TECHNICAL AMENDMENT NO.: 01 - Bharat Petroleum...TECHNICAL AMENDMENT NO.: 01 DISCIPLINE:...

TECHNICAL AMENDMENT NO.: 01 DISCIPLINE: INSTRUMENTATION

Page 1 of 4

TECHNICAL AMENDMENT NO. : 01

TO

BIDDING DOCUMENT NO. : A918-160-16-50-EJ-T-0150

(ELECTRICAL & INSTRUMENTATION WORKS FOR GTU)

FOR

PROJECT: GTU, M/s BPCL, MUMBAI

A918-160-16-50-EJ-R-0150 (PART-B) 02.08.2018 ISSUED AS AMENDMENT IS DY KS

REFERENCE DOC. DATE REVISIONS BY CHECKED APPROVED


Page 2 of 4

SUBJECT : Technical Amendment-1 BIDDING DOCUMENT NO. : A918-160-16-50-EJ-T-0150 (ELECTRICAL & INSTRUMENTATION WORKS FOR GTU) The terms, conditions of Bidding Document stand modified to the extent indicated under column “MODIFICATIONS/ ADDITIONS/ DELETIONS”. All other terms & conditions etc. of bidding Document issued earlier shall remain unaltered.

Sl.

No. Section No./ Document No. Clause No./ Item No. Subject Modifications/Additions/Deletions

1. SOR no. A918-160-16-51-EJ-SOR-

0150-B Instrumentation works Sr. no. 9, 10, 11, 12 of

SOR Pressure Gauge

Installation Drawing No. HY-D-4-33700-39815 referred in the SOR clause is attached.

2. SOR no. A918-160-16-51-EJ-SOR-

0150-B Instrumentation works Sr. no. 29 of SOR

Differential Pressure gauge Installation

Drawing No. HY-D-4-33700-39815 referred in the SOR clause is attached.

3. SOR no. A918-160-16-51-EJ-SOR-

0150-B Instrumentation works Sr. no. 50, 51 of SOR

Pressure transmitter Installation


4. SOR no. A918-160-16-51-EJ-SOR-

0150-B Instrumentation works Sr. no. 60, 61 of SOR

Differential pressure transmitter Installation


5. SOR no. A918-160-16-51-EJ-SOR-


Flow transmitter Installation


6. SOR no. A918-160-16-51-EJ-SOR-


Pressure Gauge Installation

Refer sheet-4 of 26 of Dwg. no. 160-K-0001-970509-02-08 (MUG) attached.


Page 3 of 4

Sl.


7. SOR no. A918-160-16-51-EJ-SOR-




8. SOR no. A918-160-16-51-EJ-SOR-




9. SOR no. A918-160-16-51-EJ-SOR-




10. SOR no. A918-160-16-51-EJ-SOR-




11. SOR no. A918-160-16-51-EJ-SOR-


Differential Pressure Gauge Installation


12. SOR no. A918-160-16-51-EJ-SOR-




13. SOR no. A918-160-16-51-EJ-SOR-




14. SOR no. A918-160-16-51-EJ-SOR-




15. SOR no. A918-160-16-51-EJ-SOR-




16. SOR no. A918-160-16-51-EJ-SOR-





Page 4 of 4

Sl.


17. SOR no. A918-160-16-51-EJ-SOR-




18. SOR no. A918-160-16-51-EJ-SOR-




19. SOR no. A918-160-16-51-EJ-SOR-


Differential Pressure transmitter Installation


20. SOR no. A918-160-16-51-EJ-SOR-


Differential Pressure transmitter Installation


21. SOR no. A918-160-16-51-EJ-SOR-


Level transmitter Installation


22. SOR no. A918-160-16-51-EJ-SOR-


Level transmitter Installation


23. SOR no. A918-160-16-51-EJ-SOR-


Supply of Fiber optic Patch chords 5 m length

each with necessary connectors at both ends

Consider the unit of measurement in SOR as “NOS” instead of “M”

(SIGNATURE AND STAMP OF BIDDER)

1

HYDERABAD

COMMENT COMPLIANCE

Date

03/05/2018

Prepared

PUNNAM

Approved

ANJI

Ref doc: Comments Dt.: 05/04/2018

1) HY-DG-4-33700-39815-R00: Instrument Installation and hookup drawings

EIL COMMENT BHEL CLARIFICATION

The drawing is updated as per comments. Please accord approval for our records.

