Technical Data Sheet - Esterel · PDF fileTechnical Data Sheet ... National Instruments...
3
Technical Data Sheet SCADE LifeCycle ® 6.4 Technical Data Sheet SCADE LifeCycle 6.4 1 Esterel Technologies’ SCADE LifeCycle is a tool suite for system and software Applications Lifecycle Management (ALM). This product line features application certification plans, requirements traceability management, automatic documentation generation, host and target testing environment, and project monitoring. SCADE LifeCycle extends the functionality of SCADE® products towards full critical applications life cycle management and ensures efficiency, completeness and long-term maintainability of applications developed with the SCADE family of products. With SCADE LifeCycle, all systems and software teams involved in critical applications development can manage and control their design and verification activities across the full life cycle of their SCADE applications. Read more about SCADE LifeCycle: • “ Application Certification Plans ” • “ Requirements Management and Traceability ” • “ Automatic Documentation Generation ” • “ Host and Target Testing Environment ” • “ Web-Based Project Monitoring ” Application Certification Plans SCADE LifeCycle DO-178B and DO-178C Certification Plans provide a set of generic plans supporting the certification of applications developed with SCADE Suite® at Level A and B. Certification Plans contain (non-exhaustive list): • Software Development Plan • Software Verification Plan • Software Configuration Management Plan • Software Quality Assurance Plan • Software Development Standard • Trace Data Generation Procedure • SCADE Traceability Procedure • Model Semantic Check Procedure • Model Report Generation Procedure • C Code Generation Procedure • Compliance Matrix For more information, see the SCADE LifeCycle DO- 178B and DO-178C Certification Plans for SCADE Suite Applications Level A and B technical data sheets. Requirements Management and Traceability SCADE LifeCycle Requirements Management Gateway Complete traceability solution 1 for safety-critical design process with SCADE System®, SCADE Suite, and SCADE Display®: • Capture of requirements and functional tests in a wide array of tools and formats: • Microsoft ® tools: Word, Excel ® , Access ® , Visio ® • Code files (C, C++, test log files) • Technical Communication tools: Adobe ® FrameMaker ® and Acrobat ® PDF • Requirements Management tools: IBM ® Rational ® DOORS ® , Rational RequisitePro ® , 1. Powered by Reqtify® product, a registered trademark of Dassault Systèmes or its subsidiaries in the USA and/or other countries. Downstream Information (N+1) = What is covering the selection in the central column Current Selection (Level N) Central Column contains all documents Upstream Information (N-1) = What is covered by selection in the central column
Transcript of Technical Data Sheet - Esterel · PDF fileTechnical Data Sheet ... National Instruments...
Technical Data Sheet
SCADE LifeCycle® 6.4
Technical Data Sheet
SCADE LifeCycle 6.4 1
��������������������
Esterel Technologies’ SCADE LifeCycle is a tool suite for system and software Applications Lifecycle Management (ALM).
This product line features application certification plans, requirements traceability management, automatic documentation generation, host and target testing environment, and project monitoring.
SCADE LifeCycle extends the functionality of SCADE® products towards full critical applications life cycle management and ensures efficiency, completeness and long-term maintainability of applications developed with
the SCADE family of products. With SCADE LifeCycle, all systems and software teams involved in critical applications development can manage and control their design and verification activities across the full life cycle of their SCADE applications.
Read more about SCADE LifeCycle:
• “Application Certification Plans”• “Requirements Management and Traceability”• “Automatic Documentation Generation”• “Host and Target Testing Environment”• “Web-Based Project Monitoring”
Application Certification Plans
SCADE LifeCycle DO-178B and DO-178C Certification Plans provide a set of generic plans supporting the certification of applications developed with SCADE Suite® at Level A and B.
Certification Plans contain (non-exhaustive list):
• Software Development Plan
• Software Verification Plan
• Software Configuration Management Plan
• Software Quality Assurance Plan
• Software Development Standard
• Trace Data Generation Procedure
• SCADE Traceability Procedure
• Model Semantic Check Procedure
• Model Report Generation Procedure
• C Code Generation Procedure
• Compliance Matrix
For more information, see the SCADE LifeCycle DO-178B and DO-178C Certification Plans for SCADE Suite Applications Level A and B technical data sheets.
Requirements Management and Traceability
SCADE LifeCycle Requirements Management Gateway
Complete traceability solution1 for safety-critical design process with SCADE System®, SCADE Suite, and SCADE Display®:
• Capture of requirements and functional tests in a wide array of tools and formats:
• Microsoft® tools: Word, Excel®, Access®, Visio®
• Code files (C, C++, test log files)
• Technical Communication tools: Adobe® FrameMaker® and Acrobat® PDF
• Requirements Management tools: IBM® Rational® DOORS®, Rational RequisitePro®,
��
��������� ����������
��� � ��������������������� ����������������������� ���
������� ���������������������
��� ����� ��������� �!������� ���� �������������� ���
��������� �������� � ��������� ���
��
��� ����� ����������
��� � ��������������������� ����������������������� ���
�� ��������
�� �����"� �� ������ ���������� ���
��������������������
���������������
1. Powered by Reqtify® product, a registered trademark of Dassault Systèmes or its subsidiaries in the USA and/or other countries.
