TECNO WASH Automatic Cleaaning Machineestanflux.es/images/stories/novedades/tecno-wash eng.pdf ·...
2
TECNO Automatic Clea Automatic Clea In order to guarantee the highest quality in screen requested after their use with solder pas With the continuous reduction of components si because the normal hand washing techniques do apertures. Obviously this must be done in the short TECNOLAB, thanks to its long experience in the pro and glues, has developed a machine TECNO‐WASH. ‐WASH aning Machine aning Machine printing process, the stencils automatic washing is ste or glue, to prevent harmful deposits. ze, an automatic process has become necessary not guarantee a good cleaning result inside the est possible time and at the lowest cost. oduction of laser stencils and sale of solder pastes e that meets all these requirements:
Transcript of TECNO WASH Automatic Cleaaning Machineestanflux.es/images/stories/novedades/tecno-wash eng.pdf ·...
TECNOAutomatic CleaAutomatic Clea
In order to guarantee the highest quality in screenrequested after their use with solder pasWith the continuous reduction of components sibecause the normal hand washing techniques doapertures.Obviously this must be done in the shortTECNOLAB, thanks to its long experience in the proand glues, has developed a machineTECNO‐WASH.
‐WASHaning Machineaning Machine
printing process, the stencils automatic washing isste or glue, to prevent harmful deposits.ze, an automatic process has become necessarynot guarantee a good cleaning result inside the
est possible time and at the lowest cost.oduction of laser stencils and sale of solder pastese that meets all these requirements:
DESCRIPTION and USE
TECNO‐WASH is an a new generation automaticwashing machine, completely made in all its partswith anticorrosive PCV.The machine is designed to optimize both energyand cleaner consumption. Operation is very simpleand intuitive.After turning on the machine you have to wait afew minutes until the cleaner comes tofew minutes until the cleaner comes totemperature. Then, after putting the stencil in themachine and choosing the most appropriateprogram, the machine is ready to work. With thenew software interface, all these operations arevery simple.Washing is divided into 4 steps:‐ PRE‐CLEANING ‐ CLEANING‐ FINAL CLEANING‐ DRYINGDuring the cleaning cycle, to increase the cleaningpower, air bubbles under high pressure are mixedwith cleaner This guarantees an optimal end resultwith cleaner. This guarantees an optimal end resultregardless of the stencil conditions and the paste orglue used.Drying is obtained by compressed air. This ensurean important energy saving compared to using hotair.
TECNICAL DATAS‐ Use only not flammable cleaners.‐ All parts are made of anticorrosive PVC.‐Wash tank with 2 spray arms.‐ Spray arms with high pressure nozzles (4/arm).‐ 3 filtering systems (settling tank and 2 filters of20 e 5 micron).‐ 9 customized wash programs.‐Monitoriing of cleaner level.‐ 25 liters cleaner.‐ Thermostatic bath tank.‐Maximun stencil size: 29”x29”.‐Machine size: 115cm x 50cm h 150cm.‐ Power consuption: 1,5 Kw.‐Weight: 65 Kg.
NEW SOFTWARE INTERFACE
