Technical specification of the Mobile sampling unit
description
Transcript of Technical specification of the Mobile sampling unit
Sampling pressure 6-7 bar
Total volume of sample 1-16 m3
Max productivity 32 m3/day
Sampling time 1 h up to continuous sampling (12 h samples)
Maximum weight of a module in sampling unit
62 kg
Total weight of sampling unit About 350 kg
Dimensions of sampling unit (width × depth ×height)
165 ×73× 130 cm
Manual interaction Transport of sample columns to Base Camp. Change of carrier gas bottles (He). Start and stop of samplings and base camp measurements.
Power consumption of sampling unit 2 kW mean, 4.5 kW peak
Carrier gas consumption of sampling unit 0.25 m3 per day
Sample transfer columns (in mobile sampling unit)
Four
Set up time of the mobile sampling unit About 20 min
Technical specification of the Mobile sampling unit
Sampling pressure 6-7 bar
Total volume of sample 1-16 m3
Max productivity 32 m3/day
Sampling time 1 h up to continuous sampling (12 h samples)
Concentration/separation time* 6 h
Measurement time* Variable. Produces IMS 2.0 data files
Maximum weight of a module in sampling unit
62 kg
Total weight of sampling unit About 350 kg
Total weight of processing unit* About 200 kg
Total weight of detector units (2 lead shields+ detectors)*
900 kg
Dimensions of sampling unit (width × depth ×height)
165 ×73× 130 cm
Dimensions of processing/measurement units unit (width × depth ×height)*
220 × 120 × 210 cm
Manual interaction Transport of sample columns to Base Camp. Change of carrier gas bottles (He). Start and stop of samplings and base camp measurements.
Isotopes measured* 131mXe, 133mXe, 133Xe,135Xe
Counting system* Beta-gamma coincidence
MDC* Nominal value 0.3 mBq/m3 for 133Xe, based on 16m3 atmospheric sample and 11 h measurement time.
Power consumption of sampling unit 2 kW mean, 4.5 kW peak
Carrier gas consumption of sampling unit 0.25 m3 per day
Carrier gas consumption of processing unit* 0.1 m3/day
Sample transfer columns (in mobile sampling unit)
Four
Archive bottles (in base camp)* Three, one used at a time
Set up time of the mobile sampling unit About 20 min
Technical specification of the Mobile Sampling Unit in combinationwith processing and analysis in base camp.
* System characteristic of base camp marked in red.