TECHNICAL PRoGRAM Ⅳ -...
Transcript of TECHNICAL PRoGRAM Ⅳ -...
7
August 28 ~ September 1, 2011/ The Shilla Jeju, Jeju, Korea
SINTERING 2011Meeting Guide & Abstracts
TECHNICAL PRoGRAM Ⅳ
2. Plenary Sessions
Plenary Talk 1
[Pl1-1] Prof. Randall German (San Diego State Univ., USA)
Paper Title History of Sintering
Date August 29 (Monday), 2011
Time 08:50~09:30
Room Halla Hall (5F)
Session Chair Prof. Eugene Olevsky (San Diego State Univ., USA)
Abstract
As the body of sintering literature grows, we need to step back occasionally to gain context for the current thinking to realize that
often concepts we now accept were initially quite controversial. Even the definition of sintering remains a subject of debate. This
presentation will review mostly sintering theory, but will weave in much of the earlier sintering practice developments, to give an
overview of how the field developed. Who did what, when, why, where, and for what reason Some of these issues are lost and are only
available via archeological findings. From a technical standpoint, tungsten, porcelain, iron-copper-carbon, tungsten carbide cemented
with cobalt, and bronze drove much of the early sintering practice. Indeed many commercial materials were evident prior to the first
phenomenological sintering theory. Subsequent diffusion models for sintering were highly controversial, simply because atomic models
for diffusion were not accepted. Then too we had a cast of characters that delighted audiences at early sintering conferences - so some
mention is needed on the personalities. Finally, comments will be given on the evolution of contemporary topics such as computer
simulations, microwave heating, rapid firing, and new materials. Unfortunately, most of these started many years earlier than current
researchers want to admit. A time-based map emerges for various lines of thinking and analysis.
I n t e r n a t i o n a l C o n f e r e n c e o n S i n t e r i n g 2 0 1 1
8
Ⅳ TECHNICAL PRoGRAM
2. Plenary Sessions
Plenary Talk 2
[Pl1-2] Prof. Veena Tikare (Sandia Nat’l Laboratories, USA)
Paper Title On Sintering Stress in Complex Powder Compacts
Date August 29 (Monday), 2011
Time 09:30~10:10
Room Halla Hall (5F)
Session Chair Prof. Didier Bouvard (Grenoble INP, France)
Abstract
Sintering stress is one of the most fundamental descriptors of a sintering powder compact. It is the mechanical analog of driving force
for sintering and is due to the curved interfaces present in a powder compact. However characterization of this quantity for realistic
powder compacts has remained elusive. It is difficult to measure experimentally, requiring instantaneous zero-strain creep experiments
at different densities during sintering1. Analytic derivations of sintering stress are limited to simple geometries with regular-shaped
particles and pores that are repeating in space. Even numerical simulations are limited to small, simple geometries2 as simulations of
microstructural evolution during sintering are just emerging. We examine sintering stress of complex powder compacts using the Potts
kinetic Monte Carlo, kMC, model. The kMC sintering model simulates detailed microstructural evolution of a compact during sintering3.
The model is able to simulate all the physical phenomena necessary to simulate simple solid state sintering. These mechanisms are
creation, diffusion and annihilation of vacancies to give densification, coarsening of grains by curvature driven grain growth that is
simultaneously pinned by porosity and coarsening of porosity by surface diffusion. The simulations are sufficiently large, consisting of
hundreds and even thousands of powder particles, and have sufficient morphological detail to enable characterization of interface
curvatures and hence the sinter stress of a complex powder compact. We will present the model, its simulation results, characterization
of interface curvatures, and sintering stress calculated from the simulation. The results obtained from the simulations will be compared
to experimental data to obtain an understanding of sintering stress in real powder compacts during sintering.
Sandia Nat’l Laboratories is operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S.
DOE NNSA contract DE-AC04-94AL85000
[1] R.A. Gregg and F.N. Rhines, Met. Trans., 4 (1973) 1365-1374.
[2] F. Wakai and Y. Shinoda, Acta Materialia, 57 (2009) 3955-3964
[3] V. Tikare, M. Braginsky, D. Bouvard and A. Vagnon, Comp. Mater. Sci., 48 (2010) 317-325.
9
August 28 ~ September 1, 2011/ The Shilla Jeju, Jeju, Korea
SINTERING 2011Meeting Guide & Abstracts
TECHNICAL PRoGRAM Ⅳ
2. Plenary Sessions
Plenary Talk 3
[Pl2-1] Prof. Umberto Anselmi-Tamburini (Univ. of Pavia, Italy)
Paper Title Field Assisted Sintering of Nanometric Ceramic Materials
Date August 30 (Tuesday), 2011
Time 08:30~09:10
Room Lotus Hall (3F)
Session Chair Prof. Eugene Olevsky (San Diego State Univ., USA)
Abstract
The interest towards ceramic materials with the grain size in the nanometric range has grown dramatically in the last two decades. This
is due to the increasing attention towards the unusual physical and chemical properties that nanocrystalline materials present; properties
that offer a huge potential for several relevant technological applications. Although the limit for the nanometric range has been placed,
somehow arbitrarily, around 100 nm, the influence of the nanostructure on the physical properties of ceramic materials is expected to
become particularly evident for a grain size around or below 10-20 nm. While the synthesis of powders and thin film with grain size in
this range has been successfully demonstrated, the goal of synthesizing bulk, fully dense materials with grain sizes in this range remained,
until recently, largely unachieved. The production of bulk nanometric ceramic materials represents in fact a huge challenge for traditional
sintering techniques. Pressureless sintering and hot pressing involve very long heating cycles and are usually associated with significant
grain growth. This limitation hampered the application of nanostructured materials in fields where the materials must be in bulk form,
and limited the scientific understanding of phenomena involving bulk materials. This limitation has been partially overcome in the last
few years thanks to the application of the sintering techniques usually known as Field Assisted Sintering (FAST) or Spark Plasma Sintering
(SPS). These techniques present an attractive combination of short sintering cycles and low sintering temperatures. They allow, in fact,
to achieve very high heating rates, up to 500°C/min, and typically involve sintering cycles limited to few minutes, reducing drastically
the grain growth. Using this approach the production of simple and complex oxides with relative density above 98% and grain size as
small as 15nm have been already demonstrated, even starting with badly agglomerated nano-powders. The general characteristics of
the technique will be presented together with some example of applications to the synthesis of bulk functional ceramic oxides.
I n t e r n a t i o n a l C o n f e r e n c e o n S i n t e r i n g 2 0 1 1
10
Ⅳ TECHNICAL PRoGRAM
2. Plenary Sessions
Plenary Talk 4
[Pl2-2] Prof. Jai-Sung Lee (Hanyang Univ., Korea)
Paper Title Nano Powder and Nanostructured Materials in Powder Metallurgy
Date August 30 (Tuesday), 2011
Time 09:10~09:50
Room Lotus Hall (3F)
Session Chair Prof. Suk-Joong L. Kang (KAIST, Korea)
Abstract
Different concepts illustrate how to transform discoveries into inventions and sometimes, finally into innovations. Nanotechnology is
one of the most innovative fields in science and industry worldwide. The application of nanotechnology to powder metallurgy (PM)
brings such an innovation opening up new material and component industry and markets. PM approaches can be used to produce
nanostructures either by processing a nano-sized powder into porous or dense materials or by refining the microstructure in high energy
milling of coarser powders.
The first example reports about processing metal nano powders synthesized via various technologies combined with advanced industrial
applications such as hard coatings, catalysts, energy materials for battery and fuel cell electrode, printed electronics, magnetic material
and etc. The second example illustrates processes for the nanoporous and dense PM components, and parts using metal nano powders.
This enables the conventional PM parts with hitherto unrivaled material properties and new applications opening up markets that were
new for powder metallurgy industry. Especially, net-shaping processes, such as micro powder injection molding and rapid prototyping,
are becoming increasingly important for the micro-components that are increasingly needed in advanced PM parts in electronic-,
medical- and chemical applications.
Seeking cost-effective and environment-friendly routes for processing PM nanomaterials is becoming increasingly important. Recent
studies on optimal design and processing of nano powder agglomerates into net-shaped micro PM components are based upon
understanding the role of powder interfaces for nano-agglomerate sintering. Through optimal design of those hierarchical interfaces
such as inter- and intra-agglomerate boundaries, a full density nano powder materials can be achieved only by pressureless sintering.
To meet these technological challenges, we finally demonstrate how the rigorous combination of well-known PM technologies opened
up new applications.
