tdw 936
2
Description Features Toll Free 1-888-TDWmSon (839-6766) Patented in the United States and in foreign countries. ISO 9001 Certified Tapping machines are used for making connections to pipelines, tanks, and plant piping without shutdown and are used to make hot taps in preparation for plugging machine applications. The 936 Tapping Machine is hydraulically operated and is used for making pipe and tank taps from 12" to 36". Its operating te mperature is 0°F (-18°C) to 180°F (82°C) at 2,220 psi (153 bar). For temperatures above 180°F (82°C), consult the factory. The 936 Tapping Machine’s unique pressure balanced system eliminates the effects of pipeline pressure, reducing operating loads on the feedscrew. The 936 Tapping Machine meets NACE standard MR0175-93 (sulfide stress cracking resistant metallic material for oilfield equipment). Typical Tapping Setup Valve Adapter STOPPLE ® Fitting or Tapping Fitting SANDWICH ® Valve Pilot Drill Cutter Cutter Holder Pipeline 936 Tapping Machine Bulletin No: 1000.009.02 Date: April 2009 Cross Indexing No: n/a Supersedes: 1000.009.01 (2/00) The basic machine includes: Tapping machine Ladder and platform Hydraulic piping Skid Connecting hoses Power unit 2-Stage drive motors Feed motor Pressure-balance system Consult the factory for special cutters and pilots required for tank taps. 936 Tapping Machine Sizes: 12- Through 36-inch T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5100 Fax: 918-446-6327 www.tdwilliamson.com Data subject to change without notic e. / Dimensions not for construction unless certified. / ® Registered trademar k of T.D. Williamson, Inc. in the United States and fore ign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countrie s / © Copyright 2009. All rights reserve d T.D. Williamson, Inc. / Printed in USA
-
Upload
joshua-scott -
Category
Documents
-
view
21 -
download
0
Transcript of tdw 936
-
5/19/2018 tdw 936
1/2
Description
Features
Toll Free
1-888-TDWmSon (839-6766)
Patented in the United States and in foreign countries.
ISO 9001 Certified
Tapping machines are used for makingconnections to pipelines, tanks, and plant pipingwithout shutdown and are used to make hot tapsin preparation for plugging machine applications.
The 936 Tapping Machine is hydraulicallyoperated and is used for making pipe and tank tapsfrom 12" to 36". Its operating temperature is
0F (-18C) to 180F (82C) at 2,220 psi (153 bar).For temperatures above 180F (82C), consult thefactory.
The 936 Tapping Machines unique pressurebalanced system eliminates the effects of pipelinepressure, reducing operating loads on thefeedscrew.
The 936 Tapping Machine meets NACE standardMR0175-93 (sulfide stress cracking resistantmetallic material for oilfield equipment).
Typical Tapping Setup
ValveAdapter
STOPPLEFitting
or Tapping Fitting
SA
Pipeline
936 Tapping Machine
Bulletin No:1000.009.02Date: April 2009Cross Indexing No: n/aSupersedes: 1000.009.01 (2/00
The basic machine includes:
Tapping machine
Ladder and platform
Hydraulic piping
Skid
Connecting hoses
Power unit
2-Stage drive motors
Feed motor
Pressure-balance systemConsult the factory for special cutters and pilots requiredfor tank taps.
936 Tapping MachineSizes: 12- Through 36-inch
T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5100 Fax: 918-446-6327 www.tdwilliamson.comData subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright 2009. All rights reserved T.D. Williamson, Inc. / Printed
-
5/19/2018 tdw 936
2/2
