are welded to body from bottom and top..5 Cover is reinforced and aesthetic from 1,5 mm one piece of sheet metal by coating.

6 Opening handles on the cover, locked with osculation, reinforced with resistance increasing profile from inside.7 Carrier has 4 pieces wide tonged of 360 movable wheels with the size of 160 x 45 which has 4 mm tong sheet metal. Wheels are settled which are suitable to the standards of TS EN 12532. Thickness of connecting stand sheet metal of the wheel is 4 mm.8 Container is produced in accordance with technical pictures and technical specialties, galvanized in accordance with the Standard of TS 914 EN ISO 1461 with the system of hot dipping galvanization 60-80 micron.9-Container has the certificate TS EN 840-3.10-Municipality name, human figure who throws waste and Keep Environment Clean slogans could be applied on the front side.

TECHNICAL PICTURE

1,1 M3 HOT DIP GALVANIZED WASTE CONTAINER WITH DOME LID

TECHNICAL FEATURES 1- The body is made of 1.50 mm. sheet metal.

2- The cover is made of 1.40 mm. sheet metal.

3- The body and cover reinforced to increase the resistance.

4- The cover handles are 3.00 mm. steel sheet.

5- Movement of the cover with coil spring and has the stop mechanism on it.

6- There are rubber front of the cover.

7- Thickness of connecting stand sheet metal of the wheel is 4 mm.

8- Four carrier 360 °C rotary wheels at 200 x 50 size, 2 of which are with brakes and has 3 mm tong sheet metal. Wheels are settled which are suitable to the standards of TS EN 12532.. Thickness of connecting stand sheet metal of the wheel is 4 mm.

9-Container was galvanized according to TS EN 1461 after manufacrured.

10- The container has the corresponding certificate of conformity TS EN 840-3

TECHNICAL PICTURE

1,1 M3 HOT DIP GALVANIZED WASTE CONTAINERS WITH SEMI-DOME LID

TECHNICAL FEATURES 1- The body and the base are made of 1.50 mm sheet metal.

2-The base is manufacrured by a single piece of iron sheet as an conic and laminated by pressing and reinforcing.

3- There are forms for increasing the resistance on nears.

4- There are 30x40x3 mm. frame profile on the opening of the body.

5- The lifting handles are made suitable for DIN standard.

6- Four carrier 360 °C rotary wheels at 200x50 size, 2 of which are with brakes, with TS EN 12532 standard certificate of convenience. Thickness of connecting stand sheet metal of the wheel is 4 mm.

7-The lid is manufactured from a sing piece of iron sheet by being laminated on press and reinforcino as an shape the sides

being completely closed.

8- Welding is made completely with komple gaseous welding and without any dross.

9- Container was galvanized according to TS EN 1461 after completely manufacrured.

9- The container has the corresponding certificate of conformity TS EN 840-3.

TECHNICAL PICTURE

5.000 LT. CAPACITY UNDERGROUND WASTE CONTAINERTECHNICAL FEATURES

1-) The underground waste container is produced one piece and without adding.

2-) The underground waste container is made of high density polyethylene material. 3-) The external container volume of underground waste container is 5.000 liter (+-5%) and the

internal container volume is 4.000 liter (+-5%)and has a system with double unloading lids from the bottom.

4-) The underground waste container is completely impermeable to water and resistant to corrosion, atmospheric conditions and impacts. The container has conical shape and is unloaded by taking out from the top. The inside of the double lids on the bottom are used as the water container.

5-) The metal mechanisms related to the lifting, opening, closure and the joints of the internal body are resistant to the corrosion.

6-) The underground waste container can be unloaded by lifting with lifter and open the bottom lids by means of lifter and the bottom lids has the feature to close automatically after the unloading.

7-) One of the hooks carry the load and the other one opens-closes the bottom lids automatically. 8-) The underground waste container also has a litter lid for dropping waste on the top cover of the part

of the underground waste container to remain on the ground. 9-) The lid has the feature to be opened-closed easily using and has a handle on the top that can be

used by any of the users and can closed easily after dropping the waste. 10-) A digital printing can be applied on the part of the underground waste container which remains

over the ground optionally. 11-) The requested logo and writings are applied as sticker on the visible parts of the body and lid of

the underground waste container which remains over the ground.

TECHNICAL PICTURE

3.000 LT. CAPACITY UNDERGROUND WASTE CONTAINERTECHNICAL FEATURES

1-) The underground waste container is produced one piece and without adding. 2-) The underground waste container is made of high density polyethylene material. . 3-) The external container volume of underground litter container is 3.000 liter (+-5%) and the internal

container volume is 2,400 liter (+-5%)and has a system with double unloading lids from the bottom. 4-) The underground waste container is completely impermeable to water and resistant to corrosion,

atmospheric conditions and impacts. The container has conical shape and is unloaded by taking out from the top. The inside of the double lids on the bottom are used as the water container.

5-) The metal mechanisms related to the lifting, opening, closure and the joints of the internal body are resistant to the corrosion.

6-) The underground waste container can be unloaded by lifting with lifter and open the bottom lids by means of lifter and the bottom lids has the feature to close automatically after the unloading.

7-) One of the hooks carry the load and the other one opens-closes the bottom lids automatically. 8-) The underground waste container also has a litter lid for dropping waste on the top cover of the

part of the underground waste container to remain on the ground. 9-) The lid has the feature to be opened-closed easily using and has a handle on the top that can be

used by any of the users and can closed easily after dropping the waste. 10-) A digital printing can be applied on the part of the underground waste container which remains

over the ground optionally. 11-) The requested logo and writings are applied as sticker on the visible parts of the body and lid of

the underground waste container which remains over the ground.TECHNICAL PICTURE

STAINLESS STEEL DUSTBINTECHNICAL FEATURES 1 - The body and legs of the dustbin are made of 304 quality chromenickel steel and Joints were made with chrome-nickel weld.

1 Bucket size of the dustbin is 260x380x500 mm. And sheet metal thickness is 1.00 mm.2 Width of the dustbin feet are 110 mm, height 1000 mm, thickness of metal sheet 1.5 mm and

twisted shape U and width of U is 30 mm.4 – Dustbin connection between two legs has a base plate. Metal sheet twisted shape (U) is 90x460 mm, thickness is 1.50 mm.5 - The center of the upper part of the dutbin is shaped ashtray by press-spinning.6 –Dustbin is shaped as self-capped form by twisting 90*420 mm size ,1,5 mm thickness angled on the both side of the dustbin as no rain into.7 –Outer size of dustbinbin, including capp, is 260x460x1000 mm.8 - Municipality's name and slogan ‘keep clean our environment’ will be implemented the outer surface on the both side of dustbin.

TECHNICAL PICTURE

PARK TYPE DUSTBINTECHNICAL FEATURES 1 - Dustbin is made of 0.80 mm. sheet metal. 2 – Dustbin diameter is 280 mm. 3 – Dustbin height is 490 mm. 4 – Standing eliptic ashtray is available at the top of the dustbin. 5 – Feet are manufactured from 48 x 2 mm. pipe and it has a shape that can be mounted from four points on the ground 6 – Dustbins are painted with electrostatic polyester blended paint and are baked.7 - The Municipality name and ‘keep clean our environment’ were apllied on front surface of dustbin as an sticker. 8 – 4 pcs steel dowels are available for each dustbin .

TECHNICAL PICTURE