11
August 28 ~ September 1, 2011/ The Shilla Jeju, Jeju, Korea
SINTERING 2011Meeting Guide & Abstracts
TECHNICAL PRoGRAM Ⅳ
August 29, 2011 (Mon.)3. Technical Program
Room A (Lotus Hall 1) Room B (Lotus Hall 2) Room C (Lotus Hall 3)
[MoC1] 10:30~12:10 p36
Electroceramics ⅠSession Chairs : Prof. Jong-Heun Lee (Korea Univ., Korea)Prof. Vojislav Mitic (Univ. of Nis, Serbia)
MoC1-1 10:30~11:00
[Invited] Synthesis and Size Control of Tetragonal BaTiO3 Nano-powders by Facile Solvothermal Method
Hyun-Wook Lee, San Moon (KAIST, Korea), Chang-Hak Choi (Samsung Electro-Mechanics, Korea), and Do Kyung Kim (KAIST, Korea)
MoC1-2 11:00~11:20
Sintering Proces Influence on Microstructure and Intergranular Impedance of Rare-Earth Modified BATIO3-Ceramics
V. V. Mitic, V. Paunovic (Univ. of Nis, Serbia), V. Pavlovic (Seribian Academy of Sciences and Arts, Serbia), J. Purenovic, and Lj. Zivkovic (Univ. of Nis, Serbia)
MoC1-3 11:20~11:40
Effect of Divalent Cation Doping on Sinterability of Polycrystalline Yttria
Hidehiro Yoshida (NIMS, Japan), Masayasu Kodo, Kohei Soga (Tokyo Univ. of Science, Japan), and Takahisa Yamamoto (The Univ. of Tokyo, Japan)
MoC1-4 11:40~12:10
[Invited] Low-temperature Sintering and Electrical Properties of Strontium- and Magnesium-doped Lanthanum Gallate
Sang Bu Ha, Yoon Ho Cho (Korea Univ., Korea), Ho-Il Ji, Jong-Ho Lee (KIST, Korea), Yun Chan Kang (Konkuk Univ., Korea), and Jong-Heun Lee (Korea Univ., Korea)
[MoB1] 10:30~12:10 p34
Multimaterials/Layered Materials ⅠSession Chairs : Prof. Vikram Jayaram (Indian Inst. of Science, India)Dr. Jean-Marc Chaix (Grenoble INP, France)
MoB1-1 10:30~11:00
[Invited] A Comparative Study of the Role of Non-stoichiometry and Transient Liquid Phase in Reactive Densification of Refractory Compounds in the (Ti,Zr)-(B4C,BN,C) Systems
V. Jayaram (Indian Inst. of Science, India)
MoB1-2 11:00~11:20
The Effect of SiC Size on the Microstructures and Physical Properties of ZrB2-SiC Ceramics
Seongwon Kim, Jung-Min Chae, Sung-Min Lee, Yoon-Suk Oh, Hyung-Tae Kim (KICET, Korea), and Sahn Nahm (Korea Univ., Korea)
MoB1-3 11:20~11:50
[Invited] On Chemical Interactions in the Interface Region during Sintering of Multi-materials
Jean-Marc Chaix (Grenoble INP, France)
MoB1-4 11:50~12:10
Characterization Investigations of Mech-anically Alloyed and Sintered Al Matrix Composites Reinforced with Nano-ZrC and La2O3 Particles
Duygu Ağaoğulları, Hasan Gökçe, İsmail Duman, and M. Lütfi Öveçoğlu (Istanbul Technical Univ., Turkey)
[MoA1] 10:30~12:10 p33
Sintering Models and AnalysisSession Chairs : Prof. Bernd Kieback (IFAM, Germany)Prof. Junichi Tatami (Yokohama Nat’l Univ., Japan)
MoA1-1 10:30~11:00
[Invited] Stereological Analysis of Micros-tructural Evolution during Sintering
Burton R. Patterson (Univ. of Florida, USA)
MoA1-2 11:00~11:30
[Invited] Analysis of Particle Rolling and Intrinsic Rotations in Copper Powder during Sintering
B. Kieback, M. Noethe (TU Dresden, Germany), R. Grupp (Univ. of Auckland, New Zealand), J. Banhart (Helmholtz Centre for Materials and Energy Berlin, Germany), T. Rasp, and T. Kraft (Fraunhofer Inst. for Mechanics of Materials, Germany)
MoA1-3 11:30~11:50
Diffusive Model of Pore Shrinkage in Final-Stage Sintering
Byung-Nam Kim, Keijiro Hiraga, Koji Morita, Hidehiro Yoshida, and Haibin Zhang (NIMS, Japan)
MoA1-4 11:50~12:10
Analysis of Sintering Behavior of Si3N4 by Master Sintering Curve Theory for Liquid Phase Sintering
Junichi Tatami, Daisuke Hiratsuka, Katsutoshi Komeya, Toru Wakihara, and Takeshi Meguro (Yokohama Nat’l Univ., Japan)
I n t e r n a t i o n a l C o n f e r e n c e o n S i n t e r i n g 2 0 1 1
12
Ⅳ TECHNICAL PRoGRAM
August 29, 2011 (Mon.)3. Technical Program
Room A (Lotus Hall 1) Room B (Lotus Hall 2) Room C (Lotus Hall 3)
[MoC2] 13:30~15:00 p41
Observation and AnalysisSession Chairs : Prof. Hui Gu (Chinese Academy of Sciences, China)Prof. Sebastien Vaucher (EMPA, Switzerland)
MoC2-1 13:30~13:50
AEM Study on the Textured Strontium Barium Niobate Ceramics
Hui Gu (Chinese Academy of Sciences, China)
MoC2-2 13:50~14:20
[Invited] In-situ Analytics for Real Time Observation of Materials under Microwave Processing
Vaucher S., Ishizaki K, Stir M (Swiss Federal Lab. for Materials Science and Tech., Switzerland), Catala-Civera J. M. (Universidad Politecnica de Valencia, Spain), and Nicular R. (Swiss Federal Lab. for Materials Science and Tech., Switzerland)
MoC2-3 14:20~14:40
The Microwave Route to Iron and Steel: First Results from in Situ Time-resolved Experiments using Synchrotron Radiation
K. Ishizaki, M Stir (Swiss Federal Lab. for Materials Science and Tech., Switzerland), F. Gozzo (Paul Scherrer Inst., Switzerland), J.-M Catala-Civera (Universidad Politecnica de Valencia, Spain), S. Vaucher, and R. Nicula(Swiss Federal Lab. for Materials Science and Tech., Switzerland)
[MoB2] 13:30~15:30 p39
Multimaterials/Layered Materials ⅡSession Chairs : Prof. Jingzhe Pan (Univ. of Leicester, UK)Prof. François Valdivieso (ENSM.SE, France)
MoB2-1 13:30~14:00
[Invited] Discrete Element Simulation of Sintering: toward More Realistic Micro-structures
Xiaoxing Liu, Zilin Yan, and Christophe Martin (Grenoble INP, France)
MoB2-2 14:00~14:20
Defect Instability during Constrained Sintering of Thin Films
Jingzhe Pan, Fan Li, and Ruoyu Huang (Univ. of Leicester, UK)
MoB2-3 14:20~14:50
[Invited] Multi-materials Cer/Cer and Cer/Met: Reflexions on Assembly by Powder Metallurgy
Valdivieso François, Saunier Sébastien, Auger Jean-Marc, and Desplanques Benjamin (ENSMSE, France)
MoB2-4 14:50~15:10
The Effect of Fast Heating on the Microstructure of Multilayer Ceramic Capacitor (MLCC)
Byung-Kwon Yoon, Chul-Seung Lee, and Sang Hoon Kwon (Samsung Electro-Mechanics, Korea)
[MoA2] 13:30~15:20 p37
Sintering Behavior - Ceramic ⅠSession Chairs : Prof. Keizo Uematsu (Nagaoka Univ. of Technology, Japan)Dr. Vincenzo Esposito (Risoe DTU, Denmark)
MoA2-1 13:30~14:00
[Invited] Sintering Governing Particle Characteristics in the Synthesis of Strontium Sodium Niobate by Solid State Reaction
Emi Yaegaki, Satoshi Tanaka, and Keizo Uematsu (Nagaoka Univ. of Tech., Japan)
MoA2-2 14:00~14:20
Impact of Phase Transitions on the Sinterability and Evolution of the Thermophysical Properties of Gadolinia
J. B. Henderson (Netzsch Instruments, USA)
MoA2-3 14:20~14:40
Sintering and Microstructure Develo-pment of Ce0.9Gd0.1O2-δ: the Effect of Pore Arrangement in the Green Body
Julie A. Glasscock, Vincenzo Esposito, Søren P. V. Foghmoes, Tobias Stegk, David Matuschek, Mikkel W. H. Ley, and Severine Ramousse(Technical Univ. of Denmark, Denmark)
MoA2-4 14:40~15:00
Densification and Strength of Porous Y-TZP Ceramics with a Bimodal Particle Size Distribution
S. Perko, A. Dakskobler, and T. Kosmac (Jozef Stefan Inst., Slovenia)
13
August 28 ~ September 1, 2011/ The Shilla Jeju, Jeju, Korea
SINTERING 2011Meeting Guide & Abstracts
TECHNICAL PRoGRAM Ⅳ
August 29, 2011 (Mon.)3. Technical Program
Room A (Lotus Hall 1) Room B (Lotus Hall 2) Room C (Lotus Hall 3)MoB2-5 15:10~15:30
Effect of Interaction between unlike Material on the Sintering of Composites
D. Furuta and T. Kimura (Keio Univ., Japan)
MoA2-5 15:00~15:20
Effects of Powder Morphology and Additives on the Sintering Behavior of Hydroxyapatite Ceramics
Yong Liu, Jiangfeng Song, and Ying Zhang (Central South Univ., China)
MoC2-4 14:40~15:00
Direct Observation of Ceramic Sintering at the Grain Scale using High Temperature – Environmental Scanning Electron Microscopy (HT-ESEM) (T ≥ 1000°C)
R. Podor, N. Clavier, J. Ravaux, L. Claparède, and N. Dacheux (ICSM/LIME, France )
I n t e r n a t i o n a l C o n f e r e n c e o n S i n t e r i n g 2 0 1 1
14
Ⅳ TECHNICAL PRoGRAM
August 29, 2011 (Mon.)3. Technical Program
Room A (Lotus Hall 1) Room B (Lotus Hall 2) Room C (Lotus Hall 3)
[MoC3] 17:10~18:10 p45
Layered Materials/Inkjet Printed MaterialsSession Chairs : Prof. Do Kyung Kim (KAIST, Korea)Prof. Caroline Sunyong Lee (Hanyang Univ., Korea)
MoC3-1 17:10~17:30
Experimental and Numerical Analysis of the Co-sintering of Bimaterial Parts
G. Largiller, D. Bouvard, C. P. Carry (Grenoble INP, France), A. Gabriel (Rio Tinto Alcan, France), and T. Staab (Fraunhofer ISC, Germany)
MoC3-2 17:30~17:50
Optimal Sintering Technologies Applied to Inkjet-printed Silver Nanoparticles for Microelectronics Applications
R. Cauchois (Innovation & Manufacturing Tech., France), M. Saadaoui, K. Inal (EMSE, France), B. Dubois-Bonvalot, and J.-C. Fidalgo (Innovation & Manufacturing Tech., France)
MoC3-3 17:50~18:10
Study of Sintering Behavior of Ink-Jet Printed Copper Pattern using 1-Octanethiol Coated Copper Nanoparticles by Vapor Forms
Shinyoung Park, Jinhyeong Kwon, Jeahak Her, Md. Mominul Haque (Hanyang Univ., Korea), Youngseok Kim (Korea Electronics Tech. Inst., Korea), and Caroline sunyong Lee (Hanyang Univ. Korea)
[MoB3] 17:10~18:30 p44
Modeling ⅠSession Chairs : Prof. Seong Jin Park (POSTECH, Korea)Dr. Andrey Maximenko (Inst. for Problems of Materials Science, Ukraine)
MoB3-1 17:10~17:40
[Invited] Modeling and Simulation for Sintering Process
Seong Jin Park (POSTECH, Korea), Suk-Hwan Chung (Hyundai Steel, Korea), Young-SamKwon, Seong-Teak Chung (CetaTech, Korea), Seong-Gon Kim (Mississippi State Univ., USA), and Randall German (San Diego State Univ., USA)
MoB3-2 17:40~18:10
[Invited] Direct Multiscale Modeling of Sintering
Andrey Maximenko and Andrey Kuzmov (Inst.for Problems of Materials Science, Ukraine)
MoB3-3 18:10~18:30
Molecular Dynamics Simulation of the Sintering Process for Nanoscale Copper Powders
Seongwon Hwang (POSTECH, Korea), Sungho Kim, Seong-Gon Kim (Mississippi State Univ., USA), S. Woo Lee and Seong Jin Park (POSTECH, Korea)
[MoA3] 17:10~18:20 p43
Sintering Behavior - Metals ⅠSession Chairs : Prof. Yang Rui (Chinese Academy of Sciences, China)Prof. Jai-Sung Lee (Hanyang Univ., Korea)
MoA3-1 17:10~17:30
Effects of Particle Size on the Sintering Behavior of Titanium Alloy
Chi Yeon Kim (POSTECH, Korea), Young-Sam Kwon (CetaTech, Korea), S. Woo Lee and Seong Jin Park (POSTECH, Korea)
MoA3-2 17:30~17:50
Processing Windows and Properties of Y-Tial Sheet From Atomized Powder
L. Xu, C. G. Bai, G. Wang, Y. Y. Cui, R. Yang (Chinese Academy of Sciences, China)
MoA3-3 17:50~18:20
[Invited] Densification and Nanocrysta-llization of Metallic Powders in Cold Sintering using High Pressure Torsion
Eun Yoo Yoon, Dong Joon Lee (POSTECH, Korea), Taek Soo Kim (KITECH, Korea) and Hyoung Seop Kim (POSTECH, Korea)
15
August 28 ~ September 1, 2011/ The Shilla Jeju, Jeju, Korea
SINTERING 2011Meeting Guide & Abstracts
