EKG Overview. Heart Walls Inferior Wall Septal Wall Anterior Wall Lateral Wall Posterior Wall.
TECHNICAL INFORMATION - Octanorm...
23
TECHNICAL INFORMATION OCTANORM CLEANROOM SYSTEMS Wall system A2 Wall system B2 Wall system C2 Wall system D2 ELECTRONIC AND SEMICONDUCTOR Double wall systems
Transcript of TECHNICAL INFORMATION - Octanorm...
T E C H N I C A L I N F O R M A T I O NOCTANORM CLEANROOM SYSTEMS
Wal l system A2
Wal l system B2
Wal l system C2
Wal l system D2
E L E C T R O N I C A N D S E M I C O N D U C T O R
Do u b l e w a l l s y s t ems
T E C H N I C A L D A T A S H E E TW A L L T Y P E A 2
Double wall system, two-sided flush, without panel division
Surface ofbeam / extrusion
Aluminium,anodized, E6 EV 1
Panel Sandwich elements 36 mm with AL-covers 0,8 mm
Standard filling Polyurethane foam
Standard grid 1200 mm
Standard color RAL 9010
Wall height from 2000 mm
Max. wall height 3000 mm
Panel variations Sandwich elements, 36 mm with steel sheet panels 1,0 mm and rock wool filling or AL-covers 0,5 mm and AL-honeycomb-intermediate layer
others on request
Horizontal Section Horizontalschnitt
1 A4
Horicontal section double wall panel / Horizontalschnitt 2-schalige Wand
Z-Nr: VRS_E40_12_0001
Status Änderungen Datum Name
Gezeichnet
Kontrolliert
Norm
Datum Name
19.09.2007 le
Alle Toleranzen nach DIN ISO 2768 mittel
Projekt Nr.
This drawing is our literary property and may neither copied nor to be exposed approchable to third persons without our agreement; according to German Copyright Act
Material
Description / Bezeichnung:
2-schaliges Paneeldouble panel
C 162 HalteprofilC 162 panel retainer extrusion
Adapterprofil C 160Adapter Extrusion C 160
Vertical section Vertikalschnitt
1 A4
Ceiling connection double wall / Deckenanschluss 2-schalige Wand
Z-Nr: VRS_E40_21_0000
Status Änderungen Datum Name
Gezeichnet
Kontrolliert
Norm
Datum Name
19.09.2007 le
Alle Toleranzen nach DIN ISO 2768 mittel
Projekt Nr.
This drawing is our literary property and may neither copied nor to be exposed approchable to third persons without our agreement; according to German Copyright Act
Material
Description / Bezeichnung:
2-schaliges Paneeldouble panel
C 130 Boden U-ProfilC 130 Floor U-Channel Extrusion
Z 961-13 Spannschloss 13 mmZ 961-13 Tension lock 13 mm
C 100 ZargenprofilC 100 Beam Extrusion
Vertical SectionVertikalschnitt
1 A4
Floor connection double wall / Bodenanschluss 2-schaligeWand
Z-Nr: VRS_E40_21_0001
Status Änderungen Datum Name
Gezeichnet
Kontrolliert
Norm
Datum Name
19.09.2007 le
Alle Toleranzen nach DIN ISO 2768 mittel
Projekt Nr.
This drawing is our literary property and may neither copied nor to be exposed approchable to third persons without our agreement; according to German Copyright Act
Material
Description / Bezeichnung:
2-schaliges PaneelDouble panel
C 105 ZargenprofilC 105 Beam extrusion
C 130 Boden U-ProfilC 130 floor U-Chanel extrusion
T E C H N I C A L D A T A S H E E T W A L L T Y P E B 2
Double wall system, two-sided flush, with panel division
Surface of beam / extrusion
Aluminium,anodized, E6 EV 1
Panel Sandwich elements 36 mm with AL-covers 0,8 mm
Standard filling Polyurethane foam
Standard grid 1200 mm
Standard color RAL 9010
Wall height from 2000 mm
Max. wall height 4500 mm
Panel variations Sandwich elements, 36 mm with steel sheet panels 1,0 mm and rock wool filling or AL-covers 0,5 mm and AL-honeycomb-intermediate layer
others on reqeust
Horizontal Section Horizontalschnitt
1 A4
Horicontal section double wall panel / Horizontalschnitt 2-schalige Wand
Z-Nr: VRS_E40_12_0001
Status Änderungen Datum Name
Gezeichnet
Kontrolliert
Norm
Datum Name
19.09.2007 le
Alle Toleranzen nach DIN ISO 2768 mittel
Projekt Nr.
