Technical Profi le GSP frames I & II - HMD KONTRO
4
Pump model 1 1.5 x 1 x 6* 2 3 x 1.5 x 6H 3 3 x 2 x 6 4 4 x 3 x 6 5 1.5 x 1 x 8* 6 3 x 1.5 x 8H* 7 3 x 2 x 8 8 4 x 3 x 8H 9 6 x 4 x 8H 10 2 x 1 x 10* 11 3 x 1.5 x 10 12 3 x 2 x 10 13 4 x 3 x 10H 14 6 x 4 x 10 15 2 x 1 x 13 16 3 x 1.5 x 13 17 3 x 2 x 13 18 4 x 3 x 13 19 6 x 4 x 13 * Includes low flow hydraulic options Technical Profile GSP frames I & II Magnet drive, end suction, centrifugal pumps to API 685 (2nd edition) The GSP is a heavy-duty centreline-mounted process pump that complies with API 685 and refinery applications for sealless pumps. The GSP product covers a hydraulic range that is split between four frame sizes, Frames I, II, III & IV. The pumps are offered with a range of Synchronous Magnet Drives rated to match prime mover performance. A corresponding range of Torque Ring drives is available for high temperature operation. Prime mover specifications of all denominations can be catered for. The standard materials of construction are A8 and S5 with silicon carbide internal bearings. Performance of the GSP frames I & II Design range limits The GSP pump is designed to operate from -40°F up to 660°F, -40°C up to 350°C without the need for any ancillary cooling medium. Design working pressure is 580 psi, 40 bar. Solids handling capability The unit is capable of handling solids up to 5% w/w less than 150 microns. Options Materials of construction Wetted parts Alloy 20, Alloy C276 Internal bearings SiC / Carbon Gasket PTFE Other options Casing drains flanged or screwed Jacketed pump casing Torque ring drive Secondary Control Coupling housing drain Full range of pump protection
Transcript of Technical Profi le GSP frames I & II - HMD KONTRO
Pump model1 1.5 x 1 x 6*2 3 x 1.5 x 6H3 3 x 2 x 64 4 x 3 x 65 1.5 x 1 x 8*
6 3 x 1.5 x 8H*7 3 x 2 x 88 4 x 3 x 8H9 6 x 4 x 8H10 2 x 1 x 10*
11 3 x 1.5 x 1012 3 x 2 x 1013 4 x 3 x 10H14 6 x 4 x 1015 2 x 1 x 13
16 3 x 1.5 x 1317 3 x 2 x 1318 4 x 3 x 1319 6 x 4 x 13
* Includes low fl ow hydraulic options
Technical Profi le
GSP frames I & IIMagnet drive, end suction, centrifugal pumpsto API 685 (2nd edition)
The GSP is a heavy-duty centreline-mounted process pump that complies with API 685 and refi nery applications for sealless pumps. The GSP product covers a hydraulic range that is split between four frame sizes, Frames I, II, III & IV.
The pumps are offered with a range of Synchronous Magnet Drives rated to match prime mover performance. A corresponding range of Torque Ring drives is available for high temperature operation. Prime mover specifi cations of all denominations can be catered for.
The standard materials of construction are A8 and S5 with silicon carbide internal bearings.
Performance of the GSP frames I & II Design range limitsThe GSP pump is designed to operate from -40°F up to 660°F, -40°C up to 350°C without the need for any ancillary cooling medium. Design working pressure is 580 psi, 40 bar.
Solids handling capabilityThe unit is capable of handling solids up to 5% w/w less than 150 microns.
Options
Materials of constructionWetted parts Alloy 20, Alloy C276 Internal bearings SiC / CarbonGasket PTFE
Other optionsCasing drains fl anged or screwedJacketed pump casingTorque ring driveSecondary ControlCoupling housing drainFull range of pump protection
Flanges and Connections
Key Design Features No seals: To minimize maintenance, all of the associated costs and eliminate potential leaks.
Sealless design: For total containment, essential for hazardous, aggressive or valuable product.
Interchangeability of components: For maximum convenience and reduced stock holding, operator training etc.
High effi ciency wet end: To benefi t maximum fl ow / head coverage.
Wide choice of materials: To allow a choice of metallurgy to suit the applications requirements.
