TECHNICAL SPECIFICATIONS - Platt Electric SupplyTECHNICAL SPECIFICATIONS FOR CUSTOM OPTIONS AND...

2
TECHNICAL SPECIFICATIONS FOR CUSTOM OPTIONS AND ACCESSORIES, CONTACT FACTORY. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. Catalog Number Type Date Prepared By Project Phone (800) 523-3602 • Fax (215) 831-7703 • www.simkar.com 04192013 DTDLED LED Dusk to Dawn HOUSING Rugged die-cast aluminum housing with powder coat gray finish. Cast heat dissipating fins. Internal slip fitter. ELECTRICAL Fully wired for 120V operation. Power factor >0.9. LEDS LM80 certified 50,000 hour operating life (L70). MOUNTING Standard 1-5/8" arm (included) or surface mount Simkar's LED Dusk-to-Dawn luminaires replace existing 70 watt pulse start metal halide fixtures while consuming just 30 watts and operating for 50,000 hours. The DTDLED is ideal for area, yard, security, and service road applications. LED LED Dimensions are nominal • Factory-installed photocell for automatic dusk to dawn operation • Energy efficient, high power LED array produces intense, uniform illumination • Consumes 30W; up to 50% energy savings vs HID • 4100K color temperature (typical) • Light output 1800 lumens (equivalent to 70W PSMH) • 50,000 hour operating life (L70) • Thermally efficient diecast aluminum housing maximizes life of LEDs • Durable, smooth gray powder-coat finish • UV stabilized prismatic acrylic lens • Wall or pole mount • Mounting arm and hardware included • UL/cUL wet location • Temperature range -22˚F (-30˚C) to 104˚F (40˚C) • 5 Year warranty • Fixture performance tested to LM79 LED Dusk to Dawn Yard Light Ordering Information Ordering Code Description DTDLED30 30W 120V LED 12” Yard Lite w/PC & 24” Arm 5” 7.5” 11” 12” MOUNTING ARM 1-5/8” dia. WET LOCATION LED Dusk to Dawn Performance DTDLED30 Input power 30 watts Light output* 1800 lumens Efficacy 60 lumens/watt *Delivered

Transcript of TECHNICAL SPECIFICATIONS - Platt Electric SupplyTECHNICAL SPECIFICATIONS FOR CUSTOM OPTIONS AND...

Page 1: TECHNICAL SPECIFICATIONS - Platt Electric SupplyTECHNICAL SPECIFICATIONS FOR CUSTOM OPTIONS AND ACCESSORIES, CONTACT FACTORY. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. Catalog

TECHNICAL SPECIFICATIONS

FOR CUSTOM OPTIONS AND ACCESSORIES, CONTACT FACTORY. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

Catalog Number

Type

Date

Prepared By

Project

Phone (800) 523-3602 • Fax (215) 831-7703 • www.simkar.com04192013

DTDLEDLED Dusk to Dawn

HOUSING Rugged die-cast aluminum housing with powder coat gray finish. Cast heat dissipating fins. Internal slip fitter.

ELECTRICAL Fully wired for 120V operation. Power factor >0.9.

LEDS LM80 certified 50,000 hour operating life (L70).

MOUNTING Standard 1-5/8" arm (included) or surface mount

Simkar's LED Dusk-to-Dawn luminaires replace existing 70 watt pulse start metal halide fixtures while consuming just 30 watts and operating for 50,000 hours. The DTDLED is ideal for area, yard, security, and service road applications.

INDUCTIONCFLHID LED

LEDFLUORESCENT

Dimensions are nominal

• Factory-installed photocell for automatic dusk to dawn operation

• Energy efficient, high power LED array produces intense, uniform illumination

• Consumes 30W; up to 50% energy savings vs HID

• 4100K color temperature (typical)

• Light output 1800 lumens (equivalent to 70W PSMH)

• 50,000 hour operating life (L70)

• Thermally efficient diecast aluminum housing maximizes life of LEDs

• Durable, smooth gray powder-coat finish

• UV stabilized prismatic acrylic lens

• Wall or pole mount

• Mounting arm and hardware included

• UL/cUL wet location

• Temperature range -22˚F (-30˚C) to 104˚F (40˚C)

• 5 Year warranty

• Fixture performance tested to LM79

LED Dusk to Dawn Yard Light Ordering Information

Ordering Code Description

DTDLED30 30W 120V LED 12” Yard Lite w/PC & 24” Arm

掀瞰

掀瞰 5”

7.5” 11”

12”

MOUNTING ARM 1-5/8” dia.