This drawing is our literary property and may neither copied nor to be exposed approchable to third persons without our agreement; according to German Copyright Act
Material
Description / Bezeichnung:
2-schaliges Paneeldouble panel
C 162 HalteprofilC 162 panel retainer extrusion
Adapterprofil C 160Adapter Extrusion C 160
Vertical section Vertikalschnitt
1 A4
Ceiling connection double wall / Deckenanschluss 2-schalige Wand
Z-Nr: VRS_E40_21_0000
Status Änderungen Datum Name
Gezeichnet
Kontrolliert
Norm
Datum Name
19.09.2007 le
Alle Toleranzen nach DIN ISO 2768 mittel
Projekt Nr.
This drawing is our literary property and may neither copied nor to be exposed approchable to third persons without our agreement; according to German Copyright Act
Material
Description / Bezeichnung:
2-schaliges Paneeldouble panel
C 130 Boden U-ProfilC 130 Floor U-Channel Extrusion
Z 961-13 Spannschloss 13 mmZ 961-13 Tension lock 13 mm
C 100 ZargenprofilC 100 Beam Extrusion
Vertical SectionVertikalschnitt
1 A4
Floor connection double wall / Bodenanschluss 2-schaligeWand
Z-Nr: VRS_E40_21_0001
Status Änderungen Datum Name
Gezeichnet
Kontrolliert
Norm
Datum Name
19.09.2007 le
Alle Toleranzen nach DIN ISO 2768 mittel
Projekt Nr.
This drawing is our literary property and may neither copied nor to be exposed approchable to third persons without our agreement; according to German Copyright Act
Material
Description / Bezeichnung:
2-schaliges PaneelDouble panel
C 105 ZargenprofilC 105 Beam extrusion
C 130 Boden U-ProfilC 130 floor U-Chanel extrusion
Vertical SectionVertikalschnitt
1 A4
Vertical section wall with double panel / Vertikalschnitt 2-schalige Wand
Z-Nr: VRS_E40_21_0002
Status Änderungen Datum Name
Gezeichnet
Kontrolliert
Norm
Datum Name05.10.2007 le
Alle Toleranzen nach DIN ISO 2768 mittel
Projekt Nr.
This drawing is our literary property and may neither copied nor to be exposed approchable to third persons without our agreement; according to German Copyright Act
Material
PRO
Bezeichnung:
2-schaliges Paneel
double panel
2-schaliges Paneeldouble panel
T E C H N I C A L D A T A S H E E T W A L L T Y P E C 2
Double wall system, two-sided flush, without panel division
Surface ofbeam / extrusion
Aluminium, anodized, E6 EV 1
Panel 2 x aluminium composite panel 6 mm
Standard filling none
Standard grid 1200 mm
Standard color white
Wall height from 2000 mm
Max. wall height 3000 mm
Panel variations on request
Vertical sectionVertikalschnitt
1 A4
Ceiling connection, double wall panel/ Deckenanschluss, 2-schaliges Wandpaneel
Z-Nr:VRS_E40_41_0001
Status Änderungen Datum Name
Gezeichnet
Kontrolliert
Norm
Datum Name
09.12.2014 jk
Alle Toleranzen nach DIN ISO 2768 mittel
Projekt Nr.
This drawing is our literary property and may neither copied nor to be exposed approchable to third persons without our agreement; according to German Copyright Act
Material
Description / Bezeichnung:
C 130 Boden U-ProfilC 130 Floor U-Channel extrusion
C 100 ZargenprofilC 100 Beam extrusion
C 155 DistanzprofilC 155 Spacing extrusion
C 161 HalteprofilC 161 Panel retainer extrusion
C 160 AdapterprofilC 160 Adaptor extrusion
Vertical sectionVertikalschnitt
1 A4
Floor connection, double wall/ Bodenanschluss, 2-schaliges Wandsystem
Z-Nr:VRS_E40_41_0003
Status Änderungen Datum Name
Gezeichnet
Kontrolliert
Norm
Datum Name
09.12.2014 jk
Alle Toleranzen nach DIN ISO 2768 mittel
Projekt Nr.
This drawing is our literary property and may neither copied nor to be exposed approchable to third persons without our agreement; according to German Copyright Act
Material
Description / Bezeichnung:
C 826-4 Aluminium-VerbundelementC 826-4 Aluminium composite
C 161 HalteprofilC 161 Panel retainer extrusion
C 155 DistanzprofilC 155 Spacing extrusion
C 110 ZargenprofilC 110 Beam extrusion
C 160 AdapterprofilC 160 Adaptor extrusion
C 130 Boden U-ProfilC 130 Floor U-channel extrusion
Horizontal sectionHorizontalschnitt
1 A4
Horizontal section, double wall/ Horizontalschnitt, 2-schaliges Wandsystem
Z-Nr:VRS_E40_42_0000
Status Änderungen Datum Name
Gezeichnet
Kontrolliert
Norm
Datum Name
09.12.2014 jk
Alle Toleranzen nach DIN ISO 2768 mittel
Projekt Nr.
