Technical Features S M elbo controlli file1 LAN networking port and Wireless connetion (Wi-Fi 802.11...
Transcript of Technical Features S M elbo controlli file1 LAN networking port and Wireless connetion (Wi-Fi 802.11...
SOFTWARE
Td SIX is a new software function
developed by Elbo Controlli NIKKEN,
used to acquire tool's measurements,
to input them into the tooling tables
and create a file including
tools offstes
Inspection function for
accurate control of the tool status.
Possibility to increase or decrease
the brightness for a better visibility.
4 different coloured filters to
highlight tool damages
The datas are elaborated and
post-processed by the software.
There are more than
50 post-processor format for the
most common numerical controls
available on machine tool market
Autofocus function: all new operating
mode and capability that allows the
machine to measure automatically the
tools, without operator presence.
Possibility to acquire X and Z values with
automatic recognition of the cutting edge
Technical Features MECHANICS
ELECTRONICS - OPTICS
SOFTWARE
OPTIONAL
● Dymo label printer
● Measuring range: diameter max 600 mm (radius 300 mm); height max 800 mm● Monoblock machine structure in steel, floor mounted with 4 vibration damper adjistable supports ● Base and column made of ground granite certified with Taylor Hobson ris.1 µm/m electronic millesimal level ● ELBO CONTROLLI linear transducers in optical glass with ground granite support type SLIDE GS371 certified HP laser with axes resolution: X = 1 µm, Z = 1 µm● ISO/BT/HSK/VDI … etc. interchangeable rotating spindle-holder (to be selected) max run-out error < 2 µm● Spindle index in four angular positions: 0°-90°-180°-270°● C axis visualization: angular position of the spindle-holder with 0.01° resolution● Motor providing automatic rotation of the spindle with pneumatic engagement of the motion transmission for zero backlash (patented system)● Spindle-holder identification system (SP-ID) with NFC technology to automatically identify the spindle-holder after each replacement● Spindle index in four angular positions: 0°-90°-180°-270° ● Double vault arc prismatic slideways: two for X axis slideways, one for Z axis slideways● Double re-circulating ball bearing slides (four in total), lubricated for life (preloading slides/slideways: P/H class) ● Universal motorized mechanic tool clamping (ISO/BT/HSK tools to be specified)● Pneumatic braking of the spindle-holder rotation with 3 pistons at 120°● Vision system weight balancing set with double spiral spring● Motorized axes movement● Control panel with micrometic handwheel and rapid movement buttons (3 m/mm) ● Overall dimensions: L = 1700 mm, H = 2300 mm, D = 700 mm● Net weight: ~ 550 Kg
● Vision system for tool measuring and cutting inspection● C-MOS sensor framed image area 6,4 x 6,4 mm● 30X magnification● Bi-telecentric lens● Red light episcopic leds illuminator with ring lens, red light diascopic led puntiform illuminator● TFT 15” touch screen monitor ● Intel Apollo Lake processor● UBUNTU LINUX 18.04 LTS operationg system● Data storage on solid state disk SSD● 4 USB ports● 1 LAN networking port and Wireless connetion (Wi-Fi 802.11 150 Mb/s)
● CNC machine origin and adapter management● Tool creation list and/or single tool● Automatic change of CNC machine origin allocation● Td SIX (Tool data SIX)● Spindle-holder auto rotation with automatic tool measurement cycles for single cutter or multi edged cutter ● Peripheral speed of the spindle rotation is calculated and controlled based on the diameter of the current tool being measured● TLA technology (Tool Link App) for tool data transmission directly to numerical control memory (DNC) ● Ready for TID infrastructure for tool identification with Datamatrix code ● Tools set and Post Processor universal creator● Magnetic chip code-holders (Balluff for example, hardware not included)● Printable tool set report● Theroetical measurement and tolerance management
20821 MEDA (MB) - Italy - Via San Giorgio, 21T. +39 0362 342745 - F. +39 0362 342741www.elbocontrolli.com - [email protected]
elbo controlli Distribuited by
SPECIFICATIONS SUBJECT CHANGE WITHOUT PRIOR NOTICE
elbo controllirock solid measurement
68
INDUSTRY 4.0READY
MECCANICA ELETTRONICA - OTTICA SOFTWARE
by elbo controlli
MECCANICA
MECCANICA
ELETTRONICA - OTTICA
MECCANICA
MECCANICA
MECCANICA
ELETTRONICA - OTTICA
SOFTWARE
86 Il preset E68BA e’ equipaggiato, sia per l’asse x che per l’asse z, con
righe ottiche in granito naturale e vetro.
unica riga al mondo ad utilizzare il granito come struttura di supporto,
garantisce un’accuratezza e una precisione mai raggiunte finora
I movimenti micrometrici (volantini elettronici), sono utilizzati per la
collimazione del profilo utensile e l’acquisizione della misura
Molta attenzione è stata posta nello studio della struttura e nel
dimensionamento della base. La macchina risulta pertanto
estremamente rigida e garantisce precisione ed indeformabilità
Ampio display touch-screen da 15” per un ottimale visualizzazione degli
utensili ed una semplice gestione delle funzioni macchina
AF
Granito naturale impiegato sia per la colonna che per la base, con sezione
maggiorata rispetto ai modelli precedenti. La stabilità termica di questo materiale,
permette di collocare la macchina in officina
Sistema telecamera con dimensioni aumentate per consentire una
misurazione di diametri fino a 800 mm. Ottiche telecentriche con maggior
rapporto di ingrandimento e distanza focale aumentata
Corpo mandrino a doppia gabbia di sfere. Mandrino intercambiabile (errore run-out
< 2 µm). Bloccaggio del codolo utensile motorizzato di tipo universale.
Freno pneumatico della rotazione. Index in 4 posizioni angolari
Cassetto estraibile integrato con la struttura macchina, dedicato
all’ alloggiamento dei portamandrini.La posizione nascosta permette di
proteggere i portmandrini aggiuntivi ed evita possibili collisioni