TECHNICAL DATA SHEET - Pico | Lighting · 2018. 5. 30. · P/N: PLL-CLH-75W1A1Y Advantage UL、CUL,...
4
NAME: LED Retrofit Kit P/N: PLL-CLH-75W1A1Y Advantage ● UL、CUL, DLC certificate ● PHILIPS LUMILEDS chip, high CRI. PICO LIGHTING www.picolighting.com TECHNICAL DATA SHEET ● UL、CUL, DLC certificate ● PHILIPS LUMILEDS chip, high CRI. ● 90*150 degree, TYPE Ⅲ. ● Internal driver, input voltage AC100-277V. ● E39、EX39 lamp base. Single SUNON fan. ● Lamp Base: 270 degree rotated. ● Automatically Power-Reducing Function: Power reduces gradually when driver's temperature reaches 50℃. When the heat sink of led reaches 90℃, there will no power reduction any more. And power will reduce to 87% of the origin. ● New style and high efficient wide-range input. ● Long lifespan and good heat dissipation. ● Direct replacement for Metal Halide, easy Installation. ● Fits many different fixtures to replace traditional lamps. LED Retrofit Kit make it simple to replace: parking lot lighting, shoebox lighting, street lighting, flood lighitng, wall pack lighting, and canopy lighting etc. Tel: +1 (201) 939-3500 Fax: +1 (201) 939-4900 E39 EX39 Note：The Letter Y in P/N stands for Lamp base type,“-E”for E39 lamp base,“-EX”for EX39 lamp base.
Transcript of TECHNICAL DATA SHEET - Pico | Lighting · 2018. 5. 30. · P/N: PLL-CLH-75W1A1Y Advantage UL、CUL,...
NAME: LED Retrofit KitP/N: PLL-CLH-75W1A1Y
Advantage
● UL、CUL, DLC certificate● PHILIPS LUMILEDS chip, high CRI.
PICO LIGHTING
www.picolighting.com
TECHNICAL DATA SHEET
● UL、CUL, DLC certificate● PHILIPS LUMILEDS chip, high CRI.● 90*150 degree, TYPE Ⅲ.● Internal driver, input voltage AC100-277V.● E39、EX39 lamp base. Single SUNON fan.● Lamp Base: 270 degree rotated.● Automatically Power-Reducing Function: Power reduces gradually when driver's temperature reaches 50℃. When the heat sink of led reaches 90℃, there will no power reduction any more. And power will reduce to 87% of the origin.● New style and high efficient wide-range input.● Long lifespan and good heat dissipation.● Direct replacement for Metal Halide, easy Installation.● Fits many different fixtures to replace traditional lamps.
LED Retrofit Kit make it simple to replace: parking lot lighting, shoebox lighting, street lighting, flood lighitng, wall pack lighting, and canopy lighting etc.
Tel: +1 (201) 939-3500 Fax: +1 (201) 939-4900
E39 EX39
Note：The Letter Y in P/N stands for Lamp base type,“-E”for E39 lamp base,“-EX”for EX39 lamp base.
Product namePart NoLamp BaseDimension
Color temperatureCRILumenLumen EfficacyInput PowerViewing AngleInput VoltagePFCEquivalentWaterproof Rating
LED BrandLED TypeLED QTYHousingHousing color
Operating TemperatureOperating HumidityStorage TemperatureStorage HumidityApplicationSafety CertificationWarranty Time
PICO LIGHTING
www.picolighting.com
Black+Silver
LUXEON 3030 2D（1.5W）
20％-70％ RH -30℃ TO 80℃10％-75％ RH
Shoeboxes, streetlights, floodlights, wall packs, and canopiesUL、CUL, DLC
5 Years
＞708600-9800 LM115-130 LM/W
75W
Tel: +1 (201) 939-3500 Fax: +1 (201) 939-4900
OTHERS -20℃ TO 45℃
90*150degree(TypeⅢ)AC100-277V 50/60Hz
>0.9
IP51
MATERIALSPHILIPS LUMILEDS
150W CFL，250W MHL/HPS/HID
140 PCSMagnesium Alloy+AL+PC
297*138*87 MM 300*138*87 MM
Technical Characteristic2700-6500K
TECHNICAL DATA SHEET
PRODUCT SPECIFICATIONSLED Retrofit Kit
PLL-CLH-75W1A1-EXPLL-CLH-75W1A1-EE39 EX39
PICO LIGHTING
TECHNICAL DATA SHEETRemark: The testing data comes directly from the product test.
Tel: +1 (201) 939-3500 Fax: +1 (201) 939-4900 www.picolighting.com
Size Qty/ Carton
Net Weight/ Carton
Gross Weight/ Carton
Inner box 340*160*110 MM 1 PC 1.28 KG 1.52 KG
Outer box 660*355*240 MM 8 PCS 10.2 KG 13.1 KG
PICO LIGHTINGTel: +1 (201) 939-3500 Fax: +1 (201) 939-4900 www.picolighting.com
Trouble Shootings
Troubles Check points
Flickering of the lamps Turn off the power and turn on again in 3 minutes. If same phenomena occur, then call agencies
Out of working Please check the connection
● Please turn off power before install or change assembly parts.● The input voltage and lamps should be matched, after connecting the power line, please make sure the wiring section is insulated.● Make sure to remove or bypass the ballast in the fixtures before install the lamps.● Suitable for damp locations. Do not use with dimmers.● Suitable for use in enclosed luminaires, min. lamp compartment dimensions: 420*230*230MM.● No-professionals, must not install and disassemble the lamps.
TECHNICAL DATA SHEETPackage
Notice For User
L
N
Ballast
Capacitor
Ignitor HPS
L
N
Ballast
Capacitor
IgnitorLEDlamp
Replace MHL / HPS
L
N
CFL
Replace CFL
L
N
LEDlamp
MHL
LED Retrofit Kit Into PE bag Into EPE
Into inner boxCover inner boxInto outer boxJoint sealing