BHEL to follow approved Hookup of BPCL DHT Project (copy attached with this

document) and modify the hook up accordingly. Noted and incorporated.

HY-DG-4-33700-39815-Hookup 1 of 1

Rev. 0 1 2 3 4 NEA Document No.:

Date 12.03.2018 09.05.2018 27.06.2018

160-K-0001-970509-02-08 Created JW JW JW

Checked VF VF VF

Approved SKP SKP SKP

NNEEUUMMAANN && EESSSSEERR

GGRROOUUPP

Cover Sheet

Instrument Hook ups Customer : BPCL, MAHUL MUMBAI Consultant : Engineers India Limited. Customer Order No. : - Installation Site : Mahul Mumbai, India Service : H2 Make Up Compressor

Item : 160-K-0001 A/B Equipment Tag No. : As Shown on Document Supplier : Neuman & Esser NEA Order No. : 970509 Compressor type : 1 TEL 30 Quantity : 2

Material Requisition No. : A918-160-KA-MR-5010

Purchase Requisition No: A918-160-KA-PR-5010-07

Neuman & Esser

Instrument Hook Ups

Order no.: 970509

Project: GTU

Supplier: NEA INDIA

Compressor Type: 1 TEL 30

Customer: BPCL, MUMBAI Tag no.: 160-K-0001 A/B

Page : 1 of 26

Rev. 0 1 02 Drawing no.:

Date: 12.03.2018 09.05.2018 27.06.2018

Drawn: JVW JVW JVW

Checked: VVF VVF VVF

160-K-0001-970509-02-08

• Final BOM & Routine is as per Isometric drawing.

Instrument description:

Differential Pressure Transmitter

(Gauge Board Mounted)

Tag no: 160-GPDT-1230/1265

No. Qt

y. UNIT MATERIAL DESCRIPTION

14 2 Nos. Differential Pressure Transmitter with Integral 5 Valve Manifold - flanged x ½”NPTF SS316 with mounting bolts and PTFE O-ring.

1 4 Nos. Pipe 3/4".(MOC As Per PMS:- B5A)

2 4 Nos. Equal Tee ¾” X ½” (MOC As Per PMS:- B5A)


4 4 Nos. Pipe nipple PE X ½” NPT.(MOC As Per PMS:- B5A)

5 4 Nos. Vent Gate Valve, 1/2" SW.(MOC As Per PMS:- B5A)

6 4 Nos. Equal Tee, 1/2" SW, 6000#.(MOC As Per PMS:- B5A)

7 6 Nos. Elbow, 1/2" SW, 6000#.(MOC As Per PMS:- B5A)

8 30 Mtrs. Pipe 1/2" .(MOC As Per PMS:- B5A)

9 4 Nos. Pipe 1/2" (PE X TH) .(MOC As Per PMS:- B5A)

10,11,12,13 12 Nos. ½” Flange, Gasket, Studs & Nuts, Blind Flange.(MOC As Per PMS:- B5A)

15,16,17,18 4 Nos. ¾” Flange, Gasket, Studs & Nuts, Blind Flange.(MOC As Per PMS:- B5A)

Service: Gas (Process Gas)

Neuman & Esser

Instrument Hook Ups

Order no.: 970509

Project: GTU

Supplier: NEA INDIA



Page : 2 of 26


Date: 12.03.2018 09.05.2018 27.06.2018

Drawn: JVW JVW JVW


160-K-0001-970509-02-08



Differential Pressure Gauge (Gauge Board Mounted)

Tag no: 160-GPDG-1231/1266

No. Qty. UNIT MATERIAL DESCRIPTION

14 2 Nos. Differential Pressure Gauge flush mount with back entry, connection: NPT 1/2” (M)












19 2 Nos. 5 Valve manifold 1/2" NPTF x 1/2” NPTF, SS316 & 1/4" NPT vent hole with plug


Neuman & Esser

Instrument Hook Ups

Order no.: 970509

Project: GTU

Supplier: NEA INDIA



Page : 3 of 26


Date: 12.03.2018 09.05.2018 27.06.2018

Drawn: JVW JVW JVW


160-K-0001-970509-02-08


Instrument Description:

Pressure Transmitter

(Gauge Board Mounted) Tag no: 160-GPT-1233/1268, 160-GPT-1236/1271A, 160-

GPT-1236/1271B, 160-GPT-1236/1271C,160-GPT-1235/1270


14 10 Nos. Pressure Transmitter with Integral 2 Valve Manifold - flanged x 1/2” NPTF SS316 with mounting bolts and PTFE O-ring.