TECHNICAL PRoGRAM Ⅳ
August 29, 2011 (Mon.)3. Technical Program
Lotus Hall Lobby + Lily MoP14
The Effect of Stress on Grain Growth of Submicron Sized Zirconia Porous Compact
Jie Lu and Jan Ma (Nanyang Technological Univ., Singapore)
MoP15
Co-Firing of (Bi,Na,K)TiO3/AgPd Multilayer Ceramic Actuators using Microwave Sintering
Van-Quyet Nguyen, Han-Bok Lee, Hyung-Su Han, Jin-Kyu Kang (Univ. of Ulsan, Korea), and Weon-Pil Tai (Ulsan Fine Chemical Industry Center, Korea)
MoP16
Sintering of Recycled Tungsten Carbide Obtained by Waste Hard Metal for Zinc Decomposition Process
J.-H. Pee, W. J. Lee, W. S. Cho, K. J. Kim (KICET, Korea), and N. E. Seong (Recytech Korea Co., Ltd., Korea)
MoP19
Liquid Migration and Sintering of Functionally Graded Cemented Tungsten Carbide
Z. Zak Fang, Peng Fan, Jun Guo, Xu Wang, and Kyu Sup Hwang (Univ. of Utah, USA)
MoP20
Composites WC-Co/cBN Produced by Pulse Plasma Sintering Method
Marcin Rosiński, Andrzej Michalski, and Jerzy Szawłowski (Warsaw Univ. of Tech., Poland)
MoP21
Fabrication of Crack-free Ni/Al2O3 FGM through Controlling Shrinkage Rate among Layers
Seungkyu Yang, Hyungsub Kim, and Caroline Sunyong Lee (Hanyang Univ., Korea)
MoP07
Effect of Sintering Conditions on Alumina Honeycomb Body with Different Binder Systems
Charusporn Mongkolkachit and Suda Wanakitti (Nat’l Metal and Materials Tech. Center, Thailand)
MoP08
Anisotropic Microstructure and Sintering Shrinkage of Crystal Oriented Alumina Ceramics Prepared by Colloidal Processing in a Magnetic Field
Satoshi Tanaka, Ryoichi Furushima, and Keizo Uematsu (Nagaoka Univ., Japan)
MoP09
Synthesis of Polycrystalline Sr2Fe1+xMo1-xO6 Samples Produced by Solid-State Reaction
R. Mondragon (Universidad Nacional Autónoma de México, Mexico), R. Morales, J. Lemus-Ruiz (Universidad Michoacana de San Nicolás de Hidalgo, Mexico), and O. Navarro (Universidad Nacional Autónoma de México, Mexico)
MoP10
Nano-Attached Tungsten Particle Syntheses and Sintering Behaviors
Hyesook Joo, Chulwoon Han, Dohyang Kim (KITECH, Korea), and Hanshin Choi (Yonsei Univ., Korea)
MoP11
Sintering Behaviors of a Fe-Alloy in the Hot Pressing Process
Hyesook Joo, Chulwoon Han, and Hanshin Choi (KITECH, Korea)
MoP13
Experimental and Computational Study of Reactive Hot Pressing of Zirconium Carbide
T. Chakrabarti, L. Rangarj, T. A. Abinandanan, and V. Jayaram (Indian Inst. Of Science, India)
[Poster Session I] 15:30~17:10 p46
MoP01
Microstructure and Properties of (Ti,W)(CNB)-Ni Cermets
Gao Zhe, Jinhong Kim, and Shinhoo Kang (Seoul Nat’l Univ., Korea)
MoP02
Effect of P2O5 Content and Sintering Temperature on Grain Growth Behavior of ZnO during Liquid Phase Sintering of ZnO-P2O5 System
Im-Sic Choi, Young-Woo Heo, Joon-Hyung Lee, and Jeong-Joo Kim (Kyungpook Nat’l Univ., Korea)
MoP03
The Nature Bonding Adhesion of TiC-Based Interface: The First Principle Calculation
Jinhong Kim, Moon-soo Seo, and Shinhoo Kang (Seoul nat’l Univ., Korea)
MoP04
N2 Effect on W-ZrC Systems
Jaehyuk Lim, Choong-Kwon Park, Moon-Soo Seo, and Shinhoo Kang (Seoul Nat’l Univ., Korea)
MoP05
The Effect of Copper Addition on Mechanical Properties of Injection Molded Pre-Alloyed Fe-2%Ni-0.5C Steels
Eifelson Malik and Eung Ryul Baek (Yeungnam Univ., Korea)
MoP06
Effect of Particle Size Distribution on the Mechanical Properties of Sintered Titanium Compact
Jae-Keun Hong, Jeoung-Han Kim, Jong-Taek Yeom, and Nho-Kwang Park (KIMS, Korea)
I n t e r n a t i o n a l C o n f e r e n c e o n S i n t e r i n g 2 0 1 1
16
Ⅳ TECHNICAL PRoGRAM
August 29, 2011 (Mon.)3. Technical Program
MoP34
Mechanical Properties Enhancement of W-Ni-Fe Heavy Alloy by Microstructure Control
Tae Ho Lee, Young Jin Jeon, Jin Woo Kim, Se Hoon Kim, and Young Do Kim (Hanyang Univ., Korea)
MoP35
Grain Growth Induced Densification during Liquid-Phase Sintering of WC-Co with Faceted Grains
Dong-Yeol Yang, Duk Young Jeon, and Suk-Joong L. Kang (KAIST, Korea)
MoP36
Influence of SiC Composition on Mecha-nical Properties and Microstructure of Reaction-Bonded SiC Ceramics
B. K. Jang, Y. Sakka, H. Tanaka, H. Murakami (Nat’l Inst. for Materials Science, Japan), S. Y. Kim, I. S. Han, and S. K. Woo (Korea Inst. of Energy Research, Korea)
MoP37
Core-shell Structure to Monitor the Sintering Process in SiC and SrTiO3 Ceramics
Hui Gu (Chinese Academy of Sciences, China)
MoP38
Effect Two-step Sintering on Optical Transmittance and Mechanical Strength of Polycrystalline Alumina Ceramics
Hyung Soo Kim, Jeong Sik Park (KINORI Co., Ltd., Korea), Young Do Kim (Hanyang Univ., Korea), and Kwang Duk Kim (KAIST, Korea)
MoP28
A Study on the Microstructure and Mechanical Properties of T42 High-Speed Steel (HSS) Produced by Powder Injection Molding (PIM)
Dong-Wook Park, Kyoung-Rok Do, Sung-Hyun Choi, and In-Shup Ahn (Gyeongsang Nat’l Univ., Korea)
MoP29
Sintering Behaviors of Ti and TiH2 Powder Compactions
Dong-Won Lee (KIMS, Korea), Ji Hwan Park (MTIG Ltd., Korea), and Jongryoul Kim (Hanyang Univ., Korea)
MoP30
Cermet Prepared by Metallothermically Synthesized TiCN Nano-Particles
Dong-Won Lee, Kyung-Tae Kim, Sang-Hyun Heo (KIMS, Koera), and Jei-Pil Wang (Pukyung Nat’l Univ., Korea)
MoP31
Sintering Behavior of 95W-3.5Ni-1.5Fe Thin-walled Products Made by Plasma Spray Forming
Yueming Wang, Xiang Xiong, Lu Xie (Central South Univ., China), and Xiaobing Min (Hunan Research Inst. of Metallurgy and Materials, China)
MoP32
Sintering Behavior of Calcium Phosphate Ceramics Prepared from Nature Material and Phosphoric Acid
Sang-Jin Lee and Hong-Soo Choi (Mokpo Nat’l Univ., Korea)
MoP33
Activation Energy of Grain Growth of (Ti1-xWx)C-Ni Cermets
Jinmyung Kim, Jiwoong Kim, and Shinhoo Kang (Seoul Nat’l Univ., Korea)
Lotus Hall Lobby + Lily MoP22
Suppression of Sintering Defects in Metal/Ceramic Graded Layers by using Inhomogeneous Powder Mixtures
K. Shinagawa and Y. Sakane (Kagawa Univ., Japan)
MoP23
Fabrication of Copper-graphite Compo-sites by Spark Plasma Sintering and Its Characterization
Bunyod Allabergenov, Soo Jeong Jo, Amir Abidov, Oybek Tursunkulov (Kumoh Nat’l Inst. of Tech., Korea), Christian Gomez (Universidad Autonoma de San Luis Potosi, Mexico), Sung Bum Park, and Sungjin Kim (Kumoh Nat’l Inst. of Tech., Korea)
MoP24
Characterization Investigations of Lanth-anum Oxide Reinforced Steatite-20 wt.% Cordierite Ceramics
H. Gökçe, D. Ağaoğulları, İ. Duman, and M. L. Öveçoğlu (Istanbul Technical Univ., Turkey)
MoP25
Sintering Process Exploration by Individual Contact Strength Analysis Method
Aleshin Ivan and Makarov Nokolay (Mendeleev Univ. of Chemical Tech. of Russia, Russia)
MoP26
Microstructural Development in Porous Silicon Carbide Ceramics
Jung-Hye Eom and Young-Wook Kim (Univ. of Seoul, Korea)
MoP27
Densification and Microstructure of Gas-Atomized Cu-In and Cu-Ga Powder by Sintering and Rolling Processes
Hyeon-Taek Son and Dae-Won Kim (KITECH, Korea)
17
August 28 ~ September 1, 2011/ The Shilla Jeju, Jeju, Korea
SINTERING 2011Meeting Guide & Abstracts
TECHNICAL PRoGRAM Ⅳ
August 29, 2011 (Mon.)3. Technical Program
Lotus Hall Lobby + Lily MoP51
Colorative Mechanism of Goryeo Celadon Studied by Mössbauer Spectroscopy and Chromaticity Analysis
Jong-Young Kim, Hyunggoo No, A Young Jeon, Ungsoo Kim, Woo Seok Cho, Kyung Ja Kim (KICET, Korea), Chin Mo Kim, and Chul Sung Kim (Kookmin Univ., Korea)
MoP52
Effect of Organic Hollow Microsphere Addition on the Lightweight and Firing Behavior of Whiteware
J. H. Pee, H. S. Choi, G. H. Kim, W. S.Cho, and K. J. Kim (KICET, Korea)
MoP53
Effect of Glass Hollow Microsphere Addition on the Lightweight and Firing Behavior of Whiteware
J. H. Pee, H. S. Choi, G. H. Kim, W. S.Cho, and K. J. Kim (KICET, Korea)
MoP54
Phase Stability of the (Zr,W)C Solid Solution with Density Functional Theory Calcuation
Moonsu Seo, Jinhong Kim, and Shinhoo Kang (Seoul Nat’l Univ., Korea)
MoP55
Shape Memory Characteristics of Powder Metallurgy Processed Ti50Ni40Cu10 Alloy
Yeon-Wook Kim (Keimyung Univ., Korea)
MoP56
Electrophysical Properties of Dopant Material on the Nanocomposites
Sang Heon Lee (Sunmoon Univ., Korea)
MoP57
Evaluation and Analysis of Distortion for Injection Molded Ti6Al4V Thick Parts
S. Virdhian, T. Kkawatani, T. Osada, F. Tsumori, and H. Miura (Kyushu Univ., Japan)
MoP44
Microstructure Formation of Porous Silicon Carbide Ceramics from Silicon and Carbon Mixture
Dong Hwa Lee, Jong Chan Kim, and Deug Joong Kim (Sungkyunkwan Univ., Korea)
MoP45
Effect of Na2CO3 Addition on Grain Shape and Abnormal Gain Growth Behaviour in Lead-free Piezoelectric Relaxor (Na0.5Bi0.5)TiO3-BaTiO3 System
Ji-Hoon Park, Dibyaranjan Rout (KAIST, Korea), Ho-Young Lee (Sun Moon Univ., Korea), and Suk-Joong L. Kang (KAIST, Korea)
MoP46
Synthesis of LiCoO2 Nano Particles from Waste Hard Metal (WC-Co)
Heeseung Yang, Ri Yu, YoonJin Kim, and Jae-Hwan Pee (KICET, Korea)
MoP47
Effect of Crystallographic Anisotropy on Microstructural Evolution of Oxide Ion Conducting Lanthanum Silicates
Dong-Kyu Shin, Young Kim, Hyun-Ho Seo, Eui-Chol Shin, and Jong-Sook Lee (Chonnam Nat’l Univ., Korea)
MoP48
Fabrication of In-situ TiB2-TiC-Ti3SiC2 Com-posites by Hot-pressing Sintering
Xiao Dai-hong, Yuan Tei-chui,, and He Yue-hui (Central South Univ., Korea)
MoP49
Development of CNT-Dispersed Si3N4 Ceramics with High Strength and Electrical Conductivity by Adding HfO2 as a Sintering Aid
M. Matsuoka, S. Yoshio, T. Yamakawa, J. Tatami, T. Wakihara, K. Komeya, and T. Meguro (Yokohama Nat’l Univ., Japan)
MoP39
Microstructural Evolution during Co-sintering of Multi-layer Ceramic Capacitors: Coupling of Simulation and Experiment
Zilin Yan (INPG-UJF-CNRS, France), Olivier Guillon (TU Darmstadt, Germany), Christophe L. Martin (INPG-UJF-CNRS, France), Chul-Seung Lee (Samsung Electro-Mechanics, Korea), and Didier Bouvard (INPG-UJF-CNRS, France)
MoP40
Effect of the Cubic Phase on the Develop-ment of Textured Surface in Yttria-Doped Tetragonal Zirconia Polycrystals during Nitridation
Tai-Joo Chung, Seung-Su Ahn, Kyung-Sik Oh (Andong Nat’l Univ., Korea), Jong-Sook Lee (Chonnam Nat’l Univ., Korea), Hye-Sung Kim (Pusan Nat’l Univ., Korea), Hyung J. Cho (Univ. ofCentral Florida, USA), and Doh-Yeon Kim (Univ. of Ulsan, Korea)
MoP41
Non-stationary Grain Growth in Pure Ni at Various Sintering Temperatures
Sang-Hyun Jung, Duk Young Yoon, and Suk-Joong L. Kang (KAIST, Korea)
MoP42
The Effect of Sintering Conditions on the Properties of WC-10wt%Co PIM Compacts
Sang Dae Kang, Sung Hyhun Choi, Kyung Rok Do, and In Shup Ahn (Gyeongsang Nat’l Univ., Korea)
MoP43
Magnetic Properties of ( Nd,Dy) - Fe -B Sintered Magnets by Microstructure Changes