WET LOCATION

LED Dusk to Dawn Performance

DTDLED30Input power 30 watts

Light output* 1800 lumens

Efficacy 60 lumens/watt*Delivered

Page 2: TECHNICAL SPECIFICATIONS - Platt Electric SupplyTECHNICAL SPECIFICATIONS FOR CUSTOM OPTIONS AND ACCESSORIES, CONTACT FACTORY. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. Catalog

TECHNICAL SPECIFICATIONS

Phone (800) 523-3602 • Fax (215) 831-7703 • www.simkar.comFOR CUSTOM OPTIONS AND ACCESSORIES, CONTACT FACTORY. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

04192013

Photometric Data (2x2)

0.01

0.01

0.01

0.01

0.02

0.02

0.02

0.02

0.02

0.05

0.05

0.05

0.1

0.1

0.1

0.2

0.2

0.51

2

VALUES BASED ON 15.00 FOOT MOUNTING HEIGHT

0 1 2 3 4 5 6 7

-3

-2

-1

0

1

2

3

4

5

Tran

sver

se D

istan

ce in

Unit

s of M

ounti

ng H

eights

Longitudinal Distance in Units of Mounting Heights

stre

et s

ide

hous

e si

de

ISOFOOTCANDLE LINES OF HORIZONTAL ILLUMINATION

0 3030

6060

9090

120120

150150 180

LATERAL CONE THROUGH 2.5 DEGREES VERTICALVERTICAL PLANE THROUGH 180.0 DEGREES LATERAL

MAXIMUM PLANE AND CONE PLOTS OF CANDELA

HOUSE

SIDE

STREET

SIDE

220

440

660

FL

FM

BL

BM 60°60°

30°30°

BACK LIGHT FORWARD LIGHT

BVHUL

BH

UH UH

FVH

FH

UL

80°80°

100°100°

180°

90°90°

FRONTBACK

ZONE

LUMINAIRE

LUMENS

% OF

LUMINAIRE

LUMENS

FORWARD LIGHT 1053 56.5

FL ( 0°-30°) 208 11.2

FM (30°-60°) 428 23.0

FH (60°-80°) 366 19.7

FVH (80°-90°) 50 2.7

BACK LIGHT 777 41.7

BL ( 0°-30°) 194 10.4

BM (30°-60°) 330 17.7

BH (60°-80°) 214 11.5

BVH (80°-90°) 39 2.1

UPLIGHT 32 1.7

UL (90°-100°) 14 0.8

UH (100°-180°) 18 1.0

TRAPPED LIGHT NA NA

BUG (Backlight, Uplight, Glare) Rating

(Type V, Area Light)Quadrilateral Symmetrical Luminaire Types

FLUX

B1 U2 G1

B1 U2 G1

(Type I, II, III, IV)Asymmetrical Luminaire Types

FL

FM

BL

BM 60°60°

30°30°

BACK LIGHT FORWARD LIGHT

BVHUL

BH

UH UH

FVH

FH

UL

80°80°

100°100°

180°

90°90°

FRONTBACK

ZONE

LUMINAIRE

LUMENS

% OF

LUMINAIRE

LUMENS

FORWARD LIGHT 1053 56.5

FL ( 0°-30°) 208 11.2

FM (30°-60°) 428 23.0

FH (60°-80°) 366 19.7

FVH (80°-90°) 50 2.7

BACK LIGHT 777 41.7

BL ( 0°-30°) 194 10.4

BM (30°-60°) 330 17.7

BH (60°-80°) 214 11.5

BVH (80°-90°) 39 2.1

UPLIGHT 32 1.7

UL (90°-100°) 14 0.8

UH (100°-180°) 18 1.0

TRAPPED LIGHT NA NA

BUG (Backlight, Uplight, Glare) Rating

(Type V, Area Light)Quadrilateral Symmetrical Luminaire Types

FLUX

B1 U2 G1

B1 U2 G1

(Type I, II, III, IV)Asymmetrical Luminaire Types

FL

FM

BL

BM 60°60°

30°30°

BACK LIGHT FORWARD LIGHT

BVHUL

BH

UH UH

FVH

FH

UL

80°80°

100°100°

180°

90°90°

FRONTBACK

ZONE

LUMINAIRE

LUMENS

% OF

LUMINAIRE

LUMENS

FORWARD LIGHT 1053 56.5

FL ( 0°-30°) 208 11.2

FM (30°-60°) 428 23.0

FH (60°-80°) 366 19.7

FVH (80°-90°) 50 2.7

BACK LIGHT 777 41.7

BL ( 0°-30°) 194 10.4

BM (30°-60°) 330 17.7

BH (60°-80°) 214 11.5

BVH (80°-90°) 39 2.1

UPLIGHT 32 1.7

UL (90°-100°) 14 0.8

UH (100°-180°) 18 1.0

TRAPPED LIGHT NA NA

BUG (Backlight, Uplight, Glare) Rating

(Type V, Area Light)Quadrilateral Symmetrical Luminaire Types

FLUX

B1 U2 G1

B1 U2 G1

(Type I, II, III, IV)Asymmetrical Luminaire Types

Flux distribution based on IESNA Luminaire Classification System

Illustration depicts zone classification. See table below for fixture performance.