Tech Sheet: McDonnell Douglas F-15 Eagle Sheet: McDonnell Douglas F-15 Eagle...
7
BRUCE'S CUSTOM COVERS 18850 Adams Ct Morgan Hill, CA 95037 www.aircraftcovers.com Phone: 408/738-3959 Toll Free (U.S.): 800/777-6405 Fax: 408/738-2729 Email: [email protected] a div. of Aircraft Covers Inc. manufacturer of the finest custom-made aircraft covers Tech Sheet: McDonnell Douglas F-15 Eagle (mcdonnell-douglas-F15.pdf) F15 Canopy Cover Canopy Covers help reduce damage to your airplane's upholstery and avionics caused by excessive heat, and they can eliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean and help prevent vandalism and theft. The McDonnell Douglas F-15 Eagle Canopy Cover is custom designed for each model, as well as your aircraft's specific antenna and temperature probe placements, if applicable. The Canopy Cover is designed to enclose the windshield, side windows and canopy roof. The Canopy Cover attaches using adjustable "belly straps", which run under the belly and connect to the other side of the cover with a quick-release plastic buckle. When requested, it is also sometimes possible to design Canopy covers that can attach to the aircraft fuselage using pop-riveted snap-heads at the rear and snap-head screws on the engine cowl. The Canopy Cover is custom sewn and the corners are trimmed to match the colors of the airplane. The airplane's registration number can be imprinted onto both sides of the cover for an additional charge. A duffle bag is included with all Canopy Covers. Each Canopy Cover is normally made from Silver Acrylic Sunbrella or Silver Solution-Dyed Polyester and is lined 100% with a soft and smooth microfiber. Bruce's Custom Covers developed these materials especially for aircraft protection. The outer material is medium weight and treated for water resistance, UV resistance and anti-static buildup. The inner lining is a very soft and smooth microfiber to prevent scratching. The materials are extremely reflective, and tests show that the cabin interior temperature can be reduced to near-ambient temperature on even the hottest of days. It is water, ice and snow repellent, yet breathable enough to allow moisture to escape from between the cover and the aircraft surface. Our materials do not contain hydrocarbon compounds that can harm Plexiglas windshields and acrylic finishes. Other colors are available. Please [contact us](/contact) for availability and price. We also have an ultra lightweight material available for fitted Technical Sheet: McDonnell Douglas F-15 Eagle Page 1
Transcript of Tech Sheet: McDonnell Douglas F-15 Eagle Sheet: McDonnell Douglas F-15 Eagle...
BRUCE'S CUSTOM COVERS18850 Adams CtMorgan Hill, CA 95037www.aircraftcovers.com
Phone: 408/738-3959Toll Free (U.S.): 800/777-6405
Fax: 408/738-2729Email: [email protected]
a div. of Aircraft Covers Inc. manufacturer of the finest custom-made aircraft covers
Tech Sheet: McDonnell Douglas F-15 Eagle(mcdonnell-douglas-F15.pdf)
F15 Canopy Cover
Canopy Covers help reduce damage to your airplane's upholstery and avionics caused by excessive heat, and they caneliminate problems caused by leaking door and window seals. They keep the windshield and window surfaces clean andhelp prevent vandalism and theft.
The McDonnell Douglas F-15 Eagle Canopy Cover is custom designed for each model, as well as your aircraft's specificantenna and temperature probe placements, if applicable. The Canopy Cover is designed to enclose the windshield, sidewindows and canopy roof. The Canopy Cover attaches using adjustable "belly straps", which run under the belly andconnect to the other side of the cover with a quick-release plastic buckle.
When requested, it is also sometimes possible to design Canopy covers that can attach to the aircraft fuselage usingpop-riveted snap-heads at the rear and snap-head screws on the engine cowl.
