Tech Briefs: NEW TESK Hinged switch · ST1 M12, 8 pin connector, ... Robot cells Folding or brake...
2
Contact Tech Briefs: Ordering Details TESK----- Hinge length S Standard version L Long hinge half Switching Angle A for surface mounting (180) I for inside mounting (0) U Adjustable Contact configuration 02 2 NC 11 1 NO / 1 NC 12 1 NO / 2 NC 13 1 NO / 3 NC 22 2 NO / 2 NC Wiring L1 pre-wired cable, bottom L2 pre-wired cable, top ST1 M12, 8 pin connector, bottom ST2 M12, 8 pin connector, top Cable Length (L1/L2 only) 1M 1 meter 3M 3 meters 5M 5 meters 10M 10 meters Accessories Additional hinge (no switch) TESK-ZS Standard version TESK-ZL With extended hinge half Connector cables A-K8P-M12-S-G-2.5M-BK-1-X-A-2 IP67 cable, 2.5 meter length A-K8P-M12-S-G-5M-BK-1-X-A-2 IP67 cable, 5 meter length A-K8P-M12-S-G-10M-BK-1-X-A-2 IP67 cable, 10 meter length Compatible Safety Controllers SRB-E-201LC SRB-301MC SRB-E-201ST SRB-301ST-24 SRB-E-204ST SRB-504ST SRB-211ST SRB-324ST Bold part numbers are regularly stocked Features NEW TESK Hinged switch 270 rotation of switch halves Applications ■ Material handling systems ■ Packaging machinery ■ Chemical processing equipment ■ Robot cells ■ Folding or brake presses ■ Filter presses ■ Punching machines ■ Printing machines ■ Injection molding ■ Palletizers ■ Packaging equipment To set the switching angle in adjustable models (U), use the included adjustment tool. After the switching angle has been set and checked, the blanking plug for the adjust- ment opening must be put in place to prevent tampering. Insert the blanking plug end of the adjustment tool in the adjustment opening and detach by making lateral movements with the tool. Glue into place, file smooth. Adjustable switching angle Overview The TESK Series is the latest addition to our safety hinge switch product family. The TESK hinge switch is designed to replace conventional hinges to provide monitoring of the position of machine guards which must be closed for operator safety. It provides guard door position monitoring without a unit mounted at the opening side or the need for readjustments because of misalignments of the guard door and frame. These switches are available with a factory preset switching angle for inside mounting or surface mounting, or with an adjustable switching angle to allow the installer to set their own specific angle. The adjustable model comes with a special tool that adjusts the switching angle and provides the cap for the adjustment port to prevent operators from readjusting the switching point. The TESK offers a greater rotation angle than ever before: Hinges are free to swing open through 270°. It is easy to install on a wide range of standard aluminum extruded profile frame sizes and other guard styles. It is even available with an extended hinge half with an extra set of mounting holes suitable to secure the hinge to Plexiglas or plastic doors. Models are provided with either a quick con- nector or prewired cable (1, 3, 5 or 10 meters), available from the top or bottom of the hinge. It is available with 2, 3 or 4 contacts, in a variety of configurations. Constructed from die cast zinc and with an IP65 rating to resist dust and water, these hinge switches are ideal for interlocking hinged safety guards in industrial environments. We also offer additional matching hinges (without switch) for both the standard and extended hinge types. Suitable for inside or surface mounting on standard aluminum profiles 40 mm 60 mm Guard door mounting hinge half available in two sizes Switches Unlimited [email protected] Phone: 800-221-0487 Fax: 718-672-6370 www.switchesunlimited.com
Transcript of Tech Briefs: NEW TESK Hinged switch · ST1 M12, 8 pin connector, ... Robot cells Folding or brake...
Contact
Schmersal USA 15 Skyline Drive Hawthorne, NY 10532 Tel: 914-347-4775 Fax: 914-347-1567 E-mail: [email protected] Schmersal Canada 15 Regan Road, Unit # 3 Brampton, ON L7A 1E3 Tel: 905-495-7540 Fax: 905-495-7543 E-Mail: [email protected]
Tech Briefs:
Available Literature
TESK Brochure 4 pages
Ordering Details
TESK-----
Hinge length
S Standard version L Long hinge half
Switching Angle
A for surface mounting (180)
I for inside mounting (0) U Adjustable
Contact configuration
02 2 NC 11 1 NO / 1 NC 12 1 NO / 2 NC 13 1 NO / 3 NC 22 2 NO / 2 NC
Wiring
L1 pre-wired cable, bottom L2 pre-wired cable, top ST1 M12, 8 pin connector, bottom ST2 M12, 8 pin connector, top
Cable Length (L1/L2 only)
1M 1 meter 3M 3 meters 5M 5 meters 10M 10 meters
Accessories
Additional hinge (no switch) TESK-ZS Standard version TESK-ZL With extended hinge half
Connector cables A-K8P-M12-S-G-2.5M-BK-1-X-A-2 IP67 cable, 2.5 meter length A-K8P-M12-S-G-5M-BK-1-X-A-2 IP67 cable, 5 meter length A-K8P-M12-S-G-10M-BK-1-X-A-2 IP67 cable, 10 meter length
Compatible Safety Controllers SRB-E-201LC SRB-301MC SRB-E-201ST SRB-301ST-24 SRB-E-204ST SRB-504ST SRB-211ST SRB-324ST Bold part numbers are regularly stocked
Features
NEW TESK Hinged switch
270 rotation of switch halves
Applications
■ Material handling systems ■ Packaging machinery ■ Chemical processing equipment ■ Robot cells ■ Folding or brake presses ■ Filter presses ■ Punching machines ■ Printing machines ■ Injection molding ■ Palletizers ■ Packaging equipment
To set the switching angle in adjustable models (U), use the included adjustment tool. After the switching angle has been set and checked, the blanking plug for the adjust-ment opening must be put in place to prevent tampering. Insert the blanking plug end of the adjustment tool in the adjustment opening and detach by making lateral movements with the tool. Glue into place, file smooth.