J. W. Kim, S. H. Kim, and Y. D. Kim (Hanyang Univ., Korea)
I n t e r n a t i o n a l C o n f e r e n c e o n S i n t e r i n g 2 0 1 1
18
Ⅳ TECHNICAL PRoGRAM
3. Technical Program August 29, 2011 (Mon.)
Lotus Hall Lobby + Lily MoP72
Effect of Sintering Conditions on the Microstructure and Mechanical Properties of Ti-based solid Solution Cermets
Jungmin Lee, Jiwoong Kim, and Shinhoo Kang (Seoul Nat’l Univ., Korea)
MoP73
Bonding Ability of WC-Co Hard Metal and Fe-base Alloy
Chulwoong Han and Hanshin Choi (Korea Inst. of Industrial Tech., Korea)
MoP74
Crystallization Behavior of Diopside/Cordierite Glass-ceramics by 2-stages Sintering Method
Yongsung Kim and Seunggu Kang (Kyonggi Univ., Korea)
MoP75
Effect of Different Sintering Methods on Lightening the Artificial Aggregates Fabricated using Reject Ash Discharged from Thermal Power Plant
Min A Kang, Seung Gu Kang, Yoo Teak Kim, and Gi Kang Lee (Kyonggi Univ., Korea)
MoP76
Characterization of Cordierite/Diopside Composites Fabricated by Sintering CaO-MgO-Al2O3-SiO2 Glass Frit System
Sinae Jo and Seunggu Kang (Kyonggi Univ., Korea)
MoP77
Nanoscale Sm2Fe17 Intermetallic Powder Synthesized by Reduction-diffusion Process using a Powder Mixture of Sm2O3-Fe2O3-CaH2
Joon-Chul Yun, Su-Min Yoon, Geon-Yong Lee, and Jai-Sung Lee (Hanyang Univ., Korea)
MoP66
Effects of Chemicophysical Properties of Carbon on Bloating Characteristics of Artificial using Coal Bottom Ash
Shin-hyu Kang, Ki-gang Lee, Yoo-taek Kim, and Seung-gu Kang (Kyonggi Univ., Korea)
MoP67
A Study on the Fabrication of Zirconium Oxide Ingot for Electron Beam Evaporation Process
Yoon-Suk Oh, Kil-Ho Kwak, Seong-Won Kim, Sung-Min Lee, Hyung Tae Kim (KICET, Korea), and Byung-Koog Jang (NIMS, Japan)
MoP68
Quantitative Investigation of Grain Growth Inhibition in WC-Co Alloys
S. S. Ahn, S. Y. Ahn, and D. B. Park (Korloy Inc., Korea)
MoP69
Thermodynamic Analysis of SiC Deposition in SiCl4-C3H8-H2 System
Jun-Woo Kim, Seong-Min Jeong, Hyeong-Tae Kim, Kyung-Ja Kim (KICET, Korea), Jong-Heun Lee (Korea Univ., Korea), and Kyoon Choi (KICET, Korea)
MoP70
Fabrication and Properties of Hot Press Sintered ZrO2/BN Ceramics as a SiC Addition
Jong Pil Ahn, Joo Seok Park, Jae Hong Chae, Kyoung Hun Kim, Seong Min Jeong (KICET, Korea), Han Nam Chung, and Seung Seok Lee (RIST, Korea)
MoP71
Characterization of Very-High-Tempera-ture Ceramic Coatings Prepared by Plasma-praying Method for Melting Crucibles of Metallic Fuels
Ki-Hwan Kim, Yoon-Myung Woo, Seok-Jin Oh, Chang-Kyu Kim, and Chan-Bock Lee (KAERI, Korea)
MoP58
“Re Effects” on Tungsten Alloy Products Fabricated by Plasma Spray Forming
Xiang Xiong, Yueming Wang, Lu Xie (Central South Univ., China), and Xiaobing Min (Hunan Research Inst. Of Metallurgy and Materials, China)
MoP59
Evaluation of the Mechanical Properties of Sintered Al-Si-SiC Alloy Powders
Sangsun Yang, Haris Rudianto, and Yong-Jin Kim (KIMS, Korea)
MoP60
Fabrication of Micro Patterned Ceramic Mold by Laser Patterning
H. G. Kang, Y. Xu, F. Tsumori, and H. Miura (Kyushu Univ., Japan))
MoP63
Synthesis and Characterization of Graphene -Aluminosilicate Nanocomposite
Jong-Young Kim, Jae-Ho Sin, Ungsoo Kim, and Woo-Seok Cho (KICET, Korea)
MoP64
Fabrication and Densification Mechanism of W-Cu Composites by Low-Temperature Activated Sintering
Guoqiang Luo, Pingan Chen, Qiang Shen, Meijuan Li, and Lianmeng Zhang (Wuhan Univ. of Tech., China)
MoP65
Study on the Change of ultrasonic Velocity in the Ti(C,N)-based Alloys
S. U. Oh, S. Y. Ahn, Y. H. Kim, D. B Park (Korloy Inc., Korea), J. W. Byeon (Seoul Nat’l Univ. of Science and Tech., Korea), and T. J. Jung (Andong Nat’l Univ., Korea)
19
August 28 ~ September 1, 2011/ The Shilla Jeju, Jeju, Korea
SINTERING 2011Meeting Guide & Abstracts
TECHNICAL PRoGRAM Ⅳ
3. Technical Program
Room A (Lotus Hall 1) Room B (Lotus Hall 2) Room C (Lotus Hall 3)
[TuC1] 10:10~11:50 p74
SPS/FAST (Modeling and Mechanisms)Session Chairs : Prof. Omer Van der Biest (Katholieke Universiteit Leuven, Belgium)Prof. Rachman Chaim (Technion - Israel Institute of Technology, Israel)
TuC1-1 10:10~10:40
[Invited] Pulsed Electric Current Sintering (PECS), a Review of Modeling Results and Mechanisms
Omer Van der Biest, Kim Vanmeensel (Katholieke Universiteit Leuven, Belgium), Alexander Laptev (Donbass State Engineering Academy, Ukrine), and Jozef Vleugels (Katholieke Universiteit Leuven, Belgium)
TuC1-2 10:40~11:10
[Invited] Advanced Eelectric Current Activated/Assisted Sintering Technology: Modeling and Development
Salvatore Grasso, Yoshio Sakka (NIMS, Japan), and Giovanni Maizza (Politecnico di Torino, Italy)
TuC1-3 11:10~11:30
Fundamental Coupled Electrical, Thermal and Mechanical Analysis of Spark Plasma Sintering
Eugene A. Olevsky, Cristina Garcia-Cordona, William L. Bradbury, Evan Khaleghi, Wei Li, and Randall M. German (San Diego State Univ., USA)
TuC1-4 11:30~11:50
Grain Growth by Grain Rotation during Spark Plasma Sintering of Ceramic Nanoparticles
R. Chaim and R. Marder (Technion-Israel Inst. of Tech., Israel)
[TuB1] 10:10~12:10 p72
Modeling ⅡSession Chairs : Prof. Fumihiro Wakai (Tokyo Inst. of Tech., Japan)Dr. Julien Bruchon (EMSE, France)
TuB1-1 10:10~10:40
[Invited] Prediction of Macroscopic Shrin-kage in Sintering from Microstructure
Fumihiro Wakai (Tokyo Inst. of Tech., Japan)
TuB1-2 10:40~11:10
[Invited] Densification Modeling of Porous Ceramics with Bimodal Pore Size Distribution
Jie Lu and Jan Ma (Nanyang Technological Univ., Singapore)
TuB1-3 11:10~11:30
Finite Element Simulation of Mass Transport during Sintering of a Granular Packing
J. Bruchon, D. Pino-Munoz, F. Valdivieso, and S. Drapier (EMSE, France)
TuB1-4 11:30~11:50
Modeling of Distortion at Liquid Phase Sintering due to Redistribution of the Binder Phase during Solidification
Bo Jansson, Peter Matsson, and Jenni Zackrisson (Seco Tools AB, Sweden)
TuB1-5 11:50~12:10
A Granular Scale Model for the Solid State Free Sintering: Results on the Evolution of Two Grains
J. Léchelle (CEA Cadarache, France), R. Boyer, and K. Saikouk (Université de Provence, France)
August 30, 2011 (Tue.)
[TuA1] 10:10~12:10 p71
WC-Co/CermetSession Chairs : Prof. Takahisa Yamamoto (U. Tokyo, Japan)Prof. Shinhoo Kang (Seoul Nat’l Univ., Korea)
TuA1-1 10:10~10:30
The Effect of Carbon Activity on WC Coarsening in Cemented Carbides
Ida Borgh, Annika Borgenstam, and John Ågren (KTH Royal Inst. of Tech., Sweden)
TuA1-2 10:30~10:50
A Novel Sintering Technique for Fabrication of Functionally Gradient WC-Co Cemented Carbides
I. Konyashin, S. Hlawatschek, B. Ries, and F. Lachmann (Element Six GmbH, Germany)
TuA1-3 10:50~11:20
[Invited] High Resolution Transmission Electron Microscopy Study for WC-Co Based Cemented Carbides
T. Yamamoto, I. Sugiyama, Y. Mizumukai (The Univ. of Tokyo, Japan), T. Taniuchi, F. Shirase, K. Okada (Mitsubishi Materials Corp., Japan), T. Tanase (Japan New Metal Co., Japan), and Y. Ikuhara (The Univ. of Tokyo, Japan)
TuA1-4 11:20~11:50
[Invited] Formation of Platelet WC in (W,M)C-Co Cermets
J. W. Kim, J. H. Kim, Z. Gao, and S. Kang (Seoul Nat’l Univ., Korea)
TuA1-5 11:50~12:10
The Effect of Nitrogen Activity in the Atmosphere on Microstructure Gradients when Sintering Cermets
Tomas Persson, Bo Jansson, and Jenni Zackrisson (Seco Tools AB, Sweden)
I n t e r n a t i o n a l C o n f e r e n c e o n S i n t e r i n g 2 0 1 1
20
Ⅳ TECHNICAL PRoGRAM
3. Technical Program
Room A (Lotus Hall 1) Room B (Lotus Hall 2) Room C (Lotus Hall 3)
August 31, 2011 (Wed.)
