Technical Polyurethane Mouldings

BMP Proteus Technical Polyurethane Mouldingsfor the Offshore Renewables Industry

BMP ASIA INDUSTRIES(Shenzhen) Company Ltd

No 1, Fengmen Industrial Area Fenghuang Road

Egongling, Ping HuLonggang, ShenzhenGuangdong 518111

P.R.China

t: +86 75 58 46 53 140f: +86 75 58 46 53 142e: info@bmp-asia.com

BMP ASIA INDUSTRIES(Singapore) Company Ltd

541 Orchard Road#19-01A, Liat Towers

238881 Singapore

t: +65 68 87 24 22f: +65 67 38 06 28

e: info@bmp-asia.com

BMP ASIA INDUSTRIES(Shanghai) Company LtdB 3, No 502 Tianying Road

Shanghai QuingpuIndustrial Zone

QuingpuShanghaiP.R.China

t: +86 21 59 22 70 50f: +86 21 59 22 70 52e: info@bmp-asia.com

BMP EUROPE LTDShorten Brook Drive

Altham Business Park Altham, Accrington

BB5 5YHUnited Kingdom

t: +44 1282 772000f: +44 1282 777700

e: info@bmpeurope.com

BMP AMERICA INC11625 Maple Ridge Road

MedinaNew York 14103

USA

t: +1 585 798 0950f: +1 585 798 4272

e: info@bmpamerica.com

BMP MEXICOCalle Circuito Intermex Sur #1511Parque Industrial Intermex Sur Cd.

JuarezChihuahua CP 32575

Mexico

t: +52 656 621 5180f: +52 656 621 5181

e: info@bmpamerica.com

www.bmpworldwide.com

BMP Global Contacts

Dynamic bend stiffeners are designedto limit bending stresses and excessive

curvature of cables by adding localised stiffness at the point of

contact with a rigid structure.

Dynamic Bend Stiffener

ProShell cable protection is utilisedwhen additional shielding of cables is required, such as at touchdown

points, and over rocky terrain.

ProShell Cable Protection

HydraThane is a unique hydrophilicpolyurethane material which has a

swell ratio of up to 400% when exposed to seawater, yielding unique

sealing properties

HydraThane XP Seals

Bend restrictors comprise of an interlocking vertebrae system,

which prevents the over bending ofcables or umbilicals, due to a specific ‘lock-up’ radius and maximum load

bearing capacity.

Bend Restrictor

Seabed Protection Mats are employedat intersection point s and over rough

terrain, providing protection and stability to the cables

Seabed Protection Mat

Piggyback Clamps are utilised whensmaller secondary cables or pipes require support when attached to

a main carrier pipeline.

Piggyback Clamp

Static Bend Stiffeners are designed tocontrol the minimum bend radius of acable or umbilical, providing overbendprotection during installation and for

applications on the sea bed.

Static Bend Stiffener

J-Tube Seals provide a permanent sealbetween the J-Tube and a newly

installed cable /umbilical, providing an annulus which can be treated

with a corrosion inhibitor.

J-Tube Seal

Vibration dampers are located in the rotor blade tip, and maximise

performance of the blade by limitinglateral stresses.

Vibration Damper

Bend Protectors are designed to addstiffness to cables and umbilicals.

Bend Protector

Balancing Blocks optimise the performance of a wind turbine blade

by preventing excessive vibration generation.

Balancing Block

Titan Main Bearing Seals are manufactured from a hard, abrasion

resistance polyurethane system, and can be moulded in sizes up to

2 metres in diameter.

Titan Main Bearing Seals

Proteus is the new generation of technical polyurethane products from BMPwhich address the demanding requirements of the renewables market sector.Designed to withstand the rigours of offshore and submarine enviroments,BMP’s Proteus range focuses on cable protection systems, including Pro-Shell,bend restrictors, bend stiffeners and J-tube seals, together with specialitymouldings utilised inside wind turbine nacelles and rotor blades.

Technical Polyurethane Mouldings