Tds fs84 topcoat – solvent-based
-
Upload
fire-security-system -
Category
Documents
-
view
62 -
download
4
Transcript of Tds fs84 topcoat – solvent-based
Description Single component solvent based top coat for Fire Security intumescent coatings Properties FS84 is a halogen free, self-extinguishing, fast drying coating based on modified resin. Application Areas • Structural steel members as columns, beams, girders and framework
• 1/H-sections and Hollow Sections • Also on galvanized members • Excluded are steel constructions permanently stressed by ponding water due
to rainfall or condensation or aggressive gases Instructions for the Application of FS84
before top coating make sure that the fire retardant coating is dried through (test by finger nail!)
• temperature of FS84, ambient air and substrate > 5 °C • humidity < 80% • keep below dew point • FS84 can be applied by brush, roller or spray • tip size: airless: 0.009" - 0.013" • coverage rate: 130 - 180 g/m2 (depending on the colour shade) = wet about
130 μm = dry 60 μm • thinner: Xylene, max. 5% • if FS84 out of different batches must be applied, mix both materials before
using • gloss level depends on colour shade • colour shades containing metal pigments may modify by application by brush
or roller and by thinning Drying • The drying time depends on temperature and humidity. At a temperature of
approx. 20 °C and a humidity of approx. 65% the drying time is as follows: • dust dry after about 1 hour • ready for the next layer after about 24 hours • dried through after 48 hours
Transport / Storage • Shelf life: 12 months in unopened containers; storage at ambient temperatures.
Packaging • supplied in 5 kg, 10 kg and 25 kg tin pails. Precautions for Safety Use
Use FS84 in accordance with all applicable local and national regulations.
Environment Health and Safety
As regulations are often revised please request for the actual safety data sheet before using this product.
• Please contact us for groups of RAL colour shades • Special colour shades according Sikkens, NCS or sample available on request - minimum quantity
10kg Disclaimer: The above data, particularly the recommendations for the application and use of Fire Security products are based on the manufacturer's knowledge and experience. Due to different materials and conditions of application, which are beyond our control, we recommend in any case carrying out sufficient tests in order to ensure that Fire Security products are suitable for the intended processes and applications. Therefore, any liability for such recommendations or any oral advice is expressly excluded unless we have acted willfully or by gross negligence. It is always the responsibility of the installer / purchaser to guarantee correct preparation, DFT (Fire Security Coatings) and thickness (Fire Security Firestop Products) of all Fire Security products. Fire Security Systems is not liable for installation or faulty installation. It is always the responsibility of the installer / purchaser to guarantee and certify the installation of materials.
Technical Data Sheet FS84 Topcoat
FIRE SECURITY SYSTEMS Canada: PO Box 21096, Coquitlam BC V3E 3P9 Canada Tel:+1 604 941 1001 Fax: +1 604 648 9311 Norway: Skibåsen 20b -4636 Kristiansand Norway Tel:+ 47 95 47 80 00 Fax: +47 38 02 15 31 [email protected] www.Fire-Security.net
Dubai, UAE: Skibåsen 20b -4636 Kristiansand Norway Tel:+ 47 95 47 80 00 Fax: +47 38 02 15 31