Downstream Information (N+1) = What is covering the selection in the central column
Current Selection (Level N) Central Column contains all documents
Upstream Information (N-1) = What is covered by selection in the central column
Technical Data Sheet
2 SCADE LifeCycle 6.4
Borland® CaliberRM®
• Modeling and Design tools: Atego Artisan Studio®, MathWorks® Simulink® and Stateflow®, National Instruments LabVIEW™
• Test tools: IBM® Rational® Test RealTime and National Instruments TestStand™
• Automatic consistency check of requirements• Interactive analysis of requirements coverage• Automatic and customizable report
generation of traceability matrices, coverage analysis, impact analysis
• Bi-directional navigation between requirements and tests
• Traceability between requirements and SCADE System, SCADE Suite, SCADE Display, SCADE UA Page Creator for ARINC 661, and SCADE Widget Creator for ARINC 661 designs
• Compliant with DO-178B, DO-178C, EN 50128, IEC 61508, ISO 26262, and IEC 60880 standards
Automatic Documentation Generation
SCADE LifeCycle Reporter
Automatic reporting solution for SCADE Suite, SCADE Display, SCADE System, and SCADE UA Page Creator for ARINC 661:
• Generation of reports in RTF or HTML formats• Customization of report content and display• Setting common documentation standards
• Qualified under DO-178C as a verification tool (Criteria 3 /TQL-5) for SCADE Suite and SCADE Display applications with certification data available from Esterel Technologies
• Integration with SCADE LifeCycle Requirements Management Gateway for reporting traceability information at model level
Host and Target Testing Environment
SCADE LifeCycle Qualified Test Environment
Test Automation Management tool for testing on host and target fully integrated with the SCADE Suite model-based development and verification environment:
• Textual test language with dedicated primitives (SSS subset)
• Support of CSV input formats• Automated regression testing• Test execution via script or user interface• Model coverage analysis via SCADE Suite MTC• Generation of test harness for LDRA TestBed®,
IBM® Rational® Test RealTime, or Vector Software VectorCAST™ test environments
• Management of tests• Production of conformity report• Compatibility with SCADE LifeCycle
Requirements Management Gateway• Qualified under DO-178C as a verification tool
(Criteria 3 / TQL-5) with certification data available from Esterel Technologies
For more information, see the SCADE LifeCycle Qualified Test Environment technical data sheet.
Contact Information
Submit questions to Technical Support [email protected]
Contact one of our Sales representatives [email protected]
Direct general questions about Esterel Technologies [email protected]
Discover the latest news on our products and technology athttp://www.esterel-technologies.com
Copyrights © 2013 Esterel Technologies. All rights reserved.SCADE®, SCADE System®, SCADE Suite®, SCADE Display®, and SCADE LifeCycle® are registered trademarks of Esterel Technologies. All other trademarks and tradenames contained herein are the property of their respective owners. Esterel Technologies releases this information with full intent to be 100% accurate however information contained herein is subject to change without notice and Esterel Technologies assumes no responsibility or liability as a result of any inaccuracies.Revision: SLC-TDS-6.4 - 21/01/13
Web-Based Project Monitoring
SCADE LifeCycle Dashboard
Collaborative solution1 for project monitoring of SCADE Suite model-based development and verification activities:
• Predefined default metrics and dashboards• Extraction of metrics from SCADE Suite models
• Consolidation of metrics data with other sources of monitoring data
• Generation of monitoring reports with graphics
• Customization of metrics and dashboards• Web-based collaborative access to project
dashboards from mobile devices or remote computers
SCADE LifeCycle Product Solutions
1. Powered by PRELYTIS LiveDashBoard.
SCADE LifeCycle Requirements Management Gateway:
• Standard connectors: Microsoft Access®, Excel®, Visio®, Word, IBM® Rational® RequisitePro® and DOORS®, Adobe Acrobat® and FrameMaker®, SCADE Display, SCADE Suite
• Additional connectors: Atego Artisan Studio®, IBM® Rational® Test RealTime, Borland® CaliberRM®, Simulink®, National Instruments LabVIEW™ and TestStand™
SCADE LifeCycle Generic Qualified Test Environment (QTE)
SCADE LifeCycle QTE for IBM RTRT
SCADE LifeCycle QTE for LDRA TestBed®
SCADE LifeCycle QTE for Vector Software VectorCAST
SCADE LifeCycle Reporter
SCADE LifeCycle Dashboard
SCADE LifeCycle DO-178B Certification Plans for SCADE Suite Applications Levels A and B
SCADE LifeCycle DO-178C Certification Plans for SCADE Suite Applications Levels A and B