[WeC1] 08:30~09:40 p81
SPS/FAST(Mechanisms/Metals)Session Chairs : Prof. Rishi Raj (Univ. of Colorado at Boulder, USA)Prof. Yuqin Zhang (Kunming Univ. of Science and Technology, China)
WeC1-1 08:30~09:00
[Invited] Mechanisms of FAST and FLASH Sintering
Rishi Raj (Univ. of Colorado at Boulder, USA)
WeC1-2 09:00~09:20
Microstructure Evolution of Ti-29Nb-13Ta-4.6Zr Biomedical Alloy with Different Sintering Temperatures Fabricated by Spark Plasma Sintering
Yuqin Zhang, Haiguang Huang (Kunming Univ. of Science and Tech., China), Lilin Luo (First People’s Hospital of Yunnan Province, China), Yehua Jiang, and Rong Zhou (Kunming Univ. of Science and Tech., China)
WeC1-3 09:20~09:40
Numerical and Experimental Analysis of the Spark Plasma Sintering (SPS) Process on a Nickel Material
C. Wolff (Universite Paul Verlaine-Metz, France), H. Couque (Nexter Munitions, France), A. Molinari, S. Mercier (Universite Paul Verlaine-Metz, France), and F. Bernard (Universite de Bourgogne, France)
[WeB1] 08:30~10:00 p80
Nano-structured Materials ISession Chairs : Prof. Xiao Hui Wang (Tsinghua Univ., China)Dr. Christopher Veitsch (Treibacher Industrie AG, Austria)
WeB1-1 08:30~08:50
Consolidation and Rheological Behaviors of Nano-structured Molybdenum Powders
Youngmoo Kim, Seong Lee, Joon-Woong Noh, Sung Ho Lee (Agency for Defense Development, Korea), and Young-Sam Kwon (CetaTech, Korea)
WeB1-2 08:50~09:20
[Invited] Core-Shell Structure Formation Mechanism in Nanocrystalline Modified BaTiO3 Ceramics Prepared by Different Sintering Methods
Xiaohui Wang (Tsinghua Univ., China)
WeB1-3 09:20~09:40
Cermets Based on New Submicron Ti(C,N) Powder: Microstructural Developments during Sintering and Mechanical Properties
A. Demoly (Vienna Univ. of Tech., Austria), C. Veitsch (Treibacher Industrie AG, Austria), W. Lengauer (Vienna Univ. of Tech., Austria), and K. Rabitsch (Treibacher Industrie AG, Austria)
WeB1-4 09:40~10:00
Sintering of Patterned Alumina Films Deposited by Soft Micromolding
C. Jamin, S. Seils, R. Baraki, and O. Guillon (TU Darmstadt, Germany)
[WeA1] 08:30~10:10 p79
Atmosphere EffectSession Chairs : Prof. Dongliang Jiang (Shanghai Inst. of Ceramics, China)Prof. Graham Schaffer (The Univ. of Queensland, Australia)
WeA1-1 08:30~08:50
Enhanced Sintering Densification of Ce0.9Gd0.1O1.95-δ in Low pO2 Activity Atmosphere
Vincenzo Esposito, Zeming He, Julie Glasscock, Søren Preben Vagn Foghmoes, Arthur Vo-ha, Andreas Kaiser, and Severine Ramousse (Technical Univ. of Denmark, Denmark)
WeA1-2 08:50~09:10
Sintering of Silicon under Low Oxygen Partial Pressure
Jean-Marie Lebrun, Jean-Michel Missiaen, and Céline Pascal (SIMaP, France)
WeA1-3 09:10~09:40
[Invited] On the Role of the Atmosphere in the Sintering of Aluminium
G. B. Schaffer (The Univ. of Queensland, Australia)
WeA1-4 09:40~10:10
[Invited] Sintering YAG: Effect of Atmospheres
Yihua Huang, Dongliang Jiang, Jiangxian Zhang, Qingling Lin, and Zhengren Huang (Shanghai Inst. of Ceramics, China)
21
August 28 ~ September 1, 2011/ The Shilla Jeju, Jeju, Korea
SINTERING 2011Meeting Guide & Abstracts
TECHNICAL PRoGRAM Ⅳ
3. Technical Program
Room A (Lotus Hall 1) Room B (Lotus Hall 2) Room C (Lotus Hall 3)
August 31, 2011 (Wed.)
[WeC2] 10:30~12:00 p85
SPS/FAST(Ceramics)Session Chairs : Prof. Takashi Goto (Tohoku Univ., Japan)Prof. Hiroshi Kimura (Nat’l Defense Academy, Japan)
WeC2-1 10:30~10:50
Spark Plasma Sintered Reaction-bonded Silicon Nitride (SPSRBSN) – Processing Optimization and Properties
Sea-Hoon Lee, Hong-Hee Jung, and Hai-Doo Kim (KIMS, Korea)
WeC2-2 10:50~11:20
[Invited] Spark Plasma Sintering of cBN-Based Composites Combined with Rotary Chemical Vapor Deposition
Takashi Goto, Jianfeng Zhang, and Rong Tu (Tohoku Univ., Japan)
WeC2-3 11:20~11:40
Bulk Amorphous Synthesis of B4C-SiC by Filed Assisted Pressure Sintering
Hiroshi Kimura and Yutaka Mitsui (Nat’l Defense Academy, Japan)
WeC2-4 11:40~12:00
Pulse Plasma Sintering of WCCo/Diamond Composites
Marcin Rosiński, Andrzej Michalski, and Jerzy Szawłowski (Warsaw Univ. of Tech., Poland)
[WeB2] 10:30~11:50 p84
Nano-structured Materials IISession Chairs : Prof. Jingzhe Pan (Univ. of Leicester, UK)Dr. Deborah Clare Blaine (Stellenbosch Univ., South Africa)
WeB2-1 10:30~11:00
[Invited] What Do We Know about Nano-effects in Sintering?
Jingzhe Pan (Univ. of Leicester, UK)
WeB2-2 11:00~11:30
[Invited] Sintering of Electrophoretically Deposited (EPD) Platinum Nanoparticles
Alexander Ilchev (Univ. of the Western Cape, South Africa), Deborah Blaine (Stellenbosch Univ., South Africa), Leslie Petrik (Univ. of the Western Cape, South Africa), Patrick Ndungu (Univ. of KwaZulu Natal, South Africa), and Alexander Nechaev (Univ. of the Western Cape, South Africa)
WeB2-3 11:30~11:50
The Sintering and ECAP Response on Mechanical and Microstructure Behavior of PM Aluminium Alloys
Róbert Bidulský, Marco Actis Grande (Politecnico di Torino, Italy), Jana Bidulská, Tibor Kvačkaj (Technical Univ. of Košice, Slovakia), Lidia Lityńska-Dobrzyńska, and Jan Dutkiewicz (Polish Academy of Sciences, Poland)
[WeA2] 10:30~12:10 p82
Interface Structure and SinteringSession Chairs : Prof. Jian Luo (Clemson Univ., USA)Dr. Michael Bäuer (Karlsruhe Inst. of Tech., Germany)
WeA2-1 10:30~11:00
[Invited] Microstructural Control in Perovskite Ceramics
M. J. Hoffmann, Wolfgang Rheinheimer, and Michael Bäurer (KIT, Germany)
WeA2-2 11:00~11:20
Structural Transition of Grain Boundaries and Related Grain Growth Behavior in BaTiO3 with A-site Donor Concentration and Oxygen Partial Pressure
Se-Min An and Suk-Joong L. Kang (KAIST, Korea)
WeA2-3 11:20~11:50
[Invited] Developing Grain Boundary “Phase” Diagrams to Predict Activated Sintering Phenomena
Jian Luo (Clemson Univ., USA)
WeA2-4 11:50~12:10
Effect of Grain Boundary Structure on Densification during Sintering
Min-Gon Lee and Suk-Joong L. Kang (KAIST, Korea)
I n t e r n a t i o n a l C o n f e r e n c e o n S i n t e r i n g 2 0 1 1
22
Ⅳ TECHNICAL PRoGRAM
3. Technical Program
Room A (Lotus Hall 1) Room B (Lotus Hall 2) Room C (Lotus Hall 3)
August 31, 2011 (Wed.)
[WeC3] 13:30~15:00 p89
SPS/FAST(Ceramics)Session Chairs : Prof. Eugene Olevsky (San Diego State Unvi., USA)Dr. Oliver Guillon (TU Darmstadt, Germany)
WeC3-1 13:30~14:00
[Invited] Field Assisted Sintering of Zinc Oxide
Olivier Guillon (TU Darmstadt, Germany)
WeC3-2 14:00~14:20
Investigation of Sintering Behaviour of Biomimetic Hydroxyapatite Powder Sintered by Spark Plasma Techniques
Türkay Yıldız (Yildiz Technical Univ., Turkey), Deniz Uzunsoy (Anadolu Univ., Turkey), A. Binnaz Hazar Yoruç, Erhan Ayas (Yildiz Technical Univ., Turkey), and Ahmet Koyun (Anadolu Univ., Turkey)
WeC3-3 14:20~14:40
Apparent Activation Energy for Densifi-cation of Alumina-based Composites by FAST (Field Assisted Sintering)
J. P. Erauw, M. Demuynck, and F. Cambier (Belgian Ceramic Research Centre, Belgium)
WeC3-4 14:40~15:00
Microstructure and Thermal Conductivity of Multiwalled Carbon Nanotube-Copper Composites Fabricated by Spark Plasma Sintering
Seungchan Cho, Keiko Kikuchi, and Akira Kawasaki (Tohoku Univ., Japan)
[WeB3] 13:30~15:00 p88
Nano-structured Materials IIISession Chairs : Prof. Zhigang (Zak) Fang (Univ. of Utah, USA)Dr. David B. Robinson (Sandia Nat’l Laboratories, USA)
WeB3-1 13:30~14:00
[Invited] Sintering of Nanosized Particles – Is It Really unique?