The Canopy Cover is custom sewn and the corners are trimmed to match the colors of the airplane. The airplane'sregistration number can be imprinted onto both sides of the cover for an additional charge. A duffle bag is included with allCanopy Covers. Each Canopy Cover is normally made from Silver Acrylic Sunbrella or Silver Solution-Dyed Polyester and islined 100% with a soft and smooth microfiber. Bruce's Custom Covers developed these materials especially for aircraftprotection. The outer material is medium weight and treated for water resistance, UV resistance and anti-static buildup. Theinner lining is a very soft and smooth microfiber to prevent scratching. The materials are extremely reflective, and tests showthat the cabin interior temperature can be reduced to near-ambient temperature on even the hottest of days. It is water, iceand snow repellent, yet breathable enough to allow moisture to escape from between the cover and the aircraft surface. Ourmaterials do not contain hydrocarbon compounds that can harm Plexiglas windshields and acrylic finishes. Other colors areavailable. Please [contact us](/contact) for availability and price. We also have an ultra lightweight material available for fitted
Technical Sheet: McDonnell Douglas F-15 Eagle Page 1
hangar dust covers.
Canopy Covers are commonly referred to as Cabin Covers, Fuselage Covers, Canvas Covers, Canopy Caps, etc.
The McDonnell Douglas F-15 Eagle Pitot Tube Covers, made of Naughahyde vinyl, are designed to cover the entire pitotassembly. Slipping on over the tube, the cover tightens around the base with a special Velcro strap detail. A "remove beforeflight" streamer is attached to the cover. Non-burning Pitot Covers are designed to withstand more than 500 °Fahrenheit, and will prevent the pitot cover from melting onto the tube if the pitot heat is accidentally turned on with the pitotcover attached.
The Engine Inlet Plugs are custom fit for your McDonnell Douglas F-15 Eagle intakes, made with heavy-duty vinyl material,and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to be removed anddried if necessary. Engine plugs have 'remove before flight' streamers sewn onto the face of the plugs. Most plugs areembroidered with the aircraft registration number in black. Engine plugs may be inserted after flight when the engine is stillwarm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, Engine Blocks, and EngineBungs.
The Engine Exhaust Plugs are custom fit for your McDonnell Douglas F-15 Eagle exhaust openings, made with heavy-dutyvinyl material, and stuffed with a single block of sculpted urethane foam. Each plug has a zipper that allows the foam to beremoved and dried if necessary. Exhaust plugs have 'remove before flight' streamers sewn onto the face of the plugs. Mostplugs are embroidered with the aircraft registration number in black. Exhaust plugs may be inserted soon after flight whenthe engine is still warm. Engine Inlet Plugs are commonly referred to as Cowl Plugs, Intake Plugs, Cowl Blocks, EngineBlocks, and Engine Bungs.
The McDonnell Douglas F-15 Eagle Wing Covers are a perfect solution to protect your paint from sun damage andprevent winter frost, snow, ice buildup, and corrosion. They are made from Solution-Dyed Polyester or Acrylic Sunbrella andform-fit to slip around each wing tip, cover the entire upper surface of the wing and wrap around the leading and trailingedges. The covers secure under the wing with adjustable straps from the trailing edge to the leading edge. The wing coverscan also attach to each other with adjustable straps at the leading and trailing edges of the wing under the belly of the plane.In some instances, cut-outs are made in the trailing edge of the wing covers to accommodate static wicks. We have theability to also accommodate wing tip modifications, such as STOL kits, droop tips, and vortex generators. Wing covers arelabeled LEFT and RIGHT for your convenience. Wing Covers are available for winter use or long-term, all-year use. A HailProtection version can be made which incorporates very dense closed cell foam into the entire upper surface of the wingcovers to help prevent hail damage. Although these covers are bulky, they do help protect your wing and control surfacesagainst small to medium-size hail.
Horizontal Stabilizer Covers are a perfect solution to protect your paint from sun damage and prevent frost, snow, icebuildup, and corrosion. They are made from Solution-Dyed Polyester or Acrylic Sunbrella. They cover the entire uppersurface of the stabilizers and overlap around the leading and trailing edges as well as the wing tip. The covers secure undereach stabilizer with adjustable straps. In some instances, cut-outs are made in the trailing edge of the wing covers toaccommodate static wicks. Horizontal Stabilizer Covers are available for winter use or long-term all year use, and arenormally made from Solution-Dyed Polyester or Acrylic Sunbrella. A Hail Protection version can be made which incorporatesdense closed cell foam into the entire upper surface of the wing covers to help prevent hail damage. Although these coversare bulky, they do help protect your wing and control surfaces against small to medium-size hail.
