Te824 v2 seminar
-
Upload
omona-tonny -
Category
Technology
-
view
537 -
download
0
Transcript of Te824 v2 seminar
KX-TES824 Ver-2
Panasonic Communications CO., (UK) LTD.
“
Ver. 2 Additional Features� Call Charge Calculation Feature� CO Busy out Feature� SMDR 64 ⇒10,000 with KX-TE82491 (MSG Card)� Call Log print out 500 ⇒10,000 with KX-TE82491
“
500500Extension Call Log Print Out W/O KX-TE82491
6464SMDR W/O KX-TE82491 (MSG Card)
YesNoCall Charge Calculation Feature
Feature Comparison Ver. 1 and Ver.2““
Ver.2Ver.1
10,00064SMDR W/ KX-TE82491 (MSG Card)
10,000500Extension Call Log Print Out W/ KX-TE82491
YesNoCO Busy out Feature
Features
Call Charge Calculation Feature -1
The PBX calculate call charges of outside (CO) line calls.
Note: This feature is a simple estimation of call charges.
PSTN
Calculate call charges
Display on A-PT and SMDR
Make external calls
“
Call Charge Calculation Feature -2
CO-1
CO-2
CO-3
1CO-1
Time Table No.CO Line
2CO-2
PSTN
3CO-x4CO-8
AMSunday
Week
PMAM
MondayPM
Time Table No-1
O
12
EOP
O
1
EOP
O
2
EOP
O
3
EOP
O
4
OOP
O
5
OOP
O
6
OEE
O
7
OEE
O
8
OEE
O
9
OEE
O
10
OEE
O
11
OPE
Max.4 Tables
AMxxx
PMOP
OP
OP
OP
OP
OP
EE
EE
EE
EE
EE
PE
AMSaturday
PMOP
OP
OP
OP
OP
OP
EE
EE
EE
EE
EE
PE
P=Peak O=Off Peak E=Economy
“
Call Charge Calculation Feature -3 ““
00
Location
No.
Call Charge Table for Time Table No-1
0123
Leading
No.
PeakFlat Charge
/DurationUnit Charge
/Duration
Off-PeakFlat Charge
/DurationUnit Charge
/Duration
EconomyFlat Charge
/DurationUnit Charge
/Duration
70/60s 40/30s 40/60s 35/30s 30/60s 30/30sxx xxxx 70/60s 40/30s 40/60s 35/30s 30/60s 30/30s99 xxxx 70/60s 40/30s 40/60s 35/30s 30/60s 30/30s
Max.100 Max.10 Digits If the dialed number is not match any leading number, the call charge for location number “99” is applied.
Duration
Charge
Flat Duration
Unit Duration
Flat Charge
Unit Charge
Waiting Time [xxx]
Call Duration
The call charge increases
““Call Charge Calculation Feature -4
441
921
190
442
922
923
924
Basic Programming:
““Call Charge Calculation Feature -5 Time Table Programming (Time Table select):
132
Select Time Table NumberClick
““Call Charge Calculation Feature -6 Time Table Programming (Schedule programming):
““Call Charge Calculation Feature -7 Charge setting (Leading Number and Time Table-1) :
100 Entry
10 Digits
161
P: 163O: 165E: 167
P: 164O: 166E: 168
““Call Charge Calculation Feature -8 Charge setting (Time Table-2) :
P: 170O: 172E: 174
P: 171O: 173E: 175
““Call Charge Calculation Feature -9 Charge setting (Time Table-3) :
P: 177O: 179E: 181
P: 178O: 180E: 182
““Call Charge Calculation Feature -10 Charge setting (Time Table-4):
P: 184O: 186E: 188
P: 185O: 187E: 168
CO Busy Out Feature -1““
The PBX monitor the loop current. (Selecting “Enable” in CO Busy out [154] )
When the line is seized and/or at a preprogrammed time every day.
If the current is not detected,
The PBX set the CO line to “Busy out” status. (No SMDR information)
The CO line cannot be used to make calls.
How to recover
- Pressing the corresponding single CO button on a PT, if the loop current is detected.
- When an incoming call arrives through “Busy out” status CO.
- The preprogrammed time every day, if the loop current is detected.
- Selecting “Disable” in CO Busy out [154].
CO Busy Out Feature -2““
Pre-programmed Timer
154 155
““SMDRWith KX-TE82491 (MSG Card) : Out put buffer 64 calls ⇒ 10,000 calls
Extension Call Log Print OutWith KX-TE82491 (MSG Card) : Out put buffer 500 calls ⇒ 10,000 calls
Thank you very much !
““