Zhigang Zak Fang, Hongtao Wang, and Vineet Kumar (Univ. of Utah, USA)
WeB3-2 14:00~14:20
High Heating Rate Sintering for Nano-Structure Development and Net-Shaping of Powder Composites
Eugene A. Olevsky, William L. Bradbury, and Yen-Shan Lin (San Diego State Univ., USA)
WeB3-3 14:20~14:40
Low Temperature Synthesis and Sintering of d-u, d-u/La Alloy and d-uO2 Nanoparticles
Summer Ferreira, Tina M. Nenoff (Sandia Nat’l Lab., USA), Benjamin W. Jacobs (Protochips Inc., USA), David B. Robinson, Jianyu Huang, Paula Provencio, Donald J. Hanson, and Veena Tikare (Sandia Nat’l Lab., USA)
WeB3-4 14:40~15:00
Thermal Stability of Nanopores in Palladium Alloys used for Hydrogen Storage
David B. Robinson, Benjamin W. Jacobs, Joshua D. Sugar, Markus D. Ong, Mary E. Langham (Sandia Nat’l Lab., USA), and Ilke Arslan (Univ. of California-Davis, USA)
[WeA3] 13:30~15:10 p86
Grain GrowthSession Chairs : Prof. Randall German (San Diego State Unvi., USA)Prof. Toshio Kimura (Keio Univ., Japan)
WeA3-1 13:30~14:00
[Invited] Microstructure Development in Lead-Free Piezoelectric Ceramics Made by Templated Grain Growth Process
Toshio Kimura (Keio Univ., Japan)
WeA3-2 14:00~14:30
[Invited] Transient Intergranular Glassy Films in Ceramics to Initiate Abnormal Grain Growth
Hui Gu (Chinese Academy of Sciences, China)
WeA3-3 14:30~14:50
Factors Determining Grain Orientation in BLSFs Made by Templated Grain Growth
Ken-ichi Onodera, Toshio Kimura (Keio Univ. Japan)
WeA3-4 14:50~15:10
Coarsening during Sintering
Randall M. German (San Diego State Univ., USA)
23
August 28 ~ September 1, 2011/ The Shilla Jeju, Jeju, Korea
SINTERING 2011Meeting Guide & Abstracts
TECHNICAL PRoGRAM Ⅳ
3. Technical Program
Room A (Lotus Hall 1) Room B (Lotus Hall 2) Room C (Lotus Hall 3)
August 31, 2011 (Wed.)
[WeC4] 15:30~17:00 p93
Sintering Behavior - Ceramic ⅡSession Chairs : Prof. Fuqiang Huang (Peking Univ., China)Prof. Hongliang Han (Univ. of Science and Tech. Beijing, China)
WeC4-1 15:30~15:50
Fundamental Research on Sintering Technology with Super Deep Bed
Hongliang Han, Shengli Wu, Luowen Ma, Gensheng Feng (Univ. of Science and Tech. Beijing, China), and Weizhong Jiang (Baoshan Iron & Steel Co., Ltd., China)
WeC4-2 15:50~16:10
Cationic Diffusion in Full Dense and Homogeneous u0.55Pu0.45O2-x Ceramics
S. Noyau, F. Audubert, A.-C. Robisson (INSTN-CEA, France), and A. Maitre (ENSCI-Centre Européen de la Céramique, France)
WeC4-3 16:10~16:40
[Invited] Low-Temperature Rapid Sintering of Non-Oxide Energy Materials
Fuqiang Huang, Aihua Fang (Chinese Academy of Sciences, China), and Chongying Yang (Peking Univ., China)
WeC4-4 16:40~17:00
Densification and Microstructure Changes of Ceramic Powder Blends during Microwave Sintering.
A. Guyon, D. Bouvard, C. P. Carry, and J. M. Chaix (Grenoble INP, France)
[WeB4] 15:30~17:00 p92
Electroceramics ⅡSession Chairs : Prof. Jae-Shin Lee (Univ. of Ulsan, Korea)Prof. Ghenadii Korotcenkov (GIST, Korea)
WeB4-1 15:30~16:00
[Invited] Solid-state Single Crystal Growth (SSCG) Technique as an Extreme Case of Grain Growth Control
Sung-Min Lee, Dong-Ho Kim (Ceracomp Co., Ltd., Korea), and Ho-Yong Lee (Sunmoon Univ., Korea)
WeB4-2 16:00~16:20
Comparison between Microwave and Conventional Sintering of Lead-Free (K,Na)NbO3 Piezoelectric Ceramics Modified with Li and Ta
Hyoung Su Han, Seong Kyu Jeong, Han Bok Lee, Chang-Ho Yoon (Univ. of Ulsan, Korea), Soon-Jong Jeong (KERI, Korea), and Jae-Shin Lee (Univ. of Ulsan, Korea)
WeB4-3 16:20~16:40
The Role of Doping Additives in Structural Stability of SnO2 Films Deposited by Spray Pyrolysis
G. Korotcenkov and B. K. Cho (GIST, Korea)
WeB4-4 16:40~17:00
Sintering of Silicon Nanoparticles from Organic Dispersion for Electronic Applications
E. Drahi, S. Blayac, S. Saunier, F. Valdivieso, D. Zymelka, and Patrick Benaben (ENSM-SE, France)
[WeA4] 15:30~16:40 p91
CompositesSession Chairs : Prof. Mike Reece (Univ. of London, UK)Dr. Kyung Tae Kim (KIMS, Korea)
WeA4-1 15:30~16:00
[Invited] The Effect of CNTs on the Sintering and Grain Growth of Ceramics
Ben Milsom, Giuseppe Viola (Queen Mary Univ., UK), Fawad Inam (Glyndŵr Univ. UK), and Micheal Reece (Queen Mary Univ., UK)
WeA4-2 16:00~16:20
Fabrication Process and Characterization of CNT/AlN/Al2O3 Nanocomposites
Min Young Koo, Bin Lee (KAIST, Korea), Kyung Tae Kim (KIMS, Korea), and Soon Hyung Hong (KAIST, Korea)
WeA4-3 16:20~16:40
Sintering and Synthesis of Zirconium Diboride using Zircon as Source Material
Hyeon cheol Oh (Hanyang Univ., Korea), Sea hoon Lee, Hai doo Kim (KIMS., Korea), and Sung churl Choi (Hanyang Univ., Korea)
I n t e r n a t i o n a l C o n f e r e n c e o n S i n t e r i n g 2 0 1 1
24
Ⅳ TECHNICAL PRoGRAM
3. Technical Program
WeP15
Microwave Assisted Sintering of Wollast-onite Powder Synthesized from Eggshells
S. Vichaphund, D. Atong, and P. Thavorniti (Nat’l Metal and Materials Tech. Center, Thailand)
WeP16
Effect of Fe-Ni Alloy Nanoparticles on the Mechanical Properties and Microstructure for Al2O3/Fe-Ni Nanocomposites Prepared by Rapid Sintering
Young-In Lee, Dong Hwan Kim, Jun-Tae Lee, Kihun Seong, and Yong-Ho Choa (Hanyang Univ., Korea)
WeP17
Sintering Behavior and High Temperature Mechanical Properties of Nano-structured TZM Alloys
Youngmoo Kim, Seong Lee, Joon-Woong Noh, and Sung Ho Lee (Agency for Defense Development, Korea)
WeP18
Properties and Rapid Consolidation of Nanocrystalline TiAl-Al2O3 Composites by Pulsed Current Activated Sintering
In-Jin Shon, Hee-Ji Wang, and In-Yong Ko (Chonbuk Univ., Korea)
WeP19
Properties and Consolidation of Nanocrystalline (W,Ti)Si2-SiC Composite from Mechanically Activated Powders by Pulsed Current Activated Combustion Synthesis
In-Jin Shon, Ha-Young Song, and In-Yong Ko (Chonbuk Nat’l Univ., Korea)
WeP07
Effect of Electric Field on the Grain Boundary Mobility in 8-Y Zirconia Ceramics
Seung-Wan Kim (Univ. of Pennsylvania, USA), Suk-Joong L. Kang (KAIST, Korea), and I-Wei Chen (Univ. of Pennsylvania, USA)
WeP09
Effect of Size of Compacts on Sintering during Electro-Discharge Sintering
J. Y. Cho, G. A. Song, W. H. Lee, J. H. Lee, and K. B. Kim (Sejong Univ., Korea)
WeP10
Investigation on Effect of the Number of Discharging on Microstructure of Porous Ti-compacts
J. H. Lee, J. Y. Cho, G. A. Song, W. H. Lee, and K. B. Kim (Sejong Univ., Korea)
WeP11
Reactive Sintering of Iodoapatite in Presence of Impurities
Sophie Le Gallet (Université de Bourgogne, France), Lionel Campayo (CEA, France), Yuri Grin (Max-Planck-Institut für Chemische Physik fester Stoffe, Germany), and Frédéric Bernard (Université de Bourgogne, France)
WeP12
Coupling of Computational Schemes for Electromagnetic, Thermal and Mechanical Phenomena of Microwave Sintering
Sergey Bogachev, Didier Bouvard (Grenoble INP, France), Erin M. Kiley, and Vadim V. Yakovlev (Worcester Polytechnic Inst., USA)
WeP14
Development and Manufacturing the Large Scale Shrouded Impeller from a PM Superalloy using HIP Method
B. I. Yang, L. Park (Doosan Heavy Industries & Construction., Korea), Victor. Samarv, Dmitry Seliverstov, and Alex. Bissikalov (Synertech PM, Inc., USA)
[Poster Session II] 17:00~18:40 p95
WeP01
Rapid Consolidation of Nanocrystalline Fe-Al2O3 from Mechanically Alloyed Powders by High Frequency Induction Heated Sintering
In-Jin Shon, Na-Ra Park, and In-Yong Ko(Chonbuk Nat’l Univ., Korea)
WeP02
Mechanical Properties and Consolidation of Nanostuctured (W,Ti)C-CNT Composites by High Frequency Induction Heated Sintering
In-Jin Shon, Kwon-il Na, and In-Yong Ko (Chonbuk Nat’l Univ., Korea)
WeP03
Densification of Reaction Bonded Silicon Nitride (SRBSN) using Lu2O3, La2O3 and Y2O3-based Sintering Additives
Hong Hee Jung, Sea-Hoon Lee, Jae Woong Ko, and Hai Doo Kim (KIMS, Korea)
WeP04
Microstructures and Mechanical Properties of W-x vol.%ZrC Sintered by Rapid Consolidation Technique
Jae-Hee Kim, Moon-Su Seo, Jung-Min Lee, and Shin-Hoo Kang (Seoul Nat’l Univ., Korea)
WeP05
Thermal Processes during High Voltage Electrical Discharge Consolidation of Powder Materials
Grigoryev E. G. (Moscow Engineering Physics Inst., Russia)
WeP06
Preparation and Oxidation Behavior of ZrB2-based Ceramics by Arc-melting Process
Seung Jun Lee and Do Kyung Kim (KAIST, Korea)
Lotus Hall Lobby + Lily
August 31, 2011 (Wed.)
25
August 28 ~ September 1, 2011/ The Shilla Jeju, Jeju, Korea
SINTERING 2011Meeting Guide & Abstracts
TECHNICAL PRoGRAM Ⅳ
3. Technical Program
Lotus Hall Lobby + Lily
August 31, 2011 (Wed.)