Neuman & Esser

Instrument Hook Ups

Order no.: 970509

Project: GTU

Supplier: NEA INDIA



Page : 4 of 26


Date: 12.03.2018 09.05.2018 27.06.2018

Drawn: JVW JVW JVW


160-K-0001-970509-02-08


Instrument Description:

Pressure Gauge

(Gauge Board Mounted) Tag no: 160-GPG-1232/1267, 160-GPG-1234/1269


14 4 Nos. Pressure Gauge with 2-Valve Manifold













Neuman & Esser

Instrument Hook Ups

Order no.: 970509

Project: GTU

Supplier: NEA INDIA



Page : 5 of 26


Date: 12.03.2018 09.05.2018 27.06.2018

Drawn: JVW JVW JVW


160-K-0001-970509-02-08


Level Transmitter (Local Mounted)

Tag no: 160-GLT-1230/(1236)

CRANKCASE /

CYLINDER

LUBRICATOR

TANK

INST.PIPING

1

23

4

5

6

7

5

9

8

No. Quantity UNIT MATERIAL DESCRIPTION

1 2 Nos. Level Transmitter 2 2 Nos. Integral 5 Valve Manifold flanged x ½”NPTF with mounting bolts and PTFE O-rings &

¼”NPT vent hole with plug 3 2 Nos. Tube Fitting 1/2" OD impulse line x ½ ”NPT (M) Connector, SS316 (Double

Compression type) 4 2 Nos. ½” NPTM male connector with bug screen 5 20 Mtrs. Tubing ½” OD x 0.065” thick ASTM A-269 TP316L stainless seamless tube 6 2 Nos. Ferrule Tee suitable for 1/2” OD tube Material:SS316 (Double Compression type) 7 2 Nos. Low point drains valve (Needle valve) 1/2” tube connection with 1/2" tube plug. 8 2 Nos. Union Tube fittings for 1/2” OD impulse line, Material: SS316,(compression type fitting) 9 2 Nos. Tube Fitting 1/2" OD impulse line x 1” NPT (M) Connector, SS316 (Double

Compression type)

Service: Liquid (Lube Oil)

Neuman & Esser

Instrument Hook Ups

Order no.: 970509

Project: GTU

Supplier: NEA INDIA



Page : 6 of 26


Date: 12.03.2018 09.05.2018 27.06.2018

Drawn: JVW JVW JVW


160-K-0001-970509-02-08


Pressure Gauge (Gauge Board Mounted)

Tag no: 160-PG-1238/(1273), 160-PG-1239/(1274), 160-PG-1257,160-PG-1258

PIPING INST.

1

34

9

6

2

5

7 8


1 6 Nos. Pressure Gauge flush mount with back entry, connection: NPT 1/2” (M) 2 6 Nos. Snubber 1/2" NPT(F) x 1/2” NPT (M) SS316 3 6 Nos. 2-valve Manifold 1/2"NPTF x 1/2" NPTF, SS316 & 1/4"NPT vent hole with plug 4 6 Nos. Tube Fitting 1/2” OD impulse line x ½” NPT (M) Connector, SS316

(Double Compression type) 5 60 Mtrs. Tubing 1/2" OD x 0.065” thick ASTM A-269 TP316L stainless seamless tube 6 6 Nos. Tube Fitting 3/4"NPTM x 1/2” OD male connector in SS316 (Double Compression type) 7 6 Nos. Ferrule Tee suitable for 1/2” OD tube Material:SS316 (Double Compression type) 8 6 Nos. Low point drains valve (Needle valve) 1/2” tube connection with 1/2" tube plug. 9 6 Nos. Union Tube fittings for 1/2” OD impulse line, Material: SS316,(compression type fitting)

Service: Liquid (Lube oil & Cooling Water)

Neuman & Esser

Instrument Hook Ups

Order no.: 970509

Project: GTU

Supplier: NEA INDIA



Page : 7 of 26


Date: 12.03.2018 09.05.2018 27.06.2018

Drawn: JVW JVW JVW


160-K-0001-970509-02-08



Tag no: 160-PG-1249/(1284),

5

PIP

ING

INS

T.

