TechData_duronexl
-
Upload
arif-kurniawan -
Category
Documents
-
view
219 -
download
0
Transcript of TechData_duronexl
-
8/7/2019 TechData_duronexl
1/2
DURONtm-E SYNtHEtIC 0W-40
HEAVY DUtY ENGINE OIL
Introduction
Petro-Canadas DURON-E Synthetic 0W-40 will
get your off-road and on-road fleet started
with excellent cold start-up performance to
prevent low cold start engine wear. Industries
such as Mining, Drilling, Forestry and Heavy
Construction are where you will find DURON-ESynthetic 0W-40 hard at work.
The design for the DURON-E Synthetic 0W-40
(DESYN04) is based on the same CJ-4 / SM
performance additive technology used for
DURON-E 15W-40 and is suitable for use in
2007 and pre-2007 engines.
DURON-E products are specially formulated
with unique high performance additive systems
in combination with Petro-Canada's patented
99.9% pure synthetic base oils. One of the
purest base oils in the world. DURON-E is
formulated to the highest 4-stroke diesel and
gasoline engine oil standards and is ideal for
use in extended oil drain interval service. The
keys to success in extending service intervals
are good operating practices and maintenance
programs. Contact your Petro-Canada technical
representative for additional information and
assistance.
Features and Benefits
Excellent low temperature properties
Enjoy faster cold-weather start-ups with
less engine stress Extend equipment life and reduce
operating costs
Retains new oil quality longer
Excellent soot dispersion capability
Provides very good top-up performance
Reduce fuel consumption
Reduce unnecessary idling time.
Shut down engines with confidence of
restart in extreme cold temperatures
Enjoy potential fuel economy benefits
that arise from lower viscous dragversus a 15W-40 engine oil
Applications
DURON-E Synthetic 0W-40 meets the physical
property requirements of SAE J300 for this
viscosity grade and is formulated using CJ-4
technology.
Gasoline Engines
DURON-E SYN 0W-40 is suitable for use in
most engines operating on gasoline or natural
gas fuel. This includes passenger car and lightduty truck applications where API SM or earlier
specification is required.
DURON-E Synthetic 0W-40 provides better lowtemperature flow at severe cold temperaturesthan its competitor. The higher the viscosity,the thicker the engine oil.
-
8/7/2019 TechData_duronexl
2/2
Lubricants Head Office
Petro-Canada2310 Lakeshore Road West
Mississauga, Ontario
Canada L5J 1K2
Canada - West . . . . . . . . . . . Phone 1-800-661-1199
- East (English) . . . . Phone 1-800-268-5850
(French). . . . . Phone 1-800-576-1686
Other Areas. . . . . . . . . . . . . . Phone (416) 730-2408
E-mail . . . . . . . . . . . . . . . . . . [email protected]
Internet. . . . . . . . . . . . . . . . . lubricants.petro-canada.ca
IM-8040E (07.10)TMTrademark of Petro-Canada
To obtain Material Safety Data Sheet (MSDS), contact
one of Petro-Canadas TechData Info Lines.
TechData Info Lines
Health and SafetyPetro-Canada Europe Lubricants
The Manor, Haseley Business Centre
Warwick, Warwickshire
CV35 7LS
United Kingdom
Phone . . . . . . . . . . . . . . . . . . +44 (0) 2476-247294
Fax . . . . . . . . . . . . . . . . . . . . +44 (0) 2476-247295
Petro-Canada America Lubricants
980 North Michigan Avenue
Suite 1400, #1431
Chicago, Illinois
USA 60611
Phone . . . . . . . . . . . . . . . . . . 1-888-284-4572
Fax . . . . . . . . . . . . . . . . . . . . (708) 246-8994
E-mail . . . . . . . . . . . . . . . . . . [email protected]
Petro-Canada Asia Holding Company Ltd
Jai Shi Lubricants Trading (Shanghai) Co. Ltd.
1908 World Trade Tower
500 Guangdong Road, Huangpu District
Shanghai, China 200001
Phone . . . . . . . . . . . . . . . . . . +86-21-6362-0066
Fax . . . . . . . . . . . . . . . . . . . . +86-21-6362-0536
Web . . . . . . . . . . . . . . . . . . . www.petrocanada.cn
Email Address . . . . . . . . . . . . [email protected]
If you would like to know more about Petro-Canadas
DURON-E heavy duty engine oils, or any other productin our complete line of quality lubricants, pleasecontact us at:
PROPERTY TEST DURON-E SYN 0W-40METHOD
Flash Point, C / F ASTM D92 221 / 430
Kinematic Viscosity cSt @ 40C / SUS @ 100F ASTM D445 88.7 / 450.14
Kinematic Viscosity cSt @ 100C / SUS @ 210F ASTM D445 15.0 / 79.59Viscosity Index ASTM D2270 179
High Temp/High Shear Viscosity, cP @ 150C ASTM D4683 4.04
Cold Cranking Viscosity cP @ -35C / -31F ASTM D5293 5548
Pour Point C / F ASTM D5950 < -66 / < -87
Pumping Viscosity cP @ -40C / -40F ASTM D4684 26,940
Sulphated Ash, % wt ASTM D874 1.0
Sulphur, % ASTM D4294 0.369
Phosphorus, % ASTM D4951 0.109
Total Base Number (TBN), mg KOH /g ASTM D2896 8.11
Typical Performance Data