WeP34
High Temperature Mechanical Behavior in 316L ODS Stainless Steel
SungSoo Kim, Dae Whan Kim, and Jin Sung Jang (KAERI, Korea)
WeP35
Sintering Behavior and Microstructures of Nanostructured ZnO-ZnS Core-Shell Powder by Spark Plasma Sintering
Woo Hyun Nam (KAIST, Korea), Young Soo Lim, Won-Seon Seo(KICET, Korea), and Jeong Yong Lee (KAIST, Korea)
WeP36
Fabrication of Bulky Mesoporous TiO2 by Spark Plasma Sintering
Ja Young Cho, Woo Hyun Nam, Young Soo Lim, Won-Seon Seo (KICET, Korea), Hyung-Ho Park (Yonsei Univ., Korea), and Jeong Yong Lee (KAIST, Korea)
WeP38
Microstructural Development during Sintering of PIMed Fe Micro-Nano Powders
Woo-Kyung You, Joon-Phil Choi, Su-Min Yoon, and Jai-Sung Lee (Hanyang Univ., Korea)
WeP39
Sintering of a Bimodal Mixture of SuS 316L Micro-Nano Powders
Joon-Phil Choi, Woo-Kyung You, and Jai-Sung Lee (Hanyang Univ., Korea)
WeP40
Thermal Behavior Study of Silica- and Zircon-Coated Hematite Nanoparticles
Ri Yu, YooJin Kim, Jae-Hwan Pee, and Kyung Ja Kim (KICET, Korea)
WeP26
Effect of Minor VC-coated WC Nanopowders on the Microstructure and Properties of WC-10Co Cemented Carbides
Nan Lin and Yuehui He (Central South Univ., China)
WeP29
Pressureless Sintering and Piezoelectric Properties of Mechanochemically Synthe-sized K0.5Na0.5NbO3 Powder Compacts
Jung-Yeul Yun, Si-Young Choi (KIMS, Korea), and Suk-Joong L. Kang (KAIST, Korea)
WeP30
Controlled Porous Size of Tilting Micro Bearing by Nano Powder Injection Molding
Andy Tirta, Eung-Ryul Baek (Yeungnam Univ., Korea), Suk Sang Chang, and Jong Hyun Kim (POSTECH, Korea)
WeP31
Sintering Property of Cu Nano-colloids Prepared by Electrical Wire Explosion Process
Jaecheol Yoon, Sangsun Yang, Yong-Jin Kim, and Ji-Hun Yu (KIMS, Korea)
WeP32
Sintering Characteristics of Nano-sized Pd-Ag-glass Composite Powders with High Pd Content
J. H. Kim, Y. N. Ko, Y. J. Hong, G. H.An, and Y. C. Kang (Konkuk Univ., Korea)
WeP33
Preparation of Au, Ti, Cu Coated Atactic Poly(Vinyl Alcohol) Nanofabric by Plasma Treatment
Won Seok Lyoo, Jin Wook Cha, Min Jae Kim, Su Mi Lee, Seok Hun Han, Min Kyu Lee, Tae Hwan Oh (Yeungnam Univ., Korea), Yeong Soon Gal (Kyungil Univ., Korea), Sang Woo Joo (Yeungnam Univ., Korea), Chun Sig Kim (WooJinChem Co., Ltd., Korea), and Sung Soo Han (Yeungnam Univ., Korea)
WeP20
Simultaneous Synthesis and Consolidation of Nanocrystalline Fe-Si3N4 Composite from Mechanically Activated Powders by Pulsed Current Activated Heating
In-Jin Shon, Song-Lee Du, and In-Yong Ko (Chonbuk Nat’l Univ., Korea)
WeP21
The sintering of SiC using Al4SiC4 Additive
Byeong-Hun An, Sea-Hoon Lee, and Hai-Doo Kim (KIMS, Korea)
WeP22
Thermoelectric Property of 2D-Nanostruc-tured Cobalt Oxide Sintered by SPS TechniqueJong-Young Kim, Soon Mok Choi, Young Soo Lim, and Won-Seon Seo (KICET, Korea)
WeP23
Spark Plasma Sintering of ultrafine Bismuth Telluride-based Thermoelectric Powder
Gil-Geun Lee, Young-Hoon Choi (Pukyong Nat’l Univ., Korea), and Gook-Hyun Ha (KIMS, Korea)
WeP24
Sintering of In2O3 Films Deposited by Spray Pyrolysis
G. Korotcenkov, B. K. Cho (GIST, Korea), and V. Brinzari (State Univ. of Moldova, Republic of Moldova)
WeP25
The Effect of Steel Nano Powder Addition for the Sintered Properties of Metal Injection Molding Process
Andy Tirta and Eung-ryul Baek (Yeungnam Univ., Korea)
I n t e r n a t i o n a l C o n f e r e n c e o n S i n t e r i n g 2 0 1 1
26
Ⅳ TECHNICAL PRoGRAM
3. Technical Program August 31, 2011 (Wed.)
Lotus Hall Lobby + Lily WeP53
Anisotropy Development during Const-rained Sintering of BaO-Ln2O3-TiO2 EPD Thick Films on Flexible Pt Substrates
Ana Senos, Luis Amaral, Paula M. Vilarinho (Univ. of Aveiro, Portugal), Christine Jamin, and Olivier Guillon (TU Darmstadt, Germany)
WeP54
Electrophysical Properties of Supercon-ducting Composite Materials
Sang Heon Lee (Sunmoon Univ., Korea)
WeP55
Formation of Core-shell Grains and Its Effect on Dielectric Properties in Y-doped BaTiO₃
Sang-Chae Jeon (KAIST, Korea), Chul-Seung Lee (Samsung Electro-Mechanics, Korea), and Suk-Joong L. Kang (KAIST, Korea)
WeP56
Effect of Preparation Conditions on the Properties of BaTiO₃ Coated Ag Powders Prepared by One-step Process
Y. N. Ko, S. H. Choi, H. T. Kim, J. H. Kim, and Y. C. Kang (Konkuk Univ., Korea)
WeP57
Sintering Characteristics of Nano-sized ZnO-B₂O₃-SiO₂-CaO Glass Frits Prepared by Flame Spray Pyrolysis for Cu Electrode
Y. J. Hong, J. H. Kim, Y. N. Ko, Y. S. Lee, and Y. C. Kang (Konkuk Univ., Korea)
WeP58
Synthesis and Characterization of Gd0.2Ce0.8O2-δ (GDC20) Nanoparticles by ultrasonic Spray Pyrolysis with Salt-assisted Decomposition
Gyung-Bok Kim, Young-In Lee, Kun-Jae Lee (Hanyang Univ., Korea), Hee-Jung Park (Samsung Advanced Inst. of Tech., Korea), and Yong-Ho Choa (Hanyang Univ., Korea)
WeP47
Effects of Interface Activation Energy in Particle Consolidation
Chulwoong Han and Hanshin Choi (KITECH, Korea)
WeP48
Some Peculiarities of Submicroporosity on Compact Structures Obtained by Singtering of Niobium Powder
L. Skatkov (PCB “Argo”, Israel) and V. Gomozov (NTU KhPI, Ukraine)
WeP49
Effect of Sintering Temperature on the Microstructure and Thermoelectric Properties of Ca2.8Cu0.2Co4O9
K. Park and G. W. Lee (Sejong Univ., Korea)
WeP50
Influence of Sintering Temperature on the Microstructure and Thermoelectric Properties of Polycrystalline Fe1.995P0.005O3
G. W. Lee, H. K. Hwang, and K. Park (Sejong Univ., Korea)
WeP51
Effect of Sintering Temperature on the Electrical Properties of Nanocrystalline Ce0.8Dy0.2O2-δ Electrolytes for IT-SOFC
K. Park, H. K. Hwang, J. Kim, H. Kang, and G. W. Lee (Sejong Univ., Korea)
WeP52
Influence of Hot-Pressing Parameters in Thermoelectric Properties of n-type Bi2Se0.3Te2.7 Thick-Film
Kyung Tae Kim, Kyeong Mi Jang, and Gook Hyun Ha (KIMS, Korea)
WeP41
Sintering Behavior of β-SiC Powder
Eun Jin Jung, Jong Pil Ahn, Yoon Joo Lee, Soo Ryong Kim, Woo Teck Kwon, Jae Hong Chae, and Younghee Kim (KICET, Korea)
WeP42
Hydrothermal Preparation of Nanocrys-talline Lanthanum Silicates with High Sinterability
Yong Kim, Hyun-Ho Seo, Dong-Kyu Shin, Eui-Chol Shin, Jaekook Kim, Gon Seo, and Jong-Sook Lee (Chonnam Nat’l Univ., Korea)
WeP43
Solid Phase Sintering of Cu-Coated W Nanopowder Produced by the Combination of High Energy Ball Milling of WO₃ and CuO Mixture and Hydrogen Reduction
Sung-Soo Ryu, Hae-Ryoung Park, Hyung Tae Kim (KICET, Korea), and Young Do Kim (Hanyang Univ., Korea)
WeP44
A Study on the Properties of Mo-Cu-x Specimens Prepared by Mechanical Alloying & Sparks Plasma Sintering Processes
Kyoung Il Moon, Han Chan Lee, Duck Hyeoung Jung (KITECH, Korea), and Paik Kyun Shin (Inha Univ., Korea)
WeP45
A Study on the Synthesis Process of Al-Ti-x (x=Cu, Si, Cr, Ni) Sintered Materials and Their usefulness as the Sputtering Targets
Han Chan Lee, Kyoung Il Moon, Byun Cheol Wong, and Seung Yong Shin (KITECH, Korea)
WeP46
Fabrication of AISI 430 Ferritic Stainless Steel with Nano-sized TiCxNy for Bipolar Plate
Sungjin Kim, SungBum Park, Taeho Ban (KITECH, Korea), DongWon Lee (KIMS, Korea), and JoongHo Ahn (Andong Nat’l Univ., Korea)
27
August 28 ~ September 1, 2011/ The Shilla Jeju, Jeju, Korea
SINTERING 2011Meeting Guide & Abstracts
TECHNICAL PRoGRAM Ⅳ
3. Technical Program August 31, 2011 (Wed.)
Lotus Hall Lobby + Lily WeP70
Sintered Properties of Animal Bone-derived Hydroxyapatite
J. K. Lee, Y. K. Kim, E. J. Moon, D. W. Kang (Chosun Univ., Korea), and R. Bordia (Univ. of Washington, USA)
WeP71
Comparison of Characterizations in Ni/YSZ and Ni/Cu/YSZ Composite for High Temperature Electrolysis Cathode
Jongmin Kim and Hyun Seon Hong (Inst. for Advanced Engineering, Korea)
WeP72
nHA-zirconia-CNT Composites by Spark Plasma Sintering and Their Microstructural, Mechanical and Biological Characterization
Csaba Balázsi, Gréta Gergely (Hungarian Academy of Sciences, Hungary), Filiz Cinar Sahin, Gültekin Göller, Yucel Onuralp (Istanbul Technical Univ., Turkey), Eszter Pankotai, and Zsombor Lacza (Semmelweis Univ., Hungary)
WeP73
Characterization of Porous Titanium Reinforced by Ti Wire Mesh
Jae-Keun Hong, Jeong-Han Kim, Jong-Taek Yeom, Yong-Taek Hyun, and Seung-Eon Kim (KIMS, Korea)
WeP74
Constrained Sintering of SOFC Electrolyte Films
Xin Wang and Alan Atkinson (Imperial College London, UK)
WeP64
Influence of Sintering Conditions and Dopants on Thermoelectric Properties of a Na0.75CoO2 System
Jang-Yeul Tak, Soon-Mok Choi, and Won-Seon Seo (KICET, Korea)
WeP65
Electric Properties and Densification of BiFeO3 Ceramics Sintered in Various Atmospheres
J. H. Choi, A. Y. Kim (Hoseo Univ., Korea), S. H. Han, H.-W. Kang, H.-G. Lee, W. S. Lee (Korea Electronics Tech. Inst., Korea), J. S. Kim, and C. I. Cheon (Hoseo Univ., Korea)
WeP66
Characterization of Ho₂O₃ and La₂O₃ Doped BaTiO₃-Ceramics
V. V. Mitic (Univ. of Nis, Serbia), V. Pavlovic (Serbian Academy of Sciences and Arts, Serbia), V. Paunovic, J. Purenovic, and J. Nedin (Univ. of Nis, Serbia)
WeP67
Low-Temperature Sintering and Phase Stability of Sc₂O₃-Doped Tetragonal Zirconia Ceramics
Masanori Hirano, Hideo Kojima, and Hideaki Minami (Aichi Inst. of Tech., Japan)
WeP68
Densification Behavior and Electrical Characteristics of Co and Gd Co-doped CeO₂ Ceramics
Ho-Young Lee, Young-Woo Heo, Joon-Hyung Lee, Jeong-Joo Kim (Kyungpook Nat’l Univ., Korea), and Jong-Heun Lee (Korea Univ., Korea)
WeP69
Thermoelectric Properties of Spark Plasma Sintered In4(Se0.95Te0.05)3-x Alloy
Mahn Jeong, Ja Young Cho, Young Soo Lim, Won-Seon Seo (KICET, Korea), and Jong-Heun Lee (Korea Univ., Korea)
WeP59
Effects of Sintering Conditions and Dopant Ions on Thermoelectric Properties of ZnO at High Temperature
Kwang Hee Jung, Soon-Mok Choi, Won-Seon Seo (KICET, Korea), and Hyung-Ho Park (Yonsei Univ., Korea)
WeP60
Preparation and Characterization of Piezoelectric Bismuth-based Complex Materials
S. J. Jeong, D.-S. Lee, D. H. Lim, M. S. Kim, I. S. Kim, and J. S. Song (KERI, Korea)
WeP61
Sintering Behavior and Dielectric Properties of the Addition of Potassium Sodium Niobate (KNN) to Bismuth Sodium Titanate (BNT) Ceramics
P. Laoratanakul (Nat’l Metal and Materials Tech. Center, Thailand), R. Yimnirun (Suranaree Univ., Thailand), and S. Wongsaenmai (Maejo Univ., Thailand)
WeP62
Preparation of Dense Single-phase BiFeO₃ Ceramics by Attrition Milling and Conventional Sintering
Dibyaranjan Rout, Nari Jeon, Kyong-Seok Moon, and Suk-Joong L Kang (KAIST, Korea)
WeP63
Enhancement of Transport Properties in a Ca3Co4O9 Thermoelectric System by Combining Spark Plasma Sintering and Phase Control Techniques
Chang-Hyun Lim, Soon-Mok Choi, Won-Seon Seo (KICET, Korea), and Hyung-Ho Park (Yonsei Univ., Korea)
I n t e r n a t i o n a l C o n f e r e n c e o n S i n t e r i n g 2 0 1 1
28
Ⅳ TECHNICAL PRoGRAM
3. Technical Program
Lotus Hall Lobby + Lily
August 31, 2011 (Wed.)