6

1

34

5 2


1 2 Nos. Pressure Gauge flush mount with back entry, connection: NPT 1/2” (M) 2 2 Nos. Union Tube fittings for 1/2” OD impulse line, Material: SS316,(compression type fitting) 3 2 Nos. Block & Bleed valve 1/2" NPTF x 1/2” NPTF, SS316 & 1/4"NPT vent hole with plug 4 2 Nos. Tube Fitting 1/2” OD impulse line x 1/2" NPT (M) Connector, SS316

(Double Compression type) 5 20 Mtrs. Tubing 1/2" OD x 0.065” thick ASTM A-269 TP316L stainless seamless tube 6 2 Nos. Tube Fitting 3/4"NPTM x 1/2” OD male connector in SS316 (Double Compression type)



Tag no: 160-PG-1260, 160-PG-1256(1291), 160-PG-1246/(1281)

Service: N2 Purge

Neuman & Esser

Instrument Hook Ups

Order no.: 970509

Project: GTU

Supplier: NEA INDIA



Page : 8 of 26


Date: 12.03.2018 09.05.2018 27.06.2018

Drawn: JVW JVW JVW


160-K-0001-970509-02-08

PIPING INST.

1

34

9

6

2

5

7 8


1 5 Nos Pressure Gauge flush mount with back entry, connection: NPT 1/2” (M) 2 5 Nos. Gauge Saver 1/2" NPT(F) x 1/2” NPT (M) SS316 3 5 Nos Block & Bleed valve 1/2" NPTF x 1/2” NPTF, SS316 & 1/4"NPT vent hole with plug 4 5 Nos Tube Fitting 1/2” OD impulse line x 1/2" NPT (M) Connector, SS316

(Double Compression type) 5 50 Mtrs. Tubing 1/2" OD x 0.065” thick ASTM A-269 TP316L stainless seamless tube 6 5 Nos Tube Fitting 3/4"NPTM x 1/2” OD male connector in SS316 (Double Compression type) 7 5 Nos Ferrule Tee suitable for 1/2” OD tube Material:SS316 (Double Compression type) 8 5 Nos Low point drains valve (Needle valve) 1/2” tube connection with 1/2" tube plug. 9 5 Nos Union Tube fittings for 1/2” OD impulse line, Material: SS316,(compression type fitting)

Service: Liquid (CW), purge & LO

B992

Stamp

Neuman & Esser

Instrument Hook Ups

Order no.: 970509

Project: GTU

Supplier: NEA INDIA



Page : 9 of 26


Date: 12.03.2018 09.05.2018 27.06.2018

Drawn: JVW JVW JVW


160-K-0001-970509-02-08


Pressure Transmitters (Gauge Board Mounted)

Tag no: 160-PT-1247/(1282A),160-PT-1247B/(1282B), 160-PT-1247C/(1282C),160-PT-1245/(1280)

4

PIPING INST.

51

2

3

4

8

6

7


1 8 Nos. Pressure Transmitter 2 8 Nos. Integral 2 Valve Manifold flanged x 1/2"NPTF SS316 with mounting bolts and PTFE O-

ring & 1/4"NPT vent hole with plug 3 8 Nos. Tube Fitting 1/2” OD impulse line x 1/2"NPT (M) Connector, SS316

(Double Compression type) 4 80 Mtrs. Tubing 1/2" OD x 0.065” thick ASTM A-269 TP316L stainless seamless tube 5 8 Nos. Tube Fitting 3/4”NPTM x 1/2” OD male connector in SS316 (Double Compression type) 6 8 Nos. Ferrule Tee suitable for 1/2” OD tube Material:SS316 (Double Compression type) 7 8 Nos. Low point drains valve (Needle valve) 1/2” tube connection with 1/2" tube plug. 8 8 Nos. Union Tube fittings for 1/2” OD impulse line, Material: SS316,(compression type fitting)

Service: Liquid (Lube oil)

Neuman & Esser

Instrument Hook Ups

Order no.: 970509

Project: GTU

Supplier: NEA INDIA



Page : 10 of 26


Date: 12.03.2018 09.05.2018 27.06.2018

Drawn: JVW JVW JVW


160-K-0001-970509-02-08


Differential Pressure Transmitter (Gauge Board Mounted)

Tag no: 18-PDT-1242/(1277), 18-PDT-1259

1

2 3

3

PIPINGINST.

