Technical specifications - smartrigcranes.com · DC powered winch meets CE/ASME.B30.5 standards...
5
Technical specifications Units come fully assembled DIMENSIONS Width Compact: 30 in. (762mm) Base Length Compact: 6 ſt. (1830mm) Max Hook Height: 20 ſt. 3 in. (6.1m) WEIGHT 1,800 lbs. (816 kg) 1,500 lbs. (680 kg) with yellow plates removed. (6) fiſty lb. removable back yellow plates = 300 lbs: (136kg) (Remove plates for transport only. Must be on machine to use.) FEATURES Fits in 36 in. doorways & elevators Max load capacity: 2,000 lbs. / 905 kg 24v deep cycle battery power Weatherproof on-board charger 4 piece boom w/ wear strips & dual stop points. 100 ſt. (30m) steel cable. Wire diameter: 5/16 in / 7.9mm DC powered winch meets CE/ASME.B30.5 standards Hydraulic jack w/ controls Speed: 30 FPM (9m/minute) Wheels: polyurethane on iron (won’t scuff interior floors) Spring loaded support casters Pick & Carry Design (smooth, easy to move loads) Steering: rear wheels connected to handle bar w/ rubber grips Magnetic degree finder/load decal. Powder coated protection (safety green & safety yellow) Rooſtop liſting (up to 7 stories) Test certificate SAFETY Rated 150% (1.5 safety factor) Limit switch (anti-two-block) Brake on steer wheels Brakes on outrigger wheels Brake on winch Dual safety stops on boom sections Winch shield Safety check valve Block & tackle 4:1 rated hook w/ safety latch WARRANTY Two year warranty M1 MODEL CE certified. Meets OSHA, ASME, PALD standards. No operator license required 10000 NE 7th Ave Ste 330-A Vancouver, WA 98685. Phone: (360) 768-5104 Fax: (360) 326-7228 Email: [email protected] Web: www.microcranes.com
Transcript of Technical specifications - smartrigcranes.com · DC powered winch meets CE/ASME.B30.5 standards...
Technical specificationsUnits come fully assembled
DIMENSIONSWidth Compact: 30 in. (762mm)Base Length Compact: 6 ft. (1830mm)Max Hook Height: 20 ft. 3 in. (6.1m)
WEIGHT1,800 lbs. (816 kg)1,500 lbs. (680 kg) with yellow plates removed.(6) fifty lb. removable back yellow plates = 300 lbs: (136kg)(Remove plates for transport only. Must be on machine to use.)
FEATURESFits in 36 in. doorways & elevatorsMax load capacity: 2,000 lbs. / 905 kg24v deep cycle battery powerWeatherproof on-board charger4 piece boom w/ wear strips & dual stop points.100 ft. (30m) steel cable. Wire diameter: 5/16 in / 7.9mmDC powered winch meets CE/ASME.B30.5 standardsHydraulic jack w/ controlsSpeed: 30 FPM (9m/minute)Wheels: polyurethane on iron (won’t scuff interior floors)Spring loaded support castersPick & Carry Design (smooth, easy to move loads)Steering: rear wheels connected to handle bar w/ rubber gripsMagnetic degree finder/load decal.Powder coated protection (safety green & safety yellow)Rooftop lifting (up to 7 stories)Test certificate
SAFETYRated 150% (1.5 safety factor)Limit switch (anti-two-block)Brake on steer wheelsBrakes on outrigger wheelsBrake on winchDual safety stops on boom sectionsWinch shieldSafety check valveBlock & tackle4:1 rated hook w/ safety latch
WARRANTYTwo year warranty
M1 MODELCE certified. Meets OSHA, ASME, PALD standards.
No operator license required
10000 NE 7th Ave Ste 330-A Vancouver, WA 98685. Phone: (360) 768-5104 Fax: (360) 326-7228Email: [email protected] Web: www.microcranes.com
65º
45º
30º
55º
15º
2,00
0 lb
s.(9
05kg
)
7FT
6FT
6FT
3FT
1,76
5 lb
s.(8
00kg
)
1,00
0 lb
s.(4
50kg
)
1,600
lbs.
(725k
g)
1,400
lbs.
(635k
g)
600 l
bs.
(270k
g)
1,200 lbs.
(545kg)
800 lbs.
(360kg)
0 2-2-4FTM 0 1-1 2 3 4 5 6 7
4 6 8 10 12 14 16 18 22
0
2
4
6
8
10
12
14
16
18
20
22
0
1
2
3
4
5
6
7FT M
1,35
0 lb
s.(6
15kg
)
750 lbs.
(340kg)
400 lbs.
(180kg)
1,35
0 lb
s.(6
15kg
)
750 lbs.
(340kg)
1,800
lbs.
(816
kg)
1,600
lbs.
(725
kg)
1000
lbs.
(450
kg)
800 l
bs.
(360
kg)
1,400 lbs.
(635kg)
1,200 lbs.
(545kg)
600 lbs.
(270kg)
400 lbs.
(180kg)
400 lbs.
(180kg)
200 lbs.
(90kg) 200 lbs.
(90kg)
(-2′)
Load Bearing (Outriggers: 450)
10000 NE 7th Ave Ste 330-A Vancouver, WA 98685. Phone: (360) 768-5104 Fax: (360) 326-7228Email: [email protected] Web: www.microcranes.com
M1 MODELCE certified. Meets OSHA, ASME, PALD standards.
No operator license required
Reduce weight by 50% when weights pulled back only -2 ft.
Load Bearing (Outriggers: 150)
Boom posit ion #1 and #2 only.
65º
45º
30º
55º
15º
1,250
lbs.
(565k
g)
1,250
lbs.
(565k
g)
1.100 lbs.
(498kg)
1,000 lbs.
(450kg)
1,300
lbs.
(590
kg)
1,300
lbs.
(590
kg)
1,50
0 lb
s.(6
80kg
)
1,32
5 lb
s.(6
00kg
)
900 lbs.
(410kg)
750 lbs.
(350kg)
0
2
4
6
8
10
12
14
16
18
20
22
0
1
2
3
4
5
6
7FT M
0 2-2-4FTM 0 1-1 2 3 4 5 6 7
4 6 8 10 12 14 16 18 22
7FT
6FT
10000 NE 7th Ave Ste 330-A Vancouver, WA 98685. Phone: (360) 768-5104 Fax: (360) 326-7228Email: [email protected] Web: www.microcranes.com
M1 MODELCE certified. Meets OSHA, ASME, PALD standards.
No operator license required
Only for use with weights pulled back 4 ft./full extension
10000 NE 7th Ave Ste 330-A Vancouver, WA 98685. Phone: (360) 768-5104 Fax: (360) 326-7228Email: [email protected] Web: www.microcranes.com
M1 MODELCE certified. Meets OSHA, ASME, PALD standards.
No operator license required
Footprint Dimensions (mm)
Counterweights
762mm
1,220mm
1,830mm
3,048mm
1,016mm
2,438mmTOP
1,955mm
3,733mm
15˚ 15˚
45˚ 45˚
10000 NE 7th Ave Ste 330-A Vancouver, WA 98685. Phone: (360) 768-5104 Fax: (360) 326-7228Email: [email protected] Web: www.microcranes.com
M1 MODELCE certified. Meets OSHA, ASME, PALD standards.
No operator license required
Footprint Dimensions (inch)
Counterweights
30”
48”
72”
120”
40”
96”TOP
77”
147”
15˚ 15˚
45˚ 45˚
