Tecsun PL 660 External Antenna
Click here to load reader
-
Upload
achillemario -
Category
Documents
-
view
80 -
download
14
description
Transcript of Tecsun PL 660 External Antenna
TECSUN PL-660
Modification for Ferritantenna and external LW/MW-Antenna Input
1. The Ferritantenna (Part 1: Change the ferritbar wire) At first you build out the ferritbar, but doe this very carfull ! Use a hair dryer to dissolve the glue, work very carfull !
Know you can install the ferritantenna in the housing.
2. The external antenna-connector for Long- and Mediumwave I use this mainboard-connectors:
And made this with two of them:
Drill two holes inside the back-housing of your PL-660:
Fix the connectors from inside with glue:
Connect the 10turns of 0.3mm copper wire with the 2 connectors, build an adapter to connect your external antenna:
Connect your external LW/MW antenna with the PL-660 and listen…