Adjustable switching angle
Overview The TESK Series is the latest addition to our safety hinge switch product family. The TESK hinge switch is designed to replace conventional hinges to provide monitoring of the position of machine guards which must be closed for operator safety. It provides guard door position monitoring without a unit mounted at the opening side or the need for readjustments because of misalignments of the guard door and frame. These switches are available with a factory preset switching angle for inside mounting or surface mounting, or with an adjustable switching angle to allow the installer to set their own specific angle. The adjustable model comes with a special tool that adjusts the switching angle and provides the cap for the adjustment port to prevent operators from readjusting the switching point. The TESK offers a greater rotation angle than ever before: Hinges are free to swing open through 270°. It is easy to install on a wide range of standard aluminum extruded profile frame sizes and other guard styles. It is even available with an extended hinge half with an extra set of mounting holes suitable to secure the hinge to Plexiglas or plastic doors. Models are provided with either a quick con-nector or prewired cable (1, 3, 5 or 10 meters), available from the top or bottom of the hinge. It is available with 2, 3 or 4 contacts, in a variety of configurations. Constructed from die cast zinc and with an IP65 rating to resist dust and water, these hinge switches are ideal for interlocking hinged safety guards in industrial environments. We also offer additional matching hinges (without switch) for both the standard and extended hinge types.
Suitable for inside or surface mounting on standard aluminum profiles
40 mm 60 mm
Guard door mounting hinge half available in two sizes
Switches [email protected]: 800-221-0487Fax: 718-672-6370www.switchesunlimited.com
3
Mounting possibilities
Mounting:Standard hinge outdoor mounting
Mounting:Standard hinge indoor mounting
Mounting:Long hinge half for plas-tic and metal doors as well as flaps for outdoor assembly
Technical dataStandards: IEC 60947-5-1; EN ISO 13849-1; EN 1088; BG-GS-ET-15Enclosure: Zinc diecast, enclosure cover self-extinguishing thermoplasticHinge bolt: Galvanised steel / zinc die-cast C45Contact type: Change-over contact with double break ZbSwitching system: A IEC 60947-5-1; slow action, positive break NC contactConnection: Connector plug M12 or cableConnector plug: M12, 5 or 8 pin, A - coded Switching angle: 3° from the set zero pointPositive break angle: 10° from the set zero pointMax. swivel angle: 270°Actuating speed: max. 180° / 0.3 sMechanical life: > 1 million operationsAmbient temperature: −25 °C … +65 °CProtection class: IP 65 to IEC/EN 60529Utilisation category: AC-15, DC-13Ie/Ue: 2 A / 230 VAC cable versions
1 A / 24 VDC cable and built-in connector versions Ui: 300 V cable versions
30 V M12 - plug 8 - pin (PELV corresponds to DIN EN 60204-1) 60 V M12 - plug 5 - pin
Uimp: 2.5 kV cable versions 0.8 kV plug 5-pin
Ithe: 2.5 AUe max: 230 V cable versions
30 V plug 8-pin 60 V plug 5-pin
Switching of low voltages: 1 mA / 3VDCDimensions H x W x D: TESK-S... 20 x 78 x 116 mm ; TESK-L... 20 x 98 x 116 mm
Ordering code
Hinged safety switches
TESK-➀➁-➂➃➄No. Option Description
➀ S Standard hingeL Long hinge half
➁ A preset for outside assemblyI preset for inside assemblyU freely adjustable switching angle
➂ 02 2 NC contacts11 1 NO contact / 1 NC contact12 1 NO contact / 2 NC contacts13 1 NO contact / 3 NC contacts22 2 NC contacts / 2 NO contacts
➃ L1 Cable downwardsL2 Cable upwardsST1 Connector plug bottomST2 Connector plug top
➄ 3M Cable length 3 meters (only L1 / L2) other cable lengths upon request
Additional hinge
TESK-➀No. Option Description
➀ ZS Standard additional hingeZL Additional hinge long hinge half
Dimensional drawings116101
6.1
66.882
20
78
15 15.5 15
40
17.5
60
15 15.5 37.5 15
20
6.1
116
66.882
20
98
101
The additional hinges have the same appearance and the same dimensions
Switches [email protected]: 800-221-0487Fax: 718-672-6370www.switchesunlimited.com