PIPINGINST.

4

4

5

6

76

7

4

4

8

8

HP

LP

LP

HP


1 3 Nos. Differential Pressure Transmitter

2 3 Nos. Integral 5 Valve Manifold flanged x ½”NPTF with mounting bolts and PTFE O-rings & ¼”NPT vent hole with plug

3 6 Nos. Tube Fitting 1/2” OD impulse line x ½” NPT (M) Connector, SS316 (Double Compression type)

4 60 Mtrs. Tubing ½” OD x 0.065” thick ASTM A-269 TP316L stainless seamless tube

5 6 Nos. Tube Fitting ¾”NPTM x 1/2” OD male connector in SS316 (Double Compression type)

6 6 Nos. Ferrule Tee suitable for 1/2” OD tube Material:SS316 (Double Compression type)

7 6 Nos. Low point drains valve (Needle valve) 1/2” tube connection with 1/2" tube plug.

8 6 Nos. Union Tube fittings for 1/2” OD impulse line, Material: SS316,(compression type fitting)

Service: Liquid (Lube oil & CW)

Neuman & Esser

Instrument Hook Ups

Order no.: 970509

Project: GTU

Supplier: NEA INDIA



Page : 11 of 26


Date: 12.03.2018 09.05.2018 27.06.2018

Drawn: JVW JVW JVW


160-K-0001-970509-02-08


Level Transmitter (Local Mounted)

Tag no: 160-GLT-1235

COOLING

WATER TANK

160-T-0001

7 8

H P

2

4

3

1

6

5

4

3

10

L P

9


1

1 No Level Transmitter, 1/2” NPT (Female).

2 1 No. 5 valve manifold With plug , SS316 material, connections: 1/2” NPT (Female) X 1/2” NPT (Female)

3 2 Nos. Fitting 1/2” OD impulse line x 1/2” NPT (Male) Connector, Material: SS316, (Double Compression type)

4 10 Mtrs. Tubing 1/2” OD, Thickness: 0.065”, Material: SS316L. 5 1 No Low point drains valve (Needle valve) 1/2” tube connection with 1/2" tube plug. 6 1 No. Ferrule Tee suitable for 1/2” OD tube Material:SS316 (Double Compression type) 7 1 No. Isolation valve flange Connections: 2”CL300RF. 8 1 SET Bolts, Nuts & Gaskets (As per Mechanical Hardware List).MOC As per PMS A1A 9 1 No. 2” 300#RF Blind Flange with 1/2” NPT (F) tapping. MOC As per PMS A1A 10 1 No. Vent/mud protector 1/2” NPT (M).

Service: Liquid (Cooling Water)

Neuman & Esser

Instrument Hook Ups

Order no.: 970509

Project: GTU

Supplier: NEA INDIA



Page : 12 of 26


Date: 12.03.2018 09.05.2018 27.06.2018

Drawn: JVW JVW JVW


160-K-0001-970509-02-08


Pressure Transmitter (Gauge Board Mounted)

Tag no: 160-GPT-1262A, 160-GPT-1262B, 160-GPT-1262C,160-GPT-1261, 18-GPT-1263

4

PIPING INST.

51

2

3

4

8

6

7


1 5 Nos. Pressure Transmitter

2 5 Nos. Integral 2 Valve Manifold flanged x 1/2"NPTF SS316 with mounting bolts and PTFE O-ring & 1/4"NPT vent hole with plug

3 5 Nos. Tube Fitting 1/2" OD impulse line x 1/2"NPT (M) Connector, SS316 (Double Compression type)

4 50 Mtrs. Tubing 1/2" OD x 0.065” thick ASTM A-269 TP316L stainless seamless tube

5 5 Nos. Tube Fitting 3/4” NPTM x 1/2” OD male connector in SS316 (Double Compression type)

6 5 Nos. Ferrule Tee suitable for 1/2” OD tube Material:SS316 (Double Compression type)

7 5 Nos. Low point drains valve (Needle valve) 1/2” tube connection with 1/2" tube plug.


j

Service: Liquid (Cooling Water)

Neuman & Esser

Instrument Hook Ups

Order no.: 970509

Project: GTU

Supplier: NEA INDIA



Page : 13 of 26


Date: 12.03.2018 09.05.2018 27.06.2018

Drawn: JVW JVW JVW


160-K-0001-970509-02-08



Tag no: 160-GPDG-1242/(1277),18-GPDG-1259

PIPING INST.