WeP75
AgSnO₂ Contact Material Charaterization during Free and under Low Load Sintering Operations
Kevin Pallez, Elodie Brisson, Philippe Rogeon, Patrick Carre, Henri Desplats (Univ. of South Brittany, France), and Aurore Morancais (Schneider Electric-Electropole, France)
WeP76
Effect of Sintering Gas Condition and Temperature for Ink Jet Printed Materials
Md. Mominul Haque, Jinhyeong Kwon, Shin Young Park, Jaehak Her, and Caroline Sunyong Lee (Hanyang Univ., Korea)
WeP77
Microstructural and Mechanical Properties Investigation of PM Magnesium Matrix Composites Reinforced with Different Size of SiC Additives
Sertan Ozan, L, Feray Guleryuz (Ege Univ., Turkey), Deniz Uzunsoy (Yildiz Technical Univ., Turkey), and Rasim Ipek (Ege Univ., Turkey)
29
August 28 ~ September 1, 2011/ The Shilla Jeju, Jeju, Korea
SINTERING 2011Meeting Guide & Abstracts
TECHNICAL PRoGRAM Ⅳ
3. Technical Program
Room A (Lotus Hall 1) Room B (Lotus Hall 2) Room C (Lotus Hall 3)
[ThC1] 09:00~09:40 p124
Microwave SinteringSession Chairs : Prof. Vadim V. Yakovlev(Worcester Polytechnic Institute, USA)Prof. Eugene Olevsky(San Diego State Univ., USA)
ThC1-1 09:00~09:20
Computer Experiments in High Temperature Microwave Processing of Zirconia - Focus on Energy Efficiency and Thermal Runaway
Shawn Allan, Morganal Fall, Holly Shulman (Ceralink, Inc., USA), and Vadim V. Yakovlev (Worcester Polytechnic Inst., USA)
ThC1-2 09:20~09:40
Hybrid Microwave Sintering Study through Contactless Monitoring of Shrinkage and Temperature Distribution
Daniel Zymelka, Sebastien Saunier, Jerome Molimard, and Dominique Goeuriot (EMSE, France)
[ThB1] 08:40~10:10 p122
SOFCSession Chairs : Prof. Alan Atkinson (Imperial College London, UK)Prof. Fujio Tsumori (Kyushu Univ., Japan)
ThB1-1 08:40~09:10
[Invited] Constrained Sintering of SOFC Electrolyte Layers
Alan Atkinson (Imperial College, UK)
ThB1-2 09:10~09:30
Effects of Sintering Parameters on Morphology of the Single/Multi Layer Ceramic Sheet with Micro Pattern for Solid Oxide Fuel Cell (SOFC)
Yang Xu, Fujio Tsumori, Takuro Nishida, Hyun-Goo Kang, and Hideshi Miura (Kyushu Univ., Japan)
ThB1-3 09:30~09:50
Cosintering of an Anode-supported Solid Oxide Fuel Cell based on Scandia Stabilized Zirconia Electrolyte
T. Reynier, D. Bouvard, C. P. Carry (Grenoble INP, France), and R. Laucournet (CEA-Liten, France)
ThB1-4 09:50~10:10
Effect of External Pressure during the Preliminary Heat Treatment on the Densification of xAl-ZnO (x=1,2,3 wt%)
Sung-pyo Lee, Byungjin Hwang, Yeong-Kyeun Paek (Andong Nat’l Univ., Korea), Sung-Ho Yang, Sunkwon Lim (Heesung Metal Ltd., Korea), Won-Seon Seo (KICET, Korea), and Kyung-Sik Oh (Andong Nat’l Univ., Korea)
[ThA1] 08:40~10:10 p120
Silicon CeramicsSession Chairs : Dr. Jose Lemus-Ruiz (Universidad Michoacana de San Nicolas de Hidalgo, Mexico)Prof. Suk-Joong L. kang (KAIST, Korea)
ThA1-1 08:40~09:00
Study of Low Temperature Silica Sintering
Lucie Nguyen, Alexandre Maitre, Martine Lejeune, and Claire Santerne (SPCTS, France)
ThA1-2 09:00~09:30
[Invited] Role of Sintering Additives on Functionality of Silicon Carbide Ceramics
Young-Wook Kim (Univ. of Seoul, Korea) and Kwang Joo Kim (Konkuk Univ., Korea)
ThA1-3 09:30~09:50
Engineered Multifunctional CNT/Silicon Nitride Nanocomposites
C. Balázsi (Hungarian Academy of Sciences, Hungary)
ThA1-4 09:50~10:10
Spark Plasma Sintering of α-Si3N4 Ceramics
L. Ceja-Cárdenas, J. Lemus-Ruiz, A. Reyes (Universidad Michoacana de San Nicolas de Hidalgo, Mexico), and S. D. de la Torre (Instituto Politécnico Nacional, Mexico)
September 1, 2011 (Thu.)
I n t e r n a t i o n a l C o n f e r e n c e o n S i n t e r i n g 2 0 1 1
30
Ⅳ TECHNICAL PRoGRAM
3. Technical Program
Room A (Lotus Hall 1) Room B (Lotus Hall 2) Room C (Lotus Hall 3)
September 1, 2011 (Thu.)
[ThC2] 10:30~11:50 p128
Two-step SinteringSession Chairs : Prof. Young-Wook Kim (Univ. of Seoul, Korea)Dr. Karel Maca (Brno Univ. of Tech., Czech Republic)
ThC2-1 10:30~10:50
The Influence of Heating Profiles on Microstructure of Sintered Ceramics
K. Maca, V. Pouchly (Brno Univ. of Tech., Czech Republic) and Z.-J. Shen (Stockholm Univ., Sweden)
ThC2-2 10:50~11:10
Difficulty in Sintering of K0.5Na0.5NbO3 Ceramics
Gulcan Corapcioglu, and Mehmet Ali Gulgun (Sabanci Univ., Turkey)
ThC2-3 11:10~11:30
Densification of uO2 via Two-Step Sintering
J. Vidal, M. Zemek (Areva NP, Germany) and P. Blanchart (Ecole Nationale Supérieure de Céramique Industrielle., France)
ThC2-4 11:30~11:50
Microstructure Evolution during Two-Stage Sintering of Sodium Niobate
Jurij Koruza, Barbara Malič, Gregor Trefalt, and Marija Kosec (Jožef Stefan Inst., Slovenia)
[ThB2] 10:30~12:10 p126
Electrical, Optical, Thermal ApplicationsSession Chairs : Dr. SungMin Lee (KICET, Korea)Dr. Sha Ma (Nat’l Univ. of Singapore, Singapore)
ThB2-1 10:30~10:50
Electrical Properties of Al2O3 and Y2O3 Ceramics with the Addition of Carbon
Kwan-Young Choi, Sung-Min Lee, Seongwon Kim, Yoon-Suk Oh, and Hyung-Tae Kim (KICET, Korea)
ThB2-2 10:50~11:10
Changes of Effective Thermal Conductivity by Neck Evolution during Sintering Process
Hyun Min Jang and J. Yoon Choi (Korea Conformity Lab., Korea)
ThB2-3 11:10~11:30
Influence of Dopants on the Translucency of Sintered Alumina
S. Ma, J. Y. H. Fuh, and L. Lu (Nat’l Univ. of Singapore, Singapore)
ThB2-4 11:30~11:50
Densification of Yttrium Aluminum Garnet (YAG) Towards Optical Transparency
HeeDong Lee, Kristin Keller (UES, Inc., USA), Han-Ho Choi (Philips-Lumiled Lighting Co., USA), Brian Sirn, and Mikiyas Barkneh (UES, Inc., USA)
ThB2-5 11:50~12:10
Sintering of Multi-layer Nd: YAG Ceramics
Yihua Huang and Dongliang Jiang (Shanghai Inst. Of Ceramics, China)
[ThA2] 10:30~12:20 p124
Sintering Behavior - Metals IISession Chairs : Prof. Yuehui He (Central South Univ., China)Dr. Jung-Sik Kim (Loughborough Univ., UK)
ThA2-1 10:30~11:00[Invited] Fabrication and Applications of Intermetallic Porous Materials by Controlled Actively Sintering Process
He Yuehui, Lin Nan, C. T. Liu, and Jiang Yao (Central South Univ., China)
ThA2-2 11:00~11:20Sintering Process of Three-dimensional Microcomponents from Waste NdFeB-type Magnets
Jung-Sik Kim (Loughborough Univ., UK) and Miha Zakotnik (Univ. of Birmingham, UK)
ThA2-3 11:20~11:40The Effects of Sample Position and Gas Flow on the Sintering of a 7xxx Aluminium Alloy
X. N. Yuan, S. H. Huo, S. Aminossadati, G. B. Schaffer, and M. Qian (The Univ. of Queensland, Australia)
ThA2-4 11:40~12:00Effect of B4C Reinforcement Size on Microstructure and Mechanical Properties of Magnesium Matrix Composites Manufa-ctured by Powder Metallurgy Method
L. Feray Guleryuz, Sertan Ozan (Ege Univ., Turkey), Deniz Uzunsoy (Yildiz Technical Univ., Turkey), and Rasim Ipek (Ege Univ., Turkey)
ThA2-5 12:00~12:20
Particle Size Effect on Sintering Behavior of 316L and 17-4 PH Stainless Steel Powders
Dong Yong Park (POSTECH, Korea), Young-Sam Kwon (CetaTech, Korea), S. Woo Lee, Seong Jin Park (POSTECH, Korea), and Isamu Otsuka (Epson Atmix Corporation, Japan)