Heatshield Interior Reflectors are made of a special laminate of metallized polyester film and closed cell foam. Less than1/8" thick, the Reflector can roll up and store in a sleeve, yet is stiff enough when flat to stand up against the windshieldusing the sun visors and window framing only. On some designs no Velcro or suction cups are necessary. Heatshields arean excellent short-term remedy for cockpit overheating, but use the Cockpit Cover for more effective and practical longterm protection. Heatshields should not be used on polarized windows.
The McDonnell Douglas F-15 Eagle Lightweight Travel Canopy Cover will cover the same area as our standard CanopyCover, but the material used is very lightwieight and will fold up and store in a much smaller space. This cover is ideal forthe airplane that is hangered full time and only needs a cover on rare occasions.
Intake Cover, Attachment Detail (inset) F15 Intake Cover
Intake Cover, F15-K McDonnell-Douglas F-15 Intake Covers
F15 Cockpit HeatShields & Inlet CoverF15 Intake Plugs
F15 Cockpit HeatShields & Intake Plugs McDonnell Douglas F-15 Exhaust Covers, 3D model
McDonnell Douglas F-15 Exhaust Covers, 3D modelCockpit HeatShield, Interior View (inset)
Technical Sheet: McDonnell Douglas F-15 Eagle Page 4
Current Products List (as of 6/27/18) Description Part No. Price
CANOPY COVER (single seat A models) F15-000 $785.00
CANOPY COVER (dual seat models) F15-001 $785.00
EXHAUST COVERS (set of 2) F15-205 $575.00
ENGINE INLET COVERS (set of 2) F15-100 $575.00
ENGINE INLET PLUGS, NSN: 1730-01-573-3631 SHIELD, AIRCRAFT
GROUND SERVICING (set of 2) F15-110 $650.00
EXHAUST PLUGS (set of 2) F15-210 $650.00
PITOT COVERS (set of 2) F15-211 $170.00
PITOT COVERS, heat resistant type (set of 2) F15-212 $270.00
ACES II SEAT PITOT COVER, each F15-505 $95.00
NOSE WHEEL COVER F15-550 $275.00
WING COVERS (padded for hail protection) (set of 2) F15-310 $1,355.00
HORIZONTAL STAB. COVERS (set of 2) F15-405 $510.00
HORIZONTAL STAB. COVERS (padded for hail protection) (set of 2) F15-410 $735.00
HORIZONTAL STAB. COVERS, hvy duty, padded for maintenance protection
(set of 2) F15-420 $1,055.00
CENTER SECTION UPPER ENGINE COVERS, hvy duty, padded for
maintenance protection F15-425 $1,050.00
HEATSHIELD SET (single seat models) (set of 2) F15-900 $285.00
HEATSHIELD SET (dual seat models) (set of 2) F15-910 $285.00
ACES II MAINTENANCE SEAT COVER F15-500 $255.00
MAIN WHEEL COVERS (set of 2) F15-555 $525.00
HUD ASSY COVER F15-600 $80.00
DASH 21 BAG F15-605 $360.00
FORWARD DISPLAY COVER F15-610 $150.00
REAR DISPLAY COVER F15-615 $150.00
SNIPER POD ATP-SE COVER, with foam/microfiber on window F15-620 $395.00
RADOME COVER F15-700 $450.00
RADOME COVER, padded for maintenance protection F15-702 $675.00
PARTIAL BLACKOUT WINDSHIELD SECTION COVER, chain weighted,
DRS p/n 8-26511-1 F15-800 $455.00
Technical Sheet: McDonnell Douglas F-15 Eagle Page 5
TRAVEL COVER, Light Weight Travel Canopy Cover (single seat A models) F15-805 $630.00
TRAVEL COVER, Light Weight Travel Canopy Cover (dual seat models) F15-810 $630.00
Prices subject to change. Other Covers and Design Alterations: Prices on request.
Prices are FOB Morgan Hill, CA. Sales tax on orders shipped to California addresses. Orders take approximately 3
weeks to complete. For domestic orders we normally ship by UPS ground service. Next day shipping and air parcel
post is available on request. We can take payment by Visa, Mastercard, American Express, or Discover.
Bruce's Custom Covers offers protective covers and plugs for virtually every type of airplane, jet and helicopter. If
you have questions about our products please call any time TOLL FREE: 800/777-6405, or FAX: 408/738-2729.
Technical Sheet: McDonnell Douglas F-15 Eagle Page 6
Technical Sheet: McDonnell Douglas F-15 Eagle Page 7