PIPING INST.

5

5

6

2

3 3

3

1

4

4

3

5

5

5

5

9

7

8

9

7

8


1 3 Nos. Differential Pressure Gauge flush mount with back entry, connection: NPT 1/2” (M) 2 3 Nos. 5 Valve manifold 1/2" NPTF x 1/2" NPTF, SS316 & 1/4"NPT vent hole with plug 3 12 Nos. Tube Fitting 1/2” OD impulse line x 1/2” NPT (M) Connector, SS316

(Double Compression type) 4 6 Nos. Tube Fitting 1/2” OD impulse line x 1/2” NPT(F) connector in SS316

(Double Compression type) 5 60 Mtrs. Tubing 1/2" OD x 0.065” thick ASTM A-269 TP316L stainless seamless tube 6 6 Nos. Tube Fitting 3/4"NPTM x 1/2” OD male connector in SS316 (Double Compression type) 7 6 Nos. Ferrule Tee suitable for 1/2” OD tube Material:SS316 (Double Compression type) 8 6 Nos. Low point drains valve (Needle valve) 1/2” tube connection with 1/2" tube plug. 9 6 Nos. Union Tube fittings for 1/2” OD impulse line, Material: SS316,(compression type fitting)

Service: Liquid (Cooling Water) & Lube Oil

Neuman & Esser

Instrument Hook Ups

Order no.: 970509

Project: GTU

Supplier: NEA INDIA



Page : 14 of 26


Date: 12.03.2018 09.05.2018 27.06.2018

Drawn: JVW JVW JVW


160-K-0001-970509-02-08



Tag no: 160-GPDG-1248/(1283)

No. Quantity UNITS MATERIAL DESCRIPTION

1 2 Nos. Differential Pressure Gauge flush mount with back entry, connection: NPT 1/2” (M) 2 2 Nos. 5 Valve manifold 1/2" NPTF x 1/2” NPTF, SS316 & 1/4"NPT vent hole with plug 3 8 Nos. Tube Fitting 1/2" OD impulse x 1/2” NPT(M) connector in SS316

(Double Compression type) 4 4 Nos. Tube Fitting 1/2” OD impulse x 1/2” NPT(F) connector in SS316

(Double Compression type) 5 40 Mtrs. Tubing 1/2" OD x 0.065” thick ASTM A-269 TP316L stainless seamless tube 6 4 Nos. Tube Fitting 3/4"NPTM x 1/2” OD male connector in SS316

(Double Compression type) 7 4 Nos. Union Tube fittings for 1/2” OD impulse line, Material: SS316,(compression type

fitting)

Service: Gas (N2 Gas)

Neuman & Esser

Instrument Hook Ups

Order no.: 970509

Project: GTU

Supplier: NEA INDIA



Page : 15 of 26


Date: 12.03.2018 09.05.2018 27.06.2018

Drawn: JVW JVW JVW


160-K-0001-970509-02-08


Pressure Transmitter (Gauge Board Mounted)

Tag no: 160-GPT-1254/(1289), 160-GPT-1255/(1290)

1

2

4

5

3

PIPING

INST.

6

No. Quantity UNITS MATERIAL DESCRIPTION

1 4 Nos. Pressure Transmitter

2 4 Nos. Integral 2 Valve Manifold flanged x ½”NPTF SS316 with mounting bolts and PTFE O-ring & ¼”NPT vent hole with plug

3 4 Nos. Tube Fitting 1/2" OD impulse line x ½ ”NPT (M) Connector, SS316

4 40 Mtrs. Tubing ½” OD x 0.065” thick ASTM A-269 TP316L stainless seamless tube

5 4 Nos. Tube Fitting ¾”NPTM x 1/2” OD male connector in SS316


Service: Gas (N2 Gas)

Neuman & Esser

Instrument Hook Ups

Order no.: 970509

Project: GTU

Supplier: NEA INDIA



Page : 16 of 26


Date: 12.03.2018 09.05.2018 27.06.2018

Drawn: JVW JVW JVW


160-K-0001-970509-02-08


Level Gauge (Reflex Type) Tag no: 160-GLG-1234

Cooling Water Tank

PIPING INST

INST.