Casing gasket fully confi ned: So eliminating risk of blowout.
Universal connection options: So that suction and discharge fl ange connections can be confi gured to your exact requirements.
Modular rotating element cartridge: Providing the most effi cient way to perform replacements and manage your spare part inventory.
Casing
Suction and discharge fl anges are designed in accordance with the following relevant standards:
ASME B16.5 Machined with 0.06” (1.5mm) high raised Class 300 face having a continuous spiral groove.
DIN 2545 Machined with 2mm high raised facePN40 with a continuous spiral groove. (Note: these fl anges are identical to BS 4504 PN40).
Benefi ts of GSP pump range Conforms to API 685 for sealless pumps.
Design ensures safe, leak free operation.
Increased effi ciency, low running costs.
Minimal spares holding and maintenance.
Maximizes on-line process time.
No costly seal support systems to
maintain.
Reduced installation costs.
10 10A 50 60 70 8090 100130170170B200220360370390410430440510610620670680700700A8608905020****
Neck Ring [Front]Neck Ring [Back]Coupling WasherImpellerFront Thrust WasherBack Thrust WasherBush HolderBushThrust PadCasing Gasket‘O’ RingContainment Shroud Rear Bush HousingCoupling NutInner Magnet RingSupport GasketCasingCoupling HousingBump RingOuter Magnet RingBearing HousingDrive ShaftFront CapBack CapLabyrinth Seal [Kit]Sec. Containment SealShaft SleeveBreatherRaceFixings [Kit]
Stainless Steel Stainless Steel Stainless Steel Stainless Steel Alpha SiC Alpha SiC Stainless Steel Alpha SiC Alpha SiC CSFViton AAlloy C & SSStainless Steel Stainless Steel Stainless SteelExfoliated Graphite & SSStainless SteelCarbon SteelPhosphor BronzeCarbon SteelCarbon SteelCarbon SteelCarbon SteelCarbon SteelBrassProprietaryAlpha SiCStainless SteelSteelVarious
Construction of GSP frames I & II
Flange LoadingsAllowable fl ange loadings imposed by pipework are in accordance with Table 4 of API 685 2nd edition.
Drain ConnectionsThe following drain options are available:Standard: Socket welded fl anged drain rated to the casing fl anges,
fully braced in 2 planes.Option 1: 3/8” BSP drain plug fi tted with fully trapped gasket.Option 2: 1/2” NPT plug.Option 3: No drain.
Gauge Connections:Suction and discharge fl anges are fi tted with bosses suitable for drilling.
Dimensions of GSP frames I & II Dimensions are for guidance only
Sundyne Headquarters:Sundyne, LLC14845 West 64th AvenueArvada, Colorado 80007USA1-866-SundynePhone: 1 303 425 0800Fax: 1 303 940 2911www.sundyne.com
Sundyne United Kingdom:Sundyne HMD Kontro Sealless Pumps Marshall RoadHampden Park Industrial EstateEastbourne East Sussex, BN22 9ANUnited KingdomPhone: +44 (0)1323 452000Fax: +44 (0)1323 503369
Sundyne China:Sundyne Industrial Equipment (Tianjin) Company LimitedBuilding 1, No. 879 Shen Fu RoadXinZhuang Industrial ZoneMin Hang DistrictShangai, China 201108Phone: +86 21 5055 5005Fax: +86 21 5442 5265
Sundyne France:Sundyne International S.A.13-15, Bld. Eiffel - B.P. 30 21604 Longvic CedexFrancePhone: +33 (0)3 80 38 33 00Fax: +33 (0)3 80 38 33 66
Sundyne Spain:Sundyne Marelli Bombas, S.R.L.Ctra. Madrid-Toledo, Km.30.845200 IllescasToledo, SpainPhone: +34 925 53 45 00Fax: +34 925 51 16 00
Worldwide Sales HeadquartersUnit 2 Harvington Business ParkBrampton RoadHampden Park Industrial EstateEastbourne East Sussex, BN22 9BNUnited KingdomPhone: +44 (0)1323 452125
All information provided is subject to change without notice.
© 2014 Sundyne, LLCAll Rights Reserved. Other logos and trade names are property of their respective owners.
Sundyne HMD Kontro GSP 2.0 2.0 9/16 Letter