This drawing is our literary property and may neither copied nor to be exposed approchable to third persons without our agreement; according to German Copyright Act
Material
Description / Bezeichnung:
C 826-4 Aluminium-VerbundelementC 826-4 Aluminium composite
C 161 HalteprofilC 161 Panel retainer extrusion
C 160 AdapterprofilC 160 Adaptor extrusion
C 155 DistanzprofilC 155 Spacing extrusion
C 125 StützenprofilC 125 Upright extrusion
T E C H N I C A L D A T A S H E E TW A L L T Y P E D 2
Double wall system, two-sided flush, with panel division at 2170 mm wall height
Surface of beam / extrusion
Aluminium,anodized, E6 EV 1
Panel 2 x aluminium composite panel 6 mm
Standard filling none
Standard grid 1200 mm
Standard color white
Wall height from 2000 mm
Max. wall height 4500 mm
Panel variations on request
Vertical sectionVertikalschnitt
1 A4
Ceiling connection, double wall panel/ Deckenanschluss, 2-schaliges Wandpaneel
Z-Nr:VRS_E40_41_0001
Status Änderungen Datum Name
Gezeichnet
Kontrolliert
Norm
Datum Name
09.12.2014 jk
Alle Toleranzen nach DIN ISO 2768 mittel
Projekt Nr.
This drawing is our literary property and may neither copied nor to be exposed approchable to third persons without our agreement; according to German Copyright Act
Material
Description / Bezeichnung:
C 130 Boden U-ProfilC 130 Floor U-Channel extrusion
C 100 ZargenprofilC 100 Beam extrusion
C 155 DistanzprofilC 155 Spacing extrusion
C 161 HalteprofilC 161 Panel retainer extrusion
C 160 AdapterprofilC 160 Adaptor extrusion
Vertical SectionVertikalschnitt
1 A4
Vertical section, double wall/ Vertikalschnitt, 2-schaliges Wandsystem
Z-Nr:VRS_E40_41_0002
Status Änderungen Datum Name
Gezeichnet
Kontrolliert
Norm
Datum Name
09.12.2014 jk
Alle Toleranzen nach DIN ISO 2768 mittel
Projekt Nr.
This drawing is our literary property and may neither copied nor to be exposed approchable to third persons without our agreement; according to German Copyright Act
Material
Description / Bezeichnung:
C 826-4 Aluminium-VerbundelementC 826-4 Aluminium composite
C 826-4 Aluminium-VerbundelementC 826-4 Aluminium composite
C 120 ZargenprofilC 120 Beam extrusion
C 161 HalteprofilC 161 Panel retainer extrusion
C 160 AdapterprofilC 160 Adaptor extrusion
C 155 DistanzprofilC 155 Spacing extrusion
Vertical sectionVertikalschnitt
1 A4
Floor connection, double wall/ Bodenanschluss, 2-schaliges Wandsystem
Z-Nr:VRS_E40_41_0003
Status Änderungen Datum Name
Gezeichnet
Kontrolliert
Norm
Datum Name
09.12.2014 jk
Alle Toleranzen nach DIN ISO 2768 mittel
Projekt Nr.
This drawing is our literary property and may neither copied nor to be exposed approchable to third persons without our agreement; according to German Copyright Act
Material
Description / Bezeichnung:
C 826-4 Aluminium-VerbundelementC 826-4 Aluminium composite
C 161 HalteprofilC 161 Panel retainer extrusion
C 155 DistanzprofilC 155 Spacing extrusion
C 110 ZargenprofilC 110 Beam extrusion
C 160 AdapterprofilC 160 Adaptor extrusion
C 130 Boden U-ProfilC 130 Floor U-channel extrusion
Horizontal sectionHorizontalschnitt
1 A4
Horizontal section, double wall/ Horizontalschnitt, 2-schaliges Wandsystem
Z-Nr:VRS_E40_42_0000
Status Änderungen Datum Name
Gezeichnet
Kontrolliert
Norm
Datum Name
09.12.2014 jk
Alle Toleranzen nach DIN ISO 2768 mittel
Projekt Nr.
This drawing is our literary property and may neither copied nor to be exposed approchable to third persons without our agreement; according to German Copyright Act
Material
Description / Bezeichnung:
C 826-4 Aluminium-VerbundelementC 826-4 Aluminium composite
C 161 HalteprofilC 161 Panel retainer extrusion
C 160 AdapterprofilC 160 Adaptor extrusion
C 155 DistanzprofilC 155 Spacing extrusion
C 125 StützenprofilC 125 Upright extrusion
![Untitled-1 [] · 2020-01-29 · STOLAC "Octanorm" SOL "Octanorm" "Octanorm" CHAIR "Octanorm" TABLE 80/120 80 BAR-STOLAC BAR-STOOL 1680 0280 120 L HLADNJAK REFRIGERATOR 100 70 H=70](https://static.fdocuments.us/doc/165x107/5e57a277b2864f5dd55518bb/untitled-1-2020-01-29-stolac-octanorm-sol-octanorm.jpg)