3

4

1

3

4

PIPING

2

2

No. Quantity

UNIT MATERIAL DESCRIPTION

1 1 No. Reflex type Level Gauge, 2” 300Cl RF in CS

2 2 Nos Gauge cock on level Gauge (Part of level gauge) Valve body SS and trim material SS 316.

3 2 Nos. 3/4” SW gate valve in. MOC as per A1A.

4 2 Nos. Plug 3/4” NPT.MOC as per A1A.

Service: Water (Cooling Water)

Neuman & Esser

Instrument Hook Ups

Order no.: 970509

Project: GTU

Supplier: NEA INDIA



Page : 17 of 26


Date: 12.03.2018 09.05.2018 27.06.2018

Drawn: JVW JVW JVW


160-K-0001-970509-02-08


Level Gauge (Reflex Type) Tag no: 160-GLG-1232/(1238)

PACKING

LEAKAGE LIQUID

COLLECTION POT

PIPING INST

INST.

3

4

1

3

4

PIPING

2

2

No. Quantity

UNIT MATERIAL DESCRIPTION

1 2 Nos. Reflex type Level Gauge, 3/4”CL 300 RF in CS

2 4 Nos. Gauge cock on level Gauge (Part of level gauge) Valve body SS and trim material SS 316.

3 4 Nos. 1/2” SW gate valve. MOC as per A1A


Service: Gas (N2 + Process Gas)

Neuman & Esser

Instrument Hook Ups

Order no.: 970509

Project: GTU

Supplier: NEA INDIA



Page : 18 of 26


Date: 12.03.2018 09.05.2018 27.06.2018

Drawn: JVW JVW JVW


160-K-0001-970509-02-08


Level Gauge (Reflex Type) Tag no: 160-GLG-1233/(1239)

DISTANCE PIECE

LEAKAGE LIQUID

COLLECTION POT

PIPING INST

INST.

3

4

1

3

4

PIPING

2

2


1 2 Nos. Reflex type Level Gauge, 3/4”CL 300 RF in CS

2 4 Nos. Gauge cock on level Gauge (Part of level gauge) Valve body SS and trim material SS 316.

3 4 Nos. 1/2” SW gate valve. MOC as per A1A


Service: Gas(N2)

Neuman & Esser

Instrument Hook Ups

Order no.: 970509

Project: GTU

Supplier: NEA INDIA



Page : 19 of 26


Date: 12.03.2018 09.05.2018 27.06.2018

Drawn: JVW JVW JVW


160-K-0001-970509-02-08


Temperature Element (Local Mounted)

Tag no: 160-GTE-1233/(1263), 160-GTE-1232A/(1262A), 160-GTE-1232B/(1262B),160-GTE-232C/(1262C),


1 8 Nos. Thermometer Connection -1/2” NPT (M), K-Type Thermocouple Duplex.

2 8 Nos. Extension :Nipple Union Nipple , SS 316, all Threads’ size: 1/2” NPT (M)

3 8 Nos. Thermowell, connections: 1/2” NPT (F) to instrument, Flange connections 2”CL300 RF to piping, Thermowell Material - SS 316.

Neuman & Esser

Instrument Hook Ups

Order no.: 970509

Project: GTU

Supplier: NEA INDIA



Page : 20 of 26


Date: 12.03.2018 09.05.2018 27.06.2018

Drawn: JVW JVW JVW


160-K-0001-970509-02-08


Temperature Element (Local Mounted)

Tag no: 160-GTE-1240/(1270),160-GTE-1231/(1261) 160-GTE-1239/(1269),160-GTE-1246


1 7 Nos. Thermometer Connection -1/2” NPT (M), K-Type Thermocouple Duplex.

2 7 Nos. Extension :Nipple Union Nipple , SS 316, all Threads’ size: 1/2” NPT (M)

3 7 Nos. Thermowell, connections: 1/2” NPT (F) to instrument, Flange connections 1-1/2” CL300 RF to piping, Thermowell Material - SS 316.

Neuman & Esser

Instrument Hook Ups

Order no.: 970509

Project: GTU

Supplier: NEA INDIA



Page : 21 of 26


Date: 12.03.2018 09.05.2018 27.06.2018

Drawn: JVW JVW JVW


160-K-0001-970509-02-08


Temperature Gauge (Gauge Board Mounted)

Tag no: 160-GTG-1241/(1271),160-GTG-1245, 160-GTG-1230/(1260),160-GTG-1234/(1264)


1 7 Nos. Gas Filled Temperature Gauge, connection: 1/2”NPT (male).

2 7 Nos. Gas Filled Capillary Armoured type for Temperature Gauge. Material: SS316, capillary length 10 Mtrs. For each Gauge.

3 7 Nos. Temperature Gauge Stem Connection Fitting-1/2” NPT(M) Compression type fitting Material:SS316

4 7 Nos. Thermowell- Instrument Connection 1/2"NPT (F), Process Connection- 1-1/2” CL300 RF Material: SS316.

Neuman & Esser

Instrument Hook Ups

Order no.: 970509

Project: GTU

Supplier: NEA INDIA



Page : 22 of 26


Date: 12.03.2018 09.05.2018 27.06.2018

Drawn: JVW JVW JVW


160-K-0001-970509-02-08



Tag no: 160-GTG-1249/(1273), 160-GTG-1250/(1274).

P

IPIN

G

INS

T

3

1

2PIP

E




3 4 Nos. Temperature Gauge Stem Connection Fitting-1/2” NPT(M) Compression type fitting Material:SS316

4 4 Nos. Thermowell- Instrument Connection 1/2"NPT (F), Process Connection- 1-1/2” CL300 RF Material: SS316.

Neuman & Esser

Instrument Hook Ups

Order no.: 970509

Project: GTU

Supplier: NEA INDIA



Page : 23 of 26


Date: 12.03.2018 09.05.2018 27.06.2018

Drawn: JVW JVW JVW


160-K-0001-970509-02-08



Tag no: 160-GTG-12335/1265

Cranckcase

3

1

2




3 2 Nos. Thermowell- Instrument Connection 1/2"NPT (F), Process Connection- 1” NPT. Material: SS316.

Neuman & Esser

Instrument Hook Ups

Order no.: 970509

Project: GTU

Supplier: NEA INDIA



Page : 24 of 26


Date: 12.03.2018 09.05.2018 27.06.2018

Drawn: JVW JVW JVW


160-K-0001-970509-02-08

Instrument description

Bimetallic Thermometer Local Mounted

Tag no: 601-GTG-1243, 601-GTG-1247, 601-GTG-1251(1275),601-GTG-1253, 601-GTG-1255

No. Quantity/ Machine

Description

1 6 Thermometer , connection: ½ " NPT (M),

2 6 Thermowell Connections ½ " NPT (F) to instrument, Flange connections:- 1½"- 300# RF

3 6 sets Bolts, Nuts, gasket (Included in Mechanical Hardware List). MOC as per A1A

Neuman & Esser

Instrument Hook Ups

Order no.: 970509

Project: GTU

Supplier: NEA INDIA



Page : 25 of 26


Date: 12.03.2018 09.05.2018 27.06.2018

Drawn: JVW JVW JVW


160-K-0001-970509-02-08



Tag no: 601-GTG-1236 (1266), 601-GTG-1237 (1267)

No. Quantity/ Machine

Description

1 4 Thermometer , connection: ½ " NPT (M),

2 4 Thermowell Connections ½ " NPT (F) to instrument, Flange connections:- 1½"- 300# RF

3 4 sets Bolts, Nuts, gasket (Included in Mechanical Hardware List). MOC as per SS304

Neuman & Esser

Instrument Hook Ups

Order no.: 970509

Project: GTU

Supplier: NEA INDIA



Page : 26 of 26


Date: 12.03.2018 09.05.2018 27.06.2018

Drawn: JVW JVW JVW


160-K-0001-970509-02-08



Tag no: 601-GTG-1242

PIPING INST

2

13

COOLING WATER TANK

No. Quantity Description 1 1 Thermometer , connection: ½ " NPT (M),

2 1 Thermowell Connections ½ " NPT (F) to instrument, Flange connections:- 2"- 300# RF

3 1 set Bolts, Nuts, gasket (Included in Mechanical Hardware List). MOC as per A1A

TECHNICAL AMENDMENT NO.: 01 - Bharat Petroleum...TECHNICAL AMENDMENT NO.: 01 DISCIPLINE:...

Documents

Transcript of TECHNICAL AMENDMENT NO.: 01 - Bharat Petroleum...TECHNICAL AMENDMENT NO.: 01 DISCIPLINE:...